首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Exhumed basin margin‐scale clinothems provide important archives for understanding process interactions and reconstructing the physiography of sedimentary basins. However, studies of coeval shelf through slope to basin‐floor deposits are rarely documented, mainly due to outcrop or subsurface dataset limitations. Unit G from the Laingsburg depocentre (Karoo Basin, South Africa) is a rare example of a complete basin margin scale clinothem (>60 km long, 200 m‐high), with >10 km of depositional strike control, which allows a quasi‐3D study of a preserved shelf‐slope‐basin floor transition over a ca. 1,200 km2 area. Sand‐prone, wave‐influenced topset deposits close to the shelf‐edge rollover zone can be physically mapped down dip for ca. 10 km as they thicken and transition into heterolithic foreset/slope deposits. These deposits progressively fine and thin over tens of km farther down dip into sand‐starved bottomset/basin‐floor deposits. Only a few km along strike, the coeval foreset/slope deposits are bypass‐dominated with incisional features interpreted as minor slope conduits/gullies. The margin here is steeper, more channelized and records a stepped profile with evidence of sand‐filled intraslope topography, a preserved base‐of‐slope transition zone and sand‐rich bottomset/basin‐floor deposits. Unit G is interpreted as part of a composite depositional sequence that records a change in basin margin style from an underlying incised slope with large sand‐rich basin‐floor fans to an overlying accretion‐dominated shelf with limited sand supply to the slope and basin floor. The change in margin style is accompanied with decreased clinoform height/slope and increased shelf width. This is interpreted to reflect a transition in subsidence style from regional sag, driven by dynamic topography/inherited basement configuration, to early foreland basin flexural loading. Results of this study caution against reconstructing basin margin successions from partial datasets without accounting for temporal and spatial physiographic changes, with potential implications on predictive basin evolution models.  相似文献   

2.
The Permian Ecca Group of the Karoo Basin, South Africa preserves an extensive well-exposed siliciclastic basin floor, slope and shelf-edge delta succession. The Kookfontein Formation includes multiple sedimentary cycles that display clinoform geometries and are interpreted to represent the deposits of a slope to shelf succession. The succession exhibits progradational followed by aggradational stacking of deltaic cycles that is related to a change in shelf-edge trajectory, and lies within two depositional sequences. Sediment was transferred to the slope via overextension of deltas onto and over the shelf edge, resulting in failure and re-adjustment of local slope gradients. The depositional facies and architecture of the Kookfontein Formation record the change from a bypass- to accretion-dominated margin, which is interpreted to reflect a decrease in sediment transport efficiency as the slope gradient decreased, slope length increased and shelf-edge trajectory rose. During this time the delivery system changed from point-sourced basin-floor fans fed by slope channels to starved basin-floor with sand-rich slope clinoforms. This is an example of a progradational margin in which the younger slope system is interpreted to be of a different style to the older slope system that fed the underlying sand-rich basin floor fans.  相似文献   

3.
A synthesis has been undertaken based on regionally compiled data from the post early Eocene foreland basin succession of Svalbard. The aim has been to generate an updated depositional model and link this to controlling factors. The more than kilometer thick progradational succession includes the offshore shales of the Gilsonryggen Member of the Frysjaodden Formation, the shallow marine sandstones of the Battfjellet Formation and the predominantly heterolithic Aspelintoppen Formation, together recording the progressive eastwards infill of the foredeep flanking the West Spitsbergen fold‐and‐thrust belt. Here we present a summary of the paleo‐environmental depositional systems across the basin, their facies and regional distribution and link these together in an updated depositional model. The basin‐margin system prograded with an ascending shelf‐edge trajectory in the order of 1°. The basin fill was bipartite, with offset stacked shelf and shelf‐edge deltas, slope clinothems and basin floor fans in the western and deepest part and a simpler architecture of stacked shelf‐deltas in the shallower eastern part. We suggest a foredeep setting governed by flexural loading, likely influenced by buckling, and potentially developing into a wedge top basin in the mature stage of basin filling. High‐subsidence rates probably counteracted eustatic falls with the result that relative sea‐level falls were uncommon. Distance to the source terrain was small and sedimentation rates was temporarily high. Time‐equivalent deposits can be found outbound of Stappen High in the Vestbakken Volcanic Province and the Sørvestsnaget Basin 300 km further south on the Barents Shelf margin. We cannot see any direct evidence of coupling between these more southerly systems and the studied one; southerly diversion of the sediment‐routing, if any, may have taken place beyond the limit of the preserved deposits.  相似文献   

4.
Most slope-channel outcrop studies have been conducted at continental margin-scale on seismic data. However, in foreland and back-arc deepwater settings, sub-seismic scale slope channels hold equally important information on deepwater sediment delivery, often in hydrocarbon-bearing provinces. One such slope-channel system is examined in Lower Jurassic prograding shelf-margin clinoforms in Bey Malec Estancia, La Jardinera area, southern Neuquén Basin, Argentina. In a 4 km wide, 300 m tall, slightly oblique- to depositional-dip section of Jurassic Los Molles Formation deepwater slope deposits, seven clinoform timelines were identified by isolated slope-channel fills with thicknesses less than 50 m. Sedimentary logs, satellite images, a digital elevation model and drone photogrammetry were used to map variations in downslope channel geometry and infill facies. The slope channels are filled with sediment density flow deposits: poorly sorted conglomeratic debrites, structureless sandy high-density turbidites and well-sorted, fine-grained, graded low-density turbidites. The debrite portion decreases downslope, whereas high- and low-density turbidites increase. A grain-size analysis reveals a broad downslope fining trend of turbidite and debrite beds within slope channels with increasing water depth, and some notable bypass of conglomeratic facies to the lowermost slope channels and basin floor fans. The architecture of the slope channels changes from lateral to aggradational infill downstream. The Bey Malec clinoforms and its slope channels add new knowledge on downslope changes for sediment delivery in relatively shallow (<500 m water depth), prograding-dominant deepwater basins. They also highlight one of very few outcropping examples of oblique-type clinoforms.  相似文献   

5.
Injectites sourced from base‐of‐slope and basin‐floor parent sandbodies are rarely reported in comparison to submarine slope channel systems. This study utilizes the well‐constrained palaeogeographic and stratigraphic context of three outcrop examples exposed in the Karoo Basin, South Africa, to examine the relationship between abrupt stratigraphic pinchouts in basin‐floor lobe complexes, and the presence, controls, and character of injectite architecture. Injectites in this palaeogeographic setting occur where there is: (i) sealing mudstone both above and below the parent sand to create initial overpressure; (ii) an abrupt pinchout of a basin‐floor lobe complex through steep confinement to promote compaction drive; (iii) clean, proximal sand beds aiding fluidization; and (iv) a sharp contact between parent sand and host lithology generating a source point for hydraulic fracture and resultant injection of sand. In all outcrop cases, dykes are orientated perpendicular to palaeoslope, and the injected sand propagated laterally beneath the parent sand, paralleling the base to extend beyond its pinchout. Understanding the mechanisms that determine and drive injection is important in improving the prediction of the location and character of clastic injectites in the subsurface. Here, we highlight the close association of basin‐floor stratigraphic traps and sub‐seismic clastic injectites, and present a model to explain the presence and morphology of injectites in these locations.  相似文献   

6.
The Tombador Formation exhibits depositional sequence boundaries placed at the base of extensive amalgamated fluvial sand sheets or at the base of alluvial fan conglomeratic successions that indicate basinward shifts of facies. The hierarchy system that applies to the Tombador Formation includes sequences of different orders, which are defined as follows: sequences associated with a particular tectonic setting are designated as ‘first order’ and are separated by first‐order sequence boundaries where changes in the tectonic setting are recorded; second‐order sequences represent the major subdivisions of a first‐order sequence and reflect cycles of change in stratal stacking pattern observed at 102 m scales (i.e., 200–300 m); changes in stratal stacking pattern at 101 m scales indicate third‐order sequences (i.e., 40–70 m); and changes in stratal stacking pattern at 100 m scales are assigned to the fourth order (i.e., 8–12 m). Changes in palaeogeography due to relative sea level changes are recorded at all hierarchical levels, with a magnitude that increases with the hierarchical rank. Thus, the Tombador Formation corresponds to one‐first‐order sequence, representing a distinct intracratonic sag basin fill in the polycyclic history of the Espinhaço Supergroup in Chapada Diamantina Basin. An angular unconformity separates fluvial‐estuarine to alluvial fan deposits and marks the second‐order boundary. Below the angular unconformity the third‐order sequences record fluvial to estuarine deposition. In contrast, above the angular unconformity these sequences exhibit continental alluvial successions composed conglomerates overlain by fluvial and eolian strata. Fourth‐order sequences are recognized within third‐order transgressive systems tract, and they exhibit distinct facies associations depending on their occurrence at estuarine or fluvial domains. At the estuarine domain, they are composed of tidal channel, tidal bar and overlying shoreface heterolithic strata. At the fluvial domain the sequences are formed of fluvial deposits bounded by fine‐grained or tidal influenced intervals. Fine grained intervals are the most reliable to map in fourth‐order sequences because of their broad laterally extensive sheet‐like external geometry. Therefore, they constitute fourth‐order sequence boundaries that, at the reservoir approach, constitute the most important horizontal heterogeneity and, hence, the preferable boundaries of production zones. The criteria applied to assign sequence hierarchies in the Tombador Formation are based on rock attributes, are easy to apply, and can be used as a baseline for the study of sequence stratigraphy in Precambrian and Phanerozoic basins placed in similar tectonic settings.  相似文献   

7.
Unravelling early Cenozoic basin development in northern Tibetan Plateau remains crucial to understanding continental deformation mechanisms and to assessing models of plateau growth. We target coarse-grained red beds from the Cenozoic basal Lulehe Formation in the Qaidam basin by combining conglomerate clast compositions, paleocurrent determinations, sandstone petrography, heavy mineral analysis and detrital zircon U–Pb geochronology to characterize sediment provenance and the relationship between deformation and deposition. The red beds are dominated by matrix-supported, poorly sorted clastic rocks, implying low compositional and textural maturity and short transport distances. Although most sandstones have high (meta)sedimentary lithic fragment contents and abundant heavy minerals of metamorphic origin (e.g., garnet, epidote and chlorite), spatiotemporal differences in detrital compositions are evident. Detrital zircon grains mainly have Phanerozoic ages (210–280 Ma and 390–480 Ma), but Proterozoic ages (750–1000 Ma, 1700–2000 Ma and 2300–2500 Ma) are also prominent in some samples. Analysed strata display dissimilar (including south-, north- and west-directed) paleocurrent orientations. These results demonstrate that the Cenozoic basal deposits were derived from localized, spatially diverse sources with small drainage networks. We advocate that initial sedimentary filling in the northern Qaidam basin was fed by parent-rocks from the North Qaidam-South Qilian belts and the pre-Cenozoic basement within the Qaidam terrane interior, rather than southern distant Eastern Kunlun regions. Seismic and drilling well stratigraphic data indicate the presence of paleohighs and syn-sedimentary reverse faults and noteworthy diversity in sediment thickness of the Lulehe Formation, revealing that the Qaidam terrane exhibited as several isolated depocenters, rather than a coherent basin, in the early stage of the Cenozoic deposition. We suggest the Cenozoic Qaidam basin to have developed in a contractional deformation regime, which supports models with synchronous deformation throughout most of Tibet shortly after the India-Eurasia collision.  相似文献   

8.
The <1.5‐km thick Fiq Member of the Ghadir Manqil Formation, Huqf Supergroup, Oman, contains a succession of Marinoan‐age glacially and non‐glacially influenced deposits overlain by a transgressive, 13C‐depleted, deep‐water dolostone (Hadash Formation) that deepens up into the marine shales and siltstones of the Masirah Bay Formation. The Fiq Member and Hadash–Masirah Bay Formations are well exposed in the core of the Jebel Akhdar of northern Oman and provide a valuable insight into the processes operating during a Neoproterozoic glacial epoch and its aftermath. The Fiq Member comprises seven stratigraphic units (F1–F7) of proximal and distal glacimarine, non‐glacial sediment gravity flow, and non‐glacial shallow marine facies associations. These units can be correlated over almost the entire Neoproterozoic outcrop belt (ca. 80 km) of the Jebel Akhdar. Four units contain glacimarine rainout diamictites, commonly at the top of cycles beneath strong lithofacies dislocations suggesting flooding. The units are thought to have been generated by combined glacio‐isostatic and glacio‐eustatic forcing caused by changing volumes of terrestrial glacier ice. The lateral persistence and thickness of massive diamictite units increase upwards in the stratigraphy, the youngest (F7) diamictite being abruptly overlain by the Hadash Formation. Correlation of lithofacies associations across the rift basin and palaeocurrents indicate that siliciclastic sediment and glacially entrained debris were derived from both basin margins. Open‐water conditions existed during interglacials, attested to by the presence of wave‐rippled sandstones in the western part of the basin. The Hadash carbonate also exhibits variations between east and west, showing that despite an overall deep‐water depositional setting, rift margin and intrabasinal structure continued to exert a control on facies development during the post‐glacial aftermath. Onlap of basin margins continued through the deposition of the Masirah Bay Formation. The sedimentology and stratigraphy of the Fiq Member and Hadash–Masirah Bay Formations have a number of implications for the Snowball Earth hypothesis. The overall stratigraphic evolution of the Fiq Member suggests a dynamic, temperate/polythermal style of glaciation, perhaps nucleated on uplifted continental or rift margin topography, with marine‐terminating glaciers. Some transgressions coupled to deglaciations within the Fiq glacial epoch were accompanied by minor deposition of carbonate. However, final deglaciation triggered the deposition of a <8‐m thick, deep‐water dolomite contaminated with siliciclastics, with a lithofacies assemblage still reflecting the underlying bathymetric template, followed by relatively deep marine shales and siltstones. The preservation of relatively deep marine Masirah Bay sediments above the Fiq basin margin suggests either tectonic collapse of the rift shoulder or, more likely, rapid eustatic rise accompanying deglaciation.  相似文献   

9.
This article presents combined stratigraphic, sedimentological, subsidence and provenance data for the Cretaceous–Palaeogene succession from the Zhepure Mountain of southern Tibet. This region records the northernmost sedimentation of the Tethyan passive margin of India, and this time interval represents the transition into continental collision with Asia. The uppermost Cretaceous Zhepure Shanpo and Jidula formations record the transition from pelagic into upper slope to delta‐plain environments. The Palaeocene–lower Eocene Zongpu Formation records a carbonate ramp that is overlain by the deep‐water Enba Formation (lower Eocene). The upper part of the Enba Formation records shallowing into a storm‐influenced, outer shelf environment. Detrital zircon U–Pb and Hf isotopic data indicate that the terrigenous strata of the Enba Formation were sourced from the Lhasa terrane. Unconformably overlying the Enba Formation is the Zhaguo Formation comprising fluvial deposits with evidence of recycling from the underlying successions. Backstripped subsidence analysis indicates shallowing during latest Cretaceous‐earliest Palaeocene time (Zhepure Shanpo and Jidula formations) driven by basement uplift, followed by stability (Zongpu Formation) until early Eocene time (Enba Formation) when accelerated subsidence occurred. The provenance, subsidence and stratigraphy suggest that the Enba and Zhaguo formations record foredeep and wedge‐top sedimentation respectively within the early Himalayan foreland basin. The underlying Zongpu Formation is interpreted to record the accumulation of a carbonate ramp at the margin of a submarine forebulge. The precursor tectonic uplift during latest Cretaceous time could either record surface uplift over a mantle plume related to the Réunion hotspot, or an early signal of lithospheric flexure related to oceanic subduction, continental collision or ophiolite obduction. The results indicate that the collision of India with Asia occurred before late Danian (ca. 62 Ma) time.  相似文献   

10.
Important aspects of the Andean foreland basin in Argentina remain poorly constrained, such as the effect of deformation on deposition, in which foreland basin depozones Cenozoic sedimentary units were deposited, how sediment sources and drainages evolved in response to tectonics, and the thickness of sediment accumulation. Zircon U‐Pb geochronological data from Eocene–Pliocene sedimentary strata in the Eastern Cordillera of northwestern Argentina (Pucará–Angastaco and La Viña areas) provide an Eocene (ca. 38 Ma) maximum depositional age for the Quebrada de los Colorados Formation. Sedimentological and provenance data reveal a basin history that is best explained within the context of an evolving foreland basin system affected by inherited palaeotopography. The Quebrada de los Colorados Formation represents deposition in the distal to proximal foredeep depozone. Development of an angular unconformity at ca. 14 Ma and the coarse‐grained, proximal character of the overlying Angastaco Formation (lower to upper Miocene) suggest deposition in a wedge‐top depozone. Axial drainage during deposition of the Palo Pintado Formation (upper Miocene) suggests a fluvial‐lacustrine intramontane setting. By ca. 4 Ma, during deposition of the San Felipe Formation, the Angastaco area had become structurally isolated by the uplift of the Sierra de los Colorados Range to the east. Overall, the Eastern Cordillera sedimentary record is consistent with a continuous foreland basin system that migrated through the region from late Eocene through middle Miocene time. By middle Miocene time, the region lay within the topographically complex wedge‐top depozone, influenced by thick‐skinned deformation and re‐activation of Cretaceous rift structures. The association of the Eocene Quebrada del los Colorados Formation with a foredeep depozone implies that more distal foreland deposits should be represented by pre‐Eocene strata (Santa Barbara Subgroup) within the region.  相似文献   

11.
The Central Maine Basin is the largest expanse of deep‐marine, Upper Ordovician to Devonian metasedimentary rocks in the New England Appalachians, and is a key to the tectonics of the Acadian Orogeny. Detrital zircon ages are reported from two groups of strata: (1) the Quimby, Rangeley, Perry Mountain and Smalls Falls Formations, which were derived from inboard, northwesterly sources and are supposedly older; and (2) the Madrid, Carrabassett and Littleton Formations, which were derived from outboard, easterly sources and are supposedly younger. Deep‐water deposition prevailed throughout, with the provenance shift inferred to mark the onset of foredeep deposition and orogeny. The detrital zircon age distribution of a composite of the inboard‐derived units shows maxima at 988 and 429 Ma; a composite from the outboard‐derived units shows maxima at 1324, 1141, 957, 628, and 437 Ma. The inboard‐derived units have a greater proportion of zircons between 450 and 400 Ma. Three samples from the inboard‐derived group have youngest age maxima that are significantly younger than the nominal depositional ages. The outboard‐derived group does not share this problem. These results are consistent with the hypothesised provenance shift, but they signal potential problems with the established stratigraphy, structure, and (or) regional mapping. Shallow‐marine deposits of the Silurian to Devonian Ripogenus Formation, from northwest of the Central Maine Basin, yielded detrital zircons featuring a single age maximum at 441 Ma. These zircons were likely derived from a nearby magmatic arc now concealed by younger strata. Detrital zircons from the Tarratine Formation, part of the Acadian foreland‐basin succession in this strike belt, shows age maxima at 1615, 980 and 429 Ma. These results are consistent with three episodes of zircon recycling beginning with the deposition of inboard‐derived strata of the Central Maine Basin, which were shed from post‐Taconic highlands located to the northwest. Next, southeasterly parts of this succession were deformed in the Acadian orogeny, shedding detritus towards the northwest into what remained of the basin. Finally, by Pragian time, all strata in the Central Maine Basin had been deformed and detritus from this new source accumulated as the Tarratine Formation in a new incarnation of the foreland basin. Silurian‐Devonian strata from the Central Maine Basin have similar detrital zircon age distributions to coeval rocks from the Arctic Alaska and Farewell terranes of Alaska and the Northwestern terrane of Svalbard. We suggest that these strata were derived from different segments of the 6500‐km‐long Appalachian‐Caledonide orogen.  相似文献   

12.
Three successive zones of fault‐related folds disrupt the proximal part of the northern Tian Shan foreland in NW China. A new magnetostratigraphy of the Taxi He section on the north limb of the Tugulu anticline in the middle deformed zone clarifies the chronology of both tectonic deformation and depositional evolution of this collisional mountain belt. Our ～1200‐m‐thick section encompasses the upper Cenozoic terrigenous sequence within which ～300 sampling horizons yield an age span of ～8–2 Ma. Although the basal age in the Taxi He section of the Xiyu conglomerate (often cited as an indicator of initial deformation) is ～2.1 Ma, much earlier growth of the Tugulu anticline is inferred from growth strata dated at ～6.0 Ma. Folding of Neogene strata and angular unconformities in anticlines in the more proximal and distal deformed zones indicate deformation during Miocene and Early Pleistocene times, respectively. In the Taxi He area, sediment‐accumulation rates significantly accelerate at ～4 Ma, apparently in response to encroaching thrust loads. Together, growth strata, angular unconformities, and sediment‐accumulation rates document the northward migration of tectonic deformation into the northern Tian Shan foreland basin during the late Cenozoic. A progradational alluvial–lacustrine system associated with this northward progression is subdivided into two facies associations at Tugulu: a shallow lacustrine environment before ～5.9 Ma and an alluvial fan environment subsequently. The lithofacies progradation encompasses the time‐transgressive Xiyu conglomerate deposits, which should only be recognized as a lithostratigraphic unit. Along the length of the foreland, the locus of maximum shortening shifts between the medial and proximal zones of folding, whereas the total shortening across the foreland remains quite homogeneous along strike, suggesting spatially steady tectonic forcing since late Miocene times.  相似文献   

13.
A transition from supradetachment to rift basin signature is recorded in the ~1,500 m thick succession of continental to shallow marine conglomerates, mixed carbonate‐siliciclastic shallow marine sediments and carbonate ramp deposits preserved in the Bandar Jissah Basin, located southeast of Muscat in the Sultanate of Oman. During deposition, isostatically‐driven uplift rotated the underlying Banurama Detachment and basin fill ~45° before both were cut by the steep Wadi Kabir Fault as the basin progressed to a rift‐style bathymetry that controlled sedimentary facies belts and growth packages. The upper Paleocene to lower Eocene Jafnayn Formation was deposited in a supradetachment basin controlled by the Banurama Detachment. Alluvial fan conglomerates sourced from the Semail Ophiolite and the Saih Hatat window overlie the ophiolitic substrate and display sedimentary transport directions parallel to tectonic transport in the Banurama Detachment. The continental strata grade into braidplain, mouth bar, shoreface and carbonate ramp deposits. Subsequent detachment‐related folding of the basin during deposition of the Eocene Rusayl and lower Seeb formations marks the early transition towards a rift‐style basin setting. The folding, which caused drainage diversion and is affiliated with sedimentary growth packages, coincided with uplift‐isostasy as the Banurama Detachment was abandoned and the steeper Marina, Yiti Beach and Wadi Kabir faults were activated. The upper Seeb Formation records the late transition to rift‐style basin phase, with fault‐controlled sedimentary growth packages and facies distributions. A predominance of carbonates over siliciclastic sediments resulted from increasing near‐fault accommodation, complemented by reduced sedimentary input from upland catchments. Hence, facies distributions in the Bandar Jissah Basin reflect the progression from detachment to rift‐style tectonics, adding to the understanding of post‐orogenic extensional basin systems.  相似文献   

14.
Seismic-reflection data show that most deepwater (>200 m water depth) basins are filled by sand and mud dispersed across clinoformal geometries characterized by gently dipping topsets, steeper foresets and gently dipping bottomsets. However, the entire geometry of these ubiquitous clinoforms is not always recognized in outcrops. Sometimes the infill is erroneously interpreted as “layer cake” or “ramp” stratigraphy because the topset-foreset-bottomset clinoforms are not well exposed. Regional 2-D seismic lines show clinoforms in the Lower to Middle Jurassic Challaco, Lajas, and Los Molles formations in S. Neuquén Basin in Argentina. Time equivalent shelf, slope and basin-floor segments of clinoforms are exposed, and can be walked out in hundreds of metres thick and kilometres-wide outcrops. The studied margin-scale clinoforms are not representing a continental-margin but a deepwater shelf margin that built out in a back-arc basin. Lajas-Los Molles clinoforms have been outcrop-mapped by tracing mudstones interpreted as flooding surfaces on the shelf and abandonment surfaces (low sedimentation rate) in the deepwater basin. The downslope and lateral facies variability in the outcrops is also consistent with a clinoform interpretation. The Lajas topset (shelf) is dominated by fluvial and tidal deposits. The shelf-edge rollover zone is occasionally occupied by a 40–50-m-thick coarse-grained shelf-edge delta, sometimes incising into the underlying slope mudstones, producing oblique clinoforms expressing toplap erosion on seismic. A muddy transgressive phase capping the shelf-edge deltas contains tidal sandbodies. Shelf-edge deltas transition downslope into turbidite- and debris flow-filled channels that penetrate down the mud-prone Los Molles slope. At the base-of-slope, some 300m below the shelf edge, there are basin-floor fan deposits (>200 m thick) composed of sandy submarine-fan lobes separated by muddy abandonment intervals. The large-scale outcrop correlation between topset–foreset–bottomset allows facies and depositional interpretation and sets outcrop criteria recognition for each clinoform segment.  相似文献   

15.
《Basin Research》2018,30(5):1015-1041
Canyons and other sediment conduits are important components of the deep‐water environment and are the main pathways for sediment transport from the shelf to the basin floor. Using 3‐D and 2‐D seismic reflection data, seismic facies and statistical morphometric analyses, this study showed the architectural evolution of five canyons, two slide scars and four gullies on the southern part of the Loppa High, Barents Sea. Morphometric parameters such as thalweg depth (lowest point on a conduit's base), wall depth (middle point), height, width and base width, sinuosity, thalweg gradient, aspect ratio (width/height) and cross‐sectional area of the conduits were measured at intervals of 250‐m perpendicular to the conduits’ pathways. Our results show that the canyons and slide scars in the study area widen down slope, whereas the gullies are narrow and short with uniform widths. The sediment conduits in the study area evolved in three stages. The first stage is correlated with a time when erosion and bypass were dominant in the conduits, and sediment transferred to the basin in the south. The second stage occurred when basin subsidence was prevalent, and a widespread fine‐grained sequence was deposited as a drape blanketing the canyons and other conduits. A final stage occurred when uplift and glacial erosion configured the entire southern Loppa High into an area of denudation. Our work demonstrates that the morphometric parameters of the canyons, slide scars and gullies generally have increasing linear trends with down‐slope distance, irrespective of their geometries. The morphometric analysis of the sediment conduits in the study area has wider applications for understanding depositional processes, reservoir distribution and petroleum prospectivity in frontier basins.  相似文献   

16.
The western North China Craton (W-NCC) comprises the Alxa Terrane in the west and the Ordos Block in the east; they are separated by the Helanshan Tectonic Belt (HTB). There is an extensive debate regarding the significant Ordovician tectonic setting of the W-NCC. Most paleogeographic reconstructions emphasized the formation and rapid subsidence of an aulacogen along the HTB during the Middle–Late Ordovician, whereas paleomagnetic and geochronologic results suggested that the Alxa Terrane and the Ordos Block were independent blocks separated by the HTB. In this study, stratigraphic and geochronologic methods were used to constrain the Ordovician tectonic processes of the W-NCC. Stratigraphic correlations show that the Early Ordovician strata comprise ~500-m-thick tidal flat and lagoon carbonate successions with a progressive eastward onlap, featuring a west-deepening shallow-water carbonate shelf. In contrast, the Late Ordovician strata are composed of ~3,000-m-thick abyssal turbidites in the west and ~400-m-thick shallow-water carbonates in the east, defining an eastward-tapering basin architecture. Early Ordovician detrital zircons with ages of ~2,800–1,700 Ma were derived from the Ordos Block; the Late Ordovician turbidites were sourced from the western Alxa Terrane, based on zircon ages clustered at ~1,000–900 Ma. The petrographic modal composition and zircon age distribution imply a provenance shift from a stable craton to a recycled orogen in the Middle Ordovician. These shifts define a tectonic conversion from a passive continental margin to a foreland basin at ~467 Ma, resulting in the eastward progradation of the turbidite wedge around the HTB, the eastward backstepping of the carbonate platform in the east and the eastward expansion of orogenic thrusting in the western Alxa Terrane. This tectono-sedimentary shift coincided with the advancing subduction of the southern Paleo-Asian Ocean beneath the Alxa Terrane, generating the western Alxa continental arc and the paired retro-arc foredeep in the east under a compressional tectonic regime.  相似文献   

17.
The Ayn Formation of the Neoproterozoic Mirbat Group comprises <400 m of little‐deformed, glacially influenced basin margin deposits. These deposits are preserved in several palaeovalleys eroded in crystalline basement and overlain by a discontinuous cap carbonate. The Ayn Formation and the cap carbonate, which are superbly exposed along a 20 km SW–NE‐striking escarpment in south Oman, provide important insights into the processes operating on a basin margin during a Neoproterozoic glaciation and its demise. The Ayn Formation comprises units of glacimarine rain‐out diamictite and sediment gravity flow deposits, alternated with units of fluvial and deltaic sandstones and conglomerates, which may have formed by proglacial outwash. The stratigraphic evolution of the Ayn Formation indicates a highly active hydrological cycle during a phase of overall (glacio‐eustatic?) low stand when glaciers advanced into and receded upon bedrock valleys. The transgressive cap carbonate was deposited primarily in shallow marine or shallow lacustrine environments over palaeohighs during the deglaciation, and was partly reworked into deeper parts of the basin through sediment gravity flow processes. Locally, the cap carbonate transgresses over crystalline basement containing a network of fissures filled with carbonate originating from the cap. The δ13C isotopic composition of the cap carbonate varies systematically between ?3.5 and +5.8‰ Pee Dee Belemnite standard, in common with other older Cryogenian examples.  相似文献   

18.
The Western Irish Namurian Basin developed in Early Carboniferous times as a result of extension across the Shannon Lineament which probably coincides with the lapetus Suture. During the late Dinantian, axial areas of the NE-SW elongate trough became deep, whilst shallow-water limestones were deposited on the flanks. This bathymetry persisted into the Namurian when carbonate deposition ceased. In axial areas, a relatively thick mudstone succession spans earliest Namurian to Chokierian whilst on the northwestern marginal shelf, a thin, condensed Namurian mudstone sequence, in which pre-Chokierian sediments are apparently absent, rests unconformably on the Dinantian. From late Chokierian to early Kinderscoutian, the basin was filled by sand-dominated clastic sediments. Sand deposition began in the axial area with deposition of a thick turbidite sequence, the Ross Formation, which is largely equivalent to the condensed mudstone succession on the flanks. Turbidity currents flowed mainly axially towards the north-east and deposited a sequence lacking well-defined patterns of vertical bed-thickness change. Channels and slide sheets occur towards the top of the formation. The turbidite system seems to have lacked well-defined lobes and stable distributary channels. Overlying the Ross Formation, the Gull Island Formation shows a decreasing incidence of turbidite sandstones at the expense of increasing siltstones. This formation is characterized by major slides and slumps interbedded with undisturbed strata. In the flanking areas of the basin, the formation is thinner, has only a few turbidites in the sequence above the condensed mudstones and contains only one slide sheet. Overall the formation is interpreted as the deposit of a major prograding slope, the lower part representing a ramp upon which turbidites were deposited, the upper part a highly unstable muddy slope lacking any conspicuous feeder channels through which sand might have been transferred to deeper water. Progradation of the slope appears to have been increasingly from the northwestern flank of the trough which is similar to the direction deduced for the overlying deltaic Tullig cyclothem which completes the initial basin fill. Whilst several features of the succession can be explained by envisaging the whole sequence as the product of one linked depositional system, the shifting directions of palaeocurrents and palaeoslope raise problems. The switch from axial to lateral supply casts doubt on the strict application of Walther's Law to the total sequence and seems to demand large avulsive shifts of the delta system on the shelf area to the west.  相似文献   

19.
The Patagonian Magallanes retroarc foreland basin affords an excellent case study of sediment burial recycling within a thrust belt setting. We report combined detrital zircon U–Pb geochronology and (U–Th)/He thermochronology data and thermal modelling results that confirm delivery of both rapidly cooled, first‐cycle volcanogenic sediments from the Patagonian magmatic arc and recycled sediment from deeply buried and exhumed Cretaceous foredeep strata to the Cenozoic depocentre of the Patagonian Magallanes basin. We have quantified the magnitude of Eocene heating with thermal models that simultaneously forward model detrital zircon (U–Th)/He dates for best‐fit thermal histories. Our results indicate that 54–45 Ma burial of the Maastrichtian Dorotea Formation produced 164–180 °C conditions and heating to within the zircon He partial retention zone. Such deep burial is unusual for Andean foreland basins and may have resulted from combined effects of high basal heat flow and high sediment accumulation within a rapidly subsiding foredeep that was floored by basement weakened by previous Late Jurassic rifting. In this interpretation, Cenozoic thrust‐related deformation deeply eroded the Dorotea Formation from ca. 5 km burial depths and may be responsible for the development of a basin‐wide Palaeogene unconformity. Results from the Cenozoic Río Turbio and Santa Cruz formations confirm that they contain both Cenozoic first‐cycle zircon from the Patagonian magmatic arc and highly outgassed zircon recycled from older basin strata that experienced burial histories similar to those of the Dorotea Formation.  相似文献   

20.
Lacustrine deposits of the Malanzán Formation record sedimentation in a small and narrow mountain paleovalley. Lake Malanzán was one of several water bodies formed in the Paganzo Basin during the Late Carboniferous deglaciation. Five sedimentary facies have been recognized. Facies A (Dropstones-bearing laminated mudstones) records deposition from suspension fall-out and probably underflow currents coupled with ice-rafting processes in a basin lake setting. Facies B (Ripple cross-laminated sandstones and siltstones) was deposited from low density turbidity currents in a lobe fringe environment. Facies C (Massive or graded sandstones) is thought to represent sedimentation from high and low density turbidity currents in sand lobes. Facies D (Folded sandstones and siltstones) was formed from slumping in proximal lobe environments. Facies E (Wave-rippled sandstones) records wave reworking of sands supplied by turbidity currents above wave base level.The Lake Malanzán succession is formed by stacked turbidite sand lobe deposits. These lobes were probably formed in proximal lacustrine settings, most likely relatively high gradient slopes. Paleocurrents indicate a dominant direction from cratonic areas to the WSW. Although the overall sequence shows a regressive trend from basin fine-grained deposits to deltaic and braided fluvial facies, individual lobe packages lack of definite vertical trends in bed thickness and grain size. This fact suggests aggradation from multiple-point sources, rather than progradation from single-point sources. Sedimentologic and paleoecologic evidence indicate high depositional rate and sediment supply. Deposition within the lake was largely dominated by event sedimentation. Low diversity trace fossil assemblages of opportunistic invertebrates indicate recolonization of event beds under stressed conditions.Three stages of lake evolutionary history have been distinguished. The vertical replacement of braided fluvial deposits by basinal facies indicates high subsidence and a lacustrine transgressive episode. This flooding event was probably linked to a notable base level rise during postglacial times. The second evolutionary stage was typified by the formation of sand turbidite lobes from downslope mass-movements. Lake history culminates with the progradation of deltaic and braided fluvial systems  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号