首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 375 毫秒
1.
In meandering rivers cut into bedrock, erosion across a channel cross‐section can be strongly asymmetric. At a meander apex, deep undercutting of the outer bank can result in the formation of a hanging cliff (which may drive hillslope failure), whereas the inner bank adjoins a slip‐off slope that connects to the hillslope itself. Here we propose a physically‐based model for predicting channel planform migration and incision, point bar and slip‐off slope formation, bedrock abrasion, the spatial distribution of alluvial cover, and adaptation of channel width in a mixed bedrock‐alluvial channel. We simplify the analysis by considering a numerical model of steady, uniform bend flow satisfying cyclic boundary conditions. Thus in our analysis, ‘sediment supply’, i.e. the total volume of alluvium in the system, is conserved. In our numerical simulations, the migration rate of the outer bank is a specified parameter. Our simulations demonstrate the existence of an approximate state of dynamic equilibrium corresponding to a near‐solution of permanent form in which a bend of constant curvature, width, cross‐sectional shape and alluvial cover distribution migrates diagonally downward at constant speed, leaving a bedrock equivalent of a point bar on the inside of the bend. Channel width is set internally by the processes of migration and incision. We find that equilibrium width increases with increasing sediment supply, but is insensitive to outer bank migration rate. The slope of the bedrock point bar varies inversely with both outer bank migration rate and sediment supply. Although the migration rate of the outer bank is externally imposed here, we discuss a model modification that would allow lateral side‐wall abrasion to be treated in a manner similar to the process of bedrock incision. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

2.
Anabranching rivers evolve in various geomorphic settings and various river planforms are present within these multi‐channel systems. In some cases, anabranches develop meandering patterns. Such river courses existed in Europe prior to intensive hydro‐technical works carried out during the last 250 years. Proglacial stream valleys, inherited from the last glaciation, provided a suitable environment for the development of anabranching rivers (wide valleys floors with abundant sand deposits). The main objective of the present study is to reconstruct the formation of an anabranching river planform characterized by meandering anabranches. Based on geophysical and geological data obtained from field research and a reconstruction of palaeodischarges, a model of the evolution of an anabranching river formed in a sandy floodplain is proposed. It is demonstrated that such a river system evolves from a meandering to an anabranching planform in periods of high flows that contribute to the formation of crevasse splays. The splay channels evolve then into new meandering flow paths that form ‘second‐order’ crevasses, avulsions and cutoffs. The efficiency of the flow is maintained by the formation of cutoffs and avulsions preventing the development of high sinuosity channels, and redirecting the flow to newly formed channels during maximum flow events. A comparison with other anabranching systems revealed that increased discharges and sediment loads are capable of forming anabranching planforms both in dryland and temperate climate zones. The sediment type available for transport, often inherited from older sedimentary environments, is an important variable determining whether the channel planform is anabranching, with actively migrating channels, or anastomosing, with stable, straight or sinuous branches. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

3.
Geomorphic river design strives for natural resilience by encouraging geomorphic form complexity and morphological processes linked to greater habitat diversity. Increasing availability of high-resolution topographic data and spatial feature mapping methods provide advantages for morphological analysis and river restoration planning. We propose and evaluate an approach to quantifying topographic variability of geomorphic form and pixel-level surface roughness resulting from channel planform geometry differences using spatially continuous variety computation applied to component metrics including flow direction, aspect and planform curvature. We define this as the geomorphic form variation (GFV) approach and found it scalable, repeatable and a multi-stage analytical metric for quantifying physical aspects of river-bed topographic variability. GFV may complement process-based morphological feature mapping applications, hydraulic assessment indices and spatial habitat heterogeneity metrics commonly used for ecological quality evaluation and river restoration. The GFV was tested on controlled synthetic channels derived from River Builder software and quasi-controlled sinuous planform flume experiment channels. Component variety metrics respond independently to specific geometric surface changes and are sensitive to multi-scaled morphology change, including coarser-grained sediment distributions of pixel-level surface roughness. GFV showed systematic patterns of change related to the effects of channel geometry, vertical bed feature (pool-bar) frequency and amplitude, and bar size, shape and orientation. Hotspot analysis found that bar margins were major components of topographic complexity, whereas grain-scale variety class maps further supported the multi-stage analytical capability and scalability of the GFV approach. The GFV can provide an overall variety value that may support river restoration decision-making and planning, particularly when geomorphic complexity enhancement is a design objective. Analysing metric variety values with statistically significant hotspot cluster maps and complementary process-based software and mapping applications allows variety correspondence to systematic feature changes to be assessed, providing an analytical approach for river morphology change comparison, channel design and geomorphic process restoration.  相似文献   

4.
This paper analyses types and rates of change in river meander morphology and the links between mechanisms of change and emergent behaviour of planform morphology. It uses evidence of four dates of aerial photography combined with annual field mapping and ground photography to examine the morphological changes and mechanisms of change in a series of bends on an active meandering river, the River Dane in NW England, over a 25 year period. This unique data set allows insight into the spatial and temporal variability of bank line movement and component processes. Bank lines were mapped photogrametrically from air photos of 1984, 1996, 2001 and 2007 and the digitised courses compared in ArcGIS to produce calculations of erosional and depositional areas and rates. Most bends exhibit morphological change that largely follows the autogenic sequence, identified in qualitative models of meander development, from low sinuosity curves through simple symmetric and asymmetric bends to compound forms with lobe development in the apex region. Rates of erosion and bankline movement increase through this sequence until the compound phase. Relationships of amounts of movement to various curvature measures of bend morphology are complex. Several new loops, distinct from compound bend behaviour, have developed during the study period in formerly straight sections. Mechanisms of morphological change are illustrated for four types of bends: new, rapid growth bend; sharp‐angled bend with mid‐channel bar development; symmetric migrating bend; and simple to compound bend development. The changes take place in phases that are not simply related to discharge but to inherent sequences and feedbacks in development of bars and bend morphology and timescales for these are identified. Overall, emergent behaviour of systematic planform change, moderated by channel confinement and boundary features, is produced from spatially and temporally varied channel processes. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

5.
Air photo interpretation and field survey were used to examine rates and patterns of planform change over the last 40 years on an 80 km reach of the Luangwa River, Zambia. The river, a tributary of the Zambezi, is a 100–200 m wide, medium sinuosity sand‐bed river (sinuosity index 1·84). High rates of channel migration (<33 m a−1) and cutoffs on meandering sections are frequent. Some meandering reaches, however, have remained relatively stable. A form of anastomosing with anabranches up to 14 km in length is also a characteristic. Patterns of meander development vary between bends but all can be described in relation to traditional geomorphic models; change occurs by translation, rotation, double‐heading, concave bank bench formation and cutoff causing river realignment. At the local scale spatial variability in bank resistance, induced by floodplain sedimentology, controls rate of bank erosion, and valley‐side channel ‘deflection’ is also apparent. Copyright © 2000 John Wiley & Sons, Ltd.  相似文献   

6.
Historical range of variability (HRV) describes the range of temporal and spatial variations in river variables such as flow regime or channel planform prior to intensive human alteration of the ecosystem. In mountainous river networks, HRV is most usefully applied to spatially differentiated geomorphic process domains with distinctive form and process. Using the Colorado Front Range as an example, three examples of how knowledge of HRV can assist river management and restoration are discussed. The examples involve instream wood load and channel morphology, beaver colonies and valley‐bottom form and process, and flow thresholds in regulated rivers. The question of what a river should look like – that is, what range of process and form the river included prior to intensive human alteration – can be addressed by (i) placing the river within a process domain, (ii) establishing correlations between form parameters that can be remotely sensed and reach‐scale process and form, so that the spatial extent, connectivity, and rarity of process domains within a river network or a region can be quickly assessed, (iii) inferring characteristics of the river prior to intensive alteration by documenting characteristics of the least altered reference rivers and by using proxy indicators of pre‐alteration conditions, and (iv) establishing process thresholds that must be exceeded to maintain form (e.g. flow thresholds to mobilize bed sediment). Once this context has been established, resource managers can better evaluate the options for restoring altered riverine form and function. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

7.
This paper explores the use of planview morphological metrics to quantitatively describe and distinguish mixed bedrock–alluvial multichannel networks from alluvial multichannel networks. The geometries of the channel planforms of two bedrock‐constrained networks (Mekong and Orange rivers) are compared with the classic alluvial anastomosed Upper Columbia River and the wandering Ganga River. Widely recognized indices utilized include: channel link count and channel sinuosity, with additional emphasis being given to the less common metrics: network bifurcation angles and island shape characteristics (i.e. aspect ratio, compactness, roundness and convexity). Link count data, with one notable exception, conform to theoretical expectations. Bifurcation angles for all four multichannel rivers are significantly greater than angles reported for braiding rivers. Island convexity clearly discriminates the two alluvial rivers from the two bedrock‐influenced rivers. The width of the macrochannel, in which each network develops, has a positive influence on the number of channel links and is further related to channel slope variations which, in turn, are influenced by terrain structure revealed using trend‐surface analysis. The geometry of multichannel networks are often laterally constrained such that the values of channel bifurcation angles and link sinuosity values reduce as the network intensifies and channel links are shortened. These latter observations go some way to explain the oft‐noted relatively ‘straight’ links seen within multichannel networks which are a necessary adjustment to space‐filling constraints placed on a network. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

8.
When studying the evolution of landscape, it is difficult to discriminate the influence of anthropogenic from natural causes, or recognise changes caused by different sources of human action. This is especially challenging when the influence of certain sources is overprinted. For instance, although dam closure is the most common method of altering river courses, dam construction is often preceded by hydro‐technical works such as channel straightening, embankment construction or sediment mining. Both dam construction and the hydro‐technical works that precede dam closure can result in changes in the balance between sediment supply and transport capacity, and often, changes in river planform. The main objective of this study was to verify whether the works preceding dam closure are an important driver of river planform changes on the lower Drava River (Hungary). The case study is based on geological and geophysical surveys, as well as the analysis of historical maps covering an anabranching, 23 km long valley section. We show that channel straightening conducted prior to dam closure resulted in a transition from a meandering to sinuous planform with channel bars. Dam construction itself then caused enhanced incision, exposure of bar surfaces, vegetation encroachment and the formation of an anabranching planform. Based on this study, we developed models of alluvial island and channel planform evolution downstream of dams. Dam construction enhances channel incision, narrowing, and the reduction of flow caused by earlier hydro‐technical works. Many rivers downstream of dams experience episodes of anabranching or wandering, with a multi‐thread pattern replacing sinuous, braided and meandering courses. When incision continues, river patterns evolve from anabranching to sinuous via the attachment of alluvial islands to floodplains. However, the timing and sequence of these changes depend on hydrological and sediment supply regimes, geomorphic settings and anthropogenic actions accompanying dam construction. Copyright © 2018 John Wiley & Sons, Ltd.  相似文献   

9.
Artificially straight river channels tend to be unstable, and ultimately develop into river meanders through bank erosion and point‐bar deposition. In this paper account is taken of the effects of riparian and floodplain vegetation on bank strength, floodplain flow resistance, shear stress partitioning, and bedload transport. This is incorporated into an existing 2D hydrodynamic‐morphological model. By applying the new model to an initially straight and single‐threaded channel, the way that its planform and cross‐sectional geometry evolve for different hydraulic and floodplain vegetation conditions is demonstrated. The results show the formation and upstream migration of gravel bars, confluence scouring and the development of meandering and braiding channel patterns. In cases where the channel becomes unstable, the instability grows out of bar formation. The resulting braiding patterns are similar to analytical results. The formation of a transition configuration requires a strong influence from vegetation. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

10.
The origin and growth of blind tidal channels is generally considered to be an erosional process. This paper describes a contrasting depositional model for blind tidal channel origin and development in the Skagit River delta, Washington, USA. Chronological sequences of historical maps and photos spanning the last century show that as sediments accumulated at the river mouth, vegetation colonization created marsh islands that splintered the river into distributaries. The marsh islands coalesced when intervening distributary channels gradually narrowed and finally closed at the upstream end to form a blind tidal channel, or at mid‐length to form two blind tidal channels. Channel closure was probably often mediated through gradient reduction associated with marsh progradation and channel lengthening, coupled with large woody debris blockages. Blind tidal channel evolution from distributaries was common in the Skagit marshes from 1889 to the present, and it can account for the origin of very small modern blind tidal channels. The smallest observed distributary‐derived modern blind tidal channels have mean widths of 0·3 m, at the resolution limit of the modern orthophotographs. While channel initiation and persistence are similar processes in erosional systems, they are different processes in this depositional model. Once a channel is obstructed and isolated from distributary flow, only tidal flow remains and channel persistence becomes a function of tidal prism and tidal or wind/wave erosion. In rapidly prograding systems like the Skagit, blind tidal channel networks are probably inherited from the antecedent distributary network. Examination of large‐scale channel network geometry of such systems should therefore consider distributaries and blind tidal channels part of a common channel network and not entirely distinct elements of the system. Finally, managers of tidal habitat restoration projects generally assume an erosional model of tidal channel development. However, under circumstances conducive to progradation, depositional channel development may prevail instead. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

11.
Occurrence and development of channel bars are major components of the morphodynamics of rivers and their relation to river meandering has been much explored through theory and experimentation. However, field and documentary data of characteristics and evolution over timescales from years to several decades are lacking. Four sets of aerial photographs in the period 1984–2007 were used to map and quantify bar numbers and areas in GIS on an active meandering reach. Bar types were classified. Additional temporal resolution was provided by annual ground photography and mapping for 1981–2010. Analysis was extended backward by use of large scale Ordnance Survey maps from 1873 onwards. As expected, point bars are the most common type but ‘free’ bars of several types are major components of bar deposition. Point bars and attached bars are significantly larger in size than mid‐channel and side bars. Spatial distribution of bars varies down the reach and over time but is related to channel sinuosity, gradient and mobility and to bend evolution. Different types of bar occur in distinctive channel locations, with point and concave‐bend bars in zones of high curvature. Bar activity shows a relation with discharge events and phases and possibly with changing riparian conditions, but superimposed on this is a common sequence of bar evolution from incipient gravel mid‐channel bars to full floodplain integration. This life‐cycle is identified as 7–9 years on average. No evidence for mobility of free bars within the course is found. The results are compared with bar and bend theory; the bars are forced and conform in general to bend theory but detailed variation relates to geomorphic factors and to autogenic sequences of bends and bars. Mid‐channel bars are width induced. Variability of bar occurrence needs to be taken into account in river management and ecological evaluation, including for the EU WFD. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

12.
  相似文献   

13.
The changing form of developing alluvial river bars has rarely been studied in the field, especially in the context of the fixed, compound, mainly alternate gravel bars that are the major morphological feature of the wandering style. Century scale patterns of three‐dimensional growth and development, and the consequent scaling relations of such bars, are examined along the gravel‐bed reach of lower Fraser River, British Columbia, Canada. A retrospective view based on maps and aerial photographs obtained through the twentieth century shows that individual bars have a life history of about 100 years, except in certain, protected positions. A newly formed gravel bar quickly assumes its ultimate thickness and relatively quickly approaches its equilibrium length. Growth continues mainly by lateral accretion of unit bars, consistent with the lateral style of instability of the river. Bar growth is therefore allometric. Mature bars approach equilibrium dimensions and volume that scale with the overall size of the channel. Accordingly, the bars conform with several published criteria for the ultimate dimensions of alternate barforms. Sand bars, observed farther downstream, have notably different morphology. Fraser River presents a typical wandering channel planform, exhibiting elements of both meandered and low‐order braided channels. Hydraulic criteria to which the Fraser bars conform illustrate why this planform develops and persists. The modest rate of bed material transfer along the channel – typical of the wandering type – determines a century‐length time scale for bar development. This time scale is consistent with estimates that have been made for change of the macroform elements that determine the overall geometry of alluvial channels. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

14.
Most of the largest rivers on Earth have multiple active channels connected at bifurcations and confluences. At present a method to describe a channel network pattern and changes in the network beyond the simplistic braiding index is unavailable. Our objectives are to test a network approach to understand the character, stability and evolution of a multi‐channel river pattern under natural discharge conditions. We developed a semi‐automatic method to derive a chain‐like directional network from images that represent the multi‐channel river and to connect individual network elements through time. The Jamuna River was taken as an example with a series of Landsat TM and ETM+ images taken at irregular intervals between 1999 and 2004. We quantified the overall importance of individual channels in the entire network using a centrality property. Centrality showed that three reaches can be distinguished along the Jamuna with a different network character: the middle reach has dominantly one important channel, while upstream and downstream there are about two important channels. Temporally, relatively few channels changed dramatically in both low‐flow and high‐flow periods despite the increase of braiding index during a flood. Based on the centrality we calculated a weighted braiding index that represents the number of important channels in the network, which is about two in the Jamuna River and which is larger immediately after floods. We conclude that the network measure centrality provides a novel characterization of river channel networks, highlighting properties and tendencies that have morphological significance. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

15.
Channel bars and banks strongly affect the morphology of both braided and meandering rivers. Accordingly, bar formation and bank erosion processes have been greatly explored. There is, however, a lack of investigations addressing the interactions between bed and bank morphodynamics, especially over short timescales. One major implication of this gap is that the processes leading to the repeated accretion of mid‐channel bars and associated widenings remain unsolved. In a restored section of the Drau River, a gravel‐bed river in Austria, mid‐channel bars have developed in a widening channel. During mean flow conditions, the bars divert the flow towards the banks. One channel section exhibited both an actively retreating bank and an expanding mid‐channel bar, and was selected to investigate the morphodynamic processes involved in bar accretion and channel widening at the intra‐event timescale. We repeatedly surveyed riverbed and riverbank topography, monitored riverbank hydrology and mounted a time‐lapse camera for continuous observation of riverbank erosion processes during four flow events. The mid‐channel bar was shown to accrete when it was submerged during flood events, which at the subsequent flow diversion during lower discharges narrowed the branch along the bank and increased the water surface elevation upstream from the riffle, which constituted the inlet into the branch. These changes of bed topography accelerated the flow along the bank and triggered bank failures up to 20 days after the flood events. Four analysed flow events exhibited a total bar expansion from initially 126 m2 to 295 m2, while bank retreat was 6 m at the apex of the branch. The results revealed the forcing role of bar accretion in channel widening and highlighted the importance of intra‐event scale bed morphodynamics for bank erosion, which were summarized in a conceptual model of the observed bar–bank interactions. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

16.
The general nature of bulk flow within bedrock single‐channel reaches has been considered by several studies recently. However, the flow structure of a bedrock‐constrained, large river with a multiple channel network has not been investigated previously. The multiple channel network of the Siphandone wetlands in Laos, a section of the Mekong River, was modelled using a steady one‐dimensional hydraulic model. The river network is characterized by a spatially‐varying channel‐form leading to significant changes in the bulk flow properties between and along the channels. The challenge to model the bulk flow in such a remote region was the lack of ideal boundary conditions. The flow models considered both low flow, high inbank and overbank flows and were calibrated using SPOT satellite sensor imagery and limited field data concerning water levels. The application of the model highlighted flow characteristics of a large multi‐channel network and also further indicated the field data that would be required to properly characterize the flow field empirically. Important results included the observation that adjacent channels within the network had different water surface slopes for the same moments in time; thus calibration data for modelling similar systems needs to account for these significant local differences. Further, the in‐channel hydraulic roughness coefficient strongly varied from one cross‐section to the next (Manning's ‘n’ range: 0·01 to 0·10). These differences were amplified during low flow but persisted in muted form during high discharges. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

17.
River networks have been shown to obey power scaling laws and to follow self‐organization principles. Their self‐similar (fractal) properties open a path to relate small scale and large scale hydrological processes, such as erosion, deposition or geological movements. However, the existence of a self‐similar dimension has only been checked using either the whole channel network or, on the contrary, a single channel link. No study has explicitly addressed the possible spatial variation of the self‐similar properties between these two extreme geomorphologic objects. Here, a new method based on self‐similarity maps (SSM) is proposed to spatially explore the stream length self‐similar dimension Dl within a river network. The mapping principle consists in computing local self‐similar dimensions deduced from a fit of stream length estimations using increasing divider sizes. A local uncertainty related to the fit quality is also computed and localized on every stream. To assess the efficiency of the approach, contrasted river networks are simulated using optimal channel networks (OCN), where each network is characterized by an exponent γ conditioning its overall topology. By building SSM of these networks, it is shown that deviations from uniform self‐similarity across space occur. Depending on the type of network (γ parameter), these deviations are or are not related to Strahler's order structure. Finally, it is found numerically that the structural averaged stream length self‐similar dimension Dl is closely related to the more functional γ parameter. Results form a bridge between the studies on river sinuosity (single channel) and growth of channel networks (watershed). As for every method providing spatial information where they were lacking before, the SSM may soon help to accurately interpret natural networks and help to simulate more realistic channel networks. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

18.
Morphodynamics in sand‐bed braided rivers are associated with simultaneous evolution of mid‐channel bars and channels on the braidplain. Bifurcations around mid‐channel bars are key elements that divide discharge and sediment. This, in turn, may control the evolution of connected branches, with effects propagating to both upstream and downstream bifurcations. Recent works on bifurcation stability and development hypothesize major roles of secondary flow and gradient advantage. However, this has not been tested for channel networks within a fully developed dynamic braided river. A reason for this is a lack of detailed measurements with sufficient temporal and spatial length, covering multiple bifurcations. Therefore we used a physics‐based numerical model to generate a dataset of bathymetry, flow and sediment transport of an 80 km river reach with self‐formed braid bars and bifurcations. The study shows that bar dissection due to local transverse water surface gradients is the dominant bifurcation initiation mechanism, although conversion of unit bars into compound bars dominates in the initial stage of a braided river. Several bifurcation closure mechanisms are equally important. Furthermore, the study showed that nodal point relations for bifurcations are unable to predict short‐term bifurcation evolution in a braided river. This is explained by occurrence of nonlinear processes and non‐uniformity within the branches, in particular migrating bars and larger‐scale backwater‐effects, which are not included in the nodal point relations. Planform morphology, on the other hand, has predictive capacity: bifurcation angle asymmetry and bar‐tail limb shape are indicators for near‐future bifurcation evolution. Remote sensing data has predictive value, for which we developed a conceptual model for interactions between bars, bifurcations and channels in the network. We conducted a preliminary test of the conceptual model on satellite images of the Brahmaputra. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

19.
The effects of floodplain vegetation on river planform have been investigated for a medium‐sized river using a 2D morphodynamic model with submodels for flow resistance and plant colonization. The flow resistance was divided into a resistance exerted by the soil and a resistance exerted by the plants. In this way it was possible to reproduce both the decrease in bed shear stress, reducing the sediment transport capacity of the flow within the plants, and the increase in hydraulic resistance, reducing the flow velocities. Colonization by plants was obtained by instantaneously assigning vegetation to the areas that became dry at low water stages. This colonization presents a step forward in the modelling of bank accretion. Bank erosion was related to bed degradation at adjacent wet cells. Bank advance and retreat were reproduced as drying and wetting of the computational cells at the channel margins. The model was applied to a hypothetical case with the same characteristics as the Allier River (France). The river was allowed to develop its own geometry starting from a straight, uniform, channel. Different vegetation densities produced different planforms. With bare floodplains, the river always developed a braided planform, even if the discharge was constant and below bankfull. With the highest vegetation density (grass) the flow concentrated in a single channel and formed incipient meanders. Lower vegetation density (pioneer vegetation) led to a transitional planform, with a low degree of braiding and distinguishable incipient meanders. The results comply with flume experiments and field observations reported in the literature.  相似文献   

20.
Hydraulic interactions between rivers and floodplains produce off‐channel chutes, the presence of which influences the routing of water and sediment and thus the planform evolution of meandering rivers. Detailed studies of the hydrologic exchanges between channels and floodplains are usually conducted in laboratory facilities, and studies documenting chute development are generally limited to qualitative observations. In this study, we use a reconstructed, gravel‐bedded, meandering river as a field laboratory for studying these mechanisms at a realistic scale. Using an integrated field and modeling approach, we quantified the flow exchanges between the river channel and its floodplain during an overbank flood, and identified locations where flow had the capacity to erode floodplain chutes. Hydraulic measurements and modeling indicated high rates of flow exchange between the channel and floodplain, with flow rapidly decelerating as water was decanted from the channel onto the floodplain due to the frictional drag provided by substrate and vegetation. Peak shear stresses were greatest downstream of the maxima in bend curvature, along the concave bank, where terrestrial LiDAR scans indicate initial floodplain chute formation. A second chute has developed across the convex bank of a meander bend, in a location where sediment accretion, point bar development and plant colonization have created divergent flow paths between the main channel and floodplain. In both cases, the off‐channel chutes are evolving slowly during infrequent floods due to the coarse nature of the floodplain, though rapid chute formation would be more likely in finer‐grained floodplains. The controls on chute formation at these locations include the flood magnitude, river curvature, floodplain gradient, erodibility of the floodplain sediment, and the flow resistance provided by riparian vegetation. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号