首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 515 毫秒
1.
A revised magnitude scaling factor (MSF) relationship for CPT-based and SPT-based liquefaction triggering analyses is presented in this paper. The revised MSF relationship incorporates functional dependency on the soil characteristics [represented by clean sand equivalent penetration resistances in the present form] as well as on earthquake magnitude. The revisions in MSF are based on the examination of cyclic testing results for a broad range of soil types and densities, analyses of strong ground motion records to develop relationships for the equivalent number of loading cycles for different soil properties, and the synthesis of those results into an MSF relationship suitable for implementation in practice. A separate study [2] showed that use of the revised MSF relationship in CPT-based and SPT-based liquefaction triggering procedures is well-supported by the case history databases. Other factors known to fundamentally influence the MSF are discussed.  相似文献   

2.
Through an energy approach, a model is proposed to predict the cyclic liquefaction strength of saturated sands in terms of their static shear strengths. Plots of cyclic liquefaction strength versus relative density and also versus modified standard penetration resistance are presented for various uniformity coefficients and different numbers of stress cycles. The predicted cyclic liquefaction strength values are converted to cyclic stress ratios and compare favourably with Seed's empirical correlations.  相似文献   

3.
In this paper, known simplified methods for the assessment of soil liquefaction are summarized. Their discrepancies are examined. Using the Chi-Chi earthquake data as well as other reported data, a set of three critical cyclic strength curves were obtained by finding the minimum of misclassified points. The functional forms of these three curves are an exponential function, a hyperbola, and a cubic polynomial. A lower bound critical cyclic strength curve is then established. This curve may have important applications in practice for liquefaction-related designs. Through this case study, it was found that a minimum cyclic strength CSRlim may exist at a very low value of (N1)60. An upper limit (N1)60upp also exists beyond which liquefaction may not occur. Furthermore, current simplified methods seem suitable only for a limited range of N values and fines content, and may fail for general applications. The lower bound curve proposed in this paper may provide an alternative approach for improvement. Since the explicit functional form and the statistical indices are available, the statistically regressed curves seem to have a benefit in that it may be used directly to conduct hazard analysis, and evaluate the uncertainty within the critical cyclic strength curves.  相似文献   

4.
Shear wave velocity (Vs) measurements from seismic piezocone penetration (SCPTU) soundings have been increasingly used for site characterization and liquefaction potential assessments. Several sites in Tangshan region, China liquefied during the Tangshan earthquake, Mw=7.8 in 1976 and these sites were characterized recently using the SCPTU device. Other sites in the same region where liquefaction was not observed are also included in the present field investigations. Three liquefaction assessment models-based on measured shear wave velocity, shear modulus and tip resistance parameters of SCPTU are evaluated in this paper for their accurate predictions of liquefaction or non-liquefaction at the test sites. Analyses showed that the shear wave velocity—liquefaction resistance model with normalized overburden vertical stress have yielded a success rate of 78% in predicting liquefied site cases and another similar approach with mean stress based normalization has a success rate of 67%. The correlation of qc/Go-CRR7.5 based on geological age has correctly assessed the liquefaction potential at most sites considered in this research. Overall, all three models based on shear wave velocity, shear modulus and cone tip resistance are proven valuable in the assessments of liquefaction at the present test sites in the Tangshan region.  相似文献   

5.
Seismic monitoring of reservoir and overburden performance during subsurface CO2 storage plays a key role in ensuring efficiency and safety. Proper interpretation of monitoring data requires knowledge about the rock physical phenomena occurring in the subsurface formations. This work focuses on rock stiffness and elastic velocity changes of a shale overburden formation caused by both reservoir inflation induced stress changes and leakage of CO2 into the overburden. In laboratory experiments, Pierre shale I core plugs were loaded along the stress path representative for the in situ stress changes experienced by caprock during reservoir inflation. Tests were carried out in a triaxial compaction cell combining three measurement techniques and permitting for determination of (i) ultrasonic velocities, (ii) quasistatic rock deformations, and (iii) dynamic elastic stiffness at seismic frequencies within a single test, which allowed to quantify effects of seismic dispersion. In addition, fluid substitution effects connected with possible CO2 leakage into the caprock formation were modelled by the modified anisotropic Gassmann model. Results of this work indicate that (i) stress sensitivity of Pierre shale I is frequency dependent; (ii) reservoir inflation leads to the increase of the overburden Young's modulus and Poisson's ratio; (iii) in situ stress changes mostly affect the P‐wave velocities; (iv) small leakage of the CO2 into the overburden may lead to the velocity changes, which are comparable with one associated with geomechanical influence; (v) non‐elastic effects increase stress sensitivity of an acoustic waves; (iv) and both geomechanical and fluid substitution effects would create significant time shifts, which should be detectable by time‐lapse seismic.  相似文献   

6.
Contrary to many laboratory investigations, common empirical correlations from in situ tests consider that the increase in the percentage of fines leads to an increase of the cyclic liquefaction resistance of sands. This paper draws upon the integrated Critical State Soil Mechanics framework in order to study this seemingly not univocal effect. Firstly the effect of fines on the Critical State Line (CSL) is studied through a statistical analysis of a large data set of published monotonic triaxial tests. The results show that increasing the content of non-plastic fines practically leads to a clockwise rotation of the CSL in (e–ln p) space. The implication of this effect on cyclic liquefaction resistance is subsequently evaluated with the aid of a properly calibrated critical state elasto-plastic constitutive model, as well as a large number of published experimental results and in situ empirical correlations. Both sets of data show clearly that a fines content, less than about 30% by weight, may prove beneficial at relatively small effective stresses (p0<50–70 kPa), such as the in situ stresses prevailing in most liquefaction case studies, and detrimental at larger confining stresses, i.e. the stresses usually considered in laboratory tests. To the extent of these findings, a correction factor is proposed for the practical evaluation of liquefaction resistance in terms of the fines content and the mean effective confining stress.  相似文献   

7.
The application of the simplified method for evaluating the liquefaction potential based on shear wave velocity measurements has increased substantially due to its advantages, especially for microzonation of liquefaction potential. In the simplified method, a curve is proposed to correlate the cyclic resistance ratio (CRR) with overburden stress-corrected shear wave velocity (Vs1). However, the uniqueness of this curve for all types of soils is questionable. The objective of this research is to study whether the correlation between CRR and Vs1 is unique or not. Besides, the necessity of developing the soil-specific correlations is also investigated. Based on laboratory test data, a new semi-empirical method is proposed to establish the soil-specific CRR–Vs1 correlation. To validate the proposed method, a number of undrained cyclic triaxial tests along with bender element tests were performed on two types of sands. Similar experimental data for six other types of sands reported in the literature was also compiled. Applying the proposed method, soil-specific CRR–Vs1 correlation curves were developed for these eight types of sands. It is shown that the correlation is not unique for different types of sands and the boundary curve proposed in the available simplified method can only be used as an initial estimation of liquefaction resistance. Finally, using the results of this study as well as previous ones, a chart is suggested to be used in engineering practice showing the conditions for which a detailed soil-specific CRR–Vs1 correlation study needs to be performed.  相似文献   

8.
目前,主要依靠室内动力试验对黄土液化势进行评价。由于黄土特殊的结构性,室内试验对其饱和的过程较为复杂,且与实际场地饱和黄土差异明显,导致室内黄土液化试验结果并不能代表现场饱和黄土的抗液化强度。本文选取兰州市西固区寺儿沟村某饱和黄土场地进行钻孔测试,现场实施了标准贯入试验、静力触探试验以及剪切波速测试。应用Robertson的土类指数分类图对该场地不同含水率黄土的土类进行了界定,确定了饱和黄土属于类砂土,有液化势。应用NCEER推荐方法,计算了3组原位试验数据的饱和黄土循环抗力比（CRR）,通过与1976年唐山地震和1999年集集地震液化土CRR对比,得出了饱和黄土抗液化强度很低的结论。  相似文献   

9.
Flow liquefaction and cyclic mobility are two different phenomena that are encountered during strong earthquakes. Flow liquefaction is associated with the contractive behavior of loose granular materials and cyclic mobility is associated with the dilative response of both loose and dense granular materials at low confining stresses. These two types of response pertain to the same material and therefore should be modeled in a consistent manner. Whether a soil in a given state exhibits contractive or dilative behavior is dependent on its dilatancy, d=dvp/dqp. A form of the dilatancy d=d(η,ψ,C) is proposed, where η=q/p is the stress ratio, and ψ and C denote the internal state variables and the intrinsic properties, respectively. It has been shown that such a state-dependent dilatancy is effective in describing both the contractive and dilative behavior. This allows the soil behavior associated with flow liquefaction and cyclic mobility during earthquakes to be modeled in a unified way.  相似文献   

10.
The liquefaction behavior and cyclic resistance ratio (CRR) of reconstituted samples of non-plastic silt and sandy silts with 50% and 75% silt content are examined using constant-volume cyclic and monotonic ring shear tests along with bender element shear wave velocity (Vs) measurements. Liquefaction occurred at excess pore water pressure ratios (ru) between 0.6 and 0.7 associated with cumulative cyclic shear strains (γ) of 4% to 7%, after which cyclic liquefaction ensued with very large shear strains and excess pore water pressure ratio (ru>0.8). The cyclic ring shear tests demonstrate that cyclic resistance ratio of silt and sandy silts decreases with increasing void ratio, or with decreasing silt content at a certain void ratio. The results also show good agreement with those from cyclic direct simple shear tests on silts and sandy silts. A unique correlation is developed for estimating CRR of silts and sandy silts (with more than 50% silt content) from stress-normalized shear wave velocity measurements (Vs1) with negligible effect of silt content. The results indicate that the existing CRR–Vs1 correlations would underestimate the liquefaction resistance of silts and sandy silt soils.  相似文献   

11.

In engineering practice, the liquefaction potential of a sandy soil is usually evaluated with a semi-empirical, stress-based approach computing a factor of safety in free field conditions, defined as the ratio between the liquefaction resistance (capacity) and the seismic demand. By so doing, an estimate of liquefaction potential is obtained, but nothing is known on the pore pressure increments (often expressed in the form of normalized pore pressure ratio ru) generated by the seismic action when the safety factor is higher than 1. Even though ru can be estimated using complex numerical analyses, it would be extremely useful to have a simplified procedure to estimate them consistent with the stress-based approach adopted to check the safety conditions. This paper proposes such a procedure with reference to both saturated and unsaturated soils, considering the latter as soils for which partial saturation has been artificially generated with some ground improvement technology to increase cyclic strength and thus tackle liquefaction risk. A simple relationship between the liquefaction free field safety factor FS, and ru(Sr) is introduced, that generalizes a previous expression proposed by Chiaradonna and Flora (Geotech Lett, 2020. https://doi.org/10.1680/jgele.19.00032) for saturated soils. The new procedure has been successfully verified against some experimental data, coming from laboratory constant amplitude cyclic tests and from centrifuge tests with irregular acceleration time histories for soils having different gradings and densities.

  相似文献   

12.
The evaluation and design of stone column improvement ground for liquefaction mitigation is a challenging issue for the state of practice. In this paper, a shear wave velocity-based approach is proposed based on the well-defined correlations of liquefaction resistance (CRR)-shear wave velocity (V s)-void ratio (e) of sandy soils, and the values of parameters in this approach are recommended for preliminary design purpose when site specific values are not available. The detailed procedures of pre- and post-improvement liquefaction evaluations and stone column design are given. According to this approach, the required level of ground improvement will be met once the target V s of soil is raised high enough (i.e., no less than the critical velocity) to resist the given earthquake loading according to the CRR-V s relationship, and then this requirement is transferred to the control of target void ratio (i.e., the critical e) according to the V s-e relationship. As this approach relies on the densification of the surrounding soil instead of the whole improved ground and is conservative by nature, specific considerations of the densification mechanism and effect are given, and the effects of drainage and reinforcement of stone columns are also discussed. A case study of a thermal power plant in Indonesia is introduced, where the effectiveness of stone column improved ground was evaluated by the proposed V s-based method and compared with the SPT-based evaluation. This improved ground performed well and experienced no liquefaction during subsequent strong earthquakes.  相似文献   

13.
The seismic performance of four pile‐supported models is studied for two conditions: (i) transient to full liquefaction condition, i.e. the phase when excess pore pressure gradually increases during the shaking; (ii) full liquefaction condition, i.e. defined as the state where the seismically induced excess pore pressure equalises to the overburden stress. The paper describes two complementary analyses consisting of an experimental investigation, carried out at normal gravity on a shaking table, and a simplified numerical analysis, whereby the soil–structure interaction (SSI) is modelled through non‐linear Winkler springs (commonly known as p–y curves). The effects of liquefaction on the SSI are taken into account by reducing strength and stiffness of the non‐liquefied p–y curves by a factor widely known as p‐multiplier and by using a new set of p–y curves. The seismic performance of each of the four models is evaluated by considering two different criteria: (i) strength criterion expressed in terms of bending moment envelopes along the piles; (ii) damage criterion expressed in terms of maximum global displacement. Comparison between experimental results and numerical predictions shows that the proposed p–y curves have the advantage of better predicting the redistribution of bending moments at deeper elevations as the soil liquefies. Furthermore, the proposed method predicts with reasonable accuracy the displacement demand exhibited by the models at the full liquefaction condition. However, disparities between computed and experimental maximum bending moments (in both transient and full liquefaction conditions) and displacement demands (during transient to liquefaction condition) highlight the need for further studies. Copyright © 2016 The Authors Earthquake Engineering & Structural Dynamics Published by John Wiley & Sons Ltd.  相似文献   

14.
Gravelly soil is generally recognized to have no liquefaction potential. However, liquefaction cases were reported in central Taiwan in the 1999 Chi-Chi Taiwan earthquake and in the 1988 Armenia earthquake. Thus, further studies on the liquefaction potential of gravelly soil are warranted. Because large particles can impede the penetration of both standard penetration test and cone penetration test, shear wave velocity-based correlations and large hammer penetration tests (LPT) are employed to evaluate the liquefaction resistance of gravelly soils. A liquefied gravelly deposit site during the Chi-Chi earthquake was selected for this research. In situ physical properties of soil deposits were collected from exploratory trenches. Instrumented LPT and shear wave velocity (Vs) measurements were performed to evaluate the liquefaction resistance. In addition, large-scale cyclic triaxial tests on remolded gravelly soil samples (15 cm in diameter, 30 cm in height) were conducted to verify and improve LPT-based and Vs-based correlations. The results show that the LPT and shear wave velocity methods are reasonably suitable for liquefaction assessment of gravelly soils.  相似文献   

15.
This paper is a systematic effort to clarify why field liquefaction charts based on Seed and Idriss׳ Simplified Procedure work so well. This is a necessary step toward integrating the states of the art (SOA) and practice (SOP) for evaluating liquefaction and its effects. The SOA relies mostly on laboratory measurements and correlations with void ratio and relative density of the sand. The SOP is based on field measurements of penetration resistance and shear wave velocity coupled with empirical or semi-empirical correlations. This gap slows down further progress in both SOP and SOA. The paper accomplishes its objective through: a literature review of relevant aspects of the SOA including factors influencing threshold shear strain and pore pressure buildup during cyclic strain-controlled tests; a discussion of factors influencing field penetration resistance and shear wave velocity; and a discussion of the meaning of the curves in the liquefaction charts separating liquefaction from no liquefaction, helped by recent full-scale and centrifuge results. It is concluded that the charts are curves of constant cyclic strain at the lower end (Vs1<160 m/s), with this strain being about 0.03–0.05% for earthquake magnitude, Mw≈7. It is also concluded, in a more speculative way, that the curves at the upper end probably correspond to a variable increasing cyclic strain and Ko, with this upper end controlled by overconsolidated and preshaken sands, and with cyclic strains needed to cause liquefaction being as high as 0.1–0.3%. These conclusions are validated by application to case histories corresponding to Mw≈7, mostly in the San Francisco Bay Area of California during the 1989 Loma Prieta earthquake.  相似文献   

16.
According to the results of cyclic triaxial tests, a linear correlation is presented between liquefaction resistance and elastic shear modulus, which shows the relation of G max (kPa) with (σd/2)1/2(kPa)1/2. When applied to soils from different sites, the correlation can be normalized in reference to its minimum void ratio (e min). Accordingly, an improved method is established to evaluate the liquefaction potential with shear-wave velocity. The critical shear-wave velocity of liquefaction is in linear relation with 1/4 power of depth and the maximum acceleration during earthquakes, which can be used to explain the phenomenon that the possibility of liquefaction decreases with the increment of the depth. Compared with previous methods this method turns out simple and effective, which is also verified by the results of cyclic triaxial tests. Foundation item: State Natural Science Foundation (59678020) and Natural Science Foundation of Zhejiang Province (RC9609).  相似文献   

17.
According to the results of cyclic triaxial tests on Hangzhou sands, a correlation is presented between liquefaction resistance and elastic shear modulus. Material-dependent but independent of confining stress, shows the linear relation of (σd/2)1/2 with Gmax. For its application to different soils, a method proposed by Tokimatsu [Tokimatsu K, Uchida A. Correlation between liquefaction resistance and shear wave velocity. Soils Found 1990:30(2):33–42] is utilized to normalize the shear modulus with respect to minimum void ratio. A simplified equation is established to evaluate the liquefaction potential by shear-wave velocity. The critical shear-wave velocity of liquefaction is in linear relation with 1/4 power of depth and the peak horizontal ground surface acceleration during earthquakes. The equation proposed in this paper is compared with previous methods especially the procedure proposed by Andrus [RD Andrus, KH Stokoe. Liquefaction resistance of soils from shear-wave velocity. J Geotech Geoenviron Eng 2000:126(11):1015–25]. The results show its simplicity and effectiveness when applied to sands, but more validation or modification is needed for its application to sand with higher fines content.  相似文献   

18.
In a typical seismic dam safety evaluation, standard penetration, cone penetration, Becker penetration, or shear wave velocity (Vs) tests are often first conducted near the toe of an earth dam to infer if any liquefiable soil exists in the foundation of the dam footprint. In current practice, a level-ground condition is commonly assumed when normalizing penetration resistance and Vs, and may be assumed (particularly in preliminary assessments) in applying the cyclic stress method (with or without the Kα correction) to evaluate liquefaction. However, the presence of an earth dam, or any other large embankment or structure, significantly alters the normal and shear stresses in the foundation. This paper identifies and quantifies potential errors in ignoring altered stresses near heavy structures, and presents a methodology to incorporate these effects within the framework of the simplified procedure. Specifically, the effects of these altered stresses (in comparison to the level-ground assumption with and without Kα correction) on the: (1) normalization of field measurements such as penetration resistance and Vs; (2) cyclic stress ratio (CSR); (3) cyclic resistance ratio (CRR); and (4) factor of safety against liquefaction triggering (FSliq), are evaluated by considering static and dynamic analyses of a generic earthen embankment (60 m high) resting on a saturated, cohesionless foundation (30 m deep). Our analyses indicated that ignoring the presence of induced static shear stresses can result in potentially unconservative errors in overburden correction factors of 30% to 60% at shallow depth (although this error is greatly muted at depths exceeding about 15 m), while errors in CSR potentially can range from about 20% too conservative to 40% unconservative. Potential errors in CRR can approach 50% unconservative at shallow depths, but again, this error is muted at depths exceeding about 15 m. Combining these factors, potentially unconservative errors in computing FSliq could exceed 100% at shallow depths (less than 15 m to 20 m) while at greater depth (exceeding 20 m) errors approach 20% on the conservative side.  相似文献   

19.
Based on the liquefaction performance of sites with seismic activity, the normalized shear wave velocity, Vs1, has been proposed as a field parameter for liquefaction prediction. Because shear wave velocity, Vs, can be measured in the field with less effort and difficulty than other field tests, its use by practitioners is highly attractive. However, considering that its measurement is associated with small strain levels, of the order of 10−4–10−3%, Vs reflects the elastic stiffness of a granular material, hence, it is mainly affected by soil type, confining pressure and soil density, but it is insensitive to factors such as overconsolidation and pre-shaking, which have a strong influence on the liquefaction resistance. Therefore, without taking account of the important factors mentioned above, the correlation between shear wave velocity and liquefaction resistance is weak.In this paper, laboratory test results are presented in order to demonstrate the significant way in which OCR (overconsolidation ratio) affects both shear wave velocity and liquefaction resistance. While Vs is insensitive to OCR, the liquefaction resistance increases significantly with OCR. In addition, the experimental results also confirm that Vs correlates linearly with void ratio, regardless of the maximum and minimum void ratios, which means that Vs is unable to give information about the relative density. Therefore, if shear wave velocity is used to predict liquefaction potential, it is recommended that the limitations presented in this paper be taken into account.  相似文献   

20.
Three methods that follow the general format of the Seed-Idriss simplified procedure for evaluating liquefaction resistance of soils are compared in this paper. They are compared by constructing relationships between penetration resistance and small-strain shear–wave velocity (VS) implied from cyclic resistance ratio (CRR) curves for the three methods, and by plotting penetration-VS data pairs. The penetration-VS data pairs are from 43 Holocene-age sand layers in California, South Carolina, Canada, and Japan. It is shown that the VS-based CRR curve is more conservative than CRR curves based on the Standard Penetration Test (SPT) and Cone Penetration Test (CPT), for the compiled Holocene data. This result agrees with the findings of a recent probability study where the SPT-, CPT-, and VS-based CRR curves were characterized as curves with average probability of liquefaction of 31, 50, and 26%, respectively. New SPT- and CPT-based CRR equations are proposed that provide more consistent assessments of liquefaction potential for the Holocene sand layers considered.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号