首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
This study considers the effects of heat transfer and fluid flow on the thernal, hydrologic, and mechanical response of a fault surface during seismic failure. Numerical modeling techniques are used to account for the coupling of the thermal, fluid-pressure, and stress fields. Results indicate that during an earthquake the failure surface is heated to a tempeature required for the thermal expansion of pore fluids to balance the rate of fluid loss due to flow and the fluid-volume changes due to pore dilatation. Once this condition is established, the pore fluids pressurize and the shear strength decreases rapidly to a value sufficient to maintain the thermal pressurization of pore fluids at near-lithostatic values. If the initial fluid pressure is hydrostatic, the final temperature attained on the failure surface will increase with depth, because a greater pressure increase can occur before a near-lithostatic pressure is reached. The rate at which thermal pressurization proceeds depends primarily on the hydraulic characteristics of the surrounding porous medium, the coefficient of friction on the fault surface, and the slip velocity. If either the permeability exceeds 10–15 m2 or the porous medium compressibility exceeds 10–8 Pa–1, then frictional melting may occur on the fault surface before thermal pressurization becomes significant. If the coefficient of friction is less than 10–1 and if the slip velocity is less than 10–2 msec–1, then it is doubtful that either thermal pressurization or frictional melting on the fault surface could cause a reduction in the dynamic shear strength of a fault during an earthquake event.  相似文献   

2.
The relation of magma and crustal activity has been studied from spatial distribution of 3He/4He ratios of gas and/or water samples over the Izu Peninsula, where significant crustal deformation associated with seismic swarm activities has been observed since 1970s. The air-corrected values of 3He/4He ratios ranged from 3.5 to 8.2 RA, where RA is the atmospheric 3He/4He ratio = 1.4 × 10? 6, indicating that helium is mostly of magmatic origin. Among the three pressure sources proposed to explain the crustal deformation, two inflation sources beneath the inland of northeast and the mid east coast of the Izu Peninsula locate in the broad distribution of high 3He/4He ratios, which supports relation of magma to the crustal uplift. In contrast, the distribution of 3He/4He ratios around the tensile fault assumed in the area of seismic swarms appears not to indicate existence of significant amount of magma below the tensile fault. Alternatively, the results suggest magma below a point several kilometers south of the tensile fault. The seismic swarms are explained either by fluid pressurization of thermal water heated by this magma or by intrusion of magma to the tensile fault moved obliquely from the deep magma reservoir.  相似文献   

3.
We invert measurements of coseismic displacements from 139 continuously recorded GPS sites from the 2010, Jiashian, Taiwan earthquake to solve for fault geometry and slip distribution using an elastic uniform stress drop inversion. The earthquake occurred at a depth of ~ 23 km in an area between the Western Foothills fold-and-thrust belt and the crystalline high mountains of the Central Range, providing an opportunity to examine the deep fault structure under Taiwan. The inferred rupture plane is oblique to the prominent orientation of thrust faults and parallel to several previously recognized NW-striking transfer zones that appear to connect stepping thrusts. We find that a fault striking 318°–344° with dip of 26°–41° fits the observations well with oblique reverse-sinistral slip under a low stress drop of about 0.5 MPa. The derived geodetic moment of 2.92 × 1018 N-m is equivalent to a Mw = 6.24 earthquake. Coseismic slip is largely concentrated within a circular patch with a 10-km radius at the depth between 10 and 24 km and maximum slip of 190 mm. We suggest this earthquake ruptured the NW-striking Chishan transfer fault zone, which we interpret as a listric NE-dipping lateral ramp with oblique slip connecting stepping thrust faults (ramps). The inferred slip on the lateral ramp is considerably deeper than the 7–15 km deep detachment identified in previous studies of western Taiwan. We infer an active basal detachment under western Taiwan at a depth of at least ~ 20–23 km based on these inversion results. The earthquake may have nucleated at the base of the lateral ramp near the intersection with the basal detachment. Coulomb stress change calculations suggest that this earthquake moved several NE-striking active thrust faults in western Taiwan nearer to failure.  相似文献   

4.
Fourier transform infrared (FTIR) microanalysis of pseudotachylytes (i.e. friction-induced melts produced by seismic slip) from the Nojima fault (Japan) reveals that earthquakes almost instantaneously expel 99 wt.% of the wall rock CO2 content. Carbon is exsolved because it is supersaturated in the friction melts. By extrapolation to a crustal-scale fault rupture, large events such as the M7.2 Kobe earthquake (1995) may yield a total production of 1.8 to 3.4 × 103 tons CO2 within a few seconds. This extraordinary release of CO2 can cause a flash fluid pressure increase in the fault plane, and therefore enhance earthquake slip or trigger aftershocks; it may also explain the anomalous discharge of carbon monitored in nearby fault springs after large earthquakes. Because carbon saturation in silicate melts is pressure-dependent, FTIR can be used as a new tool to constrain the maximum depth of pseudotachylyte formation in exhumed faults.  相似文献   

5.
《Continental Shelf Research》1999,19(14):1833-1848
A well-defined front in temperature and salinity separates the stratified Clyde Sea water from the vertically well mixed water of the North Channel. The detailed structure of the front was observed in autumn 1990 by a combination of, repeated crossings of the front using a ship-borne ADCP and a towed undulating CTD system, and the deployment of a fixed mooring system with temperature, salinity and velocity sensors for a period of 12 days. The results show that the front was situated on the Great Plateau near a contour of log10(H/U32)=2.7∼3.7 where H is the water depth and U2 the amplitude of M2 tidal velocity. The temperature structure in the Clyde Sea was inverted and the Clyde Sea surface temperature was lower than that of the vertically well mixed water in the North Channel. Since the salinity gradient was stronger than the temperature gradient with fresher water on the surface, the density structure was predominantly controlled by salinity. There were indications of warm and saline bottom water upwelling on the mixed side of the front during spring tides. This upwelling disappeared and the salinity and temperature structure at the front was more diffuse during the neap tide period. A jet-like along-front residual current was observed flowing to the northwest in the surface layer with a counter flow to the southeast in the bottom layer. The vertical difference in velocity was about 9 cm s−1 and was approximately consistent with the shear determined from the thermal wind relation. Both cross- and along-front components of the current observed at the mooring station varied in response to the advection of the front, although both components had large variations with periods of less than one day and several days. The front was advected past the mooring system by a mean flow from the North Channel to the inner basin, while oscillating 3–5 km back and forth with the tidal currents. From the velocity at a current meter mooring and CTD data, the front was estimated to have moved up to 20 km during the observational period and the cross frontal velocity was inferred to be 3–4 cm s−1.  相似文献   

6.
We used GPS velocities from approximately 700 stations in western China to study the crustal deformation before the Wenchuan MS8.0 earthquake. The processing methods included analyses of the strain rate field, inversion of fault locking and the GPS velocity profiles. The GPS strain rate in the E-W direction in the Qinghai-Tibet block shows that extensional deformation was dominant in the western region of the block (west of 92.5° E), while compressive deformation predominated in the eastern region of the block (from 92.5° E to 100° E). On a regional scale, the hypocentral region of the Wenchuan earthquake was located at the edge of an intense compression deformation zone of about 1.9 × 10−8/a in an east-west direction. The characteristic deformation in the seismogenic fault was compressive with a dextral component. The compression deformation rate was greater in the fault's western region than in its eastern region, and the strain accumulation was very slow on the fault scale. The results of a fault locking inversion show that the locking fraction and slip deficit was greater in the middle-northern section of the seismogenic fault than in the southern section. The GPS velocity profile before the Wenchuan earthquake shows that the compression deformation was smaller than the dextral deformation, which is asymmetrical with respect to the distribution of co-seismic displacement. These deformation characteristics should provide some clues to the Wenchuan earthquake which occurred in the later period of the earthquake cycle.  相似文献   

7.
We present new space geodetic data indicating that the present slip rate on the Hunter Mountain–Panamint Valley fault zone in Eastern California (5.0 ± 0.5 mm/yr) is significantly faster than geologic estimates based on fault total offset and inception time. We interpret this discrepancy as evidence for an accelerating fault and propose a new model for fault initiation and evolution. In this model, fault slip rate initially increases with time; hence geologic estimates averaged over the early stages of the fault's activity will tend to underestimate the present-day rate. The model is based on geologic data (total offset and fault initiation time) and geodetic data (present day slip rate). The model assumes a monotonic increase in slip rate with time as the fault matures and straightens. The rate increase follows a simple Rayleigh cumulative distribution. Integrating the rate-time path from fault inception to present-day gives the total fault offset.  相似文献   

8.
The brittle/ductile transition is a major rheologic boundary in the crust yet little is known about how or if rates of tectonic processes are influenced by this boundary. In this study we examine the slip history of the large-scale Naxos/Paros extensional fault system (NPEFS), Cyclades, Greece, by comparing published slip rates for the ductile crust with new thermochronological constraints on slip rates in the brittle regime. Based on apatite and zircon fission-track (AFT and ZFT) and (U–Th)/He dating we observe variable slip rates across the brittle/ductile transition on Naxos. ZFT and AFT ages range from 11.8 ± 0.8 to 9.7 ± 0.8 Ma and 11.2 ± 1.6 to 8.2 ± 1.2 Ma and (U–Th)/He zircon and apatite ages are between 10.4 ± 0.4 to 9.2 ± 0.3 Ma and 10.7 ± 1.0 to 8.9 ± 0.6 Ma, respectively. On Paros, ZFT and AFT ages range from 13.1 ± 1.4 Ma to 11.1 ± 1.0 Ma and 12.7 ± 2.8 Ma to 10.5 ± 2.0 Ma while the (U–Th)/He zircon ages are slightly younger between 8.3 ± 0.4 Ma and 9.8 ± 0.3 Ma. All ages consistently decrease northwards in the direction of hanging wall transport. Most of our new thermochronological results and associated thermal modeling more strongly support the scenario of an identical fault dip and a constant or slightly accelerating slip rate of ∼ 6–8 km Myr− 1 on the NPEFS across the brittle/ductile transition. Even the intrusion of a large granodiorite body into the narrowing fault zone at ∼ 12 Ma on Naxos does not seem to have affected the thermal structure of the area in a way that would significantly disturb the slip rate. The data also show that the NPEFS accomplished a minimum total offset of ∼ 50 km between ∼ 16 and 8 Ma.  相似文献   

9.
Patterns in fault slip rates through time and space are examined across the transition from the Sierra Nevada to the Eastern California Shear Zone–Walker Lane belt. At each of four sites along the eastern Sierra Nevada frontal fault zone between 38 and 39° N latitude, geomorphic markers, such as glacial moraines and outwash terraces, are displaced by a suite of range-front normal faults. Using geomorphic mapping, surveying, and 10Be surface exposure dating, mean fault slip rates are defined, and by utilizing markers of different ages (generally, ~ 20 ka and ~ 150 ka), rates through time and interactions among multiple faults are examined over 104–105 year timescales.At each site for which data are available for the last ~ 150 ky, mean slip rates across the Sierra Nevada frontal fault zone have probably not varied by more than a factor of two over time spans equal to half of the total time interval (~ 20 ky and ~ 150 ky timescales): 0.3 ± 0.1 mm year? 1 (mode and 95% CI) at both Buckeye Creek in the Bridgeport basin and Sonora Junction; and 0.4 + 0.3/?0.1 mm year? 1 along the West Fork of the Carson River at Woodfords. Data permit rates that are relatively constant over the time scales examined. In contrast, slip rates are highly variable in space over the last ~ 20 ky. Slip rates decrease by a factor of 3–5 northward over a distance of ~ 20 km between the northern Mono Basin (1.3 + 0.6/?0.3 mm year? 1 at Lundy Canyon site) to the Bridgeport Basin (0.3 ± 0.1 mm year? 1). The 3-fold decrease in the slip rate on the Sierra Nevada frontal fault zone northward from Mono Basin is indicative of a change in the character of faulting north of the Mina Deflection as extension is transferred eastward onto normal faults between the Sierra Nevada and Walker Lane belt.A compilation of regional deformation rates reveals that the spatial pattern of extension rates changes along strike of the Eastern California Shear Zone-Walker Lane belt. South of the Mina Deflection, extension is accommodated within a diffuse zone of normal and oblique faults, with extension rates increasing northward on the Fish Lake Valley fault. Where faults of the Eastern California Shear Zone terminate northward into the Mina Deflection, extension rates increase northward along the Sierra Nevada frontal fault zone to ~ 0.7 mm year? 1 in northern Mono Basin. This spatial pattern suggests that extension is transferred from more easterly fault systems, e.g., Fish Lake Valley fault, and localized on the Sierra Nevada frontal fault zone as the Eastern California Shear Zone–Walker Lane belt faulting is transferred through the Mina Deflection.  相似文献   

10.
Although offset and age data from displaced landforms are essential for identifying earthquake clusters and thus testing whether faults slip at uniform or secularly varying rates, it is not clear how the uncertainties in such measurements should be propagated so as to yield a robust fault-slip history (i.e., record of fault displacement over time). Here we develop a Monte Carlo approach for estimating the distribution of geologically reasonable fault-slip histories that fit the offset and age data from a population of dated and displaced landforms. The model assumes that the landforms share common faulting histories, the offset and age constraints are correct, and the fault has not reversed shear sense. Analysis of the model results yields both a precise average slip rate, in the case where a linear fit is applied to the data, and a best-fit fault-slip history, in the case where the linear constraint is removed. The method can be used to test for secular variation in slip because the uncertainty on this best-fit history is quantified. By applying the method to previously published morphochronologic data from faulted late Quaternary terrace risers along the Kunlun fault in China and the Awatere fault in New Zealand, we have assessed the extent to which our modeled average slip rates match previously reported values and the data support previous interpretations of uniform slip rate. The Kunlun data set yields average slip rates of 8.7 + 3.6/?2.1 mm/yr and 5.1 + 1.6/?1.2 mm/yr (68.27% confidence), for the central and eastern reaches of the fault, respectively, both of which match previously published slip rates. Our analysis further indicates that these fault reaches have both slipped uniformly over the latest Quaternary. In contrast, analysis of data from the Saxton River site along the Awatere fault reveals a mid-Holocene deceleration in slip rate from 6.2 + 1.6/?1.4 mm/yr to 2.8 + 1.0/?0.6 mm/yr. This result contradicts previous interpretations of uniform slip along the Awatere fault. The Monte Carlo method we present here for quantifying fault-slip histories using the offset and age data from a population of faulted landforms provides an important tool for distinguishing temporally uniform from secularly varying fault slip.  相似文献   

11.
It is understood that sample size could be an issue in earthquake statistical studies, causing the best estimate being too deterministic or less representative derived from limited statistics from observation. Like many Bayesian analyses and estimates, this study shows another novel application of the Bayesian approach to earthquake engineering, using prior data to help compensate the limited observation for the target problem to estimate the magnitude of the recurring Meishan earthquake in central Taiwan. With the Bayesian algorithms developed, the Bayesian analysis suggests that the next major event induced by the Meishan fault in central Taiwan should be in Mw 6.44±0.33, based on one magnitude observation of Mw 6.4 from the last event, along with the prior data including fault length of 14 km, rupture width of 15 km, rupture area of 216 km2, average displacement of 0.7 m, slip rate of 6 mm/yr, and five earthquake empirical models.  相似文献   

12.
Many volcanic edifices are subject to flank failure, usually produced by a combination of events, rather than any single process. From a dynamic point of view, the cause of collapse can be divided into factors that contribute to an increase in shear stress, and factors that contribute to the reduction in the friction coefficient μ of a potential basal failure plane. We study the potential for flank failure at Mount Etna considering a schematic section of the eastern flank, approximated by a wedge-like block. For such geometry, we perform a (steady state) limit equilibrium analysis: the resolution of the forces parallel to the possible basal failure plane allows us to determine the total force acting on the potentially unstable wedge. An estimate of the relative strength of these forces suggests that, in first approximation, the stability is controlled primarily by the balance between block weight, lithostatic load and magmatic forces. Any other force (sea load, hydrostatic uplift, and the uplift due to mechanical and thermal pore-fluid pressure) may be considered of second order. To study the model sensitivity, we let the inferred slope α of the basal surface failure vary between ?10° and 10°, and consider three possible scenarios: no magma loading, magmastatic load, and magmastatic load with magma overpressure. We use error propagation to include in our analysis the uncertainties in the estimates of the mechanics and geometrical parameters controlling the block equilibrium. When there is no magma loading, the ratio between destabilizing and stabilizing forces is usually smaller than the coefficient of friction of the basal failure plane. In the absence of an initiating mechanism, and with the nominal values of the coefficient of friction μ = 0.7 ± 0.1 proposed, the representative wedge will remain stable or continue to move at constant speed. In presence of magmastatic forces, the influence of the lateral restraint decreases. If we consider the magmastatic load only, the block will remain stable (or continue to move at constant speed), unless the transient mechanical and thermal pressurization significantly decrease the friction coefficient, increasing the instability of the flank wedge for α > 5° (seaward dipping decollement). When the magma overpressure contribution is included in the equilibrium analysis, the ratio between destabilizing and stabilizing forces is of the same order or larger than the coefficient of friction of the basal failure plane, and the block will become unstable (or accelerate), especially in the case of the reduction in friction coefficient. Finally, our work suggests that the major challenge in studying flank instability at Mount Etna is not the lack of an appropriate physical model, but the limited knowledge of the mechanical and geometrical parameters describing the block equilibrium.  相似文献   

13.
《Journal of Geodynamics》2008,46(4-5):163-168
The reactivation of the Chelungpu fault triggered the 20 September 1999 Chi-Chi Taiwan earthquake (Mw = 7.6) which caused a 100-km long surface rupture that trends north–south. We reconstruct the fault geometry using 1068 planar triangular dislocation elements that approximate more realistically the curved three-dimensional fault surface. The fault slip distribution is then determined with the observed GPS coseismic displacements as well as interferometric synthetic aperture radar (InSAR) data. The results show that our smooth 3D fault slip model has improved the fit to the geodetic data by 44% compared with the previously published inversions. The slip distribution obtained both by inversion of GPS data only and by joint inversion of GPS and InSAR data indicates that notable slips occur on the sub-horizontal décollement at the depth of 6.1–8.9 km.  相似文献   

14.
We analyzed records of eight seismic stations of the autonomous broadband seismograph network of a joint project between Utrecht University (the Netherlands), California Institute of Technology, and Centro de Investigación Científica y de Estudios Superiores de Ensenada (CICESE). These stations recorded the Mw 5.6 earthquake that occurred on 12 November 2003 at Salsipuedes basin in the middle of the Gulf of California 2 km west of the island Angel de la Guarda. This event was located at 29.16º N and 113.37º W, 30 km northeast of Bahia de los Angeles. A foreshock and hundreds of aftershocks were recorded in the 48 hours after its origin time. With the location of 29 earthquakes we identified the active segment, perpendicular to the main transform fault NW–SE of Canal de Ballenas, representing the transtensional boundary between the Pacific and North American plates. The direction of the active fault described is consistent with the normal fault mechanism reported by the National Earthquake Information Center (strike=39º, dip=34º, slip=–44º).From the duration magnitude of 456 aftershocks, we calculated a b-value of 1.14±0.28; furthermore, we calculated a seismic moment of (3.5 ±3.3) X1017Nm, a source radius of 3.7 ± 2.63 km, and a static stress drop of 3.94 ± 1.15 MPa (39.4 ± 11.5 bar.).  相似文献   

15.
Wind-driven processes exert an important impact on aquatic ecosystems, especially on shallow reservoirs. Flow and heat transport under wind in the Douhe reservoir in China were simulated by a two-dimensional mathematical model. Areas corresponding to different temperature rises were calculated for different wind speed conditions with high frequency. It is shown that high temperature rise areas increase for maximum wind speed conditions while low temperature rise areas keep constant for various wind speed conditions. The concentration of Chl.a decreases with the increase of wind speed, indicating that low wind speed is suitable for algae blooming in the Douhe reservoir. The effects of wind on Bacillariophyta biomass growth become more obvious with the increase of temperature rise areas. The influenced areas of lower temperature rise (0.2–1.49 °C) and higher temperature rise (1.5–2 °C) zone are 8.57 × 106 m2 and 5.18 × 106 m2, respectively, and corresponding total variation amounts of Bacillariophyta biomass are 2.24 × 105/m2 and 0.42 × 105/m2, respectively. Results show that wind has a significant impact on ecological effects due to thermal discharge from thermal power plant into shallow reservoirs.  相似文献   

16.
A probabilistic modeling is used to analyze the spatio-temporal behavior of eleven aftershock sequences occurred in South and Southeastern Spain. This study focuses on the analysis of two seismicity parameters: the b-value of the frequency-magnitude distribution, and the p-value, explaining the temporal decay rate of aftershocks. The estimated b values range between 0.77 ± 0.05 and 1.18 ± 0.10 close to the typical b-values of the aftershock frequency-magnitude relationship b ≈ 1.0. The estimated p-values range between 0.75 ± 0.03 and 1.43 ± 0.10 showing broad regimes of the temporal decay of aftershocks. The modified Bath’s law used to analyze the energy partitioning, suggests that a large fraction of the accumulated energy is released in the mainshock and relatively small fraction of energy is released during aftershock sequence, for example 80% of the total energy is released during the Mula 1999 mainshock, 88% during Bullas 2002 mainshock and 87% during La Paca 2005 mainshock. The fractal dimension D2 is estimated using the correlation integral, and then used to derive the slip ratio, as the ratio of the slip occurred on primary fault segment to the total slip. For example, we obtained a slip ratio equal to 71% for the Mula 1999 aftershock sequence, 61% for the Bullas 2002 event, 58% for the La Paca 2005 aftershock, 50% for the Lorca 2011 sequence and 63% for the sequence triggered by the Gador 2002 mainshock.Finally, the correlations between the fractal dimension, the b-value and the p-value is analyzed, and the Aki’s relation D = 3b/c is discussed as well.  相似文献   

17.
GPS data from Crustal Movement Observation Network of China (CMONOC) are used to derive far-field co-seismic displacements induced by the Mw 9.0 Tohoku Earthquake. Significant horizontal displacements about 30 mm, 10 mm, and 20 mm were caused by this large event in northeast China, north China, and on the Korean peninsula respectively. Vectors of relatively large horizontal displacements with dominant east components pointed to the epicenter of this earthquake. The east components show an exponential decay with the longitude, which is characteristic of the decay of the co-seismic horizontal displacements associated with earthquakes of thrust rupture. The exponential fit of the east components shows that the influence of the co-seismic displacements can be detected by GPS at a distance of about 3200 km from the epicenter of the earthquake. By considering the capability of the far field displacements for constraining the inversion of the fault slip model of the earthquake, we use spherically stratified Earth models to simulate the co-seismic displacements induced by this event. Using computations and comparisons, we discuss the effects of parameters of layered Earth models on the results of dislocation modeling. Comparisons of the modeled and observed displacements show that far field GPS observations are effective for constraining the fault slip model. The far field horizontal displacements observed by GPS are used to modify the slips and seismic moments of fault slip models. The result of this work is applicable as a reference for other researchers to study seismic source rupture and crustal deformation.  相似文献   

18.
《Journal of Geodynamics》2011,51(5):424-440
This study presents geochemical and fabric analysis of coarse-grained, porphyroclastic and mylonitic spinel peridotite xenoliths derived from the shallow subcontinental lithospheric mantle of Jeju Island (South Korea). Fabric analysis of olivines in the studied peridotites shows activation of the high temperature (0 1 0)[1 0 0] slip system; however, in the porphyroclastic and mylonitic peridotites, activation of (0 k l)[1 0 0] slip system results in a weaker fabric. Formation of porphyroclastic and mylonitic fabrics are thought to form in a shear-dominated environment. The results of the trace element analysis reveal that the smaller the grain size and weaker the fabric, the more enriched in LREE and HFSE are the peridotites, which indicates a strong relationship between metasomatic agents and mantle shear zones.  相似文献   

19.
With transmission electron microscopy (TEM) we observed nanometer-sized pores in four ultracataclastic and fractured core samples recovered from different depths of the main bore hole of the San Andreas Fault Observatory at Depth (SAFOD). Cutting of foils with a focused ion beam technique (FIB) allowed identifying porosity down to the nm scale. Between 40 and 50% of all pores could be identified as in-situ pores without any damage related to sample preparation. The total porosity estimated from TEM micrographs (1–5%) is comparable to the connected fault rock porosity (2.8–6.7%) estimated by pressure-induced injection of mercury. Permeability estimates for cataclastic fault rocks are 10? 21–10? 19 m2 and 10? 17 m2 for the fractured fault rock. Porosity and permeability are independent of sample depth. TEM images reveal that the porosity is intimately linked to fault rock composition and associated with deformation. The TEM-estimated porosity of the samples increases with increasing clay content. The highest porosity was estimated in the vicinity of an active fault trace. The largest pores with an equivalent radius > 200 nm occur around large quartz and feldspar grains or grain-fragments while the smallest pores (equivalent radius < 50 nm) are typically observed in the extremely fine-grained matrix (grain size < 1 μm). Based on pore morphology we distinguish different pore types varying with fault rock fabric and alteration. The pores were probably filled with formation water and/or hydrothermal fluids at elevated pore fluid pressure, preventing pore collapse. The pore geometry derived from TEM observations and BET (Brunauer, Emmett and Teller) gas adsorption/desorption hysteresis curves indicates pore blocking effects in the fine-grained matrix. Observations of isolated pores in TEM micrographs and high pore body to pore throat ratios inferred from mercury injection suggest elevated pore fluid pressure in the low permeability cataclasites, reducing shear strength of the fault.  相似文献   

20.
Modeling of multimode surface wave group velocity dispersion data sampling the eastern and the western Ganga basins, reveals a three layer crust with an average Vs of 3.7 km s?1, draped by ～2.5 km foreland sediments. The Moho is at a depth of 43 ± 2 km and 41 ± 2 km beneath the eastern and the western Ganga basins respectively. Crustal Vp/Vs shows a felsic upper and middle crust beneath the eastern Ganga basin (1.70) compared to a more mafic western Ganga basin crust (1.77). Due to higher radiogenic heat production in felsic than mafic rocks, a lateral thermal heterogeneity will be present in the foreland basin crust. This heterogeneity had been previously observed in the north Indian Shield immediately south of the foreland basin and must also continue northward below the Himalaya. The high heat producing felsic crust, underthrust below the Himalayas could be an important cause for melting of midcrustal rocks and emplacement of leucogranites. This is a plausible explanation for abundance of leucogranites in the east-central Himalaya compared to the west. The uppermost mantle Vs is also significantly lower beneath the eastern Ganga basin (4.30 km s?1) compared to the west (4.44 km s?1).  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号