共查询到20条相似文献，搜索用时 15 毫秒
1.
The Changle–Nanao ductile shear zone was developed from a suture zone. The evidence from the ductile fabrics and mylonitic microstructures indicates that the strike-slip was sinistral during pre-collision. It became dominantly dextral in the syn-collision stage in late Early Cretaceous. The dextral strike-slip movement continued in the post-collision stage with extension as the dominant process. The strike-slip movement of the zone was strictly controlled by dynamics of collision between the Fujian (Min)–Taiwan (Tai) microcontinent and the Fujian (Min)–Zhejiang (Zhe) Mesozoic volcanic arc during the time interval of 100–120 Ma. The Min–Tai microcontinent in which the ductile shear zone developed might have been located originally to the south of its present position. The northward migration of the microcontinent had contributed to a few hundred kilometers of drift rather than a shear displacement. The real shear displacement is small due to the change of strike-slip direction from sinistral to dextral. 相似文献
2.
中生代巴彦喀拉-松潘甘孜地体向东昆仑地体斜向俯冲,在东昆仑南缘形成一条巨型的韧性剪切带。剪切带中发育的旋转碎斑、书斜构造、解理阶步、云母鱼、S-C组构、不对称褶皱、雁列脉等宏微观构造,显示剪切带兼具右行和左行的特征,且右行早于左行剪切,但总体以左行剪切为主。对西大滩糜棱岩化花岗岩和小南川未变形花岗岩进行了LA-ICP-MS锆石UPb测年,西大滩岩体侵位于199.3±2.2Ma,小南川岩体形成于196.4±1.3Ma。西大滩与小南川岩体中的锆石为典型的岩浆锆石,其年龄代表了岩体侵位的时代。鉴于2个岩体的变形程度完全不同,东昆仑南缘在199~196Ma之间发生了左行韧性剪切。 相似文献
3.
Kazuhiro Tsukada 《Gondwana Research》2003,6(4):687-698
The Hida marginal belt (HMB), which consists of various kinds of fault-bound blocks, is located between the continental massif of the Hida belt and the Mesozoic accretionary complex of the Mino belt in Central Japan. Detailed field investigation reveals that the HMB had grown through the two different movements, i.e., Jurassic dextral and Cretaceous sinistral movements. The Jurassic dextral ductile shear zones run in the southern marginal part of the Hida belt and the northern part of the HMB, whereas the Cretaceous sinistral cataclastic shear zones occur in the southern part of the HMB and the northern marginal part of the Mino belt. Geologic map and field evidence seem to suggest that the Jurassic dextral movement form the fault-bound blocks of the HMB to form the basic structure of the Hida marginal belt, i.e., formation of the ‘proto-HMB.’ Following the dextral movement, the sinistral one restructured the ‘proto-HMB’ to complete the present feature of the Hida marginal belt. The Cretaceous sinistral movement might result in the sinistral collision between the proto-HMB and the Mino belt. 相似文献
4.
The Norumbega fault system in the Northern Appalachians in eastern Maine experienced complex post-Acadian ductile and brittle deformation from middle through late Paleozoic times. Well-preserved epizonal ductile shear zones in Fredericton belt metasedimentary rocks and granitic batholiths that intrude them provide valuable information on the nature, geometry, and evolution of orogen-parallel strike-slip Norumbega faulting. Metasedimentary rocks were ductilely sheared into phyllonite schistose mylonite, whereas granite into mylonite within the ductile shear zones. Ductile shearing took place at conditions of the lower greenschist facies with peak temperatures on the order of 300–350° based on comparison of plastic quartz and brittle feldspar microstructures, confirming a shallow crustal environment during faulting.Ductile shear strain was partitioned into two major shear zones in easternmost Maine—the Waite and Kellyland zones—but these zones converge toward the southwest. Megascopic, mesoscopic, and microscopic kinematic indicators confirm that fault motion in both zones was dominantly dextral strike-slip. Detailed mapping, especially in the plutonic rocks, reveals a complex ductile deformation history in the area where the Waite and Kellyland zones converge. Shear strain is broadly distributed in the rocks between Kellyland and Waite zones, and increases toward their junction. Multiple dextral high-strain zones oblique to both zones resemble megascopic synthetic c′ shear bands. Together with the Kellyland and Waite master shear zones, these define a megascopic S–C′ structure system produced in a regional-scale dextral strike-slip shear duplex that developed in the transition zone between the deeper (south-central Maine) and shallower (eastern Maine) segments of the Norumbega fault system.Granite plutons caught within the strike-slip shear duplex were intensely sheared and progressively smeared into long and narrow slivers identified by this study. The western lobe of the Deblois pluton and the Lucerne pluton have been recognized as the sources, respectively of the Third Lake Ridge and Morrison Ridge granite slivers. Restoration of both granite slivers to their presumed original positions yields approximately 25 km of dextral strike-slip displacement along only the Kellyland and synthetic ductile shear zones. 相似文献
5.
铧厂沟金矿床区域韧性剪切带特征 总被引：3，自引：0，他引：3
首次对铧厂沟金矿床区域韧性剪切带进行了较为系统的研究。根据野外地质调查和室内显微构造分析 ,区内发育一条较大区域韧性剪切带 ,无论沿走向还是顺倾向均呈舒缓波状 ,强变形带和弱变形域呈镶嵌形式。区域韧性剪切带经历了右行—左行—右行多期 (次 )活动 ,剪切方位也多次变化 ;早期形成温度约 5 0 0℃ ,以右行剪切为主 ,古应力值大于 0 .0 75GPa。控矿韧脆性剪切带是区域韧性剪切带演化的产物 ,最终形成脆性断裂。区域韧性剪切作用控制矿床、矿带的分布 ,并使部分金从矿源层分溢出来 ,产生第一阶段金的富集。次级韧脆性剪切带 (控矿剪切带 )控制富矿体的分布。因此 ,铧厂沟金矿床可称为韧性剪切带型金矿床。另外 ,中 -下泥盆统三河口群第一岩段第一岩层 (D1 -2 SH1a)部分原岩有明显海底热水同沉积特征 ;在矿床之西万家山—张家山应注意寻找硅化石英粗糜棱岩型金矿石。 相似文献
6.
Palaeozoic late collisional strike-slip deformations in Tianshan and Altay, Eastern Xinjiang, NW China 总被引：12，自引：0，他引：12
ABSTRACT In Central Asia, thrusts and shear zones resulting from Palaeozoic accretional events were reworked by E–W-trending ductile strike-slip faults during late Palaeozoic–early Mesozoic time. In the Tianshan range, microstructures and quartz C-axis fabrics show a main dextral shearing associated with sinistral localized shear zones. The relationship between these conjugate structures indicates a NNW–SSE-trending bulk shortening. In the Chinese Altay mountains, the existence of δ-type microstructures in an important sinistral mylonitic zone infers high rates of deformation. This shear zone is bordered by a late dextral ductile fault synchronous with a granite emplacement. Field evidence and datings from the literature provide chronological constraints. In the late Carboniferous, the sinistral mylonitic deformation took place in the Erqishi–Irtysh shear zone in the northeastern part of Xinjiang and in Kazakhstan. During the Early Permian, a regional dextral event occurred in the Tianshan range and under the whole of northern Xinjiang. 相似文献
7.
8.
雪峰山区韧性剪切构造带 总被引：12，自引：1，他引：12
雪峰山区存在着三条与山脉步向一致的北东向弧形韧性剪切带(Fl、F_2、F_3),F_1以左旋剪切为主,F_2、F_3以右旋剪切为主,但均系同一次构造剪切力所致。由变形岩石中的旅转应变体估算出剪切中心地带的剪切应力值大约是7-8,有限应变沿X最大拉伸量195％,沿Z方向最大缩短量为62％。其深部韧性剪切发生于加里东构造期,这之后又遭受浅部脆性应变叠加而构成断裂构造综合实体。 相似文献
9.
北大别穹隆是在早白垩世造山后伸展活动中形成的。其北界为北西西走向、倾向北北东、正左行平移的晓天-磨子潭韧性剪切带,南界为北西走向、倾向南东、右行“逆冲”的五河-水吼韧性剪切带。通过对这两条剪切带的构造观测、运动学分析、石英C轴组构测量、变形温度分析及变形模拟,表明剪切带原先为中地壳同一近水平的韧性拆离剪切带。该拆离剪切带在原始近水平状态时的活动为上盘向280°方位的伸展运动。随后在大规模岩浆活动与北大别穹隆的隆升中,这一剪切带被动地抬升与剥露,而出露于现今的穹隆边界上。变形模拟显示,北大别穹隆构造现今为近EW轴向的背形,其上隆幅度西强东弱。北大别穹隆的形成过程表明为典型的造山带变质核杂岩。 相似文献
10.
景德镇韧性剪切带位于新元古代江南造山带的核部,其构造变形特征和形成时代对华南新元古代至早古生代构造演
化具有重要的制约意义。景德镇韧性剪切带呈北东向展布,全长约180 km,最大出露宽度为~7 km。通过详细的野外地质
调查和室内定向薄片鉴定,在景德镇韧性剪切带中识别出了两期韧性走滑构造变形,并研究了其运动学指向和形成时的温
压条件。早期构造变形表现为左旋韧性走滑兼逆冲作用,形成温度为420~530℃,差应力为40~300 MPa;晚期变形主要表
现为右旋走滑,形成温度为300~420℃,差应力为120~350 MPa。结合前人资料,景德镇韧性剪切带左旋走滑兼逆冲作用形
成于新元古代造山作用的晚期（810~800 Ma）,是由同造山挤压到后造山伸展调整的结果;而右旋走滑形成于早古生代,是
华南早古生代陆内造山作用的产物。 相似文献
11.
In the Bear Creek area of the Sierra Nevada batholith, California, the high temperature postmagmatic deformation structures of the Lake Edison granodiorite include steeply-dipping orthogneiss foliations, joints, and ductile shear zones that nucleated on joints and leucocratic dykes. Exploitation of segmented joints resulted in sharply bounded, thin shear zones and in large slip gradients near the shear zone tips causing the deformation of the host rock at contractional domains. The orthogneiss foliation intensifies towards the contact with the younger Mono Creek granite and locally defines the dextral Rosy Finch Shear Zone (RFSZ), a major kilometre-wide zone crosscutting the pluton contacts. Joints predominantly strike at N70–90°E over most of the Lake Edison pluton and are exploited as sinistral shear zones, both within and outside the RFSZ. In a narrow (∼250 m thick) zone at the contact with the younger Mono Creek granite, within the RFSZ, the Lake Edison granodiorite includes different sets of dextral and sinistral shear zones/joints (the latter corresponding to the set that dominates over the rest of the Lake Edison pluton). These shear zones/joints potentially fit with a composite Y–R–R′ shear fracture pattern associated with the RFSZ, or with a pattern consisting of Y–R-shear fractures and rotated T′ mode I extensional fractures. The mineral assemblage of shear zones, and the microstructure and texture of quartz mylonites indicate that ductile deformation occurred above 500 °C. Joints and ductile shearing alternated and developed coevally. The existing kinematic models do not fully capture the structural complexity of the area or the spatial distribution of the deformation and magmatic structures. Future models should account more completely for the character of ductile and brittle deformation as these plutons were emplaced and cooled. 相似文献
12.
Analyses of deflected river channels, offset of basement rocks, and fault rock structures reveal that slip sense inversion occurred on major active strike-slip faults in southwest Japan such as the Yamasaki and Mitoke fault zones and the Median Tectonic Line (MTL). Along the Yamasaki and Mitoke fault zones, small-size rivers cutting shallowly mountain slopes and Quaternary terraces have been deflected sinistrally, whereas large-size rivers which deeply incised into the Mio-Pliocene elevated peneplains show no systematically sinistral offset or complicated hairpin-shaped deflection. When the sinistral offsets accumulated on the small-size rivers are restored, the large-size rivers show residual dextral deflections. This dextral offset sense is consistent with that recorded in the pre-Cenozoic basement rocks. S–C fabrics of fault gouge and breccia zone developed in the active fault zones show sinistral shear sense compatible with earthquake focal mechanisms, whereas those of the foliated cataclasite indicate a dextral shear sense. These observations show that the sinistral strike-slip shear fabrics were overprinted on dextral ones which formed during a previous deformation phase. Similar topographic and geologic features are observed along the MTL in the central-eastern part of the Kii Peninsula. Based on these geomorphological and geological data, we infer that the slip sense inversion occurred in the period between the late Tertiary and mid-Quaternary period. This strike-slip inversion might result from the plate rearrangement consequent to the mid-Miocene Japan Sea opening event. This multidisciplinary study gives insight into how active strike-slip fault might evolves with time. 相似文献
13.
长乐-南澳韧性剪切带走滑特征探讨 总被引：8，自引：0，他引：8
长乐-南澳韧性剪切带可能是在碰撞造山缝合带基础上发育的,其走滑特性严格受闽台微大陆与闽浙中生代火山弧碰撞过程中碰撞动力学的制约。岩石韧性组构和糜棱岩变形的微构造研究表明,碰撞前期走滑为左行。在早垩世晚期(100-120Ma)的主碰撞期和以伸展作用为主的碰撞后期,该带以右行为主,这种右行走滑一直持续至今。发育韧性剪切带的闽台微大陆(或称平潭-东山带)原始位置可能比现今更靠南,这是属于几百公里的漂移位移而不是剪切位移。 相似文献
14.
桐柏地区高压变质地体在地壳中的抬升机制 总被引：9，自引：7，他引：2
桐柏杂岩位于秦岭与大别造山带之间,南北两侧为NWW-SEE向延伸的含榴辉岩高压变质地体,其构造就位过程及其与高压变质地体的构造关系为地质学家们所关注.本文研究表明,所谓的桐柏杂岩实际上是一个早白垩世花岗质片麻岩杂岩体,其内包裹一定数量的三叠纪中高级变质岩石.桐柏杂岩南北两条边界韧性剪切带具有相反的运动学指向,分别为大型右行和左行韧性剪切带,其形成时代为131Ma.这两条韧性剪切带中的剪切面理分别朝SSW和NNE向倾斜,韧性剪切带及杂岩体内部发育的拉伸线理均稳定地朝SEE方向缓倾伏.而在杂岩体的东端发育低角度近南北向韧性剪切变形带,其糜棱面理朝SEE方向低角度缓倾斜,矿物拉伸线理也朝SEE方向低角度缓倾伏,运动学标志指示东侧地质体朝295°～310°的方向逆冲.因此,桐柏杂岩实际上被一个顺造山带的韧性剪切带所围限,这个韧性剪切带及杂岩体内部韧性变形运动学指示了一个早白垩世由东向西的低角度抬升过程,而这一过程直接导致了含榴辉岩高压变质地体沿着造山带的方向从地壳深部抬升到近地表.这一研究结果对理解和认识桐柏-大别-苏鲁地区高压一超高压变质地体的晚期抬升过程具有重要意义. 相似文献
15.
东亚原特提斯洋(Ⅲ):北秦岭韧性剪切带构造特征 总被引：4，自引：4，他引：0
北秦岭造山带位于华北陆块与南秦岭微陆块的衔接部位,是研究原特提斯洋构造演化的关键区域之一。北秦岭造山带内主要发育四条韧性剪切带,包括位于边界处的洛南-栾川剪切带和商丹剪切带,及其内部的官坡-乔端剪切带和朱阳关-夏馆剪切带。通过详细的野外构造解析、显微构造分析和石英EBSD组构分析,获得了四条主要剪切带的活动特征,认为(1)在早古生代华北陆块与北秦岭微陆块拼合后的折返过程中,洛南-栾川、官坡-乔端和朱阳关-夏馆剪切带开始了初始的剪切活动;(2)~380Ma之后,华北、华南陆块在向北漂移过程中逐渐由近东西向展布转换为近南北向展布,导致洛南-栾川和商丹剪切带表现为明显的右行剪切;(3)~320Ma时,华北陆块和南秦岭微陆块之间的剪刀式拼合导致洛南-栾川剪切带表现为右行剪切,商丹剪切带表现为左行剪切,而官坡-乔端和朱阳关-夏馆剪切带在陆块内部不同构造单元的协调作用下分别表现为左行剪切和右行剪切。 相似文献
16.
The Greiner shear zone in the Tauern Window, Eastern Alps, changes from a zone of distributed (dominantly sinistral) shear in supracrustal rocks to a series of narrow, gully forming dextral splays where it enters basement gneisses. Within these splays, granodiorite is transformed into quartz‐poor biotite and/or chlorite schists, reflecting hydration, removal of Si, Ca and Na, and concentration of Fe, Mg and Al. Stable isotope analyses show a prominent increase in δD and a decrease in δ18O from granodiorite into the shear zones. These changes indicate significant channelized flow of an externally derived, low‐δ18O, high‐δD fluid through the shear zones. The shear zone schists are chemically similar to blackwall zones developed around serpentinite bodies elsewhere in the Greiner zone and the stable isotope data support alteration via serpentinite‐derived fluid. Monazite in schist from one shear zone yields spot dates of 29–20 Ma, indicating that the fluid influx and switch from sinistral to dextral shear occurred at or shortly after the thermal peak of the Alpine orogeny (c. 30 Ma). We suggest that Alpine metamorphism of serpentinites released large amounts of high‐δD, low‐δ18O, Si‐undersaturated, Fe + Mg‐saturated fluids that became channelized along prior zones of weakness in the granodiorite. Infiltration of this fluid facilitated growth of chlorite and biotite, which in turn localized later dextral strain in the narrow splays via cleavage‐parallel slip. This dextral strain event can be linked to other structures that accommodated tectonic escape of major crustal blocks during dextral transpression in the Eastern Alps. This study shows that serpentinite devolatilization can play an important role in modifying both the chemistry and rheology of surrounding rocks during orogenesis. 相似文献
17.
Jos Cembrano Alain Lavenu Peter Reynolds Gloria Arancibia Gloria Lpez Alejandro Sanhueza 《Tectonophysics》2002,354(3-4)
The southern Andes plate boundary zone records a protracted history of bulk transpressional deformation during the Cenozoic, which has been causally related to either oblique subduction or ridge collision. However, few structural and chronological studies of regional deformation are available to support one hypothesis or the other. We address along- and across-strike variations in the nature and timing of plate boundary deformation to better understand the Cenozoic tectonics of the southern Andes.Two east–west structural transects were mapped at Puyuhuapi and Aysén, immediately north of the Nazca–South America–Antarctica triple junction. At Puyuhuapi (44°S), north–south striking, high-angle contractional and strike-slip ductile shear zones developed from plutons coexist with moderately dipping dextral-oblique shear zones in the wallrocks. In Aysén (45–46°), top to the southwest, oblique thrusting predominates to the west of the Cenozoic magmatic arc, whereas dextral strike-slip shear zones develop within it.New 40Ar–39Ar data from mylonites and undeformed rocks from the two transects suggest that dextral strike-slip, oblique-slip and contractional deformation occurred at nearly the same time but within different structural domains along and across the orogen. Similar ages were obtained on both high strain pelitic schists with dextral strike-slip kinematics (4.4±0.3 Ma, laser on muscovite–biotite aggregates, Aysén transect, 45°S) and on mylonitic plutonic rocks with contractional deformation (3.8±0.2 to 4.2±0.2 Ma, fine-grained, recrystallized biotite, Puyuhuapi transect). Oblique-slip, dextral reverse kinematics of uncertain age is documented at the Canal Costa shear zone (45°S) and at the Queulat shear zone at 44°S. Published dates for the undeformed protholiths suggest both shear zones are likely Late Miocene or Pliocene, coeval with contractional and strike-slip shear zones farther north. Coeval strike-slip, oblique-slip and contractional deformation on ductile shear zones of the southern Andes suggest different degrees of along- and across-strike deformation partitioning of bulk transpressional deformation.The long-term dextral transpressional regime appears to be driven by oblique subduction. The short-term deformation is in turn controlled by ridge collision from 6 Ma to present day. This is indicated by most deformation ages and by a southward increase in the contractional component of deformation. Oblique-slip to contractional shear zones at both western and eastern margins of the Miocene belt of the Patagonian batholith define a large-scale pop-up structure by which deeper levels of the crust have been differentially exhumed since the Pliocene at a rate in excess of 1.7 mm/year. 相似文献
18.
《Geodinamica Acta》2013,26(4):157-163
The Terena Formation is located in the central part of the Ossa-Morena Zone (OMZ) and outcrops in the core of a latter (D3) first order syncline. This Formation is a Lower Devonian flysch and shows an unusual “Z” shape, with a central sector trending nearly N-S, and the tips trending NW-SE. This central sector is crossed by the cleavage (NW-SE) showing an apparent dextral (clockwise) transection pattern, anomalous and opposite to the regional widespread sinistral (anti-clockwise) transpression. The same sector with cartographic dextral transection, shows at outcrop scale, mesoscopic folds with a sinistral transection. During the Lower Devonian a N-S trending basin was developed as an effect of an early tectonic deformation phase. This trough was filled with turbidites and its elongated geometry determined the shape of the main syncline. We propose that the dextral transection pattern, at cartographic scale, result from the superposition of the NW-SE upright S3 cleavage on this major regional structure controlled by a sedimentary trough. The mesoscopic folds, observed on the upper levels of the sedimentary sequence were not influenced by the topographic anisotropy of the basin, and therefore they developed a left transection, according to the regional deformation mechanisms. The “Z” shape of the syncline could be explained as a consequence of two major tectonic shear zones situated along the north and south boundaries of the OMZ, respectively the Tomar-Badajoz-Cordoba Shear Zone and the South Iberian Suture, lined by the Beja-Acebuches Ophiolitic Complex. Both shear zones have a sinistral transpressive character and were active during late Variscan tectonic events. 相似文献
19.
An integrated approach to resolve the kinematics of the controversial Achankovil Shear Zone (AKSZ) has been attempted involving remote sensing data, shaded relief topo-maps, ground details of lithology and mesoscopic structures. An excellent correlation of structural trends exists on all scales of observation. The AKSZ is distinctly defined by NW–SE trending foliation fabrics with steep dips to southwest. The adjacent Madurai block and Trivandrum block show contrasting lithological and structural characteristics as shown in structural cross-sections.The mesoscopic structural studies reveal the presence of sub-horizontal stretching lineations, asymmetric structures like S–C′ fabrics, porphyroclasts, ‘S’ shaped folds and shear bands confirming the strike-slip component of shear along AKSZ. The deformation undergone by the AKSZ could be described in terms of an initial dextral deformation — D1, reactivated and superimposed by sinistral kinematics — D2, which is also supported by megascopic structural interpretation of remote sensing data. The megascopic structural interpretation of AKSZ displays en-echelon pattern of lineaments with right overstepping arrangement, which can be interpreted as an evidence of the latest sinistral transpressional deformation. 相似文献
20.
The South Qinling structural belt, as a part of the Qinling orogen, is bounded by the Shang-Dan suture to the north. Previous studies show the two regional conjugate ductile shear zones developed in the Mid-Late Jurassic epoch, e.g., Ningshan ductile shear zone characteristic of ENE-striking, sinistral shearing, Ankang ductile shear zone typical of NW-direction, dextral shearing, whose shear deformation age respectively is 169~162 Ma and 178~163 Ma respectively. The lineations collected from the two ductile shear zones suggest the maximum principal stress (σ1) is characterized by the direction of NE trending consistent with their obtuse angle bisector, which is corresponded with maximum effective moment criterion. Thus, our work suggests the blocks delimited by the conjugate ductile shear zones (e.g., ENE-striking and NW-trending) in the interior of the Qinling orogen, dominated by NE-SW compression, pinned by the Hannan-Micangshan massif, laterally extruded in the Mid-Late Jurassic time, which is featured by westward escaping in western Qinling belt and eastward in the eastern Qinling belt. This kinematical model probably marks the dominated activity of the Qinling orogen in the Mid-Late Jurassic time. 相似文献