共查询到20条相似文献，搜索用时 734 毫秒
1.
《Gondwana Research》2014,25(3-4):849-864
We have imaged the lithospheric structure beneath the central and western North China Craton (NCC) with Rayleigh wave tomography. The Rayleigh waveforms of 100 teleseismic events recorded by 208 broadband stations are used to yield high-resolution phase velocity maps at 13 periods from 20 s to 143 s. A 3-D S-wave velocity model is constructed based on the phase velocity maps. Our S-wave velocity model is broadly consistent with the results of previous tomography studies, but shows more detailed variations within the lithosphere. The Trans-North China Orogen (TNCO) is generally characterized by low-velocity anomalies but exhibits great heterogeneities. Two major low-velocity zones (LVZs) are observed in the north and south, respectively. The northern LVZ laterally coincides with sites of Cenozoic magmatism and extends to depths greater than 200 km. We propose that a small-scale mantle upwelling is present, confined to the north of the TNCO. A high-velocity patch in the uppermost mantle is also observed between the two LVZs adjacent to the narrow transtensional zone of the Cenozoic Shanxi–Shaanxi Rift (SSR). We interpret this as the remnant of a cratonic mantle root. The Ordos Block in the western NCC is associated with high-velocity anomalies, similarly reflecting the existence of cratonic mantle root, but a discernible low-velocity layer is observed at depths of 100–150 km in this location. We interpret that this mid-lithospheric structure was probably formed by metasomatic processes during the early formation of the NCC. Based on the observations from our S-wave velocity model, we conclude that the current highly heterogeneous lithospheric structure beneath the TNCO is the result of multiphase reworking of pre-existing mechanically weak zones since the amalgamation of the craton. The latest Cenozoic lithospheric reworking is dominated by the far-field effects of both Pacific plate subduction and the India–Eurasia collision. 相似文献
2.
We present a 3D thermochemical model of the North China Craton (NCC) from the surface down to 350 km by jointly inverting surface wave phase velocity data, geoid height, surface heat flow and absolute elevation with a multi-observable probabilistic inversion method. Our model reveals a thin (~ 65–100 km) and chemically fertile lithosphere (87 < Mg# < 90) beneath the Eastern NCC, consistent with independent results from mantle xenoliths, and supports the idea that the Eastern NCC experienced significant lithospheric destruction and refertilization during the Phanerozoic. In contrast, beneath the Trans-North China Orogen, Inner Mongolia Suture Zone and Yinshan belt, we observe a more heterogeneous (chemically and thermally) lithosphere, indicating that these areas have been partly involved in lithospheric modification and mechanical erosion at multiple scales. A cold and chemically refractory (Mg# > 90) lithospheric mantle is imaged beneath the central TNCO and Ordos Block, reaching depths > 260 km. This lithospheric “keel” is surrounded to the east by a high-temperature sublithospheric anomaly that originates at depths > 280 km. The spatial distribution of this anomaly and its correlation with the location of recent volcanism in the region suggest that the anomaly represents a deep mantle upwelling being diverted by the cratonic keel and spreading onto regions of shallow lithosphere. Our results indicate that the present-day thermochemical structure beneath the NCC is the result of a complex interaction between a large-scale return flow associated with the subduction of the Pacific slab and the shallow lithospheric structure. 相似文献
3.
We investigated the seismic shear-wave velocity structure of the crust beneath nine broadband seismological stations of the Shillong–Mikir plateau and its adjoining region using teleseismic P-wave receiver function analysis. The inverted shear wave velocity models show ∼34–38 km thick crust beneath the Shillong Plateau which increases to ∼37–38 km beneath the Brahmaputra valley and ∼46–48 km beneath the Himalayan foredeep region. The gradual increase of crustal thickness from the Shillong Plateau to Himalayan foredeep region is consistent with the underthrusting of Indian Plate beyond the surface collision boundary. A strong azimuthal variation is observed beneath SHL station. The modeling of receiver functions of teleseismic earthquakes arriving the SHL station from NE backazimuth (BAZ) shows a high velocity zone within depth range 2–8 km along with a low velocity zone within ∼8–13 km. In contrast, inversion of receiver functions from SE BAZ shows high velocity zone in the upper crust within depth range ∼10–18 km and low velocity zone within ∼18–36 km. The critical examination of ray piercing points at the depth of Moho shows that the rays from SE BAZ pierce mostly the southeast part of the plateau near Dauki fault zone. This observation suggests the effect of underthrusting Bengal sediments and the underlying oceanic crust in the south of the plateau facilitated by the EW-NE striking Dauki fault dipping 300 toward northwest. 相似文献
4.
《Journal of African Earth Sciences》2011,61(5):328-336
The ∼500,000 km2 Saharan Metacraton in northern Africa (metacraton refers to a craton that has been mobilized during an orogenic event but that is still recognisable through its rheological, geochronological and isotopic characteristics) is an Archean–Paleoproterozoic cratonic lithosphere that has been destabilized during the Neoproterozoic. It extends from the Arabian–Nubian Shield in the east to the Trans-Saharan Belt in the west, and from the Oubanguides Orogenic Belt in the south to the Phanerozoic cover of North Africa. Here, we show that there are high S-wave velocity anomalies in the upper 100 km of the mantle beneath the metacraton typical of cratonic lithosphere, but that the S-wave velocity anomalies in the 175–250 km depth are much lower than those typical of other cratons. Cratons have possitive S-wave velocity anomalies throughout the uppermost 250 km reflecting the presence of well-developed cratonic root. The anomalous upper mantle structure of the Saharan Metacraton might be due to partial loss of its cratonic root. Possible causes of such modification include mantle delamination or convective removal of the cratonic root during the Neoproterozoic due to collision-related deformation. Partial loss of the cratonic root resulted in regional destabilization, most notably in the form of emplacement of high-K calc-alkaline granitoids. We hope that this work will stimulate future multi-national research to better understand this part of the African Precambrian. Specifically, we call for efforts to conduct systematic geochronological, geochemical, and isotopic sampling, deploy a reasonably-dense seismic broadband seismic network, and conduct systematic mantle xenoliths studies. 相似文献
5.
Lithospheric thinning beneath the North China Craton is widely recognized, but whether the Yangtze block has undergone the same process is a controversial issue. Based on a detailed petrographic study, a suite of xenoliths from the Lianshan Cenozoic basalts have been analyzed for the compositions of minerals and whole rocks, and their Sr–Nd isotopes to probe the nature and evolution of the subcontinental lithospheric mantle beneath the lower Yangtze block. The Lianshan xenoliths can be subdivided into two Types: the main Type 1 xenoliths (9–15% clinopyroxene and olivine-Mg# < 90) and minor Type 2 peridotites (1.8–6.2% clinopyroxene and olivine-Mg# > 90). Type 1 peridotites are characterized by low MgO, high levels of basaltic components (i.e., Al2O3, CaO and TiO2), LREE-depleted patterns in clinopyroxenes and whole rocks, and relatively high 143Nd/144Nd (0.513219–0.513331) and low 86Sr/87Sr (0.702279–0.702789). These features suggest that Type 1 peridotites represent fragments of the newly accreted fertile lithospheric mantle that have undergone ~ 1% of fractional partial melting and later weak silicate–melt metasomatism, similar to Phanerozoic lithospheric mantle beneath the eastern North China Craton. Type 2 peridotites may be shallow relics of the older lithospheric mantle depleted in basaltic components, with LREE-enriched and HREE-depleted patterns, relatively low 143Nd/144Nd (0.512499–0.512956) and high 86Sr/87Sr (0.703275–0.703997), which can be produced by 9–14% partial melting and subsequent carbonatite–melt metasomatism. Neither type shows a correlation between equilibration temperatures and Mg# in olivine, indicating that the lithospheric mantle is not compositionally stratified, but both types coexist at similar depths. This coexistence suggests that the residual refractory lithospheric mantle (i.e., Type 2 peridotites) may be irregularly eroded by upwelling asthenosphere materials along weak zones and eventually replaced to create a new and fertile lithosphere mantle (i.e., Type 1 xenoliths) as the asthenosphere cooled. Therefore, the subcontinental lithospheric mantle beneath the lower Yangtze block shared a common evolutional dynamic environment with that beneath the eastern North China Craton during late Mesozoic–Cenozoic time. 相似文献
6.
A passive seismic experiment across the Longmenshan (LMS) fault belt had been conducted between August 2006 and July 2007 for the understanding of geodynamic process between the Eastern Tibet and Sichuan basin. We herein collected 3677 first P arrival times with high precision from seismograms of 288 teleseismic events so as to reconstruct the upper mantle velocity structure. Our results show that the depth of the Lithosphere–asthenosphere boundary (LAB) changes from 70 km beneath Eastern Tibet to about 110 km beneath Longquanshan, Sichuan Basin, which is consistent with the receiver function imaging results. The very thin mantle part of the lithosphere beneath Eastern Tibet may suggest the lithosphere delamination due to strong interaction between the Tibetan eastward escaping flow and the rigid resisting Sichuan basin, which can be further supported by the existences of two high-velocity anomalies beneath LAB in our imaging result. We also find there are two related low-velocity anomalies beneath the LMS fault belt, which may indicate magmatic upwelling from lithosphere delamination and account for the origin of tremendous energy needed by the devastating Wenchuan earthquake. 相似文献
7.
Although orogeny tapers off in western Taiwan large and small earthquakes do occur in the Taiwan Strait, a region largely untouched in previous studies owing mostly to logistical reasons. But the overall crustal structure of this region is of particular interest as it may provide a hint of the proto-Taiwan before the orogeny.By combining time domain empirical Green’s function (TDEGF) from ambient seismic noise using station-pairs and traditional surface wave two-station method (TS) we are able to construct Rayleigh wave phase velocity dispersion curves between 5 and 120 s. Using Broadband Array in Taiwan for Seismology (BATS) stations in Taiwan and in and across the Strait we are able to derive average 1-D Vs structures in different parts of this region. The results show significant shear velocity differences in the upper 15 km crust as expected. In general, the highest Vs in the upper crust observed in the coastal area of Mainland China and the lowest Vs appears along the southwest offshore of the Taiwan Island; they differ by about 0.6–1.1 km/s. For different parts of the Strait, the upper crust Vs structures are lower in the middle by about 0.1–0.2 km/s relative to those in the northern and southern parts. The upper mantle Vs structure (Moho – 150 km) beneath the Taiwan Strait is about 0.1–0.3 km/s lower than the AK135 model. The overall crustal thickness is approximately 30 km, much thinner and less variable than under the Taiwan Island. The inversion of seismic velocity structures using shorter period band dispersion data in the sea areas with water depth deeper than 1000 m should take water layer into consideration except for the continental shelves. 相似文献
8.
Harro Schmeling 《Tectonophysics》2010,480(1-4):33-47
Active or passive continental rifting is associated with thinning of the lithosphere, ascent of the asthenosphere, and decompressional melting. This melt may percolate within the partially molten source region, accumulate and be extracted. Two-dimensional numerical models of extension of the continental lithosphere–asthenosphere system are carried out using an Eulerian visco-plastic formulation. The equations of conservation of mass, momentum and energy are solved for a multi-component (crust–mantle) and two-phase (solid–melt) system. Temperature-, pressure-, and stress-dependent rheologies based on laboratory data for granite, pyroxenite and olivine are used for the upper and lower crust, and mantle, respectively. Rifting is modelled by externally prescribing a constant rate of widening with velocities between 2.5 and 40 mm/yr. A typical extension experiment is characterized by 3 phases: 1) distributed extension, with superimposed pinch and swell instability, 2) lithospheric necking, 3) continental break up, followed by oceanization. The timing of the transition from stages 1) to 2) depends on the presence and magnitude of a localized perturbation, and occurs typically after 100–150 km of total extension for the lithospheric system studied here. This necking phase is associated with a pronounced negative topography (“rift valley”) and a few 100 m of rift flanks. The dynamic part of this topography amounts to about 1 km positive topography. This means, if rifting stops (e.g. due to a drop of external forces), immediate additional subsidence by this amount is predicted. Solidification of ascended melt beneath rift flanks leads to basaltic enrichment and underplating beneath the flanks, often observed at volcanic margins. After continental break up, a second time-dependent upwelling event off the rift axis beneath the continental margins is found, producing further volcanics. Melting has almost no or only a small accelerating effect on the local extension value (β-value) for a constant external extension rate. Melting has an extremely strong effect on the upwelling velocity within asthenospheric wedge beneath the new rift. This upwelling velocity is only weakly dependent on the rifting velocity. The melt induced sublithospheric convection cell is characterized by downwelling flow beneath rift flanks. Melting increases the topography of the flanks by 100–200 m due to depletion buoyancy. Another effect of melting is a significant amplification of the central subsidence due to an increase in localized extension/subsidence. Modelled magma amounts are smaller than observed for East African Rift System. Increasing the mantle temperature, as would be the case for a large scale plume head, better fits the observed magma volumes. If extension stops before a new ocean is formed, melt remains present, and convection remains active for 50–100 Myr, and further subsidence is significant. 相似文献
9.
《Gondwana Research》2014,25(3-4):1172-1202
The Shandong Province along the southeastern margin of the North China Craton is the largest gold producing region in China. The nature and extent of gold metallogeny between the Western Shandong (Luxi) and Eastern Shandong (Jiaodong) sectors display marked contrast. In this paper, we synthesize the information on mineralization and magmatism, S–Pb–H–O–C–He–Ar isotopic data of the ores and Sr–Nd–Pb–Hf isotopic data of the Mesozoic plutons from the Shandong region. Combined with the salient regional geophysical data, we discuss the geodynamic setting of the gold mineralization in Shandong. The age data converge to indicate that the peak of gold metallogeny in this region occurred at ca. 120 ± 10 Ma. The mineralization in Luxi area shows links with sources in the Tongjing and Yinan complexes. The ore-forming materials in the Jiaodong area were derived from multiple sources and show clear evidence for crust–mantle mixing. The Moho depth on both sides of the Tan–Lu fault is broadly similar with only a minor variation across the Tan–Lu fault. The LAB (lithosphere–asthenosphere boundary) in the Jiaodong region is shallower than that in the Luxi area. The Tan–Lu fault is identified as a major corridor for asthenosphere upwelling. Geochemical features show that the mantle beneath the Luxi area is mainly of EM1 type, whereas the mantle in the eastern part, close to the Tan–Lu fault shows mixed EM1 and EM2 features. In contrast, the mantle beneath the Jiaodong area is mainly of EM2 type, suggesting the existence of more ancient lithospheric mantle beneath the Luxi area, in comparison to the extensively modified lithospheric mantle and asthenosphere beneath the Jiaodong area. The gold metallogeny in Shandong Province occurred in the geodynamic setting of lithospheric thinning. The differences in the character and intensity of gold mineralization between the Western and Eastern Shandong regions might be a reflection of the contrasting tectonic histories. The Western Shandong region preserves imprints of destruction through the Yangtze plate collision which probably marks the prelude for gold metallogeny in Jiaodong area. Subsequent magmatic input and cratonic destruction through Pacific plate subduction provided the settings for the later widespread mineralization in multiple phases. 相似文献
10.
Rrapo Ormeni 《Tectonophysics》2011,497(1-4):114-121
This paper describes the one-dimensional (1D) velocity model computed by VELEST in the SEISAN seismic analysis system, inverting re-picked P-wave and S-wave arrival times recorded during 2002–2006 by the Albanian, Montenegro, Thessalonica and Macedonia seismic networks. The re-picked data yield P-wave and S-wave velocities proved to be more suitable compared to bulletin data for this detailed inversion study. Seismic phases recorded by the Albania seismic network and integrated with data from the Montenegro, Thessalonica and Macedonia networks are used to prepare the Albanian seismic bulletin. Earthquake hypocenters from the Albanian bulletins have also location errors that are negligible for civil protection purposes, large scale seismotectonic analyses and more accurate hypocentral determinations which are necessary for detailed seismotectonic and geodynamic studies.It was noted that the smoothness of the velocity variation increased with depth. A velocity of 5.5 km/s was calculated for the upper crust, 6.1 km/s was calculated for the middle crust and 6.9 km/s was computed for the lower crust. P wave velocity was 7.85 km/s at depth of 50 km and for the upper mantle it is 8.28 km/s. Using the improved velocity model, the earthquakes which occurred in Albania in the past 5 years were able to be relocated, achieving constrained hypocentral determinations for events in Albania. The interpretation of the 1 D velocity models infers interesting features of the deep structure of Albania. These results represent an important step towards more detailed seismotectonic analyses. 相似文献
11.
《Gondwana Research》2013,23(3-4):1060-1067
Convergence between the Indian plate and the Eurasian plate has resulted in the uplift of the Tibetan Plateau, and understanding the associated dynamical processes requires investigation of the structures of the crust and the lithosphere of the Tibetan Plateau. Yunnan is located in the southwest edge of the plateau and adjacent to Myanmar to the west. Previous observations have confirmed that there is a sharp transition in mantle anisotropy in this area, as well as clockwise rotations of the surface velocity, surface strain, and fault orientation. We use S receiver functions from 54 permanent broad-band stations to investigate the structures of the crust and the lithosphere beneath Yunnan. The depth of the Moho is found to range from 36 to 40 km beneath southern Yunnan and from 55 to 60 km beneath northwestern Yunnan, with a dramatic variation across latitude 25–26°N. The depth of the lithosphere–asthenosphere boundary (LAB) ranges from 180 km to less than 70 km, also varying abruptly across latitude 25–26°N, which is consistent with the sudden change of the fast S-wave direction (from NW–SE to E–W across 26–28°N). In the north of the transition belt, the lithosphere is driven by asthenospheric flow from Tibet, and the crust and the upper mantle are mechanically coupled and moving southward. Because the northeastward movement of the crust in the Burma micro-plate is absorbed by the right-lateral Sagaing Fault, the crust in Yunnan keeps the original southward movement. However, in the south of the transition belt, the northeastward mantle flow from Myanmar and the southward mantle flow from Tibet interact and evolve into an eastward flow (by momentum conservation) as shown by the structure of the LAB. This resulting mantle flow has a direction different from that of the crustal movement. It is concluded that the Sagaing Fault causes the west boundary condition of the crust to be different from that of the lithospheric mantle, thus leading to crust–mantle decoupling in Yunnan. 相似文献
12.
Based on passive seismic interferometry applied to ambient seismic noise recordings between station pairs belonging to a small-scale array, we have obtained shear wave velocity images of the uppermost materials that make up the Dead Sea Basin. We extracted empirical Green’s functions from cross-correlations of long-term recordings of continuous data, and measured inter-station Rayleigh wave group velocities from the daily correlation functions for positive and negative correlation time lags in the 0.1–0.5 Hz bandwidth. A tomographic inversion of the travel times estimated for each frequency is performed, allowing the laterally varying 3-D surface wave velocity structure below the array to be retrieved. Subsequently, the velocity-frequency curves are inverted to obtain S-wave velocity images of the study area as horizontal depth sections and longitude- and latitude-depth sections. The results, which are consistent with other previous ones, provide clear images of the local seismic velocity structure of the basin. Low shear velocities are dominant at shallow depths above 3.5 km, but even so a spit of land with a depth that does not exceed 4 km is identified as a salt diapir separating the low velocities associated with sedimentary infill on both sides of the Lisan Peninsula. The lack of low speeds at the sampling depth of 11.5 km implies that there are no sediments and therefore that the basement is near 10–11 km depth, but gradually decreasing from south to north. The results also highlight the bowl-shaped basin with poorly consolidated sedimentary materials accumulated in the central part of the basin. The structure of the western margin of the basin evidences a certain asymmetry both whether it is compared to the eastern margin and it is observed in north–south direction. Infill materials down to ∼8 km depth are observed in the hollow of the basin, unlike what happens in the north and south where they are spread beyond the western Dead Sea shore. 相似文献
13.
《Gondwana Research》2013,24(4):1455-1483
The crust and upper mantle in mainland China were relatively densely probed with wide-angle seismic profiling since 1958, and the data have provided constraints on the amalgamation and lithosphere deformation of the continent. Based on the collection and digitization of crustal P-wave velocity models along related wide-angle seismic profiles, we construct several crustal transects across major tectonic units in mainland China. In our study, we analyzed the seismic activity, and seismic energy releases during 1970 and 2010 along them. We present seismogenic layer distribution and calculate the yield stress envelopes of the lithosphere along the transects, yielding a better understanding of the lithosphere rheology strength beneath mainland China. Our results demonstrate that the crustal thicknesses of different tectonic provinces are distinctively different in mainland China. The average crustal thickness is greater than 65 km beneath the Tibetan Plateau, about 35 km beneath South China, and about 36–38 km beneath North China and Northeastern China. For the basins, the thickness is ~ 55 km beneath Qaidam, ~ 50 km beneath Tarim, ~ 40 km beneath Sichuan and ~ 35 km beneath Songliao. Our study also shows that the average seismic P-wave velocity is usually slower than the global average, equivalent with a more felsic composition of crust beneath the four tectonic blocks of mainland China resulting from the complex process of lithospheric evolution during Triassic and Cenozoic continent–continent and Mesozoic ocean–continent collisions. We identify characteristically different patterns of seismic activity distribution in different tectonic blocks, with bi-, or even tri-peak distribution of seismic concentration in South Tibet, which may suggest that crustal architecture and composition exert important control role in lithosphere deformation. The calculated yield stress envelopes of lithosphere in mainland China can be divided into three groups. The results indicate that the lithosphere rheology structure can be described by jelly sandwich model in eastern China, and crème brulee models with weak and strong lower crust corresponding to lithosphere beneath the western China and Kunlun orogenic belts, respectively. The spatial distribution of lithospheric rheology structure may provide important constraints on understanding of intra- or inter-plate deformation mechanism, and more studies are needed to further understand the tectonic process(es) accompanying different lithosphere rheology structures. 相似文献
14.
《Journal of African Earth Sciences》2011,59(5):820-828
The shear velocity structure beneath the Virunga volcanic area was estimated by using an average solution in the time domain inversion of stacked teleseismic receiver functions provided by two seismic broadband stations KUNENE (KNN) and KIBUMBA (KBB). These two stations are 29 km apart and located at the eastern and western escarpment of the Western Rift Valley of Africa in the Virunga area, respectively. The velocity model was presented as P-wave velocity models. From these models, the crust mantle transition zone beneath the area sampled by KNN and KBB in the Virunga area was determined at depth from about 36 to 39 km and 30 to 41 km, respectively. A low velocity zone was observed below stations KNN and KBB at depths between 20–30 km and 18–28 km, respectively, and with average velocity 5.9 km/s and 6.0 km/s. This low velocity zone may probably related to a magma chamber or a melt-rich sill. The models show also high velocity material (6.8–7.4 km/s) lying beneath stations KNN and KBB at depths 3–20 km and 3–10 km, respectively, which is indicative of magma cumulates within the volcanic edifice. The result obtained in this study was applied to the determination of epicentres during the period prior to the 27 November 2006 Nyamuragira eruption. This eruption was preceded by a swarm of hybrid volcanic earthquakes with clear P-waves onset. Using the receiver function model was found to improve the location of events. The located events correlate well with the location of the eruptive site and data provided by the INSAR observations of surface deformation associated with eruption. 相似文献
15.
《Russian Geology and Geophysics》2014,55(10):1239-1247
The mantle structure in Central Asia was investigated by surface-wave tomography from dispersion of the fundamental mode of the Rayleigh wave group velocities along more than 3200 earthquake-station paths within 40° N to 60° N and 80° E to 132° E. The velocities were processed by the frequency-time analysis at periods from 10 to 250 s to obtain their dispersion curves. Then group velocity maps were computed separately for each period, at different sampling intervals: at every 5 s for the short periods from 10 to 30 s, at 10 s for periods between 30 and 100 s, and at 25 s for the longest periods of 100 to 250 s. Resolution was estimated according to the effective averaging radius (R) and presented likewise in the form of maps. To estimate the depths of the revealed inhomogeneties, locally averaged dispersion curves were calculated using the group velocity maps, with reference to the radius R, and were then inverted to S-wave velocity-depth profiles. The resulting three-dimensional S-wave velocity structure to depths of about 700 km revealed large lateral inhomogeneties through the entire depth range. This pattern may be due to the history of the major tectonic structures, as well as to ongoing processes in the mantle. 相似文献
16.
Distant earthquake data recorded by seven sub-arrays of the ongoing WOMBAT rolling seismic array deployment in southeast Australia are combined for the first time to constrain 3-D variations in upper mantle P-wavespeed via teleseismic tomography. The seven arrays comprise a total of 276 short period recorders spaced at intervals of approximately 50 km, thus allowing unprecedented resolution of the upper mantle over a large region. In the mantle lithosphere immediately below the crust (~ 50 km depth), dominant variations in velocity tend to strike east–west, and share little resemblance to Palaeozoic boundaries in the shallow crust inferred from surface geology and potential field data. A broad region of elevated wavespeed beneath northern Victoria may represent the signature of underplated igneous rocks associated with detachment faulting during the break-up of Australia and Antarctica. A distinct low velocity anomaly in southern Victoria appears to correlate well with the Quaternary Newer Volcanic Provinces. Towards the base of the mantle lithosphere, the dominant structural trend becomes north–south, and five distinct velocity zones become apparent. Of particular note is a transition from higher wavespeed in the west to lower wavespeed in the east beneath the Stawell Zone, implying that the Proterozoic lithosphere of the Delamerian Orogen protrudes eastward beneath the Western subprovince of the Lachlan Orogen. This transition zone extends northwards from southern Victoria into central New South Wales (the northward limit of the arrays), and is one of the dominant features of the model. Further east, there is a transition from lower to higher wavespeeds in the vicinity of the boundary between the Western and Central subprovinces of the Lachlan Orogen, which has several plausible explanations, including the existence of a Proterozoic continental fragment beneath the Wagga–Omeo Zone. The presence of elevated wavespeeds beneath the Melbourne Zone in Victoria, although not well constrained due to limited data coverage, provides some support to the Selwyn Block model, which proposes a northward extension beneath Bass Strait of the Proterozoic core of Tasmania. 相似文献
17.
We present a new set of contour maps of the seismic structure of South America and the surrounding ocean basins. These maps include new data, helping to constrain crustal thickness, whole-crustal average P-wave and S-wave velocity, and the seismic velocity of the uppermost mantle (Pn and Sn). We find that: (1) The weighted average thickness of the crust under South America is 38.17 km (standard deviation, s.d. ±8.7 km), which is ∼1 km thinner than the global average of 39.2 km (s.d. ±8.5 km) for continental crust. (2) Histograms of whole-crustal P-wave velocities for the South American crust are bi-modal, with the lower peak occurring for crust that appears to be missing a high-velocity (6.9–7.3 km/s) lower crustal layer. (3) The average P-wave velocity of the crystalline crust (Pcc) is 6.47 km/s (s.d. ±0.25 km/s). This is essentially identical to the global average of 6.45 km/s. (4) The average Pn velocity beneath South America is 8.00 km/s (s.d. ±0.23 km/s), slightly lower than the global average of 8.07 km/s. (5) A region across northern Chile and northeast Argentina has anomalously low P- and S-wave velocities in the crust. Geographically, this corresponds to the shallowly-subducted portion of the Nazca plate (the Pampean flat slab first described by Isacks et al., 1968), which is also a region of crustal extension. (6) The thick crust of the Brazilian craton appears to extend into Venezuela and Colombia. (7) The crust in the Amazon basin and along the western edge of the Brazilian craton may be thinned by extension. (8) The average crustal P-wave velocity under the eastern Pacific seafloor is higher than under the western Atlantic seafloor, most likely due to the thicker sediment layer on the older Atlantic seafloor. 相似文献
18.
We here present the results of the inverse modeling of crustal S-phases recorded from a 400-km-long seismic profile, with azimuth nearly N30W, from Lianxian, near Hunan Province, to Gangkou Island, near Guangzhou City, Guangdong Province, in the southern margin of South China continent. The finding in this case is that many shot gathers provided by this wide-angle seismic experiment show relatively strong reflected and refracted S-phases, in particular some crustal refractions (Sg waves) and Moho reflections (SmS waves or simply Sm waves). The P-wave velocity structure of the crust and uppermost mantle was already obtained through the interpretation of vertical-component shot gathers. Now, with constraints introduced by the P-wave velocity architecture and after picking up S-wave traveltime data on the seismograms, we have obtained the S-velocity model of the crust by adjusting these traveltimes but keeping the geometry of the crustal reflectors. Our results demonstrate: (1) the average crustal S-velocity is about 3.64 km/s to the northwest of the Wuchuan-Sihui fault, and 3.62 km/s to the southeast of this fault; (2) relatively constant S-velocity of about 3.42 km/s for the upper crust, 3.55 km/s for the middle crust and laterally varying shear velocity around 3.82 km/s for the lower crust; (3) correspondingly, Vp/Vs ratio is 1.73 for the upper crust, 1.71 for the middle crust and 1.74 for the lower crust. Both shear velocities and Vp/Vs ratio correlate well with the major active faults that break the study area, and show significant changes especially in the upper crust. High Poisson’s ratio (1.8) is observed at shallow depth beneath the Minzhong depression to the southeast of the Wuchuan-Sihui fault and the Huiyuan depression in the southern margin of South China continent. In contrast, a very low Vp/Vs ratio (1.68) is observed between 8 and 14 km depth beneath Huiyuan. At deeper depth, a high Vp/Vs ratio (1.76) is observed in the lower crust beneath the Minzhong depression. 相似文献
19.
《Russian Geology and Geophysics》2014,55(7):892-906
Modeling of the seismic, thermal, and density structure of the Siberian craton lithospheric mantle at depths of 100-300 km has been performed along the superlong Meteorite and Rift seismic profiles. The 2D velocity sections reflect the specific features of the internal structure of the craton: lateral inhomogeneities, seismic-boundary relief at depths of ~ 100, 150, 240, and 300 km, velocities of 8.3-8.7 km/s, and the lack of low-velocity zone in the lower lithosphere. Mapping of the thermal state along the Meteorite and Rift profiles shows a significant temperature decrease in the cratonic mantle as compared with the average temperatures of the surrounding Phanerozoic mantle (> 300 °C) estimated from the global reference model AK135. Lateral temperature variations, reflecting the thermal anomalies in the cratonic keel, are observed at depths of < 200 km (with some decrease in temperature in the central part of the craton), whereas at depths of > 200 km, temperature variations are negligible. This suggests the preservation of residual thermal perturbations at the base of the lithosphere, which must lead to the temperature equalization in the transition zone between the lithosphere and the asthenosphere. Variations in chemical composition have a negligible effect on the thermal state but affect strongly the density structure of the mantle. The results of modeling admit a significant fertilization of matter at depths more than 180-200 km and stratification of the cratonic mantle by chemical composition. The thicknesses of chemical (petrologic) and thermal boundary layers beneath the Siberian craton are estimated. The petrologic lithosphere is localized at depths of ~ 200 km. The bottom of the thermal boundary layer is close to the 1450 °C isotherm and is localized at a depth of 300 km, which agrees with heat flow and seismic-tomography data. 相似文献
20.
《Gondwana Research》2014,26(4):1690-1699
The continental collision between the Indian and Asian plates plays a key role in the geologic and tectonic evolution of the Tibetan plateau. In this article we present high-resolution tomographic images of the crust and upper mantle derived from a large number of high-quality seismic data from the ANTILOPE project in western Tibet. Both local and distant earthquakes were used in this study and 35,115 P-wave arrival times were manually picked from the original seismograms. Geological and geochemical results suggested that the subducting Indian plate has reached northward to the Lhasa terrane, whereas our new tomography shows that the Indian plate is currently sub-horizontal and underthrusting to the Jinsha river suture at depths of ~ 100 to ~ 250 km, suggesting that the subduction process has evolved over time. The Asian plate is also imaged clearly from the surface to a depth of ~ 100 km by our tomography, and it is located under the Tarim Basin north of the Altyn Tagh Fault. There is no obvious evidence to show that the Asian plate has subducted beneath western Tibet. The Indian and Asian plates are separated by a prominent low-velocity zone under northern Tibet. We attribute the low-velocity zone to mantle upwelling, which may account for the warm crust and upper mantle beneath that region, and thus explain the different features of magmatism between southern and northern Tibet. But the upwelling may not penetrate through the whole crust. We propose a revised geodynamic model and suggest that the high-velocity zones under Lhasa terrane may reflect a cold crust which has interrupted the crustal flow under the westernmost Tibetan plateau. 相似文献