共查询到20条相似文献，搜索用时 750 毫秒
1.
We have developed a practical approach for updating the velocity of PS converted waves based on the inverse normal‐moveout common‐image‐point gather obtained from prestack Kirchhoff time migration. We have integrated all the steps involved in updating the migration velocity model into an interactive tool and have applied this approach to a real seismic data set from the Alba Field in the North Sea. Based on experience in handling the real data, we discuss various practical aspects of updating the velocity model, including: what kind of initial velocity model should be used; which parameters in the velocity model should be updated; and how to update them. Application of prestack Kirchhoff time migration to the data set using the updated velocity model produces an improved image of the Alba Field. 相似文献
2.
The interpretation of stacked time sections can produce a correct geological image of the earth in cases when the stack represents a true zero-offset section. This assumption is not valid in the presence of conflicting dips or strong lateral velocity variations. We present a method for constructing a relatively accurate zero-offset section. We refer to this method as model-based stack (MBS), and it is based on the idea of stacking traces within CMP gathers along actual traveltime curves, and not along hyperbolic trajectories as it is done in a conventional stacking process. These theoretical curves are calculated for each CMP gather by tracing rays through a velocity-depth model. The last can be obtained using one of the methods for macromodel estimation. In this study we use the coherence inversion method for the estimation of the macromodel since it has the advantage of not requiring prestack traveltime picking. The MBS represents an accurate zero-offset section in cases where the estimated macromodel is correct. Using the velocity–depth macromodel, the structural inversion can be completed by post-stack depth migration of the MBS. 相似文献
3.
Tariq Alkhalifah 《Geophysical Prospecting》2005,53(5):643-653
Imaging pre‐salt reflections for data acquired from the coastal region of the Red Sea is a task that requires prestack migration velocity analysis. Conventional post‐stack time processing lacks the lateral inhomogeneity capability, necessary for such a problem. Prestack migration velocity analysis in the vertical time domain reduces the velocity–depth ambiguity that usually hampers the performance of prestack depth‐migration velocity analysis. In prestack τ‐migration velocity analysis, the interval velocity model and the output images are defined in τ (i.e. vertical time). As a result, we avoid placing reflectors at erroneous depths during the velocity analysis process and thus avoid inaccurately altering the shape of the velocity model, which in turn speeds up the convergence to the true model. Using a 1D velocity update scheme, the prestack τ‐migration velocity analysis produces good images of data from the Midyan region of the Red Sea. For the first seismic line from this region, only three prestack τ‐migration velocity analysis iterations were required to focus pre‐salt reflections in τ. However, the second line, which crosses the first line, is slightly more complicated and thus required five iterations to reach the final, reasonably focused, τ‐image. After mapping the images for the two crossing lines to depth, using the final velocity models, the placements of reflectors in the two 2D lines were consistent at their crossing point. Some errors occurred due to the influence of out‐of‐plane reflections on 2D imaging. However, such errors are identifiable and are generally small. 相似文献
4.
Velocity model updating in prestack Kirchhoff time migration for PS converted waves: Part I – Theory
A velocity model updating approach is developed based on moveout analysis of the diffraction curve of PS converted waves in prestack Kirchhoff time migration. The diffraction curve can be expressed as a product of two factors: one factor depending on the PS converted‐wave velocity only, and the other factor depending on all parameters. The velocity‐dependent factor represents the hyperbolic behaviour of the moveout and the other is a scale factor that represents the non‐hyperbolic behaviour of the moveout. This non‐hyperbolic behaviour of the moveout can be corrected in prestack Kirchhoff time migration to form an inverse normal‐moveout common‐image‐point gather in which only the hyperbolic moveout is retained. This hyperbolic moveout is the moveout that would be obtained in an isotropic equivalent medium. A hyperbolic velocity is then estimated from this gather by applying hyperbolic moveout analysis. Theoretical analysis shows that for any given initial velocity, the estimated hyperbolic velocity converges by an iterative procedure to the optimal velocity if the velocity ratio is optimal or to a value closer to the optimal velocity if the velocity ratio is not optimal. The velocity ratio (VP/VS) has little effect on the estimation of the velocity. Applying this technique to a synthetic seismic data set confirms the theoretical findings. This work provides a practical method to obtain the velocity model for prestack Kirchhoff time migration. 相似文献
5.
Martin Tygel Bjørn Ursin Einar Iversen Maarten V. de Hoop 《Geophysical Prospecting》2012,60(2):201-216
Starting from a given time‐migrated zero‐offset data volume and time‐migration velocity, recent literature has shown that it is possible to simultaneously trace image rays in depth and reconstruct the depth‐velocity model along them. This, in turn, allows image‐ray migration, namely to map time‐migrated reflections into depth by tracing the image ray until half of the reflection time is consumed. As known since the 1980s, image‐ray migration can be made more complete if, besides reflection time, also estimates of its first and second derivatives with respect to the time‐migration datum coordinates are available. Such information provides, in addition to the location and dip of the reflectors in depth, also an estimation of their curvature. The expressions explicitly relate geological dip and curvature to first and second derivatives of reflection time with respect to time‐migration datum coordinates. Such quantitative relationships can provide useful constraints for improved construction of reflectors at depth in the presence of uncertainty. Furthermore, the results of image‐ray migration can be used to verify and improve time‐migration algorithms and can therefore be considered complementary to those of normal‐ray migration. So far, image‐ray migration algorithms have been restricted to layered models with isotropic smooth velocities within the layers. Using the methodology of surface‐to‐surface paraxial matrices, we obtain a natural extension to smooth or layered anisotropic media. 相似文献
6.
叠前深度偏移已成为近年来地震偏移成像领域广泛应用的技术之一,其中复杂盐丘下方目标区域结构的成像始终是偏移成像中较难解决的问题.局部角度域波场分解可以提供在空间和方向上的双重局部化信息,因而这一技术被广泛地应用在方向照明分析、成像振幅校正等方面.本文在采用局部指数标架小波束进行角度域方向照明分析的基础上,研究采集系统对复杂盐丘下部层状结构成像质量的影响;同时通过分析目标区对应于相对地表采集系统分布的照明能量,确定叠前炮集数据中对盐下目标区成像起重要贡献的部分,并将这些数据用来对目标区成像,从而达到提高盐下结构成像质量的目的.本文将二维SEG-EAGE盐丘模型中盐下反射体作为目标区,分别计算其照明分析和由照明能量分布确定的炮集数据对目标区的偏移成像结果,同时通过与成像振幅校正前后的成像结果对比,说明了该方法对提高目标区结构成像质量的有效性. 相似文献
7.
Velocity analysis after migration 总被引：1，自引：0，他引：1
The double‐square‐root (DSR) equation used in pre‐stack migration is formulated in terms of velocity‐dependent and velocity‐independent terms. The velocity‐dependent term is shown to be the hyperbolic normal moveout (NMO) correction, whereas the velocity‐independent term is related to the recording geometry only. This separation of the velocity‐dependent term offers a means of applying vertical corrections to an initial migration velocity field. Using this concept, procedures are described both for velocity determination and for achieving improved structural imaging.
This decoupling is accurate both for constant‐velocity media and for media whose velocity varies as a function of depth. In media whose velocity varies as a function of both space and depth, a procedure is described for building velocity models through common‐image gather (CIG) stacking following prestack depth migration (PSDM) and time conversion (TC). This so‐called PSDM‐TC stack procedure provides a means of (a) incorporating both vertical and lateral velocity updates into an initial velocity model, (b) obtaining improved structural imaging by using a non‐optimal velocity model for the prestack depth migration, and (c) updating velocity by flattening CIGs and maximizing stack energy. The procedure can be applied to both P‐P wave and P‐SV wave migration. 相似文献
This decoupling is accurate both for constant‐velocity media and for media whose velocity varies as a function of depth. In media whose velocity varies as a function of both space and depth, a procedure is described for building velocity models through common‐image gather (CIG) stacking following prestack depth migration (PSDM) and time conversion (TC). This so‐called PSDM‐TC stack procedure provides a means of (a) incorporating both vertical and lateral velocity updates into an initial velocity model, (b) obtaining improved structural imaging by using a non‐optimal velocity model for the prestack depth migration, and (c) updating velocity by flattening CIGs and maximizing stack energy. The procedure can be applied to both P‐P wave and P‐SV wave migration. 相似文献
8.
像域层析速度建模方法利用偏移道集剩余曲率构建目标函数并迭代更新速度场.迭代更新速度场需反复进行叠前深度偏移,对于三维地震数据,偏移成像计算时间长,迭代更新过程成倍增加层析成像计算时间.本文由剩余时差拾取机理出发,提出隐式剩余时差概念,并建立隐式剩余时差与剩余速度之间的函数关系,利用该关系通过一次计算就可以对剩余速度进行精确求取并对速度模型进行精确更新,该方法避免了常规层析方法需要多次迭代的流程.由模型数据测试及实际数据应用证明,本文提出方法是有效可行的,该方法与常规层析方法进行比较,在保证提高层速度场建模精度的同时有效提高计算效率,为后续偏移成像节省大量时间. 相似文献
9.
10.
A 2D reflection tomographic method is described, for the purpose of estimating an improved macrovelocity field for prestack depth migration. An event-oriented local approach of the ‘layer-stripping’ type has been developed, where each input event is defined by its traveltime and a traveltime derivative, taken with respect to one of four coordinates in the source/receiver and midpoint half-offset systems. Recent work has shown that the results of reflection tomography may be improved by performing event picking in a prestack depth domain. We adopt this approach and allow events to be picked either before or after prestack depth migration. Hence, if events have been picked in a depth domain, such as the common-shot depth domain or the common-offset depth domain, then a depth-time transformation is required before velocity estimation. The event transformation may, for example, be done by conventional kinematic ray tracingr and with respect to the original depth-migration velocity field. By this means, we expect the input events for velocity updating to become less sensitive to migration velocity errors. For the purpose of velocity estimation, events are subdivided into two categories; reference horizon events and individual events. The reference horizon events correspond to a fixed offset in order to provide basic information about reflector geometry, whereas individual events, corresponding to any offset, are supposed to provide the additional information needed for velocity estimation. An iterative updating approach is used, based on calculation of derivatives of event reflection points with respect to velocity. The event reflection points are obtained by ray-theoretical depth conversion, and reflection-point derivatives are calculated accurately and efficiently from information pertaining to single rays. A number of reference horizon events and a single individual event constitute the minimum information required to update the velocity locally, and the iterations proceed until the individual event reflection point is consistent with those of the reference horizon events. Normally, three to four iterations are sufficient to attain convergence. As a by-product of the process, we obtain so-called uncertainty amplification factors, which relate a picking error to the corresponding error in the estimated velocity or depth horizon position. The vector formulation of the updating relationship makes it applicable to smooth horizons having arbitrary dips and by applying velocity updating in combination with a flexible model-builder, very general macro-model structures can be obtained. As a first step in the evaluation of the new method, error-free traveltime events were generated by applying forward ray tracing within given macrovelocity models. When using such ‘perfect’ observations, the velocity estimation algorithm gave consistent reconstructions of macro-models containing interfaces with differential dip and curvature, a low-velocity layer and a layer with a laterally varying velocity function. 相似文献
11.
HUUB P. G. M. DEN ROOIJEN 《Geophysical Prospecting》1991,39(5):585-598
The moveout of P-SV mode-converted seismic reflection events in a common-midpoint gather is non-hyperbolic. This is true even if the medium has constant P- and SV-wave velocities. Furthermore, reflection-point smear occurs even along horizontal reflectors. These effects reduce the resolution of the zero-offset stack. In such a medium, the generalization of the dip moveout transformation to P-SV data can be calculated analytically. The resulting P-SV dip moveout operators solve the problem of reflection-point smear, and image any reflector regardless of dip or depth. The viability of this technique is demonstrated on synthetic and field data. 相似文献
12.
Pre-stack depth migration velocity analysis is one of the key techniques influencing image quality. As for areas with a rugged surface and complex subsurface, conventional prestack depth migration velocity analysis corrects the rugged surface to a known datum or designed surface velocity model on which to perform migration and update the velocity. We propose a rugged surface tomographic velocity inversion method based on angle-domain common image gathers by which the velocity field can be updated directly from the rugged surface without static correction for pre-stack data and improve inversion precision and efficiency. First, we introduce a method to acquire angle-domain common image gathers (ADCIGs) in rugged surface areas and then perform rugged surface tomographic velocity inversion. Tests with model and field data prove the method to be correct and effective. 相似文献
13.
The image‐wave equation for depth remigration is a partial differential equation that is similar to the acoustic wave equation. In this work, we study its finite‐difference solution and possible applications. The conditions for stability, dispersion and dissipation exhibit a strong wavenumber dependence. Where higher horizontal than vertical wavenumbers are present in the data to be remigrated, stability may be difficult to achieve. Grid dispersion and dissipation can only be reduced to acceptable levels by the choice of very small grid intervals. Numerical tests demonstrate that, upon reaching the true medium velocity, remigrated images of curved reflectors propagate to the correct depth and those of diffractions collapse to single points. The latter property points towards the method's potential for use as a tool for migration velocity analysis. A first application to inhomogeneous media shows that in a horizontally layered medium, the reflector images reach their true depth when the remigration velocity equals the inverse of the mean medium slowness. 相似文献
14.
15.
Moshe Reshef 《Geophysical Prospecting》2014,62(6):1453-1467
We present an innovative approach for seismic image enhancement using multi‐parameter angle‐domain characterization of common image gathers. A special subsurface angle‐domain imaging system is used to generate the multi‐parameter common image gathers in a summation‐free image space. The imaged data associated with each common image gathers depth point contain direction‐dependent opening‐angle image contributions from all the available incident and scattered wave‐pairs at this point. Each direction‐dependent opening‐angle data can be differently weighted according to its coherency measure. Once the optimal migration velocity is used, it is assumed that in the actual specular direction, the coherency measure (semblance) along reflection events, from all available opening angles and opening azimuths, is larger than that along non‐specular directions. The computed direction‐dependent semblance attribute is designed to operate as an imaging filter which enhances specular migration contributions and suppresses all others in the final migration image. The ability to analyse the structural properties of the image points by the multi‐parameter common image gather allows us to better handle cases of complicated wave propagation and to improve the image quality at poorly illuminated regions or near complex structures. The proposed method and some of its practical benefits are demonstrated through detailed analysis of synthetic and real data examples. 相似文献
16.
Seismic velocity analysis in the scattering-angle/azimuth domain 总被引：2，自引：0，他引：2
Migration velocity analysis is carried out by analysing the residual moveout and amplitude variations in common image point gathers (CIGs) parametrized by scattering angle and azimuth. The misfit criterion in the analysis is of the differential-semblance type. By using angles to parametrize the imaging we are able to handle and exploit data with multiple arrivals, although artefacts may occur in the CIGs and need to be suppressed. The CIGs are generated by angle migration, an approach based on the generalized Radon transform (GRT) inversion, and they provide multiple images of reflectors in the subsurface for a range of scattering angles and azimuths. Within the differential semblance applied to these CIGs, we compensate for amplitude versus angle (AVA) effects. Thus, using a correct background velocity model, the CIGs should have no residual moveout nor amplitude variation with angles, and the differential semblance should vanish. If the velocity model is incorrect, however, the events in the CIGs will appear at different depths for different angles and the amplitude along the events will be non-uniform. A standard, gradient-based optimization scheme is employed to develop a velocity updating procedure. The model update is formed by backprojecting the differential semblance misfits through ray perturbation kernels, within a GRT inverse. The GRT inverse acts on the data, subject to a shift in accordance with ray perturbation theory. The performance of our algorithm is demonstrated with two synthetic data examples using isotropic elastic models. The first one allows velocity variation with depth only. In the second one, we reconstruct a low-velocity lens in the model that gives rise to multipathing. The velocity model parametrization is based upon the eigentensor decomposition of the stiffness tensor and makes use of B-splines. 相似文献
17.
Wave‐equation migration velocity analysis is a technique designed to extract and update velocity information from migrated images. The velocity model is updated through the process of optimizing the coherence of images migrated with the known background velocity model. The capacity for handling multi‐pathing of the technique makes it appropriate in complex subsurface regions characterized by strong velocity variation. Wave‐equation migration velocity analysis operates by establishing a linear relation between a slowness perturbation and a corresponding image perturbation. The linear relationship and the corresponding linearized operator are derived from conventional extrapolation operators and the linearized operator inherits the main properties of frequency‐domain wavefield extrapolation. A key step in the implementation is to design an appropriate procedure for constructing an image perturbation relative to a reference image that represents the difference between the current image and a true, or more correct image of the subsurface geology. The target of the inversion is to minimize such an image perturbation by optimizing the velocity model. Using time‐shift common‐image gathers, one can characterize the imperfections of migrated images by defining the focusing error as the shift of the focus of reflections along the time‐shift axis. The focusing error is then transformed into an image perturbation by focusing analysis under the linear approximation. As the focusing error is caused by the incorrect velocity model, the resulting image perturbation can be considered as a mapping of the velocity model error in the image space. Such an approach for constructing the image perturbation is computationally efficient and simple to implement. The technique also provides a new alternative for using focusing information in wavefield‐based velocity model building. Synthetic examples demonstrate the successful application of our method to a layered model and a subsalt velocity update problem. 相似文献
18.
Vincenzo Lipari Domenico Urbano Emmanuel Spadavecchia Jacopo Panizzardi Nicola Bienati 《Geophysical Prospecting》2017,65(1):305-315
Reflection tomography is the industry standard tool for velocity model building, but it is also an ill‐posed inverse problem as its solution is not unique. The usual way to obtain an acceptable result is to regularize tomography by feeding the inversion with some a priori information. The simplest regularization forces the solution to be smooth, implicitly assuming that seismic velocity exhibits some degree of spatial correlation. However, velocity is a rock property; thus, the geometry and structure of rock formations should drive correlation in velocity depth models. This observation calls for constraints driven by geological models. In this work, we present a set of structural constraints that feed reflection tomography with geometrical information. These constraints impose the desired characteristics (flatness, shape, position, etc.) on imaged reflectors but act on the velocity update. Failure to respect the constraints indicates either velocity inaccuracies or wrong assumptions concerning the constraints. Reflection tomography with structural constraints is a flexible framework that can be specialized in order to achieve different goals: among others, to flatten the base of salt bodies or detachment surfaces, to recover the horizontalness of oil–water contacts, or to impose the co‐location of the same imaged horizon between PP and PS images. The straightforward application of structural constraints is that of regularizing tomography through geological information, particularly at the latest stages of the depth imaging workflow, when the depth migration structural setting reached a consistent geological interpretation. Structural constraints are also useful in minimizing the well‐to‐seismic mis‐ties. Moreover, they can be used as a tool to check the consistency of interpreters' hypothesis with seismic data. Indeed, inversion with structural constraints will preserve image focusing only if the interpreters' insights are consistent with the data. Results from synthetic and real data demonstrate the effectiveness of reflection tomography with structural constraints. 相似文献
19.
叠前深度偏移的成像效果对偏移速度场相当敏感，建立正确的偏移速度场是实现高质量叠前深度偏移成像的关键。首先应用成像精度高的波动方程法叠前深度偏移抽取共成像点道集；然后基于摄动法通过参数化速度函数和改进的剩余曲率分析建立偏移速度误差和成像深度误差的定量关系；最后采用单参数／多参数联合迭代反演实现偏移速度建模。对Marmousi模型的试算结果表明：该方法对复杂地质体具有较强的适应性和较好的建模和成像效果，一般只需分析和控制主要反射层，通过3－4次近代就可以满足精度要求。 相似文献
20.
Paul Docherty Ron Silva Satish Singh Zhong-Min Song Margaret Wood 《Geophysical Prospecting》1997,45(5):865-878
Migration velocity analysis, a method for determining long wavelength velocity structure, is a critical step in prestack imaging. Solution of this inverse problem is made difficult by a multimodal objective function; a parameter space often vast in extent; and an evaluation procedure for candidate solutions, involving the calculation of depth-migrated image gathers, that can be prohibitively expensive. Recognizing the global nature of the problem, we employ a genetic algorithm (GA) in the search for the optimum velocity model. In order to describe a model efficiently, regions of smooth variation are identified and sparsely parametrized. Region boundaries are obtained via map migration of events picked on the zero-offset time section. Within a region, which may contain several reflectors, separate components describe long and short wavelength variations, eliminating from the parameter space, models with large velocity fluctuations. Vital to the success of the method is rapid model evaluation, achieved by generating image gathers only in the neighbourhood of specific reflectors. Probability of a model, which we seek to maximize, is derived from the flatness of imaged events. Except for an initial interpretation of the zero-offset time section, our method is automatic in that it requires no picking of residual moveout on migrated gathers. Using an example data set from the North Sea, we show that it is feasible to solve for all velocity parameters in the model simultaneously: the method is global in this respect also. 相似文献