Total individual ion activity coefficients of calcium and carbonate in seawater at 25°C and 35%. salinity,and implications to the agreement between apparent and thermodynamic constants of calcite and aragonite     

L.Niel Plummer  Eric T. Sundquist 《Geochimica et cosmochimica acta》1982,46(2):247-258

We have calculated the total individual ion activity coefficients of carbonate and calcium, and , in seawater. Using the ratios of stoichiometric and thermodynamic constants of carbonic acid dissociation and total mean activity coefficient data measured in seawater, we have obtained values which differ significantly from those widely accepted in the literature. In seawater at 25°C and 35%. salinity the (molal) values of and are $\text{0.038 ± 0.002}$ and $\text{0.173 ± 0.010}$, respectively. These values of and are independent of liquid junction errors and internally consistent with the value . By defining and on a common scale (), the product is independent of the assigned value of and may be determined directly from thermodynamic measurements in seawater. Using the value and new thermodynamic equilibrium constants for calcite and aragonite, we show that the apparent constants of calcite and aragonite are consistent with the thermodynamic equilibrium constants at 25°C and 35%. salinity. The demonstrated consistency between thermodynamic and apparent constants of calcite and aragonite does not support a hypothesis of stable Mg-calcite coatings on calcite or aragonite surfaces in seawater, and suggests that the calcite critical carbonate ion curve of Broecker and Takahashi (1978, Deep-Sea Research25, 65–95) defines the calcite equilibrium boundary in the oceans, within the uncertainty of the data.  相似文献   

Kinetic and thermodynamic factors controlling the distribution of SO₃²⁻ and Na⁺ in calcites and selected aragonites     

Eurybiades Busenberg  L. Niel Plummer 《Geochimica et cosmochimica acta》1985,49(3):713-725

Significant amounts of SO₄^2?, Na⁺, and OH^? are incorporated in marine biogenic calcites. Biogenic high Mg-calcites average about 1 mole percent SO₄^2?. Aragonites and most biogenic low Mg-calcites contain significant amounts of Na⁺, but very low concentrations of SO₄^2?. The SO₄^2? content of non-biogenic calcites and aragonites investigated was below 100 ppm. The presence of Na⁺ and SO₄^2? increases the unit cell size of calcites. The solid-solutions show a solubility minimum at about 0.5 mole percent SO₄^2? beyond which the solubility rapidly increases. The solubility product of calcites containing 3 mole percent SO₄^2? is the same as that of aragonite. Na⁺ appears to have very little effect on the solubility product of calcites. The amounts of Na⁺ and SO₄^2? incorporated in calcites vary as a function of the rate of crystal growth. The variation of the distribution coefficient ($\text{D}$) of SO₄^2? in calcite at 25.0°C and 0.50 molal NaCl is described by the equation $\text{D = k}{}_0\text{+ k}{}_1\text{R}$ where $\text{k}{}_0$ and $\text{k}{}_1$ are constants equal to $\text{6.16 × 10}{}^{\mathrm{?6}}$ and $\text{3.941 × 10}{}^{\mathrm{?6}}$, respectively, and $\text{R}$ is the rate of crystal growth of calcite in mg·min^?1·g^?1 of seed. The data on Na⁺ are consistent with the hypothesis that a significant amount of Na⁺ occupies interstitial positions in the calcite structure. The distribution of Na⁺ follows a Freundlich isotherm and not the Berthelot-Nernst distribution law. The numerical value of the Na⁺ distribution coefficient in calcite is probably dependent on the number of defects in the calcite structure. The Na⁺ contents of calcites are not very accurate indicators of environmental salinities.  相似文献   

Experimental observations on carbon isotope exchange in carbonate-water systems     

A.A. Mozeto  P. Fritz  E.J. Reardon 《Geochimica et cosmochimica acta》1984,48(3):495-504

This study presents data from experiments investigating carbon isotope exchange between carbonate solution and solid calcite using carbon-13 as a tracer. All experiments were done with calcite saturated solutions and results show that a two-step adsorption-recrystallization reaction takes place. Isotope effects are caused by exchange by carbonate on the solid surface with carbon in the aqueous phase. Adsorption reactions are characterized by a maximum isotopic exchange capacity (IEC) on crystal surfaces of about 10¹¹ reaction sites per cm², following a second order rate law with respect to ¹³C concentration in solution ($\text{constant}\text{kex ? 10}{}^6\text{cm}{}^5\text{mole}{}^{\mathrm{?1}}\text{s}{}^{\mathrm{?1}}$ and $\text{half-life}\text{t}{}_{\mathrm{<mtext>1</mtext><mtext>2</mtext>}}\text{= 700}\text{s}$). The adsorption reaction was followed by a first order recrystallization which is characterized by a rate constant of the order of 10^?8 s^?1 and a $\text{t}{}_{\mathrm{<mtext>1</mtext><mtext>2</mtext>}}$ of 10⁷ s. Negative isotopic gradient experiments and runs with calcite crystals in Mg²⁺ spiked solutions provided the preliminary basis for the characterization of the mechanisms of both proposed reactions.  相似文献   

The dissolution kinetics of biogenic calcium carbonates in seawater     

Robin S. Keir 《Geochimica et cosmochimica acta》1980,44(2):241-252

Dissolution rate as a function of degree of undersaturation was measured on shells of individual species of coccoliths and foraminifera, various size fractions of sediment from the Ontong-Java Plateau and the Rio Grande Rise, a collection of large pteropods, and on synthetic calcite and aragonite powder.Results of the study indicate that all biogenic and synthetic calcium carbonate follows the rate law $\text{R\% = k\%(1 ? Ω)}{}^{\mathrm{n}}$ where $\text{Ω  [Ca}{}^{\mathrm{2+}}\text{][CO}{}_3{}^{\mathrm{2?}}\text{]/K'}{}_{\mathrm{sp}}$ and K'_sp is the apparent solubility product of calcite or aragonitic seawater. In the case of all calcite samples, n_c = 4.5, while for aragonitic samples n_a = 4.2. The ‘rate constant’, k%, varies widely between samples and in many cases is inversely correlated with grain size. However, the individual species of coccoliths, E. huxleyi and C. neohelis, which were cultured in the laboratory appear not to follow this rule, with dissolution rates an order to magnitude lower than expected.  相似文献   

Aragonite from deep sea ultramafic rocks     

E. Bonatti  J.R. Lawrence  P.R. Hamlyn  D. Breger 《Geochimica et cosmochimica acta》1980,44(8):1207-1214

Aragonite mineralization was observed in serpentinized peridotites from the Romanche and Vema Fracture Zones in the Atlantic and the Owen Fracture Zone in the Indian Ocean, either in veins or as radial aggregates in cavities within the serpentinites. Evidence of incipient dissolution of the aragonite crystals was observed in one case. The aragonites tend to have lower Mg content (< 0.03%) and higher Sr content (> 0.95%) relative to other marine aragonites. Their ${}^{18}\text{O}{}^{16}\text{O}$, ${}^{13}\text{C}{}^{12}\text{C}$ and ${}^{87}\text{Sr}{}^{86}\text{Sr}$ isotopic ratios suggest the aragonite was deposited at ocean floor temperatures from solutions derived from sea water circulating in fissures and fractures within the ultramafic rocks. The ${}^{18}\text{O}{}^{16}\text{O}$ ratios of the serpentines indicate serpentinization occurred at higher temperatures, probably deeper in the crust. Low-T reactions between circulating seawater and Mg-silicates (primarily serpentine and pyroxenes) caused high pH and enrichment of Mg and Ca in the solution, conditions favoring carbonate precipitation. Aragonite was formed rather than calcite presumably because the high Mg²⁺ concentration in the solution inhibited calcite precipitation. The high Sr content of the aragonites is probably related, at least in part, to their low temperature of formation. Opaque mineral grains containing over 8% NiO and over 40% MnO were observed concentrated along the margins of some of the aragonite veins, suggesting that Ni is one of the elements mobilized during reactions between ultramafic rocks and circulating seawater.  相似文献   

Uptake of fluoride by aragonite     

M. Ichikuni 《Chemical Geology》1979,27(3):207-214

The uptake of F by aragonite is attributed to the ion-exchange process, in which one CO₃^2? ion in the structure is replaced by two F^? ions. Under the equilibrium condition at 15° C and 1 atm., the partition of F between aragonite and aqueous solution is described by: were [F] denotes the F content of aragonite in mol/g, and a_F and a_Ca are the aqueous activities of F^? and Ca²⁺, respectively. The equation was successfully applied to estimating the F content of marine aragonite.  相似文献   

The geochemical evolution of the Pleistocene Lake Lisan-Dead Sea system     

Amitai Katz  Yehoshua Kolodny  Arie Nissenbaum 《Geochimica et cosmochimica acta》1977,41(11):1609-1626

The geochemical history of Lake Lisan, the Pleistocene precursor of the Dead Sea, has been studied by geological, chemical and isotopic methods.Aragonite laminae from the Lisan Formation yielded (equivalent) Sr/Ca ratios in the range 0.5 × 10^?2?1 × 10^?2, Na/Ca ratios from 3.6 × 10^?3 to 9.2 × 10^?3, $\text{δ}{}^{18}\text{O}{}_{\mathrm{PDB}}$ values between 1.5 and 7%. and $\text{δ}{}^{13}\text{C}{}_{\mathrm{PDB}}$ from ?7.7 to 3.4%..The distribution coefficient of Na⁺ between aragonite and aqueous solutions, $\text{λ}{}^{\mathrm{A}}{}_{\mathrm{Na}}$, is experimentally shown to be very sensitive to salinity and nearly temperature independent. Thus, Na/Ca in aragonite serves as a paleosalinity indicator.Sr/Ca ratios and $\text{δ}{}^{18}\text{O}$ values in aragonite provide good long-term monitors of a lake's evolution. They show Lake Lisan to be well mixed, highly evaporated and saline. Except for a diluted surface layer, the salinity of the lake was half that of the present Dead Sea (15 vs 31%).Lake Lisan evolved from a small, yet deep, hypersaline Dead Sea-like, water body. This initial lake was rapidly filled-up to its highest stand by fresh waters and existed for about 40,000 yr before shrinking back to the present Dead Sea. The chemistry of Lake Lisan at its stable stand represented a material balance between a Jordan-like input, an original large mass of salts and a chemical removal of aragonite. The weighted average depth of Lake Lisan is calculated, on a geochemical basis, to have been at least 400, preferably 600 m.The oxygen isotopic composition of Lake Lisan water, which was higher by at least 3%. than that of the Dead Sea, was probably dictated by a higher rate of evaporation.Na/Ca ratios in aragonite, which correlate well with $\text{δ}{}^{13}\text{C}$ values, but change frequently in time, reflect the existence of a short lived upper water layer of varying salinity in Lake Lisan.  相似文献   

Biogenic hydrocarbon gases and sulfate reduction in the Orca Basin brine     

Denis A Wiesenburg  James M Brooks  Bernie B Bernard 《Geochimica et cosmochimica acta》1985,49(10):2069-2080

The composition of light hydrocarbon gases in the Orca Basin, an anoxic, hypersaline intraslope depression on the continental slope of the northern Gulf of Mexico, indicates that both methane and ethane are biogenic in nature with a $\text{C}{}_1\text{(C}{}_2\text{+ C}{}_3\text{)}$ ratio of 730 and a δ¹³C of methane of ?73%. relative to the PDB standard. The concentrations of methane (750 mM) and ethane (1300 mM) in the Orca Basin brine are higher than any other marine anoxic basin. These high levels result not from high rates of productivity, but from the long residence time of the brine in the basin, due to its high stability toward mixing with overlying seawater ($\text{Δσ}{}_1\text{ΔZ}\text{=}\text{3.2}\text{m}$). Both methane and ethane show well mixed distributions in the brine. These distributions probably result from convective mixing of the isohaline brine pool due to normal heat flow from the basin sediments. Methane and ethane maxima above the pycnocline at the brine/seawater interface reflect in situ production and/or consumption in the aerobic water column. Concurrent maxima in suspended particulate material distributions in this region suggest methane may be produced there in anaerobic microenvironments associated with the suspended matter. Reduced rates of anaerobic decomposition (including sulfate reduction) in the brine sediments are inferred from preserved Sargassum fronds in the sediments, vertical sulfate profiles in most cores, and the sediment organic carbon content which is two to three times higher in sediments below the high salinity brine than in the normal Gulf sediments nearby.  相似文献   

Kinetics and thermochemistry of amyl xanthate adsorption by pyrite and marcasite     

H.H. Haung  J.D. Miller 《International Journal of Mineral Processing》1978,5(3):241-266

The kinetics and thermochemistry of the xanthate adsorption reaction on pyrite and marcasite were evaluated with respect to the existing theory. The rate of xanthate adsorption was studied in a stirred reactor and the xanthate concentration was determined by UV spectrophotometry as a function of time. The heat of the adsorption reaction was measured with a microcalorimeter. The results from both experiments indicate that xanthate adsorption by pyrite or marcasite involves the formation of dixanthogen by an electrochemical reaction at the solid surface which supports the conclusions of other investigators: The rate of the adsorption reaction was found to be approximately one-half order with respect to the xanthate concentration and to have an activation energy of 7.5 kcal/mole. Additionally, the rate was found to have a slight dependence on pH under certain conditions. In view of these results, it appears that the adsorption reaction is controlled by electrochemical discharge at the pyrite surface. Analysis of the data in terms of an electrochemical kinetic model successfully explained the observed rate phenomena.The measured heat of the adsorption reaction at low pH was found to be between ?63 and ?56 kcal/mole of adsorbed dixanthogen and independent of surface coverage. These experimental heats of adsorption agree with the value of ?57 kcal/mole of dixanthogen calculated for the oxidation of xanthate by oxygen from thermodynamic data reported in the literature.  相似文献   

Influence of an americium solid phase on americium concentrations in solutions     

Dhanpat Rai  R.G. Strickert  D.A. Moore  R.J. Serne 《Geochimica et cosmochimica acta》1981,45(11):2257-2265

Americium-241 concentrations in solutions contacting contaminated sediments for up to 2 yr were measured as a function of pH. Steady-state concentrations were reached within a few days. The solubility-limited Am concentration was found to decrease approximately 10-fold with one unit increase in pH. The log equilibrium constant for the solubility of Am_(soil) solid $\text{[Am}{}_{\mathrm{(soil)}}\text{+ H}{}^{\mathrm{+}}\text{? Am}{}_{\mathrm{(aq\; complex)}}{}^{\mathrm{+}}\text{]}$ was found to be ?4.12. The predictions based upon thermodynamic data suggest that Am_{(aq complex)}⁺ is likely to be Am(OH)₂⁺. Although the chemical formula of Am_(soil) was not determined, it does not appear to be Am(OH)₃(a).Published data on sorption coefficients of Am by different rocks, soils, and minerals were critically evaluated. Final Am solution concentrations calculated from the sorption coefficients of a variety of earth materials with several solutions agreed well with the concentrations predicted from the solubility of Am_(soil) solid, indicating that the sorption coefficient data are controlled by Am precipitation.  相似文献   

Sodium and potassium coprecipitation in aragonite     

Art F White 《Geochimica et cosmochimica acta》1977,41(5):613-625

The coprecipitation of Na and K was experimentally investigated in aragonite. The distribution functions were determined at pH 6.8 and 8.8 over aqueous Na and K concentrations of between 5 × 10^?4and 2.0 M and temperatures of between 25 and 75°C.The mole fractions of Na and K in aragonite are related to the aqueous ratios of Na and Ca by a function of the form where C₀ and C₁ are constants at a given temperature. This equation was derived by a statistical model assuming a heterogeneous energy distribution for the sites of incorporation. The independence of the coprecipitation process from aqueous anion activities suggests that carbonate is the only anionic species in the solid solution.  相似文献   

Geochimie et teneurs isotopiques des systèmes saisonniers de dissolution de la calcite dans un sol sur craie     

L. Dever  R. Durand  J.Ch. Fontes  P. Vachier 《Geochimica et cosmochimica acta》1982,46(10):1947-1956

In a soil developed on the Cretaceous chalk of the Eastern Paris basin, calcite dissolution begins at the surface. The soil water is rapidly saturated in calcite. Calcite dissolution follows two different pathways according to seasonal pedoclimatic conditions.During winter: the soil is only partly saturated in water and the CO₂ partial pressure is low (Ca 10^?3 atm.). As a consequence total inorganic dissolved carbon (TIDC) is a hundred times the carbon content of the gaseous phase. Equilibrium is usually observed between the two phases. It is a closed system. The measured carbon 14 activity (87,5%) and ¹³C content ($\text{δ}{}_{\mathrm{tidc}}{}^{13}\text{C = ?12,2\%0}$) of the drainage water are very close to theoretical values calculated for an ideal mixing system between gaseous and mineral phases (respectively characterized by the following isotopic values: $\text{δ}{}_{\mathrm{G}}{}^{13}\text{C = ?21,5\%0}$; $\text{A}{}_{\mathrm{G}}{}^{14}\text{C = 118\%}$; $\text{δ}{}_{\mathrm{M}}{}^{13}\text{C = +2,9\%0}$; $\text{A}{}_{\mathrm{M}}{}^{14}\text{C = 28\%}$).During spring and summer: the soil moisture decreases, the input of biogenic CO₂ induces an increase of the soil CO₂ partial pressure (Ca from 3.10^?3 atm to 7.10^?3 atm). The carbon content of the gaseous phase is higher by an order of magnitude compared to winter conditions. Therefore the aqueous phase is undersaturated in CO₂ with respect to the latter. This disequilibrium occurs as a result of unbalanced rates of CO₂ dissolution and CO₂ effusion toward atmosphère. It is an open system. The carbon isotopic ratio of the aqueous phase is regulated by that of the gaseous phase, as demonstrated by the agreement between measured and calculated isotopic compositions (respectively δ_{L mes} = from ?9,4%0 to ?11,5%0, δ_{l calc} = from ?9,8%0 to ?13,9%0 A_{L mes} = 119%, A_{L calc} = from 119% to 125%).The solutions originating from both systems (open and closed) move downwards without significant mixing together. It has also been observed that no significant variation of the TIDC isotopic composition occurs during precipitation of secondary calcite.  相似文献   

The effect of pressure on the solubility of minerals in water and seawater     

Frank J Millero 《Geochimica et cosmochimica acta》1982,46(1):11-22

The effect of presure on the solubility of minerals in water and seawater can be estimated from In where the volume (ΔV) and compressibility (ΔK) changes at atmospheric pressure (P = 0) are given by Values of the partial molal volume ($\text{V}\text{?}$) and compressibilty ($\text{K}\text{?}$) in water and seawater have been tabulated for some ions from 0 to 50°C. The compressibility change is quite large (~10 × 10^?3 cm³ bar^?1 mol^?1) for the solubility of most minerals. This large compressibility change accounts for the large differences observed between values of ΔV obtained from linear plots of In K_sp versus P and molal volume data (Macdonald and North, 1974; North, 1974). Calculated values of $\text{K}{}^{\mathrm{P}}{}_{\mathrm{sp}}\text{K}{}^{\mathrm{o}}{}_{\mathrm{sp}}$ for the solubility of CaCO₃, SrSO₄ and CaF₂ in water were found to be in good agreement with direct measurements (Macdonald and North, 1974). Similar calculations for the solubility of minerals in seawater are also in good agreement with direct measurements (Ingle, 1975) providing that the surface of the solid phase is not appreciably altered.  相似文献   

A fundamental equation for calcite dissolution kinetics   总被引：1，自引：0，他引：1  

E.L. Sjöberg 《Geochimica et cosmochimica acta》1976,40(4):441-447

A fundamental rate equation for the dissolution of calcite in a pure 0.7 M KC1 solution has been determined. Between pH 8.0 and 10.1 the kinetics of the dissolution reaction can be expressed by the equation , where d[Ca²⁺]/dt is the rate in mole cm^?3s^?1, k is the apparent rate constant in s^?1 cm^?2, A is the calcite surface area and C is the square root of the calcite solubility constant. The apparent rate constant at 20°C is 9.5 × 10^?6s^?1cm^?2. The apparent activation energy for the reaction between 5 and 50°C is 8.4 kcal mole^?1.The reaction rate is pH independent above pH = 7.5. At pH values less than 8, [CO₃^2?] becomes negligible, and the rate becomes fast and should be dependent on the calcite surface area alone, if there is no change in mechanism.The stirring coefficient between 2.8 and 11.1 rev s^?1 is 0.33. This, together with the relatively high activation energy, indicates that the reaction is mainly chemically controlled.Interpolation of the experimental results into seawater systems gives a computed rate several magnitudes greater than the observed rate, but considerably less than that calculated for a diffusion-controlled reaction.  相似文献   

Partial molal volume calculations for the dissolution of aged amorphous silica in salt water and seawater at 0–2°C     

Joan D. Willey 《Geochimica et cosmochimica acta》1982,46(7):1307-1310

Measurement of solubility as a function of pressure allows calculation of $\text{3}\text{V}\text{?}{}_1$. Using this experimental approach, the best estimate of $\text{3}\text{V}\text{?}{}_1$ for the dissolution of aged amorphous silica in salt water or seawater at 0–2°C is ?9.9 cm³ mol^?1 (standard error = 0.4 cm³ mol^?1). This gives , which compares well with other published values of .  相似文献   

The partial molal volume of silicic acid in 0.725 m NaCl     

Iver W Duedall  Ramesh Dayal  Joan D Willey 《Geochimica et cosmochimica acta》1976,40(10):1185-1189

The partial molal volume ($\text{V}\text{?}$) of silicic acid in 0.725 m NaCl at 20°C has been calculated from (1) direct volume changes due to the dissolution of anhydrous sodium silicate and (2) some literature values for the partial molal volumes of NaOH and water. , unconnected for electrostriction effects, was found to be 53 ± 2 ml mole^?1. , corrected for volume changes due to solvent electrostriction by charged Si species, was estimated to be in the range 58–62 ml mole^?1; this range is 7–11 ml mole^?1 greater than the calculated from Willey's (Mar. Chem. 2, 239–250, 1974) solubility data obtained from the dissolution, in seawater, of amorphous silica subjected to hydrostatic pressure. Our does, however, agree within experimental error with the calculated from Jones and Pytkowicz's (Bull. Soc. Roy. Sci. Liege 42, 118–120, 1973) data for the solubility of amorphous silica in seawater at high pressure and is nearly in agreement with Willey's (Ph.D. thesis, Dalhousie University, 1975) solubility data for amorphous silica in 0.6 m NaCl.  相似文献   

The solubilities of calcite,aragonite and vaterite in CO₂-H₂O solutions between 0 and 90°C,and an evaluation of the aqueous model for the system CaCO₃-CO₂-H₂O     

L.Niel Plummer  Eurybiades Busenberg 《Geochimica et cosmochimica acta》1982,46(6):1011-1040

Calculations based on approximately 350 new measurements (Ca_T-PCO₂) of the solubilities of calcite, aragonite and vaterite in CO₂-H₂O solutions between 0 and 90°C indicate the following values for the log of the equilibrium constants K_C, K_A, and K_V respectively, for the reaction CaCO₃(s) = Ca²⁺ + CO^2?₃: $\text{Log K}{}_{\mathrm{C}}\text{= ?171.9065 ? 0.077993T +}\text{2839.319}\text{T}\text{+ 71.595 log T}$$\text{Log K}{}_{\mathrm{A}}\text{= ?171.9773 ? 0.077993T +}\text{2903.293}\text{T}\text{+71.595 log T}$$\text{Log K}{}_{\mathrm{V}}\text{= ?172.1295 ? 0.077993T +}\text{3074.688}\text{T}\text{+ 71.595 log T}$ where T is in ^oK. At 25°C the logarithms of the equilibrium constants are ?8.480 ± 0.020, ?8.336 ± 0.020 and ?7.913 ± 0.020 for calcite, aragonite and vaterite, respectively.The equilibrium constants are internally consistent with an aqueous model that includes the CaHCO⁺₃ and CaCO⁰₃ ion pairs, revised analytical expressions for CO₂-H₂O equilibria, and extended Debye-Hückel individual ion activity coefficients. Using this aqueous model, the equilibrium constant of aragonite shows no PCO₂-dependence if the CaHCO⁺₃ association constant is between 0 and 90°C, corresponding to the value logK_Cahco⁺3 = 1.11 ± 0.07 at 25°C. The CaCO⁰₃ association constant was measured potentiometrically to be between 5 and 80°C, yielding logK_CaCO⁰3 = 3.22 ± 0.14 at 25°C.The CO₂-H₂O equilibria have been critically evaluated and new empirical expressions for the temperature dependence of K_H, K₁ and K₂ are $\text{log K}{}_{\mathrm{H}}\text{= 108.3865 + 0.01985076T ?}\text{6919.53}\text{T}\text{? 40.45154 log T +}\text{669365.}\text{T}{}^2$, $\text{log K}{}_1\text{= ?356.3094 ? 0.06091964T +}\text{21834.37}\text{T}\text{+ 126.8339 log T —}\text{1684915.}\text{T}{}^2$ and logK₂ = ?107.8871 ? 0.03252849T + 5151.79/T + 38.92561 logT ? 563713.9/T² which may be used to at least 250°C. These expressions hold for 1 atm. total pressure between 0 and 100°C and follow the vapor pressure curve of water at higher temperatures.Extensive measurements of the pH of Ca-HCO₃ solutions at 25°C and 0.956 atm PCO₂ using different compositions of the reference electrode filling solution show that measured differences in pH are closely approximated by differences in liquid-junction potential as calculated by the Henderson equation. Liquid-junction corrected pH measurements agree with the calculated pH within 0.003-0.011 pH.Earlier arguments suggesting that the CaHCO⁺₃ ion pair should not be included in the CaCO₃-CO₂-H₂O aqueous model were based on less accurate calcite solubility data. The CaHCO⁺₃ ion pair must be included in the aqueous model to account for the observed PCO₂-dependence of aragonite solubility between 317 ppm CO₂ and 100% CO₂.Previous literature on the solubility of CaCO₃ polymorphs have been critically evaluated using the aqueous model and the results are compared.  相似文献   

Rates of reaction of pyrite and marcasite with ferric iron at pH 2     

C.L Wiersma  J.D Rimstidt 《Geochimica et cosmochimica acta》1984,48(1):85-92

The relative reactivities of pulverized samples (100–200 mesh) of 3 marcasite and 7 pyrite specimens from various sources were determined at 25°C and pH 2.0 in ferric chloride solutions with initial ferric iron concentrations of 10^?3 molal. The rate of the reaction: was determined by calculating the rate of reduction of aqueous ferric ion from measured oxidation-reduction potentials. The reaction follows the rate law: where m_Fe³⁺ is the molal concentration of uncomplexed ferric iron, k is the rate constant and $\text{A}\text{M}$ is the surface area of reacting solid to mass of solution ratio. The measured rate constants, k, range from 1.0 × 10^?4 to 2.7 × 10^?4 sec^?1 ± 5%, with lower-temperature/early diagenetic pyrite having the smallest rate constants, marcasite intermediate, and pyrite of higher-temperature hydrothermal and metamorphic origin having the greatest rate constants. Geologically, these small relative differences between the rate constants are not significant, so the fundamental reactivities of marcasite and pyrite are not appreciably different.The activation energy of the reaction for a hydrothermal pyrite in the temperature interval of 25 to 50°C is 92 kJ mol^?1. This relatively high activation energy indicates that a surface reaction controls the rate over this temperature range. The BET-measured specific surface area for lower-temperature/early diagenetic pyrite is an order of magnitude greater than that for pyrite of higher-temperature origin. Consequently, since the lower-temperature types have a much greater $\text{A}\text{M}$ ratio, they appear to be more reactive per unit mass than the higher temperature types.  相似文献   

Selective flotation of inherently hydrophobic minerals by controlling the air/solution interfacial tension     

S. Kelebek  G.W. Smith 《International Journal of Mineral Processing》1985,14(4):275-289

Selective wettability and floatability of several inherently hydrophobic minerals have been investigated using aqueous methanol solutions of various surface tensions. The relationship between the critical surface tension of wetting, $\text{γ}{}_{\mathrm{<mtext>c</mtext>}}$, and of floatability, $\text{γ}{}_{\mathrm{<mtext>cf</mtext>}}$, of the samples is examined. Experimental evidence is provided to show that a flotation feed cannot be represented by an uniquely defined $\text{γ}{}_{\mathrm{<mtext>cf</mtext>}}$ value. It is appropriate to specify for an inherently hydrophobic solid a critical surface tension range of floatability with upper and lower limits, $\text{γ}{}_{\mathrm{<mtext>cmf</mtext>}}$ and $\text{γ}{}_{\mathrm{<mtext>clf</mtext>}}$ respectively. The particles which are predominated by cleavage or crystal faces determine the lower limit, while those with some threshold degree of ionic character determine the upper limit. Examples of separation tests presented demonstrate that in the case of equality between $\text{γ}{}_{\mathrm{<mtext>c</mtext>}}$ values of two inherently floatable solids (or their $\text{γ}{}_{\mathrm{<mtext>clf</mtext>}}$ values), a difference in $\text{γ}{}_{\mathrm{<mtext>cmf</mtext>}}$ values determines the efficiency of their separation. It is also shown that the interfacial tension of maximum separation efficiency may be predicted from the individual surface tension of floatability curves which may be represented by second-order functions.  相似文献   

Solubility product of galena at 298°K: A possible explanation for apparent supersaturation in nature     

A.D. Uhler  G.R. Helz 《Geochimica et cosmochimica acta》1984,48(6):1155-1160

The synthetic chelating agent ethylenediaminetetraacetic acid (EDTA) has been used to evaluate the stoichiometric solubility product of galena (PbS) at 298°K: $\text{K}{}_{\mathrm{s2}}\text{=}{}^{\mathrm{a}}\text{Pb}{}^{\mathrm{2+}}{}^{\mathrm{a}}\text{HS}{}^{\mathrm{?}}{}^{\mathrm{a}}\text{H}{}^{\mathrm{+}}$ This method circumvents the possible uncertainties in the stoichiometry and stability of lead sulfide complexes. At infinite dilution, $\text{Log K}{}_{\mathrm{s2}}\text{= ?12.25 ±0.17}$, and at an ionic strength corresponding to seawater ($\text{I = 0.7 M}$), $\text{Log K}{}_{\mathrm{s2}}\text{= ?11.73 ± 0.05}$. Using the value of $\text{K}{}_{\mathrm{s2}}$ at infinite dilution, and the free energies of formation of HS^? and Pb²⁺ at 298°K (literature values), the free energy of formation of PbS at 298°K is computed to be $\text{?79.1 ± 0.8 KJ/mol (?18.9 Kcal/mol)}$. Galena is shown to be more than two orders of magnitude more soluble than indicated by calculations based on previous thermodynamic data.  相似文献