首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 46 毫秒
1.
《Applied Geochemistry》2007,22(4):821-836
High-resolution sampling (every 3 h) of SPM was performed during a major flood event in a heterogeneous, medium scale watershed of the Garonne-Gironde fluvial-estuarine system (the Lot River; A = 10,700 km2; Q = 151 m3/s). Particulate metal and metalloid (Cd, Zn, Pb, Co, Cr, Ni, Mo, V, U, As, Sb, Th) concentrations were compared with monthly data of the same site (Temple site) obtained during 1999–2002. During the flood event, suspended particulate matter (SPM) concentrations closely followed river discharge with a maximum value (1530 mg/L) coinciding with the discharge peak (2970 m3/s). Trace metal/metalloid concentrations showed significant temporal variations and very contrasted responses. Particulate concentrations were similar to baseline values at the beginning of the flood and mostly increased during the event, showing anticlockwise and complex shape hystereses. Comparison of SPM yield (440,000 t) and particulate metal/metalloid fluxes during the flood with annual fluxes (1999–2002) highlights the great importance of major flood events in fluvial transport. Adequate sampling frequency during floods is necessary for reliable annual flux estimates and provides geochemical signals that may greatly improve our understanding of fluvial transport processes. The scenario of SPM and metal and metalloid transport during the flood are reconstructed by combining variations of Zn, Cd and Sb concentrations, concentration ratios (e.g. Zn/Cd, As/Th, Cd/Th) and hysteresis loops. Changes in SPM and metal/metalloid transport during distinct key stages of the flood were attributed to successive dominance of different water masses transporting material from different sources (e.g. industrial point source, bed sediment from reservoirs, plain erosion). Flood management (dam flushing) clearly enhanced the remobilization of up to 30-a old polluted sediment from reservoir lakes. Sediment remobilization accounted for ∼185,000 t of SPM (i.e. 42% of the total SPM fluxes during the flood) and strongly contributed to particulate metal/metalloid transport for Cd (90%), Zn (83%) and Pb (61%). Therefore, flood management needs to be taken into consideration in future models for erosion and pollutant transport.  相似文献   

2.
《Applied Geochemistry》2005,20(8):1533-1545
Spring waters were analysed in the field by anodic stripping voltammetry, using equipment which is sufficiently portable to be useful in a remote heavily forested area accessible by foot only. The equipment and techniques are capable of producing analyses on site to the μg/L level for labile metals. Field analysis avoids issues of sample storage and transport protocols that limit confidence in laboratory measurements of labile elements. Samples were taken as a feedback to immediate analysis resulting in a fine grid map of the geological site. Acid rock drainage emanates from a New Zealand historic mine site, with elevated concentrations of metals. However, ground water and surface water discharging naturally from mineralised rocks in the same area also have elevated levels of metals. This study quantifies natural metalliferous discharges from a single site, and compares this to the overall metal flux from the mine area. Acid (pH 3) metalliferous springs emanate from colluvium and bedrock in a young (months-old) landslide. Labile Cu, Pb, Zn and Cd are the environmentally most significant metals in the studied area. Labile metal concentrations observed in the natural springs are up to 24 μg/L Cu, up to 50 μg/L Pb, up to 5 μg/L Cd and up to 9 mg/L Zn. Labile Cu and Zn concentrations are similar to laboratory-determined total concentrations, whereas labile Pb and Cd concentrations are generally distinctly lower than total Pb and Cd concentrations. Four different spring water compositions occur within metres of each other: acid metalliferous water with high Pb, acid metalliferous water with low Pb, high Cu, Pb, Zn acid water and high pH water with elevated Cu. High metal concentrations in these waters are readily attenuated by adsorption to Fe oxyhydroxides (HFO), especially when rain raises spring water pH at the surface. Copper, Pb and Cd are >99% adsorbed, and Zn >95% adsorbed, during this rainfall dilution. Natural spring waters have potential to contribute up to 10% of the total Zn flux from the catchment, but negligible proportions of Cu, Pb and Cd.  相似文献   

3.
Heavy-metals (Cu, Pb and Zn) in tree-ring sequences of Prosopis juliflora, a tree species native to arid environments, were analyzed by ICP-MS. The tree-ring sequences were obtained from three specimens growing in an urban area previously reported as contaminated by the activity of a Cu smelter facility. The metal found in highest concentration in the wood was Zn, with concentrations up to 120 mg/kg and an enrichment factor up to 26; followed by Cu (up to 9.6 mg/kg, enrichment factor up to 8.6) and Pb (up to 1.4 mg/kg, enrichment factor up to 3). By assessing the correlation between different metal concentration trends, it was possible to infer two main pollution sources: vehicle traffic and Cu smelter emissions. Vehicle traffic is indicated by a correlation between Pb and Zn over time within individual trees, whereas contamination from the Cu-smelting facility is indicated by a correlation of Cu over time between trees. In tree A there was a significant within-tree correlation between Pb and Zn concentration trends (r = 0.856, P < 0.001), whereas Cu showed no correlation with the other metals. For tree B, there were no within-tree correlations between these metals, but when comparing the concentration–time trends between trees A and B, there was a significant correlation for Cu (r = 0.768, P < 0.01). The tree-ring sequence from tree C showed significant within-tree correlation for Cu:Zn (r = 0.430, P < 0.01) and for Pb:Zn (r = 0.753, P < 0.001). The highest enrichment values were found in tree A, located along the path of the growing-season dominant wind direction from the smelter facility, and not in the tree growing closer to the smelter (tree C), suggesting that the smelter’s emissions are dispersed to longer distances through the tall chimneys, attenuating the impact to the area directly closest to the smelter facility. It is concluded that Prosopis juliflora appears as a good bioindicator based on its metal accumulation capacity and lack of metal mobility among tree rings, thus providing information on the chronology and sources of heavy-metal pollution in urban and industrial areas.  相似文献   

4.
《Applied Geochemistry》2006,21(9):1593-1612
Sediments, mosses and algae, collected from lake catchments of the Larsemann Hills, East Antarctica, were analysed to establish baseline levels of trace metals (Ag, As, Cd, Co, Cr, Cu, Ni, Sb, Pb, Se, V and Zn), and to quantify the extent of trace metal pollution in the area. Both impacted and non-impacted sites were included in the study. Four different leaching solutions (1 M MgCl2, 1 M CH3COONH4, 1 M NH4NO3, and 0.3 N HCl) were tested on the fine fraction (<63 μm) of the sediments to extract the mobile fraction of trace metals derived from human impact and from weathering of basement lithologies. Results of these tests indicate that dilute HCl partly dissolves primary minerals present in the sediment, thus leading to an overestimate of the mobile trace metal fraction. Concentrations of trace metals released using the other 3 procedures indicate negligible levels of anthropogenic contribution to the trace metal budget. Data derived from this study and a thorough characterisation of the site allowed the authors to define natural baseline levels of trace metals in sediments, mosses and algae, and their spatial variability across the area. The results show that, with a few notable exceptions, human activities at the research stations have contributed negligible levels (lower than natural variability) of trace metals to the Larsemann Hills ecosystem. This study further demonstrates that anthropogenic sources of trace metals can be correctly identified and quantified only if natural baselines, their variability, and processes controlling the mobility of trace metals in the ecosystem, have been fully characterised.  相似文献   

5.
Active and abandoned mine activities constitute the sources of deterioration of water and soil quality in many parts of the world, particularly in the African Copperbelt regions. The accumulation in soils and the release of toxic substances into the aquatic ecosystem can lead to water resources pollution and may place aquatic organisms and human health at risk. In this study, the impact of past mining activity (i.e., abandoned mine) on aquatic ecosystems has been studied using ICP-MS analysis for trace metals and Rare Earth Elements (REE) in sediment samples from Lubumbashi River (RL) and Tshamilemba Canal (CT), Katanga, Democratic Republic of the Congo (DRC). Soil samples from surrounding CT were collected to evaluate trace metal and REE concentrations and their spatial distribution. The extent of trace metal contamination compared to the background area was assessed by Enrichment Factor (EF) and Geoaccumulation Index (Igeo). Additionally, the trace metal concentrations probable effect levels (PELs) for their potential environmental impact was achieved by comparing the trace metal concentrations in the sediment/soil samples with the Sediment Quality Guidelines (SQGs). Spearman's Rank-order correlation was used to identify the source and origin of contaminants. The results highlighted high concentrations of trace metals in surface sediments of CT reaching the values of 40152, 15586, 610, 10322, 60704 and 15152 mg kg−1 for Cu, Co, Zn, Pb, Fe and Mn, respectively. In the RL, the concentrations reached the values of 24093, 2046, 5463, 3340, 68290 and 769 mg kg−1 for Cu, Co, Zn, Pb, Fe and Mn, respectively. The ΣREE varied from 66 to 218 and 142–331 mg kg−1 for CT and RL, respectively. The soil samples are characterized by variable levels of trace metals. The EF analysis showed “extremely severe enrichment” for Cu and Co. However, no enrichment was observed for REE. Except for Mo, Th, U, Eu, Mo, Ho and Tm for which Igeo is classified as “moderately polluted and/or unpolluted”, all elements in different sites are classified in the class 6, “extremely polluted”. The trace metal concentrations in all sampling sites largely exceeded the SQGs and the PELs for the Protection of Aquatic Life recommendation. Cu and Co had positive correlation coefficient values (r = 0.741, P < 0.05, n = 14). This research presents useful tools for the evaluation of water contamination in abandoned and active mining areas.  相似文献   

6.
This study investigates the concentration and spatial distribution of Cu, Zn, Hg and Pb in the surface (0–2 cm) soils of a regional city in Australia. Surface soils were collected from road sides and analysed for their total Cu, Zn, Hg and Pb concentrations in the <180 μm and <2 mm grain size fractions. The average metal concentration of surface soils, relative to local background soils at 40–50 cm depth, are twice as enriched in Hg, more than three times enriched in Cu and Zn, and nearly six times as enriched in Pb. Median surface soil metal concentration values were Cu – 39 mg/kg (682 mg/kg max), Zn – 120 mg/kg (4950 mg/kg max), Hg – 44 μg/kg (14,900 μg/kg max) and Pb – 46 mg/kg (3490 mg/kg max). Five sites exceeded the Australian NEPC (1999) 300 mg/kg guideline for Pb in residential soils. Strong positive correlations between Cu, Zn and Pb, coupled with the spatial distribution of elevated soil concentrations towards the city centre and main roads suggest traffic and older housing as major sources of contamination. No spatial relationships were identified between elevated metal loadings and locations of past or present industries.  相似文献   

7.
Large volumes of coal fly ash are continually being produced and stockpiled around the world and can be a source of environmentally sensitive trace elements. Whilst leaching tests are used for regulatory purposes, these provide little information about the true geochemical behaviour and ‘reactivity’ of trace elements in coal ash because they are poorly selective. Isotope dilution (ID) assays are frequently used in soil geochemistry as a means of measuring the reactive pools of trace metals that are in equilibrium with soil pore waters. This paper examines the applicability of multi-element ID assays in measuring the labile or reactive pool of Cd, Pb and Zn in a range of fresh and weathered fly ash, where pH is generally much more alkaline than in soils. The method generally worked well using 0.0005 M EDTA as a background electrolyte as it provided robust analytical ICP-MS measurements as well as fulfilling the important principle of ID that non-labile metal should not be solubilised. Reactive pools were equivalent to 0.5–3% of the total Pb pool and 4–13% of the total Cd pool. For Zn, where samples had pH < 11.5, the reactive Zn pool varied between 0.3% and 2%; when fresh ash samples with pH > 11.5 were tested, the method failed as the spiked isotope appeared to be sorbed or precipitated. Ash weathering was found to exert little impact on the lability of Cd, Pb and Zn. Isotope dilution results were compared with 0.43 M HNO3 and 0.05 M EDTA extractions, these commonly being used as analogues of the ID assay, and concluded that these can be used as fast, cost-effective and simple proxies for the ID assays. Results suggest that ID methods can be used to enhance knowledge of trace element behaviour in fresh and weathered fly ash.  相似文献   

8.
This study was conducted to assess the anthropogenic impact on metal concentrations in the bottom sediments of the Juam reservoir, Korea, and in stream sediments in its catchment, and to estimate the potential mobility of selected metals (Fe, Mn, Cu, Ni, Pb and Zn) using sequential extraction. A comparison of the metal concentrations in the stream sediments with mean background values in sediments collected from first- or second-order creeks shows that Pb, Cu and Ni are the most affected by anthropogenic inputs. The 206Pb/207Pb ratios of the bottom and core sediments (means: 1.2320 ± 0.0502 and 1.2212 ± 0.0040, respectively) suggest that Pb contamination is mainly due to the waste discharge of abandoned coal and metal mines rather than industrial and airborne sources. Considering the proportion of metals bound to the exchangeable, carbonate and reducible fractions, the comparative mobility of metals is suggested to decrease in the order Mn > Pb > Zn > Ni > Fe ≫ Cu.  相似文献   

9.
The Weilasituo and Bairendaba Zn–Pb–Ag–Cu–(Sn–W) sulphide deposits are located in the southern part of Great Xing'an Range of Inner Mongolia in China. The deposits are located at shallow depths in the newly discovered Weilasituo porphyry hosting Sn–W–Rb mineralization. The mineralization at Weilasituo and Bairendaba consist of zoned massive sulphide veins within fractures cutting the Xilinhot Metamorphic Complex and quartz diorite. The Weilasituo deposit gradually zones from the Cu-rich Zn–Cu sulphide mineralization in the west to Zn-rich Zn–Cu sulphide mineralization in the east. The Bairendaba deposit has a Cu-bearing and Zn-rich core through a transitional zone devoid of copper to an outer zone of Zn–Pb–Ag mineralization. Three main veins contain more than 50 wt.% of the contained metal in the two deposits with their metal ratios displaying a systematic and gradual increase in Zn/Cu, Pb/Zn and Ag/Zn ratios from the western part of Weilasituo to the eastern part of Bairendaba.Three stages of vein-type mineralization are recognized. Early, sub-economic mineralization consists of a variable proportion of euhedral arsenopyrite, pyrite, quartz, and rare wolframite, scheelite, cassiterite, magnetite and cobaltite. This was succeeded by main stage mineralization with economic concentration of zoned Cu, Zn, Pb and Ag sulphide minerals along strike within the veins. The zones consist of the assemblages: (1) pyrrhotite–Fe-rich sphalerite–chalcopyrite(–quartz–fluorite) at west Weilasituo; (2) pyrrhotite–Fe-rich sphalerite–chalcopyrite(–galena–tetrahedrite–quartz–fluorite) at east Weilasituo; (3) pyrrhotite–Fe-rich sphalerite–chalcopyrite(–galena–tetrahedrite–quartz–fluorite) in the centre of Bairendaba; (4) pyrrhotite–Fe-rich sphalerite–galena(–chalcopyrite–tetrahedrite–quartz–fluorite) in the transition zone of Bairendaba; and (5) pyrrhotite–Fe-rich sphalerite–galena–tetrahedrite(–chalcopyrite–falkmanite–argentite–pyrargyrite–quartz–fluorite) in the outer zone at Bairendaba. Post-main ore stage is devoid of sulphides and characterized overprinting of fluorite, sericite, chlorite, illite, kaolinite and calcite.Zircon SHRIMP U–Pb dating, Zircon LA–ICP–MS U–Pb dating, molybdenite Re–Os isochron dating, and muscovite Ar–Ar dating indicate the Beidashan granitic batholith was intruded at 140 ± 3 Ma (MSWD = 3.3), the porphyritic monzogranite from marginal facies of the Beidashan batholith was intruded at 139 ± 2 Ma (MSWD = 0.75), the mineralized quartz porphyry was intruded at 135 ± 2 Ma (MSWD = 0.91), the greisen mineralization occurred at 135 ± 11 Ma (MSWD = 7.2), and the post-main ore stage muscovite deposited at 129.5 ± 0.9 Ma. The new geochronology data show the porphyry Sn–W–Rb and vein-type sulphide mineralization are contemporaneous with granitic magmatism in the region.The metal zonation at the Weilasituo and Bairendaba deposits is a result of progressive metal deposition. This was during the evolution of a metal-bearing fluid along the strike of the veins and during the main stage of ore formation at the upper part of the deep-seated porphyry Sn–W–Rb system. This progressive zonation indicates that the deposits represent end-numbers formed from one ore-forming fluid, which moved from west to east from the porphyry. The metal zonation patterns of the major veins are consistent with metal-bearing fluid entering the system with the precipitation of chalcopyrite proximally and sphalerite, galena and Ag-bearing minerals more distally. We show that the mechanism of metal deposition is therefore controlled by thermodynamic conditions resulting in the progressive separation of sulphides from the metal-bearing fluid. The temperature gradient between the inflow zone and the outflow zone appears to be one of the key parameters controlling the formation of the metal zonation pattern. The sulphide precipitation sequence is consistent with a low fS2 and low fO2 state of the acidic metal-bearing fluid. The metal zonation pattern provides helpful clues from which it is possible to establish the nature of fluid migration and metal deposition models to locate a possible porphyry mineralization at depth in the Great Xing'an Range, which is consistent with the geology of the newly discovered porphyry Sn–W–Rb system.  相似文献   

10.
The footwall volcanic rocks of the Ordovician Tanjianshan Group in the world-class Xitieshan Pb–Zn deposit have experienced prolonged arc volcanism followed by strong metamorphism and deformation. This has resulted in a complex thermal history and led to ambiguity in interpretation of zircon geochronological results. An integrated study involving textural characterization, CL imaging, trace element analysis, Ti-in-zircon thermometry and LA-ICPMS U–Pb dating has provided tight constraints on the age and genesis of the zircon groups in the volcanic rocks. The temperature of metamorphism and deformation indicated by metacryst minerals and micro-structures in the volcanic rocks ranges from 550 to 650 °C, which partially overlaps with the lower temperature range of zircon crystallization (600–750 °C) calculated using the Ti-in-zircon thermometer. Cathodoluminescence images and trace element compositions confirm a magmatic origin for the zircons, which have also been variably altered by metamorphic fluids. Two ranges of U–Pb ages, 475–470 Ma and 460–450 Ma, have been obtained on typical magmatic zircons and are interpreted to represent pre-mineralization arc volcanism in the Xitieshan deposit. A younger age group of 440–430 Ma for the fluid-modified zircons is considered to record post-ore metamorphism during the North Qadaim Orogeny. Thus, we propose that the original exhalative ores at the Xitieshan Pb–Zn deposit formed at 450–440 Ma.  相似文献   

11.
The Tianqiao Pb–Zn deposit in the western Yangtze Block, southwest China, is part of the Sichuan–Yunnan–Guizhou (SYG) Pb–Zn metallogenic province. Ore bodies are hosted in Devonian and Carboniferous carbonate rocks, structurally controlled by a thrust fault and anticline, and carried about 0.38 million tons Pb and Zn metals grading > 15% Pb + Zn. Both massive and disseminated Pb–Zn ores occur either as veinlets or disseminations in dolomitic rocks. They are composed of ore minerals, pyrite, sphalerite and galena, and gangue minerals, calcite and dolomite. δ34S values of sulfide minerals range from + 8.4 to + 14.4‰ and display a decreasing trend from pyrite, sphalerite to galena (δ34Spyrite > δ34Ssphalerite > δ34Sgalena). We interpret that reduced sulfur derived from sedimentary sulfate (gypsum and barite) of the host Devonian to Carboniferous carbonate rocks by thermal–chemical sulfate reduction (TSR). δ13CPDB and δ18OSMOW values of hydrothermal calcite range from –5.3 to –3.4‰ and + 14.9 to + 19.6‰, respectively, and fall in the field between mantle and marine carbonate rocks. They display a negative correlation, suggesting that CO2 in the hydrothermal fluid was a mixture origin of mantle, marine carbonate rocks and sedimentary organic matter. Sulfide minerals have homogeneous and low radiogenic Pb isotope compositions (206Pb/204Pb = 18.378 to 18.601, 207Pb/204Pb = 15.519 to 15.811 and 208Pb/204Pb = 38.666 to 39.571) that are plotted in the upper crust Pb evolution curve and overlap with that of Devonian to Carboniferous carbonate rocks and Proterozoic basement rocks in the SYG province. Pb isotope compositions suggest derivation of Pb metal from mixed sources. Sulfide minerals have 87Sr/86Sr ratios ranging from 0.7125 to 0.7167, higher than Sinian to Permian sedimentary rocks and Permian Emeishan flood basalts, but lower than basement rocks. Again, Sr isotope compositions are supportive of a mixture origin of Sr. They have an Rb–Sr isotopic age of 191.9 ± 6.9Ma, possibly reflecting the timing of Pb–Zn mineralization. C–O–S–Pb–Sr isotope compositions of the Tianqiao Pb–Zn deposit indicate a mixed origin of ore-forming fluids, which have Pb–Sr isotope homogenized before the mineralization. The Permian flood basalts acted as an impermeable layer for the Pb–Zn mineralization hosted in the Devonian–Carboniferous carbonate rocks.  相似文献   

12.
《Applied Geochemistry》2006,21(9):1613-1624
Ingestion of soil is a common behaviour in young children as a means of exploring their surroundings. Much attention has been given to remediation of point-source polluted sites with regard to potential health risks for children. However, because of diffuse pollution and long-range atmospheric deposition, soil contaminant levels are generally increased in urban areas compared to their rural counterparts, even in areas located away from any point sources of pollution. Intake of urban soil can thereby result in significant amounts of the child’s daily metal intake. In the present study, soil samples were collected from 25 playgrounds around urban Uppsala, Sweden and analysed for contents of Al, As, Fe, Cr, Cu, Cd, Hg, Mn, Ni, Pb, W and Zn. Prior to aqua regia digestion, the samples were wet-sieved in order to separate soil particle fractions representing deliberate (<4 mm) and involuntary (<50 μm) soil ingestion by children, as well as a third size fraction of 50–100 μm representing soil that is easily transported by suspension. While the metal and As contents in the 50–100 μm fraction were similar to those of the <4 mm fraction, the <50 μm fraction had metal and As contents on average one and a half times higher than those of the <4 mm fraction. The metal and As contents correlated negatively with the sand content in both particle size fractions <4 mm and 50–100 μm, suggesting a general decrease in metal and As content with increasing sand content. However, a positive correlation was found between sand content and the metal and As contents of the finest fraction (<50 μm), suggesting that when the sand content is high, the bulk of the sorbed elements are on the finest particles. The difference between metal and As contents in the different size fractions was greater in the soil sample with the highest sand content than in the sample with the lowest sand content. This implies that texture is a significant factor in metal and As distribution in soils with moderate metal and As contents, when the number of binding sites associated with small particles is low. Tolerable daily intake (TDI) values for Pb and As were exceeded at all sites, and at two sites for Cd, for children with pica behaviour. A high ingestion rate of mainly small particles could also result in the TDI value for Pb being exceeded at 10 sites and that for As at one site. This study also found that soil analysis by the procedure recommended by Swedish authorities accurately represents the metal intake from deliberate soil ingestion, whereas involuntary soil ingestion of mainly small particles could result in metal intakes which are up to twice as high.  相似文献   

13.
The recently discovered polymetallic Shazigou Mo–W–Pb–Zn ore field is located at the northern margin of the North China Craton. This integrated metallogenic system is comprised of quartz vein mineralization in three deposits: Shazigou Mo–W, Jindouzishan Pb–Zn and Mantougou Pb–Zn. The total reserves are estimated to be 50 kt Mo, 626 t WO3, 244 kt Pb and 150 kt Zn. Molybdenite Re–Os dating of five quartz vein-type ores yielded a mean model age of 243.8 ± 1.6 Ma (MSWD = 0.81) and hydrothermal zircons yielded a concordant U–Pb age of 245 ± 2.6 Ma (MSWD = 0.65). These results suggest that the mineralization was formed in the early Triassic and could be related to Paleo-Asian Ocean subduction. Microthermometry and quartz fluid inclusion compositions indicate that fluids related to the Mo–W mineralization were mainly derived from magmatic sources and precipitated under relatively high temperature (280–340 °C) and salinity conditions (6–9 wt% NaCl equiv.), whereas subsequent Pb–Zn mineralization-related fluids may have been modified by metamorphic and meteoric waters. The discovery of the Shazigou ore field suggests conditions may be favourable for more extensive mineralization in the western Xilamulun Mo metallogenic belt at the northern margin of the North China Craton.  相似文献   

14.
The northeastern Gangdese Pb–Zn–Ag–Fe–Mo–W polymetallic belt (NGPB), characterized by skarn and porphyry deposits, is one of the most important metallogenic belts in the Himalaya–Tibetan continental orogenic system. This belt extends for nearly four hundred kilometers along the Luobadui–Milashan Fault in the central Lhasa subterrane, and contains more than 10 large ore deposits with high potential for development. Three major types of mineralization system have been identified: skarn Fe systems, skarn/breccia Pb–Zn–Ag systems, and porphyry/skarn Mo–Cu–W systems. In this study, we conducted a whole-rock geochemical, U–Pb zircon geochronological, and in situ zircon Hf isotopic study of ore-forming rocks in the NGPB, specifically the Jiangga, Jiaduopule, and Rema skarn Fe deposits, and the Yaguila Pb–Zn–Ag deposit. Although some of these deposits (porphyry Mo systems) formed during the post-collisional stage (21–14 Ma), the majority (these three systems) developed during the main (‘soft collision’) stage of the India–Asia continental collision (65–50 Ma). The skarn Fe deposits are commonly associated with granodiorites, monzogranites, and granites, and formed between 65 and 50 Ma. The ore-forming intrusions of the Pb–Zn–Ag deposits are characterized by granite, quartz porphyry, and granite porphyry, which developed in the interval of 65–55 Ma. The ore-forming porphyries in the Sharang Mo deposit, formed at 53 Ma. The rocks from Fe deposits are metaluminous, and have relatively lower SiO2, and higher CaO, MgO, FeO contents than the intrusions associated with Mo and Pb–Zn–Ag mineralization, while the Pb–Zn–Ag deposits are peraluminous, and have high SiO2 and high total alkali concentrations. They all exhibit moderately fractionated REE patterns characterized by lower contents of heavy REE relative to light REE, and they are enriched in large-ion lithophile elements and relatively depleted in high-field-strength elements. Ore-forming granites from Fe deposits display 87Sr/86Sr(i) = 0.7054–0.7074 and εNd(t) = − 4.7 to + 1.3, whereas rocks from the Yaguila Pb–Zn–Ag deposit have 87Sr/86Sr(i) = 0.7266–0.7281 and εNd(t) = − 13.5 to − 13.3. In situ Lu–Hf isotopic analyses of zircons from Fe deposits show that εHf(t) values range from − 7.3 to + 6.6, with TDM(Hf)C model ages of 712 to 1589 Ma, and Yaguila Pb–Zn–Ag deposit has εHf(t) values from − 13.9 to − 1.3 with TDM(Hf)C model ages of 1216 to 2016 Ma. Combined with existing data from the Sharang Mo deposit, we conclude that the ore-forming intrusions associated with the skarn Fe and porphyry Mo deposits were derived from partial melting of metasomatized lithospheric mantle and rejuvenated lower crust beneath the central Lhasa subterrane, respectively. Melting of the ancient continental material was critical for the development of the Pb–Zn–Ag system. Therefore, it is likely that the source rocks play an important role in determining the metal endowment of intrusions formed during the initial stage of the India–Asia continental collision.  相似文献   

15.
《Applied Geochemistry》1998,13(3):359-368
Studies on the speciation (particulate, colloidal, anionic and cationic forms) of trace metals (Cd, Co, Cu, Fe, Mn, Mo, Ni, Pb, Zn) in the water column and in pore waters of the Gotland Deep following the 1993/94 salt-water inflows showed dramatic changes in the total “dissolved” metal concentrations and in the ratios between different metal species in the freshly re-oxygenated waters below 125 m. Changes in concentrations were greatest for those metals for which the solubility differs with the redox state (Fe, Mn, Co) but were also noted for those metals which form insoluble sulphides (Cd, Pb, Cu, Zn) and/or stable complexes with natural ligands (Cu). Pore water data from segmented surface muds (0–200 mm) indicated that significant redox and related metal speciation changes took place in the surface sediments only a few weeks after the inflow of the oxygenated sea water into the Gotland Deep.  相似文献   

16.
The Keketale Pb–Zn deposit is located in the Devonian volcanic-sedimentary Maizi basin of the Altay orogenic belt. The mineralization at Keketale is hosted in marbles and deformed volcanic tuffs and biotite–garnet–chlorite schists, folded into a series of overturned synclines formed in multiple deformation events. Keketale contains economic amounts of Pb (0.89 Mt @ 1.51 wt.%), Zn (1.94 Mt @ 3.16 wt.%) and Ag (650 t @ 40 g/t).Detailed petrographic studies have defined two main generations of sulfide development. The banded pyrite of the early Stage A is commonly stratiform, with minor galena, sphalerite and chalcopyrite. Stage B is characterized by a large amount of polymetallic sulfides including pyrrhotite, chalcopyrite, sphalerite and galena, with minor pyrite hosted in quartz veins.Three types of fluid inclusions (FIs), including mixed carbonic-aqueous (C-type), pure carbonic (PC-type) and aqueous (W-type), have been recognized in quartz of stage B. The C-type FIs have homogenization temperatures of 150–326 °C and salinities of 0.2–16.6 wt.% NaCl equivalent. The PC-type FIs are dominated by CO2 with minor CH4 and N2 and have initial ice-melting temperatures of − 57.5 to − 56.7 °C, CO2 homogenization temperatures of 11–14.1 °C. The W-type primary FIs were completely homogenized at temperatures of 124–359 °C with salinities of 5.0–14.6 wt.% NaCl equivalent. Such CO2-rich fluid inclusions are consistent with those discovered in orogenic-type deposits in the Altay area and elsewhere.Muscovite separates from the polymetallic quartz veinlets of stage B yield a well-defined 40Ar/39Ar isotopic plateau age of 259.33 ± 2.56 Ma, with an isochron age of 259.62 ± 2.65 Ma. This age is coeval with the closure of the Paleo-Asia Ocean and reactivation of the Ertix Fault system.LA-ICP-MS analyses of two generations of pyrite indicate that the banded pyrite of stage A is relatively depleted in metallic elements and contains low contents of Cu (0.39 ppm), Ag (0.20 ppm), Au (below the detection limits), Pb (17.43 ppm) and Zn (14.38 ppm); whereas the pyrite in quartz–polymetallic sulfide veinlets of the stage B is relatively rich in metallic elements, e.g., Cu (2.56 ppm), Ag (3.07 ppm), Au (0.01 ppm), Pb (1047 ppm) and Zn (1136 ppm). The trace amounts of Cu, Pb, Zn, Au and Ag are interpreted to have been initially locked in the lattice of type-A pyrite, and then liberated and precipitated as micromineral inclusions with type-B pyrite during subsequent metamorphism and deformation.Two key factors are considered vital to the formation of economic ores of the Keketale Pb–Zn deposit, namely the original Devonian banded pyrite formed in a VMS system and subsequent Permian deformation and metamorphic processes that liberated Cu, Pb, Zn, Au and Ag from the lattice of type-A pyrite to form galena, sphalerite and chalcopyrite with minor muscovite in quartz veinlets. The model provides a new interpretation of VMS Pb–Zn deposit occurring in back-arc basin environments followed by collision, and new insights into the unique regional Fe–Cu–Pb–Zn–Au mineralization in the Altay orogenic belt.  相似文献   

17.
The current study was designed to investigate the extent and severity of contamination as well as the fractionation of potentially toxic elements (As, Cd, Cr, Cu, Pb, Zn, Ni) in minesoils and agricultural soils around a Pb–Zn mine in central Iran. For this purpose, 20 agricultural soils and eight minesoils were geochemically characterized. Results showed that minesoils contained elevated concentrations of As (12.9–254 mg kg−1), Cd (1.2–55.1 mg kg−1), Pb (137–6239 mg kg−1) and Zn (516–48,889 mg kg−1). The agricultural soils were also polluted by As (5.5–57.1 mg kg−1), Cd (0.2–8.5 mg kg−1), Pb (22–3451 mg kg−1) and Zn (94–9907 mg kg−1). The highest recorded concentrations for these elements were in soils influenced directly by tailing ponds. Chromium, Cu and Ni content in agricultural soils (with average value of 74.1, 34.6 and 50.7 mg kg−1, respectively) were slightly higher than the minesoils (with average value of 54.5, 33.1 and 43.4 mg kg−1, respectively). Sequential extraction data indicated that there were some differences between the speciation of PTEs in soil samples. In the agricultural soils, Zn and Cd were mainly associated with carbonate bound fraction, As and Pb with reducible fraction, Cu with oxidisable fraction and Cr and Ni with residual phase. With respect to mobility factor values, Zn and Cd in the agricultural soils have been found to be the most mobile while As mobility is negligible. Also, the mobility factor of As, Cd and Pb in agricultural soils adjoining tailing ponds was high. In minesoil sample Cd was most abundant in the carbonate form, whereas other studied elements were mainly present in the reducible and residual fractions; therefore, despite the high total concentrations of As, Pb and Zn in the minesoils, the environmental risk of these elements was low. Based on the obtained data, a portion of Cu, Cr and Ni input was from agricultural activities.  相似文献   

18.
Mississippi Valley type (MVT) Pb–Zn deposits can occur in orogenic thrust belts. However, the relationship between MVT ore-forming processes and thrusting is unclear. The 1500-km-long Sanjiang Metallogenic Belt in Tibetan Plateau is an important thrust-controlled MVT ore province with 860 Mt at 0.76–2.3% Pb, 0.3–6.1% Zn. The Zhaofayong MVT ore cluster in the Changdu area is a typical sample. The orebodies in this ore cluster are hosted in limestone, controlled by secondary faults to regional thrusts and forming along these faults. Two Pb–Zn mineralization stages in this cluster are recognized. Stage I is characterized by coarse and euhedral galena + sphalerite + calcite + fluorite + barite and Stage II by fine grained sphalerite + galena + pyrite + calcite. Sm–Nd isotopic dating of calcite forming in Stage I yields isochron ages of 41.1–38.1 Ma, suggesting the mineralization formed during extension following the first regional compression in the Changdu area. The connection between Stage I mineralization and the regional thrusting in the Changdu area can extend to the whole Sanjiang belt. Two stages of regional Pb–Zn mineralization are recognized between 65 Ma and 30 Ma and between 30 Ma and 16 Ma in the belt. The two Pb–Zn mineralization stages are consistent with those regional episodic thrusting activities and both of them immediately occurred after the episodic thrusting. An interpretation of the regional Pb–Zn mineralization is that regional compression forced the movement of hydrothermal fluids along regional thrust-nappe detachment faults and subsequent post-thrust extension caused the migration of hydrothermal fluids to the ore forming locations. The two mineralization stages in the Sanjiang Belt indicate complex processes related to India–Eurasia collision and the gradually younger mineralization ages from southeast to northwest indicate the collision follows the same direction.  相似文献   

19.
The Lanping basin is a significant Pb–Zn–Cu–Ag mineralization belt of the Sanjiang Tethyan metallogenic province in China. Over 100 thrust-controlled, sediment-hosted, Himalayan base metal deposits have been discovered in this basin, including the largest sandstone-hosted Pb–Zn deposit in the world (Jinding), and several Cu ± Ag ± Co deposits (Baiyangping, Baiyangchang and Jinman). These deposits, with total reserves of over 16.0 Mt Pb + Zn, 0.6 Mt Cu, and 7000 t Ag, are mainly hosted in Meso-Cenozoic mottled clastic rocks, and strictly controlled by two Cenozoic thrust systems developed in the western and eastern segments of the Lanping basin.To define the metallogenic history of the study area, we dated nine calcite samples associated with copper sulfides from the Jinman Cu deposit by the Sm–Nd method and five molybdenite samples from the Liancheng Cu–Mo deposit by the Re–Os method. The calcite Sm–Nd age for the Jinman deposit (58 ± 5 Ma) and the molybdenite Re–Os age for the Liancheng deposit (48 ± 2 Ma), together with previously published chronological data, demonstrate (1) the Cu–Ag mineralization in the western Lanping basin mainly occurred in three episodes (i.e., ∼56–54, 51–48, and 31–29 Ma), corresponding to the main- and late-collisional stages of the Indo–Asian orogeny; and (2) the Pb–Zn–Ag (±Cu) mineralization in the eastern Lanping basin lacked precise and direct dating, however, the apatite fission track ages of several representative deposits (21 ± 4 Ma to 32 ± 5 Ma) may offer some constraints on the mineralization age.  相似文献   

20.
The Huangshaping polymetallic deposit is located in southeastern Hunan Province, China. It is a world-class W–Mo–Pb–Zn–Cu skarn deposit in the Nanling Range Metallogenic Belt, with estimated reserves of 74.31 Mt of W–Mo ore at 0.28% WO3 and 0.07% Mo, 22.43 Mt of Pb–Zn ore at 3.6% Pb and 8.00% Zn, and 20.35 Mt of Cu ore at 1.12% Cu. The ore district is predominantly underlained by carbonate formations of the Lower Carboniferous period, with stocks of quartz porphyry, granite porphyry, and granophyre. Skarns occurred in contact zones between stocks and their carbonate wall rocks, which are spatially associated with the above-mentioned three types of ores (i.e., W–Mo, Pb–Zn, and Cu ores).Three types of fluid inclusions have been identified in the ores of the Huangshaping deposit: aqueous liquid–vapor inclusions (Type I), daughter-mineral-bearing aqueous inclusions (Type II), and H2O–CO2 inclusions (Type III). Systematic microthermometrical, laser Raman spectroscopic, and salinity analyses indicate that high-temperature and high-salinity immiscible magmatic fluid is responsible for the W–Mo mineralization, whereas low-temperature and low-salinity magmatic-meteoric mixed fluid is responsible for the subsequent Pb–Zn mineralization. Another magmatic fluid derived from deep-rooted magma is responsible for Cu mineralization.Chondrite-normalized rare earth element patterns and trace element features of calcites from W–Mo, Pb–Zn, and Cu ores are different from one another. Calcite from Cu ores is rich in heavy rare earth elements (187.4–190.5 ppm), Na (0.17%–0.19%), Bi (1.96–64.60 ppm), Y (113–135 ppm), and As (9.1–29.7 ppm), whereas calcite from W–Mo and Pb–Zn ores is rich in Mn (> 10.000 ppm) and Sr (178–248 ppm) with higher Sr/Y ratios (53.94–72.94). δ18O values also differ between W–Mo/Pb–Zn ores (δ18O = 8.10‰–8.41‰) and Cu ores (δ18O = 4.34‰–4.96‰), indicating that two sources of fluids were, respectively, involved in the W–Mo, Pb–Zn, and Cu mineralization.Sulfur isotopes from sulfides also reveal that the large variation (4‰–19‰) within the Huangshaping deposit is likely due to a magmatic sulfur source with a contribution of reduced sulfate sulfur host in the Carboniferous limestone/dolomite and more magmatic sulfur involved in the Cu mineralization than that in W–Mo and Pb–Zn mineralization. The lead isotopic data for sulfide (galena: 206Pb/204Pb = 18.48–19.19, 207/204Pb = 15.45–15.91, 208/204Pb = 38.95–39.78; sphalerite: 206Pb/204Pb = 18.54–19.03, 207/204Pb = 15.60–16.28, 208/204Pb = 38.62–40.27; molybdenite: 206Pb/204Pb = 18.45–19.21, 207/204Pb = 15.53–15.95, 208/204Pb = 38.77–39.58 chalcopyrite: 206Pb/204Pb = 18.67–19.38, 207/204Pb = 15.76–19.90, and 208/204Pb = 39.13–39.56) and oxide (scheelite: 206Pb/204Pb = 18.57–19.46, 207/204Pb = 15.71–15.77, 208/204Pb = 38.95–39.13) are different from those of the wall rock limestone (206Pb/204Pb = 18.34–18.60, 207/204Pb = 15.49–15.69, 208/204Pb = 38.57–38.88) and porphyries (206Pb/204Pb = 17.88–18.66, 207/204Pb = 15.59–15.69, 208/204Pb = 38.22–38.83), suggesting Pb206-, U238-, and Th 232-rich material are involved in the mineralization. The Sm–Nd isotopes of scheelite (εNd(t) = − 6.1 to − 2.9), garnet (εNd(t) = − 6.8 to − 6.1), and calcite (εNd(t) = − 6.3) from W–Mo ores as well as calcite (εNd(t) = − 5.4 to − 5.3) and scheelite (εNd(t) = − 2.9) from the Cu ores demonstrate suggest more mantle-derived materials involved in the Cu mineralization.In the present study we conclude that two sources of ore-forming fluids were involved in production of the Huangshaping W–Mo–Pb–Zn–Cu deposit. One is associated with the granite porphyry magmas responsible for the W–Mo and then Pb–Zn mineralization during which its fluid evolved from magmatic immiscible to a magmatic–meteoritic mixing, and the other is derived from deep-rooted magma, which is related to Cu-related mineralization.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号