首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Heavy REE are compatible in clinopyroxene on the spinel lherzolite solidus   总被引：2，自引：0，他引：2  
Trace element partitioning between clinopyroxene and melt was investigated experimentally under conditions appropriate to near-solidus melting of spinel lherzolite in the upper mantle. Starting material was a high-Na, Al basalt glass previously shown to be a very low degree (1%) partial melt of spinel lherzolite at 1.5 GPa, 1269°C [Robinson et al., Earth Planet. Sci. Lett., in press]. The experiment was run with a spinel seed under sub-liquidus conditions (1255°C) to ensure clinopyroxene crystallisation. The experimental clinopyroxene composition is consistent with equilibrium close to the solidus of fertile mantle lherzolite, most notably in its high contents of Ca-Tschermak's (CaTs) molecule (22 mol %) and Na2O (1.4 wt%). Clinopyroxene–melt partition coefficients (D) for a wide range of trace elements, determined by SIMS analysis of run products, differ markedly from those reported in other studies under conditions less appropriate to mantle melting. In particular partition coefficients for the heavy rare earth elements (Gd–Lu) are greater than unity (e.g. DLu=1.45), and the critical partitioning parameter, (DSm/DNd)×(DHf/DLu), is 0.68. These features, which arise due to the high CaTs content of the clinopyroxene, dramatically reduce the required involvement of garnet in the melting region beneath mid-ocean ridges.  相似文献   

2.
Csaba  Szabó  Károly  Hidas  Enik&#;  Bali  Zoltán  Zajacz  István  Kovács  Kyounghee  Yang  Tibor  Guzmics  Kálmán  Török 《Island Arc》2009,18(2):375-400
In this paper we present a detailed textural and geochemical study of two equigranular textured amphibole-bearing spinel lherzolite xenoliths from Szigliget, Bakony–Balaton Highland Volcanic Field (BBHVF, western Hungary) containing abundant primary silicate melt inclusions (SMIs) in clinopyroxene rims and secondary SMIs in orthopyroxene (and rarely spinel) along healed fractures. The SMIs are dominantly composed of silicate glass and CO2-rich bubbles. Clinopyroxene and orthopyroxene are zoned in both studied xenoliths, especially with respect to Fe, Mg, Na, and Al contents. Cores of clinopyroxenes in both xenoliths show trace element distribution close to primitive mantle. Rims of clinopyroxenes are enriched in Th, U, light rare earth elements (LREEs) and medium REEs (MREEs). Amphiboles in the Szg08 xenolith exhibit elevated Rb, Ba, Nb, Ta, LREE, and MREE contents. The composition of silicate glass in the SMIs covers a wide range from the basaltic trachyandesite and andesite to phonolitic compositions. The glasses are particularly rich in P2O5. Both primary and secondary SMIs are strongly enriched in incompatible trace elements (mostly U, Th, La, Zr) and display a slight negative Hf anomaly. The development of zoned pyroxenes, as well as the entrapment of primary SMIs in the clinopyroxene rims, happened after partial melting and subsequent crystallization of clinopyroxenes, most probably due to an interaction between hot volatile-bearing evolved melt and mantle wall-rocks. This silicate melt filled microfractures in orthopyroxenes (and rarely spinels) resulting in secondary SMIs.  相似文献   

3.
Hidehisa  Mashima 《Island Arc》2005,14(2):165-177
Abstract   The major element and compatible trace element compositions of the northwest Kyushu basalts (NWKBs) collected from Saga-Futagoyama were analyzed to examine the petrogenesis of these basalts. Although nepheline-normative alkaline basalts are not found in the basalts from Saga-Futagoyama, the Saga-Futagoyama basalts almost cover the major element variations of NWKBs. The basalts can be chemically divided into two groups: an Fe-poor group (IPG) and an Fe-rich group (IRG). The compositional variation of IPG basalts is essentially controlled by the partial melting of the source as suggested by the following: (i) bulk rock MgO, FeO and NiO compositions indicate that some IPG samples were equilibrated with mantle olivine; and (ii) correlations between Al2O3, CaO and MgO are consistent with those of experimental partial melts of peridotites. The inconsistent behaviors of the elements compatible with clinopyroxene (Cpx), such as V (Sc and Cu), preclude the significant role of the fractional crystallization of Cpx and spinel in IPG variation. IPG basalts have low Al and high Fe concentrations compared to the products of melting experiments involving peridotites and pyroxenites, suggesting that the IPG source would have a lithology and bulk rock composition different from those of typical peridotites and pyroxenites. IRG basalts have negative correlations between Fe2O3* and MgO, and between V and Fe2O3*/MgO, indicating that IRG basalts would have fractionated Cpx. However, the anomalously Fe-rich feature of IRG basalts compared with NWKBs collected from other areas suggests that the role of Cpx fractionation in NWKBs is minor. Relatively low melting temperatures would have principally caused the large chemical variation of NWKBs.  相似文献   

4.
Abstract The Isabela ophiolite, the Philippines, is characterized by a lherzolite‐dominant mantle section, which was probably formed beneath a slow‐spreading mid‐ocean ridge. Several podiform chromitites occur in the mantle section and grade into harzburgite to lherzolite. The chromitites show massive, nodular, layered and disseminated textures. Clinopyroxene (±orthopyroxene/amphibole) inclusions within chromian spinel (chromite hereafter) are commonly found in the massive‐type chromitites. Large chromitites are found in relatively depleted harzburgite hosts having high‐Cr? (Cr/(Cr + Al) atomic ratio = ～0.5) chromite. Light rare earth element (LREE) contents of clinopyroxenes in harzburgites near the chromitites are higher than those in lherzolite with low‐Cr? chromite, whereas heavy REE (HREE) contents of clinopyroxenes are lower in harzburgite than in lherzolite. The harzburgite near the chromitites is not a residual peridotite after simple melt extraction from lherzolite but is formed by open‐system melting (partial melting associated with influx of primitive basaltic melt of deeper origin). Clinopyroxene inclusions within chromite in chromitites exhibit convex‐shaped REE patterns with low HREE and high LREE (+Sr) abundances compared to the host peridotites. The chromitites were formed from a hybridized melt enriched with Cr, Si and incompatible elements (Na, LREE, Sr and H2O). The melt was produced by mixing of secondary melts after melt–rock interaction and the primitive basaltic melts in large melt conduits, probably coupled with a zone‐refining effect. The Cr? of chromites in the chromitites ranges from 0.65 to 0.75 and is similar to those of arc‐related magmas. The upper mantle section of the Isabela ophiolite was initially formed beneath a slow‐spreading mid‐ocean ridge, later introduced by arc‐related magmatisms in response to a switch in tectonic setting during its obduction at a convergent margin.  相似文献   

5.
Experiments of the melt-peridotite reaction at pressures of 1 and 2 GPa and temperatures of 1250–1400°C have been carried out to understand the nature of the peridotite xenoliths in the Mesozoic high-Mg diorites and basalts of the North China Craton,and further to elucidate the processes in which the Mesozoic lithospheric mantle in this region was transformed.We used Fuxin alkali basalt,Feixian alkali basalt,and Xu-Huai hornblende-garnet pyroxenite as starting materials for the reacting melts,and lherzolite xenoliths and synthesized harzburgite as starting materials for the lithospheric mantle.The experimental results indicate that:(1)the reactions between basaltic melts and lherzolite and harzburgite at 1–2 GPa and 1300–1400°C tended to dissolve pyroxene and precipitate low-Mg#olivine(Mg#=83.6–89.3),forming sequences of dunite-lherzolite(D-L)and duniteharzburgite(D-H),respectively;(2)reactions between hornblende-garnet pyroxenite and lherzolite at 1 GPa and 1250°C formed a D-H sequence,whereas reactions at 2 GPa and 1350°C formed orthopyroxenite layers and lherzolite;and(3)the reaction between a partial melt of hornblende-garnet pyroxenite and harzburgite resulted in a layer of orthopyroxenite at the boundary of the pyroxenite and harzburgite.The reacted melts have higher MgO abundances than the starting melts,demonstrating that the melt-peridotite reactions are responsible for the high-Mg#signatures of andesites or adakitic rocks.Our experimental results support the proposition that the abundant peridotite and pyroxenite xenoliths in western Shandong and the southern Taihang Mountains might have experienced multiple modifications in reaction to a variety of melts.We suggest that melt-peridotite reactions played important roles in transforming the nature of the Mesozoic lithospheric mantle in the region of the North China Craton.  相似文献   

6.
Many ocean island basalts (OIB) that have isotopic ratios indicative of recycled crustal components in their source are silica-undersaturated and unlike silicic liquids produced from partial melting of recycled mid-ocean ridge basalt (MORB). However, experiments on a silica-deficient garnet pyroxenite, MIX1G, at 2.0-2.5 GPa show that some pyroxenite partial melts are strongly silica-undersaturated [M.M. Hirschmann et al., Geology 31 (2003) 481-484]. These low-pressure liquids are plausible parents of alkalic OIB, except that they are too aluminous. We present new partial melting experiments on MIX1G between 3.0 and 7.5 GPa. Partial melts at 5.0 GPa have low SiO2 (<48 wt%), low Al2O3 (<12 wt%) and high CaO (>12 wt%) at moderate MgO (12-16 wt%), and are more similar to primitive OIB compositions than lower-pressure liquids of MIX1G or experimental partial melts of anhydrous or carbonated peridotite. Solidus temperatures at 5.0 and 7.5 GPa are 1625 and 1825°C, respectively, which are less than 50°C cooler than the anhydrous peridotite solidus. The liquidus temperature at 5.0 GPa is 1725°C, indicating a narrow melting interval (∼100°C). These melting relations suggest that OIB magmas can be produced by partial melting of a silica-deficient pyroxenite similar to MIX1G if its melting residue contains significant garnet and lacks olivine. Such silica-deficient pyroxenites could be produced by interaction between recycled subducted oceanic crust and mantle peridotite or could be remnants of ancient oceanic lower crust or delaminated lower continental crust. If such compositions are present in plumes ascending with potential temperatures of 1550°C, they will begin to melt at about 5.0 GPa and produce appropriate partial melts. However, such hot plumes may also generate partial melts of peridotite, which could dilute the pyroxenite-derived partial melts.  相似文献   

7.
Most abyssal basalt can be divided into two groups based on major and minor element compositions of the glassy rinds of pillow lavas. Crystal differentiation models cannot relate one group to the other. Instead, depth of partial melting may exert the primary control. The first group (MORB-1) is characterized by low TiO2 and Na2O and higher MgO, and is derived from a primary melt originating from the spinel peridotite facies. The higher TiO2-NaO2 group (MORB-2) appears to have been derived from the lower-pressure (shallower depth) plagioclase peridotite facies. Mössbauer spectra show that MORB-1 is from a mantle source region with lower oxidation states (between the QFM and NNO buffers) than for MORB-2 (around the NNO buffer).  相似文献   

8.
Along the two volcanic off-rift zones in Iceland, the Snfellsnes volcanic zone (SNVZ) and the South Iceland volcanic zone (SIVZ), geochemical parameters vary regularly along the strike towards the centre of the island. Recent basalts from the SNVZ change from alkali basalts to tholeiites where the volcanic zone reaches the active rift axis, and their87Sr/86Sr andTh/U ratios decrease in the same direction. These variations are interpreted as the result of mixing between mantle melts from two distinct reservoirs below Snfellsnes. The mantle melt would be more depleted in incompatible elements, but witha higher3He/4He ratio (R/Ra≈ 20) beneath the centre of Iceland than at the tip of the Snfellsnes volcanic zone (R/Ra≈ 7.5).

From southwest to northeast along the SIVZ, the basalts change from alkali basalts to FeTi basalts and quartz-normative tholeiites. TheTh/U ratio of the Recent basalts increases and both (230Th/232Th) andδ18O values decrease in the same direction. This reflects an important crustal contamination of the FeTi-rich basalts and the quartz tholeiites. The two types of basalts could be produced through assimilation and fractional crystallization in which primary alkali basaltic and olivine tholeiitic melts ‘erode’ and assimilate the base of the crust. The increasingly tholeiitic character of the basalts towards the centre of Iceland, which reflects a higher degree of partial melting, is qualitatively consistent with increasing geothermal gradient and negative gravity anomaly.

The highest Sr isotope ratio in Recent basalts from Iceland is observed inÖrfajökull volcano, which has a3He/4He ratio (R/Ra≈ 7.8) close to the MORB value, and this might represent a mantle source similar to that of Mauna Loa in Hawaii.  相似文献   


9.
SEONG HEE  CHOI  JONG IK  LEE  CHUNG-HWA  PARK  JACQUES  MOUTTE 《Island Arc》2002,11(4):221-235
Abstract   Ultramafic xenoliths in alkali basalts from Jeju Island, Korea, are mostly spinel lherzolites with subordinate amounts of spinel harzburgites and pyroxenites. The compositions of major oxides and compatible to moderately incompatible elements of the Jeju peridotite xenoliths suggest that they are residues after various extents of melting. The estimated degrees of partial melting from compositionally homogeneous and unfractionated mantle to form the residual xenoliths reach 30%. However, their complex patterns of chondrite-normalized rare earth element, from light rare earth element (LREE)-depleted through spoon-shaped to LREE-enriched, reflect an additional process. Metasomatism by a small amount of melt/fluid enriched in LREE followed the former melt removal, which resulted in the enrichment of the incompatible trace elements. Sr and Nd isotopic ratios of the Jeju xenoliths display a wide scatter from depleted mid-oceanic ridge basalt (MORB)-like to near bulk-earth estimates along the MORB–oceanic island basalt (OIB) mantle array. The varieties in modal proportions of minerals, (La/Yb)N ratio and Sr-Nd isotopes for the xenoliths demonstrate that the lithospheric mantle beneath Jeju Island is heterogeneous. The heterogeneity is a probable result of its long-term growth and enrichment history.  相似文献   

10.
Melting relations of a glassy magnesian olivine tholeiite from the FAMOUS area have been studied within the pressure range 1 atm to 15 kbar. From 1 atm to 10 kbar, olivine is the liquidus phase, followed by plagioclase and Ca-rich clinopyroxene. Above 10 kbar, Ca-rich clinopyroxene appears on the liquidus, followed by orthopyroxene and spinel. Near 10 kbar, olivine, orthopyroxene, clinopyroxene, spinel and plagioclase crystallize within 10°C of the liquidus. This indicates that a liquid of this magnesian olivine tholeiite composition could coexist with mantle peridotite at about 10 kbar. This result is in agreement with the geochemistry of Ni; the Ni concentration of the studied sample corresponds to the theoretical concentration in a primary magma [14,15].These data suggest that at least some magnesian mid-oceanic ridge basalts (MORBs) could be primary melts segregated from the mantle at depths near the transition zone between plagioclase lherzolite and spinel lherzolite (about 10 kbar). Based on this model, the residual mantle after extraction of MORBs should be lherzolite, not harzburgite.High-pressure (7–10 kbar) fractionation models involving olivine, plagioclase and clinopyroxene, which have been proposed by several workers (e.g. [36]) to explain the varieties of MORBs, were re-emphasized based on this melting study. The rare occurrence of clinopyroxene as a phenocryst phase in MORBs is explained by precipitation in a magma chamber at high pressure, or by dissolution of clinopyroxene formed earlier at high pressure.  相似文献   

11.
Serpentinized rocks closely associated with Paleoproterozoic eclogitic metabasites were recently discovered at Eseka area in the northwestern edge of the Congo craton in southern Cameroon.Here,we present new field data,petrography,and first comprehensible wholerock geochemistry data and discuss the protolith and tectonic significance of these serpentinites in the region.The studied rock samples are characterized by pseudomorphic textures,including mesh microstructure formed by serpentine intergrowths with cores of olivine,bastites after pyroxene.Antigorite constitutes almost the whole bulk of the rocks and is associated(to the less amount) with tremolite,talc,spinel,and magnetite.Whole-rock chemistry of the Eseka serpentinites led to the distinction of two types.Type 1 has high MgO( 40 wt%) content and high Mg#values(88.80) whereas Type 2 serpentinite samples display relatively low MgO concentration and Mg#values(40 and 82.88 wt%,respectively).Both types have low Al/Si and high Mg/Si ratios than the primitive mantle,reflecting a refractory abyssal mantle peridotite protolith.Partial melting modeling indicates that these rocks were derived from melting of spinel peridotite before serpentinization.Bulk rock high-Ti content is similar to the values of subducted serpentinites( 50 ppm).This similarity,associated with the high Cr contents,spinel-peridotite protolith compositions and Mg/Si and Al/Si ratios imply that the studied serpentinites were formed in a subductionrelated environment.The U-shaped chondrite normalizedREE patterns of serpentinized peridotites,coupled with similar enrichments in LREE and HFSE,suggest the refertilized nature due to melt/rock interaction prior to serpentinization.Based on the results,we suggest that the Eseka serpentinized peridotites are mantle residues that suffered a high degree of partial melting in a subductionrelated environment,especially in Supra Subduction Zone setting.These new findings suggest that the Nyong series in Cameroon represents an uncontested Paleoproterozoic suture zone between the Congo craton and the Sao Francisco craton in Brazil.  相似文献   

12.
For any given volcanic field the compositions of primary melts provide important constraints on models of magmatic processes and volcanic eruptions. In this paper, based on petrography, olivine and bulk rock compositions, two tholeiitic picrites (samples C122 and C123) from Haleakala Volcano, east Maui are evaluated as possible primary melts. Sample C122 (bulk rock MgO = 16.6%) has a high apparent Mg-Fe exchange coefficient, KD, between olivine phenocrysts and bulk rock (0.6). However, major-elements and Ni mass-balance calculations show that the olivines in C122 are in equilibrium with the residual melt (matrix) after closed-system equilibrium fractionation of 25 wt.% olivine. Therefore, the Mg/Fe ratio, Ca content, and Ni content of C122 are consistent with the hypothesis that the bulk composition of C122 is close to a primary melt formed by partial melting of a mantle containing olivine with composition around Fo89 to Fo91. The uniform composition and small size (mostly 0.2–0.3 mm) of the olivine, and the glass patches in the matrix suggest fast ascent, and rapid cooling at shallow depth for C122. On the contrary, sample C123, which has an apparent KD (between the most mafic olivine megacrysts and the bulk rock) close to the equilibrium value (0.27), the multiple planar subgrain boundaries in most of the olivine crystals indicate that it may not be a primary melt unless the deformed olivines are generated at magmatic condition as phenocrysts. If the deformed subgrain boundary texture in olivine could indeed be generated at magmatic condition, then the wide compositional range of olivine crystals in C123 (Fo74 to Fo91) suggests multi-stage crystallization over a wide range of cooling temperatures.The compositions of the two picrites, and a differentiated basalt which does not contain xenocrysts suggest that the Haleakala tholeiites are derived from primary melts with at least 16–17 wt.% MgO. Lavas with such high MgO content are rare in Haleakala and other Hawaiian volcanoes; therefore, most Hawaiian tholeiites must have undergone extensive fractionation histories.  相似文献   

13.
Abstract Ultramafic xenoliths found in alkali basalts from Jeju Island, Korea are mostly spinel lherzolites accompanied by subordinate amount of spinel harzburgites and pyroxenites. The combination of results from a two-pyroxene geothermometer and Ca-in-olivine geobarometer yields temperature–pressure (T–P) estimates for spinel peridotites that fall in experimentally determined spinel lherzolite field in CaO-Fe-MgO-Al2O3-SiO2-Cr2O3 (CFMASCr) system. These T–P data sets have been used to construct the Quaternary Jeju Island geotherm, which defines a locus from about 13 kbar at 880°C to 26 kbar at 1040°C. The geothermal gradient of Jeju Island is greater than that of the conventional conductive models, and may be as a result of a thermal perturbation by the heat input into the lithospheric mantle via the passage and emplacement of magma. Spinel–lherzolite is the main constituent rock-type of the lithospheric mantle beneath Jeju Island. Pyroxenites may be intercalated in peridotites at similar depth and temperature as re-equilibrated veins or lenses.  相似文献   

14.
Abstract   Spinel lherzolite is a minor component of the deep-seated xenolith suite in the Oki-Dogo alkaline basalts, whereas other types of ultramafic (e.g. pyroxenite and dunite) and mafic (e.g. granulite and gabbro) xenoliths are abundant. All spinel lherzolite xenoliths have spinel with a low Cr number (Cr#; < 0.26). They are anhydrous and are free of modal metasomatism. Their mineral assemblages and microtextures, combined with the high NiO content in olivine, suggest that they are of residual origin. But the Mg numbers of silicate minerals are lower (e.g. down to Fo86) in some spinel lherzolites than in typical upper mantle residual peridotites. The clinopyroxene in the spinel lherzolite shows U-shaped chondrite-normalized rare-earth element (REE) patterns. The abundance of Fe-rich ultramafic and mafic cumulate xenoliths in Oki-Dogo alkali basalts suggests that the later formation of those Fe-rich cumulates from alkaline magma was the cause of Fe- and light REE (LREE)-enrichment in residual peridotite. The similar REE patterns are observed in spinel peridotite xenoliths from Kurose and also in those from the South-west Japan arc, which are non-metasomatized in terms of major-element chemistry (e.g. Fo > 89), and are rarely associated with Fe-rich cumulus mafic and ultramafic xenoliths. This indicates that the LREE-enrichment in mantle rocks has been more prominent and prevalent than Fe and other major-element enrichment during the metasomatism.  相似文献   

15.
The Cenozoic basaltic province of the Vogelsberg area (central Germany) is mainly composed of intercalated olivine to quartz tholeiites and near-primary nephelinites to basanites. The inferred mantle source for the alkaline and tholeiitic rocks is asthenospheric metasomatized garnet peridotite containing some amphibole as the main hydrous phase. Trace element modelling indicates 2 to 3% partial melting for the alkaline rocks and 5 to 7% partial melting for the olivine tholeiites. Incompatible trace element abundances and ratios as well as Nd and Sr radiogenic isotope compositions lie between plume compositions and enriched mantle compositions and are similar to those measured in Ocean Island Basalts (OIB) and the Central European Volcanic Province elsewhere. The mafic olivine tholeiites have similar Ba/Nb, Ba/La and Nd–Sr isotope ratios to the alkaline rocks indicating derivation of both magma types from chemically comparable mantle sources. However, Zr/Nb ratios are slightly higher in olivine tholeiites than in basanites reflecting some fractionation of Zr relative to Nb during partial melting. Quartz tholeiites have higher Ba/Nb, Zr/Nb, La/Nb, but lower Ce/Pb ratios and lower Nd isotope compositions than the alkaline rocks which can be explained by interaction of the basaltic melt with lower (granulite facies) crustal material or partial melts thereof during stagnation within the lower crust. It appears most likely that upwelling of hot, asthenospheric material results in the generation of primitive alkaline rocks at the base of the lithosphere at depths of 75–90 km. Lithospheric extension together with minor plume activity and probably lower lithosphere erosion induced melting of shallower heterogenous upper mantle generating a spectrum of olivine tholeiitic melts. These olivine tholeiitic rocks evolved via crystal fractionation and probably limited contamination to quartz tholeiites.  相似文献   

16.
Abstract Peridotite xenoliths from the subarc mantle, which have been rarely documented, are described from Iraya volcano of the Luzon arc, the Philippines, and are discussed in the context of wedge-mantle processes. They are mainly harzburgite, with subordinate dunite, and show various textures from weakly porphyroclastic (C-type) to extremely fine-grained equigranular (F-type). Textural characteristics indicate a transition from the former to the latter by recrystallization. The F-type peridotite has inclusion-rich fine-grained olivine and radially aggregated orthopyroxene, being quite different in texture from ordinary mantle-derived peridotites previously documented. Despite their strong textural contrast, the two types do not show any systematic difference in modal composition. The harzburgite of C-type has ordinary mantle peridotite mineralogy; olivine is mostly Fo91–92 and chromian spinel mostly has Cr#s (= Cr/[Cr + Al] atomic ratios) from 0.3 to 0.6. Olivine is slightly more Fe-rich (Fo89–91) and spinel is more enriched in Cr (the Cr#, 0.4–0.8) and Fe3+ in F-type peridotites than in C-type harzburgite. Orthopyroxene in F-type peridotites is relatively low in CaO (<1 wt%), Al2O3 (<2 wt%) and Cr2O3 (<0.4 wt%). The F-type peridotite was possibly formed from the C-type one by recrystallization including local dissolution and precipitation of orthopyroxene assisted by fluid (or melt) of subduction origin. Textural characteristics, however, indicate a deserpentinization origin from abyssal serpentinite of which protolith was a C-type peridotite. In this scenario the initial abyssal serpentinite was possibly dehydrated due to an initiation of magmatic activity beneath an incipient oceanic arc like Batan Island. The F-type peridotite is characteristic of the upper mantle of island arc, especially of incipient arc.  相似文献   

17.
Major-element, Cl, S, F analyses have been performed on a wide selection of melt inclusions trapped in olivine (Fo81–87) from scoria and crystal-rich lapilli samples of Piton de la Fournaise volcano. As a whole, they display a transitional basaltic composition. The melt inclusions (8–9 wt.% MgO, 0.62–0.73 wt.% K2O) are in equilibrium with olivines (Fo81–85) in the samples from the Central Feeding Zone and the South-East Feeding Zone and show a slight alkaline affinity. The melt inclusions in olivines (Fo85–87) from the North-West Rift (NWR) contain 9.3–9.7 wt.% MgO and 0.54–0.58 wt.% K2O, with a more tholeiitic tendency. In oceanitic lavas and crystal-rich lapilli, the olivine xenocrysts are recognisable by the presence of one or more secondary shear plane fracture(s) filled up with CO2 and alkali-rich basaltic melt inclusions. In dunite nodules, olivines present also contain several secondary shear plane fracture(s) filled up with CO2 and high-SiO2 melt inclusions. Secondary CO2-rich fluid inclusions in olivine (Fo85–87) from the NWR samples indicate PCO2 up to 500 MPa whereas, PCO2 ranges from 95 MPa to few tenths of bars in the other samples. Both the primary melt inclusions and the secondary fluid inclusions strongly suggest that the olivine crystallises and accumulates over a wide depth range (15 km). It is envisioned that cumulative pockets with low residual porosity are repeatedly percolated with a CO2-rich fluid phase, possibly associated with basaltic to SiO2-rich melts, and are finally disrupted and entrained to the surface when vigorous magma transfer occurs. The SiO2-rich residual melts in early-formed dunitic or gabbroic bodies may have acted as contaminant agents for the more alkali character of magmas vented through the central feeding system, where a well-developed cumulative system is thought to exist. Finally, the existence of secondary fluid and melt inclusions in olivines implies that the dunitic bodies are weakened on the micrometric scale.  相似文献   

18.
This paper provides new constraints on the crystallization conditions of the 3.49 Ga Barberton komatiites. The compositional evidence from igneous pyroxene in the olivine spinifex komatiite units indicates that the magma contained significant quantities of dissolved H2O. Estimates are made from comparisons of the compositions of pyroxene preserved in Barberton komatiites with pyroxene produced in laboratory experiments at 0.1 MPa (1 bar) under anhydrous conditions and at 100 and 200 MPa (1 and 2 kbar) under H2O-saturated conditions on an analog Barberton composition. Pyroxene thermobarometry on high-Ca clinopyroxene compositions from ten samples requires a range of minimum magmatic water contents of 6 wt.% or greater at the time of pyroxene crystallization and minimum emplacement pressures of 190 MPa (6 km depth). Since high-Ca pyroxene appears after 30% crystallization of olivine and spinel, the liquidus H2O contents could be 4 to 6 wt.% H2O. The liquidus temperature of the Barberton komatiite composition studied is between 1370 and 1400°C at 200 MPa under H2O-saturated conditions. When compared to the temperature-depth regime of modern melt generation environments, the komatiite mantle source temperatures are 200°C higher than the hydrous mantle melting temperatures inferred in modern subduction zone environments and 100°C higher than mean mantle melting temperatures estimated at mid-ocean ridges. When compared to previous estimates of komatiite liquidus temperatures, melting under hydrous conditions occurs at temperatures that are 250°C lower than previous estimates for anhydrous komatiite. Mantle melting by near-fractional, adiabatic decompression takes place in a melting column that spans 38 km depth range under hydrous conditions. This depth interval for melting is only slightly greater than that observed in modern mid-ocean ridge environments. In contrast, anhydrous fractional melting models of komatiite occur over a larger depth range ( 130 km) and place the base of the melting column into the transition zone.  相似文献   

19.
Keiko  Hattori  Simon  Wallis  Masaki  Enami  Tomoyuki  Mizukami 《Island Arc》2010,19(1):192-207
The Higashi-akaishi garnet-bearing ultramafic body in the Sanbagawa metamorphic belt, Southwest Japan, represents a rare example of oceanic-type ultrahigh-pressure metamorphism. The body of 2 km × 5 km is composed mostly of anhydrous dunite with volumetrically minor lenses of clinopyroxene-rich rocks. Dunite samples contain high Ir-type platinum group elements (PGE) and Cr in bulk rocks, high Mg and Ni in olivine, and high Cr in spinel. On the other hand, clinopyroxene-rich rocks contain low concentrations of Ir-type PGE and Cr, high concentrations of fluid-mobile elements in bulk rocks, and low Ni and Mg in olivine. Clinopyroxene is diopsidic with low Al2O3. The compositions of bulk rocks and mineral chemistry of spinel, olivine, and clinopyroxene suggest that the olivine-dominated rocks are residual mantle peridotites after high degrees of influx partial melting, and that the clinopyroxene-rich rocks are cumulates of subduction-related melts. Thus, the Higashi-akaishi ultramafic body originated from the interior of the mantle wedge, most likely the forearc upper mantle. It was then incorporated into the Sanbagawa subduction channel by a mantle flow, and underwent high pressure metamorphism to a depth greater than 100 km. Such a strong active flow in the mantle wedge is likely facilitated by the lack of serpentinites along the interface between the slab and the overlying mantle, as it was too hot for serpentine. These unusually hot conditions and strong active mantle flow may reflect conditions in the earliest stage of development of subduction, and may have been maintained by massive upwelling and subsequent eastward flow of asthenospheric mantle in the northeastern Asian continent in Cretaceous time when the Sanbagawa belt began to form.  相似文献   

20.
Arc volcanoes occur at convergent margins with a wide range in subduction parameters, and variations in these parameters might be expected to lead to variations in the chemistry of magmas parental to arcs. Major element analyses from approximately 100 volcanic centers within 30 arcs, normalized to 6% MgO to minimize the effects of crystal fractionation, display wide variations. Na2O and CaO at 6% MgO (Na6.0 and Ca6.0) correlate remarkably well with the thickness of the overlying crust. These systematics are consistent with two possible models. In the first model, the crust behaves as a chemical filter; where the crust is thick, magmas crystallize at higher pressure and interact more extensively with the arc crust. Modeling of high-pressure crystallization and assimilation, however, does not reproduce the associated variations in Na6.0 and Ca6.0 without calling upon complicated combinations of fractionating phases and assimilants. In the second model, crustal thickness determines the height of the mantle column available for melting beneath arc volcanoes. If melting begins beneath arcs at similar depths, then the column of mantle that undergoes decompression melting is much shorter beneath the thickest arc crust. The shorter mantle column for arcs built on thick crust will lead to smaller extents of melting in the mantle, and hence higher Na6.0 and lower Ca6.0 in the parental magmas. Modeling shows that variations in the extent of melting in the mantle can easily account for the associated variations in Ca6.0 and Na6.0. The abundances of the other major elements at 6% MgO do not correlate well with crustal thickness, or any other subduction parameter. Co-variation of some of these other major elements (e.g., Si6.0 and Fe6.0) within individual arcs suggests that they are strongly influenced by local crustal level processes that obscure partial melting systematics. Correction for the crustal processes improves the relationship between Na6.0 and Ca6.0 that is so readily explained by partial melting. The extents of melting in the mantle beneath arc volcanoes estimated from the ranges in Na6.0 and Ca6.0 are remarkably similar to those estimated beneath mid-ocean ridges. This observation provides further evidence that the mantle wedge, and not the slab, melts beneath arc volcanic fronts.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号