共查询到20条相似文献，搜索用时 343 毫秒
1.
An earthquake of M
S=7.4 occurred in Mani, Xizang (Tibet), China on November 8, 1997. The moment tensor of this earthquake was inverted using
the long period body waveform data from China Digital Seismograph Network (CDSN). The apparent source time functions (ASTFs)
were retrieved from P and S waves, respectively, using the deconvolution technique in frequency domain, and the tempo-spatial
rupture process on the fault plane was imaged by inverting the azimuth dependent ASTFs from different stations. The result
of the moment tensor inversion indicates that the P and T axes of earthquake-generating stress field were nearly horizontal, with the P axis in the NNE direction (29°), the T axis in the SEE direction (122°) and that the NEE-SWW striking nodal plane and NNW-SSE striking nodal plane are mainly left-lateral
and right-lateral strike-slip, respectively; that this earthquake had a scalar seismic moment of 3.4×1020 N·m, and a moment magnitude of M
W=7.6. Taking the aftershock distribution into account, we proposed that the earthquake rupture occurred in the fault plane
with the strike of 250°, the dip of 88° and the rake of 19°. On the basis of the result of the moment tensor inversion, the
theoretical seismograms were synthesized, and then the ASTFs were retrieved by deconvoving the synthetic seismograms from
the observed seismograms. The ASTFs retrieved from the P and S waves of different stations identically suggested that this
earthquake was of a simple time history, whose ASTF can be approximated with a sine function with the half period of about
10 s. Inverting the azimuth dependent ASTFs from P and S waveforms led to the image showing the tempo-spatial distribution
of the rupture on the fault plane. From the "remembering" snap-shots, the rupture initiated at the western end of the fault,
and then propagated eastward and downward, indicating an overall unilateral rupture. However, the slip distribution is non-uniform,
being made up of three sub-areas, one in the western end, about 10 km deep ("western area"); another about 55 km away from
the western end and about 35 km deep ("eastern area"); the third about 30 km away from the western end and around 40 km deep
("central area"). The total rupture area was around 70 km long and 60 km wide. From the "forgetting" snap-shots, the rupturing
appeared quite complex, with the slip occurring in different position at different time, and the earthquake being of the characteristics
of "healing pulse". Another point we have to stress is that the locations in which the rupture initiated and terminated were
not where the main rupture took place. Eventually, the static slip distribution was calculated, and the largest slip values
of the three sub-areas were 956 cm, 743 cm and 1 060 cm, for the western, eastern and central areas, respectively. From the
slip distribution, the rupture mainly distributed in the fault about 70 km eastern to the epicenter; from the aftershock distribution,
however, the aftershocks were very sparse in the west to the epicenter while densely clustered in the east to the epicenter.
It indicated that the Mani M
S=7.9 earthquake was resulted from the nearly eastward extension of the NEE-SWW to nearly E-W striking fault in the northwestern
Tibetan plateau.
Contribution No. 99FE2016, Institute of Geophysics, China Seismological Bureau.
This work is supported by SSTCC Climb Project 95-S-05 and NSFDYS 49725410. 相似文献
2.
IntroductionOn September 27, 2003, an earthquake of MS=7.9 struck the border area of China, Russia and Mongolia. According to the field investigation from the Earthquake Administration of XinjiangAutonomous Region, the whole northern Tianshan region felt the hit. Buildings and structures within six counties and one city in Altay region, which is total about 0.11×106 km2 area, were damaged to different extent and caused certain economic losses. The epicenter determined by China National … 相似文献
3.
利用IRIS全球地震台网30°—90°的长周期P波记录, 反演了2008年3月21日新疆于田MS7.3地震的破裂过程, 得到了此次地震的破裂时空图像, 并初步分析了余震分布与主震断层滑动量分布的关系. 结果表明, 此次地震是一个破裂尺度长100 km、 宽20 km的破裂过程; 破裂持续时间约为40 s, 在第13 s时地震矩释放速率达到峰值, 断层面上一次大的破裂行为几乎构成了整个地震的破裂过程. 地震所释放的标量地震矩为4.23×1019 N·m, 其矩震级为MW7.02. 由主震断层静态滑动量分布图可以看出, 整个破裂区以正断左旋走滑为主, 显示出双侧破裂特征, 最大滑动量为151 cm, 位于初始破裂点沿断层出露地表处. 精定位后的余震在断层面上的投影结果显示, 80%以上ML4.0—4.9余震和全部ML≥5.0余震均发生在初始破裂点附近区域及其南西方向, 位于主震破裂滑动位移量迅速减小的区域, 反映了震源区介质强度的不均匀性. 相似文献
4.
2008年10月6日16时30分(北京时间),西藏自治区拉萨市当雄县发生Ms6.6级地震.震中位于亚东-谷露近南北向裂谷带北段,是该活动构造带近年来发生的一次较大地震.我们利用中国地震台网中心(CENC)和美国地震学联合研究所(IRIS)提供的宽频带地震记录资料,基于点源和有限断层模型,通过波形拟合反演了该地震的震源过程.结果表明,本次地震的发震断层面走向为183.3°,倾角为49.5°,滑动角约为－115°,最大滑动量达130 cm,地震震源的深度为9.6 km,地震的标量地震矩为2.85×1018 N·m,破裂持续时间约10 s.根据地震破裂的几何学和运动学特征,推测该地震主要发生在亚东-谷露南北向裂谷活动构造带内的一个高角度西倾断层上,是一个以拉张为主且有一定的右旋分量的破裂事件,这与青藏高原现今GPS测量所揭示的该地区地壳运动特征基本一致,暗示了青藏高原南部从西向东地表运动从北北东向到南东东向的运动学转变所导致的地壳在近东西方向上的拉张变形特征. 相似文献
5.
We conducted moment tensor inversion and studied source rupture process for M
S=7.9 earthquake occurred in the border area of China, Russia and Mongolia on September 27 2003, by using digital teleseismic
P-wave seismograms recorded by long-period seismograph stations of the global seismic network. Considering the aftershock
distribution and the tectonic settings around the epicentral area, we propose that the M
S=7.9 earthquake occurred on a fault plane with the strike of 127°, the dip of 79° and the rake of 171°. The rupture process
inversion result of M
S=7.9 earthquake shows that the total rupture duration is about 37 s, the scalar moment tensor is M
0=0.97×1020 N·m. Rupture mainly occurred on the shallow area with 110 km long and 30 km wide, the location in which the rupture initiated
is not where the main rupture took place, and the area with slip greater than 0.5 m basically lies within 35 km deep middle-crust
under the earth surface. The maximum static slip is 3.6 m. There are two distinct areas with slip larger than 2.0 m. We noticed
that when the rupture propagated towards northwest and closed to the area around the M
S=7.3 hypocenter, the slip decreased rapidly, which may indicate that the rupture process was stopped by barriers. The consistence
of spatial distribution of slip on the fault plane with the distribution of aftershocks also supports that the rupture is
a heterogeneous process owing to the presence of barriers. 相似文献
6.
2017年8月8日四川省九寨沟县发生了7.0级地震,中国大陆构造环境网络与北斗地基增强系统的GNSS连续观测共同监测到了此次地震的同震位移（坐标：东向为正,北向为正）,结果显示：3个站点记录到了明显的同震位移,距离震中43 km的九寨沟台站（SCJZ）在东西向的位移为-9.8±1.5 mm,在南北向的位移为3.3±0.7 mm;距离震中65 km的松潘站（SCSP）在东西向的位移为-1.8±0.7 mm,在南北向的位移为-7.7±0.6 mm;距离震中77 km的舟曲站（GSZQ）在东西向的位移为0.4±1.2 mm,在南北向的位移为3.6±0.8 mm.通过同震位移分布特征,可以推测此次地震为一次左旋走滑型事件,引起水平向同震位移大致不超过150 km范围,地震对东南侧的龙门山断裂带影响非常小,对北侧的塔藏断裂和西侧的岷江断裂处引起的同震位移为厘米级.同震位移的反演结果显示：断层面上滑动量主要集中在7 km深度,最大量值约为0.4 m,平均滑动角为-15°,利用滑动分布计算的相应矩震级为MW6.4,与地震波反演结果相当.结合同震滑动分布、同震主应变分布、余震分布和震源机制解等特征,推测此次地震破裂极值区累积的能量得到较充分释放,进一步分析得出此次地震在塔藏断裂、岷江断裂和虎牙断裂处产生了一定的应力变化,值得持续关注. 相似文献
7.
Xuejun Qiao Shaomin Yang Ruilin Du Linlin Ge Qi Wang 《Pure and Applied Geophysics》2011,168(10):1749-1758
Coseismic deformation fields of the 6 October 2008 M w6.3 Damxung earthquake were obtained from interferometric synthetic aperture radar by using three descending and two ascending Envisat images. Significant coseismic surface deformation occurred within 20?km?×?20?km of the epicenter with a maximum displacement of ~0.3?m along the satellite line of sight. We model a linear elastic dislocation in a homogeneous half space and use a nonlinear constraint optimized algorithm to estimate the fault location, geometry and slip distribution. The results indicate a moment magnitude M w6.3, and the earthquake is dominated by oblique normal and right-lateral slip with a maximum slip of 2.86?m at depth of 8?km. The rupture plane is about 15?km?×?14?km with strike S190°W and dip 55° to NW, located at a secondary fault of the Southeastern Piedmont of the Nyainqentanglha Mountains. Slip on normal faults in the Tibetan Plateau contributes to the rift evolution. 相似文献
8.
2010年9月4日新西兰南岛Canterbury平原发生了Mw7.1地震,震源深度约为10 km.本次地震发生在一条震前不为人所知的断层上.我们利用覆盖整个震区的合成孔径雷达(SAR)观测资料,通过干涉处理分析获得雷达视线向(LOS)同震形变场;以此资料为约束反演了断层的几何参数以及同震破裂分布.结果显示,该地震造成四条相对独立断层的破裂.大部分的地震矩释放发生在Greendale断层(编号1-4),其错动以右旋走滑为主,最大破裂约为8.5 m.其它三条断层中,经过震源的逆冲断层最大破裂为5.1 m (编号6),位于Greendale断层以西的逆冲断层最大破裂为3.5 m (编号5),位于Greendale断层北面的走滑断层最大破裂为1.9 m(编号7).反演的Greendale断层地表滑动与地质调查得到的地表破裂在形态和数值上均吻合较好.本次地震释放的地震矩为5.0×1019N·m,矩震级为7.1.板块边界带形变场分析表明,Darfield地震的发生受边界带应变分配在该地区残留构造应力场控制,其复杂性体现了区域构造应力场的特点.地震对其周围地区的应力场影响较大,库仑应力增加区与余震分布有一定对应关系,并在2011年Christchurch 6.3级地震发震断层区域造成约0.1bar的库仑应力增加,对此地震有一定的触发作用. 相似文献
9.
Based on digital teleseismic P-wave seismograms recorded by 28 long-period seismograph stations of the global seismic network, source process of the November 14, 2001 western Kunlun Mountain M S=8.1 (M W=7.8) earthquake is estimated by a new inversion method. The result shows that the earthquake is a very complex rupture event. The source rupture initiated at the hypocenter (35.95°N, 90.54°E, focal depth 10 km, by USGS NEIC), and propagated to the west at first. Then, in several minutes to a hundred minutes and over a large spatial range, several rupture growth points emerged in succession at the eastern end and in the central part of the finite fault. And then the source rupture propagated from these rupture growth points successively and, finally, stopped in the area within 50 km to the east of the centroid position (35.80°N, 92.91°E, focal depth 15 km, by Harvard CMT). The entire rupture lasted for 142 s, and the source process could be roughly separated into three stages: The first stage started at the 0 s and ended at the 52 s, lasting for 52 s and releasing approximately 24.4% of the total moment; The second stage started at the 55 s and ended at the 113 s, lasting for 58 s and releasing approximately 56.5% of the total moment; The third stage started at the 122 s and ended at the 142 s, lasting for 20 s and releasing approximately 19.1% of the total moment. The length of the ruptured fault plane is about 490 km. The maximum width of the ruptured fault plane is about 45 km. The rupture mainly occurred within 30 km in depth under the surface of the Earth. The average static slip in the underground rocky crust is about 1.2 m with the maximum static slip 3.6 m. The average static stress drop is about 5 MPa with the maximum static stress drop 18 MPa. The maximum static slip and the maximum stress drop occurred in an area within 50 km to the east of the centroid position. 相似文献
10.
Introduction An earthquake of MS=7.8 occurred near the Gujarat of India on January 26, 2001, which was one of the most deadly earthquakes since there was the record in the Indian history (Bendick, et al, 2001; Gupta, et al, 2001). The USGS of USA determined the origin time of the earthquake to be 3h16min41s (UTC), and the epicenter location to be 70.32篍, 23.40篘. Shortly after the earthquake, the moment tensor solutions or focal mechanisms and other related parameters were offered by s… 相似文献
11.
北京时间2013年1月29日,哈萨克斯坦发生MS6.1地震,为了提高对地震震源机制解的认识,并进一步了解震源区的应力场特征,利用CAP方法反演了此次地震序列震源机制解.反演结果表明,MS6.1地震节面Ⅰ的参数：走向241°,倾角80°,滑动角7°;节面Ⅱ的参数：走向150°,倾角84°,滑动角170°;P轴方位为196°,倾角2°,T轴方位为105°,倾角12°;矩震级MW为6.1;矩心深度为13km;震源类型是左旋走滑型.此次地震序列破裂优势方向为NEE—SWW,倾角以30°～60°居多,滑动角以60°～120°、-60°～-120°居多;P轴方位的优势取向为近NE—SW向,接近水平的居优;T轴优势取向为近SEE—NWW向,接近垂直的居优;震源机制类型以倾向滑动型为主.反演结果与断层的分布、余震分布及哈萨克斯坦中天山（伊犁盆地西部）NEE—SWW向应力场有很好的一致性. 相似文献
12.
Boi-Yee Liao Tian-Wei Sheu Yeong-Tien Yeh Huey-Chu Huang Lien-Shiang Yang 《Pure and Applied Geophysics》2013,170(3):391-407
This study investigates the kinematics of the rupture process of the M L 7.3 Chi–Chi, Taiwan, earthquake on September 21, 1999. By applying the proposed hybrid homomorphic deconvolution method to deconvolve teleseismic broadband P-wave displacement recordings of the earthquake, this study derives the apparent source time functions (ASTFs) at ten stations located around the epicenter. To further characterize the fault, the kinematic history of the rupture was inverted from ASTFs using a genetic algorithm, coupled with nonlinear iterative technique. The calculated ASFTs reveal that the total rupture event lasted for approximately 27 s. Static slip distribution images indicate that most slip occurred at shallower portions of the fault plane, especially 20–55 km north of the epicenter. The maximum slip reached 20 m at 45 km north of the epicenter, and the average slip throughout the observed rupture area was approximately 2 m. Large asperities on the fault appeared at 25–35 km and 40–50 km north of the hypocenter, and coincided with relatively high rupture velocity. This suggests that the earthquake’s energy may have been released quickly. The rupture velocity decreased upon encountering an asperity, and increased again after passing the asperity. This implies that the rupture required more time to overcome the resistances of the asperities. The maximum rupture velocity was 3.8 km/s, while the average rupture velocity was approximately 2.2 km/s. The rise time distribution suggests that larger slip amplitudes generally correspond to shorter rise times on the subfaults. 相似文献
13.
We conducted moment tensor inversion and studied source rupture process for M S=7.9 earthquake occurred in the border area of China, Russia and Mongolia on September 27 2003, by using digital teleseismic P-wave seismograms recorded by long-period seismograph stations of the global seismic network. Considering the aftershock distribution and the tectonic settings around the epicentral area, we propose that the M S=7.9 earthquake occurred on a fault plane with the strike of 127°, the dip of 79° and the rake of 171°. The rupture process inversion result of M S=7.9 earthquake shows that the total rupture duration is about 37 s, the scalar moment tensor is M 0=0.97×1020 N·m. Rupture mainly occurred on the shallow area with 110 km long and 30 km wide, the location in which the rupture initiated is not where the main rupture took place, and the area with slip greater than 0.5 m basically lies within 35 km deep middle-crust under the earth surface. The maximum static slip is 3.6 m. There are two distinct areas with slip larger than 2.0 m. We noticed that when the rupture propagated towards northwest and closed to the area around the M S=7.3 hypocenter, the slip decreased rapidly, which may indicate that the rupture process was stopped by barriers. The consistence of spatial distribution of slip on the fault plane with the distribution of aftershocks also supports that the rupture is a heterogeneous process owing to the presence of barriers. 相似文献
14.
采用DInSAR技术和欧空局2014年新发射的Sentinel-1A/IW数据,获取了2015年4月25日尼泊尔M_W7.8地震的InSAR同震形变场.所用InSAR数据扫描范围东西长约500 km,南北宽约250 km,覆盖了整个变形区域,揭示了形变场的全貌及其空间连续变化形态.此次地震造成的地表形变场总体呈现为中部宽两端窄的纺锤形,从震中向东偏南约20°方向延伸,主要形变区东西长约160 km,南北宽约110 km,由规模较大的南部隆升区和规模较小的北部沉降区组成,南部最大LOS向隆升量达1.1 m,北部最大LOS向沉降量约在0.55 m.在隆升和沉降区之间干涉纹图连续变化,没有出现由于形变梯度过大或地表破裂而导致的失相干现象,表明地震断层未破裂到地表.基于InSAR形变场和部分GPS观测数据,利用弹性半空间低倾角单一断层面模型进行了滑动分布单独反演和联合反演,三种反演结果均显示出一个明显的位于主震震中以东的滑动分布集中区,向外围衰减很快,主要滑动发生于地下7~23 km的深度范围内.InSAR单独反演的破裂范围,特别是东西向破裂长度大于GPS单独反演的破裂长度,而InSAR单独反演的最大滑动量则低于GPS单独反演的滑动量.因此认为联合反演结果更为可靠.联合反演的破裂面长约150 km,沿断层倾向宽约70 km,最大滑移量达到4.39 m,矩震级为M_W7.84,与之前用地震波数据和GPS数据反演的结果一致. 相似文献
15.
We have determined the rupture history of the March 28, 1964, Prince Williams Sound earthquake (M
w=9.2) from long-period WWSSNP-wave seismograms. Source time functions determined from the long-periodP waves indicate two major pulses of moment release. The first and largest moment pulse has a duration of approximately 100 seconds with a relatively smooth onset which reaches a peak moment release rate at about 75 seconds into the rupture. The second smaller pulse of moment release starts at approximately 160 seconds after the origin time and has a duration of roughly 40 seconds. Because of the large size of this event and thus a deficiency of on-scale, digitizableP-wave seismograms, it is impossible to uniquely invert for the location of moment release. However, if we assume a rupture direction based on the aftershock distribution and the results of surface wave directivity studies we are able to locate the spatial distribution of moment along the length of the fault. The first moment pulse most likely initiated near the epicenter at the northeastern down-dip edge of the aftershock area and then spread over the fault surface in a semi-circular fashion until the full width of the fault was activated. The rupture then extended toward the southwest approximately 300 km (Ruff andKanamori, 1983). The second moment pulse was located in the vicinity of Kodiak Island, starting at 500 km southwest of the epicenter and extending to about 600 km. Although the aftershock area extends southwest past the second moment pulse by at least 100 km, the moment release remained low. We interpret the 1964 Prince William Sound earthquake as a multiple asperity rupture with a very large dominant asperity in the epicentral region and a second major, but smaller, asperity in the Kodiak Island region.The zone that ruptured in the 1964 earthquake is segmented into two regions corresponding to the two regions of concentrated moment release. Historical earthquake data suggest that these segments behaved independently during previous events. The Kodiak Island region appears to rupture more frequently with previous events occurring in 1900, 1854, 1844, and 1792. In contrast, the Prince William Sound region has much longer recurrence intervals on the order of 400–1000 years. 相似文献
16.
Based on digital teleseismic P-wave seismograms recorded by 28 long-period seismograph stations of the global seismic network,
source process of the November 14, 2001 western Kunlun Mountain M
S=8.1 (M
W=7.8) earthquake is estimated by a new inversion method. The result shows that the earthquake is a very complex rupture event.
The source rupture initiated at the hypocenter (35.95°N, 90.54°E, focal depth 10 km, by USGS NEIC), and propagated to the
west at first. Then, in several minutes to a hundred minutes and over a large spatial range, several rupture growth points
emerged in succession at the eastern end and in the central part of the finite fault. And then the source rupture propagated
from these rupture growth points successively and, finally, stopped in the area within 50 km to the east of the centroid position
(35.80°N, 92.91°E, focal depth 15 km, by Harvard CMT). The entire rupture lasted for 142 s, and the source process could be
roughly separated into three stages: The first stage started at the 0 s and ended at the 52 s, lasting for 52 s and releasing
approximately 24.4% of the total moment; The second stage started at the 55 s and ended at the 113 s, lasting for 58 s and
releasing approximately 56.5% of the total moment; The third stage started at the 122 s and ended at the 142 s, lasting for
20 s and releasing approximately 19.1% of the total moment. The length of the ruptured fault plane is about 490 km. The maximum
width of the ruptured fault plane is about 45 km. The rupture mainly occurred within 30 km in depth under the surface of the
Earth. The average static slip in the underground rocky crust is about 1.2 m with the maximum static slip 3.6 m. The average
static stress drop is about 5 MPa with the maximum static stress drop 18 MPa. The maximum static slip and the maximum stress
drop occurred in an area within 50 km to the east of the centroid position.
Foundation item: Joint Seismological Science Foundation of China (103066) and Foundation of the Seismic Pattern and Digital Seismic Data
Application Research Office of Institute of Earthquake Science of the China Earthquake Administration. 相似文献
17.
Introduction On November 14, 2001, a great earthquake occurred in the western Kunlun Mountain area(Figure 1). The original time is 09h26min10.0s (UTC); the hypocentral location is 35.95°N,90.54°E; focal depth is 10 km from USGS National Earthquake Information Center (NEIC);MS=8.1 from China Seismic Network and Mw=7.8 from Harvard and Earthquake Research Insti-tute (ERI), University of Tokyo. This earthquake, known as the western Kunlun Mountain earth-quake, is an extraord… 相似文献
18.
基于有限断层模型，利用远场体波波形数据研究了2004年7月11日西藏MW62级地震的震源破裂过程.结果表明该地震是一个以倾滑为主的浅源正断层型地震，震源深度为125km，断层面走向152°，倾角44°，平均倾滑角-117°.破裂在震中处成核，然后以28km/s的平均速度向两侧传播，在震中以东偏北5km处达到最大滑动43cm.该地震主张力轴近E W方向，受浅部NNW SSE或N S向裂谷带控制，青藏高原南部的逆冲运动是引发这次地震的直接原因. 相似文献
19.
根据中国和全球地震台网记录的波形记录,采用W震相矩张量反演、反投影分析及有限断层模型反演方法,研究了2016年3月2日印尼7.8级地震破裂过程,分析讨论印尼地震震源运动学特征.结果表明：此地震为一次对称的双侧破裂走滑型事件,北北东─南南西向的断层节面（走向5°/倾角85°）为发震断层面.标量地震矩约6.19×1020 Nm,矩震级为7.79,最大的滑动量约11 m,位于破裂起始点北东,沿着断层走向约30 km处.破裂平均速度2.0~2.2 km·s-1,破裂持续时间35 s,破裂在5~25 s内释放的能量,约占总能量的97%.最终形成了总长度90 km左右的断层.印尼地震具有破裂持续时间短、破裂速度慢、高滑动能量带相对集中等显著特点.本研究对进一步增进海洋岩石圈地震的震源特性认识有重要参考意义. 相似文献
20.
2008年10月5日新疆乌恰Mw6.7级地震发生在南天山、帕米尔高原及塔里木盆地交汇地带,基于地震波反演的震源机制解确定的震源深度存在较大差异.本文利用日本ALOS卫星的PALSAR图像,获得了本次地震的同震形变场,基于卫星视线向（LOS）和方位向（Azimuth）的形变,采用均匀弹性半无限位错模型和有界最小二乘（BVLS）算法,以网格矩形位错元法对发震断层的几何产状、滑移及分布进行了估算,结果表明本次地震以逆断破裂为主,断层面上最大位错量接近3.4 m,形变中心位于73.8040°E,39.5335°N,深度约5 km,震级估算为Mw6.6;地震发生在走向46°,倾角48°的断层上,发震断层长30 km,宽14 km,闭锁深度9 km,符合该地区浅源地震多发的构造特点,发震断层为乌合沙鲁断裂带.InSAR反演的滑移形变主要集中于地下2~7 km,表明乌恰地震为浅源地震,可能与该断层附近历史地震未完全释放的残余应力积累有关.同时,InSAR反演的断层位错分布呈现双破裂特征,震级分别为Mw6.5和Mw6.1,可能与本次地震的主震和余震相对应,也可能是由主震激发而产生的两组破裂. 相似文献