首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 406 毫秒
1.
An active oolitic sand wave was monitored for a period of 37 days in order to address the relationship between the direction and strength of tidal currents and the resultant geometry, and amount and direction of migration of bedforms in carbonate sands. The study area is situated in a tidal channel near Lee Stocking Island (Exumas, Bahamas) containing an estimated 5.5 to 6 × 105 m3 of mobile oolitic sand. Tidal ranges within the inlet are microtidal and the maximum current velocity at the studied site is 0.6 m s?1. At least 300–400 m3 of mostly oolitic sand are formed within, or brought into, the channel area every year. The tidal inlet is subdivided into an ocean-orientated segment, in which sand waves are shaped by both flood and ebb tides, and a platform-orientated segment, where sand waves are mainly shaped by flood tides. The studied sand wave lies on the platformward flood-tide dominated segment in a water depth of 3.5.4.5 m. During the 37 days of observation, the oolitic and bioclastic sand wave migrated 4 m in the direction of the dominant flood current. The increments of migration were directly related to the strength of the tide. During each tidal cycle, bedforms formed depending on the strength of the tidal current, tidal range and their location on the sand wave. During flood tides, a steep lee and a gentle stoss side formed and current ripples and small dunes developed on the crest of the sand wave, while the trough developed only ripples. The average lee slope of the sand wave is 24.2°, and therefore steeper than typical siliciclastic sand waves. During ebb tides, portions of the crest are eroded creating a convex upward ebb stoss side, covered with climbing cuspate and linguoid ripples and composite dunes. The area between the ebb-lee side and the trough is covered with fan systems, sinuous ripples and dunes. The migration of all bedforms deviated to a variable degree from the main current direction, reflecting complex flow patterns in the tidal inlet. Small bedforms displayed the largest deviation, migrating at an angle of up to 90° and more to the dominant current direction during spring tides.  相似文献   

2.
ABSTRACT In the region of the Athabasca Oil Sands, Alberta, the Lower Cretaceous McMurray Formation comprises 50-80 m of uncemented quartz sand and associated shale, saturated throughout by bitumen. The sediments are dominantly of continental origin, except in the uppermost parts of the formation where sedimentation was influenced by the encroaching boreal sea.
In most outcrop and mine face exposures of the McMurray Formation, a sequence of three facies is recognized. In ascending order these are: (1) an erosionally based thick-bedded sand facies, 2-20 m thick, dominated by large-scale trough cross-beds; (2) an epsilon cross-stratified facies with solitary sets up to 25 m in thickness, consisting of decimetre to metre thick couplets of sand/mud, with depositional slopes of 8-12° and palaeocurrent indications parallel to the strike of the epsilon cross-set; and (3) a horizontally bedded argillaceous sand facies up to a few metres thick. The three-fold sequence is interpreted as a single upward-fining cycle of channel sedimentation, the trough cross-bedded sands resulting from channel bottom deposition, the epsilon cross-strata accumulating by lateral accretion of channel point bars, and the upper argillaceous sand representing floodplain sedimentation. Where the McMurray Formation is relatively thin (less than 50 m), virtually the entire formation is commonly composed of a single upward-fining channel deposit.
Details of the size and physiographic setting of the channels are somewhat uncertain, but the present evidence suggests that the epsilon-dominated McMurray Formation sequence in the Athabasca Deposit region represents the coastal plain culmination of a very large fluvial drainage system.  相似文献   

3.
The South Saskatchewan River has a long term average discharge of 275 m3/sec, with flood peaks in the range of 1500 to 3800 m3/sec. South of Saskatoon, the four major types of geomorphological elements recognised are channels, slipface-bounded bars, sand flats and vegetated islands and floodplains. Major channels are 3-5 m deep, up to 200 m wide, and flow around sand flats which are 50-2000 m long, and around vegetated islands up to 1 km long. At areas of flow expansion, long straight-crested cross-channel bars form. During falling stage, a small part of the crest of the cross-channel bar may become emergent, and act as a nucleus for downstream and lateral growth of a new sand flat. The dominant channel bedforms are dunes, which deposit trough cross bedding. Cross-channel bars deposit large sets of planar tabular cross bedding. Sand flats that grow from a nucleus on a cross-channel bar are mostly composed of smaller planar tabular sets, with some parallel lamination, trough cross-bedding, and ripple cross-lamination. A typical facies sequence related to sand flat growth would consist of in-channel trough cross-bedding, overlain by a large (1-2 m) planar tabular set (cross-channel bar), overlain in turn by a complex association mostly of small planar tabular cross-beds, trough cross-beds and ripple cross-lamination. By contrast, a second stratigraphic sequence can be proposed, related only to channel aggradation. It would consist dominantly of trough cross-beds, decreasing in scale upward, and possible interrupted by isolated sets of planar tabular cross-bedding if a cross-channel bar formed, but failed to grow into a sand flat. During final filling of the channel, ripple cross-lamination and thin clay layers may be deposited. In the S. Saskatchewan, these sequences are a minimum of 5 m thick, and are overlain by 0.5-1 m of silty and muddy vertical accretion deposits.  相似文献   

4.
A study reach of the Calamus River, Nebraska Sand Hills, has a low sinuosity (less than 1.3) and braiding parameter (less than 1). Depending on sinuosity, the channel is occupied by alternate bars and point bars, the emergent parts of which form nuclei for midstream bars (islands). Channel migration occurs by bend expansion and translation, downstream and lateral growth of islands, and by chute cutoff. Channel-bed sediment is mainly medium-grained sand, but gravel and coarser sand sizes occur in thalweg areas adjacent to cutbanks and upstream parts of bars and islands, and finer sands occur on the downstream parts of bars and filling channels. Curved-crested dunes cover most of the channel bed at most flow stages, with ripples restricted to shallow areas near banks. Bed material is mostly large-scale cross-stratified, with small-scale cross-strata interbedded with plant debris occurring in topographically high areas near banks. Vibracores through channel bars show a basal erosion surface overlain by large-scale cross-stratified sands, in turn overlain by small-scale cross-stratified sand interbedded with plant debris. The overall sequence generally fines upwards, but the large-scale cross-stratified portion either fines upwards, coarsens upwards, or shows little grain size variation. Lithofacies distributions vary spatially within and between bars depending on position in the bar and local channel curvature/width, in a similar way to unbraided rivers elsewhere. Lithofacies of bar deposits are similar to those in the active channel, and the elevations of the basal erosion surface and adjacent channel thalweg correspond closely. Channels abandoned by chute cutoff are filled progressively from the upstream end, and comprise deposits similar to the downstream parts of bars (i.e. fining upwards). The downstream extremities of channel fills may contain large proportions of peat relative to sand, but little mud due to the paucity of such fine suspended load in the Calamus.  相似文献   

5.
The dynamics of star dunes: an example from the Gran Desierto, Mexico   总被引：9，自引：0，他引：9  
N. LANCASTER 《Sedimentology》1989,36(2):273-289
Observations of patterns of erosion and deposition and surface wind velocity and direction on a 40 m high star dune in the Gran Desierto sand sea indicate that interactions between dune form and airflow as winds change direction seasonally play a major role in the formation of this dune type. Such interactions lead to deposition of sand in the central parts of the dune, giving rise to its pyramidal shape, as well as to some extension of the linear arms. The major arms of the dune studied are oriented NE-SW, or transverse to summer SSE and winter NNW winds. An avalanche face up to 10 m high develops during the course of each season. Flow separation at the main crestline gives rise to a wide zone of lee side secondary flow which moves sand along the base of the avalanche face towards the central part of the dune, where it is deposited as wind ripples migrate into zones of locally reduced flow velocity. Reattachment of the separated flow occurs on the lower part of the N or S arms, parallel to the flow. Spring westerly winds move sand obliquely up the S and N arms of the dune and outwards on the E arm. Large scale flow separation and diversion are replaced by the development of strong helical eddies in the immediate lee of the main crestline which move sand along avalanche faces and into zones of lower flow velocity at the end of dune arms. Formation of star dunes in the Gran Desierto follows a sequence in which crescentic dunes migrating into areas of opposed winds first develop a reversing crestal ridge. Convergent leeside secondary flows are developed, which result in the formation of linear elements parallel to each major wind direction and the concentration of sand in the central part of the dune. Examples of star dunes at different stages of their development can be documented.  相似文献   

6.
The type, scale, and relative abundance of sedimentary structures in four kinds of dunes at White Sands National Monument, New Mexico, were determined by examination of vertical sections on walls of trenches cut through the dunes both in a windward direction and at right angles to this direction. Analysis of cross-stratification in all dunes examined indicated certain common features: sets of cross-strata mostly are medium- to large-scale; nearly all laminae dip downwind at high angles (not uncommonly at 30°-34°); most bounding surfaces between sets of cross-strata are nearly horizontal on the upwind side, but have progressively steeper dips to lee, downwind; and individual sets of cross-strata tend to be thinner and the laminae flatter near the top than at the bottom of a dune in vertical section. Sparse but distinctive structural features that are characteristic of the four types of dunes are varieties of contorted bedding, rare ripple laminae, and either local scour-and-fill bedding, or festoon bedding. Other structures, apparently limited to either one or two types of dunes, are the concave-downward foresets in some parabolic dunes; the low-angle reverse dips of upwind strata on high transverse dunes; and the almost horizontal laminae which represent apparent dip in sections normal to wind direction in dome-shaped and transverse dunes. Describing cross-stratification in terms of three dimensions, dune structure at White Sands consists dominantly of the tabular planar sets, with units thickest near the dune base, thinner above. To a lesser extent the sets are of simple (non-erosion) tabular form and relatively uncommonly, of the trough type. Wedge planar forms are scarce. The planar forms characteristically are of two classes in nearly equal proportions: those in which bounding surfaces are virtually horizontal and those in which they dip at moderate to high degree. A brief comparison is made between the structures of dunes that are characteristic of one effective wind direction, as at White Sands, and certain others formed by winds of two or more directions. Seif dunes of Libya, reversing dunes of the San Luis Valley, Colorado, and star dunes in Saudi Arabia are discussed as examples of complex dunes formed by multi-directional winds.  相似文献   

7.
The continental shelf of the State of Rio Grande do Norte, Brazil, is an open shelf area located 5°S and 35°W. It is influenced by strong oceanic and wind-driven currents, fair weather, 1·5-m-high waves and a mesotidal regime. This work focuses on the character and the controls on the development of suites of carbonate and siliciclastic bedforms, based on Landsat TM image analysis and extensive ground-truth (diving) investigations. Large-scale bedforms consist of: (i) bioclastic (mainly coralline algae and Halimeda) sand ribbons (5–10 km long, 50–600 m wide) parallel to the shoreline; and (ii) very large transverse siliciclastic dunes (3·4 km long on average, 840 m spacing and 3–8 m high), with troughs that grade rapidly into carbonate sands and gravels. Wave ripples are superposed on all large-scale bedforms, and indicate an onshore shelf sediment transport normal to the main sediment transport direction. The occurrence of these large-scale bedforms is primarily determined by the north-westerly flowing residual oceanic and tidal currents, resulting mainly in coast-parallel transport. Models of shelf bedform formation predict sand ribbons to occur in higher energy settings rather than in large dunes. However, in the study area, sand ribbons occur in an area of coarse, low-density and easily transportable bioclastic sands and gravels compared with the very large transverse dunes in an offshore area that is composed of denser medium-grained siliciclastic sands. It suggests that the availability of different sediment types is likely to exert an influence on the nature of the bedforms generated. The offshore sand supply is time limited and originates from sea floor erosion of sandstones of former sea-level lowstands. The trough areas of both sand ribbons and very large transverse dunes comprise coarse calcareous algal gravels that support benthic communities of variable maturity. Diverse mature communities result in sediment stabilization through branching algal growth and binding that is thought to modify the morphology of dunes and sand ribbons. The occurrence and the nature of the bedforms is controlled by their hydrodynamic setting, by grain composition that reflects the geological history of the area and by the carbonate-producing benthic marine communities that inhabit the trough areas.  相似文献   

8.
A Late Precambrian fluvial sandstone sequence in northern Norway is dominated by large-scale cross-sets that show either lenticular or tabular geometries in the streamwise sections. The lenticular sets interdigitate and in places show nearly symmetrical formsets. The tabular sets are in places solitary, but are mainly grouped in cosets. In both cross-set types, the cross-strata range from concave-up to sigmoidal in shape, with the latter variety comprising subhorizontal to gently inclined topset strata (with parting lineation) that merge uninterruptedly downflow into the steeper (10–2°) foresets. Within the cross-sets the geometry and dip azimuths of the foresets are conspicuously consistent, although the concave-up and sigmoidal strata commonly alternate downcurrent. The cross-strata characteristics suggest flood stage deposition from relatively high velocity steady currents heavily laden with suspended sand. Both cross-set types are interpreted as representing bedforms generated by flow in the dune to upper-stage plane-bed transition. The lenticular cross-sets probably represent periodic dunes, but it is far less clear whether the long bedforms represented by the tabular sets should be classified as dunes, or rather as solitary to quasi-periodic bars.  相似文献   

9.
The Late Proterozoic Bakoye 3 Formation is a predominantly aeolian unit deposited in the glacially influenced cratonic Taoudeni Basin of western Africa. The Bakoye 3 can be divided into five distal units, two proximal units, and a local upper massive sandstone. The basal Unit 1 shows a complex interfingering of aeolian and subaqueous structures, and is interpreted as the precursor of the overlying erg sequences. Unit 2 consists of compound, trough cosets of aeolian cross-strata dominated by grain-flow strata. The unit is interpreted to represent draas with superimposed, small, crescentic dunes. A super bounding surface marks the termination and planation of the erg. Unit 3 is distinguished from the underlying Unit 2 by its larger, overall simple sets of trough cross-strata, interpreted to represent simple, large, crescentic dunes. Unit 4 occurs only locally in laterally discontinuous, large troughs. In one case the trough is filled by small sets of tabular cross-strata dominated by grain-flow deposits. At another section, wedges of coarse-grained wind-ripple strata fill the trough. Unit 4 may represent remnants of ergs or, more likely, local deposition in depressions. The depressions, in the latter scenario, formed with the development of a second super surface that truncates Unit 3. Unit 5 consists of very large sets of wind-ripple cross-strata with less common sets of grain-flow deposits. These deposits are believed to represent enormous dunes with large plinths and subordinate slip face development. A third super surface separates Unit 5 from overlying marine deposits. Together, Units 1–5 represent the core of the ergs in a distal position relative to adjacent upland source areas. Proximally, aeolian deposits are simple, smaller, trough sets interpreted as moderate sized crescentic dunes. Coarse-grained braided stream deposits are prominent. Locally, the top of the Bakoye 3 is marked by channelized mass-flow deposits containing aeolian blocks, and is believed to have resulted from iceberg grounding. An overall environment for the Bakoye 3 is one of uplands marked by ice sheets, with outwash plains extending distally to aeolian ergs. Super surfaces, all marked by polygonal fractures and coarsegrained sediment, represent periods of erg termination that may be linked to glacial-fluvial-aeolian cycles.  相似文献   

10.
The Tertiary Tsondab Sandstone Formation, which underlies much of the present Namib Sand Sea, is a key element in understanding the Cenozoic evolution of the Namib Desert. Outcrops of the aeolian facies of the Tsondab Sandstone at Elim and Diep Rivier consist of two sequences of bioturbated cross-strata separated by likely formation-scale surfaces of stabilisation. Cross-strata consist of scalloped sets about 200 m in width and separated by southeast dipping bounding surfaces. Internally, sets contain reactivation surfaces of probable seasonal origin. The north to south-southeast dipping foresets define crescent shapes with a trough axis trending northeast. Although additional data are needed to define the Tsondab bedform, the outcrop data is best satisfied in computer simulations by north trending, east migrating main bedforms, which had relatively large and slow-moving dunes superimposed upon their eastern flanks and migrated to the north. Foresets dipping to the south to south-southwest at Elim suggest that superimposed dunes also occurred on the western flanks of the main bedform and migrated to the south, but that their record was largely lost with net eastward migration of the main bedform. This preliminary Tsondab model shares attributes such as trend, scale of cross-strata, and presence of scalloped sets with reactivation surfaces with computer models of the modern linear dunes in which large-scale sinuosity migrates alongcrest to the north. Differences emerge in the overall set architecture and the orientation of cross-strata and bounding surfaces, as well as the degree of vegetation that must have characterised Tsondab dunes.  相似文献   

11.
Bedform climbing in theory and nature   总被引：7，自引：0，他引：7  
Where bedforms migrate during deposition, they move upward (climb) with respect to the generalized sediment surface. Sediment deposited on each lee slope and not eroded during the passage of a following trough is left behind as a cross-stratified bed. Because sediment is thus transferred from bedforms to underlying strata, bedforms must decrease in cross-sectional area or in number, or both, unless sediment lost from bedforms during deposition is replaced with sediment transported from outside the depositional area. Where sediment is transported solely by downcurrent migration of two-dimensional bedforms, the mean thickness of cross-stratified beds is equal to the decrease in bedform cross-sectional area divided by the migration distance over which that size decrease occurs; where bedforms migrate more than one spacing while depositing cross-strata, bed thickness is only a fraction of bedform height. Equations that describe this depositional process explain the downcurrent decrease in size of tidal sand waves in St Andrew Bay, Florida, and the downwind decrease in size of transverse aeolian dunes on the Oregon coast. Using the same concepts, dunes that deposited the Navajo, De Chelly, and Entrada Sandstones are calculated to have had mean heights between several tens and several hundreds of metres.  相似文献   

12.
This study examines the morphology, sedimentology and genesis of the point bars and floodplain of the Beatton River. The formation of point bars occurs in distinct stages. An initial point bar platform composed mainly of coarse sediment is formed adjacent to the convex bank of a migrating meander bend, and is the base on which develops a single scroll bar of fine traction and suspended load. With continued sedimentation, the scroll bar grows, eventually supporting vegetation and becoming a floodplain ridge. Scroll bars form with greatest size and frequency in rapidly migrating bends, and the shape of the meander bend appears to determine both the location of the initial bar deposit, and its direction of growth up or downstream. Approximately one-half of the floodplain sediment is derived from suspended load, and the initiation of a scroll bar appears to be due to excessive deposition of suspended load in a zone of flow separation over a point bar platform. The critical flow condition for the initiation of a scroll bar does not occur with the same recurrence interval on different shaped meander bends, however, the average recurrence interval within the study reach is approximately every 30 years. Sedimentation rates on point bars and on the floodplain indicate two relatively distinct stages of floodplain alluviation. The most rapid is for surfaces less than 50 years old, although sediment accumulation still persists on surfaces up to 250 years in age. Although frequently flooded, surfaces older than this accumulate very little sediment. Despite 2–3 m of overbank deposition, the amplitude of floodplain ridges is maintained by secondary currents which sweep sediment from the swales towards the ridge crests.  相似文献   

13.
The Hornby Bay Group is a Middle Proterozoic 2.5 km-thick succession of terrestrial siliciclastics overlain by marine siliciclastics and carbonates. A sequence of conglomeratic and arenaceous rocks at the base of the group contains more than 500 m of mature hematitic quartz arenite interpreted to have been deposited by migrating aeolian bedforms. Bedforms and facies patterns of modern aeolian deposits provided a basis for recognizing two sequences of aeolian arenite. Both sequences interfinger with alluvial—wadi fan conglomerates and arenites deposited by braided streams. Depositional processes, facies patterns and paleotopographic position of the arenites are consistent with modern sand sea dynamics.Distal aeolian facies in both sequences are composed of trough crossbed megasets deposited by climbing, sinuous-crested, transverse dunes. Megasets comprise a gradational assemblage of tabular to wedge-planar cosets formed by deflation/reactivation of dune lee slopes and migration of smaller superposed aeolian bedforms (small dunes and wind ripples). Megasets in the proximal facies are thinner, display composite internal stratification and have a tabular-planar geometry which suggests that they were formed by smaller, straight-crested transverse dunes. Most stratification within the crossbeds is inferred to have formed by the downwind climbing of aeolian ripples across the lee slopes of dunes.Remarkably few Precambrian aeolian deposits have been reported previously. This seems anomalous, because most Precambrian fluvial sediments appear to have been deposited by low sinuosity (braided) streams, the emergent parts of which are prime areas for aeolian deflation. Frequent floods and rapid lateral migration of Precambrian humid climate fluvial systems probably restricted aeolianite deposition to arid paleoclimates. Thus the apparent anomaly may reflect non-recognition and/or non-preservation of aeolianites and/or variations in some aspect of sand sea formation and migration unique to the Precambrian. Reconstruction of the Hornby Bay Group aeolianites using recently developed criteria for their recognition suggests that the latter reason did not exert a strong influence.  相似文献   

14.
High-angle stratification (greater than 20°) is produced in several areas of shallow marine sedimentation along the barrier islands of the central Georgia coast. The maximum angle of inclination is 30° which is the angle of repose for the saturated, fine-grained, angular sand of this area. High-angle stratification forms in the following locations: (1) The depositional margin of tidal channel inlets. Under some wave and current conditions, sand accumulates near low tide level and steepens the depositional interface to the angle of repose. (2) The steep face of asymmetrical megaripples developed by tidal currents. Ripples with amplitudes as much as 3 ft. and wave lengths of 20–40 ft. commonly develop in channel inlets and other areas of sand sediments. (3) The steep face of sand waves formed in channel inlets. These large asymmetrical ripples have amplitudes as great as 12 ft. and wave lengths of ca. 300 ft. Lengths along the crests are over 600 ft. (4) The landward side of low bars developed on the beach. Bars and troughs (ridges and runnels) are common on the beaches of this area. The bars, which are as much as 5 ft. high, shift landward by deposition on the steep landward face. (5) The oceanward side of large sand waves at the mouth of offshore tidal channels. Large sand waves are located 6 miles offshore from Doboy Sound inlet in 20–25 ft. of water. The steep face of these asymmetrical sand waves is orientated toward the ocean. Amplitude of these large ripples is as much as 17 ft. and length along the crests is over 1/2 mile.  相似文献   

15.
Dunes that are morphologically of linear type, many of which are probably of longitudinal type in a morphodynamic sense, are common in modern deserts, but their deposits are rarely identified in aeolian sandstones. One reason for non-recognition of such dunes is that they can migrate laterally when they are not exactly parallel to the long-term sand-transport direction, thereby depositing cross-strata that have unimodal cross-bed dip directions and consequently resemble deposits of transverse dunes. Dune-parallel components of sand transport can be recognized in ancient aeolian sands by examining compound cross-bedding formed by small dunes that migrated across the lee slopes of large dunes and documenting that the small dunes migrated with a component in a preferred along-crest direction over the large dunes.  相似文献   

16.
沙丘背风侧气流及其沉积类型与意义   总被引：6，自引：2，他引：6  
哈斯  王贵勇  董光荣 《沉积学报》2001,19(1):96-100,124
在腾格里沙漠东南缘对现代沙丘表面气流、沉积过程的野外观测结果表明,由于区域气流、沙丘形态及其相互作用等的不同使沙丘背风坡气流发生变化,在此发现三种背风坡次生气流 :分离流、附体未偏向流和附体偏向流。前者以弱的反向流为特征多发生在横向气流条件下坡度较陡的背风坡;后二者具有相对高的风速,其中附体流多发生在坡度缓和的背风坡,其方向在横向气流条件下保持原来的方向,而在斜向气流作用下发生偏转且其强度为原始风入射角的余弦函数。根据背风坡气流方向及强度,作者阐述了不同区域气流环境中沙丘背风坡沉积过程、层理类型及特征,探讨了交错层产状与区域气流方向之间的关系.  相似文献   

17.
  相似文献   

18.
In two Proterozoic sandstones, of the Indian shield cross-stratification and cross-lamination are observed to grade continuously into parallel-laminations often bearing parting lineations. These are interpreted as having resulted from a gradual transition from ripple/dune to upper stage plane bed structures. During the transition the inclination of the cross-strata diminishes and their shape changes from concave-up to sigmoidal. The sigmoidal cross-strata are characterized by well defined topsets, foresets and toesets and the topsets bear parting lineations. In the course of the transition sigmoidal cross-strata may give way either to horizontal parallel-lamination or inclined parallel-lamination. In the former the toesets of the successive sigmoidal cross-strata thicken and the thickness of the cross-strata beyond the brink point (the junction between the topset and foreset) tends to become uniform until a plane-bed state is reached and horizontal parallel-laminations are formed. In the latter the topset of the successive sigmoidal cross-strata increases in length at the expense of the foreset and toeset until the brink point ceases to exist so that only the topset laminations prevail and appear as inclined parallel-laminations. These transitions presumably result from a gradual increase in flow intensity beyond the stability limits of ripples/dunes. The progressive morphological changes of the cross-stratification over the transition are attributed to changing fallout patterns on the lee face of the bedforms in response to increasing flow intensity. Preservation of the records of such transitions suggests an abundant supply of sand grade sediments from suspension during the transition, shaping the sediment concentration profile over the bedforms and facilitating turbulence suppression. The variation in the pattern of transition from sigmoidal cross-stratification to parallel-lamination may be the result of different rates of sediment feed from the prevailing suspended sediment load in the two instances.  相似文献   

19.
A range of large-scale dunes of oolitic calcarenite composition are exposed in the Corinth Basin of central Greece. These transverse dunes and a very large linear dune (> 15 m high) lie within an Upper Pleistocene, transgressive marine sequence. Tidal flow, accelerated by constriction through a narrow, fault-bounded seaway, is interpreted to have generated the current velocities necessary to produce the dunes. Marine facies in the Upper Pleistocene sequence include beach to offshore conglomerates and sandstones with wave-modified sedimentary structures and herringbone cross-stratification. An offshore facies association comprises variably bioturbated siltstones and sandstones with a varied marine fauna that includes thermophile species such as scleractinian corals and Strombus bubonius. Oolitic sandstone facies also occur. Oolitic sands were apparently produced in shoal environments subject to tidal (and wave) action, and transported by dominant southerly currents over the southern part of the basin. Oolites accumulated in a linear dune 2.7 km long and 15–20 m high and in three-dimensional transverse dunes up to 10 m high having a variety of compound and simple internal geometries. The isolated, WSW-ENE-trending linear form exhibits angle of repose sedimentary dips (up to 35°) of avalanche sets on its SE flank and sets typically with dips of 15–20° to the NW. Internal high-angle discontinuities are developed in the SE-dipping lee face. It is proposed that a dominant north-to-south flow crossed over the crest obliquely, resulting in both net erosional and depositional processes on the lee flank. A subordinate (?tidal) current may have locally and or periodically crossed the dune crest in a westwards direction. A string of transverse dunes, which were located adjacent to a fault/marine terrace scarp, is interpreted to have originally coalesced to form the linear dune. The distribution of transverse and linear dunes together with the palaeogeographical reconstruction suggest that a marine connection periodically existed across the Corinth Isthmus during the Late Pleistocene due to a combination of active faulting and glacio-eustatic highstands of sea level.  相似文献   

20.
Three genetically distinct size classes of lower regime transverse bedforms have long been known from laboratory studies, and from studies of the intertidal zone; ripples, megaripples, and sand waves. These features are also present on the subtidal shelf surface of the Middle Atlantic Bight, and their distribution in time and space allows us to draw inferences concerning the time and space pattern of sediment transport. Transverse bedforms in the Middle Atlantic Bight occur in response to tidal flows at estuary and inlet mouths and on tide-dominated banks; on the shelf surface, however, they are primarily responses to wind-driven flows. Ripples are the most widespread of the three classes. They are current-formed during peak storm flows, but are probably remade as oscillatory wave ripples as the flow wanes. Megaripples are found primarily on the inner shelf, also as responses to peak storm flows. Sand waves of several metres amplitude occur on the inner shelf in the vicinity of topographic highs; low amplitude sand waves (< 2m), solitary or in trains, are widespread on the inner shelf. They survive through many seasons of storm flows. Megaripples are especially interesting as records of specific flow events. They are widespread on the inner shelf during the winter, occurring in fields up to several kilometres in diameter. On a portion of the Long Island inner shelf during December 1976, megaripple fields covered approximately 15% of the shelf surface. They tend to be erased during the succeeding summer months. Both megaripples (short-term response elements) and sand waves (long-term response elements) indicate that sand transport in the Middle Atlantic Bight is directed to the southeast, parallel with the regional trend of the isobaths.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号