共查询到20条相似文献，搜索用时 162 毫秒
1.
A method for assessing regional debris flow risk: an application in Zhaotong of Yunnan province (SW China) 总被引：6，自引：0，他引：6
Based on the definitions of the United Nations, the assessment of risk involves the evaluation of both hazard and vulnerability. This forms the basis of a generalized assessment model of debris flow risk. Hazard is a measure of the threatening degree of an extreme event and is expressed theoretically as a function of event magnitude and frequency of occurrence. Mathematically, it is the definite integral area under the magnitude–frequency curve. Based on the need for a model applicable in regions that lack data, a new method that incorporates theoretical concepts with empirical analysis is presented to calculate the regional hazardousness of debris flows. Debris flow hazard can be estimated from gully density, mean annual rainfall and percentage of cultivated land on steep slope. Vulnerability is defined as the potential total maximum losses due to a potential damaging phenomenon for a specified area and during a reference period. On a regional scale, it is dependent on the fixed assets, gross domestic product, land resources and population density, as well as age, education and wealth of the inhabitants. A nonlinear, power-function model to compute the vulnerability degree is presented. An application of the proposed method to Zhaotong prefecture of Yunnan province, SW China, provides high accuracy and reasonable risk estimates. The highest risk of debris flow is in Zhaotong county with a value of 0.48; the lowest risk of debris flow is in Yanjin county with a value of 0.16. The other counties have debris flow risks ranging from 0.22 to 0.46. This provides an approach for assessing the regional debris flow risk and a basis for the formulation of a regional risk management policy in Zhaotong prefecture. 相似文献
2.
In many mountainous areas, the rapid development of urbanisation and the limited space in the valley floors have created a need to construct buildings in zones potentially exposed to debris flow hazard. In these zones, a detailed and coherent hazard assessment is necessary to provide an adequate urban planning. This article presents a multidisciplinary procedure to evaluate the debris flow hazard at a local scale. Our four-step approach was successfully applied to five torrent catchments in the Principality of Andorra, located in the Pyrenees. The first step consisted of a comprehensive geomorphologic and geologic analysis providing an inventory map of the past debris flows, a magnitude–frequency relationship, and a geomorphologic–geologic map. These data were necessary to determine the potential initiation zones and volumes of future debris flows for each catchment. A susceptibility map and different scenarios were the principal outcome of the first step, as well as essential input data for the second step, the runout analysis. A one-dimensional numerical code was applied to analyse the scenarios previously defined. First, the critical channel sections in the fan area were evaluated, then the maximum runout of the debris flows on the fan was studied, and finally simplified intensity maps for each defined scenario were established. The third step of our hazard assessment was the hazard zonation and the compilation of all the results from the two previous steps in a final hazard map. The base of this hazard map was the hazard matrix, which combined the intensity of the debris flow with its probability of occurrence and determined a certain hazard degree. The fourth step referred to the hazard mitigation and included some recommendations for hazard reduction. In Andorra, this four-step approach is actually being applied to assess the debris flow hazard. The final hazard maps, at 1 : 2000 scale, provide an obligatory tool for local land use planning. Experience achieved during the study showed that the collaboration between geologists, geomorphologists, engineers, and decision makers is essential and that only a multidisciplinary approach allows for solving all the problems of such a complex process as debris flows. Finally, we propose that our approach may be applied to other mountainous areas, adapting the hazard matrix to new local conditions. 相似文献
3.
Understanding the scale and frequency of physical processes that act upon and form the surface of the Earth is a fundamental goal of earth science. Here we determine the magnitudes of landslides that impact the landscape in terms of work, persistence, and formative events. A systematic analysis of rapid landsliding (the analysis did not consider creep and other slow semi-continuous processes) indicates that moderate-sized landslides do the most work transporting material on hillslopes. The work peak defines the moderate magnitude, and that magnitude varies based on local physiography and climate. Landslides that form the work peak are distinct from catastrophic landslides that are themselves formative and system resetting. The persistence time for debris slides/debris flows (PDS) and rock slides/rock avalanches (PRS) is calculated over six orders of magnitude. We consider an event catastrophic when it persists in the landscape, as described by a persistence ratio (PF), an order of magnitude longer than the population of landslides that form the work peak. 相似文献
4.
西藏帕隆藏布河谷崩塌滑坡、泥石流的分布规律 总被引：11，自引：0，他引：11
西藏帕隆藏布河谷崩塌滑坡、泥石流灾害严重。崩塌滑坡、泥石流的分布 ,因谷坡坡向的水热条件差异而导致坡向差异 ,因地貌发育和形态的沿程分异显现沿程差异 ,因其促发条件的差异又显现灾种差异。采用有序样品最优分割和方差分析等定量方法 ,揭示了崩塌滑坡、泥石流的差异性分布规律 :全河段可分为上游峡谷泥石流密集段 ,中游宽谷泥石流及崩塌滑坡较密集段 ,和下游、拉月曲峡谷崩塌滑坡、泥石流极密集段 ;北岸崩塌滑坡和泥石流比南岸数量多、规模大 ;崩塌滑坡有向下游增大增多之趋势。进而对道路平面选线原则提出了建议。 相似文献
5.
Debris flows are one of the many active slope-forming processes within Glacier National Park, Montana. Most debris flow landforms exhibit classic morphology with a distinct failure scarp, incised channel, channel levees, and toe deposits that often develop a lobate form. The Precambrian metasediments that dominate Glacier National Park's geology weather into angular clasts that range in size from platy gravels to boulders. Classic debris flows occur in areas where the topographic expression provides a debris source from cliff faces and an accumulation of regolith, often in the form of talus slopes. Many of these debris flows have long runout zones and can travel many hundreds of meters. Often they cross hiking trails or roads, including the main east–west highway, Going-to-the-Sun Road. Debris flows impacting the road have resulted in several near fatalities, and hikers have been forced to cross active debris flows to reach safe ground. The magnitude of debris flows varies between high magnitude channel incising events and low magnitude channel filling and/or reworking events. The frequency of debris flow events is irregular and appears to be controlled by the hydrology of triggering storms and antecedent moisture conditions, not by the debris supply. As a result, debris flow magnitude is not a function of frequency, but is more closely related to the characteristics of antecedent conditions and individual storms. 相似文献
6.
7.
Three hundred and sixty three landslides in three watersheds that totaled 382 km2 were identified from air photographs, beginning at a date that preceded logging to the present. The three watersheds all lie on Vancouver Island; however, they have different precipitation regimes, topography, and amounts logged. Landslide areas in the watersheds varied in size from 200 m2 to more than 1 ha. Nearly 80% of the landslides were debris slides; 15% were debris flows, and the remainder primarily rock falls. Following logging, the number of landslides increased substantially in all watersheds although the amount of increase was variable: approximately 11, 3, and 16 times in Macktush Creek, Artlish River, and Nahwitti River, respectively. Other analyses of changes in landslide density also produced highly variable results, with the number of landslides increasing between 2.4 and 24 times. Further, 2–12 times more landslides reached streams following logging activities. Densities for landslides impacting streams increased for the period of record from 1.5 to 10 times following logging activities. The densities were substantially greater where only landslides that reached streams since development began in a watershed were considered. Roads had the greatest spatial impact in the watersheds (compared to their total area), with frequencies determined to have increased by 27, 12, and 94 times for Macktush, Artlish, and Nahwitti, respectively. The results highlight the relative impact of roads and their role in slope stability. 相似文献
8.
Geomorphic hazard assessment of landslide dams in South Westland, New Zealand: fundamental problems and approaches 总被引：2，自引：1，他引：2
Quantitative assessments of landslide hazard usually employ empirical, heuristic, deterministic, or statistical methods to derive estimates of magnitude–frequency distributions of landsliding. The formation and failure of landslide dams are common geomorphic processes in mountain regions throughout the world, causing a series of consequential off-site hazards such as catastrophic outburst floods, debris flows, backwater ponding, up- and downstream aggradation, and channel instability.Conceptual and methodological problems of quantifying geomorphic hazard from landslide dams result from (a) aspects of defining “landslide-dam magnitude”, (b) scaling effects, i.e. the geomorphic long-range and long-term implications of river blockage, and (c) paucity of empirical data. Geomorphic hazard from a landslide dam-break flood on the basis of conditional probabilities is being analysed for the alpine South Westland region of New Zealand, where formation and failure of landslide dams is frequent. Quantification of the annual probability of landsliding and subsequent dam formation in the area is limited by historical and only partially representative empirical data on slope instability. Since landslide-dam stability is a major control governing the potential of catastrophic outburst flooding, the ensuing hazard is best assessed on a recurring basis. GIS-based modelling of virtual landslide dams is a simple and cost-effective approach to approximate site-specific landslide dam and lake dimensions, reservoir infill times, and scaled magnitude of potential outburst floods. Although crude, these order-of-magnitude results provide information critical to natural hazard planning, mitigation, or emergency management decisions. 相似文献
9.
The morphometric and stratigraphic framework for estimates of debris flow incidence in the North Cascades foothills, Washington State, USA 总被引：1，自引：0，他引：1
Active debris flow fans in the North Cascade Foothills of Washington State constitute a natural hazard of importance to land managers, private property owners and personal security. In the absence of measurements of the sediment fluxes involved in debris flow events, a morphological-evolutionary systems approach, emphasizing stratigraphy, dating, fan morphology and debris flow basin morphometry, was used. Using the stratigraphic framework and 47 radiocarbon dates, frequency of occurrence and relative magnitudes of debris flow events have been estimated for three spatial scales of debris flow systems: the within-fan site scale (84 observations); the fan meso-scale (six observations) and the lumped fan, regional or macro-scale (one fan average and adjacent lake sediments). In order to characterize the morphometric framework, plots of basin area v. fan area, basin area v. fan gradient and the Melton ruggedness number v. fan gradient for the 12 debris flow basins were compared with those documented for semi-arid and paraglacial fans. Basin area to fan area ratios were generally consistent with the estimated level of debris flow activity during the Holocene as reported below. Terrain analysis of three of the most active debris flow basins revealed the variety of modes of slope failure and sediment production in the region.Micro-scale debris flow event systems indicated a range of recurrence intervals for large debris flows from 106−3645 years. The spatial variation of these rates across the fans was generally consistent with previously mapped hazard zones. At the fan meso-scale, the range of recurrence intervals for large debris flows was 273−1566 years and at the regional scale, the estimated recurrence interval of large debris flows was 874 years (with undetermined error bands) during the past 7290 years. Dated lake sediments from the adjacent Lake Whatcom gave recurrence intervals for large sediment producing events ranging from 481−557 years over the past 3900 years and clearly discernible sedimentation events in the lacustrine sediments had a recurrence interval of 67−78 years over that same period. 相似文献
10.
Tom&#x; Pnek Jan Hradecký Karel &#x;ilhn Veronika Smolkov Viola Altov 《Geomorphology》2009,108(3-4):171-181
Prominent longitudinal features are often reported on the surfaces of mass movement deposits. However, the genesis and implications of these have not hitherto been considered, and herein we present preliminary observations of their occurrence both in the field and in the laboratory. Elongated ridges are often oriented (sub-) parallel to the flow direction and aligned radially from the source due to debris spreading. They are particularly prominent in large (> 106m3) rock avalanches emplaced onto deformable substrates and are also found in the proximal reaches of volcanic debris avalanches. Flowbands, which are longer and thinner expressions of longitudinal ridges, are continuous along the entire flow length and are observed in rock avalanches emplaced onto glaciers, in snow and some ice avalanches, in pyroclastic flows and some block-and-ash flows, in ejecta sheets, in extraterrestrial landslides, and in some volcanic debris avalanches. Other volcanic debris avalanches and the distal areas of rock avalanches often display hummocks that are aligned radially from the source; we propose that these aligned hummocks are remnants of longitudinal ridges. The formation of elongate ridges (and their expressions as flowbands, aligned hummocks, or distal lobes and digits) in qualitatively-similar fashion in both laboratory and field environments suggests they represent an intrinsic tendency of granular flows in a wide range of situations. 相似文献
11.
Contrasting rainfall generated debris flows from adjacent watersheds at Forest Falls, southern California, USA 总被引：1，自引：0，他引：1
Debris flows are widespread and common in many steeply sloping areas of southern California. The San Bernardino Mountains community of Forest Falls is probably subject to the most frequently documented debris flows in southern California. Debris flows at Forest Falls are generated during short-duration high-intensity rains that mobilize surface material. Except for debris flows on two consecutive days in November 1965, all the documented historic debris flows have occurred during high-intensity summer rainfall, locally referred to as ‘monsoon’ or ‘cloudburst’ rains. Velocities of the moving debris range from about 5 km/h to about 90 km/h. Velocity of a moving flow appears to be essentially a function of the water content of the flow. Low velocity debris flows are characterized by steep snouts that, when stopped, have only small amounts of water draining from the flow. In marked contrast are high-velocity debris flows whose deposits more resemble fluvial deposits. In the Forest Falls area two adjacent drainage basins, Snow Creek and Rattlesnake Creek, have considerably different histories of debris flows. Snow Creek basin, with an area about three times as large as Rattlesnake Creek basin, has a well developed debris flow channel with broad levees. Most of the debris flows in Snow Creek have greater water content and attain higher velocities than those of Rattlesnake Creek. Most debris flows are in relative equilibrium with the geometry of the channel morphology. Exceptionally high-velocity flows, however, overshoot the channel walls at particularly tight channel curves. After overshooting the channel, the flows degrade the adjacent levee surface and remove trees and structures in the immediate path, before spreading out with decreasing velocity. As the velocity decreases the clasts in the debris flows pulverize the up-slope side of the trees and often imbed clasts in them. Debris flows in Rattlesnake Creek are relatively slow moving and commonly stop in the channel. After the channel is blocked, subsequent debris flows cut a new channel upstream from the blockage that results in the deposition of new debris-flow deposits on the lower part of the fan. Shifting the location of debris flows on the Rattlesnake Creek fan tends to prevent trees from becoming mature. Dense growths of conifer seedlings sprout in the spring on the late summer debris flow deposits. This repeated process results in stands of even-aged trees whose age records the age of the debris flows. 相似文献
12.
Initiation conditions for debris flows generated by runoff at Chalk Cliffs, central Colorado 总被引：7，自引：1，他引：6
We have monitored initiation conditions for six debris flows between May 2004 and July 2006 in a 0.3 km2 drainage basin at Chalk Cliffs; a band of hydrothermally-altered quartz monzonite in central Colorado. Debris flows were initiated by water runoff from colluvium and bedrock that entrained sediment from rills and channels with slopes ranging from about 14° to 45°. The availability of channel material is essentially unlimited because of thick channel fill and refilling following debris flows by rock fall and dry ravel processes. Rainfall exceeding I = 6.61(D)− 0.77, where I is rainfall intensity (mm/h), and D is duration (h), was required for the initiation of debris flows in the drainage basin. The approximate minimum runoff discharge from the surface of bedrock required to initiate debris flows in the channels was 0.15 m3/s. Colluvium in the basin was unsaturated immediately prior to (antecedent) and during debris flows. Antecedent, volumetric moisture levels in colluvium at depths of 1 cm and 29 cm ranged from 4–9%, and 4–7%, respectively. During debris flows, peak moisture levels in colluvium at depths of 1 cm and 29 cm ranged from 10–20%, and 4–12%, respectively. Channel sediment at a depth of 45 cm was unsaturated before and during debris flows; antecedent moisture ranged from 20–22%, and peak moisture ranged from 24–38%. Although we have no measurements from shallow rill or channel sediment, we infer that it was unsaturated before debris flows, and saturated by surface-water runoff during debris flows.Our results allow us to make the following general statements with regard to debris flows generated by runoff in semi-arid to arid mountainous regions: 1) high antecedent moisture levels in hillslope and channel sediment are not required for the initiation of debris flows by runoff, 2) locations of entrainment of sediment by successive runoff events can vary within a basin as a function of variations in the thickness of existing channel fill and the rate of replenishment of channel fill by rock fall and dry ravel processes following debris flows, and 3) rainfall and simulated surface-water discharge thresholds can be useful in understanding and predicting debris flows generated by runoff and sediment entrainment. 相似文献
13.
To reduce the hazards from debris flows in drainage basins burned by wildfire, erosion control measures such as construction of check dams, installation of log erosion barriers (LEBs), and spreading of straw mulch and seed are common practice. After the 2002 Missionary Ridge Fire in southwest Colorado, these measures were implemented at Knight Canyon above Lemon Dam to protect the intake structures of the dam from being filled with sediment. Hillslope erosion protection measures included LEBs at concentrations of 220–620/ha (200–600% of typical densities), straw mulch was hand spread at concentrations up to 5.6 metric tons/hectare (125% of typical densities), and seeds were hand spread at 67–84 kg/ha (150% of typical values). The mulch was carefully crimped into the soil to keep it in place. In addition, 13 check dams and 3 debris racks were installed in the main drainage channel of the basin.The technical literature shows that each mitigation method working alone, or improperly constructed or applied, was inconsistent in its ability to reduce erosion and sedimentation. At Lemon Dam, however, these methods were effective in virtually eliminating sedimentation into the reservoir, which can be attributed to a number of factors: the density of application of each mitigation method, the enhancement of methods working in concert, the quality of installation, and rehabilitation of mitigation features to extend their useful life. The check dams effectively trapped the sediment mobilized during rainstorms, and only a few cubic meters of debris traveled downchannel, where it was intercepted by debris racks.Using a debris volume-prediction model developed for use in burned basins in the Western U.S., recorded rainfall events following the Missionary Ridge Fire should have produced a debris flow of approximately 10,000 m3 at Knight Canyon. The mitigation measures, therefore, reduced the debris volume by several orders of magnitude. For comparison, rainstorm-induced debris flows occurred in two adjacent canyons at volumes within the range predicted by the model. 相似文献
14.
Shou-Hao ChiangKang-Tsung Chang Alessandro C. MondiniBor-Wen Tsai Chen-Yu Chen 《Geomorphology》2012,138(1):306-318
A coupled model has been developed to simulate, at watershed level, landslides and debris flows induced by a severe typhoon (tropical cyclone) in Taiwan. The model comprises a landslide susceptibility model to predict landslide occurrence, an empirical model to select debris-flow initiation points, and a debris flow model to simulate the transport and deposit of failed materials from the identified source areas. In raster format with a 10 m spatial resolution, the model output includes unstable cells, debris-flow initiation cells, debris-flow velocities, runout paths, and deposition zones. The model was first tested and calibrated in a small area, where the damage by landslides had been investigated and recorded. It was then applied to a watershed, and the simulation results were validated by comparing them with a landslide/debris-flow inventory map prepared from satellite images using a multiple change detection technique. Model test and validation results confirm the usefulness of the model in predicting the number and size of affected areas (landslides and runouts combined), runout path, and volume of runout deposits. It is a common practice in Taiwan to separate landslide and debris-flow inventories and to study debris flows only in select drainage basins. This study suggests that landslide and debris flow should be modeled as a sequential process for efficient watershed management. 相似文献
15.
Sources of debris flow material in burned areas 总被引：6，自引：2，他引：4
Paul M. Santi Victor G. deWolfe Jerry D. Higgins Susan H. Cannon Joseph E. Gartner 《Geomorphology》2008,96(3-4):310
The vulnerability of recently burned areas to debris flows has been well established. Likewise, it has been shown that many, if not most, post-fire debris flows are initiated by runoff and erosion and grow in size through erosion and scour by the moving debris flow, as opposed to landslide-initiated flows with little growth. To better understand the development and character of these flows, a study has been completed encompassing 46 debris flows in California, Utah, and Colorado, in nine different recently burned areas. For each debris flow, progressive debris production was measured at intervals along the length of the channel, and from these measurements graphs were developed showing cumulative volume of debris as a function of channel length. All 46 debris flows showed significant bulking by scour and erosion, with average yield rates for each channel ranging from 0.3 to 9.9 m3 of debris produced for every meter of channel length, with an overall average value of 2.5 m3/m. Significant increases in yield rate partway down the channel were identified in 87% of the channels, with an average of a three-fold increase in yield rate. Yield rates for short reaches of channels (up to several hundred meters) ranged as high as 22.3 m3/m. Debris was contributed from side channels into the main channels for 54% of the flows, with an average of 23% of the total debris coming from those side channels. Rill erosion was identified for 30% of the flows, with rills contributing between 0.1 and 10.5% of the total debris, with an average of 3%. Debris was deposited as levees in 87% of the flows, with most of the deposition occurring in the lower part of the basin. A median value of 10% of the total debris flow was deposited as levees for these cases, with a range from near zero to nearly 100%. These results show that channel erosion and scour are the dominant sources of debris in burned areas, with yield rates increasing significantly partway down the channel. Side channels are much more important sources of debris than rills. Levees are very common, but the size and effect on the amount of debris that reaches a canyon mouth is highly variable. 相似文献
16.
Lithologic control of debris torrent occurrence 总被引：1，自引：0，他引：1
A field-based investigation into the frequency and magnitude of debris torrent systems reveals that lithology controls the spatial and temporal occurrence of debris torrents in the Tsitika Watershed, Vancouver Island, British Columbia. We identified 125 debris torrent systems in the watershed; for half these basins we used dendrochronology, historical air photographs, and field surveys to estimate debris torrent frequency and magnitude for a 30 year period. We find that the volcaniclastic half of the watershed contains more than twice as many debris torrent systems, in which debris torrents occur over seven times more frequently, and the deposits have a higher rate of delivery of sediment to the mainstem river than the intrusive half. Lithologic differences in weathering rates, weathering product grain size, and rock texture can explain the observed differences in debris torrent behaviour. Because debris torrents are the main sediment transport path from hilltop to valley bottom in the region, these results confirm an important lithologic control on regional sediment transport. While the exact numbers are uncertain, we estimate that the sediment flux of volcaniclastic debris torrents in the watershed is five times higher than that of the intrusive debris torrents. 相似文献
17.
Debris flows are very important and widespread mass movements, and represent a remarkable geomorphological hazard. This research deals with debris flows in an alpine environment, studied using dendrogeomorphological dating techniques, outlining their relation with precipitation, and analysing possible changes in their frequency and intensity over time. The study area is the upper Valle del Gallo (Northern Italy), a typical high mountain environment dominated by mass wasting processes, where many debris-flow fans occupy the valley bottom. Dendrogeomorphological research was conducted on twelve of these fans and two channels located on slopes. Tree growth anomalies (abrasion scars, compression wood and abrupt growth changes) were used as dating methods. Two hundred and thirty nine debris debris-flow events between 1875 and 2003 were dated using 757 trees (Pinus montana Mill.). Analysis between dated events and precipitation suggests that debris flows in the study area could be triggered by 20–30 mm of rain concentrated in a few hours. The debris-flow frequency tends to increase gradually, but the highest value seems to have occurred in the period 1974–1983. This trend agrees with the historical occurrence of flooding events in Northern Italy as inferred by literature, and with similar studies conducted in the Swiss Alps. The results of this research are intended as a contribution for understanding the response of geomorphological processes to climatic changes. 相似文献
18.
In modelling complex a-centric phenomena which evolve through local interactions within a discrete time-space, cellular automata (CA) represent a valid alternative to standard solution methods based on differential equations. Flow-type phenomena (such as lava flows, pyroclastic flows, earth flows, and debris flows) can be viewed as a-centric dynamical systems, and they can therefore be properly investigated in CA terms.SCIDDICA S4a is the last release of a two-dimensional hexagonal CA model for simulating debris flows characterised by strong inertial effects. S4a has been obtained by progressively enriching an initial simplified model, originally derived for simulating very simple cases of slow-moving flow-type landslides.Using an empirical strategy, in S4a, the inertial character of the flowing mass is translated into CA terms by means of local rules. In particular, in the transition function of the model, the distribution of landslide debris among the cells is obtained through a double cycle of computation. In the first phase, the inertial character of the landslide debris is taken into account by considering indicators of momentum. In the second phase, any remaining debris in the central cell is distributed among the adjacent cells, according to the principle of maximum possible equilibrium.The complexities of the model and of the phenomena to be simulated suggested the need for an automated technique of evaluation for the determination of the best set of global parameters. Accordingly, the model is calibrated using a genetic algorithm and by considering the May 1998 Curti–Sarno (Southern Italy) debris flow.The boundaries of the area affected by the debris flow are simulated well with the model. Errors computed by comparing the simulations with the mapped areal extent of the actual landslide are smaller than those previously obtained without genetic algorithms. As the experiments have been realised in a sequential computing environment, they could be improved by adopting a parallel environment, which allows the performance of a great number of tests in reasonable times. 相似文献
19.
Characteristics of surface particles on four fans dominated by different depositional processes are investigated in the sedimentary ranges of the Aoraki–Mount Cook area, Southern Alps, New Zealand. Statistical testing shows that on three of the fans all indices of particle size and roundness differ significantly according to the depositional process: snow avalanches produce the largest and most angular particles, streamflows the smallest and most rounded, with debris flows in between. On the fourth fan affected by all of these depositional processes, particle size and roundness indicate that snow avalanches are presently dominant with streamflow playing a secondary role. The results also show that all indices of particle size are strongly correlated with each other and suggest that the principal (a-) or intermediate (b-) axis length may provide a satisfactory substitute for more complex indices of size. Indices of particle shape generally do not differ significantly between the fans, reflecting both the strong control exerted on particle shape by source area lithology and structure and the geologic similarity of the four basins. Changes in particle size and roundness occur with down-fan distance on the snow avalanche, debris flow, and hybrid fans but not on the streamflow fan. 相似文献
20.
中国西南山区沟谷暴雨泥石流危险度判定的基本原理和方法 总被引：3，自引：0，他引：3
本研究提出了通用于沟谷暴雨泥石流危险度判定的三项基本原理:主次因子原理、因子权重原理和定量赋值原理。首次提出了泥石流危险度的多因子综合定量判定模式和计算公式,为我国西南(西北)山区沟谷暴雨泥石流灾害评估提供了较为先进的实用方法。在云南部分地区的判定检验和应用实践表明,本法具有60%以上的可靠度。可应用于我国西南(西北)山区一切有可能发生暴雨泥石流的自然沟谷和已确认的暴雨泥石流沟谷。 相似文献