首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 577 毫秒
1.
The Palinuro volcanic complex and the Panarea hydrothermal field, both located in the Tyrrhenian Sea (Italy), are associated with island arc magmatism and characterized by polymetallic sulfide mineralization. Dissolved sulfide concentrations, pH, and Eh measured in porewaters at both sites reveal a variable hydrothermal influence on porewater chemistry.Multiple sulfur isotopic measurements for disseminated sulfides (CRS: chromium reducible sulfur) extracted from sediments at Palinuro yielded a broad range in δ34S range between ?29.8 and + 10.2‰ and Δ33S values between + 0.015 and + 0.134‰. In contrast, sediments at Panarea exhibit a much smaller range in δ34SCRS with less negative values between ?11.3 and ?1.8‰. The sulfur isotope signatures are interpreted to reflect a mixture between hydrothermal and biogenic sulfide, with a more substantial biogenic contribution at Panarea.Multiple sulfur isotope measurements were performed on sulfides and elemental sulfur from drill core material from the Palinuro massive sulfide complex. δ34S and Δ33S values for pyrite between ?32.8 and ?1.1‰ and between ?0.012 to + 0.042‰, respectively, as well as for elemental sulfur with δ34S and Δ33S values between ?26.7 and ?2.1‰ and between + 0.035 and + 0.109‰, respectively, point to a microbial origin for much of the sulfide and elemental sulfur studied. Moreover, data suggest a coupling of bacterial sulfate reduction, sulfide oxidation and sulfur disproportionation. In addition, δ34S values for barite between + 25.0 and + 63.6‰ are also in agreement with high microbial turnover of sulfate at Palinuro.Although a magmatic SO2 contribution towards the formation of the Palinuro massive sulfide complex is very likely, the activity of different sulfur utilizing microorganisms played a fundamental role during its formation. Thus, porewater and multiple sulfur isotope data reveal differences in the hydrothermal activity at Palinuro and Panarea drill sites and underline the importance of microbial communities for the origin of massive sulfide mineralizations in the hydrothermal subsurface.  相似文献   

2.
Large rounded pyrite grains (>1 mm), commonly referred to as “buckshot” pyrite grains, are a characteristic feature of the auriferous conglomerates (reefs) in the Witwatersrand and Ventersdorp supergroups, Kaapvaal Craton, South Africa. Detailed petrographic analyses of the reefs indicated that the vast majority of the buckshot pyrite grains are of reworked sedimentary origin, i.e., that the pyrite grains originally formed in the sedimentary environment during sedimentation and diagenesis. Forty-one of these reworked sedimentary pyrite grains from the Main, Vaal, Basal, Kalkoenkrans, Beatrix, and Ventersdorp Contact reefs were analyzed for their multiple sulfur isotope compositions (δ34S, Δ33S, and Δ36S) to determine the source of the pyrite sulfur. In addition, five epigenetic pyrite samples (pyrite formed after sedimentation and lithification) from the Middelvlei and the Ventersdorp Contact reefs were measured for comparison. The δ34S, Δ33S, and Δ36S values of all 41 reworked sedimentary pyrite grains indicate clear signatures of mass-dependent and mass-independent fractionation and range from ?6.8 to +13.8?‰, ?1.7 to +1.7?‰, and ?3.9 to +0.9?‰, respectively. In contrast, the five epigenetic pyrite samples display a very limited range of δ34S, Δ33S, and Δ36S values (+0.7 to +4.0?‰, ?0.3 to +0.0?‰. and ?0.3 to +0.1?‰, respectively). Despite the clear signatures of mass-independent sulfur isotope fractionation, very few data points plot along the primary Archean photochemical array suggesting a weak photolytic control over the data set. Instead, other factors command a greater degree of influence such as pyrite paragenesis, the prevailing depositional environment, and non-photolytic sulfur sources. In relation to pyrite paragenesis, reworked syngenetic sedimentary pyrite grains (pyrite originally precipitated along the sediment-water interface) are characterized by negative δ34S and Δ33S values, suggesting open system conditions with respect to sulfate supply and the presence of microbial sulfate reducers. On the contrary, most reworked diagenetic sedimentary pyrite grains (pyrite originally precipitated below the sediment-water interface) show positive δ34S and negative Δ33S values, suggesting closed system conditions. Negligible Δ33S anomalies from epigenetic pyrite suggest that the sulfur was sourced from a mass-dependent or isotopically homogenous metamorphic/hydrothermal fluid. Contrasting sulfur isotope compositions were also observed from different depositional environments, namely fluvial conglomerates and marine-modified fluvial conglomerates. The bulk of the pyrite grains from fluvial conglomerates are characterized by a wide range of δ34S values (?6.2 to +4.8?‰) and small Δ33S values (±0.3?‰). This signature likely represents a crustal sulfate reservoir derived from either volcanic degassing or from weathering of sulfide minerals in the hinterland. Reworked sedimentary pyrite grains from marine-modified fluvial conglomerates share similar isotope compositions, but also produce a positive Δ33S/δ34S array that overlaps with the composition of Archean barite, suggesting the introduction of marine sulfur. These results demonstrate the presence of multiple sources of sulfur, which include atmospheric, crustal, and marine reservoirs. The prevalence of the mass-dependent crustal sulfur isotope signature in fluvial conglomerates suggests that sulfate concentrations were probably much higher in terrestrial settings in comparison to marine environments, which were sulfate-deficient. However, the optimum conditions for forming terrestrial sedimentary pyrite were probably not during fluvial progradation but rather during the early phases of flooding of low angle unconformities, i.e., during retrogradational fluvial deposition, coupled in some cases with marine transgressions, immediately following inflection points of maximum rate of relative sea level fall.  相似文献   

3.
The role of sulfur in two hydrothermal vent systems, the Logatchev hydrothermal field at 14°45′N/44°58′W and several different vent sites along the southern Mid-Atlantic Ridge (SMAR) between 4°48′S and 9°33′S and between 12°22′W and 13°12′W, is examined by utilizing multiple sulfur isotope and sulfur concentration data. Isotope compositions for sulfide minerals and vent H2S from different SMAR sites range from + 1.5 to + 8.9‰ in δ34S and from + 0.001 to + 0.051‰ in Δ33S. These data indicate mixing of mantle sulfur with sulfur from seawater sulfate. Combined δ34S and Δ33S systematics reveal that vent sulfide from SMAR is characterized by a sulfur contribution from seawater sulfate between 25 and 33%. This higher contribution, compared with EPR sulfide, indicates increased seawater sulfate reduction at MAR, because of a deeper seated magma chamber and longer fluid upflow path length, and points to fundamental differences with respect to subsurface structures and fluid evolution at slow and fast spreading mid-ocean ridges.Additionally, isotope data uncover non-equilibrium isotopic exchange between dissolved sulfide and sulfate in an anhydrite bearing zone below the vent systems at fluid temperatures between 335 and 400 °C. δ34S values between + 0.2 to + 8.8‰ for dissolved and precipitated sulfide from Logatchev point to the same mixing process between mantle sulfur and sulfur from seawater sulfate as at SMAR. δ34S values between ? 24.5 and + 6.5‰ and Δ33S values between + 0.001 and + 0.125‰ for sulfide-bearing sediments and mafic/ultramafic host rocks from drill cores taken in the region of Logatchev indicate a clear contribution of biogenic sulfides formed via bacterial sulfate reduction. Basalts and basaltic glass from SMAR sites with Δ33S = ? 0.008‰ reveal lower Δ33S lower values than suggested on the basis of previously published isotopic measurements of terrestrial materials.We conclude that the combined use of both δ34S and Δ33S provides a more detailed picture of the sulfur cycling in hydrothermal systems at the Mid-Atlantic Ridge and uncovers systematic differences to hydrothermal sites at different mid-ocean ridge sites. Multiple sulfur isotope measurements allow identification of incomplete isotope exchange in addition to isotope mixing as a second important factor influencing the isotopic composition of dissolved sulfide during fluid upflow. Furthermore, based on Δ33S we are able to clearly distinguish biogenic from hydrothermal sulfides in sediments even when δ34S were identical.  相似文献   

4.
Multiple sulfur isotope ratios （^34S/^33S/^32S） of Archean bedded sulfides deposits were measured in the Yanlingguan Formation of the Taishan Group in Xintai, Shandong Province, East of China; 633S = -0.7%o to 3.8‰,δ^34S = 0.1‰-8.8‰, △^33S = -2.3‰ to -0.7‰. The sulfur isotope compositions show obvious mass-independent fractionation （MIF） signatures. The presence of MIF of sulfur isotope in Archean sulfides indicates that the sulfur was from products of photochemical reactions of volcanic SO2 induced by solar UV radiation, implying that the ozone shield was not formed in atmosphere at that time, and the oxygen level was less than 10-5 PAL （the present atmosphere level）. The sulfate produced by photolysis of SO2 with negative △^33S precipitated near the volcanic activity center; and the product of element S with positive △^33S precipitated far away from the volcanic activity center. The lower △^33S values of sulfide （-2.30‰ to --0.25‰） show that Shihezhuang was near the volcanic center, and sulfur was mostly from sulfate produced by photolysis. The higher △^33S values （-0.5‰ to -‰） indicate that Yanlingguan was far away from the volcanic center and that some of sulfur were from sulfate, another from element S produced by photolysis. The data points of sulfur isotope from Yanlingguan are in a line parallel to MFL （mass dependent fractionation line） on the plot of δ^34S--δ^33S, showing that the volcanic sulfur species went through the atmospheric cycle into the ocean, and then mass dependent fractionation occurred during deposition of sulfide. The data points of sulfur isotope from Shihezhuang represent a mix of different sulfur source.  相似文献   

5.
The source of sulfur in giant Norilsk-type sulfide deposits is discussed. A review of the state of the problem and a critical analysis of existing hypotheses are made. The distribution of δ34S in sulfides of ore occurrences and small and large deposits and in normal sedimentary, metamorphogenic, and hypogene sulfates is considered. A large number of new δ34S data for sulfides and sulfates in various deposits, volcanic and terrigenous rocks, coals, graphites, and metasomatites are presented. The main attention is focused on the objects of the Norilsk and Kureika ore districts. The δ34S value varies from -14 to + 22.5‰ in sulfides of rocks and ores and from 15.3 to 33‰ in anhydrites. In sulfide-sulfate intergrowths and assemblages, δ34S is within 4.2-14.6‰ in sulfides and within 15.3-21.3‰ in anhydrites. The most isotopically heavy sulfur was found in pyrrhotite veins in basalts (δ34S = 21.6‰), in sulfate veins cutting dolomites (δ34S = 33‰), and in subsidence caldera sulfates in basalts (δ34S = 23.2-25.2‰). Sulfide ores of the Tsentral’naya Shilki intrusion have a heavy sulfur isotope composition (δ34S = + 17.7‰ (n = 15)). Thermobarogeochemical studies of anhydrites have revealed inclusions of different types with homogenization temperatures ranging from 685 °C to 80 °C. Metamorphogenic and hypogene anhydrites are associated with a carbonaceous substance, and hypogene anhydrites have inclusions of chloride-containing salt melts. We assume that sulfur in the trap sulfide deposits was introduced with sulfates of sedimentary rocks (δ34S = 22-24‰). No assimilation of sulfates by basaltic melt took place. The sedimentary anhydrites were “steamed” by hydrocarbons, which led to sulfate reduction and δ34S fractionation. As a result, isotopically light sulfur accumulated in sulfides and hydrogen sulfide, isotopically heavy sulfur was removed by aqueous calcium sulfate solution, and “residual” metamorphogenic anhydrite acquired a lighter sulfur isotope composition as compared with the sedimentary one. The wide variations in δ34S in sulfides and sulfates are due to changes in the physicochemical parameters of the ore-forming system (first of all, temperature and Pch4) during the sulfate reduction. The regional hydrocarbon resources were sufficient for large-scale ore formation.  相似文献   

6.
The Prominent Hill deposit is a world-class iron oxide copper–gold (IOCG) deposit in South Australia, characterized by a high Cu/S ratio of the dominant Cu-(Fe) sulfides hosted by hematite breccias. It contains a total resource of 278 Mt of ore at 0.98% Cu and 0.75 g/t Au. Prominent Hill is one of several IOCG deposits and numerous prospects in the Olympic IOCG province that are temporally associated with the 1603–1575 Ma Gawler Range Volcanics, a large igneous province including co-magmatic granitoid intrusions of the Hiltaba Suite. Globally, IOCG deposits share many similar features in terms of their geological environment and mineral association. However, it is not yet clear whether sulfur and copper originate from the same source rocks and which hydrothermal redox processes created the characteristic iron oxide enrichment. Highly variable sulfur isotope compositions of sulfides and sulfates in IOCG deposits have previously been interpreted in terms of diverse sulfur sources that may include contributions from magmatic, sedimentary, seawater or evaporitic sulfur. In order to test these alternatives, we performed a detailed sulfur isotope study of Cu-(Fe) sulfides from Prominent Hill and IOCG prospects nearby. The Prominent Hill deposit shows a wide range in δ34SV-CDT between − 33.5‰ and 29.9‰ for Cu-(Fe) sulfides, and a narrower range of 4.3‰ to 15.8‰ for barite. Iron sulfides (pyrite, pyrrhotite) show a narrow range in sulfur isotope composition, whereas Cu-bearing sulfides show a much wider range, and more negative δ34SV-CDT values on average. We propose a two-stage sulfide mineralization model for the IOCG system in the Prominent Hill area, in which all hydrothermal sulfur is ultimately derived from a magmatic source that had a composition of 4.4 ± 2‰. The diversity in sulfur isotope composition can be produced by different fluid evolution pathways along reducing or oxidizing trajectories. A reduced sulfur evolution pathway is responsible for stage I mineralization, when intrusion-derived magmatic-hydrothermal fluids produced early pyrite and minor chalcopyrite at Prominent Hill, and iron ± copper sulfides in regional magnetite skarns and in some pervasively altered volcanic rocks of the Gawler Range Volcanics. Shallow-venting magmatic-hydrothermal fluids and subaerial volcanic gases that became completely oxidized by reaction with atmospheric oxygen produced sulfate and sulfuric acid with a sulfur isotope composition equal to their magmatic source. This highly oxidized ore fluid probably consisted dominantly of water from the hydrosphere, but contained magmatic solute components, notably sulfate, acidity and Cu. Sulfate reduction produced hydrothermal Cu sulfides with a wide range in sulfur isotope compositions from very negative to moderately positive values. Partial reaction of the Cu-rich stage II fluid with earlier stage I sulfides resulted in mixing of sulfur derived from sulfate reduction and from sulfides deposited during stage I. Modeling of the sulfur isotope fractionation processes in response to reducing and oxidizing pathways demonstrates that the entire spectrum of sulfur isotope data from stage I and stage II mineralization can be explained with a single, ultimately magmatic sulfur source. Such a magmatic sulfur source is also adequate to explain the complete spectrum of sulfur isotope data of other IOCG prospects and deposits in the Olympic province, including Olympic Dam. The results of our study challenge the conventional model that suggests the requirement of multiple and compositionally diverse sulfur sources in hematite-breccia hosted IOCG style mineralization.  相似文献   

7.
The Ohori ore deposit is one of the Cu–Pb–Zn deposits in the Green Tuff region, NE Japan, and consists of skarn‐type (Kaninomata) and vein‐type (Nakanomata) orebodies. The former has a unique origin because its original calcareous rocks were made by hydrothermal precipitation during Miocene submarine volcanism. Carbon and oxygen isotope ratios of skarn calcite and sulfur isotope ratios of sulfides were measured in and around the deposit. Carbon and oxygen isotope ratios of the skarn calcite are δ13C = ?15.51 to ?5.1‰, δ18O = +3.6 to +22.5‰. δ13C values are slightly lower than those of the Cretaceous skarn deposits in Japan. These isotope ratios of the Kaninomata skarn show that the original calcareous rocks resemble the present submarine hydrothermal carbonates at the CLAM Site, Okinawa Trough, than Cenozoic limestones, even though some isotopic shifts had occurred during later skarnization. δ34S ratios of the sulfide minerals from the Kaninomata and Nakanomata orebodies are mostly in a narrow range of +4.0 to +7.0‰ and they resemble each other, suggesting the same sulfur origin for the both deposits. The magnetite‐series Tertiary Kaninomatasawa granite is distributed just beneath the skarn layer and has δ34S ratios of +7.5 to 8.1‰. The heavy sulfur isotope ratio of the skarn sulfides may have been affected by the Kaninomatasawa granite.  相似文献   

8.
Sulfur mass-independent fractionation (S-MIF) preserved in Archean sedimentary pyrite is interpreted to reflect atmospheric chemistry. Small ranges in Δ33S that expanded into larger fractionations leading up to the Great Oxygenation Event (GOE; 2.45–2.2 Ga) are disproportionately represented by sequences from the Kaapvaal and Pilbara Cratons. These patterns of S-MIF attenuation and enhancement may differ from the timing and magnitude of minor sulfur isotope fractionations reported from other cratons, thus obscuring local for global sulfur cycling dynamics. By expanding the Δ33S record to include the relatively underrepresented São Francisco Craton in Brazil, we suggest that marine biogeochemistry affected S-MIF preservation prior to the GOE. In an early Neoarchean sequence (2763–2730 Ma) from the Rio das Velhas Greenstone Belt, we propose that low δ13Corg (<?30‰) and dampened Δ33S (0.4‰ to ?0.7‰) in banded iron formation reflect the marine diagenetic process of anaerobic methane oxidation. The overlying black shale (TOC up to 7.8%) with higher δ13Corg (?33.4‰ to ?19.2‰) and expanded Δ33S (2.3‰ ± 0.8‰), recorded oxidative sulfur cycling that resulted in enhance preservation of S-MIF input from atmospheric sources of elemental sulfur. The sequence culminates in a metasandstone, where concomitant changes to more uniform δ13Corg (?30‰ to ?25‰), potentially associated with the RuBisCO I enzyme, and near-zero Δ33S (?0.04‰ to 0.38‰) is mainly interpreted as evidence for local oxygen production. When placed in the context of other sequences worldwide, the Rio das Velhas helps differentiate the influences of global atmospheric chemistry and local marine diagenesis in Archean biogeochemical processes. Our data suggest that prokaryotic sulfur, iron, and methane cycles might have an underestimated role in pre-GOE sulfur minor isotope records.  相似文献   

9.
A laser fluorination microprobe system has been constructed for high-accuracy, high-precision multisulfur isotope analysis with improved spatial resolution. The system uses two lasers: (a) a KrF excimer laser for in situ spot analysis by ultraviolet (UV) photoablation with λ = 248 nm and (b) a CO2 laser for whole-grain analysis of powdered samples by infrared heating at λ = 10.6 μm. A CO2 laser is necessary for the analysis of interlaboratory isotope reference materials because they are supplied as powders. The δ34S and δ33S compositions of reference materials measured with a CO2 laser fluorination system agree (±0.2‰, 1σ) with the recommended values by the Sulfur Isotope Working Group of the International Atomic Energy Agency [Ding et al 2001] and [Taylor]. The precision of replicate analyses of powdered sulfide minerals with the CO2 laser is typically ±0.2‰ (1σ) for δ34S.The in situ fluorination of sulfides with a KrF excimer laser (λ = 248 nm) was validated by comparison of measurements of side-by-side laser craters and powders excavated from drill holes. Powders from drill holes were analyzed with the CO2 laser. In situ laser craters and drill hole powders give the same δ34SV-CDT and δ33SV-CDT values within 0.2‰. The δ34SV-CDT and δ33SV-CDT values of both powders and in situ analyses are independent of F2 gas pressure over a range of 15 to 65 torr. No dependence of δ34SV-CDT and δ33SV-CDT values on UV laser energy fluence has been observed. Mineral-specific fractionation of sulfur isotopes in analyzing pyrite, sphalerite, galena, troilite, and chalcopyrite has not been observed with a KrF excimer laser (λ = 248 nm). Test analyses with an ArF excimer laser (λ = 193 nm), however, gave fractionated sulfur isotope ratios.A range of Δ33S anomalies of from - 1.5 to +3.0‰ in Archean samples from the North Pole district, Pilbara Craton, Australia, and from black shale of the Lokamonna Formation, South Africa, were verified by in situ analysis of individual pyrite grains with a KrF excimer laser. These results show that a combination of high-accuracy, high-precision analyses with improved spatial resolution permits locating and analyzing host minerals of non-mass-dependent sulfur isotope anomalies.  相似文献   

10.
Greenstone belts contain several clues about the evolutionary history of primitive Earth. Here, we describe the volcano-sedimentary rock association exposed along the eastern margin of the Gavião Block, named the Northern Mundo Novo Greenstone Belt (N-MNGB), and present data collected with different techniques, including U–Pb–Hf–O isotopes of zircon and multiple sulfur isotopes (32S, 33S, 34S, and 36S) of pyrite from this supracrustal sequence. A pillowed metabasalt situated in the upper section of the N-MNGB is 3337 ± 25 Ma old and has zircon with εHf(t) =  ?2.47 to ?1.40, Hf model ages between 3.75 Ga and 3.82 Ga, and δ18O = +3.6‰ to +7.3‰. These isotopic data, together with compiled whole-rock trace element data, suggest that the mafic metavolcanic rocks formed in a subduction-related setting, likely a back-arc basin juxtaposed to a continental arc. In this context, the magma interacted with older Eoarchean crustal components from the Gavião Block. Detrital zircons from the overlying quartzites of the Jacobina Group are sourced from Paleoarchean rocks, in accordance with previous studies, yielding a maximum depositional age of 3353 ± 22 Ma. These detrital zircons have εHf(t) =  ?5.40 to ?0.84, Hf model ages between 3.66 Ga and 4.30 Ga, and δ18O = +4.8‰ to +6.4‰. The pyrite multiple sulfur isotope investigation of the 3.3 Ga supracrustal rocks from the N-MNGB enabled a further understanding of Paleoarchean sulfur cycling. The samples have diverse isotopic compositions that indicate sulfur sourced from distinct reservoirs. Significantly, they preserve the signal of the anoxic Archean atmosphere, expressed by MIF-S signatures (Δ33S between ?1.3‰ to +1.4‰) and a Δ36S/Δ33S slope of ?0.81 that is indistinguishable from the so-called Archean array. A BIF sample has a magmatic origin of sulfur, as indicated by the limited δ34S range (0 to +2‰), Δ33S ~ 0‰, and Δ36S ~ 0‰. A carbonaceous schist shows positive δ34S (2.1‰–3.5‰) and elevated Δ33S (1.2‰–1.4‰) values, with corresponding negative Δ36S between ?1.2‰ to ?0.2‰, which resemble the isotopic composition of Archean black shales and suggest a source from the photolytic reduction of elemental sulfur. The pillowed metabasalt displays heterogeneous δ34S, Δ33S, and Δ36S signatures that reflect assimilation of both magmatic sulfur and photolytic sulfate during hydrothermal seafloor alteration. Lastly, pyrite in a massive sulfide lens is isotopically similar to barite of several Paleoarchean deposits worldwide, which might indicate mass dependent sulfur processing from a global and well-mixed sulfate reservoir at this time.  相似文献   

11.
Central Fujian Rift is another new and important volcanogenic massive sulfide Pb-Zn polymetallic metallogenetic belt. In order to find out the material genesis and mineralization period of Meixian-type Pb-Zn-Ag deposits, S and Pb isotope analysis and isotope geochronology of ores and wall rocks for five major deposits are discussed. It is concluded that the composition of sulfur isotope from sulfide ore vary slightly in different deposits and the mean value is close to zero with the 834S ranging from -3.5‰ to ＋5.6‰ averaging at ＋2.0‰, which indicates that the sulfur might originate from magma or possibly erupted directly from volcano or was leached from ore-hosted volcanic rock. The lead from ores in most deposits displays radioactive genesis character （206pb/204pb〉18.140, 207Pb/204pb〉15.584, 208pb/204pb〉38.569） and lead isotope values of ores are higher than those of wall rocks, which indicates that the lead was likely leached from the ore-hosted volcanic rocks. Based on isotope data, two significant Pb-Zn metallogenesis are delineated, which are Mid- and Late-Proterozoic sedimentary exhalative metailogenesis （The single zircon U-Pb, Sm-Nd isochronal and Ar-Ar dating ages of ore- hosted wall rocks are calculated to be among 933-1788 Ma.） and Yanshanian magmatic hydrothermal superimposed and alternated metallogenesis （intrusive SHRIMP zircon U-Pb and Rb-Sr isochronal ages between 127-154 Ma）.  相似文献   

12.
The Snowdon caldera of North Wales is host to base metal sulfide-bearing veins and stockworks, mineralized breccias, disseminated sulfides, and localized zones of semi-massive to massive sulfide, with subordinate magnetite-rich veins. The late Ordovician host volcanic sequence accumulated in a shallow marine, back-arc environment in the Welsh Basin, which forms part of the Avalon Zone of the British and Irish Caledonides. New field evidence, sulfur isotopes, and U-Pb dating indicate that the Snowdon mineralization is genetically and temporally related to Late Ordovician magmatism and caldera formation. It is interpreted to represent volcanogenic pipe-style sulfide mineralization, resulting from focused hydrothermal fluids moving along caldera-related faults and simultaneous dispersal of fluids through the volcaniclastic pile. Sulfur isotope data suggest that, whilst a limited contribution of magmatic S cannot be ruled out, thermochemical reduction of contemporaneous Ordovician seawater sulfate was the dominant mechanism for sulfide production in the Snowdon system, resulting in a mean value of about 12‰ in both the host volcanic strata and the mineralized veins. Despite the tectonic setting being prospective for VMS deposits, strata-bound sulfide accumulations are absent in the caldera. This is attributed to the shallow water depths, which promoted boiling and the formation of sub-seafloor vein-type mineralization. Furthermore, the tectonic instability of the caldera and the high energy, shallow marine environment would have limited preservation of any seafloor deposits. The new U-Pb dates for the base (454.26 ± 0.35 Ma) and top (454.42 ± 0.45 Ma) of the host volcanic rocks, indicate that the Snowdon magmatic activity was short lived, which is likely to have limited the duration and areal extent of the ore-forming system. The absence of massive sulfide mineralization is consistent with the general paucity of economic VMS deposits in the Avalon Zone. Despite the highly prospective geological setting this study further illustrates the importance of volcanic facies mapping and associated paleo-environmental interpretations in VMS exploration.  相似文献   

13.
Sulfide sulfur in mid-oceanic ridge hydrothermal vents is derived from leaching of basaltic-sulfide and seawater-derived sulfate that is reduced during high temperature water rock interaction. Conventional sulfur isotope studies, however, are inconclusive about the mass-balance between the two sources because 34S/32S ratios of vent fluid H2S and chimney sulfide minerals may reflect not only the mixing ratio but also isotope exchange between sulfate and sulfide. Here, we show that high-precision analysis of S-33 can provide a unique constraint because isotope mixing and isotope exchange result in different Δ33S (≡δ33S-0.515 δ34S) values of up to 0.04‰ even if δ34S values are identical. Detection of such small Δ33S differences is technically feasible by using the SF6 dual-inlet mass-spectrometry protocol that has been improved to achieve a precision as good as 0.006‰ (2σ).Sulfide minerals (marcasite, pyrite, chalcopyrite, and sphalerite) and vent H2S collected from four active seafloor hydrothermal vent sites, East Pacific Rise (EPR) 9-10°N, 13°N, and 21°S and Mid-Atlantic Ridge (MAR) 37°N yield Δ33S values ranging from −0.002 to 0.033 and δ34S from −0.5‰ to 5.3‰. The combined δ34S and Δ33S systematics reveal that 73 to 89% of vent sulfides are derived from leaching from basaltic sulfide and only 11 to 27% from seawater-derived sulfate. Pyrite from EPR 13°N and marcasite from MAR 37°N are in isotope disequilibrium not only in δ34S but also in Δ33S with respect to associated sphalerite and chalcopyrite, suggesting non-equilibrium sulfur isotope exchange between seawater sulfate and sulfide during pyrite precipitation. Seafloor hydrothermal vent sulfides are characterized by low Δ33S values compared with biogenic sulfides, suggesting little or no contribution of sulfide from microbial sulfate reduction into hydrothermal sulfides at sediment-free mid-oceanic ridge systems. We conclude that 33S is an effective new tracer for interplay among seawater, oceanic crust and microbes in subseafloor hydrothermal sulfur cycles.  相似文献   

14.
The Jiapigou gold belt (>150 t Au), one of the most important gold-producing districts in China, is located at the northeastern margin of the North China Craton. It is composed of 17 gold deposits with an average grade around 10 g/t Au. The deposits are hosted in Archean gneiss and TTG rocks, and are all in shear zones or fractures of varying orientations and magnitudes. The δ34S values of sulfide from ores are mainly between 2.7?‰ and 10?‰. The Pb isotope characteristics of ore sulfides are different from those of the Archean metamorphic rocks and Mesozoic granites and dikes, and indicate that they have different lead sources. The sulfur and lead isotope compositions imply that the ore-forming materials might originate from multiple, mainly deep sources. Fluid inclusions in pyrite have 3He/4He ratios of 0.6 to 2.5 Ra, whereas their 40Ar/36Ar ratios range from 1,444 to 9,805, indicating a dominantly mantle fluid with a negligible crustal component. δ18O values calculated from hydrothermal quartz are between ?0.2?‰ and +5.9?‰, and δD values of the fluids in the fluid inclusions in quartz are from ?70?‰ to ?96?‰. These ranges suggest dominantly magmatic water with a minor meteoric component. The noble gas isotopic data, along with the stable isotopic data, suggest that the ore-forming fluids have a dominantly mantle source with minor crustal addition.  相似文献   

15.
Many metallic ore deposits of the Late Cretaceous to Early Tertiary periods are distributed in the Gyeongsang Basin. Previous and newly analyzed sulfur isotope data of 309 sulfide samples from 56 ore deposits were reviewed to discuss the genetic characteristics in relation to granitoid rocks. The metallogenic provinces of the Gyeongsang Basin are divided into the Au–Ag(–Cu–Pb–Zn) province in the western basin where the sedimentary rocks of the Shindong and Hayang groups are distributed, Pb–Zn(–Au–Ag–Cu), Cu–Pb–Zn(–Au–Ag), and Fe–W(–Mo) province in the central basin where the volcanic rocks of the Yucheon Group are dominant, and Cu(–Mo–W–Fe) province in the southeastern basin where both sedimentary rocks of the Hayang Group and Tertiary volcanic rocks are present. Average sulfur isotope compositions of the ore deposits show high tendencies ranging from 2.2 to 11.7‰ (average 5.4‰) in the Pb–Zn(–Au–Ag–Cu) province, ?0.7 to 11.5‰ (average 4.6‰) in the Cu–Pb–Zn(–Au–Ag) province, and 3.7 to 11.4‰ (average 7.5‰) in the Fe–W(–Mo) province in relation to magnetite‐series granitoids, whereas they are low in the Au–Ag(–Cu–Pb–Zn) province in relation to ilmenite‐series granitoids, ranging from ?2.9 to 5.7‰ (average 1.7‰). In the Cu(–Mo–W–Fe) province δ34S values are intermediate ranging from 0.3 to 7.7‰ (average 3.6‰) and locally high δ34S values are likely attributable to sulfur derived from the Tertiary volcanic rocks during hydrothermal alteration through faults commonly developed in this region. Magma originated by the partial melting of the 34S‐enriched oceanic plate intruded into the volcanic rocks and formed magnetite‐series granitoids in the central basin, which contributed to high δ34S values of the metallic deposits. Conversely, ilmenite‐series granitoids were formed by assimilation of sedimentary rocks rich in organic sulfur that influenced the low δ34S values of the deposits in the western and southeastern provinces.  相似文献   

16.
We present a 3-year study of concentrations and sulfur isotope values (δ34S, Δ33S, and Δ36S) of sulfur compounds in the water column of Fayetteville Green Lake (NY, USA), a stratified (meromictic) euxinic lake with moderately high sulfate concentrations (12-16 mM). We utilize our results along with numerical models (including transport within the lake) to identify and quantify the major biological and abiotic processes contributing to sulfur cycling in the system. The isotope values of sulfide and zero-valent sulfur across the redox-interface (chemocline) change seasonally in response to changes in sulfide oxidation processes. In the fall, sulfide oxidation occurs primarily via abiotic reaction with oxygen, as reflected by an increase in sulfide δ34S at the redox interface. Interestingly, S isotope values for zero-valent sulfur sampled at this time still reflect production and recycling by phototrophic S-oxidation. In the spring, sulfide S isotope values suggest an increased input from phototrophic oxidation, consistent with a more pronounced phototroph population at the chemocline. This trend is associated with smaller fractionations between sulfide and zero-valent sulfur, suggesting a metabolic rate control on fractionation similar to that for sulfate reduction. Comparison of our data with previous studies indicates that the S isotope values of sulfate and sulfide in the deep waters are remarkably stable over long periods of time, with consistently large fractionations of up to 58‰ in δ34S. Models of the δ34S and Δ33S trends in the deep waters (considering mass transport via diffusion and advection along with biological processes) require that these fractionations are a consequence of sulfur compound disproportionation at and below the redox interface in addition to large fractionations during sulfate reduction. The large fractionations during sulfate reduction appear to be a consequence of the high sulfate concentrations and the distribution of organic matter in the water column. The occurrence of disproportionation in the lake is supported by profiles of intermediate sulfur compounds and by lake microbiology, but is not evident from the δ34S trends alone. These results illustrate the utility of including minor S isotopes in sulfur isotope studies to unravel complex sulfur cycling in natural systems.  相似文献   

17.
δ 34S-values have been determined in 248 sulfide samples from different profiles through the ore bodies of the Sulitjelma pyrite-copper deposits. The values range for pyrite from ?4,1‰ to +9,2‰, but for an individual orebody the spread is generally much lower. Some profiles exhibit a systematic δ 34S decrease from the footwall to the hanging wall of the ore bodies, whereas laterally the S isotope composition in a distinct layer is rather uniform. Another trend from heavier to lighter sulfur exists from the center towards the margin of large porphyroblastic pyrite crystalls. Among the trace elements only the Co concentration in pyrite appears to be correlated with the δ-values. The sulfur-isotopic fractionation between coexisting sulfides is in agreement with the experience from other deposits, namely δ34Spyrite>δ34Spyrrhotite≈δ34Ssphalerite>δ34Schalcopyite  相似文献   

18.
Pb–Zn deposits are widespread and common in various parts of the Taurus Belt. Most of the deposits are of pyrometasomatic and hydrothermal origin. The Keban Pb–Zn deposits are located along the intrusive contact between the Paleozoic – Lower Triassic Keban Metamorphic Formation and the syenite porphyry of the Upper Cretaceous Keban igneous rocks. Various studies have already been carried out; using fluid inclusion studies on fluorite, calcite and quartz on the pyrite–chalcopyrite bearing Keban ore deposits. This study focuses on the interpretation of stable isotope compositions in connexion with fluid inclusion data. Sulphur isotope values (δ34S) of pyrite are within the range of ?0.59 to +0.17‰V-CDT (n = 10). Thus, the source of sulphur is considered to be magmatic, as evidenced by associated igneous rocks and δ34S values around zero“0”. Oxygen isotope values δ18O of quartz vary between +10.5 and +19.9‰(SMOW). However, δ18O and δ13C values of calcite related to re-crystallized limestone (Keban Metamorphic Formation) reach up to +27.3‰(SMOW) and +1.6‰(PDB), respectively. The δ34S, δ13C and δ18O values demonstrate that skarn-type Pb–Zn deposits formed within syeno-monzonitic rocks and calc-schist contacts could have developed at low temperatures, by mixing metamorphic and meteoric waters in the final stages of magmatism.  相似文献   

19.
The distribution of mineral deposits, characterised as barite deposits, hematite-rich auriferous deposits and auriferous tourmaline–sulfide deposits, displays a regional sulfate–hematite–sulfide zoning along the thrust-delineated limbs of the Mariana anticline, in the south-eastern part of the Quadrilátero Ferrífero of Minas Gerais, Brazil. Cross-cut relationships of barite veins and sulfide lodes indicate that sulfidation occurred in a late-tectonic context, which is here attributed to the collapse of the ～0.6-Ga Brasiliano thrust front. Reconnaissance S-isotopic data from barite and pyrite (Antônio Pereira barite deposit and its adjacent gold deposit, respectively), and arsenopyrite (Passagem de Mariana gold deposit), suggest a new interpretation for the hydrothermal fluid overprint in the Mariana anticline. The Antônio Pereira barite has Δ33S values that are near zero, constraining the sulfate source to rocks younger than 2.45 Ga. The barite-δ34S values are between +19.6 and +20.8?‰. The Passagem arsenopyrite and tourmaline have Co/Ni ratios that define a positive linear trend with the Antônio Pereira pyrite. The latter has homogenous δ34S values, between +8.8 and +8.9?‰, which are compatible with thermochemical reduction of aqueous sulfate with the S-isotopic composition of the Antônio Pereira barite.  相似文献   

20.
The discovery of 33S anomalies in Archean sedimentary rocks has established that the early Earth before ∼2.2 Ga (billion years ago) had a very different sulfur cycle than today. The origin of the anomalies and the nature of early sulfur cycle are, however, poorly known and debated. In this study, we analyzed the total sulfur and oxygen isotope compositions, the δ18O, Δ17O, δ34S, Δ33S, and Δ36S, for the >3.2 Ga Fig Tree barite deposits from the Barberton Greenstone Belt, South Africa. The goal is to address two questions: (1) was Archean barite sulfate a mixture of 33S-anomalous sulfate of photolysis origin and 33S-normal sulfate of other origins? (2) did the underlying photochemical reactions that generated the observed 33S anomalies for sulfide and sulfate also generate 17O anomalies for sulfate?We developed a new method in which pure barite sulfate is extracted for oxygen and sulfur isotope measurements from a mixture of barite sands, cherts, and other oxygen-bearing silicates. The isotope data reveal that (1) there is no distinct 17O anomaly for Fig Tree barite, with an average Δ17O value the same as that of the bulk Earth (−0.02 ± 0.07‰, N = 49); and (2) the average δ18O value is +10.6 ± 1.1‰, close to that of the modern seawater sulfate value (+9.3‰). Evidence from petrography and from the δ18O of barites and co-existing cherts suggest minimum overprinting of later metamorphism on the sulfate’s oxygen isotope composition. Assuming no other processes (e.g., biological) independently induced oxygen isotope exchange between sulfate and water, the lack of reasonable correlation between the δ18O and Δ33S or between the δ34S and Δ33S suggests two mutually exclusive scenarios: (1) An overwhelming majority of the sulfate in the Archean ocean was of photolysis origin, or (2) The early Archean sulfate was a mixture of 33S-normal sulfates and a small portion (<5%?) of 33S-anomalous sulfate of photolysis origin from the atmosphere. Scenario 1 requires that sulfate of photolysis origin must have had only small 33S or 36S anomalies and no 17O anomaly. Scenario 2 requires that the photolysis sulfate have had highly negative δ34S and Δ33S values, recommending future theoretical and experimental work to look into photochemical processes that generate sulfate in Quadrant I and sulfide in Quadrant III in a δ34S (X)-Δ33S (Y) Cartesian plane. A total sulfur and oxygen isotope analysis has provided constraints on the underlying chemical reactions that produced the observed sulfate isotope signature as well as the accompanying atmospheric, oceanic, and biological conditions.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号