首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 589 毫秒
1.
Petrological and geochemical variations are used to investigatethe formation of granite magma from diatexite migmatites derivedfrom metasedimentary rocks of pelitic to greywacke compositionat St. Malo, France. Anatexis occurred at relatively low temperaturesand pressures (<800°C, 4–7 kbar), principally throughmuscovite dehydration melting. Biotite remained stable and servesas a tracer for the solid fraction during melt segregation.The degree of partial melting, calculated from modal mineralogyand reaction stoichiometry, was <40 vol. %. There is a continuousvariation in texture, mineralogy and chemical composition inthe diatexite migmatites. Mesocratic diatexite formed when metasedimentaryrocks melted sufficiently to undergo bulk flow or magma flow,but did not experience significant melt–residuum separation.Mesocratic diatexite that underwent melt segregation duringflow generated (1) melanocratic diatexites at the places wherethe melt fraction was removed, leaving behind a biotite andplagioclase residuum (enriched in TiO2, FeOT, MgO, CaO, Sc,Ni, Cr, V, Zr, Hf, Th, U and REE), and (2) a complementary leucocraticdiatexite (enriched in SiO2, K2O and Rb) where the melt fractionaccumulated. Leucocratic diatexite still contained 5–15vol. % residual biotite (mg-number 40–44) and 10–20vol. % residual plagioclase (An22). Anatectic granite magmadeveloped from the leucodiatexite, first by further melt–residuumseparation, then through fractional crystallization. Most biotitein the anatectic granite is magmatic (mg-number 18–22). KEY WORDS: anatexis; diatexite; granite magma; melt segregation; migmatite  相似文献   

2.
Biotite‐rich selvedges developed between mafic schollen and semipelitic diatexite in migmatites at Lac Kénogami in the Grenville Province of Quebec. Mineral equilibria modelling indicates that partial melting occurred in the mid‐crust (4.8–5.8 kbar) in the range 820–850°C. The field relations, petrography, mineral chemistry and whole‐rock composition of selvedges along with their adjacent mafic schollen and host migmatites are documented for the first time. The selvedges measured in the field are relatively uniform in width (~1 cm wide) irrespective of the shape or size of their mafic scholle. In thin section, the petrographic boundary between mafic scholle and selvedge is defined by the appearance of biotite and the boundary between selvedge and diatexite by the change in microstructure for biotite, garnet, plagioclase and quartz. Three subtypes of selvedges are identified according to mineral assemblage and microstructure. Subtype I have orthopyroxene but of different microstructure and Mg# to orthopyroxene in the mafic scholle; subtype II contain garnet with many mineral inclusions, especially of ilmenite, in contrast to garnet in the diatexite host which has few inclusions; subtype III lack orthopyroxene or garnet, but has abundant apatite. Profiles showing the change in plagioclase composition from the mafic schollen across the selvedge and into the diatexite show that each subtype of selvedge has a characteristic pattern. Four types of biotite are identified in the selvedges and host diatexite based on their microstructural characteristics. (a) Residual biotite forms small rounded red‐brown grains, mostly as inclusions in peritectic cordierite and garnet in diatexite; (b) selvedge biotite forms tabular subhedral grains with high respect ratio; (c) diatexite biotite forms tabular subhedral grains common in the matrix of the diatexite; and (d) retrograde biotite that partially replaces peritectic cordierite and garnet in the diatexite. The four groups of biotite are also discriminated by their major element (EMPA) and trace elements (LA‐Q‐ICP‐MS) compositions. Residual biotite is high in TiO2 and low in Sc and S, whereas retrograde biotite has high Al2O3, but low Sc and Cr. Selvedge and diatexite biotite are generally very similar, but selvedge biotite has higher Sc and S contents. Whole‐rock compositional profiles across the selvedges constructed from micro‐XRF and LA‐Q‐ICP‐MS analyses show: (a) Al2O3, FeO, MgO and CaO all decrease from mafic scholle across the selvedge and into the diatexite; (b) Na2O is lowest in the mafic scholle, rises through the selvedge and reaches its maximum about 20–30 mm into the diatexite host; (c) K2O is lowest in the mafic scholle and reaches its highest value in the first half of the selvedge, then declines before reaching a higher, but intermediate value, about 20 mm into the diatexite. Of the trace elements, Cs and Rb show distributions very similar to K2O.  相似文献   

3.
A temperature–time path was constructed for high-temperature low-pressure (HT–LP) migmatites of the Bayerische Wald, internal zone of the Variscan belt, Germany. The migmatites are characterised by prograde biotite dehydration melting, peak metamorphic conditions of approximately 850 °C and 0.5–0.7 GPa and retrograde melt crystallisation at 800 °C. The time-calibration of the pressure–temperature path is based on U–Pb dating of single zircon and monazite grains and titanite separates, on 40Ar/39Ar ages obtained by incremental heating experiments on hornblende separates, single grains of biotite and K-feldspar, and on 40Ar/39Ar spot fusion ages of biotite determined in situ from sample sections. Additionally, crude estimates of the duration of peak metamorphism were derived from garnet zoning patterns, suggesting that peak temperatures of 850 °C cannot have prevailed much longer than 2.5 Ma. The temperature–time paths obtained for two areas approximately 30 km apart do not differ from each other considerably. U–Pb zircon ages reflect crystallisation from melt at 850–800 °C at 323 Ma (southeastern area) and 326 Ma (northwestern area). The U–Pb ages of monazite mainly coincide with those from zircon but are complicated by variable degrees of inheritance. The preservation of inherited monazite and the presence of excess 206Pb resulting from the incorporation of excess 230Th in monazite formed during HT–LP metamorphism suggest that monazite ages in the migmatites of the Bayerische Wald reflect crystallisation from melt at 850–800 °C and persistence of older grains at these temperatures during a comparatively short thermal peak. The U–Pb ages of titanite (321 Ma) and 40Ar/39Ar ages of hornblende (322–316 Ma) and biotite (313–309 Ma) reflect cooling through the respective closure temperatures of approximately 700, 570–500 and 345–310 °C published in the literature. Most of the feldspars' ages (305–296 Ma) probably record cooling below 150–300 °C, while two grains most likely have higher closure temperatures. The temperature–time paths are characterised by a short thermal peak, by moderate average cooling rates and by a decrease in cooling rates from 100 °C/my at temperatures between 850–800 and 700 °C to 11–16 °C/my at temperatures down to 345–310 °C. Further cooling to feldspar closure for Ar was probably even slower. The lack of decompressional features, the moderate average cooling rates and the decline of cooling rates with time are not easily reconciled with a model of asthenospheric heating, rapid uplift and extension due to lithospheric delamination as proposed elsewhere. Instead, the high peak temperatures at comparatively shallow crustal levels along with the short thermal peak require external advective heating by hot mafic or ultramafic material. Received: 7 July 1999 / Accepted: 28 October 1999  相似文献   

4.
The host mass consists of quartz diorite-porphyry (marginal facies), granodiorite porphry (intermediate facies) and granite porphry (central facies). The petrographical facies are asymmetrically spread. The formation temperature of the rock mass ranges from 890 to 800°C, the pressure from 330 to 380 bars and the depth from about 1.5 to 2 km. Mineralization is controlled by the N-E contact zone and adjacent fault structures. Mo-mineralization occurs in the granite porphyry with strong potash metasomatism. Cu-Mo-mineralization is distributed in the inner contact zone of the rock mass, and the wallrock is K-silicified granite porphyry. Cu-pyrite-mineralization is recognized in skarn and serpentinite. Pb-Zn ore veins occur in marbleized limestones. Rock and mineral analyses, fluid inclusion studies and highT-P experiments indicate that extensive precipitation of Cu-bearing pyrite took place atT = 290–250°C, andP = 330–380 bars and that of copper atT = 400–310°C andP = 330–380 bars. Precipitation of Pb and Zn was followed by the transformation of hydrothermal solutions from alkaline to intermediate with decreasing temperature.  相似文献   

5.
Metatexite and diatexite migmatites are widely distributed within the upper amphibolite and granulite facies zones of the Higo low‐P/high‐T metamorphic terrane. Here, we report data from an outcrop in the highest grade part of the granulite facies zone, in which diatexite occurs as a 3 m thick layer between 2 m thick layers of stromatic‐structured metatexite within pelitic gneiss. The migmatites and gneiss contain the same peak mineral assemblage of biotite + plagioclase + quartz + garnet + K‐feldspar with retrograde chlorite ± muscovite and some accessory minerals of ilmenite ± rutile ± titanite + apatite + zircon + monazite ± pyrite ± zinc sulphide ± calcite. Calculated metamorphic P–T conditions are 800–900 °C and 9–12 kbar. Zircon in the diatexite forms elongate euhedral crystals with oscillatory zoning, but no core–rim structure. Zircon from the gneiss and metatexite forms euhedral–subhedral grains comprising inherited cores overgrown by thin rims. The overgrowth rims in the metatexite have lower Th/U ratios than zircon in the diatexite and yield a 206Pb/238U age of 116.0 ± 1.6 Ma, which is older than the 110.1 ± 0.6 Ma 206Pb/238U age derived from zircon in the diatexite. Zircon from the diatexite has variable REE contents with convex upward patterns and flat normalized HREE, whereas the overgrowth rims in the metatexite and gneiss have steep HREE‐enriched patterns; however, both types have similar positive Ce and negative Eu anomalies. 176Hf/177Hf ratios in the overgrowth rims from the metatexite are more variable and generally lower than values from zircon in the diatexite. Based on U–Pb ages, trace element and Hf isotope data, the zircon rims in the metatexite are interpreted to have crystallized from a locally derived melt, following partial dissolution of inherited protolith zircon during anatexis, whereas the zircon in the diatexite is interpreted to have crystallized from a melt that included an externally derived component. By integrating zircon and petrographic data for the migmatites and pelitic gneiss, the metatexite migmatite is interpreted to have formed by in situ partial melting in which the melt did not migrate from the source, whereas the diatexite migmatite included an externally derived juvenile component. The Cretaceous high‐temperature metamorphism of the Higo metamorphic terrane is interpreted to reflect emplacement of mantle‐derived basalts under a volcanic arc along the eastern margin of the Eurasian continent and advection of heat via hybrid silicic melts from the lower crust. Post‐peak crystallization of anatectic melts in a high‐T region at mid‐crustal depths occurred in the interval c. 116–110 Ma, as indicated by the difference in zircon ages from the metatexite and diatexite migmatites.  相似文献   

6.
Metabasites with eclogite facies relics occur in northern Sardinia as massive to strongly foliated lenses or boudins embedded within low- to medium-grade rocks (Anglona) and migmatites (NE Sardinia). U–Pb zircon dating yielded 453 ± 14, 457 ± 2 and 460 ± 5 Ma as the protolith ages; 400 ± 10 and 403 ± 4 Ma have been interpreted as the ages of the HP event and 352 ± 3 and 327 ± 7 Ma as the ages of the main Variscan retrograde events. A pre-eclogite stage is documented by the occurrence of tschermakite, zoisite relics within garnet porphyroblasts (Punta de li Tulchi) and an edenite–andesine inclusion within a relict kyanite porphyroblast (Golfo Aranci). Four main metamorphic stages have been distinguished in the eclogite evolution: (1) eclogite stage, revealed by the occurrence of armoured omphacite relics within garnet porphyroblasts. The Golfo Aranci eclogites also include kyanite, Mg-rich garnet and pargasite; (2) granulite stage, producing orthopyroxene and clinopyroxene–plagioclase symplectites replacing omphacite. At Golfo Aranci, the symplectitic rims around relict kyanite consist of sapphirine, anorthite, corundum and spinel; (3) amphibolite stage, leading to the formation of amphibole–plagioclase kelyphites between garnet porphyroblasts and pyroxene–plagioclase symplectites and to the growth of cummingtonite on orthopyroxene. Tschermakite to Mg-hornblende, plagioclase, cummingtonite, ilmenite, titanite and biotite are coexisting phases; (4) greenschist to sub-greenschist stage, defined by the appearance of actinolite, chlorite, epidote ss, titanite, sericite and prehnite. The following P–T ranges have been estimated for the different stages. Eclogite stage 550–700°C; 1.3–1.7 GPa; granulite stage 650–900°C; 0.8–1.2 GPa, clustering in the range 1.0–1.2 GPa; amphibolite stage 550–740°C; 0.3–0.7 GPa; greenschist stage 300–400°C; 0.2–0.3 GPa. Comparable ranges characterise the other Variscan massifs in Europe; eclogite stage: T = 530–800°C; P from 0.7–1.1 to 1.7 ± 0.3 GPa; granulite stage T = 760–870°C and P from 1.1–1.4 to 7.2–9.9 GPa, clustering around 1.0–1.2 GPa. Whole-rock chemistry: Sardinian eclogites are N- to T-MORB; European ones N- to E-MORB or calc-alkaline.  相似文献   

7.
The country rock in southern Finland formed mainly during the Svecofennian orogeny ca. 1.9 Ga ago. The middle and lower crust was partially melted 1.83 Ga ago due to crustal thickening and subsequent extension. During this event, S-type migmatites and granites were formed along a 100×500 km zone. This Late Svecofennian Granite–Migmatite zone (LSGM zone) is a large crustal segment characterised by roughly E–W trending sub-horizontal migmatites and granites. Combined ductile E–W shear movements and NNW–SSE compressional movements defined a transpressional tectonic regime during the emplacement. Partial melts that moved through the crust pooled as granite sheets or froze as migmatites. Major transpressive shear zones border the LSGM zone, which forms a tectonic and metamorphic zone that crosscuts the earlier Svecofennian granitoids. Based on field observations and geochemical data from two sets of outcrops, we show that the great volumes of late-orogenic granites and migmatites in southern Finland were transported and emplaced as small chemically variable batches, possibly extracted from different protoliths. These melt batches were transported along repeatedly activated channels and collected at some horizontal level in the crust. In the Nagu area, the melt batches were trapped under a roof-layer of amphibolite and the whole complex was synchronously folded into open folds with steep axial surfaces and E–W trending fold axes. The sheets of microcline granite are, in places, strongly sheared; the microcline phenocrysts are imbricated and subsequent deformation of the microcline phenocrysts indicates syn-tectonic movements of the layers as well as a syn-tectonic mechanism for the late-magmatic fractionation. Depending on the degree of crystallisation of the individual melt batches during shearing at different intensities, the granites have slightly different appearances. Some sheared zones show a cumulate-like trace element geochemistry, indicating that melt fractions were expelled from the system, producing layers of deformation enhanced fractionated granites and cumulate layers. Our interpretation is that the Nagu area shows shear-assisted fractionation mechanisms in granitic melts, and that similar processes are responsible for the fractionation trends seen in the sub-horizontal sheeted granites in Hämeenlinna at higher levels in the crust.  相似文献   

8.
What controls partial melting in migmatites?   总被引：4，自引：0，他引：4  
Abstract The layers of six stromatic migmatites from Northern, Western, and Central Europe display small but systematic chemical and mineralogical differences. At least five of these migmatites do not show any signs of largescale metamorphic differentiation, metasomatism, or segregation of melts. It is concluded, therefore, that the compositional layering observed in most of the investigated migmatites is due to compositional differences inherited from the parent rocks. Almost isochemical partial melting seems to be the most probable process transforming layered paragneisses, metavolcanics, or schists into migmatites.
The formation of neosomes is believed to be caused by higher amounts of partial melts formed due to higher amounts of water moving into these layers. The neosomes have less biotite and more K-feldspar, if K-feldspar is present at all, than the adjacent mesosomes. These differences are small but systematic and seem to control the access of different amounts of water to the various rock portions. Petrographical observations, chemical data, and theoretical considerations indicate a close relationship between rock composition, rock deformation, transport of water, partial melting, and formation of layered migmatites.  相似文献   

9.
Metapelite-derived migmatites (“bedded migmatites”) formed in the low-pressure/high-temperature (LPHT) Cooma Complex, southeastern Australia, contain magma (neosome and leucosome) confined to the metapelitic beds in which they were generated. The metapsammitic beds were more ductile than the metapelitic beds (and the metapelitic parts of graded beds), which underwent fracture and boudinage, thereby providing space for the magma, though some also occurs in axial surface folia. Transitions from bedded to stromatic migmatites can be seen, but the magma mainly remained in the metapelites, even in the most strongly deformed stromatic migmatites. This, together with boudinage and transposition of the leucosome, as well as microstructural evidence of quartz recrystallization, suggest that much or most of the stromatic layering was formed by solid-state deformation. In contrast, magmas (neosomes) formed by partial melting of feldspathic metapsammites at Cooma moved out of their parent rocks, and coalesced into veins and small intrusions of diatexite, because (1) the host rocks deformed more homogeneously, and no interboudin space was made for the melts, and (2) the melt escape threshold was exceeded, probably with the assistance of deformation. Metapsammite melting occurred after solidification of the metapelite-derived magma, and the mobile metapsammite-derived magma (diatexite) disrupted and incorporated fragments of the metapelitic migmatites. The metapsammite-derived magma, together with this solid metapelitic material, locally coalesced into bodies closely resembling the Cooma Granodiorite.  相似文献   

10.
Gneisses and migmatites of the Gföhl unit (Moldanubian Zone, Bohemian Massif) range from banded mylonitic orthogneiss with recrystallized monomineralic bands, through stromatic (metatexite) and schlieren (inhomogeneous diatexite) migmatite, to isotropic nebulite (homogeneous diatexite). This sequence was classically attributed to increasing degree of anatexis. Under the microscope, the evolution is characterized by progressive destruction of the monomineralic banding that characterizes the original mylonitic orthogneiss. Throughout, the mineral assemblage is biotite–K‐feldspar–plagioclase–quartz ± garnet ± sillimanite, but the mineral compositions exhibit systematic changes with progressive disintegration of the layering. From banded orthogneiss to nebulite, the garnet composition changes systematically, Alm75→94Prp17→0.8Grs2.5→1.2Sps2→11 and XFe = 0.45→0.99 and for biotite, XFe = 0.80→1. This is consistent with a decrease in equilibration temperature and pressure of 790 °C and 8.5–6 kbar, to 690 °C and 5–4 kbar respectively. There is also a systematic change of whole‐rock composition, marked by an increase in SiO2 (71→77 wt%) and XFe (0.62→0.85) and by a decrease in Al2O3 (16→13 wt%) and CaO (1.50→0.43 wt%). Assuming that the rocks started with the same composition, these systematic changes indicate open‐system behaviour. The predicted consequences of various open‐system processes are assessed using thermodynamic modelling. The observed variations are interpreted as being a consequence of melt flow through, and interaction with the rocks, and, to change the rock composition sufficiently, a large volume of melt must have been involved.  相似文献   

11.
In-situ migmatite and hybrid diatexite at Mt Stafford, central Australia   总被引：3，自引：1，他引：3  
Metasedimentary gneisses show a rapid change in grade within a 10-km-wide low- P /high- T  regional aureole at Mt Stafford, Arunta Block, central Australia. Migmatites occur in all but the lowermost of five metamorphic zones, which are characterized by: (1) muscovite–quartz schist; (2) andalusite–cordierite–K-feldspar granofels with small melt segregations; (3) spinel–sillimanite–cordierite–K-feldspar migmatite; (4) garnet–orthopyroxene–cordierite migmatite and minor diatexite; and (5) biotite–cordierite–plagioclase diatexite that shows a transition to granite. A subsolidus unit comprising interbedded sandstone and siltstone is equivalent to bedded migmatite , the main rock type in Zones 2–4. Mesoscopic textures and migmatite classification of this unit vary with grade. In Zone 2, metatexite is developed in siltstone layers that are separated by quartz-rich, unmelted metapsammite layers. Melt segregation was less efficient in Zones 3 and 4, where the dominant migmatite layering is a modified bedding. High proportions of melt were present in Zone 4, in which schlieren migmatite is transitional between bedded migmatite and metapelite-sourced diatexite. The preservation of sedimentary structures and coexistence of melt reactants and products in Zone 4 metapelite imply that melting proceeded in situ without substantial migration of melt. Zone 5 biotite–cordierite–plagioclase diatexite carries rafts of bedded migmatite with strongly resorbed edges, as well as large K-feldspar and quartz augen. This unit of comparatively Ca-rich migmatites is inferred to have been formed by the mixing of locally derived and injected granitic melt.  相似文献   

12.
Summary In the Kutná Hora Complex, the Běstvina Formation, which is similar to Gf?hl granulite, contains eclogite that has escaped widespread retrograde recrystallization. The eclogite assemblage, garnet + omphacite + quartz + rutile ± plagioclase, yields an estimate for peak metamorphic conditions of 18–20 kbar and 835–935 °C, which is comparable to that determined from felsic granulite, 14–20 kbar and 900–1000 °C. Garnet in eclogite exhibits both prograde and retrograde compositional zoning, from which constraints on thermal history of the Gf?hl terrane can be derived by diffusion modelling. At 900 °C, a garnet grain of 800–1000 μm radius would homogenize in 7.5–11.7 million years, but the existence of compositional gradients on a length scale of 100–200 μm suggests that the duration of peak metamorphism may have been limited to ∼500,000 years. Diffusion modelling of retrograde zoning in garnet yields a cooling rate of 150–100 °C/m.y. for a radius of 800–1000 μm and initial temperature of 900 °C. The relatively brief duration of high-pressure/high-temperature metamorphism and rapid cooling and exhumation of the Gf?hl terrane may be a consequence of lithospheric delamination during Early Carboniferous collision of Bohemia (Teplá-Barrandia) and Moldanubia (Franke, 2000).  相似文献   

13.
Permian granulites associated with noritic intrusions and websterites are a common feature of the post-Variscan European crust. Such granulites are common in the Southern Alps (e.g. Ivrea Zone), but occur only in the Gruf Complex in the Central Alps. To understand the geotectonic significance of these granulites, in particular in the context of Alpine migmatisation, zircons from 15 high-grade samples have been U–Pb dated by SHRIMP II analysis. Oscillatory zoned zircons from charnockite sheets, interpreted as melts generated through granulite facies fluid-absent biotite melting at 920–940°C, yield ages of 282–260 Ma. Some of these zircons contain inclusions of opx, unequivocally attributable to the granulite facies, thus confirming a Permian age for the charnockites and associated granulites. Two samples from an enclave-rich orthogneiss sheet yield Cambrian and Ordovician zircon cores. Two deformed leucogranites and six ortho- and augengneisses, which compose two-thirds of the Gruf Complex, give zircon ages of 290–260 Ma. Most zircons have milky rims with ages of 34–29 Ma. These rims date the Alpine amphibolite facies migmatisation, an interpretation confirmed by directly dating a leucosome pocket from upper amphibolite facies metapelites. The Gruf charnockites associated with metre-scale schlieren and boudins of opx–sapphirine–garnet–granulites, websterites and gabbronorites can thus be identified as part of the post-Variscan European lower crust. A geotectonic reconstruction reveals that this piece of lower crust stranded in the (European) North upon rifting of the Neotethys, such contrasting the widespread granulite units in the Southern Alps. Emplacement of the Gruf lower crust into its present-day position occurred during migmatisation and formation of the Bergell Pluton in the aftermath of the breakoff of the European slab.  相似文献   

14.
Garnet-spinel peridotites form small, isolated, variably retrogressed bodies within the low-pressure high-temperature gneisses and migmatites of the Variscan basement of the Schwarzwald, southwest Germany. Detailed mineralogical and textural studies as well as geothermobarometric calculations on samples from three occurrences are presented. Two of the garnet-spinel peridotites have equilibrated at 680–770°C, 1.4–1.8 GPa within the garnet-spinel peridotite stability field, one of the samples having experienced an earlier stage within the spinel peridotite stability field (790°C, <1.8 GPa). The third sample, with only garnet and spinel preserved, probably equilibrated within the garnet peridotite stability field at higher pressures. These findings are in line with the distinction of two groups of ultramafic garnet-bearing high-pressure rocks with different equilibration conditions within the Schwarzwald (670–740°C, 1.4–1.8 GPa and 740–850°C, 3.2–4.3 GPa) which has previously been established (Kalt et al. 1995). The equilibration conditions of 670–770°C and 1.4–1.8 GPa for garnet-spinel peridotites from the Central Schwarzwald Gneiss Complex (CSGC) are similar to those for eclogites of the Schwarzwald and also correspond quite well to those for garnet-spinel peridotites from the Moldanubian zone of the Vosges mountains and of ecologites from the Moldanubian s.str. of the Bohemian Massif.  相似文献   

15.
Migmatite structures in the Central Gneiss Complex, Boca de Quadra, Alaska   总被引：3，自引：0，他引：3  
Abstract Migmatite structures in the Coast Plutonic-Metamorphic Complex are well exposed in the inlet of Boca de Quadra, southeast Alaska. Two types of anatectic migmatites are present. Patch migmatites formed by in situ melting and subsequent crystallization of melt. Diktyonitic migmatites comprise a discontinuous veined network of leucocratic material, in which leucosomes enclose boudins of host rock. The margins of these boudins show the development of both melanosomes and shear band fabrics.
Strain analysis of diktyonitic melanosomes indicates that these regions have undergone volume decreases of 20-27%. This volume decrease is attributed to melt extraction into the adjacent fracture-filling leucosomes. Thus, diktyonitic migmatites formed by shear-induced segregation of partial melt, whereas in patch migmatites the lack of shear stresses inhibited melt segregation. The variable structural style of anatectic migmatites in Boca de Quadra is not related to host-rock composition, but may be due to differences in the amount of differential stress during migmatization. These in turn may be controlled by host-rock strength and/or diachroneity of migmatization and deformation.
Determination of volume changes during migmatization using strain analysis is potentially capable of discriminating intrusive and anatectic migmatites and consequently of documenting melt segregation and subsequent migration across crustal levels.  相似文献   

16.
  相似文献   

17.
Fluid–rock interaction was investigated in the inner aureole of the Late Miocene Monte Capanne pluton on Elba Island (Tuscany, central Italy) by integrating structural, petrological, fluid inclusion, and stable isotope analyses. In the north-western sector of the aureole (Procchio–Spartaia area), calc–silicates alternate with nearly pure carbonate layers at the metre scale. Close to the pluton, the prograde metamorphic sequence includes calc–silicates that transition within a few metres to overlying nearly pure calcite marbles. The calc–silicates are extensively metasomatised to form massive wollastonite-grossular-bearing exoskarn. The mineralogical assemblage found in the marbles and the unshifted carbon and oxygen isotopic ratios in calcite attest that the fluid phase was internally buffered. On the other hand, the calc–silicates constituted channels for infiltration of disequilibrium fluids of magmatic origin. Fluid infiltration was enhanced by hydrofracturing and structurally-controlled by existing planar anisotropies in calc–silicates (layering and lithological boundaries). At the metamorphic peak (∼600°C and 1.5–2 kbar), the marble–calc–silicate interface acted as a barrier to fluids exsolved from the crystallising intrusions, separating two different flow patterns in the inner aureole: a high fluid–flux region on its higher grade side (Wol-zone) and a low fluid–flux region on the lower-grade side (Cpx zone). Results of this study: (1) documented that fluid pathways in the aureole rocks at the top of the pluton were largely horizontal, controlled by the lithological layering and the pluton–host rock contact; and (2) elucidated the primary control exerted by the structural and rheological properties of the host rocks on the geometry of fluid flow during pluton emplacement.  相似文献   

18.
 In the central Vetreny Belt, southeastern Baltic Shield, an areally extensive 110 m deep lava lake is exposed consisting of remarkably fresh differentiated komatiitic basalt. During eruption, the liquid had a temperature of 1380–1400 °C and contained ∼15% MgO. The lava ponded in a large topographic depression soon after eruption. The differentiation of the lava lake was controlled by settling of transported olivine and chromite phenocrysts and caused the origin of prominent internal layering. The last portions of the trapped liquid crystallized at temperatures of 1250– 1070 °C. A Sm-Nd isochron of 2410±34 Ma for whole rock samples, olivine, augite and pigeonite separates from the lava lake provides a reliable estimate for the time of formation of the uppermost sequences in the Vetreny Belt. This age is in good agreement with the Sm-Nd and Pb-Pb isochron ages of 2449±35 and 2424±178 Ma for the volcanic rocks from the same stratigraphic level in the northwestern Vetreny Belt. Modeling of Nd-isotopes and major and trace elements shows that the komatiitic basalts at Lion Hills may have had a komatiite parent depleted in highly incompatible elements. It can be shown that this initial liquid was contaminated by 7–9% of Archaean upper crustal material from the adjacent Vodla and Belomorian Blocks en route to the surface thus acquiring the observed geochemical and isotope signatures including relative enrichment in Zr, Ba, and LREE, negative Nb- and Ti-anomalies and ɛNd(T) of −1. Received: 8 December 1995/Accepted: 26 March 1996  相似文献   

19.
The beginning of melting in the system Qz-Or-Ab-An-H2 O was experimentally reversed in the pressure range kbar using starting materials made up of mixtures of quartz and synthetic feldspars. With increasing pressure the melting temperature decreases from 690° C at 2 kbar to 630° C at 17 kbar in the An-free alkalifeldspar granite system Qz-Or-Ab-H2O. In the granite system Qz-Or-Ab-An-H2O the increase of the solidus temperature with increasing An-content is only very small. In comparison to the alkalifeldspar granite system the solidus temperature increases by 3° C (7° C) if albite is replaced by plagioclase An 20 (An 40). The difference between the solidus temperatures of the alkalifeldspar granite system and of quartz — anorthite — sanidine assemblages (system Qz-Or-An-H2O) is approximately 50° C. With increasing water pressures plagioclase and plagioclase-alkalifeldspar assemblages become unstable and are replaced by zoisite+kyanite+quartz and zoisite+muscovite-paragonitess +quartz, respectively. The pressure stability limits of these assemblages are found to lie between 6 and 16 kbar at 600° C. At high water pressures (10–18 kbar) zoisite — muscovite — quartz assemblages are stable up to 700 and 720° C. The solidus curve of this assemblage is 10–20° C above the beginning of melting of sanidine — zoisite — muscovite — quartz mixtures. The amount of water necessary to produce sufficient amounts of melt to change a metamorphic rock into a magmatic looking one is only small. In case of layered migmatites it is shown that 1 % of water (or even less) is sufficient to transform portions of a gneiss into (magmatic looking) leucosomes. High grade metamorphic rocks were probably relatively dry, and anatectic magmas of granitic or granodioritic composition are usually not saturated with water.  相似文献   

20.
Based on the theoretical modelling of water-rock δD-δ18O isotopic exchange process, the evolution and sources of ore-forming fluid in four metallogenic epochs of the Jinduicheng superlarge-scale porphyry-type molybdenum deposit were investigated. It was revealed that in the pre-metallogenic and early-metallogenic epochs, the ore-forming fluid was a residual fluid derived from magmatic water-wall rock interaction at middle to high temperatures (T = 250–500°C) and lower W/R ratios (0.1> = W/R>0.001), while in the metallogenic and postmetallogenic epochs, the ore-forming fluid was a residual fluid derived from meteoric water-wall rock interaction at middle to lower temperatures (T = 150–310°C) and relatively high W/R ratios (0.5>W/R≥0.1). The meteoric water played an important role in molybdenum mineralization, and at the main metallogenic epoch the W/R ratio reached its maximum value. This project was financially supported by both the National Natural Science Foundation of China and the Key Research Project of the Ministry of Geology and Mineral Resources of China.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号