首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 593 毫秒
1.
Propagation of brittle failure triggered by magma in Iceland   总被引：1，自引：1，他引：1  
Tatiana Tentler   《Tectonophysics》2005,406(1-2):17-38
The architectures of normal faults at a divergent plate boundary in Iceland are examined by combining surface fault observations with cross-sectional studies at different structural levels to constrain a model of failure propagation. The structures of Holocene faults defining graben are analyzed to characterize the upper-most parts of ruptures. The shapes of faults resulting from growth and interaction of separate segments are used to better understand failure propagation inferred to occur in the intervening stages of displacement accumulation and lateral propagation. Pleistocene faults in volcanic sequences exhumed from 800 to 1000 m are analyzed to characterize deeper portions of failure that occurred beneath the central rift zone. Tertiary dikes exhumed from depths of 1300–1500 m are studied to infer how magma controls the failure initiation. Field studies in combination with a literature review indicate that the planar ruptures are likely to initiate at depth as magma-filled vertical fractures and lengthen upward and laterally. As failures propagate to higher crustal levels, they are likely to change into inclined normal faults. At near-surface levels, faults link with cooling joints and dilational fractures propagating downward from the surface. It is suggested that the inferred stages of fault propagation are characteristic for normal faults developed at spreading ridges.  相似文献   

2.
Pressure variations in a magma reservoir may cause deformation at the surface and a redistribution of the stress in the surrounding rock. In this study, we use two‐dimensional numerical models and elaborate how magma chamber inflation and deflation affect the stress field around and surface displacement. We test how a pre‐existing normal fault near the magma reservoir may influence the pattern of stress. We demonstrate the possibility of initiating both normal and reverse slip on faults during the inflation of the magma reservoir. The Coulomb failure stress changes are calculated during the periods of pressure variation. An increase of Coulomb failure stress can be predicted above and below the magma chamber during increasing magma chamber pressure that may encourage earthquakes. This process can produce cracks and fault growth encouraging magma propagation along the cracked zone. A different distribution of the stress change is expected in the case of subsequent deflation of the overpressured magma reservoir. In this case, seismicity is expected on a plane at equal depth than the magma chamber, laterally offset from the extent of the magma chamber. Magma could propagate laterally from the magma reservoir into zones where cracks have been generated, but only if the resolved shear stress on the fault is small compared with the excess magma pressure.  相似文献   

3.
Tertiary and/or Quaternary tectonic faulting is documented in three areas of southernmost Illinois: the Fluorspar Area Fault Complex (FAFC) in Pope and Massac Counties, the Ste. Genevieve Fault Zone (SGFZ) in Alexander and Union Counties, and the Commerce Fault Zone (CFZ) in Alexander County.

In the FAFC, faults that strike NE and NNE displace Mounds Gravel (late Miocene to early Pleistocene) and, locally, the Metropolis terrace gravel (Pleistocene; pre-Woodfordian). No Woodfordian or younger deposits are deformed. Faults typically outline narrow, linear grabens that formed under tension with a component of strike slip.

North-south to NW-trending vertical faults near the southeast end of the SGFZ displace Eocene sediments. Again, faults outline narrow grabens and show indications of strike slip. Deformed Quaternary sediments have not been observed.

The CFZ, which trends northeast, displaces Mounds Gravel in Illinois and units as young as Peoria Silt (Woodfordian) in Missouri. Quaternary movement has been interpreted as right-lateral strike-slip. The CFZ coincides with a subtle gravity and magnetic lineament and seems to reflect a major feature in the basement. Surface expression in Illinois is subtle, but mafic and ultramafic intrusions, hydrothermal alteration and small faults align with the Commerce geophysical lineament. Earthquake foci in Missouri and Illinois lie on or close to the CFZ; some focal mechanisms fit the fault trend.

Among these structures, only the CFZ exhibits slip that conforms to the current stress field (principal compressive stress axis E-W to ENE-WSW). Possibly, the stress field changed during Neogene time. Alternatively, high fluid pressures or local stress concentrations may have induced slip on less favorably oriented fractures. Tighter constraints are needed on timing, magnitude, and direction of Neogene displacement.  相似文献   


4.
The Weihe Graben is not only an important Cenozoic fault basin in China but also a significant active seismic zone. The Huashan piedmont fault is an important active fault on the southeast side of the Weihe Graben and has been highly active since the Cenozoic. The well–known Great Huaxian County Earthquake of 1556 occurred on the Huashan piedmont fault. This earthquake, which claimed the lives of approximately 830000 people, is one of the few large earthquakes known to have occurred on a high–angle normal fault. The Huashan piedmont fault is a typical active normal fault that can be used to study tectonic activity and the associated hazards. In this study, the types and characteristics of late Quaternary deformation along this fault are discussed from geological investigations, historical research and comprehensive analysis. On the basis of its characteristics and activity, the fault can be divided into three sections, namely eastern, central and western. The eastern and western sections display normal slip. Intense deformation has occurred along the two sections during the Quaternary; however, no deformation has occurred during the Holocene. The central section has experienced significant high–angle normal fault activity during the Quaternary, including the Holocene. Holocene alluvial fans and loess cut by the fault have been identified at the mouths of many stream valleys of the Huashan Mountains along the central section of the Huashan piedmont fault zone. Of the three sections of the Huashan piedmont fault, the central section is the most active and was very active during the late Quaternary. The rate of normal dip–slip was 1.67–2.71±0.11 mm/a in the Holocene and 0.61±0.15 mm/a during the Mid–Late Pleistocene. As is typical of normal faults, the late Quaternary activity of the Huashan piedmont fault has produced a set of disasters, which include frequent earthquakes, collapses, landslides, mudslides and ground fissures. Ground fissures mainly occur on the hanging–wall of the Huashan piedmont fault, with landslides, collapses and mudslides occurring on the footwall.  相似文献   

5.
作为郯庐断裂带北段主干的依兰-伊通断裂, 其新构造活动性与活动规律仍然存在不同的认识.本次工作通过详细的野外调查, 发现该断裂内活断层广泛存在, 由东、西两支北东走向的主干活断层构成, 沿着古近纪地堑边界断层发育.这些活断层主要呈破碎型结构, 多为逆右行平移活动.通过对这些活断层一系列实测擦痕反演应力场, 显示它们多是在东西向挤压中活动的, 而现今应力场转变为北东东-南西西向区域性挤压.依据本次野外观察与14 C定年, 并结合前人定年结果与近代地震分布, 表明依兰-伊通西支活断层的最新活动时代为全新世与晚更新世相间, 而东支活断层的最新活动时代主要为早-中更新世.依兰-伊通断裂内活断层显示了明显的差异性活动, 表现为西支的活动强度明显大于东支, 西支的最新活动时代皆晚于东支, 沿走向上活动性强、弱相间与最新活动时代不断变化, 以及近代地震活动不均一分布.它们沿走向上的分段性、差异性活动主要是因为被一系列北西向断层切断所致.  相似文献   

6.
内蒙东部晚第四纪火山活动与新构造   总被引：8，自引：4，他引：4  
本文所指的晚第四纪包括晚更新世和全新世。内蒙东部晚第四纪火山活动强烈,北起大兴安岭北部的鄂伦春诺敏河火山群、经阿尔山-柴河、锡林浩特-阿巴嘎火山群,南抵察右后旗乌兰哈达火山群,断续延伸约1000km,分布着约390余座大小不一、形态各异的火山,构成了内蒙东部壮观的北北东向第四纪火山喷发带。火山类型包括玛珥式、夏威夷式、斯通博利式、亚布里尼式和冰岛式,以斯通博利式最为发育。爆破式火山作用包括射汽、射汽-岩浆爆发和岩浆爆发。火山岩类型主要为碱性玄武岩及其火山碎屑物(岩),火山岩具初期裂谷构造属性。火山活动主体受北北东向基底断裂控制,但就具体火山群而言,又多处于北东和北西向基底深断裂交会处。区内新构造与火山活动密切相关,深部岩浆的上侵,可能是控制本区新构造活动的主因。尤其是全新世火山的空间展布,显示了内蒙东部新构造的活动性。  相似文献   

7.
Dextral transtensional deformation is occurring along the Sierra Nevada–Great Basin boundary zone (SNGBBZ) at the eastern edge of the Sierra Nevada microplate. In the Lake Tahoe region of the SNGBBZ, transtension is partitioned spatially and temporally into domains of north–south striking normal faults and transitional domains with conjugate strike-slip faults. The normal fault domains, which have had large Holocene earthquakes but account only for background seismicity in the historic period, primarily accommodate east–west extension, while the transitional domains, which have had moderate Holocene and historic earthquakes and are currently seismically active, primarily record north–south shortening. Through partitioned slip, the upper crust in this region undergoes overall constrictional strain.Major fault zones within the Lake Tahoe basin include two normal fault zones: the northwest-trending Tahoe–Sierra frontal fault zone (TSFFZ) and the north-trending West Tahoe–Dollar Point fault zone. Most faults in these zones show eastside down displacements. Both of these fault zones show evidence of Holocene earthquakes but are relatively quiet seismically through the historic record. The northeast-trending North Tahoe–Incline Village fault zone is a major normal to sinistral-oblique fault zone. This fault zone shows evidence for large Holocene earthquakes and based on the historic record is seismically active at the microearthquake level. The zone forms the boundary between the Lake Tahoe normal fault domain to the south and the Truckee transition zone to the north.Several lines of evidence, including both geology and historic seismicity, indicate that the seismically active Truckee and Gardnerville transition zones, north and southeast of Lake Tahoe basin, respectively, are undergoing north–south shortening. In addition, the central Carson Range, a major north-trending range block between two large normal fault zones, shows internal fault patterns that suggest the range is undergoing north–south shortening in addition to east–west extension.A model capable of explaining the spatial and temporal partitioning of slip suggests that seismic behavior in the region alternates between two modes, one mode characterized by an east–west minimum principal stress and a north–south maximum principal stress as at present. In this mode, seismicity and small-scale faulting reflecting north–south shortening concentrate in mechanically weak transition zones with primarily strike-slip faulting in relatively small-magnitude events, and domains with major normal faults are relatively quiet. A second mode occurs after sufficient north–south shortening reduces the north–south Shmax in magnitude until it is less than Sv, at which point Sv becomes the maximum principal stress. This second mode is then characterized by large earthquakes on major normal faults in the large normal fault domains, which dominate the overall moment release in the region, producing significant east–west extension.  相似文献   

8.
Fractures can provide valuable information for tectonic evolution. According to the data of outcrops, cores, thin sections and well logs, the tectonic fractures in the Qaidam Basin can be divided into four types: small faults (including small normal fault and small reverse fault), vertical open fracture, bedding plane slip fracture and horizontal open fracture. Our fracture observations provide new constraints on the Cenozoic tectonic evolution of the Qaidam Basin. Syn-sedimentary small normal faults in the Paleogene strata indicate the extension deformation during the Paleogene. Small reverse faults, vertical open fractures and bedding plane slip fractures occurred in the Paleogene and Neogene strata have genetic relationship. According to the burial history and homogenization temperature of fluid inclusions of gypsum and calcite filled in the vertical open fractures, it can be deduced that the vertical open fractures being formed mainly from the late Miocene Shangyoushashan Formation with age of 5.1?Ma to the end of Pliocene Shizigou Formation with age of 2.6?Ma, indicating small reverse faults, vertical open fractures and bedding plane slip fractures were simultaneously formed in the Neogene. These fractures were resulted from the compression deformation. The horizontal open fractures occurred in the Paleogene, Neogene and Quaternary strata with apertures and intensities decreasing with depth were formed by the large-scale quick uplift and denudation resulted from the strong compression deformation since the Quaternary.  相似文献   

9.
Quaternary tectonic faulting in the Eastern United States   总被引：1，自引：0，他引：1  
Paleoseismological study of geologic features thought to result from Quaternary tectonic faulting can characterize the frequencies and sizes of large prehistoric and historical earthquakes, thereby improving the accuracy and precision of seismic-hazard assessments. Greater accuracy and precision can reduce the likelihood of both underprotection and unnecessary design and construction costs. Published studies proposed Quaternary tectonic faulting at 31 faults, folds, seismic zones, and fields of earthquake-induced liquefaction phenomena in the Appalachian Mountains and Coastal Plain. Of the 31 features, seven are of known origin. Four of the seven have nontectonic origins and the other three features are liquefaction fields caused by moderate to large historical and Holocene earthquakes in coastal South Carolina, including Charleston; the Central Virginia Seismic Zone; and the Newbury, Massachusetts, area. However, the causal faults of the three liquefaction fields remain unclear. Charleston has the highest hazard because of large Holocene earthquakes in that area, but the hazard is highly uncertain because the earthquakes are uncertainly located.Of the 31 features, the remaining 24 are of uncertain origin. They require additional work before they can be clearly attributed either to Quaternary tectonic faulting or to nontectonic causes. Of these 24, 14 features, most of them faults, have little or no published geologic evidence of Quaternary tectonic faulting that could indicate the likely occurrence of earthquakes larger than those observed historically. Three more features of the 24 were suggested to have had Quaternary tectonic faulting, but paleoseismological and other studies of them found no evidence of large prehistoric earthquakes. The final seven features of uncertain origin require further examination because all seven are in or near urban areas. They are the Moodus Seismic Zone (Hartford, Connecticut), Dobbs Ferry fault zone and Mosholu fault (New York City), Lancaster Seismic Zone and the epicenter of the shallow Cacoosing Valley earthquake (Lancaster and Reading, Pennsylvania), Kingston fault (central New Jersey between New York and Philadelphia), and Everona fault-Mountain Run fault zone (Washington, D.C., and Arlington and Alexandria, Virginia).  相似文献   

10.
The Huoshan Fault, being of NEN strike, is one of the most important faults in the Shanxi Graben System of North China; it is the location of the 1303 A.D. Hongtong earthquake (MS = 8.0). The late Pleistocene and Holocene offset of some gullies that cross the fault and some fault scratches have proved its right lateral movement during the late Quaternary; however, until now, geological evidence to support the movement in the Neogene and early Quaternary was scarce. Our work provides further crucial evidence that supports both its movement in the late Cenozoic and the total right-lateral displacement since the Pliocene. The difference in the outcrop heights of the Pliocene sediment along the fault, the difference in the geomorphological development along the fault, the inconsistency in the lithological composition of the Pliocene proluvial gravels with the rock types within the catchments of the current upper stream, and the offset of the Pliocene alluvial gravels all completely indicate that the fault has always moved right-laterally since the Pliocene. Additionally, this evidence indicates that the accumulative displacement is up to 12.5 km. Based on the horizontal and vertical displacement of the fault since the Pliocene, the time-averaged horizontal slip rate of the fault is estimated to be about 3.5 mm/a, while the ratio of the horizontal to vertical offsets is about 3.8; these data are roughly close to the results that were acquired from the Holocene and the present movement of the fault. This similarity in the tectonic movement parameters may imply that the intensity as well as the configuration of the regional stress field has remained constant, and that no significant changes have taken place since the Pliocene.  相似文献   

11.
The study region is located in the Lower Tagus Valley, central Portugal, and includes a large portion of the densely populated area of Lisbon. It is characterized by a moderate seismicity with a diffuse pattern, with historical earthquakes causing many casualties, serious damage and economic losses. Occurrence of earthquakes in the area indicates the presence of seismogenic structures at depth that are deficiently known due to a thick Cenozoic sedimentary cover. The hidden character of many of the faults in the Lower Tagus Valley requires the use of indirect methodologies for their study. This paper focuses on the application of high-resolution seismic reflection method for the detection of near-surface faulting on two major tectonic structures that are hidden under the recent alluvial cover of the Tagus Valley, and that have been recognized on deep oil-industry seismic reflection profiles and/or inferred from the surface geology. These are a WNW–ESE-trending fault zone located within the Lower Tagus Cenozoic basin, across the Tagus River estuary (Porto Alto fault), and a NNE–SSW-trending reverse fault zone that borders the Cenozoic Basin at the W (Vila Franca de Xira–Lisbon fault). Vertical electrical soundings were also acquired over the seismic profiles and the refraction interpretation of the reflection data was carried out. According to the interpretation of the collected data, a complex fault pattern disrupts the near surface (first 400 m) at Porto Alto, affecting the Upper Neogene and (at least for one fault) the Quaternary, with a normal offset component. The consistency with the previous oil-industry profiles interpretation supports the location and geometry of this fault zone. Concerning the second structure, two major faults were detected north of Vila Franca de Xira, supporting the extension of the Vila Franca de Xira–Lisbon fault zone northwards. One of these faults presents a reverse geometry apparently displacing Holocene alluvium. Vertical offsets of the Holocene sediments detected in the studied geophysical data of Porto Alto and Vila Franca de Xira–Lisbon faults imply minimum slip rates of 0.15–0.30 mm/year, three times larger than previously inferred for active faults in the Lower Tagus Valley and maximum estimates of average return periods of 2000–5000 years for M 6.5–7 co-seismic ruptures.  相似文献   

12.
A few cases of occurrence of normal aftershocks after strike slip earthquakes in compressive regime have been reported in the literature. Occurrence of such aftershocks is intriguing as they occurred despite the apparent stabilizing influence of compressive plate tectonic stresses on the normal faults. To investigate the occurrence processes of such earthquakes, we calculate change in static stress on optimally oriented normal and reverse faults in the dilational and compressional step over zones, respectively, due to slip on a vertical strike slip fault under compressive regime. We find that change in static stress is much more pronounced on normal faults as compared to that on reverse faults, for all values of fault friction. Change in static stress on reverse fault is marginally positive only when the fault friction is low, whereas for normal faults it is positive for all values of fault friction, and is maximum for high fault friction. We suggest that strike slip faulting in compressive regime creates a localized tensile environment in the dilational step over zone, which causes normal faulting in that region. The aftershocks on such normal faults are considered to have occurred as an almost instantaneous response of stress transfer due to strike slip motion.  相似文献   

13.
A few cases of occurrence of normal aftershocks after strike slip earthquakes in compressive regime have been reported in the literature. Occurrence of such aftershocks is intriguing as they occurred despite the apparent stabilizing influence of compressive plate tectonic stresses on the normal faults. To investigate the occurrence processes of such earthquakes, we calculate change in static stress on optimally oriented normal and reverse faults in the dilational and compressional step over zones, respectively, due to slip on a vertical strike slip fault under compressive regime. We find that change in static stress is much more pronounced on normal faults as compared to that on reverse faults, for all values of fault friction. Change in static stress on reverse fault is marginally positive only when the fault friction is low, whereas for normal faults it is positive for all values of fault friction, and is maximum for high fault friction. We suggest that strike slip faulting in compressive regime creates a localized tensile environment in the dilational step over zone, which causes normal faulting in that region. The aftershocks on such normal faults are considered to have occurred as an almost instantaneous response of stress transfer due to strike slip motion.  相似文献   

14.
Large earthquakes in strike-slip regimes commonly rupture fault segments that are oblique to each other in both strike and dip. This was the case during the 1999 Izmit earthquake, which mainly ruptured E–W-striking right-lateral faults but also ruptured the N60°E-striking Karadere fault at the eastern end of the main rupture. It will also likely be so for any future large fault rupture in the adjacent Sea of Marmara. Our aim here is to characterize the effects of regional stress direction, stress triggering due to rupture, and mechanical slip interaction on the composite rupture process. We examine the failure tendency and slip mechanism on secondary faults that are oblique in strike and dip to a vertical strike-slip fault or “master” fault. For a regional stress field well-oriented for slip on a vertical right-lateral strike-slip fault, we determine that oblique normal faulting is most favored on dipping faults with two different strikes, both of which are oriented clockwise from the strike-slip fault. The orientation closer in strike to the master fault is predicted to slip with right-lateral oblique normal slip, the other one with left-lateral oblique normal slip. The most favored secondary fault orientations depend on the effective coefficient of friction on the faults and the ratio of the vertical stress to the maximum horizontal stress. If the regional stress instead causes left-lateral slip on the vertical master fault, the most favored secondary faults would be oriented counterclockwise from the master fault. For secondary faults striking ±30° oblique to the master fault, right-lateral slip on the master fault brings both these secondary fault orientations closer to the Coulomb condition for shear failure with oblique right-lateral slip. For a secondary fault striking 30° counterclockwise, the predicted stress change and the component of reverse slip both increase for shallower-angle dips of the secondary fault. For a secondary fault striking 30° clockwise, the predicted stress change decreases but the predicted component of normal slip increases for shallower-angle dips of the secondary fault. When both the vertical master fault and the dipping secondary fault are allowed to slip, mechanical interaction produces sharp gradients or discontinuities in slip across their intersection lines. This can effectively constrain rupture to limited portions of larger faults, depending on the locations of fault intersections. Across the fault intersection line, predicted rakes can vary by >40° and the sense of lateral slip can reverse. Application of these results provides a potential explanation for why only a limited portion of the Karadere fault ruptured during the Izmit earthquake. Our results also suggest that the geometries of fault intersection within the Sea of Marmara favor composite rupture of multiple oblique fault segments.  相似文献   

15.
Field investigations show that Plio-Quaternary Mexican and Quaternary Ecuadorian volcanic arcs are coeval with intra-arc transcurrent or transtensional tectonics with motions along faults parallel or subparallel to the arc. This relationship can also be observed in the Quaternary Kamchatka arc. These arcs have an anomalously wide distribution of volcanic centres which cannot be explained simply by a low dip in the subducting lithosphere. Comparison with the intra-arc tectonics and geometry of other Quaternary arcs reveals that strike-slip fault zones, parallel to the arc, favour magma rising in a broad surficial zone and may channel magma feeding mainly huge stratovolcanoes.  相似文献   

16.
Activation of major faults in Bulgaria and northern Greece presents significant seismic hazard because of their proximity to populated centers. The long recurrence intervals, of the order of several hundred years as suggested by previous investigations, imply that the twentieth century activation along the southern boundary of the sub-Balkan graben system, is probably associated with stress transfer among neighbouring faults or fault segments. Fault interaction is investigated through elastic stress transfer among strong main shocks (M ≥ 6.0), and in three cases their foreshocks, which ruptured distinct or adjacent normal fault segments. We compute stress perturbations caused by earthquake dislocations in a homogeneous half-space. The stress change calculations were performed for faults of strike, dip, and rake appropriate to the strong events. We explore the interaction between normal faults in the study area by resolving changes of Coulomb failure function (ΔCFF) since 1904 and hence the evolution of the stress field in the area during the last 100 years. Coulomb stress changes were calculated assuming that earthquakes can be modeled as static dislocations in an elastic half-space, and taking into account both the coseismic slip in strong earthquakes and the slow tectonic stress buildup associated with major fault segments. We evaluate if these stress changes brought a given strong earthquake closer to, or sent it farther from, failure. Our modeling results show that the generation of each strong event enhanced the Coulomb stress on along-strike neighbors and reduced the stress on parallel normal faults. We extend the stress calculations up to present and provide an assessment for future seismic hazard by identifying possible sites of impending strong earthquakes.  相似文献   

17.
The Cuzco region, which is located above a change in subduction geometry, appears to be characterized by a variable Plio-Quaternary tectono-sedimentary evolution essentially located along the major fault system that separates the High Plateaux from the Eastern Cordillera. After the higher surface formation of the High Plateaux, a set of Neogene basins were filled by Miocene “ fluvio-torrential” series and by Plio-Pleistocene fluvio-lacustrine deposits. The Neogene series have been affected by compressional tectonic forces attributed to the Late Miocene. This compression is followed by roughly E-W trending syn-sedimentary extensional tectonics attributed to the Pliocene; it is related to reactivation of the pre-existing major faults, basin evolution, and volcanic activity concentrated along the faults. In the Early Pleistocene, fluvio-lacustrine deposits are affected by syn- and post-sedimentary compressional tectonism it is characterized by shortening that trends both N-S and E-W and produces folding and faulting of the sedimentary cover. Extensional tectonism trending roughly N-S has been taking place from the Middle Pleistocene to the Present; it is coeval with shoshonitic volcanic activity, and with sedimentation of fluvio-lacustrine terraces, torrential fans and moraines. Quaternary and active normal faults due to this tectonism, are located in a narrow zone more than 100 km-long between the High Plateaux and the Eastern Cordillera, and two 15 km-long fault sectors in the Eastern Cordillera. Characteristic Pleistocene scarps, 400 m or more high, are due to the cumulative normal offset, and there are also little scarps, with heights ranging between 2 and 20 m, which are related to Holocene fault reactivations. Recent fault reactivation on the Cuzco fault system, during the April 5, 1986 earthquake (mb = 5.3), is due to the N-S trending extension. This state of stress, located at a mean elevation of roughly 3730 m, is generally homogeneous to different scales. The active Cuzco normal faults may be a consequence of adjustment between the compensated Western Cordillera and the undercompensated Eastern Cordillera, this latter being uplifted higher than its isostatic equilibrium due to compression acting on its eastern edge. The variation of the state of stress, during the Plio-Quaternary is in agreement with the variations of the compressional boundary forces. It may be explained by variation of the convergence rate or by the variation of pull-slab forces.  相似文献   

18.
广东省及邻区新生代以来构造运动与地震活动分区的研究   总被引：3，自引：0，他引：3  
综合分析多年来地震地质调查资料,将广东省及部分邻区划分为具不同构造活动特点的6个区,分别论述、分析这些区内新生代以来的断裂构造、火山喷发、第四纪沉积及地震活动等。结果认为,由断层样品热释光测定确定的断层最近期活动年龄主要是在中更新世和晚更新世,沿海地带主要为晚更新世和全新世。新生代以来构造具继承性活动的地区是地震最活动地区,如琼雷地区。同时,由于历史上发生过强震,地震后至今具较大速率下沉地区,在今后相当长时间内可能是不易发生强震地区,如琼北东部和南澎-南澳地区;Ms6级地震将主要发生在晚更新世以来的新生盆地,如潮汕盆地和近岸海湾地区;Ms5级地震在一定条件下,几乎可能发生在省内的任何地区。  相似文献   

19.
阿拉善地块东北缘的狼山地区新生代发育有3期构造,分别为中新世NW-SE向挤压形成的逆断层,NNE向挤压形成的左行走滑断层以及晚新生代NW-SE向伸展形成的高角度正断层。结合阿拉善地块东缘的新生代构造,认为狼山地区新生代断层的活动与青藏高原东北缘的逐步扩展、应力场逐渐调整有关。狼山山前正断层目前是一条贯通的断层,其演化基本符合恒定长度断层生长模型,断层中间部位滑动速率最大,向断层两侧逐渐递减。从不同方法得出的滑动速率来看,进入全新世以来,断层滑动速率有逐渐变小的趋势。结合阿拉善地块内部及东缘断层震源机制解以及断层的几何学、运动学特征,认为河套—吉兰泰盆地和银川盆地属于两个性质不同的伸展盆地,两者通过构造转换带相连,转换区内断层表现为右行走滑。转换区5级以上地震可能是受区域性NE-SW向挤压,近南北向右行断层活动的表现。  相似文献   

20.
Research for evaluation of geologic hazards involving earthquakes and volcanic eruptions in southern Argentina seems to have historically received little attention. Nevertheless, the relatively small work done indicates a Neogene tectonic architecture in the area with capability of generating potential hazardous earthquakes in a growing population region. Seismicity and some morphotectonic evidences of Quaternary activity of the Magallanes–Fagnano left‐lateral fault system in the transform boundary between South America and Scotia plates, are analysed in this paper. This fault system is considered to be an important seismogenic source, responsible for large earthquakes that have occurred in southern Argentina. Some examples from the South and Austral Andean Volcanic Zones are also examined in order to show recent volcanic activity which also generated crustal seismicity. Preliminary hazard estimation clearly shows the presence of both potentially active volcanic centres in southern Patagonia that may also trigger seismicity and the high probability for large crustal earthquake generation. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号