共查询到20条相似文献，搜索用时 31 毫秒
1.
We conduct shear wave splitting measurements on waveform data from the Hi-net and the broadband F-net seismic stations in Kanto and SW Japan generated by shallow and intermediate-depth earthquakes occurring in the subducting Philippine Sea and Pacific slabs. We obtain 1115 shear wave splitting parameter pairs. The results are divided into those from the shallow (depth < 50 km) and the deep (depth > 50 km) events. The deep events beneath Kanto are further divided into PHS1 and PHS2 (upper and lower planes of the double seismic zone in the Philippine Sea slab, respectively), PAC1 and PAC2 (western and eastern Pacific slab, respectively) events. The results from the shallow events represent the crustal anisotropy, and their fast directions are more or less aligned in the σHmax directions, implying that the anisotropy is produced by the alignment of the vertical cracks in the crust induced by the compressive stresses. In Kanto, Kii Peninsula and Kyushu regions, the results from the deep events suggest a contribution from the mantle wedge anisotropy. Events from all groups beneath Kanto show NW, NE and EW fast directions. This complex pattern seems to be produced by the corner flows induced by both the WNW PAC plate subduction and the oblique NNW PHS slab subduction with the associated olivine lattice-preferred orientations (LPOs), and the anisotropy frozen in the PHS slab. The deep events beneath Kii Peninsula show NE and NW fast directions and may be produced by the corner flow produced by the NNW PHS slab subduction with the associated olivine LPOs. The NE directions might also be produced by the segregated melts in the thin layers parallel to the PHS slab subduction. The deep events beneath N Kyushu show NNW fast directions, which may result from the southeastward flow in the upper mantle inferred from the stresses in the upper plate. Results from the deep events beneath middle-south Kyushu show dominantly E–W fast directions, in both the fore- and back-arcs. They may be produced by the corner flow of the westward PHS slab subduction with the olivine LPOs. Because the source regions with multiple fast directions are not resolved in this study, further detailed analyses of shear wave splitting are necessary for a better understanding of the stress state, the induced mantle flow, and the melt-segregation processes. 相似文献
2.
《Journal of Asian Earth Sciences》2010,38(5-6):460-472
To study the crustal structure beneath the onshore–offshore transitional zone, a wide-angle onshore–offshore seismic experiment was carried out in northern South China Sea near Hong Kong, using large volume airgun sources at sea and seismic stations on land. The crustal velocity model constructed from traveltime fitting shows that the sedimentary thickness abruptly increases seaward of the Dangan Islands based on the characteristics of Pg and Multiple Pg, and the crustal structure beneath the sedimentary layer is relatively simple. The Moho depth is about 25–28 km along the profile and the P-wave velocity increases gradually with depth. The velocities in the upper crust range from 5.5 to 6.4 km/s, while that in the lower crust is 6.4–6.9 km/s. It also reveals a low velocity zone with a width of more than 10 km crossing the crust at about 75–90 km distance, which suggests that the Littoral Fault Zone (LFZ) exists beneath the onshore–offshore transitional zone. The magnetism anomalies, bouguer gravity anomalies and active seismic zone along the coastline imply the LFZ is a main tectonic fault in the onshore–offshore area. Combined with two previously published profiles in the continental South China (L–G profile) and in the northern margin of South China Sea (OBS1993) respectively, we constructed a land-sea super cross-section about 1000 km long. The results show the onshore–offshore transitional zone is a border separating the unstretched and the stretched continental crust. The low velocity layer (LVL) in the middle crust was imaged along L–G profile. However, the high velocity layer (HVL) in the lower crust was detected along OBS1993. By analyzing the mechanisms of the LVL in the middle crust and HVL in the base of crust, we believe the crustal structures had distinctly different attributes in the continental South China and in the northern SCS, which indicates that the LFZ could be the boundary fault between them. 相似文献
3.
《Gondwana Research》2013,24(4):1455-1483
The crust and upper mantle in mainland China were relatively densely probed with wide-angle seismic profiling since 1958, and the data have provided constraints on the amalgamation and lithosphere deformation of the continent. Based on the collection and digitization of crustal P-wave velocity models along related wide-angle seismic profiles, we construct several crustal transects across major tectonic units in mainland China. In our study, we analyzed the seismic activity, and seismic energy releases during 1970 and 2010 along them. We present seismogenic layer distribution and calculate the yield stress envelopes of the lithosphere along the transects, yielding a better understanding of the lithosphere rheology strength beneath mainland China. Our results demonstrate that the crustal thicknesses of different tectonic provinces are distinctively different in mainland China. The average crustal thickness is greater than 65 km beneath the Tibetan Plateau, about 35 km beneath South China, and about 36–38 km beneath North China and Northeastern China. For the basins, the thickness is ~ 55 km beneath Qaidam, ~ 50 km beneath Tarim, ~ 40 km beneath Sichuan and ~ 35 km beneath Songliao. Our study also shows that the average seismic P-wave velocity is usually slower than the global average, equivalent with a more felsic composition of crust beneath the four tectonic blocks of mainland China resulting from the complex process of lithospheric evolution during Triassic and Cenozoic continent–continent and Mesozoic ocean–continent collisions. We identify characteristically different patterns of seismic activity distribution in different tectonic blocks, with bi-, or even tri-peak distribution of seismic concentration in South Tibet, which may suggest that crustal architecture and composition exert important control role in lithosphere deformation. The calculated yield stress envelopes of lithosphere in mainland China can be divided into three groups. The results indicate that the lithosphere rheology structure can be described by jelly sandwich model in eastern China, and crème brulee models with weak and strong lower crust corresponding to lithosphere beneath the western China and Kunlun orogenic belts, respectively. The spatial distribution of lithospheric rheology structure may provide important constraints on understanding of intra- or inter-plate deformation mechanism, and more studies are needed to further understand the tectonic process(es) accompanying different lithosphere rheology structures. 相似文献
4.
A dense nationwide seismic network recently constructed in Japan has resulted in the production of a large amount of high-quality data that have enabled the high-resolution imaging of deep seismic structures in the Japanese subduction zone. Seismic tomography, precise locations of earthquakes, and focal mechanism research have allowed the identification of the complex structure of subducting slabs beneath Japan, revealing that the subducting Philippine Sea slab underneath southwestern Japan has an undulatory configuration down to a depth of 60–200 km, and is continuous from Kanto to Kyushu without disruption or splitting, even within areas north of the Izu Peninsula. Analysis of the geometry of the Pacific and Philippine Sea slabs identified a broad contact zone beneath the Kanto Plain that causes anomalously deep interplate and intraslab earthquake activity. Seismic tomographic inversions using both teleseismic and local events provide a clear image of the deep aseismic portion of the Philippine Sea slab beneath the Japan Sea north of Chugoku and Kyushu, and beneath the East China Sea west of Kyushu down to a depth of ∼450 km. Seismic tomography also allowed the identification of an inclined sheet-like seismic low-velocity zone in the mantle wedge beneath Tohoku. A recent seismic tomography work further revealed clear images of similar inclined low-velocity zones in the mantle wedge for almost all other areas of Japan. The presence of the inclined low-velocity zones in the mantle wedge across the entirety of Japan suggests that it is a common feature to all subduction zones. These low-velocity zones may correspond to the upwelling flow portion of subduction-induced convection systems. These upwelling flows reach the Moho directly beneath active volcanic areas, suggesting a link between volcanism and upwelling. 相似文献
5.
Based on the Crust2.0 model and the topography data of Chinese continent and its adjacent regions, a three-dimensional finite element model is constructed in terms of the spherical coordinate system. In our numerical model, the average annual ground temperature from 195 meteorological stations and temperature of upper mantle derived from the seismic velocities are adopted as the top and bottom boundary conditions, respectively. The observed thermal conductivity and heat production from P wave velocity based on empirical formula are employed in our numerical model as well. The comparison between the calculated and observed surface heat flow proved that our results are reliable. The temperature beneath the Precambrian cratons is lower than that of other areas for 100–300 °C also. The typical temperature rang at the Moho is estimated to be 800–1000 °C beneath the Tibetan plateau and 500–700 °C beneath the Precambrian cratons (such as Indian plate, Sichuan basin, South China, North China and Tarim), respectively. The thermal state in the eastern part of Sino-Korean craton at the depth deeper than 60 km indicates that it was destructed. The thermal structure in center of Tibetan plateau (especially beneath Qiangtang area) supports the proposed flow of lower crustal or upper mantle material to the east. Generally, the distribution of volcanoes in Chinese continent is consistent with the high temperature areas in the crust or upper mantle. There are many obvious thermal transition zones across the orogenic belts. The thermal transition zone between eastern and western parts in the crust of Chinese continent is consistent with the north–south seismic zone. 相似文献
6.
中国边缘海域及其邻区的岩石层结构与构造分析 总被引：3，自引：0，他引：3
利用中国边缘海域近年的地震层析成像结果,根据速度异常和各向异性分析东海、黄海和南海北部的岩石层结构和构造,讨论中朝块体和扬子块体在黄海内部的拼合边界(黄海东部断裂带)、东海陆架盆地上地幔异常与岩石层形成演化、南海北部地壳底部高速层的成因及地幔活动等问题。分析表明,黄海东部与朝鲜半岛之间存在一个深部构造界限(大致对应于黄海东部断裂带),分界两侧Pn波速度各向异性存在明显差异,反映不同构造应力和断裂剪切运动作用下的岩石层地幔变形特征。东海陆架下方的低速异常揭示了张裂盆地形成时期的地幔活动痕迹,表明中、新生代期间发生过地幔上涌并造成岩石层减薄,菲律宾海板块向西俯冲引发的地幔活动对东海陆架岩石层的形成、演化产生明显的影响。南海北部岩石层厚度较大并且温度相对偏低,地幔异常仅限于局部地区,估计南海北部大陆边缘的地壳底部高速层形成于张裂发生之前,或者是地壳形成时期壳幔分异时的产物。南海中央海盆的扩张不仅导致地壳拉张,软流层物质上涌,而且也造成岩石层地幔减薄甚至缺失。 相似文献
7.
《Comptes Rendus Geoscience》2015,347(4):161-169
The Dead Sea Fault is a major strike-slip fault bounding the Arabia plate and the Sinai subplate. On the basis of three GPS campaign measurements, 12 years apart, at 19 sites distributed in Israel and Jordan, complemented by Israeli permanent stations, we compute the present-day deformation across the Wadi Arava fault, the southern segment of the Dead Sea Fault. Elastic locked-fault modelling of fault-parallel velocities provides a slip rate of 4.7 ± 0.7 mm/yr and a locking depth of 11.6 ± 5.3 km in its central part. Along its northern part, south of the Dead Sea, the simple model proposed for the central profile does not fit the velocity field well. To fit the data, two faults have to be taken into account, on both sides of the sedimentary basin of the Dead Sea, each fault accommodating ∼ 2 mm/yr. Locking depths are small (less than 2 km on the western branch, ∼ 6 km on the eastern branch). Along the southern profile, we are once again unable to fit the data using the simple model, similar to the central profile. It is very difficult to propose a velocity greater than 4 mm/yr, i.e. smaller than that along the central profile. This leads us to propose that a part of the relative movement from Sinai to Arabia is accommodated along faults located west of our profiles. 相似文献
8.
Temperature measurements carried out on 9 hydrocarbon exploration boreholes together with Bottom Simulating Reflectors (BSRs) from reflection seismic images are used in this study to derive geothermal gradients and heat flows in the northern margin of the South China Sea near Taiwan. The method of Horner plot is applied to obtain true formation temperatures from measured borehole temperatures, which are disturbed by drilling processes. Sub-seafloor depths of BSRs are used to calculate sub-bottom temperatures using theoretical pressure/temperature phase boundary that marks the base of gas hydrate stability zone. Our results show that the geothermal gradients and heat flows in the study area range from 28 to 128 °C/km and 40 to 159 mW/m2, respectively. There is a marked difference in geothermal gradients and heat flow beneath the shelf and slope regions. It is cooler beneath the shelf with an average geothermal gradient of 34.5 °C/km, and 62.7 mW/m2 heat flow. The continental slope shows a higher average geothermal gradient of 56.4 °C/km, and 70.9 mW/m2 heat flow. Lower heat flow on the shelf is most likely caused by thicker sediments that have accumulated there compared to the sediment thickness beneath the slope. In addition, the continental crust is highly extended beneath the continental slope, yielding higher heat flow in this region. A half graben exists beneath the continental slope with a north-dipping graben-bounding fault. A high heat-flow anomaly coincides at the location of this graben-bounding fault at the Jiulong Ridge, indicating vigorous vertical fluid convection which may take place along this fault. 相似文献
9.
The Truong Son Fold Belt (TSFB) is characterised by Late Carboniferous-Late Triassic metamorphic, volcanic and plutonic rocks, the product of accretion of the Indochina Terrane onto the South China Terrane and a range of composite subduction, collision and extensional events. This study discusses geochronological and geochemical data obtained from a dioritic intrusion and rhyolitic tuff mapped in the Donken area of SE Laos, and previously assigned to the Permian Antoum Granodiorite rock suite within the TSFB. Magmatic zircon U-Pb Q-ICP-MS dating undertaken in this study suggests ages of ca 470 ± 2 Ma for the diorite and ca 476 ± 1.5 Ma for a proximal rhyolitic tuff.Whole-rock geochemistry of both units suggests a subduction-related island arc environment, with calc-alkaline and tholeiitic affinities for the diorite and tuff respectively. The intrusion also exhibits an adakitic signature (high Sr, low Y and HREE contents) suggesting that Ordovician magmatism also occurred within the Indochina Terrane, associated with an enigmatic, early Gondwana subduction event. This intrusion appears part of a broader, bilateral Early Ordovician magmatism, newly linked to the south-east subduction of the Tamky-Phuoc Son Ocean underneath the Kontum terrane, and a north-west subduction beneath the Truong Son terrane. Significantly, sub-economic hydrothermal Cu mineralisation observed within the dioritic intrusion, hints at the presence of local Ordovician, porphyry-style base metal enrichment. 相似文献
10.
We estimated the crustal thickness and velocity structure beneath the five stations comprising the Republic of Singapore’s seismic network. Our data set was composed of 697 teleseismic receiver functions and 7 months of broad-band data that was cross-correlated to produce inter-station Green’s functions. Surface wave group velocities were extracted from the Green’s functions to obtain dispersion data for a path from central Sumatra to Singapore in order to provide a complimentary data set to the receiver functions. Crustal thickness was estimated via an H − k stacking technique, and high-resolution 1D P-wave velocity profiles were generated beneath each station by jointly inverting receiver function stacks and the group velocity data using a linearised time-domain inversion scheme. Crustal thickness beneath four stations was found to be between 28.0 km and 32.0 km, while one station in the northeast of Singapore indicates 24.0 km thick crust. This implies a significant crustal thinning beneath Singapore over the lateral extent of 50.0 km. Inversion results exhibit several crustal features that are observable in the derived models at all five stations, indicating that they exist across Singapore as a whole. There appears to be an upper-crustal high-velocity zone beneath Singapore, underlain by a velocity inversion. Station NTU shows slower near-surface velocities than the other stations, consistent with its situation above the sedimentary Jurong formation. These results expand the available global velocity data set, as well as being useful for assessing the seismic hazard in Singapore. 相似文献
11.
The Asian Summer Monsoon (ASM) is the dominant climate system of South and East Asia. However, the history of monsoon intensification and the driving forces behind it are controversial. Wind-blown sediments in mid-latitude East Asia and fluvial-derived sediments in the northern South China Sea imply contrasting ASM patterns during the late Cenozoic. Here we use pollen records from the southwest South China Sea (International Ocean Discovery Program (IODP) Site U1433) to reconstruct the ASM evolution in low-latitude Southeast Asia. A slow increase in herbaceous plants since 8 Ma indicates a persistent weakening of precipitation in Indochina, which is dominated by the ASM. This signal is closely associated with a consistent coniferous plant record, indicating a continuous cooling trend that correlates well with Sea Surface Temperature (SST) decrease in the west Pacific Ocean. We propose that the monsoon weakening resulted in as much as a ~ 25% reduction in precipitation over the past 8 Ma in response to the Northern Hemisphere glaciation/global cooling, with some of the increase in conifers being linked to uplift of the Vietnamese Central Highland and the SE flank of the Tibetan Plateau in Yunnan and northern Vietnam. 相似文献
12.
The Philippine Fault results from the oblique convergence between the Philippine Sea Plate and the Sunda Block/Eurasian Plate. The fault exhibits left-lateral slip and transects the Philippine archipelago from the northwest corner of Luzon to the southeast end of Mindanao for about 1200 km. To better understand fault slip behavior along the Philippine Fault, eight GPS surveys were conducted from 1996 to 2008 in the Luzon region. We combine the 12-yr survey-mode GPS data in the Luzon region and continuous GPS data in Taiwan, along with additional 15 International GNSS Service sites in the Asia-Pacific region, and use the GAMIT/GLOBK software to calculate site coordinates. We then estimate the site velocity from position time series by linear regression. Our results show that the horizontal velocities with respect to the Sunda Block gradually decrease from north to south along the western Luzon at rates of 85–49 mm/yr in the west–northwest direction. This feature also implies a southward decrease of convergence rate along the Manila Trench. Significant internal deformation is observed near the Philippine Fault. Using a two dimensional elastic dislocation model and GPS velocities, we invert for fault geometries and back-slip rates of the Philippine Fault. The results indicate that the back-slip rates on the Philippine Fault increase from north to south, with the rates of 22, 37 and 40 mm/yr, respectively, on the northern, central, and southern segments. The inferred long-term fault slip rates of 24–40 mm/yr are very close to back-slip rates on locked fault segments, suggesting the Philippine Fault is fully locked. The stress tensor inversions from earthquake focal mechanisms indicate a transpressional regime in the Luzon area. Directions of σ1 axes and maximum horizontal compressive axes are between 90° and 110°, consistent with major tectonic features in the Philippines. The high angle between σ1 axes and the Philippine Fault in central Luzon suggests a weak fault zone possibly associated with fluid pressure. 相似文献
13.
Chi-Chia Tang Lupei Zhu Chau-Huei Chen Ta-Liang Teng 《Journal of Asian Earth Sciences》2011,41(6):549-570
The Chaochou Fault, a major geological boundary in southern Taiwan is considered to be a part of the convergent plate boundary between the Eurasia Plate and the Philippine Sea Plate. We applied the Common Conversion Point stacking technique to teleseismic radial receiver functions and obtained Moho variation and crustal structure across the Chaochou Fault. In the Eurasia Plate to its west, the Moho depth is about 37 km and the crust is subducting to the east beneath the Philippine Sea Plate with a dip angle of about 30° between the Backbone Belt and the Tananao Schist. In the Philippine Sea Plate, the Moho depth is about 17 km. The Longitudinal Valley marks the collision boundary between the Eurasia Plate and the Philippine Sea Plate. The results suggest that the depth extent of the Chaochou Fault is about 30–35 km and the fault becomes a “shallow-angle” thrust fault at depth. The Common Conversion Point image also shows several bending interfaces of velocity contrast in the crust. We proposed a simple model to explain the Philippine Sea Plate and Eurasia Plate collision process and the observed crustal deformations. 相似文献
14.
We constructed the S-wave velocity structure of the crust and uppermost mantle (10–100 km) beneath the North China based on the teleseismic data recorded by 187 portable broadband stations deployed in this region. The traditional two-step inversion scheme was adopted. Firstly, we measured the interstation fundamental Rayleigh wave phase velocity of 10–60 s and imaged the phase velocity distributions using the Tarantola inversion method. Secondly, we inverted the 1-D S-wave velocity structure with a grid spacing of 0.25° × 0.25° and constructed the 3-D S-wave velocity structure of the North China. The 3-D S-wave velocity model provides valuable information about the destruction mechanism and geodynamics of the North China Craton (NCC). The S-wave velocity structures in the northwestern and southwestern sides of the North–South Gravity Lineament (NSGL) are obviously different. The southeastern side is high velocity (high-V) while the northeastern side is low velocity (low-V) at the depth of 60–80 km. The upwelling asthenosphere above the stagnated Pacific plate may cause the destruction of the Eastern Block and form the NSGL. A prominent low-V anomaly exists around Datong from 50 to 100 km, which may due to the upwelling asthenosphere originating from the mantle transition zone beneath the Western Block. The upwelling asthenosphere beneath the Datong may also contribute to the destruction of the Eastern Block. The Zhangjiakou-Penglai fault zone (ZPFZ) may cut through the lithosphere and act as a channel of the upwelling asthenosphere. A noticeable low-V zone also exists in the lower crust and upper mantle lid (30–50 km) beneath the Beijing–Tianjin–Tangshan (BTT) region, which may be caused by the upwelling asthenosphere through the ZPFZ. 相似文献
15.
The Halasu porphyry copper belt situated in the East Junggar is one of the major porphyry copper belts in Xinjiang Uygur Autonomous Region, northwest China. Copper and molybdenum mineralization occurs as disseminated sulfides or veinlets mainly in granodiorite porphyry and diorite porphyry, with the intense development of zoned alteration from potassic, through sericitic to an outer zone of propylitic alteration.New LA–ICP-MS zircon U–Pb dating reveals that magmatism in the belt can be divided into three periods during the Middle Devonian and Early Carboniferous, namely the pre-mineralization stage of 390 Ma, syn-mineralization stage of 382–372 Ma, and post-mineralization stage of 350–320 Ma. The syn-mineralization intrusions are calc-alkaline, whereas pre- and post-mineralization intrusions are shoshonitic and high-K calc-alkaline. The syn-mineralization intrusions are enriched in highly incompatible trace elements but depleted in Nb, Ta, Hf and Ti relative to the pre- and post-mineralization intrusions.Zircon trace elements analyses demonstrate a negative correlation between Ti-in-zircon temperatures and oxygen fugacity. Ore-bearing syn-mineralization granitoids are characterized by higher water content, oxygen fugacity and low temperatures with higher mineralization potential than pre- and post-mineralization ones. These characteristics, together with the geochemical signature of the intrusions, suggest that the ore-bearing porphyries are derived from relative high ƒH2O magma reservoir. The remarkably homogeneous Hf isotopic compositions (εHf(t) = 8 to 13) from syn-mineralization intrusions span over 10 m.y., suggesting the existence of a long-lived reservoir beneath Halasu belt during the Middle Devonian. All the intrusions have low initial 87Sr/86Sr values (0.703935 to 0.707172), high εNd(t) values (4.7 to 5.5) and young crustal model ages (650 to 750 Ma). Combined with the mantle-derived Pb isotope characteristics, the Sr–Nd–Hf data suggest that the parental magma was probably derived from flat subduction triggered partial melting of juvenile crust generated during subduction–accretionary process with no significant input of old crust, whereas pre-mineralization and post-mineralization intrusions are supposed to emplaced in immature island arc setting and post-orogenic setting, respectively. 相似文献
16.
Large desiccation cracks were discovered in the intertidal zone of Zhoushan archipelago, East China Sea. Radiocarbon dating showed that desiccation cracks were formed around 31.2–30.4 cal ka BP. Palynological, mineralogical, and elemental geochemical analyses indicated that the cracks were formed as the result of an abrupt climate shift event. The climate changed from warm and humid, to cold and arid, and back to warm and humid again. This climate event is quite likely linked to Heinrich event 3 via the East Asian Monsoon. Desiccation cracks may provide a new proxy material for studying paleoclimate and paleoenvironment in the Quaternary. 相似文献
17.
We present a 3D thermochemical model of the North China Craton (NCC) from the surface down to 350 km by jointly inverting surface wave phase velocity data, geoid height, surface heat flow and absolute elevation with a multi-observable probabilistic inversion method. Our model reveals a thin (~ 65–100 km) and chemically fertile lithosphere (87 < Mg# < 90) beneath the Eastern NCC, consistent with independent results from mantle xenoliths, and supports the idea that the Eastern NCC experienced significant lithospheric destruction and refertilization during the Phanerozoic. In contrast, beneath the Trans-North China Orogen, Inner Mongolia Suture Zone and Yinshan belt, we observe a more heterogeneous (chemically and thermally) lithosphere, indicating that these areas have been partly involved in lithospheric modification and mechanical erosion at multiple scales. A cold and chemically refractory (Mg# > 90) lithospheric mantle is imaged beneath the central TNCO and Ordos Block, reaching depths > 260 km. This lithospheric “keel” is surrounded to the east by a high-temperature sublithospheric anomaly that originates at depths > 280 km. The spatial distribution of this anomaly and its correlation with the location of recent volcanism in the region suggest that the anomaly represents a deep mantle upwelling being diverted by the cratonic keel and spreading onto regions of shallow lithosphere. Our results indicate that the present-day thermochemical structure beneath the NCC is the result of a complex interaction between a large-scale return flow associated with the subduction of the Pacific slab and the shallow lithospheric structure. 相似文献
18.
This paper presents a numerical procedure to explore how hydraulic conductivity anisotropy and strength anisotropy affect the stability of stratified, poorly cemented rock slopes. The results provide information about the anisotropic characteristics of the medium, including the orientation of bedding planes, the anisotropic ratios of the hydraulic conductivity and the geological significance of the hydraulic conductivity anisotropy on the pore water pressure (PWP) estimation of finite slopes. Neglecting the hydraulic conductivity anisotropy of a slope with horizontal layers leads to a 40% overestimation of the safety factor. For a dip slope with inclined layers with θ = 30°, including the strength anisotropy caused a 25% reduction of the safety factor compared to the cases which isotropic strength is assumed. This paper highlights the importance of the hydraulic-conductivity anisotropy and the strength anisotropy on the stability of stratified, poorly cemented rock slopes. 相似文献
19.
岩石圈地幔结构及其对中国大型盆地的演化意义 总被引：5，自引：1，他引：4
Pn波是通过莫霍面下方的上地幔顶部的地震波.由于Pn波的速度随温度和物质成分而变化, 以及Pn波各向异性可以反映地幔形变的历史.因此Pn波的速度以及各向异性成为探索岩石圈结构的重要工具.中国岩石圈地幔的Pn速度的特征是很高速的异常区和很低速的异常区呈镶嵌状出现, 反映了地质结构的不均匀性.西部大型盆地(塔里木、准噶尔、吐哈、柴达木和四川盆地) 具有较高的Pn速度和较弱的各向异性, 反映出这些盆地的岩石圈是冷的和坚硬的, 其变形较小.大面积的华北地区, 在太古代的基底下具有明显的Pn波低速度.研究结果表明与这些地区裂谷、岩石圈减薄和地幔上涌区相一致.Pn波各向异性与在最新(和目前正在进行) 的大规模变形期间, 岩石圈地幔沿NNE向右旋简单剪切相一致.华北的金矿藏以及华北和松辽盆地的石油储藏的位置明显地与该区的低Pn波速度区相吻合, 表明该区金属成矿和油储的形成与中、新生代以来在岩石圈地幔中的热活动, 以及壳幔之间的相互作用过程密切相关. 相似文献
20.
We present a 3D S-velocity model for the crust and upper mantle of the South China Sea and the surrounding regions, constrained from the analysis of over 12,000 of fundamental Rayleigh wave dispersion curves between 10 s and 150 s periods. The lateral resolution was found to vary from 2° to 4° with the increasing period over the study region. A robust scheme of Debayle and Sambridge allowed us to conduct the tomographic inversion efficiently for massive datasets. Group velocity maps varying with period show lateral heterogeneities, well related to the geological and tectonic features in the study region. The 3D S-velocity model was constructed from the 1D structure inversion of the tomographic group velocity dispersion curves at each node. The obtained average crustal structure is similar to the PREM model, while the average mantle velocity is typically lower than the global average. The complicated 3D structures reveal three prominent features correlated with geological divisions: sea basin regions, island and arc regions, and continental regions. The derived crustal and lithospheric thicknesses range from ∼15 to >50 km and from ∼60 to >140 km, respectively, with the thinnest in the South China Sea, the thickest in eastern Tibet and the Yangtze Block, and the medium in the South China Fold Belt, Indochina, and island arc regions. Our results further confirm that (1) a Mesozoic subduction zone, which is interpreted as the tectonic weak zone during the Paleogene, exists along the South China margin; (2) the influence of the Indochina extrusion along the Red River Fault is limited for the South China Sea region; (3) there is a slab remnant of the proto-South China Sea beneath Borneo. New findings suggest that the Mesozoic subduction zone should be built into any evolution model for the region, as well as the other two major tectonic boundaries of the Red River Fault and proto-South China Sea subduction zone. 相似文献