首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
The Yulong Mountain massif is tectonically active during Quaternary and contains the southernmost glacierized mountains in China, and all of Eurasia. Past glacial remnants remain preserved on the east and west sides of the Yulong Mountains. A ridge of moraine protruded into the Jinsha River at the Daju Basin, damming the river, and forming a lake at the head of the Jinsha River. Cosmogenic 10Be and 26Al provide exposure age dates for the moraine-based fluvial terraces left behind after the dam breached, and for moraine boulders on both the eastern and western sides of the Yulong Mountains. Our results yield exposure ages for the terraces that range from 29 ka to 8 ka, and a downcutting rate of 7.6 m/ka. The preservation of the remaining dam for over 10,000 years suggests stability of the moraine dam and gradual erosion of the dam during drainage of the dammed lake. From the relationship between exposure ages and elevations of the fluvial terraces located in different walls of the Daju fault, we obtain a late Quaternary dip-slip rate of about 5.6 m/ka for the Daju fault. The exposure ages of 10.2 ka and 47 ka for moraine boulders located in the east and west sides of the Yulong Mountains, respectively, coincide with warm periods in the late Quaternary. This implies that precipitation provides the major control for glaciations on the Yulong Mountains, a domain of the southwest Asian monsoon.  相似文献   

2.
《Quaternary Science Reviews》2003,22(10-13):1339-1343
The Wangsan fault is exposed at Kyeongju, Korea. The andesite is unconformably covered by Quaternary alternating conglomerate and sandstone deposits. The unconformity is cut by the thrust fault which displaces a hanging wall block of about 30 m. Exposed at the surface of this fault is a light gray and brown fault gouge, about 40–120 cm thick. In order to test the consistency of ESR ages from a single fault gouge zone, we collected six gouge samples systematically along and across the Wangsan fault. We found that six samples collected from the same gouge zone show consistent ESR date estimates (average 550 ka). Because fault rock is rare along faults in unconsolidated sediments due to low confining stress near the surface, we consider that this fault gouge has been moved up with the hanging wall block along the fault. The estimated average uplift rate of the hanging wall block is about 0.04 cm/year based on the age of the displaced Quaternary deposits (vertical separation; about 20 m) dated by OSL dating methods. The depth of the fault gouge at the time of reactivation, which was estimated from uplift rate and the ESR ages, is about 220 m. Therefore, we conclude that the results of ESR age estimates represent the time of reactivation of the fault gouge at a depth of 220 m in the past during fault movement, because later movements which occurred during uplift near the surface may not have zeroed ESR signals significantly for ESR dating of fault movements.  相似文献   

3.
Different continental collision belts show contrasting metamorphic trend along their length, including the distribution of extreme metamorphism; i.e., ultrahigh-pressure (>100 km depth) and ultrahigh-temperature (900–1150 °C) metamorphisms. However, no previous study has succeeded in explaining these trends. The present study investigates the main factors that control the metamorphic trends along collision belts, with reference to the Dabie–Hongseong collision belt between the North and South China blocks and the Himalayan collision belt between the Indian and Asian blocks. In the Dabie–Hongseong collision belt, collision began in the east before 245 Ma and propagated westward until ca. 220 Ma. In the eastern part of the belt, the amount of oceanic slab that subducted before collision was insufficient to pull down the continental crust to the depths of ultrahigh-pressure metamorphism; however, ultrahigh-pressure metamorphism occurred in the western part of the belt. Slab break-off also migrated from east to west, with a westward increase in the depth of break-off (from ca. 10 kbar in the west to ca. 35 kbar in the east). These lateral trends along the belt resulted in a westward change from ultrahigh-temperature (915–1160 °C, 9.0–10.6 kbar) to high-pressure (835–860 °C, 17.0–20.9 kbar) and finally ultrahigh-pressure metamorphism (680–880 °C, 30–40 kbar). In the Himalayan collision belt, collision started from the west at 50 Ma and propagated eastward. The amount of oceanic slab subducted prior to collision was sufficient to pull down the continental crust to the depths of ultrahigh-pressure metamorphism in the west, but not in the east. Slab break-off started in the west at ca. 46 Ma and propagated eastward, with an eastward decrease in the depth of slab break-off from 27–29 to 17–18 kbar. Consequently, the metamorphic trend along the belt changes eastward from ultrahigh-pressure (690–750 °C, 27–29 kbar) to high-pressure and finally high-pressure granulite facies metamorphism (890 °C, 17–18 kbar). The differences in metamorphic trend between the Dabie–Hongseong and Himalayan collision belts reflect the amount of oceanic crust subducted prior to collision and the depth and timing of slab break-off along each belt.  相似文献   

4.
On 21 March 2008, an Ms7.3 earthquake occurred at Yutian County, Xinjiang Uygur Autonomous Region, which is in the same year as 2008 Mw 7.9 Wenchuan earthquake. These two earthquakes both took place in the Bayar Har block, while Yutian earthquake is located in the west edge and Wenchuan earthquake is in the east. The research on source characteristics of Yutian earthquake can serve to better understand Wenchuan earthquake mechanism. We attempt to reveal the features of the causative fault of Yutian shock and its co-seismic deformation field by a sensitivity-based iterative fitting (SBIF) method. Our work is based on analysis and interpretation to high-resolution satellite (Quickbird) images as well as D-InSAR data from the satellite Envisat ASAR, in conjunction with the analysis of seismicity, focal mechanism solutions and active tectonics in this region. The result shows that the 22 km long, nearly NS trending surface rupture zone by this event lies on a range-front alluvial platform in the Qira County. It is characterized by distinct linear traces and a simple structure with 1–3 m-wide individual seams and maximum 6.5 m width of a collapse fracture. Along the rupture zone are seen many secondary fractures and fault-bounded blocks by collapse, exhibiting remarkable extension. The co-seismic deformation affected a big range 100 km × 40 km. D-InSAR analysis indicates that the interferometric deformation field is dominated by extensional faulting with a small strike-slip component. Along the causative fault, the western wall fell down and the eastern wall, that is the active unit, rose up, both with westerly vergence. The maximum subsidence displacement is ～2.6 m in the LOS, and the maximum uplift is 1.2 m. The maximum relative vertical dislocation reaches 4.1 m, which is 10 km distant from the starting rupture point to south. The 42 km-long seismogenic fault in the subsurface extends in NS direction as an arc, and it dipping angle changes from 70° near the surface to 52° at depth ～10 km. The slip on the fault plane is concentrated in the depth range 0–8 km, forming a belt of length 30 km along strike on the fault plane. There are three areas of concentrating slip, in which the largest slip is 10.5 m located at the area 10 km distant from the initial point of the rupture.  相似文献   

5.
The Indian subcontinent comprises accreted cratonic fragments that underwent subsequent rifting–subduction–collision processes along major mobile belts. It is also a storehouse of a prolonged history of crustal evolution involving repeated episodes of magmatism, volcanism, sedimentation, and metamorphism, and the formation of intracratonic and foreland basins. The geologic–geomorphic evolution of the Peninsula is recorded in relic faults/suture zones that confine Paleozoic, Mesozoic, and Cenozoic sedimentary basins and landforms. In addition, escarpments, plateaus, waterfalls, deltas, planation surfaces, and strandlines are either aligned parallel and/or formed over them. Asymmetric relief across the western–eastern parts of the Peninsula, orographic effect on the precipitation pattern and climatic zones provide important constrains on the geologic and geomorphic evolution of the region. Though extensive continental and coastal deposition occurred during Permo-Triassic and Early Cretaceous, only the downwarped grabens of Gondwana basins preserved the sedimentary records. Occurrences of extensive Cenozoic deposits offshore and Neogene–Holocene deltaic deposits along the entire east coast as opposed to the absence of comparable deltaic sequences in the west coast are linked to intense and recurrent episodes of denudation indicating first-order control of basement structures over landscape evolution.Inheritance and continuum of basement structures over climate, and landscape evolution of Peninsular India can also be witnessed by the unique and diverse drainage patterns of major rivers. While most of the major rivers follow a general easterly direction, the landscape morphology of their catchments indicates youthful character and tectonically active nature. The east flowing rivers show an asymmetry between the areal extents of drainage basin size and delta, whereas the west-flowing rivers are short and straight and their catchments are miniscule in comparison with the rivers flowing toward east. The Western Ghats Escarpment forms an orographic barrier and acts as the main divide between these two drainage systems. There is a disparity between the quanta of sediment discharge as well. In addition, the eastern and western parts of India, across the Western Ghats Escarpment, show significant differences in terms of climatic zones (humid to per-humid on the west while it is arid to subhumid on the east). The west coast is characterized by > 3000 mm/year annual rainfall, that often reaches > 5000 mm/year, dominance of SW monsoon winds, occurrence of narrow (< 60 km), rocky, crenulated and coastal cliffs and pocket beaches, and net southerly long shore sediment transport. In contrast, the east coast is characterized by several hundred kilometers wide deltaic low lands built by major rivers. These rivers show trellis to dendritic stream patterns and follow major basement faults that are associated with geologic–historic–recent seismic activity. The sedimentary basins and delta heads, strandlines, and active delta lobes whose western boundary is always limited by basement faults have shown activity since the formation of the Gondwanan supercontinent. The eastern coastal region is also different from the west in terms of active NE monsoon, long shore sediment transport (toward north), and the formation of extensive lagoon-beach barrier systems since Neogene that in turn continue to occur until recent.Here we propose a conceptual tectono-geomorphic model demonstrating the inheritance and continuum of Gondwanan structural trends on the transient landscape of Peninsular India.  相似文献   

6.
The Indochina–Simao and Yangtze blocks were separated by a branch of the Paleo-Tethys Ocean, commonly referred as the Ailaoshan Ocean in the Paleozoic. Remnants of this Ailaoshan Ocean have been variably suggested to locate along (from east to west) the Ailaoshan fault, Jiujia–Anding fault and Amojiang–Lixianjiang fault. In order to test these models, we have carried out comprehensive detrital zircon U–Pb dating and Hf isotope analyses on the Cambrian to Devonian sedimentary units in the Ailaoshan Belt and its adjacent western margin of the Yangtze Block. Our results indicate marked detrital zircon provenance variation on different sides of the Ailaoshan–Tengtiaohe fault: detrital zircons from east of the fault display a diagnostic age peak at 730–900 Ma, which is characterized by both positive and negative εHf(t) values with a Hf model age (TDMC) peak at ~ 1.8 Ga, whereas detrital zircons from west of the fault display two major age populations of 400–500 and 900–1000 Ma, both characterized by mainly negative εHf(t) values with a Hf model age (TDMC) peak at ~ 2.1 Ga. Our new data indicate that detritus from east and west of the Ailaoshan–Tengtiaohe fault may have been mainly derived from, respectively, the Yangtze Block and Indochina–Simao blocks, thus suggesting the fault may represent the actual suture between the two blocks. Our study also reveals that the Ailaoshan Ocean may have started its early continental rift in the Early Silurian.  相似文献   

7.
《Gondwana Research》2013,23(3-4):1060-1067
Convergence between the Indian plate and the Eurasian plate has resulted in the uplift of the Tibetan Plateau, and understanding the associated dynamical processes requires investigation of the structures of the crust and the lithosphere of the Tibetan Plateau. Yunnan is located in the southwest edge of the plateau and adjacent to Myanmar to the west. Previous observations have confirmed that there is a sharp transition in mantle anisotropy in this area, as well as clockwise rotations of the surface velocity, surface strain, and fault orientation. We use S receiver functions from 54 permanent broad-band stations to investigate the structures of the crust and the lithosphere beneath Yunnan. The depth of the Moho is found to range from 36 to 40 km beneath southern Yunnan and from 55 to 60 km beneath northwestern Yunnan, with a dramatic variation across latitude 25–26°N. The depth of the lithosphere–asthenosphere boundary (LAB) ranges from 180 km to less than 70 km, also varying abruptly across latitude 25–26°N, which is consistent with the sudden change of the fast S-wave direction (from NW–SE to E–W across 26–28°N). In the north of the transition belt, the lithosphere is driven by asthenospheric flow from Tibet, and the crust and the upper mantle are mechanically coupled and moving southward. Because the northeastward movement of the crust in the Burma micro-plate is absorbed by the right-lateral Sagaing Fault, the crust in Yunnan keeps the original southward movement. However, in the south of the transition belt, the northeastward mantle flow from Myanmar and the southward mantle flow from Tibet interact and evolve into an eastward flow (by momentum conservation) as shown by the structure of the LAB. This resulting mantle flow has a direction different from that of the crustal movement. It is concluded that the Sagaing Fault causes the west boundary condition of the crust to be different from that of the lithospheric mantle, thus leading to crust–mantle decoupling in Yunnan.  相似文献   

8.
Qiongdongnan Basin is a Cenozoic rift basin located on the northern passive continental margin of the South China Sea. Due to a lack of geologic observations, its evolution was not clear in the past. However, recently acquired 2-D seismic reflection data provide an opportunity to investigate its tectonic evolution. It shows that the Qiongdongnan Basin comprises a main rift zone which is 50–100 km wide and more than 400 km long. The main rift zone is arcuate in map view and its orientation changes from ENE–WSW in the west to nearly E–W in the east. It can be divided into three major segments. The generally linear fault trace shown by many border faults in map view implies that the eastern and middle segments were controlled by faults reactivated from NE to ENE trending and nearly E–W trending pre-existing fabrics, respectively. The western segment was controlled by a left-lateral strike-slip fault. The fault patterns shown by the central and eastern segments indicate that the extension direction for the opening of the rift basin was dominantly NW–SE. A semi-quantitative analysis of the fault cut-offs identifies three stages of rifting evolution: (1) 40.4–33.9 Ma, sparsely distributed NE-trending faults formed mainly in the western and the central part of the study area; (2) 33.9–28.4 Ma, the main rift zone formed and the area influenced by faulting was extended into the eastern part of the study area and (3) 28.4–20.4 Ma, the subsidence area was further enlarged but mainly extended into the flanking area of the main rift zone. In addition, Estimates of extensional strain along NW–SE-trending seismic profiles, which cross the main rift zone, vary between 15 and 39 km, which are generally comparable to the sinistral displacement on the Red River Fault Zone offshore, implying that this fault zone, in terms of sinistral motion, terminated at a location near the southern end of the Yinggehai Basin. Finally, these observations let us to favour a hybrid model for the opening of the South China Sea and probably the Qiongdongnan Basin.  相似文献   

9.
The distribution of hominin fossil sites in the Turkana Basin, Kenya is intimately linked to the history of the Omo River, which affected the paleogeography and ecology of the basin since the dawn of the Pliocene. We report new geological data concerning the outlet channel of the Omo River between earliest Pliocene and final closure of the Turkana Basin drainage system in the latest Pliocene to earliest Quaternary. Throughout most of the Pliocene the Omo River entered the Turkana Basin from its source in the highlands of Ethiopia and exited the eastern margin of the basin to discharge into the Lamu embayment along the coast of the Indian Ocean. During the earliest Pliocene the river’s outlet was located in the northern part of the basin, where a remnant outlet channel is preserved in basalts that pre-date eruption of the Gombe flood basalt between 4.05 and 3.95 Ma. The outlet channel was faulted down to the west prior to 4.05 Ma, forming a natural dam behind which Lake Lonyumun developed. Lake Lonyumun was drained between 3.95 and 3.9 Ma when a new outlet channel formed north of Loiyangalani in the southeastern margin of the Turkana Basin. That outlet was blocked by Lenderit Basalt lava flows between 2.2 and 2.0 Ma. Faulting that initiated either during or shortly after eruption of the Lenderit Basalt closed the depression that is occupied by modern Lake Turkana to sediment and water.Several large shield volcanoes formed east of the Turkana Basin beginning by 2.5–3.0 Ma, volcanism overlapping in time, but probably migrating eastward from Mount Kulal on the eastern edge of the basin to Mount Marsabit located at the eastern edge of the Chalbi Desert. The mass of the volcanic rocks loaded and depressed the lithosphere, enhancing subsidence in a shallow southeast trending depression that overlay the Cretaceous and Paleogene (?) Anza Rift. Subsidence in this flexural depression guided the course of the Omo River towards the Indian Ocean, and also localized accumulations of lava along the margins of the shield volcanoes. Lava flows at Mount Marsabit extended across the Omo River Valley after 1.8–2.0 Ma based on estimated ages of fossils in lacustrine and terrestrial deposits, and possibly by as early as 2.5 ± 0.3 Ma based on dating of a lava flow. During the enhanced precipitation in latest Pleistocene and earliest Holocene (11–9.5 ka) this flexural depression became the site of Lake Chalbi, which was separated from Lake Turkana by a tectonically controlled drainage divide.  相似文献   

10.
The 1200 km-long North Anatolian Transform Fault connects the East Anatolian post-collisional compressional regime in the east with the Aegean back-arc extensional regime to the west. This active dextral fault system lies within a shear zone reaching up to 100 km in width, and consists of southward splining branches. These branches, which have less frequent and smaller magnitude earthquake activity compare to the major transform, cut and divide the shear zone into fault delimited blocks. Comparison of palaeomagnetic data from 46 sites in the Eocene volcanics from different blocks indicate that each fault-bounded block has been affected by vertical block rotations. Although clockwise rotations are dominant as expected from dextral fault-bounded blocks, anticlockwise rotations have also been documented. These anticlockwise rotations are interpreted as due to anticlockwise rotation of the Anatolian Block, as indicated by GPS measurements, and the effects of unmapped faults or pre-North Anatolian Fault tectonic events.  相似文献   

11.
New zircon U–Pb data, along with the data reported in the literature, reveal five phases of magmatic activity in the Tengchong Terrane since the Early Paleozoic with spatial and temporal variations summarized as Cambrian–Ordovician (500–460 Ma) to the east, minor Triassic (245–206 Ma) in the east and west, abundant Early Cretaceous (131–114 Ma) in the east, extensive Late Cretaceous (77–65 Ma) in the central region, and Paleocene–Eocene (65–49 Ma) in the central and western Tengchong Terrane, in which the Cretaceous–Eocene magmatism migrated from east to west. The increased zircon εHf(t) of the Early Cretaceous granitoids from − 12.3 to − 1.4 at ca. 131–122 Ma to − 4.6 to + 7.1 at ca. 122–114 Ma, identified for the first time in this study, and the magmatic flare-up at ca. 53 Ma in the central and western Tengchong Terrane indicate increased contributions from mantle- or juvenile crust-derived components. The spatial and temporal variations and changing magmatic compositions over time in the Tengchong Terrane closely resemble those of the Lhasa Terrane in southern Tibet. Such similarities, together with the data of stratigraphy and paleobiogeography, enable us to propose that the Tengchong Terrane in SW Yunnan is most likely linked with the Lhasa Terrane in southern Tibet, both of which experienced similar tectonomagmatic histories since the Early Paleozoic.  相似文献   

12.
《Comptes Rendus Geoscience》2015,347(4):161-169
The Dead Sea Fault is a major strike-slip fault bounding the Arabia plate and the Sinai subplate. On the basis of three GPS campaign measurements, 12 years apart, at 19 sites distributed in Israel and Jordan, complemented by Israeli permanent stations, we compute the present-day deformation across the Wadi Arava fault, the southern segment of the Dead Sea Fault. Elastic locked-fault modelling of fault-parallel velocities provides a slip rate of 4.7 ± 0.7 mm/yr and a locking depth of 11.6 ± 5.3 km in its central part. Along its northern part, south of the Dead Sea, the simple model proposed for the central profile does not fit the velocity field well. To fit the data, two faults have to be taken into account, on both sides of the sedimentary basin of the Dead Sea, each fault accommodating ∼ 2 mm/yr. Locking depths are small (less than 2 km on the western branch, ∼ 6 km on the eastern branch). Along the southern profile, we are once again unable to fit the data using the simple model, similar to the central profile. It is very difficult to propose a velocity greater than 4 mm/yr, i.e. smaller than that along the central profile. This leads us to propose that a part of the relative movement from Sinai to Arabia is accommodated along faults located west of our profiles.  相似文献   

13.
Eastern Gondwana was subjected to subduction processes during the Middle-Late Jurassic, but how these processes affected intraplate deformation in eastern Australia is poorly understood. Here we present 40Ar/39Ar, K-Ar, and Rb-Sr geochronological data from illitic clay-bearing fault gouges associated with the northern part of the 200 km long, N-striking, dextral strike-slip, Demon Fault in eastern Australia. We show a major range of geochronological ages at 162.99 ± 0.74–152.1 ± 4.8 Ma, indicating that the Demon Fault was active during the Late Jurassic. This period partially coincides with the Middle-Late Jurassic deposition of widespread ash-fall tuffs in the Clarence-Moreton, Surat, and Eromanga basins. We propose that Middle-Late Jurassic intraplate tectonism in eastern Australia was influenced by subduction processes farther east, which produced extensive calc-alkaline magmatism in New Zealand from ~170 Ma. A global plate reorganisation event, related to the development of Early-Middle Jurassic sea-floor spreading of the Pacific Plate, possibly acted as the driving mechanism responsible for the intensification of magmatism and intraplate faulting in eastern Gondwana.  相似文献   

14.
Mineral exploration of prospective areas concealed by extensive post-mineralization cover is growing, being very complex and expensive. The projection of rich and giant Paleocene to early Oligocene porphyry-Cu-Mo belts in northernmost Chilean Andes (17.5–19.5°S) has major exploration potential, but only a few minor deposits have been reported to date, due to the fact that the area is largely covered by post-mineral strata. We integrate the Cenozoic stratigraphic, structural and metallogenic evolution of this sector, in order to identify the most promising regions related to lesser post-mineral cover and the projection of different metallogenic belts. The Paleocene to early Eocene metallogenic belt extends along the Precordillera, with ca. 30 km wide, and includes porphyry-Cu prospects and small Cu (±Mo-Au-Ag) vein and breccia-pipe deposits. Geochronological data indicate an age of 55.5 Ma for an intrusion related to one deposit and ages from 69.5 to 54.5 Ma for hydrothermal alteration in one porphyry-Cu prospect and largest known Cu deposits. The middle Eocene to early Oligocene porphyry belt, in the Western Cordillera farther east, is associated with 46–44 Ma intrusions. It is estimated to be 40-km wide, but is largely concealed by thick post-mineral cover. The youngest Miocene to early Pliocene metallogenic belt, also in the Western Cordillera, is well-exposed and includes Au-Ag epithermal and polymetallic veins and manto-type deposits.The Oligocene-Holocene cover consists of a succession of continental sedimentary and volcanic rocks that overall increase in thickness from 0 to 5000 m, from west to east. These strata are subhorizontal in the west and folded-faulted towards the east. Miocene gentle anticlines and monocline flexures extend along strike for 30–60 km in the Precordillera and were generated by propagation of high-angle east-dipping blind reverse faults with at least 300–900 m of Oligocene bedrock offset. The thickness of cover exceeds 2000 m in the eastern Central Depression, whereas it is generally less than 1000 m in the Precordillera along the Paleocene to early Eocene porphyry-Cu belt and it can reach locally up to 5000 m in the Western Cordillera, above the middle Eocene to early Oligocene belt.In the studied Andean segment, the Miocene to early Pliocene metallogenic belt is superimposed on the Paleocene to Oligocene belts in a 40–50 km wide zone. This overlap may be explained by an accentuated migration of the magmatic front, from east to west, since ca. 25 Ma, as a consequence of subduction slab steepening after a period of magmatic lull and flat subduction from ca. 30–35 to 25 Ma. The identified areas of lesser cover thickness are prone to exploration for concealed deposits, especially along the projection of major porphyry-Cu-Mo belts.  相似文献   

15.
The Dashuang complex in Zhejiang Province of southeast China is composed of two distinct lithologies: syenite in the west and quartz monzonite in the east. They record similar zircon U–Pb ages of 224 ± 3 Ma (syenite), and 226 ± 2 Ma and 227 ± 1 Ma (quartz monzonite), respectively, but are notably different in petrography, magnetic susceptibility, whole-rock chemistry, zircon Hf isotope and zircon trace element characteristics. The west Dashuang syenitic pluton (the west body) has high modal alkali feldspar, high zircon saturation temperatures, high whole-rock and zircon MREE/HREE ratios, low Fe–Mg–Ti contents, and is depleted in Ba, Sr and Eu. It also has low magnetic susceptibilities, belongs to the ilmenite-series, and is a peraluminous and ferroan granitoid. The east Dashuang quartz monzonitic pluton (the east body) has abundant K-feldspar megacrysts, with hornblende, titanite and biotite being the major ferromagnesian minerals. In contrast to the west body, the east body has lower zircon saturation temperatures, lower whole-rock and zircon MREE/HREE ratios, higher Fe–Mg–Ti contents, and shows no depletion in Ba, Sr or Eu. The east body has higher magnetite contents, high magnetic susceptibilities and belongs to the magnetite-series. It is a metaluminous and magnesian granitoid of arc-affinity. Zircon Hf isotopic data reveal that both bodies were derived from partial melting of Paleoproterozoic igneous protoliths in the lower crust, but the east body possibly incorporated subducted terrigenous sediments. Both bodies have higher melting temperatures and pressures than adjacent Cretaceous granitoids, reflecting their origin in a thickened, hotter lower crust. The most feasible model to explain their differences is variations in water content during crustal melting, resulting in different melting and crystallization behaviors. Such melting in a Triassic thickened crust with variable water involvement, followed by Cretaceous magmatism in an extensional setting, is consistent with the flat-slab subduction model proposed for South China. The model involves crustal thickening and partial melting, with mantle and lower crustal metasomatism during flat-slab propagation in the Triassic–Early Jurassic, and crustal thinning and extension from the mid-Jurassic to the Cretaceous.  相似文献   

16.
《Gondwana Research》2014,26(4):1690-1699
The continental collision between the Indian and Asian plates plays a key role in the geologic and tectonic evolution of the Tibetan plateau. In this article we present high-resolution tomographic images of the crust and upper mantle derived from a large number of high-quality seismic data from the ANTILOPE project in western Tibet. Both local and distant earthquakes were used in this study and 35,115 P-wave arrival times were manually picked from the original seismograms. Geological and geochemical results suggested that the subducting Indian plate has reached northward to the Lhasa terrane, whereas our new tomography shows that the Indian plate is currently sub-horizontal and underthrusting to the Jinsha river suture at depths of ~ 100 to ~ 250 km, suggesting that the subduction process has evolved over time. The Asian plate is also imaged clearly from the surface to a depth of ~ 100 km by our tomography, and it is located under the Tarim Basin north of the Altyn Tagh Fault. There is no obvious evidence to show that the Asian plate has subducted beneath western Tibet. The Indian and Asian plates are separated by a prominent low-velocity zone under northern Tibet. We attribute the low-velocity zone to mantle upwelling, which may account for the warm crust and upper mantle beneath that region, and thus explain the different features of magmatism between southern and northern Tibet. But the upwelling may not penetrate through the whole crust. We propose a revised geodynamic model and suggest that the high-velocity zones under Lhasa terrane may reflect a cold crust which has interrupted the crustal flow under the westernmost Tibetan plateau.  相似文献   

17.
Suture zones often archive complex geologic histories underscored by episodes of varying style of deformation associated with intercontinental collision. In the Lopukangri area of south-central Tibet (29°54′N, 84°24′E) field relationships between tectonic units juxtaposed by the India–Asia suture are well exposed, including Indian passive margin rocks (Tethyan Sedimentary Sequence), forearc deposits (Xigaze Group), magmatic arc rocks (Gangdese batholith and Linzizong Formation) and syncollision deposits (Eocene–Miocene conglomerates). To better understand the structural history of this area, we integrated geologic mapping with biotite 40Ar/39Ar thermochronology and zircon U–Pb geochronology. The first-order structure is a system of north-directed thrusts which are part of the Great Counter thrust (GCT) that places Indian passive margin rocks and forearc deposits on top of magmatic arc rocks and syn-tectonic conglomerates. We infer the south-directed Late Oligocene Gangdese Thrust (GT) exists at unexposed structural levels based on field mapping, cross sections, and regional correlations as it has been documented immediately to the east. A granite in the footwall has a U–Pb zircon age of 38.4 ± 0.4 Ma, interpreted to be the age of emplacement of the granite, and a younger 40Ar/39Ar biotite age of 19.7 ± 0.1 Ma. As the granite sample is situated immediately below a nonconformity with low grade greenschist facies rocks, we interpret the younger age to reflect Miocene resetting of the biotite Ar system. Syn-tectonic deposits in the Lopukangri area consist of three conglomerate units with a total thickness of ∼1.5 km. The lower two units consist of cobble gravel pebble conglomerates rich in volcanic and plutonic clasts, transitioning to conglomerates with only sedimentary clasts in the upper unit. We correlate the syncollision deposits to the Eocene–Oligocene Qiuwu Formation based on field relationships, stratigraphy and petrology. Petrology and clast composition suggest the lower two units of the Qiuwu Formation had a northern provenance (Lhasa block and magmatic arc) and the upper unit had a southern provenance (Tethyan Sedimentary Sequence). Our observations are consistent with paleocurrent data from other studies which suggest a predominant south-directed paleoflow for this formation. We propose a model in which: (1) granites intrude at 38.4 ± 0.4 Ma; (2) are exhumed by erosion; (3) and buried due to regional subsidence and initial deposition of a conglomerate unit; (4) exposed by the GT at ∼27–24 Ma to provide detritus; (5) buried a second time by hanging wall-derived sedimentary deposits and the GCT, then (6) exposed from a depth of ∼12–10 km by a blind thrust at ∼19 Ma. An alternate model describes: (1) intrusion of the granites at 38.4 ± 0.4 Ma, followed by (2) exhumation of the granites via normal faulting to provide detritus; (3) then burial by the GCT at ∼24 Ma, followed by (4) exhumation via regional erosional denudation at ∼19 Ma. Exposure of the GT west of Xigaze has not been confirmed. We suggest that shallower structural levels of the India-Asia suture zone are exposed to the west of the study area, compared to the east, where the GT has been previously documented. The GCT in the area is short-lived, as it is cut and offset by a Middle Miocene ∼N-striking W-dipping oblique normal fault system.  相似文献   

18.
《Gondwana Research》2013,24(4):1378-1401
The Qilian Orogen at the northern margin of the Tibetan Plateau is a type suture zone that recorded a complete history from continental breakup to ocean basin evolution, and to the ultimate continental collision in the time period from the Neoproterozoic to the Paleozoic. The Qilian Ocean, often interpreted as representing the “Proto-Tethyan Ocean”, may actually be an eastern branch of the worldwide “Iapetus Ocean” between the two continents of Baltica and Laurentia, opened at ≥ 710 Ma as a consequence of breakup of supercontinent Rodinia.Initiation of the subduction in the Qilian Ocean probably occurred at ~ 520 Ma with the development of an Andean-type active continental margin represented by infant arc magmatism of ~ 517–490 Ma. In the beginning of Ordovician (~ 490 Ma), part of the active margin was split from the continental Alashan block and the Andean-type active margin had thus evolved to western Pacific-type trench–arc–back-arc system represented by the MORB-like crust (i.e., SSZ-type ophiolite belt) formed in a back-arc basin setting in the time period of ~ 490–445 Ma. During this time, the subducting oceanic lithosphere underwent LT-HP metamorphism along a cold geotherm of ~ 6–7 °C/km.The Qilian Ocean was closed at the end of the Ordovician (~ 445 Ma). Continental blocks started to collide and the northern edge of the Qilian–Qaidam block was underthrust/dragged beneath the Alashan block by the downgoing oceanic lithosphere to depths of ~ 100–200 km at about 435–420 Ma. Intensive orogenic activities occurred in the late Silurian and early Devonian in response to the exhumation of the subducted crustal materials.Briefly, the Qilian Orogen is conceptually a type example of the workings of plate tectonics from continental breakup to the development and evolution of an ocean basin, to the initiation of oceanic subduction and formation of arc and back-arc system, and to the final continental collision/subduction and exhumation.  相似文献   

19.
《Gondwana Research》2008,13(4):380-387
We present the first precise age for Precambrian basement rocks in Bangladesh. These lie within the Dinajpur block, located between the Indian Craton to the southwest and the Shillong Massif to the east. There are no surface outcrops and the rocks were intersected by drill holes. They consist of a suite of tonalitic and granodioritic rocks, variously deformed to granitic gneiss and intruded by younger monzogranite. A tonalite obtained at a depth of 227.48 m in drill hole BH-2 at Maddhapara, in northwestern Bangladesh, records a SHRIMP zircon 207Pb/206Pb magmatic age of 1722 ± 6 Ma. Paleoproterozoic rocks with similar magmatic ages are unknown in the adjacent Indian blocks of the Chotanagpur Plateau (Indian Craton) or Shillong Massif. This lack of comparable ages may be due to the paucity of precise radiometric ages from the Indian terrains or, more likely, because there are real age differences, with the buried rocks at Maddhapara representing a separate and discrete microcontinental fragment (the Dinajpur block) that was trapped by the northward migration of India during Gondwana dispersal.  相似文献   

20.
New fission track and Ar/Ar geochronological data provide time constraints on the exhumation history of the Himalayan nappes in the Mandi (Beas valley) – Tso Morari transect of the NW Indian Himalaya. Results from this and previous studies suggest that the SW-directed North Himalayan nappes were emplaced by detachment from the underthrusted upper Indian crust by 55 Ma and metamorphosed by ca. 48–40 Ma. The nappe stack was subsequently exhumed to shallow upper crustal depths (<10 km) by 40–30 Ma in the Tso Morari dome (northern section of the transect) and by 30–20 Ma close to frontal thrusts in the Baralacha La region. From the Oligocene to the present, exhumation continued slowly.Metamorphism started in the High Himalayan nappe prior to the Late Oligocene.High temperatures and anatexis of the subducting upper Indian crust engendered the buoyancy-driven ductile detachment and extrusion of the High Himalayan nappe in the zone of continental collision. Late extrusion of the High Himalayan nappe started about 26 Ma ago, accompanied by ductile extensional shearing in the Zanskar shear zone in its roof between 22 and 19 Ma concomitant with thrusting along the basal Main Central Thrust to the south. The northern part of the nappe was then rapidly exhumed to shallow depth (<10 km) between 20 and 6 Ma, while its southern front reached this depth at 10–5 Ma.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号