共查询到20条相似文献，搜索用时 125 毫秒
1.
鄂西北山区降雨型边坡失稳模式和评价方法 总被引：2，自引：1，他引：1
2003年6月的一次连续降雨诱发了鄂西北山区郧漫公路沿线多处边坡失稳。根据边坡岩土体的组成和结构特征,总结出了5种典型的暴雨型边坡失稳模式:浅层堆积体滑移、含软弱面顺层滑移、切层边坡水压劈裂破坏、碎裂岩似弧形追踪破坏和块裂岩楔体滑移。根据边坡破坏特点和降雨作用形式提出了相应的评价方法,认为浅层堆积体在暴雨下含水量,即85%~100%液限含水量时易发生滑移,通过平面无限斜坡评价法计算边坡稳定性;含软弱面顺层边坡及块裂楔形体均为剪切滑移失稳,采用简化的刚体极限平衡法计算其稳定性;切层边坡中陡倾裂缝经历了卸荷张开－水压开裂－贯通破坏的过程,通过Ⅰ型裂缝扩展判据评价边坡稳定性;碎裂岩边坡发生类似弧形滑移的追踪破坏,采用连续介质圆弧法计算边坡稳定性。 相似文献
2.
基于国内外研究现状和岩质滑坡案例,总结出岩质滑坡的水力致灾机制,归纳考虑水力作用下的岩质斜坡主要失稳破坏模式,评述了岩质斜坡稳定性分析方法。岩质滑坡的水力致灾机制主要由于水对滑体产生的静水压力（岩体侧面的推力、滑面的扬压力和岩体的浮力）和动水压力（向坡外的渗透力）作用。从渗流—应力耦合的角度可较全面评价水渗流对坡体稳定性的影响。斜坡的岩体结构决定了水力作用方式和坡体的失稳破坏形式,考虑水力作用下的岩质斜坡失稳破坏形式主要有:顺层滑动、平推式滑动、楔形体滑移和危岩的崩塌。对于水力作用下岩质斜坡的稳定性分析方法主要有极限平衡法、有限元强度折减法、基于断裂力学的危岩稳定性分析法和渗流—应力耦合模型分析法,其中前两种方法应用较为广泛。 相似文献
3.
Kripamoy Sarkar Ashok Kumar Singh Anurag Niyogi Prasanta Kumar Behera A. K. Verma T. N. Singh 《Journal of the Geological Society of India》2016,88(3):387-393
The present paper demonstrates the assessment of slope stability analysis between Rampur to Jhakri road section along National Highway (NH-22), Himachal Pradesh, India. The different types of slope failures have affected most part of slopes which causes considerable loss of life and property, inconveniences such as disruption of traffic along highways. The poorly designed rock slopes for road widening or construction purposes may weaken the stability of the slopes. A detail field investigation has been carried out to collect the representative rock samples for determination of physico-mechanical properties of rock and joint data for kinematic analysis. The rocks exposed in the area are highly jointed quartzite and quartz-mica schist of Rampur-Larji Group of Palaeoproterozoic age. The continuous slope mass rating (CSMR) technique has been applied for the assessment of slope stability analysis at five vulnerable locations and the results shows slopes are partially stable to unstable. Kinematic analysis mainly shows wedge type of failure along with few toppling and planar failures. The existing slope required immediate treatment to prevent the failure for its long term stability. 相似文献
4.
基于地下岩体受节理面的控制,节理面的几何和力学参数随机分布,从而导致岩体系统具有高度不确定性,提出以关键块体理论为基础,考虑节理几何和力学参数随机性的岩体开挖可靠度分析方法,并给出了块体稳定的总失效概率评价模型。以澳大利亚阿德莱德地区一铜矿地质条件为例,以节理面倾角、倾向、摩擦系数和黏聚力为随机变量,通过Monte Carlo模拟和概率图方法,进行了岩体可靠度和失效概率的计算。最后,采用条件概率的分析方法,计算了单面滑动块体的总失效概率。计算结果表明,块体沿单面滑动并且出现的概率为11.0%,总的失效概率为3.85%,超过一般岩体工程可允许的风险水平,认为该方法可以作为评价块体可靠性的依据。 相似文献
5.
Influence of discontinuities and clay minerals in their filling materials on the instability of rock slopes 总被引：1，自引：0，他引：1
Davood Fereidooni 《Geomechanics and Geoengineering》2018,13(1):11-21
To assess the influence of discontinuities and clay minerals in their filling materials on the instability of rock slopes, seven rock slopes along the margin of Ganjnameh–Shahrestaneh Road, Hamedan Province, Western Iran were selected, and the physical and mechanical properties of their rocks and discontinuities were determined. By statistical studies of the discontinuities, rock slope stability analysis has been performed using kinematic and limit equilibrium methods so that safety factors for the rock slopes can be calculated. Also, sampling of filling materials and X-ray diffraction tests have been done to identify the clay minerals in the filling materials. The lithologies of the studied rock slopes are granite, diorite and hornfels. The presence of discontinuities and weakness planes with different orientations and clay minerals in filling materials of discontinuities are effective factors that cause plane, wedge and toppling failures in the rock slopes. Clay minerals as filling materials of discontinuities in the studied rock slope facilitate their instability by two different methods. First, absorption of water by infilling clay minerals causes the friction angle of discontinuity surfaces that leads to plane and wedge failures to be reduced. Second, water absorption causes the swelling of clay infilling minerals that leads to toppling failure. 相似文献
6.
Summary ?The stability of slopes during and after excavation is always of great concern in the field of rock engineering. One of the
structurally controlled modes of failure in jointed rock slopes is wedge failure. The limiting equilibrium methods for slopes
under various conditions against wedge failure have been previously proposed by several investigators. However, these methods
do not involve dynamic assessments and have not yet been validated by experimental results. In this paper, the tests performed
on model wedges under static and dynamic loading conditions are described and the existing limiting equilibrium methods are
extended to take into account dynamic effects. The applicability and validity of the presented method are checked through
model tests carried out under well controlled conditions and by actual cases studied by the authors, both in Turkey and Japan. 相似文献
7.
巴东组岩石能量耗散规律的实验研究 总被引：1，自引：0，他引：1
岩石变形和破坏可以看作能量耗散和释放的过程,基于巴东县城西壤坡库岸巴东组岩石压缩实验数据,利用岩石能量学分析理论,分析了巴东组岩石能量的耗散规律,并探讨了巴东组岩石的破坏模式和库岸斜坡失稳机制。结果表明:(1)压缩试验得到了4类破坏模式,其中楔形剪-张破坏模式的平均能耗最大、沿弱面剪切破坏的能耗最小; (2)峰值前外荷输入能(E1)、峰值前岩块损伤能(ED)及单位长度裂纹耗能率均表明,巴东组岩石在垂向上硬度不均。在构造作用下,岩体内部广泛发育顺层滑脱带; (3)硬度高的岩石常表现为脆性破坏,破裂时能量耗散速度快。硬质岩斜坡在破坏前所集聚的弹性能,远大于破坏时所需的破裂能,易发生剧烈滑动; (4)在矿物成分变化处,巴东组岩石能量分析的各项指标表现出明显的波动,灰质高的岩石强度相对于黏土质高者的强度大。研究成果对于解释巴东组岩石强度特征和巴东城区内滑坡的失稳模式具有参考意义。 相似文献
8.
9.
倾倒变形常见于反倾结构边坡,特别在具有软硬互层结构边坡中,甚至可发育为深度上百米的大型滑坡。为进一步探明此类反倾边坡倾倒变形的破坏机制,以及边坡形态结构及岩体力学参数等因素的影响规律,以离心模型试验为原型,结合离散元数值模拟,分析了倾倒变形的形成过程以及在外界扰动下的破坏机制。并通过单因素分析法、正交设计法等,研究了多种因素对反倾边坡倾例变形的影响,通过极差分析获得了各因素的敏感性。通过在岩层内预置大量多边形随机裂隙,数值模拟较好地实现了对破裂面起裂及延展规律的模拟。结果表明:离心模型试验可较好地还原倾倒变形过程,而离散元数值模拟则可对实验结果进行有效的重现与扩展,两者吻合度良好;岩体变形过程存在3个阶段,即起始变形、稳态变形和失稳破坏等阶段;破裂面呈弧形,在变形积累到一定程度后快速形成;边坡可自下而上形成多级破裂面,并伴随岩层的强烈弯曲变形,在外界扰动下,倾倒变形体将由外到内沿不同破裂面形成渐进后退式破坏;多种影响因素中,边坡形态结构影响最大,层面参数次之,软硬岩岩石力学参数的差异影响较小;具体而言,边坡形态与坡体结构对倾倒变形的影响性大小表现为坡角＞倾角＞坡高＞坡形＞层厚比＞层厚,坡角、倾角、坡高越大,坡形越外凸,软硬岩层厚差越小,倾倒变形越容易发生;边坡变形规模主要受形态结构因素控制,倾角和坡角影响最显著。 相似文献
10.
强震作用下顺层岩质斜坡动力失稳机制及启动速度研究 总被引：1，自引：0，他引：1
岩质斜坡地震稳定性评价和地震滑坡启动速度计算是边坡地震失稳防治中的难点。结合5•12四川汶川地震诱发的大型高速滑坡,重点以唐家山高速滑坡为例,提出强震作用下中陡倾顺层岩质斜坡动力失稳机制为拉裂－楔劈－滑移－剪断,并着重阐述了拉裂面形成机制、“楔劈”岩块的杠杆作用和碎屑岩块的滚动摩擦效应。对应于该失稳模式,采用弹性力学理论,推导出地震作用下顺层岩体斜坡锁固段的破坏判据和突发剪断时锁固段岩体的形变能公式。考虑锁固段岩体形变能释放的优势方向,运用能量转化原理,给出了更为合理和精确的顺层岩质滑坡突发启动速度公式,进而确定滑坡启程速度。其研究结果为滑坡灾害范围和冲击损害程度提供有效定量计算方法。 相似文献
11.
四川某水库大坝左坝肩边坡变形破坏机制及整治对策探讨 总被引：8，自引：0，他引：8
王士天 《地质灾害与环境保护》1999,10(3):1-5
以现场考察和变形监测资料为依据,探讨一个下部有软弱基底,上部为硬脆性坡体的“二元结构”边坡的变形破坏问题,揭示这类边坡的变形总是以下部软弱岩体的不均匀压缩流变为先导,进而引起上部硬脆性坡体的拉裂与倾倒,最终通过渗入水的作用,使下部承载状况已进一步恶化了的软弱岩体,沿剪应力集中带发生剪切破坏而导致整个变形坡体的下滑。 相似文献
12.
A. Malarvizhi Achyuthan Hema D. Gobichandhru 《Journal of the Geological Society of India》2016,87(3):317-322
Occurrences of landslide are most common and critical issue in North-East India. The various types of slope failures have been affected most part of slopes and road section between Malidor to Sonapur area (approx 30 Km) along NH-44 within Jaintia hills district, Meghalaya, India. These slope failures causes considerable loss of life and property along with many inconveniences such as disruption of traffic along highways. The unscientific excavations of rock slopes for road widening or construction purposes may weaken the stability of the slopes. The rocks exposed in the area are highly jointed sandstone and shale of Barail Group of Oligocene age. The Sonapur landslide is most dangerous and destructive rock fall-cum debris flow. The present study includes the kinematic analysis of the slope to assess the potential failure directions as the rocks are highly jointed in some parts of road cut sections. The continuous slope mass rating (CSMR) technique has been applied for slope stability analysis at five vulnerable locations. Kinematic analysis indicates mainly wedge type of failure along with few toppling and planar failures. These failure required immediate treatment to prevent the slide and long term stability of the slope. 相似文献
13.
K. Ma C. A. Tang L. C. Li P. G. Ranjith M. Cai N. W. Xu 《Arabian Journal of Geosciences》2013,6(6):2147-2163
Little has been published on the three-dimensional (3D) simulation of the progressive failure of rock slopes, possibly because the process of failure involves a complex, nonlinear evolution from initiation, through propagation and crack. In addition, rock is typically anisotropic, which makes it difficult to identify and describe the slope constituents and failure processes accurately. Despite such difficulties, further study of the fracture process is just as important as analyzing stress fields in 3D rock slope failures. In this paper, the 3D realistic failure process analysis code using finite element programming, and an extended version of numerical centrifugal method, is used to simulate slopes failure with different dip angles. The numerical centrifugal analysis results in this paper are found that the critical failure surface develops along the weak structural surface when the slope dip angle β is below 30°; conversely, the failure surface is formed along the toe of circular sliding when β is above 30°. In addition, it is also found that whether or not including the irregularity of joint into modeling to analyze the 3D slope stability problem will lead to a significant difference in factors of safety, it can reach 8.41 % at the same slope angle. Furthermore, the acoustic emission analyzing reveals deformed location characters of rock slope during the failure processes. With such capabilities, the approach contributes significantly to the in-depth study of the mechanisms of rock slope instability process. 相似文献
14.
岩体中普遍存在着断层﹑节理和裂隙等结构面,这些结构面的存在和发展对岩体的整体强度﹑变形及稳定性有极大的影响。因此,研究岩体中原生结构面的萌生﹑发展以及贯通演化过程对评估岩体工程安全性和可靠性具有非常重要的理论与现实意义。扩展有限元法（XFEM）作为一种求解不连续问题的有效数值方法,模拟裂隙时独立于网格,因此,在模拟岩体裂隙扩展﹑水力劈裂等方面具有独特优势。针对扩展有限元法的基本理论及其在岩体裂隙扩展模拟中的应用展开了研究,建立了扩展有限元法求解岩体裂隙摩擦接触、岩体裂隙破坏等问题的数值模型,并将计算模型应用于岩质边坡稳定性分析和重力坝坝基断裂破坏等工程问题。 相似文献
15.
The susceptibility of slopes in open pit coal mines to various modes of failure (i.e., plane, wedge, circular and toppling failure) could be envisaged by virtue of processing and analysis of pertinent satellite data. The aim of the present study was to integrate thematic maps generated using remote sensing image processing techniques, in order to finally produce slope failure hazard zonation maps in and around Singrauli coalfield, India. The various failure-inducing factors, variables and parameters can be extracted from different satellite data and imageries. The data acquired by different sensors such as TM, ETM+, etc., of LANDSAT series and CARTOSAT of ISRO Bhuvan was used in this study. All these data were subsequently used to create different thematic maps such as slope map, lithological map, land use/land cover map, principal component analysis map, digital elevation model (DEM), etc. An advanced analysis for extraction of lineament attributes was also undertaken. 相似文献
16.
An Experimental and Theoretical Approach on the Modeling of Sliding Response of Rock Wedges under Dynamic Loading 总被引：1，自引：1，他引：0
The stability of rock slopes under dynamic loading in mining and civil engineering depends upon the slope geometry, mechanical properties of rock mass and discontinuities, and the characteristics of dynamic loads with time. The wedge failure is one of the common forms of slope failures. The authors presented some stability conditions for rock wedges under dynamic loading and they confirmed their validity through the laboratory experimental studies in a previous paper in 2000, which is often quoted by others to validate their softwares, including some commercial software. In this study, the authors investigate the sliding responses of rock wedges under dynamic loads rather than the initiation of wedge sliding. First, some laboratory model tests are described. On the basis of these model tests on rock wedges, the theoretical model proposed previously is extended to compute the sliding responses of rock wedges in time domain. The proposed theoretical model is applied to simulate the sliding responses of rock wedge model tests and its validity is discussed. In the final part, the method proposed is applied to actual wedge failures observed in 1995 Dinar earthquake and 2005 Pakistan–Kashmir earthquake, and the results are discussed. 相似文献
17.
Girish Ch. Kothyari P. D. Pant Khayingshing Luirei 《Journal of the Geological Society of India》2012,80(1):101-110
Main Boundary Thrust (MBT) zone is constituted of some of the landslide prone areas in southeastern part of Kumaun Sub-Himalaya. Role of landslides as natural hazard and hill slope modifying agent is well documented from various part of Himalayan region and southern hills of Kumaun particularly in the MBT zone, which are susceptible to various type of mass movement. The rocks making up the slopes has been put to a number of brittle deformation phases during the movement along the MBT, and are traversed by number of joint sets. In the open slope these intersecting joint sets forms wedges and are the most favorable site for initiation of rockfalls and other types of landslides. Landslides are taking place primarily due to high angle slopes, formation of structural wedges along the free steep slopes, sheared nature of the rocks due to proximity to the MBT and neotectonic activities along the MBT and other transverse faults. Wedge failure is a common type of landslides in rock slopes characterized by multiple joints and acts as sliding planes for the failed blocks. Field observations and wedge failure analysis indicates most of the landslides taking place in MBT zone of Kumaun Sub-Himalaya are joint controlled. Safety Factor analysis suggests MBT zone of Kumaun Sub-Himalayan region is prone to landslides and related mass movements. This zone is also neotectonically active as indicated by various geomorphic signatures such as structurally controlled drainage pattern, offsetting of fan by MBT and formation of number of small lakes. 相似文献
18.
Jagadish Kundu Kripamoy Sarkar Ashutosh Tripathy T N Singh 《Journal of Earth System Science》2017,126(8):112
Several deformation phases in tectonically active Himalayas have rendered the rock masses very complex in terms of structure, lithology and degree of metamorphism. Again, anthropogenic activities such as roads, tunnels and other civil engineering constructions have led to a state of disequilibrium which in many cases, results in failure of rock masses. National Highway-05 around Jhakri area in India is a major connecting route to the China border in the hilly terrains of the state Himachal Pradesh. It cuts through the Himalayan rocks and has a hazardous history of landslides destroying human lives and interrupting communication very frequently. As a contribution towards the mitigation process, a study has been carried out along the highway to analyse kinematic stability and qualitative estimation of rock mass condition through rock mass classification systems. The kinematic analysis shows that the rock slopes are prone to planar and wedge failure. Rock mass rating for most of the locations lies between 7 and 34, representing a poor rock mass quality (Class IV), whereas slope mass rating is more disperse and ranges from 11 to 52 for most of the slopes (Class III, IV and V). 相似文献
19.
三峡库区岸坡消落带是库岸边坡稳定性的敏感地带。库区内多次发生的地质灾害均与消落带的岩体劣化有关。随着时间的推移消落带的岩体劣化情况日益加剧,新生型滑坡不断涌现。本文通过实地调查与室内分析,系统总结了三峡库区秭归至巴东段岸坡消落带岩体劣化的类型以及新生型滑坡隐患的演化模式。研究表明,区内消落带岩性主要以碳酸盐岩类和碎屑岩类为主,碳酸盐岩类劣化类型主要有溶蚀(潜蚀)、裂缝显化与扩张和机械侵蚀,碎屑岩类的劣化类型主要有松动(剥落)、冲蚀(磨蚀)、结构面崩解块裂和软硬相间侵蚀,其中以松动/剥落型最为发育。在此基础上结合结构面发育特征、岸坡结构、岩性及结构和边界特征,厘定了不同岸坡消落带岩体劣化演化形成新生型滑坡隐患点的模式,碳酸岩盐类岸坡主要以基座碎裂压溃型、基座掏空倾倒型、顺向滑移型为主;碎屑岩类岸坡主要以软硬相间坍(崩)塌型、视倾向楔形滑动型、顺向滑移型及逆向倾倒型为主。研究结果可为三峡库区地质灾害监测预警及防治提供技术支撑。 相似文献
20.
《Geomechanics and Geoengineering》2013,8(1):51-62
The fundamental principles of the strength reduction method (SRM) are incorporated into the rock failure process analysis (RFPA) code to produce an RFPA–SRM method for analysing the failure process and stability of rock and soil slopes. The RFPA–SRM method not only satisfies the global equilibrium, strain-consistent, and non-linear constitutive relationship of rock and soil materials but also takes into account the heterogeneous characteristics of materials on the micro- and macro-scales. When the proposed method is used for slope stability analysis, both the critical failure surface and the safety factor can be obtained directly without any assumptions regarding the shape and location of the failure surface. The numerical results agree well with those obtained using conventional limit equilibrium and other FEM strength reduction methods. The proposed technique is applied to a number of more complex cases, including slopes in mixed rock–soil formations, rock layer formations, and highly jointed rock masses. It is shown that the RFPA–SRM method can describe the mechanism of failure of slopes and has potential applications in a large range of geoengineering problems. 相似文献