首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Broad-band data from South American earthquakes recorded by Californian seismic networks are analysed using a newly developed seismic wave migration method—the slowness backazimuth weighted migration (SBWM). Using the SBWM, out-of-plane seismic P -wave reflections have been observed. The reflection locations extend throughout the Earth's lower mantle, down to the core–mantle boundary (CMB) and coincide with the edges of tomographically mapped high seismic velocities. Modelling using synthetic seismograms suggests that a narrow (10–15 km) low- or high-velocity lamella with about 2 per cent velocity contrast can reproduce the observed reflected waveforms, but other explanations may exist. Considering the reflection locations and synthetic modelling, the observed out-of-plane energy is well explained by underside reflections off a sharp reflector at the base of the subducted lithosphere. We also detect weaker reflections corresponding to the tomographically mapped top of the slab, which may arise from the boundary between the Nazca plate and the overlying former basaltic oceanic crust. The joint interpretation of the waveform modelling and geodynamic considerations indicate mass flux of the former oceanic lithosphere and basaltic crust across the 660 km discontinuity, linking processes and structure at the top and bottom of the Earth's mantle, supporting the idea of whole mantle convection.  相似文献   

2.
New multichannel seismic reflection data were collected over a 565 km transect covering the non-volcanic rifted margin of the central eastern Grand Banks and the Newfoundland Basin in the northwestern Atlantic. Three major crustal zones are interpreted from west to east over the seaward 350 km of the profile: (1) continental crust; (2) transitional basement and (3) oceanic crust. Continental crust thins over a wide zone (∼160 km) by forming a large rift basin (Carson Basin) and seaward fault block, together with a series of smaller fault blocks eastwards beneath the Salar and Newfoundland basins. Analysis of selected previous reflection profiles (Lithoprobe 85-4, 85-2 and Conrad NB-1) indicates that prominent landward-dipping reflections observed under the continental slope are a regional phenomenon. They define the landward edge of a deep serpentinized mantle layer, which underlies both extended continental crust and transitional basement. The 80-km-wide transitional basement is defined landwards by a basement high that may consist of serpentinized peridotite and seawards by a pair of basement highs of unknown crustal origin. Flat and unreflective transitional basement most likely is exhumed, serpentinized mantle, although our results do not exclude the possibility of anomalously thinned oceanic crust. A Moho reflection below interpreted oceanic crust is first observed landwards of magnetic anomaly M4, 230 km from the shelf break. Extrapolation of ages from chron M0 to the edge of interpreted oceanic crust suggests that the onset of seafloor spreading was ∼138 Ma (Valanginian) in the south (southern Newfoundland Basin) to ∼125 Ma (Barremian–Aptian boundary) in the north (Flemish Cap), comparable to those proposed for the conjugate margins.  相似文献   

3.
Summary. Multichannel seismic reflection sections recorded across Vancouver Island have revealed two extensive zones of deep seismic reflections that dip gently to the northeast, and a number of moderate northeasterly dipping reflections that can be traced to the surface where major faults are exposed. Based on an integrated interpretation of these data with information from gravity, heat flow, seismicity, seismic refraction, magnetotelluric and geological studies it is concluded that the lower zone of gently dipping reflections is due to underplated oceanic sediments and igneous rocks associated with the current subduction of the Juan de Fuca plate, and that the upper zone represents a similar sequence of accreted rocks associated with an earlier episode of subduction. The high density/high velocity material between the two reflection zones is either an underplated slab of oceanic lithosphere or an imbricated package of mafic rocks. Reprocessing of data from two of the seismic lines has produced a remarkable image of the terrane bounding Leech River fault, with its dip undulating from >60° near the surface to 20° at 3 km depth and ∼38° at 6 km depth.  相似文献   

4.
Summary. Conventional migration of deep seismic reflection data often produces disappointingly poor results even when the original unmigrated data are of high quality and are relatively noise free. Surprisingly, deep data often subjectively appear to be best migrated at velocities which are up to 50% less than appropriate interval velocities derived from crustal refraction experiments or directly from stacking velocities. The explanation for this behaviour is that near surface features distort and attenuate the seismic wave field and produce apparent discontinuities in deep reflections. Since these discontinuities are spurious they are not associated with the appropriate large diffractions which real discontinuities at depth would produce. During the process of migration reflections are invented in order to cancel out the missing diffractions thereby producing a "smiley" section which appears overmigrated. Since the lateral extent of individual smiles increases with increasing migration velocity, increasing two-way-time, and increasing seismic wavelength, the effect" is almost unnoticeable on conventional shallow seismic data but is overwhelming for deep crustal data.  相似文献   

5.
Summary. It is known that flow in the mantle can produce preferred orientation in olivine crystals with seismic anisotropy as a consequence. Flow in the subcrustal lithosphere is unlikely because of the high viscosity. Lenses of high temperature and low-viscosity ( anomalous mantle ) are located under the crust in many tectonically active regions, and viscous flow can easily arise in such material resulting in seismic anisotropy. After cooling, such anomalous mantle acquires high viscosity and becomes incorporated into the lithospheric layer preserving the anisotropy produced by the flows which existed previously. The interaction of the stresses with cracks in the upper crust can be one of the causes of anisotropy in this layer.  相似文献   

6.
The so-called S reflector is a group of bright, continuous reflections underlying the landward-tilted fault blocks of the west Galicia rifted margin, S has been interpreted as the brittle-ductile transition, the lop of an intrusion, a detachment fault, and the crust-mantle boundary. To constrain the internal structure of the reflector, we have carried out detailed analyses of these reflections. We compare the waveforms of the seafloor reflection and its first multiple, both to determine the amplitude of the seafloor reflection and to show (hat the seafloor is in effect a spike in the reflectivity series so that the seafloor reflection can be used as the far-field wavelet, including both source and receiver ghosts. We compare (he waveform of the seafloor and 5 and show that, within the resolution of our data, S is a reflection from a step increase in acoustic impedance. This result is confirmed through complex trace analysis, and in particular the determination of the apparent polarity of S, and the examination of the instantaneous frequency function: S is consistently positive polarity, and shows no significant frequency anomaly. Simple modelling shows that S is very unlikely to be a reflection from a thin layer. We thus conclude that S is probably a single steplike interface. From the varying frequency content of the data, we determine a value for the effective Q between S and the seafloor, and use this to assess the amplitude loss due to attenuation and scattering. We use a comparison between the seafloor and the S reflection to constrain the amplitude of S, and estimate a reflection coefficient for S of at least 0.2 in places, decreasing landwards. By analogy with structures developed in the highly extended regions of the western United States, we consider that the most likely interpretation of S is as a sharp west-dipping detachment fault separating a 'granitic' upper plate from a higher-velocity lower plate, locally probably serpentinized mantle.  相似文献   

7.
Summary. NORSAR recordings of Rayleigh waves generated by presumed nuclear explosions on central and southern Novaya Zemlya and in northwestern Siberia have been studied. Using a frequency time analysing technique and correcting for presumed known dispersion effects across the Baltic Shield, dispersion curves for two different paths across the southern part of the Barents Sea were obtained. The curves are very unusual in that they give extremely low velocities even for periods up to 20 s. For the path to the middle part of the island, the inversion of the data gives a model with sediments and consolidated sediments down to 25 km, followed by a 15-km thick basaltic layer and an upper mantle with a P velocity as low as 7.9 km/s. For the path to the southern part of Novaya Zemlya the data inversion gives a somewhat different model with sediments and consolidated sediments down to 8 km, followed by a 17-km thick zone with velocities close to granitic and a 15-km thick layer with basaltic velocities. Again the upper-mantle P velocity is only 7.9 km/s. Other indications of lateral inhomogeneities in the Barents Sea are obtained by utilizing the array's capability to determine the angle of approach of seismic waves. It is demonstrated that reflections both from inhomogeneities in the Barents Sea and the continental margin off Norway can be detected. For waves from the southern end of the island, a reflection from a strong discontinuity close to the direct path to the middle part of the island is found, whereas signals from this area include a reflected wave possibly coming from the edge of the Svalbard platform.  相似文献   

8.
Summary. Petrological arguments are advanced in favour of compositional in-homogeneity in the upper mantle which could, in part, explain the low velocity zone. It is suggested that an olivine-pyroxene-spinel layer at the Mohorovičié discontinuity passes downwards at depths of 70–100 km into a olivine-pyroxene-amphibole-?garnet-spinel layer. This lower layer is able to undergo partial fusion to yield basalt while that above it has yielded basalt in the past, but is now barren and can yield no more. Associated with the downwards change in composition is a reduction in the temperature of the beginning of mantle melting, which makes a "step" in the mantle melting curve. This "step" brings the fusion curve close to the geothermal gradient and there is a consequent reduction in seismic velocity. This effect is accentuated by the fact that the downwards transition is to a layer which in any case might be expected to have lower seismic velocities through the presence of amphibole and garnet.  相似文献   

9.
A series of three‐dimensional models has been constructed for the structure of the crust and upper mantle over a large region spanning the NE Atlantic passive margin. These incorporate isostatic and flexural principles, together with gravity modelling and integration with seismic interpretations. An initial isostatic model was based on known bathymetric/topographic variations, an estimate of the thickness and density of the sedimentary cover, and upper mantle densities based on thermal modelling. The thickness of the crystalline crust in this model was adjusted to equalise the load at a compensation depth lying below the zone of lateral mantle density variations. Flexural backstripping was used to derive alternative models which tested the effect of varying the strength of the lithosphere during sediment loading. The models were analysed by comparing calculated and observed gravity fields and by calibrating the predicted geometries against independent (primarily seismic) evidence. Further models were generated in which the thickness of the sedimentary layer and the crystalline crust were modified in order to improve the fit to observed gravity anomalies. The potential effects of igneous underplating and variable upper mantle depletion were explored by a series of sensitivity trials. The results provide a new regional lithospheric framework for the margin and a means of setting more detailed, local investigations in their regional context. The flexural modelling suggests lateral variations in the strength of the lithosphere, with much of the margin being relatively weak but areas such as the Porcupine Basin and parts of the Rockall Basin having greater strength. Observed differences between the model Moho and seismic Moho along the continental margin can be interpreted in terms of underplating. A Moho discrepancy to the northwest of Scotland is ascribed to uplift caused by a region of upper mantle with anomalously low density, which may be associated with depletion or with a temperature anomaly.  相似文献   

10.
Summary. A 12 s two-way time seismic reflection profile, 46 km in length and straddling the Cape Seal Arch, was surveyed on the Agulhas Bank during 1985. The contact between the marine sediments and the pre-Mesozoic basement produces a strong reflection at 2 s. The folded Cape and Kaaimans sediments give rise to occasional strong reflections from 2-6 s. Strongly reflecting segments occur between 9 and 10 s, and with a time-to-depth conversion made using refraction velocities, this zone of occasional strong reflections is identified as the Moho. The section from 6–9 s does not give rise to significant coherent reflections, and is considered to represent the Archaean crust. An analysis of the faults active during Gondwana break-up, revealed by reflection seismology, show the Agulhas Fracture Zone to be a divergent wrench fault system.  相似文献   

11.
Summary. The rather abrupt changes in velocity gradient which have sometimes been proposed, notably in the upper mantle and near the base of the mantle, have an effect equivalent to that of one or more second-order discontinuities, where partial reflection occurs due to a change in curvature of the wavefront across these discontinuities. The effect is ignored in the classical WKBJ approximation to the wave functions, but it can be explicitly demonstrated by applying the extended WKBJ method (Langer's approximation) to a piecewise smooth layered model. For the purpose of this study it is convenient to represent the response of such a modelby a generalized reflection coefficient. For a model of one or a system of several second-order discontinuities (approximating a change in velocity gradient over a finite depth interval), the reflection coefficient can be perhaps surprisingly large for long-period waves near their turning point. It is shown that this effect can significantly alter the amplitude decay of SH waves diffracted around the core, in models where a change in velocity gradient near the core—mantle boundary constitutes a low-velocity zone at the base of the mantle; such models have recently been proposed. With the same velocity gradients, the effect on P diffraction is less important. The results for SH diffraction in these models support the conclusion that a small amplitude decay must be explained by a velocity decrease with depth, i.e. a low-velocity zone at the base of the mantle.  相似文献   

12.
Finite deformation during fluid flow   总被引：6，自引：0，他引：6  
Summary. Typical upper mantle circulations obtained by solving Stokes' equation produce finite deformations which differ in important ways from those produced by pure or simple shear. Finite strain, defined by the ratio of the long to the short axis of the deformation ellipse, in most cases shows a steady increase with superimposed oscillations. Similarity solutions for the flow near plate boundaries demonstrate that the observed seismic anisotropy in the oceanic lithosphere can be produced by the finite deformation beneath the ridge axes. The same mechanism should give rise to strong anisotropy in the mantle above sinking slabs. Such anisotropy has not yet been detected, perhaps because the observed high velocities have been attributed to thermal effects. Convection in the mantle remote from plate boundaries produces complicated deformation which varies rapidly with position and will therefore be difficult to map seismically. The fabrics of nodules in lavas and kimberlites suggest that large strains can occur in the mantle under stresses which are too small to produce dislocation movement. The large and complicated finite deformation produced by the convective circulation in the mantle also affects closed geochemical systems, and leads to thorough mixing of any convecting region.  相似文献   

13.
Summary. The upper boundary of the descending oceanic plate is located by using PS -waves (converted from P to S at the boundary) in the Tohoku District, the north-eastern part of Honshu, Japan. the observed PS-P time data are well explained by a two-layered oceanic plate model composed of a thin low-velocity upper layer whose thickness is less than 10 km and a thick high-velocity lower layer; the upper and lower layers respectively have 6 per cent lower and 6 per cent higher velocity than the overriding mantle. the estimated location of the upper boundary is just above the upper seismic plane of the double-planed deep seismic zone. This result indicates that events in the upper seismic plane, at least in the depth range from 60 to 150 km, occur within the thin low-velocity layer on the surface of the oceanic plate.  相似文献   

14.
Summary. Seismic anisotropy within the upper mantle originates from the preferred orientation of highly anisotropic single crystals. The symmetry and magnitude of anisotropy depend upon: (1) the volume percentages of the minerals constituting the upper mantle, (2) the degree and symmetry of preferred orientation of each mineral and (3) the alignment of the minerals' crystallographic axes relative to one another. The nature of upper mantle anisotropy can be examined by studying mineral orientations within ultramafic rocks which were once part of the mantle. Petrofabric data for olivine and pyroxene have been used to obtain velocity anisotropy patterns over large regions of ultramafic rocks from the Samail ophiolite, Oman, the Troodos ophiolite, Cyprus, the Bay of Islands ophiolife, Newfoundland, the Twin Sisters ultramafic, Washington, USA, the Dun Mountain ophiolite, New Zealand, the Red Hills ophiolite, New Zealand and the Red Mountain ophiolite, New Zealand. The compressional wave anisotropy calculated for these massifs ranges from 3 to 8 per cent, in excellent agreement with observed seismic anisotropy in the upper continental and oceanic mantle. The symmetry varies from orthorhombic to axial, with the axial symmetry axis corresponding to the olivine a-axes maxima and subparallel to spreading directions in oceanic upper mantle. Pyroxene a -, b - and c -axes maxima generally parallel olivine b -, c - and a -axes, respectively, and anisotropy decreases with increasing pyroxene content. Shear-wave splitting is predicted for all propagation directions within the upper mantle. Symmetry is also orthorhombic or axial, with the minimum difference in velocity between the two shear-waves parallel to the maximum compressional wave velocity.  相似文献   

15.
Deep seismic reflection studies in Israel - an update   总被引：1，自引：0，他引：1  
Summary. The results of three deep crustal reflection lines are presently available from Israel. A 90 km line from near the Dead Sea rift to the Mediterranean coast was carried out for deep study. Two other lines in the Mediterranean coastal area were derived by recorrelation of oil exploration lines. The data shows a division between continental inner Israel and the coastal plain. In the first area a reflective lower crust is apparent with transparent upper crust and almost transparent upper mantle. Near the coast, in an area which was previously suggested as underlain by an ancient fossil oceanic crust, strong reflections characterize the uppermost mantle. Comparison between the reflection pattern and previous deep refraction and MT data indicates some agreement away from the coast and lack of correlation in the area of possible fossil oceanic crust near the coast.  相似文献   

16.
Summary. Fold belts form due to shortening of deep basins on oceaic and continental crust. Basins on the oceanic crust should be characterized by a pronounced seismic anisotropy in the mantle lithosphere. Deep basins on the continental crust may develop from the stretching or the destruction of the lower crust under asthenospheric upwelling. These processes can produce seismic anisotropy in both the crust and mantle lithosphere. The character of the anisotropy is different for different basin forming processes. Considerable anisotropy should also arise from compression of the crust and mantle in fold belts. The formation of fold belts produces the original seismic anisotropy in continental lithosphere.  相似文献   

17.
We present a new technique for the efficient measurement of the traveltimes of long period body wave phases. The technique is based on the fact that all arrivals of a particular seismic phase are remarkably similar in shape for a single event. This allows the application of cross-correlation techniques that are usually used in a regional context to measure precise global differential times. The analysis is enhanced by the inclusion of a clustering algorithm that automatically clusters waveforms by their degree of similarity. This allows the algorithm to discriminate against unusual or distorted waveforms and makes for an extremely efficient measurement technique.
This technique can be applied to any seismic phase that is observed over a reasonably large distance range. Here, we present the results of applying the algorithm to the long-period channels of all data archived at the IRIS DMC from 1976 to 2005 for the seismic phases S and P (from 23° to 100°) and SS and PP (from 50° to 170°). The resulting large data sets are inverted along with existing surface wave and updated differential traveltime measurements for new mantle models of S and P velocity. The resolution of the new model is enhanced, particularly, in the mid-mantle where SS and PP turn. We find that slow anomalies in the central Pacific and Africa extend from the core–mantle boundary to the upper mantle, but their direct connection to surface hotspots is beyond our resolution. Furthermore, we find that fast anomalies that are likely associated with subducting slabs disappear between 1700 and 2500 km, and thus are not continuous features from the upper to lower mantle despite our extensive coverage and high resolution of the mid-mantle.  相似文献   

18.
Summary. In 1985, near-vertical incidence reflection profiling was carried out across the Arunta Block in Central Australia. This region consists of exposed Proterozoic metasediments, granites and granulites. There is usually a limited sedimentary coverage generated by deep weathering. The seismic sections for the deep crust are markedly different from those previously recorded in Eastern Australia where there is extensive sedimentary cover. One of the striking features is the presence of energy with frequencies as high as 100 Hz at two-way times of 5-6 s. Reflections are found throughout the crust, and there is no zone that can be characterised as non-reflective. The strongest reflectors commonly lie in the intervals around 4-6 s and 8–11 s and display significant dip. Individual shot records show fairly rapid variations in amplitude and waveform within a reflection band and the correlation between records from adjacent shots can also be somewhat limited. Such features are not well suited to the application of standard processing techniques designed for subhorizontal structures, and call into question the utility of conventional stacking. The character of the reflections changes markedly with varying frequency which suggests that they arise by interference phenomena, probably associated with laterally varying lamellar structures.  相似文献   

19.
《Basin Research》2018,30(Z1):437-451
Many prospective sedimentary basins contain a variety of extrusive volcanic products that are ultimately sourced from volcanoes. However, seismic reflection‐based studies of magmatic rift basins have tended to focus on the underlying magma plumbing system, meaning that the seismic characteristics of volcanoes are not well understood. Additionally, volcanoes have similar morphologies to hydrothermal vents, which are also linked to underlying magmatic intrusions. In this study, we use high resolution 3D seismic and well data from the Bass Basin, offshore southern Australia, to document 34 cone‐ and crater‐type vents of Miocene age. The vents overlie magmatic intrusions and have seismic properties indicative of a volcanic origin: their moderate–high amplitude upper reflections and zones of “wash‐out” and velocity pull‐up beneath. The internal reflections of the vents are similar to those found in lava deltas, suggesting they are composed of volcaniclastic material. This interpretation is corroborated by data from exploration wells which penetrated the flanks of several vents. We infer that the vents we describe are composed of hyaloclastite and pyroclasts produced during submarine volcanic eruptions. The morphology of the vents is typical of monogenetic volcanoes, consistent with the onshore record of volcanism on the southern Australian margin. Based on temporal, spatial and volumetric relationships, we propose that submarine volcanoes can evolve from maars to tuff cones as a result of varying magma‐water interaction efficiency. The morphologies of the volcanoes and their links to the underlying feeder systems are superficially similar to hydrothermal vents. This highlights the need for careful seismic interpretation and characterization of vent structures linked to magmatic intrusions within sedimentary basins.  相似文献   

20.
A general one-way representation of seismic data can be obtained by substituting a Green's one-way wavefield matrix into a reciprocity theorem of the convolution type for one-way wavefields. From this general one-way representation, several special cases can be derived.
By introducing a Green's one-way wavefield matrix for primaries , a generalized Bremmer series representation is obtained. Terminating this series after the first-order term yields a primary representation of seismic reflection data. According to this representation, primary seismic reflection data are proportional to a reflection operator, 'modified' by primary propagators for downgoing and upgoing waves. For seismic imaging, these propagators need to be inverted. Stable inverse primary propagators can easily be obtained from a one-way reciprocity theorem of the correlation type.
By introducing a Green's one-way wavefield matrix for generalized primaries , an alternative representation is obtained in which multiple scattering is organized quite differently (in comparison with the generalized Bremmer series representation). According to the generalized primary representation, full seismic reflection data are proportional to a reflection operator, 'modified' by generalized primary propagators for downgoing and upgoing waves. Internal multiple scattering is fully included in the generalized primary propagators {either via a series expansion or in a parametrized way). Stable inverse generalized primary propagators can be obtained from the one-way reciprocity theorem of the correlation type. These inverse propagators are the nucleus for seismic imaging techniques that take the angle-dependent dispersion effects due to fine-layering into account.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号