首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Recognition of neotectonic features along the Marikina Valley fault system (MVFS) in central Luzon, Philippines indicates a dominantly dextral strike-slip motion during its most recent activity believed to be Late Pleistocene to Holocene in age. Variations in the ratios of vertical to horizontal displacements for the segments imply a dominantly dextral motion of the West Marikina Valley fault (WMVF) and oblique dextral motion for the East Marikina Valley fault (EMVF). The displacement data further suggest that rupturing along the EMVF involved multiple segments and occurred separately from the events along the WMVF segments. Estimated earthquake magnitudes for the WMVF and EMVF based on single-event offsets fall within the range M 7.3–7.7. The vertical slip component in the northern part of the Marikina Valley is associated with the development of a basin between the EMVF and WMVF while the large vertical component in the southernmost segment of the EMVF (Talim) is attributed to volcanism-related extension. Lateral advection of the block bounded by the MVFS and the Philippine fault zone (PFZ), rather than pure shear resulting from an assumed east–west compression, best explains the observed kinematics of the MVFS. This is the result of compression during the westward drift of the Philippine Sea Plate and northern Luzon and occurs through slip along the WMVF and EMVF at rates of 5–7 mm/yr.  相似文献   

2.
Large earthquakes in strike-slip regimes commonly rupture fault segments that are oblique to each other in both strike and dip. This was the case during the 1999 Izmit earthquake, which mainly ruptured E–W-striking right-lateral faults but also ruptured the N60°E-striking Karadere fault at the eastern end of the main rupture. It will also likely be so for any future large fault rupture in the adjacent Sea of Marmara. Our aim here is to characterize the effects of regional stress direction, stress triggering due to rupture, and mechanical slip interaction on the composite rupture process. We examine the failure tendency and slip mechanism on secondary faults that are oblique in strike and dip to a vertical strike-slip fault or “master” fault. For a regional stress field well-oriented for slip on a vertical right-lateral strike-slip fault, we determine that oblique normal faulting is most favored on dipping faults with two different strikes, both of which are oriented clockwise from the strike-slip fault. The orientation closer in strike to the master fault is predicted to slip with right-lateral oblique normal slip, the other one with left-lateral oblique normal slip. The most favored secondary fault orientations depend on the effective coefficient of friction on the faults and the ratio of the vertical stress to the maximum horizontal stress. If the regional stress instead causes left-lateral slip on the vertical master fault, the most favored secondary faults would be oriented counterclockwise from the master fault. For secondary faults striking ±30° oblique to the master fault, right-lateral slip on the master fault brings both these secondary fault orientations closer to the Coulomb condition for shear failure with oblique right-lateral slip. For a secondary fault striking 30° counterclockwise, the predicted stress change and the component of reverse slip both increase for shallower-angle dips of the secondary fault. For a secondary fault striking 30° clockwise, the predicted stress change decreases but the predicted component of normal slip increases for shallower-angle dips of the secondary fault. When both the vertical master fault and the dipping secondary fault are allowed to slip, mechanical interaction produces sharp gradients or discontinuities in slip across their intersection lines. This can effectively constrain rupture to limited portions of larger faults, depending on the locations of fault intersections. Across the fault intersection line, predicted rakes can vary by >40° and the sense of lateral slip can reverse. Application of these results provides a potential explanation for why only a limited portion of the Karadere fault ruptured during the Izmit earthquake. Our results also suggest that the geometries of fault intersection within the Sea of Marmara favor composite rupture of multiple oblique fault segments.  相似文献   

3.
Derek Rust   《Tectonophysics》2005,408(1-4):193
Transpressional tectonics are typically associated with restraining bends on major active strike-slip faults, resulting in uplift and steep terrain. This produces dynamic erosional and depositional conditions and difficulties for established lines of palaeoseismological investigation. Consequently, in these areas data are lacking to determine tectonic behaviour and future hazard potential along these important fault segments. The Big Bend of the San Andreas fault in the Transverse Ranges of southern California exemplifies these problems. However, landslides, probably seismically triggered, are widespread in the rugged terrain of the Big Bend. Fluvial reworking of these deposits rapidly produces geomorphic planes and lines that are markers for subsequent fault slip. The most useful are offset and abandoned stream channels, for these are relatively high precision markers for identifying individual faulting events. Palaeoseismological studies from the central Big Bend, involving 14C ages of charcoal fragments from trench exposures, illustrate these points and indicate that the past three faulting events, including the great 1857 earthquake, were relatively similar in scale, each producing offsets of about 7–7.5 m. The mean recurrence interval is 140–220 years. The pre-1857 event here may be the 1812 event documented south of the Big Bend or an event which took place probably between 1630 and 1690. Ground breakage in both events extended south of the Big Bend, unlike the 1857 event where rupture was skewed to the north. The preceding faulting event ruptured both to the north and south of the Big Bend and probably occurred between 1465 and 1495. All these events centred on the Big Bend and may be typical for this fault segment, suggesting that models of uniform long-term slip rates may not be applicable to the south-central San Andreas. A slip-rate estimate of 34–51 mm a− 1 for the central Big Bend, although uncertain, may also imply higher slip in the Big Bend and highlights difficulties in correlating slip-rates between sites with different tectonic settings. Slip rates on the San Andreas may increase within the broad compressional tectonics zone of the Big Bend, compared to the north and south where the plate boundary is a relatively linear and sub-parallel series of dominantly strike-slip faults. Partitioning slip within the Big Bend is inherently uncertain and insufficient suitably comparable data are available to sustain a uniform slip model, although such models are a common working assumption.  相似文献   

4.
We conducted a seismic tomographic analysis to estimate the crustal structure beneath the Shikoku and Chugoku regions in Japan. The Philippine Sea slab (PHS slab) subducts continuously in a SE–NW direction beneath this region, and the crustal structure is complex. Furthermore, the Median Tectonic Line (MTL), one of the longest and most active arc-parallel fault systems in Japan (hereafter, the MTL active fault system), is located in this area, and the right-lateral strike–slip movement of this fault system is related to the oblique subduction of the PHS slab. The MTL active fault system has ruptured repeatedly during the last 10 000 years, and has high seismic potential. Our tomographic analysis clarified the heterogeneous crustal structure along the MTL active fault system. This fault system in Shikoku can be divided into two segments, an east segment and a west segment, on the basis of the velocity structure. This segmentation model is consistent with other such models that have been determined from geological and geomorphological data such as fault geometry, slip rate, and faulting history. This consistency suggests that the surface characteristics of the MTL active fault system are related to structural properties of the crust. In particular, a prominent low-velocity (low-V) zone is present in the lower crust beneath the east segment. Our tomographic images show that the lower crust structure beneath the east segment is obviously different from that of the other segment. Furthermore, this low-V zone may indicate the presence of fluid, possibly related to dehydration of the PHS slab. As the presence of fluid in the lower crust affects the activity of the fault, stress accumulation and the fault failure mechanism may differ between the two segments of the MTL active fault system.  相似文献   

5.
Field observations and interpretations of satellite images reveal that the westernmost segment of the Altyn Tagh Fault (called Karakax Fault Zone) striking WNW located in the northwestern margin of the Tibetan Plateau has distinctive geomorphic and tectonic features indicative of right-lateral strike-slip fault in the Late Quaternary. South-flowing gullies and N–S-trending ridges are systematically deflected and offset by up to ~ 1250 m, and Late Pleistocene–Holocene alluvial fans and small gullies that incise south-sloping fans record dextral offset up to ~ 150 m along the fault zone. Fault scarps developed on alluvial fans vary in height from 1 to 24 m. Riedel composite fabrics of foliated cataclastic rocks including cataclasite and fault gouge developed in the shear zone indicate a principal right-lateral shear sense with a thrust component. Based on offset Late Quaternary alluvial fans, 14C ages and composite fabrics of cataclastic fault rocks, it is inferred that the average right-lateral strike-slip rate along the Karakax Fault Zone is ~ 9 mm/a in the Late Quaternary, with a vertical component of ~ 2 mm/a, and that a M 7.5 morphogenic earthquake occurred along this fault in 1902. We suggest that right-lateral slip in the Late Quaternary along the WNW-trending Karakax Fault Zone is caused by escape tectonics that accommodate north–south shortening of the western Tibetan Plateau due to ongoing northward penetration of the Indian plate into the Eurasian plate.  相似文献   

6.
The effect of open and filled slip surfaces on the upscaled permeability of two fault zones with 6 and 14 m strike-slip in an eolian Aztec Sandstone, Nevada, USA is evaluated. Each fault zone is composed of several fault components: a fault core, bounded by filled through-going slip surfaces referred to as slip bands, and a surrounding damage zone that contains joints and deformation bands. Slip band geometry, composition, and petrophysical properties are characterized. Measurements and modeling show that slip band permeabilities can vary over 12 orders of magnitude depending on the degree of fill within the slip bands. The slip bands along with other fault zone components are represented in finite volume numerical calculations and the impact of various slip-band representations on upscaled fault zone permeability is tested. The results show 2 orders of magnitude variation in upscaled fault zone permeability in the fault-normal direction and a factor of 2 variation in the fault-parallel direction. The numerical results presented here are compared to the earlier numerical results in which structured Cartesian grids were used for the numerical simulations, and are in qualitative agreement with earlier calculations but use about a factor of 250–400 fewer numerical cells.  相似文献   

7.
Active faulting and seismic properties are re-investigated in the eastern precinct of the city of Thessaloniki (Northern Greece), which was seriously affected by two large earthquakes during the 20th century and severe damage was done by the 1759 event. It is suggested that the earthquake fault associated with the occurrence of the latest destructive 1978 Thessaloniki earthquake continues westwards to the 20-km-long Thessaloniki–Gerakarou Fault Zone (TGFZ), which extends from the Gerakarou village to the city of Thessaloniki. This fault zone exhibits a constant dip to the N and is characterised by a complicated geometry comprised of inherited 100°-trending faults that form multi-level branching (tree-like fault geometry) along with NNE- to NE-trending faults. The TGFZ is compatible with the contemporary regional N–S extensional stress field that tends to modify the pre-existing NW–SE tectonic fabric prevailing in the mountainous region of Thessaloniki. Both the 1978 earthquake fault and TGFZ belong to a ca. 65-km-long E–W-trending rupture fault system that runs through the southern part of the Mygdonia graben from the Strymonikos gulf to Thessaloniki. This fault system, here called Thessaloniki–Rentina Fault System (TRFS), consists of two 17–20-km-long left-stepping 100°-trending main fault strands that form underlapping steps bridged by 8–10-km-long ENE–WSW faults. The occurrence of large (M6.0) historical earthquakes (in 620, 677 and 700 A.D.) demonstrates repeated activation, and therefore the possible reactivation of the westernmost segment, the TGFZ, could be a major threat to the city of Thessaloniki. Changes in the Coulomb failure function (ΔCFF) due to the occurrence of the 1978 earthquake calculated out in this paper indicate that the TGFZ has been brought closer to failure, a convincing argument for future seismic hazard along the TGFZ.  相似文献   

8.
The 3-D seismic tomographic data are used together with field, core and well log structural information to determine the detailed 3-D architecture of fault zones in a granitic massif of volume 500×575×168 m at Mina Ratones area in the Albalá Granitic Pluton. To facilitate the integration of the different data, geostatistical simulation algorithms are applied to interpolate the relatively sparse structural (hard) control data conditioned to abundant but indirect 3-D (soft) seismic tomographic data. To effectively integrate geologic and tomographic data, 3-D migration of the velocity model from the time domain into the depth domain was essential. The resulting 3-D model constitutes an image of the fault zone architecture within the granitic massif that honours hard and soft data and provides an evaluation of the spatial variability of structural heterogeneities based on the computation of 3-D experimental variograms of Fracture Index (fault intensity) data. This probabilistic quantitative 3-D model of spatially heterogeneous fault zones is suitable for subsequent fluid flow simulations. The modeled image of the 3-D fault distribution is consistent with the fault architecture in the Mina Ratones area, which basically consists of two families of subvertical structures with NNE–SSW and ENE–WSW trends that displaces the surfaces of low-angle faults (North Fault) and follows their seismically detected staircase geometry. These brittle structures cut two subvertical dykes (27 and 27′ Dykes) with a NNE–SSW to N–S trend. The faults present high FI (FI>12) adjacent bands of irregular geometry in detail that intersect in space delimiting rhombohedral blocks of relatively less fractured granite (FI<6). Both structural domains likely correspond with the protolith and the damaged zone/fault core in the widely accepted model for fault zone architecture. Therefore, the construction of 3-D grids of the FI in granitic areas affected by brittle tectonics permits the quantitative structural characterization of the rock massif.  相似文献   

9.
The 14 November 2001 Kunlun, China, earthquake with a moment magnitude (Mw) 7.8 occurred along the Kusai Lake–Kunlun Pass fault of the Kunlun fault system. We document the spatial distribution and geometry of surface rupture zone produced by this earthquake, based on high-resolution satellite (Landsat ETM, ASTER, SPOT and IKONOS) images combined with field measurements. Our results show that the surface rupture zone can be divided into five segments according to the geometry of surface rupture, including the Sun Lake, Buka Daban–Hongshui River, Kusai Lake, Hubei Peak and Kunlun Pass segments from west to east. These segments, each 55 to 130 km long, are separated by step-overs. The Sun Lake segment extends about 65 km with a strike of N45° 75°W (between 90°05′E 90°50′E) along the previously unrecognized West Sun Lake fault. A gap of about 30 km long exists between the Sun Lake and Buka Daban Peak where no obvious surface ruptures can be observed either from the satellite images or field observations. The Buka Daban–Hongshui River, Kusai Lake, Hubei Peak and Kunlun Pass segments run about 365 km striking N75° 85°W along the southern slope of the Kunlun Mountains (between 91°07′E 94°58′E). This segmentation of the surface rupture is well correlated with the pattern of slip distribution measured in the field. Detailed mapping suggest that these five first-order segments can be further separated into over 20 second-order segments with a length of 10–30 km, linked by smaller scale step-overs or bends.Our result also shows that the total coseismic surface rupture length produced by the 2001 Kunlun earthquake is about 430 km (excluding the 30-km-long gap), which is the longest coseismic surface rupture for an intracontinental earthquake ever recorded.Finally, we suggest a multiple bilateral rupture propagation model that shows the rupture process of the 2001 Mw 7.8 earthquake is complex. It consists of westward and eastward rupture propagations and interaction of these bilateral rupture processes.  相似文献   

10.
Metamorphic core complexes are usually thought to be associated with regional crustal extension and crustal thinning, where deep crustal material is exhumed along gently dipping normal shear zones oblique to the regional extension direction. We present a new mechanism whereby metamorphic core complexes can be exhumed along crustal‐scale strike‐slip fault systems that accommodated crustal shortening. The Qazaz metamorphic dome in Saudi Arabia was exhumed along a gently dipping jog in a crustal‐scale vertical strike‐slip fault zone that caused more than 25 km of exhumation of lower crustal rocks by 30 km of lateral motion. Subsequently, the complex was transected by a branch of the strike‐slip fault zone, and the segments were separated by another 30 km of lateral motion. Strike‐slip core complexes like the Qazaz Dome may be common and may have an important local effect on crustal strength.  相似文献   

11.
The Mondy strike-slip fault connects the W-E Tunka and N-S Hovsgol basins on the southern flank of the Baikal rift system. Ground penetrating radar (GPR) surveys in its damage zone provide constraints on thicknesses, dips, and plunges of fault planes, as well as on the amount and sense of vertical slip. Strike-slip faulting in the southern segment of the Mondy fault within the territory of Russia bears a normal slip component of motion along the W-E and NW planes. These motions have produced negative flower structures in shallow crust appearing as grabens upon Pleistocene fluvioglacial terraces. The amount of normal slip estimated from the displacement of reflection events varies over the area and reaches its maximum of 3.4 m near Mondy Village. In the Kharadaban basin link, left-lateral strike slip displaces valleys of ephemeral streams to 22 m, while normal slip detected by GPR reaches 2.2 m; this normal-to-strike slip ratio corresponds to a direction of ~ 6° to the horizon. The angles of dips of faults are in the range 75°-79°; the thicknesses of fault planes marked by low- or high-frequency anomalies in GPR records vary from 2.5 to 17.0 m along strike and decrease with depth within a few meters below the surface, which is common to near-surface coseismic motions. Many ruptures fail to reach the surface but appear rather as sinkholes localized mainly in fault hanging walls. The deformation style in the damage zone of the Mondy fault bears impact of the NW Yaminshin fault lying between its two segments. According to photoelasticity, the stress field changes locally at the intersection of the two faults, under NE compression at 38°, till the inverse orientations of principal compression and extension stresses. This stress pattern leads to a combination of normal and left-lateral strike slip components.  相似文献   

12.
Distributed deformation around the eastern tip of the Kunlun fault   总被引：3，自引：0，他引：3  
Whether active strain within the Indo-Asian collision zone is primarily localized along major strike-slip fault systems or is distributed throughout the intervening crust between faults remains uncertain. Despite refined estimates of slip rates along many of the major fault zones, relatively little is known about how displacement along these structures is accommodated at fault terminations. Here, we show that a systematic decrease in left-lateral slip rates along the eastern ~200 km of the Kunlun fault, from >10 mm/year to <1 mm/year, is coincident with high topography in the Anyemaqen Shan and with a broad zone of distributed shear and clockwise vorticity within the Tibetan Plateau. Geomorphic analysis of river longitudinal profiles, coupled with inventories of cosmogenic radionuclides in fluvial sediment, reveal correlated variations in fluvial relief and erosion rate across the Anyemaqen Shan that reflect ongoing differential rock uplift across the range. Our results imply that the termination of the Kunlun fault system is accommodated by a combination of distributed crustal thickening and by clockwise rotation of the eastern fault segments.  相似文献   

13.
THREE-DIMENSIONAL DEFORMATION ALONG THE ALTYN TAGH FAULT ZONE AND UPLIFT OF THE ALTYN MOUNTAIN, NORTHERN TIBET  相似文献   

14.
The co-seismic deformations produced during the September 27, 2003 Chuya earthquake (Ms = 7.5) that affected the Gorny Altai, Russia, are described and discussed along a 30 km long segment. The co-seismic deformations have manifested themselves both in unconsolidated sediments as R- and R′-shears, extension fractures and contraction structures, and in bedrock as the reactivation of preexisting schistosity zones and individual fractures, as well as development of new ruptures and coarse crushing zones. It has been established that the pattern of earthquake ruptures represents a typical fault zone trending NW–SE with a width reaching 4–5 km and a dextral strike–slip kinematics. The initial stress field that produced the whole structural pattern of co-seismic deformations during the Chuya earthquake, is associated with a transcurrent regime with a NNW–SSE, almost N–S, trending of compressional stress axis (σ1), and a ENE–WSW, almost E–W, trending of tensional stress axis (σ3). The state of stress in the newly-formed fault zone is relatively uniform. The local stress variations are expressed in insignificant deviation of σ1 from N–S to NW–SE or NE–SW, in short-term fluctuations of relative stress values in keeping their spatial orientations, or in a local increase of the plunge angle of the σ1. The geometry of the fault zone associated with the Chuya earthquake has been compared with the mechanical model of fracturing in large continental fault zones with dextral strike–slip kinematics. It is apparent that the observed fracture pattern corresponds to the late disjunctive stage of faulting when the master fault is not fully developed but its segments are already clearly defined. It has been shown that fracturing in widely different rocks follows the common laws of the deformation of solid bodies, even close to the Earth surface, and with high rates of movements.  相似文献   

15.
阿尔金断裂带是青藏高原北部的一条大型左旋走滑断裂带,近EW向延伸2000多公里, 它构成了青藏高原与塔里木盆地之间的重要地质边界。康西瓦断裂位于阿尔金断裂带西段, 呈WNW-ESE向延伸约 700km。文章在高分辨率卫星遥感图像(印度遥感卫星5.8m分辨率)和数字高程地形模型(DEM)数据分析的基础上,并结合野外构造地貌考察观测,对康西瓦断裂的第四纪构造活动及其地貌特征进行了初步研究。沿断裂带发育的系统错断水系、错断冲积扇、挤压脊、走滑拉分盆地等典型构造地貌特征表明,该断裂晚第四纪经历了强烈的左旋走滑活动。同时,研究还揭示沿康西瓦断裂发育了一条长约80km的地表地震破裂带,最大同震左旋水平错位为4m,估算产生该地表破裂带的地震是一矩震级为Mw7.3的大地震。 另外,文章根据不同年代地表地貌特征的左旋错位距离,估算出康西瓦断裂晚第四纪以来的长期走滑速率为8~12mm/a,远低于早期估算的20~30mm/a,但是与阿尔金断裂带中、东段的地质估算结果9±2mm/a及GPS测量结果9±4mm/a接近。  相似文献   

16.
玉树断裂带左旋走滑活动标志及其几何学 与运动学特征   总被引：2，自引：1，他引：1  
玉树断裂带位于甘孜-玉树断裂带北西段,是一条总体呈NWW向展布的左旋走滑活动断裂带.沿断裂带发育错断水系与冲沟、拉分盆地、地震地表破裂与断裂破碎带等一系列反映玉树断裂带左旋走滑活动的典型地质-地貌标志.在室内遥感解译的基础上,结合最新的野外实地调查成果,对沿玉树断裂带上反映其左旋走滑活动的地质-地貌标志进行了总结,并对断裂带的几何学与运动学特征进行了综合分析.结果表明,玉树断裂带总长约150km,总体走向120～130°,自西向东可划分为呈左阶雁列分布的陇蒙达-结隆段、结隆-结古段和结古-查那扣段3段.沿该断裂带发育的串珠状拉分断陷盆地规模的大小反映出玉树断裂带自西向东拉张效应逐渐减弱、挤压效应逐渐增强的特点.玉树2010年7.1级地震的宏观震中处于晚第四纪活动性最为显著的中段,而仪器震中恰好处于该断裂带的不连续部位,进一步证明雁列走滑活动断裂带上的不连续部位通常是强震活动的初始破裂区域.  相似文献   

17.
Normal faults within orogenic belts can be pre-, syn- or post-orogenic features. We studied the Gubbio normal fault (central Italy), which is an example of a pre-orogenic fault reactivated in a post-orogenic stage. The Gubbio Fault is a 22-km-long fault bordering a Quaternary basin and part of an active faults system in the Umbria–Marche region (Central Italy). The interpretation of a set of seismic profiles enables us to reconstruct the fault geometry in detail and to measure displacement and throw distributions along the fault strike. Seismic data indicate that the Gubbio Fault represents an example of multiple reactivation: at least a portion of the fault was active in the Miocene and only a part of the total displacement was achieved in the Quaternary. The reconstruction of the fault geometry at depth shows that the fault is characterised by listric geometry. The fault is also characterised by a bend along strike and structure contours show that this geometry is maintained at depth. As the fault is commonly addressed as presently active, the maximum fault dimensions are correlated to the maximum expected earthquake, and the presence of the fault bend is discussed as a possible barrier to seismic ruptures propagation.  相似文献   

18.
The role of hydrothermal fluids in assisting the activity of strike-slip faults is investigated using a range of new geological, geophysical, and geochemical data obtained on the Argentat fault, Massif Central, France. This fault zone, 180-km-long and 6 to 8 km-width, has experienced coeval intense channeling of hydrothermal fluids and brittle deformation during a short time span (300–295 Ma). According to seismic data, the fault core is a 4-km-wide, vertical zone of high fracture density that rooted in the middle crust (~ 13 km) and that involved fluids in its deeper parts (9–13 km depth). If stress analyses in the fault core and strain analyses in the damage zone both support a left-lateral movement along the fault zone, it is inferred that hydrothermal fluids have strongly influenced fault development, and the resulting fault has influenced fluid flow. Fluid pressure made easier fracturing and faulting in zones of competent rocks units and along rheological boundaries. Repeated cycles of increase of fault-fracture permeability then overpressure of hydrothermal fluids at fault extremity favored strong and fast development of the crustal-scale strike-slip fault. The high permeability obtained along the fault zone permitted a decrease of coupling across the weak fault core. Connections between shallower and lower crustal fluids reservoirs precipitate the decrease of fault activity by quartz precipitation and sulfides deposition. The zones of intense hydrothermal alteration at shallows crustal levels and the zones of fluid overpressure at the base of the upper crust both controlled the final geometry of the crustal-scale fault zone.  相似文献   

19.
Franck A. Audemard   《Tectonophysics》2006,424(1-2):19-39
This paper discusses the surface rupture of the Cariaco July 09, 1997 Ms 6.8 earthquake in northeastern Venezuela – located at 10.545°N and 63.515°W and about 10 km deep. The field reconnaissance of the ground breaks confirms that this event took place on the ENE–WSW trending onshore portion of the dextral El Pilar fault (between the Gulfs of Cariaco and Paria), which is part of the major wrenching system within the Caribbean–South America plate boundary zone. Dextral slip along this fault was further supported by the structural style of this rupture (en echelon right-lateral R shears connected by mole tracks at restraining stepovers) and by larger geometric complexities (pop-ups at Las Manoas and Guarapiche), as well as by the focal mechanism solutions determined for the event by several authors. This 1997 surface ruptre comprised two distinct sections, from west to east: (a) a main very conspicuous, continuous, 30-km-long, rather straight, 075°N-trending alignment of en echelon surface breaks, with a rather constant, purely dextral coseismic slip of about 25  cm, but reaching a maximum value of 40 cm slightly northwest of Pantoño; and (b) a secondary discontinuous, 10-km-long, boomerang-shaped rupture, with a maximum coseismic slip of 20 cm at Guarapiche. The onshore extent of the surface rupture totalled 36 km, but may continue westward underwater, as suggested by the very shallow aftershock seismicity. This aftershock activity also clearly defined the steep north dip of the fault plane along the western rupture, suggesting tectonic inheritance on this major fault.From many locals' accounts, the rupture seems to have propagated from Pantoño to the west (highly asymmetric bidirectionality). This suggests that earthquake nucleation happened at or near the Casanay–Guarapiche restraining bend and rupture quickly propagated westward, allowing only a small fraction to progress eastwards beyond the bend. Additionally, the large fraction of after-slip (or creep) released is to be related to such restraining bend, which seems to have partly locked slip during rupture.  相似文献   

20.
The Havran-Bal?kesir Fault Zone (HBFZ) is one of the major active structures of the Southern Marmara Region, which has been shaped by the southern branch of North Anatolian fault since the Pliocene. HBFZ is a 10–12 km wide, 120 km long, right-lateral strike-slip fault zone that consists of two ENE-striking main faults, namely, the Havran-Balya and Bal?kesir faults. The 90-km-long Havran-Balya fault exhibits right-stepping en echelon geometry and is made up of (1) Havran, (2) Osmanlar, (3) Turplu and (4) Ovac?k fault segments. On the eastern part, the 70-km-long Bal?kesir fault is divided into two fault segments; (1) Gökçeyaz? and (2) Kepsut. We estimated the long-term slip rate between 3.59 and 3.78 mm/yr using river offset. The Kepsut, Gökçeyaz? and Ovac?k fault segments are capable of generating an earthquake with a moment magnitude of up to 7.2. Detailed palaeoseismological studies show that the HBFZ is responsible for some surface faulting earthquakes with an average recurrence interval of 1000–2000 years during the late Holocene. Considering the fact that there was no evidence of a surface-ruptured earthquake for 2000 years, it can be stated that there is a seismic gap on the Gökçeyaz? fault segment.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号