共查询到20条相似文献，搜索用时 23 毫秒
1.
动剪切模量和阻尼比是工程场地地震安全性评价及地基动力反应分析的重要动力学参数。为评价某海域海洋土的动力学特性,对10.3～84.2 m深度范围内的海底淤泥质粉质黏土、粉砂及细砂开展共振柱试验。利用双对数模型建立了最大动剪切模量随上覆压力的递增关系。研究发现,现有规范的剪切模量比与阻尼比的推荐取值并不适用于海洋沉积土,即使考虑借鉴以往研究成果也必须将其限制在一定的应变范围,并应考虑土体的天然应力状态取值。利用马丁-达维登科夫（Martin- Davidenkov）模型及阻尼比与剪应变的经验关系建立了剪切模量比和阻尼比随剪应变的变化规律,并由此提出了适用于海洋沉积土的5×10-6～10-3应变范围内剪切模量比及阻尼比的推荐值。研究成果可为海洋工程场地的设计、施工及抗震分析提供技术参考依据。 相似文献
2.
刚度和阻尼频率相关的等效线性化方法 总被引：4，自引：0，他引：4
在实际工程中发现,在强地震动作用下等效线性化方法低估了地表地震动的峰值加速度反应。通过与场地效应竖向台阵观测记录的对比分析证实了这一现象,其主要原因是等效剪应变水平的取值高于高频段实际剪应变水平,从而抑制了土层地震反应中的高频成份。若干分析表明,动力反应过程中土体的剪应变是随频率而变化的,且试验表明土体的刚度和阻尼是与剪应变相关的,据此假设土体刚度和阻尼是与频率相关的。基于这一假设,对传统等效剪应变的选取如何使得土层对基底地震动输入中的高频成分产生滤波效应的原理进行探讨,且通过频率相关的等效线性化方法对该原理进行证明。将该方法应用于Port Island场地效应竖向台阵的分析,并与实际地震动记录进行了对比,结果表明,较之传统等效线性化方法,能更加合理地考虑地震动输入中的高频成分。 相似文献
3.
地震等随机循环荷载作用时,常需定义较为复杂的加卸载准则(如扩展Masing准则)来描述土体应力-应变滞回曲线,导致求解过程中需预留大量的状态变量,不便于编程实现;同时,现有Masing模型及其改进模型大多仅对动剪切模量曲线进行拟合,还鲜有考虑对阻尼比曲线的拟合。针对以上两个问题,构建了基于修正阻尼的不规则加卸载准则。该准则克服了上大圈准则需要记忆所有转向点的问题,只需要记忆当前转向点和历史最值,记忆量大大减小;同时该准则能同时考虑动剪切模量和阻尼比曲线,达到了修正阻尼比的目的。基于Matasovic骨架曲线,结合提出的加卸载准则,提出了土体非线性模型并将其开发于Abaqus软件中,通过求解Mississippi湾场地地震反应,并与Deepsoil软件和Davidenkov-Chen-Zhao(DCZ)模型计算得到的场地地震反应结果进行对比分析,验证了所提不规则加卸载准则的正确性。同时,对日本KiK-net强震台网的KSRH10场地进行了地震反应分析,并与加速度时程记录及其谱加速度进行比较,验证了所提模型的适用性。 相似文献
4.
Appropriate evaluation of shear modulus and damping characteristics of soils subjected to dynamic loading is key to accurate
seismic response analysis and soil modeling programs. Dynamic centrifuge experiments were conducted at C-CORE (Memorial University
of Newfoundland) centrifuge center to investigate the dynamic properties and seismic response of soft clay and dry loose sand
strata. Soft clay with shear strength of about 30 kPa and well graded silica sand at about 35% relative density were employed
in a rigid container to simulate local site effects. Several earthquake-like shaking events were applied to the model to evaluate
variation of shear modulus and damping ratio with shear strain amplitude and confining pressure, and to assess their effects
on site response. The estimated modulus reduction and damping ratio were compared to the predictions of empirical formulae
and resonant column tests for both soft clay and loose sand. The evaluated shear modulus and damping ratio were found to be
dependent on confining pressure in both soil types. Modulus variation in both soils agreed well with the empirical curves
and resonant column test results. However, the sand modulus values were slightly higher than the empirical relations and resonant
column tests. This discrepancy is attributed to higher stress and densification of sand during large amplitude shaking applied
to the model. The damping ratio at shear strains lower than 0.5% was in reasonable agreement with the empirical curves and
the resonant column tests in both clay and sand models, but was generally higher at shear strain larger than 0.5%. 相似文献
5.
Abbas Abbaszadeh Shahri Bijan Esfandiyari Roshanak Rajablou 《Arabian Journal of Geosciences》2012,5(4):555-564
During the earthquakes, a number of earth dams have had severe damages or suffered major displacements as a result of liquefaction, thus modeling by computer codes can provide a reliable tool to predict the response of the dam foundation against earthquakes. These modeling can be used in the design of new dams or safety assessments of existing ones. In this paper, on the basis of the field and laboratory tests and by combination of several software packages a seismic geotechnical-based analysis procedure is proposed and verified by comparison with computer model tests and field and laboratory experiences. Verification or validation of the analyses relies to the ability of the applied computer codes. By using the Silakhor earthquake (2006, M s 6.1) as a basis in order to check the efficiency of the proposed framework, the procedure is applied to the Korzan earth dam of Iran which is located in Hamedan Province to analyze and estimate the liquefaction and safety factor. Design and development of a computer code by the authors which was named as the ??Abbas Converter?? with graphical user interface which operates as logic connecter function that can compute and model the soil profiles is the critical point of this study. The results confirmed and proved the ability of the generated computer code on the evaluation of soil behavior during earthquake excitations. Also, this code was able to facilitate this study better than previous ones have, taking over the encountered problem. 相似文献
6.
Propagation of seismic waves through soil layers would drastically change the frequency content and amplitude-based features of ground motions at the surface. These alterations are known as seismic site effects. Computation of site effects of high-populated areas such as large cities is of great importance (e.g., it is used in development of seismic microzonation of a region). Shiraz is one of the most populous cities of Iran and is located in a high seismic hazardous region. A representative clay site in this city is selected to assess local site effects. The time series and random vibration theory procedure in the frequency domain are implemented to analyze the aforementioned site. Furthermore, the nonlinear dynamic soil behavior is simulated by the equivalent linear method and the nonlinear method via DEEPSOIL program. Three types of soil column uncertainties such as shear wave velocity, modulus reduction, and damping ratio of soil layers as well as depth of underlying rock half-space (D bed) are considered herein. The mean amplification and standard deviation of natural logarithm of amplification factors are computed for a variety of analysis types. The results of the current study show that the computed mean and standard deviation of amplification factor in ln units by considering only V S uncertainty are in good agreement with the corresponding ones by considering V S and modulus reduction and damping ratio variabilities simultaneously for the studied site. Furthermore, it seems that the effect of bedrock depth in definition of spectral shapes of the Iranian seismic building code should be taken into account. 相似文献
7.
采用基于状态相关的剪胀理论的临界状态砂土模型,以SUMDES2D为有限元平台,对直接建造在基岩上的心墙堆石坝进行了1组抗震性能计算,分析了坝体在不同的地震强度下的动力响应,以研究地震强度对土石坝变形机理的影响。计算结果表明,地震强度越大,地震所引发永久变形和局部变形就越大; 文中除了给出土石坝的总体位移及变形状况外,还提供了堆石坝在某些局部位置的应力路径和应力应变关系,探讨了不同地震强度下坝体破坏的内在机理。局部土单元的动力响应,揭示位于坝体上游坝坡马道附近单元由于密实度小,在应力不大的情况下就达到材料的临界状态,随着地震强度的增加,该部位由稳定逐步过渡到临界状态,而后沿着临界状态线发展,土单元由稳定逐步过渡到流动变形。 相似文献
8.
强风化花岗岩动力学参数的试验研究 总被引：1，自引：0，他引：1
地震反应分析通常采用等效非线性模型,动剪切模量G和阻尼比λ是该模型的两个重要参数。为研究目前在大型工程建设中遇到越来越多的强风化花岗岩的动力特性,利用固定-自由型共振柱（GDS RCA）对强风化花岗岩的剪切模量和阻尼比进行试验研究。GDS RCA为一种国际上广泛应用的共振柱,具有良好的性能,利用其控制试样的固结围压和孔隙水压力,可以测得试样在不同有效应力状况下的动剪切模量和阻尼比。对比研究不同有效应力下共振频率、动剪切模量和阻尼比随剪应变的变化情况,给出其变化曲线。按照Hadin-Drnevich[1]所提出的双曲线模型,拟合动剪切模量比和阻尼比随剪应变的变化曲线。利用摩擦理论,对试样阻尼的产生机制进行探讨。试验结果表明,随着剪应变的增加,试样系统的共振频率随之减小,试样阻尼比随之增大;试样的动剪切模量和阻尼比皆与试样固结时的有效应力有关,而试样阻尼比也受孔隙水压力的影响。 相似文献
9.
Delhi, the capital of India, has experienced mild seismic shaking during several earthquakes in the past. The large variations of depth to bedrock and ground water table coupled with different soil types at different locations of Delhi necessitate a seismic microzonation study. Dynamic soil properties such as shear wave velocity, modulus reduction and damping characteristics of local soils are the basic and essential input parameters for conducting even a preliminary ground response analysis which is an essential input in microzonation studies. Shear wave velocity is not measured routinely due to its high cost and lack of the required expertise. Several researchers in the past developed correlations between shear wave velocity (V s ) and routinely measured N values. In the present study, shear wave velocity profiles measured in the field at more than 80 borehole locations to a depth of about 20 to 32m using Spectral Analysis of Surface Waves (SASW) are presented and correlations between shear wave velocity and N values are also presented for use by engineers and designers. Results of strain and stress controlled cyclic triaxial tests on remoulded samples of sand-silt mixtures in the high strain range are used for generating the modulus reduction and damping curves and are compared with the well-known curves in the literature. The results presented in this article can be used for microzonation studies as well as site specific ground response analyses at Delhi. 相似文献
10.
Aliakbar Hajimohammadi Seyed Majdeddin Mir Mohammad Hosseini Akbar Cheshomi 《Environmental Earth Sciences》2010,61(4):813-820
Shear wave velocity is one of the important factors representing the dynamic characteristics of soil layers. Hence, many researchers
have focused their studies on determining shear wave velocity by direct field measurements or expressions developed by other
soil parameters. The shear module and damping ratio of the soil layers also play a similar role in the majority of dynamic
soil response analyses. Nevertheless, since they have to be measured in the laboratory by resonant column or cyclic triaxial
tests on undisturbed samples, the possibility of preparing such samples and the reliability of the obtained results are of
great concerns. In the present study, great effort has been made to determine the above dynamic factors by means of field
data obtained from a versatile instrument, namely the seismic piezocone (SPCTU), and to derive expressions correlating them with some parameters obtainable by much simpler instruments. The reliability
of laboratory measurements on undisturbed samples is also evaluated. The seismic piezocone test apparatus has been employed
to evaluate the soil properties at 1-m depth intervals by means of measuring tip resistance, sleeve resistance, pore pressure
and shear wave velocity. The shear module and the damping ratio are calculated using field data. Meanwhile, in order to assess
the laboratory measurements of these parameters, some resonant column tests and cyclic triaxial tests on undisturbed samples
of the same soil layers have been carried out. In order to compare the field results of shear modulus and damping ratios with
those obtained from laboratory tests, the influences of the soil nature and sample disturbance on the conventional laboratory
methods are evaluated and discussed. The shear wave velocity is correlated to overburden pressure and the corrected tip resistance
for two groups of fine soils, namely silty clays and carbonate clayey silts, which mainly cover the areas under study in this
project, are located in southern parts of Iran near the Persian Gulf. According to the results of the present study, there
are narrow limits of shear modulus regarding soils for which the laboratory tests and the field measurements yield approximately
the same shear modulus. This limit of shear modulus is about 30–50(MPa) for clay deposits and 70–100 (MPa) for sandy deposits.
Also the shear wave velocity can be calculated by a simple expression from total overburden pressure and the tip resistance
of simple cone penetration test results conventionally available in many soil explorations prior to engineering practices.
However, if the pore pressure inside the saturated soil deposits can be measured by a piezocone apparatus, the shear wave
velocity may be calculated using another suggested equation in terms of effective overburden pressure in the present study.
Regarding the shear module and the damping ratio, due to the disturbances of the stiff deposits in the sampling process and
great deviations of laboratory results from field results, the laboratory measurements of these parameters out of the above
limits are not recommended. 相似文献
11.
The role of the seismic soil–pile–structure interaction (SSPSI) is usually considered beneficial to the structural system under seismic loading since it lengthens the lateral fundamental period and leads to higher damping of the system in comparison with the fixed-base assumption. Lessons learned from recent earthquakes show that fixed-base assumption could be misleading, and neglecting the influence of SSPSI could lead to unsafe design particularly for structures founded on soft soils. In this study, in order to better understand the SSPSI phenomena, a series of shaking table tests have been conducted for three different cases, namely: (i) fixed-base structure representing the situation excluding the soil–structure interaction; (ii) structure supported by shallow foundation on soft soil; and (iii) structure supported by floating (frictional) pile foundation in soft soil. A laminar soil container has been designed and constructed to simulate the free field soil response by minimising boundary effects during shaking table tests. In addition, a fully nonlinear three dimensional numerical model employing FLAC3D has been adopted to perform time-history analysis on the mentioned three cases. The numerical model adopts hysteretic damping algorithm representing the variation of the shear modulus and damping ratio of the soil with the cyclic shear strain capturing the energy absorbing characteristics of the soil. Results are presented in terms of the structural response parameters most significant for the damage such as foundation rocking, base shear, floor deformation, and inter-storey drifts. Comparison of the numerical predictions and the experimental data shows a good agreement confirming the reliability of the numerical model. Both experimental and numerical results indicate that soil–structure interaction amplifies the lateral deflections and inter-storey drifts of the structures supported by floating pile foundations in comparison to the fixed base structures. However, the floating pile foundations contribute to the reduction in the lateral displacements in comparison to the shallow foundation case, due to the reduced rocking components. 相似文献
12.
Ground motion records obtained in recent major strong earthquakes have provided evidence that ground motions recorded near the near-fault regions differ in many cases from those observed further away from the seismic source. As the forward directivity and fling effect characteristics of the near-fault ground motions, they have the potential to cause more considerable damage to structures during an earthquake. Therefore, understanding the influence of near-fault ground motions on the performance of structures is critical to mitigate damage and perform effective response. This paper presents results of a study aimed at evaluating the effects of near-fault and far-fault ground motions on seismic performance of concrete gravity dams including dam-reservoir-foundation interaction. Koyna gravity dam is selected as a numerical application. Four different near-fault ground motion records with an apparent velocity pulse are used in the analyses. The earthquake ground motions recorded at the same site from other events that the epicenter far away from the site are employed as the far-fault ground motions. The seismic performance evaluation method based on the demand-capacity ratio, the cumulative overstress duration and the spatial extent of overstressed regions is presented. The concrete damaged plasticity model including the strain hardening or softening behavior is employed in nonlinear analyses. Nonlinear seismic damage analyses of the selected concrete dam subjected to both near-fault and far-fault ground motions are performed. The results obtained from the analyses show the effects of near-fault ground motions on seismic performance of concrete gravity dams and demonstrate the importance of considering the near-fault ground excitations. 相似文献
13.
Intermediate-depth earthquakes in the Vrancea region occur in response to stress generation due to descending lithosphere
beneath the southeastern Carpathians. In this article, tectonic stress and seismicity are analyzed in the region on the basis
of a vast body of observations. We show a correlation between the location of intermediate-depth earthquakes and the predicted
localization of maximum shear stress in the lithosphere. A probabilistic seismic hazard assessment (PSHA) for the region is
presented in terms of various ground motion parameters on the utilization of Fourier amplitude spectra used in engineering
practice and risk assessment (peak ground acceleration, response spectra amplitude, and seismic intensity). We review the
PSHA carried out in the region, and present new PSHA results for the eastern and southern parts of Romania. Our seismic hazard
assessment is based on the information about the features of earthquake ground motion excitation, seismic wave propagation
(attenuation), and site effect in the region. Spectral models and characteristics of site-response on earthquake ground motions
are obtained from the regional ground motion data including several hundred records of small and large earthquakes. Results
of the probabilistic seismic hazard assessment are consistent with the features of observed earthquake effects in the southeastern
Carpathians and show that geological factors play an important part in the distribution of the earthquake ground motion parameters. 相似文献
14.
15.
汶川5月12日8.0级地震在构造上起因于印度板块与欧亚板块以每年约5 cm的速度聚敛,并因此而引起青藏高原的地壳物质向四川盆地及中国东南大陆运移.主震震源及余震活动集中于以龙门山为中轴的一条长约350 km、宽约100 km的地震活动带.震源深度一般分布丁地壳脆性-韧性转换边界以上约10～20 km区间的地壳震源层之中,属浅源构造地震.主要震源机制与龙门山构造运动方式密切相关,以其地壳厚度向西急剧加厚、重力梯度带、高波速比(Vp/Vs～2.2)等深部异常及逆冲断层兼具走滑性质的地质构造为特征.在震源辐射、路径传播和场地效应研究的基础上,分别计算并比较了岩石和土壤条件下的地震响应谱,特别强调了土壤条件下的场地放大效应;同时对与地震安全性有关的一些问题如地质灾害、地震频谱设计、地震早期预警系统及中、长期至短期地震预报等进行了探讨;特别提供了一个由加权平均计算、以岩石条件下震波衰减模式为基础的地震频谱设计参考实例.地震构造与动力学研究可融人工程地质与环境工程等学科发展.经历汶川地震考验的一些新近设计和建设的工程项目可为今后改进工程建筑规范与标准提供重要而有益的参考.地震预报是当今一大难题,但需探索研究,不可懈怠.地震减灾与预防足目前比较切合实际的安全举措. 相似文献
16.
已有震害研究表明,震后边坡会因持续变形而破坏,且伴随着土体强度逐渐降低的现象,即土的循环软化行为。因此,有必要研究考虑循环软化的非线性动力本构模型以用于复杂条件下地震边坡稳定性分析。在已有的非线性动力本构模型基础上,提出了考虑循环软化的处理方法。同时,在FLAC3D平台上实现了本构模型二次开发,并通过了理论公式与已有文献中试验数据的验证。结果表明：计算出的骨干曲线与理论公式一致,且计算出的动剪切模量比及阻尼比与试验数据吻合较好,能够克服Hardin-Drnevich模型和Davidenkov模型在较大应变处（>0.01%）过高地估算阻尼比的缺陷;考虑了循环软化后,计算出的剪切强度有明显降低,且当遇到骨干曲线剪应力可以连续地过渡到软化后的主干曲线上,模型的收敛性较好。所开发的本构模型可为大应变条件下软土场地及边坡地震灾害评估提供支持。 相似文献
17.
Adel Javdani Naeini A. J. Choobbasti M. Saadati 《Arabian Journal of Geosciences》2013,6(11):4487-4497
The significance of liquefaction-related damage to pile foundations has been clearly demonstrated by the major earthquakes occurring during past years. The current project investigates the seismic behaviour of a single pile in the three-layered soil of the Babol City centre site (located in Babol City, Mazandaran Province, Iran). The site soil consists of sandy and clayey soils modelled based on the data collected from drilled boreholes. Numerical analysis was performed using Flac2D finite difference program. Three different natural ground motion records are considered, and the influence of each earthquake on the bending moment and lateral displacement of the simulated pile is investigated. In addition, the effect of vertical surcharge on the settlement of the pile during the earthquakes is investigated. Results illustrate that the maximum bending moment has occurred on the interface of liquefiable and non-liquefiable soil layers. 相似文献
18.
Sliding of natural and artificial slopes generally occurs during or following strong earthquakes. Such sliding is greatly affected by a combination of geological conditions and earthquake loading. Earthquake-induced landslides often cause more damage to infrastructure and human lives than the earthquake itself. Pseudo-static analysis is widely implemented as one of several design methods used in engineering practice to assess the seismic stability of natural and artificial slopes. However, the most important issue of pseudo-static analysis is to select the most appropriate method for measuring seismic coefficient. In order to investigate this, back analysis was conducted for surficial slides subjected to strong ground motion during the 2004 Mid-Niigata prefecture earthquake in Japan. This paper surveyed the stochastic properties of earthquake-induced surficial slides and clearly showed that the obtained results were applicable to back analysis of shear strength and seismic coefficient. In back analysis, soil properties such as soil strength and density and sliding depth were assumed as random variables owing to their uncertainties. Seismic coefficient is also assumed to be a random variable and varies with distance from the epicenter fault line. The analysis of 4504 recorded surficial slides clearly shows a unique relationship of landslide occurrence ratio with slope angle and distance from the epicenter fault line. This study’s results enhance the calculation of the shear strength of weathered soil covering slopes and the horizontal seismic coefficient through back analysis procedure. By considering possible stochastic properties of variables, some case studies were implemented in the back analysis. 相似文献
19.
互层土的动参数试验研究及其地震反应分析 总被引：3，自引：0，他引：3
通过对两个工程场地的淤泥质粉质粘土、粉土、粘土、粉细砂及粉土与（粉质）粘土、粘土与粉砂互层土的自振柱试验结果进行分析,给出了部分土的 - 和 - 曲线,与Seed和Idriss建议的砂土和粘性土的 - 和 - 曲线变化范围进行了对比;同时分析了这两个场地的地震反应,结果表明：在强震时互层土对地震波有很强的滤波作用,且互层土的最大剪应变远大于一般土,在水平地震作用下很容易接近或达到破坏状态。初步分析结果表明：互层土具有软土的动力特性,这主要是由互层土的特殊物理构造造成的,即在互层土中存在很密的水平薄弱面。 相似文献
20.
In geotechnical earthquake engineering, wave propagation plays a fundamental role in engineering applications related to the dynamic response of geotechnical structures and to site response analysis. However, current engineering practice is primarily concentrated on the investigation of shear wave propagation and the corresponding site response only to the horizontal components of the ground motion. Due to the repeated recent observations of strong vertical ground motions and compressional damage of engineering structures, there is an increasing need to carry out a comprehensive investigation of vertical site response and the associated compressional wave propagation, particularly when performing the seismic design for critical structures (e.g. nuclear power plants and high dams). Therefore, in this paper, the compressional wave propagation mechanism in saturated soils is investigated by employing hydro-mechanically (HM) coupled analytical and numerical methods. A HM analytical solution for compressional wave propagation is first studied based on Biot’s theory, which shows the existence of two types of compressional waves (fast and slow waves) and indicates that their characteristics (i.e. wave dispersion and attenuation) are highly dependent on some key geotechnical and seismic parameters (i.e. the permeability, soil stiffness and loading frequency). The subsequent HM Finite Element (FE) study reproduces the duality of compressional waves and identifies the dominant permeability ranges for the existence of the two waves. In particular the existence of the slow compression wave is observed for a range of permeability and loading frequency that is relevant for geotechnical earthquake engineering applications. In order to account for the effects of soil permeability on compressional dynamic soil behaviour and soil properties (i.e. P-wave velocities and damping ratios), the coupled consolidation analysis is therefore recommended as the only tool capable of accurately simulating the dynamic response of geotechnical structures to vertical ground motion at intermediate transient states between undrained and drained conditions. 相似文献