共查询到20条相似文献，搜索用时 578 毫秒
2.
Resource estimation of a placer deposit is always a difficult and challenging job because of high variability in the deposit.
The complexity of resource estimation increases when drill-hole data are sparse. Since sparsely sampled placer deposits produce
high-nugget variograms, a traditional geostatistical technique like ordinary kriging sometimes fails to produce satisfactory
results. In this article, a machine learning algorithm—the support vector machine (SVM)—is applied to the estimation of a
platinum placer deposit. A combination of different neighborhood samples is selected for the input space of the SVM model.
The trade-off parameter of the SVM and the bandwidth of the kernel function are selected by genetic algorithm learning, and
the algorithm is tested on a testing data set. Results show that if eight neighborhood samples and their distances and angles
from the estimated point are considered as the input space for the SVM model, the developed model performs better than other
configurations. The proposed input space-configured SVM model is compared with ordinary kriging and the traditional SVM model
(location as input) for resource estimation. Comparative results reveal that the proposed input space-configured SVM model
outperforms the other two models. 相似文献
3.
In this contribution, we used discriminant analysis (DA) and support vector machine (SVM) to model subsurface gold mineralization by using a combination of the surface soil geochemical anomalies and earlier bore data for further drilling at the Sari-Gunay gold deposit, NW Iran. Seventy percent of the data were used as the training data and the remaining 30 % were used as the testing data. Sum of the block grades, obtained by kriging, above the cutoff grade (0.5 g/t) was multiplied by the thickness of the blocks and used as productivity index (PI). Then, the PI variable was classified into three classes of background, medium, and high by using fractal method. Four classification functions of SVM and DA methods were calculated by the training soil geochemical data. Also, by using all the geochemical data and classification functions, the general extension of the gold mineralized zones was predicted. The mineral prediction models at the Sari-Gunay hill were used to locate high and moderate potential areas for further infill systematic and reconnaissance drilling, respectively. These models at Agh-Dagh hill and the area between Sari-Gunay and Agh-Dagh hills were used to define the moderate and high potential areas for further reconnaissance drilling. The results showed that the nu-SVM method with 73.8 % accuracy and c-SVM with 72.3 % accuracy worked better than DA methods. 相似文献
4.
AbstractTwo different forms of machine learning – an artificial neural network (ANN) and a support vector machine (SVM) – are used to estimate passive microwave (PMW) brightness temperatures (Tb) as observed by the special sensor microwave imager (SSM/I) satellite sensor over snow- covered land in North America. Both techniques reasonably reproduce unbiased estimates of SSM/I observations at 19.35 and 37.0 GHz for both vertically- and horizontally-polarized channels. When compared against SSM/I observations not used during training, domain-averaged statistics from 1 September 1987 to 1 September 2002 yielded a root mean squared error (RMSE) of less than 9 K for all frequency and polarization combinations examined in this study. Even though both ML techniques reasonably reproduced SSM/I Tb observations, the SVM outperformed the ANN because the SVM: (1) better captured the high-frequency (i.e. day-to-day) temporal characteristics in the Tb observations across the majority of the study domain, (2) better reproduced the spatial variability as a function of snow classification, and (3) yielded greater sensitivity to snow-related input variables during the estimation of PMW Tb. These findings reinforce previous research of SVM-based estimation of PMW Tb employing observations from the advanced microwave scanning radiometer. 相似文献
5.
In this paper, sparse data problem in neural network and geostatistical modeling for ore-grade estimation was addressed in the Nome offshore placer gold deposit. The problem of sparse data arises because of the random data division into training, validation, and test subsets during ore-grade modeling. In this regard, the possibility of generating statistically dissimilar data subsets by random data division was also explored through a simulation exercise. A combined approach of data segmentation and application of a Kohonen network then was used to solve the data division problem. Two neural networks and five kriging models were applied for grade modeling. The neural network was trained using an early stopping method. Performance evaluation of the models was carried out on the test data set. The study results indicated that all the models that were investigated in this study performed almost equally. It was also revealed that by using the secondary variable watertable depth the neural network and the kriging models slightly improved their prediction precision. Further, the overall R
2 of the models was poor as a result of high nugget (noisy) component in ore-grade variation. 相似文献
6.
Rockburst is a common dynamic geological hazard, severely restricting the development and utilization of underground space and resources. As the depth of excavation and mining increases, rockburst tends to occur frequently. Hence, it is necessary to carry out a study on rockburst prediction. Due to the nonlinear relationship between rockburst and its influencing factors, artificial intelligence was introduced. However, the collected data were typically imbalanced. Single algorithms trained by such data have low recognition for minority classes. In order to handle the problem, this paper employed stacking technique of ensemble learning to establish rockburst prediction models. In total, 246 sets of data were collected. In the preprocessing stage, three data mining techniques including principal component analysis, local outlier factor and expectation maximization algorithm were used for dimension reduction, outlier detection and outlier substitution, respectively. Then, the pre-processed data were split into a training set (75%) and a test set (25%) with stratified sampling. Based on the four classical single intelligent algorithms, namely k-nearest neighbors (KNN), support vector machine (SVM), deep neural network (DNN) and recurrent neural network (RNN), four ensemble models (KNN–RNN, SVM–RNN, DNN–RNN and KNN–SVM–DNN–RNN) were built by stacking technique of ensemble learning. The prediction performance of eight models was evaluated, and the differences between single models and ensemble models were analyzed. Additionally, a sensitivity analysis was conducted, revealing the importance of input variables on the models. Finally, the impact of class imbalance on the prediction accuracy and fitting effect of models was quantitatively discussed. The results showed that stacking technique of ensemble learning provides a new and promising way for rockburst prediction, which exhibits unique advantages especially when using imbalanced data. 相似文献
7.
Among the more popular spatial modeling techniques, artificial neural networks (ANN) are tools that can deal with non-linear
relationships, can classify unknown data into categories by using known examples for training, and can deal with uncertainty;
characteristics that provide new possibilities for data exploration. Radial basis functional link nets (RBFLN), a form of
ANN, are applied to generate a series of prospectivity maps for orogenic gold deposits within the Paleoproterozoic Central
Lapland Greenstone Belt, Northern Fennoscandian Shield, Finland, which is considered highly prospective yet clearly under
explored. The supervised RBFLN performs better than previously applied statistical weights-of-evidence or conceptual fuzzy
logic methods, and equal to logistic regression method, when applied to the same geophysical and geochemical data layers that
are proxies for conceptual geological controls. By weighting the training feature vectors in terms of the size of the gold
deposits, the classification of the neural network results provides an improved prediction of the distribution of the more
important deposits/occurrences. Thus, ANN, more specifically RBFLN, potentially provide a better tool to other methodologies
in the development of prospectivity maps for mineral deposits, hence aiding conceptual exploration. 相似文献
8.
With an increasing demand for raw materials, predictive models that support successful mineral exploration targeting are of great importance. We evaluated different machine learning techniques with an emphasis on boosting algorithms and implemented them in an ArcGIS toolbox. Performance was tested on an exploration dataset from the Iberian Pyrite Belt (IPB) with respect to accuracy, performance, stability, and robustness. Boosting algorithms are ensemble methods used in supervised learning for regression and classification. They combine weak classifiers, i.e., classifiers that perform slightly better than random guessing to obtain robust classifiers. Each time a weak learner is added; the learning set is reweighted to give more importance to misclassified samples. Our test area, the IPB, is one of the oldest mining districts in the world and hosts giant volcanic-hosted massive sulfide (VMS) deposits. The spatial density of ore deposits, as well as the size and tonnage, makes the area unique, and due to the high data availability and number of known deposits, well-suited for testing machine learning algorithms. We combined several geophysical datasets, as well as layers derived from geological maps as predictors of the presence or absence of VMS deposits. Boosting algorithms such as BrownBoost and Adaboost were tested and compared to Logistic Regression (LR), Random Forests (RF) and Support Vector machines (SVM) in several experiments. We found performance results relatively similar, especially to BrownBoost, which slightly outperformed LR and SVM with respective accuracies of 0.96 compared to 0.89 and 0.93. Data augmentation by perturbing deposit location led to a 7% improvement in results. Variations in the split ratio of training and test data led to a reduction in the accuracy of the prediction result with relative stability occurring at a critical point at around 26 training samples out of 130 total samples. When lower numbers of training data were introduced accuracy dropped significantly. In comparison with other machine learning methods, Adaboost is user-friendly due to relatively short training and prediction times, the low likelihood of overfitting and the reduced number of hyperparameters for optimization. Boosting algorithms gave high predictive accuracies, making them a potential data-driven alternative for regional scale and/or brownfields mineral exploration.
相似文献
9.
Globally, groundwater plays a major role in supplying drinking water for urban and rural population and is used for irrigation to grow crops and in many industrial processes. A novel self-learning random forest (SLRF) model is developed and validated for groundwater yield zonation within the Yeondong Province in South Korea. This study was conducted with an inventory data initially divided randomly into 70% for training and 30% for testing and 13 groundwater-conditioning factors. SLRF was optimized using Bayesian optimization method. We also compared our method to other machine learning methods including support vector machine (SVM), artificial neural networks (ANN), decision trees (DT), and voting ensemble models. Model validation was accomplished using several methods, including a confusion matrix, receiver operating characteristics, cross-validation, and McNemar’s test. Our proposed self-learning method improves random forest (RF) generalization performance by about 23%, with SLRF success rates of 0.76 and prediction rates of 0.83. In addition, the optimized SLRF performed better [according to a threefold cross-validated AUC (area under curve) of 0.75] than that using randomly initialized parameters (0.57). SLRF outperformed all of the other models for the testing dataset (RF, SVM, ANN, DT, and Voted ANN-RF) when the overall accuracy, prediction rate, and cross-validated AUC metrics were considered. The SLRF also estimated the contribution of individual groundwater conditioning factors and showed that the three most influential factors were geology (1.00), profile curvature (0.97), and TWI (0.95). Overall, SLRF effectively modeled groundwater potential, even within data-scarce regions. 相似文献
10.
为提高耕地保有量预测精度,将灰色预测GM(1,1)模型、动力预测模型、BP网络预测模型和加权支持向量回归机预测模型相结合,建立了基于支持向量回归机的耕地保有量组合预测模型,并将其用于温州市耕地保有量预测。结果表明,该模型比任一单一预测模型精度更高,可用于耕地保有量预测。 相似文献
11.
In order to determine whether it is desirable to quantify mineral-deposit models further, a test of the ability of a probabilistic
neural network to classify deposits into types based on mineralogy was conducted. Presence or absence of ore and alteration
mineralogy in well-typed deposits were used to train the network. To reduce the number of minerals considered, the analyzed
data were restricted to minerals present in at least 20% of at least one deposit type. An advantage of this restriction is
that single or rare occurrences of minerals did not dominate the results. Probabilistic neural networks can provide mathematically
sound confidence measures based on Bayes theorem and are relatively insensitive to outliers. Founded on Parzen density estimation,
they require no assumptions about distributions of random variables used for classification, even handling multimodal distributions.
They train quickly and work as well as, or better than, multiple-layer feedforward networks. Tests were performed with a probabilistic
neural network employing a Gaussian kernel and separate sigma weights for each class and each variable. The training set was
reduced to the presence or absence of 58 reported minerals in eight deposit types. The training set included: 49 Cyprus massive
sulfide deposits; 200 kuroko massive sulfide deposits; 59 Comstock epithermal vein gold districts; 17 quartzalunite epithermal
gold deposits; 25 Creede epithermal gold deposits; 28 sedimentary-exhalative zinc-lead deposits; 28 Sado epithermal vein gold
deposits; and 100 porphyry copper deposits. The most common training problem was the error of classifying about 27% of Cyprus-type
deposits in the training set as kuroko. In independent tests with deposits not used in the training set, 88% of 224 kuroko
massive sulfide deposits were classed correctly, 92% of 25 porphyry copper deposits, 78% of 9 Comstock epithermal gold-silver
districts, and 83% of six quartzalunite epithermal gold deposits were classed correctly. Across all deposit types, 88% of
deposits in the validation dataset were correctly classed. Misclassifications were most common if a deposit was characterized
by only a few minerals, e.g., pyrite, chalcopyrite,and sphalerite. The success rate jumped to 98% correctly classed deposits
when just two rock types were added. Such a high success rate of the probabilistic neural network suggests that not only should
this preliminary test be expanded to include other deposit types, but that other deposit features should be added 相似文献
13.
A pedogeochemical exploratory survey of gold deposits was carried out in the region of São Sepé (southernmost Brazil). The region comprises a predominantly metamorphosed belt of volcanoclastics, sediments, serpentinites, basalts, gabbros, chert, tuffs, and banded iron formation of the Proterozoic age. The anomalies were identified first by stream sediment heavy mineral survey at the regional scale of exploration. Once spatial continuity was modeled, ordinary block kriging was performed to generate geochemical maps. Indicator block kriging also was used as an alternative in analyzing and interpreting geochemical data. A novel approach is proposed, which combines both ordinary and indicator kriging for delineating geochemical anomalies. Probability maps proved to be appropriate for selecting new sites for further exploration. Gold anomalies in soils trending NE were well defined by geostatistical analysis and subsequently confirmed by drilling. 相似文献
14.
This paper highlights the performance of a radial basis function (RBF) network for ore grade estimation in an offshore placer
gold deposit. Several pertinent issues including RBF model construction, data division for model training, calibration and
validation, and efficacy of the RBF network over the kriging and the multilayer perceptron models have been addressed in this
study. For the construction of the RBF model, an orthogonal least-square algorithm (OLS) was used. The efficacy of this algorithm
was testified against the random selection algorithm. It was found that OLS algorithm performed substantially better than
the random selection algorithm. The model was trained using training data set, calibrated using calibration data set, and
finally validated on the validation data set. However, for accurate performance measurement of the model, these three data
sets should have similar statistical properties. To achieve the statistical similarity properties, an approach utilizing data
segmentation and genetic algorithm was applied. A comparative evaluation of the RBF model against the kriging and the multilayer
perceptron was then performed. It was seen that the RBF model produced estimates with the R
2 (coefficient of determination) value of 0.39 as against of 0.19 for the kriging and of 0.18 for the multilayer perceptron. 相似文献
15.
The geographically weighted regression (GWR) has been widely applied to many practical fields for exploring spatial non-stationarity of a regression relationship. However, this method is inherently not robust to outliers due to the least squares criterion in the process of estimation. Outliers commonly exist in data sets and may lead to a distorted estimate of the underlying regression relationship. Using the least absolute deviation criterion, we propose two robust scenarios of the GWR approaches to handle outliers. One is based on the basic GWR and the other is based on the local linear GWR (LGWR). The proposed methods can automatically reduce the impact of outliers on the estimates of the regression coefficients and can be easily implemented with modern computer software for dealing with the linear programming problems. We then conduct simulations to assess the performance of the proposed methods and the results demonstrate that the methods are quite robust to outliers and can retrieve the underlying coefficient surfaces satisfactorily even though the data are seriously contaminated or contain severe outliers. 相似文献
16.
以洪河国家级自然保护区为研究对象,应用卷积神经网络（CNN）方法进行高分辨率湿地遥感影像的分类研究,并与基于光谱支持向量机（SP-SVM）的方法和基于纹理及光谱的支持向量机（TSP-SVM）的方法进行了对比。结果显示,对于所选取的2个研究区域,CNN分类方法的全局精度高于SP-SVM方法5.61%和5%,高于TSP-SVM方法4.18%和4.15%。尤其对于部分湿地植被的分类精度明显高于SP-SVM和TSP-SVM方法。研究表明,卷积神经网络为湿地识别的精细划分提供了有利的手段。 相似文献
17.
Tropical laterite-type bauxite deposits often pose a unique challenge for resource modelling and mine planning due to the extreme lateral variability at the base of the bauxite ore unit within the regolith profile. An economically viable drilling grid is often rather sparse for traditional prediction techniques to precisely account for the lateral variability in the lower contact of a bauxite ore unit. However, ground-penetrating radar (GPR) offers an inexpensive and rapid method for delineating laterite profiles by acquiring fine-scale data from the ground. These numerous data (secondary variable) can be merged with sparsely spaced borehole data (primary variable) through various statistical and geostatistical techniques, provided that there is a linear relation between the primary and secondary variables. Four prediction techniques, including standard linear regression, simple kriging with varying local means, co-located cokriging and kriging with an external drift, were used in this study to incorporate exhaustive GPR data in predictive estimation the base of a bauxite ore unit within a lateritic bauxite deposit in Australia. Cross-validation was used to assess the performance of each technique. The most robust estimates are produced using ordinary co-located cokriging in accordance with the cross-validation analysis. Comparison of the estimates against the actual mine floor indicates that the inclusion of ancillary GPR data substantially improves the quality of the estimates representing the bauxite base surface. 相似文献
18.
This paper is focused on the method for extracting glacier area based on ENVISAT ASAR Wide Swath Modes (WSM) data and digital elevation model (DEM) data, using support vector machines (SVM) classification method. The digitized result of the glacier coverage area in the western Qilian Mountains was extracted based on Enhanced LandSat Thematic Mapper (ETM+) imagery, which was used to validate the precision of glacier extraction result. Because of similar backscattering of glacier, shadow and water, precision of the glacier coverage area extracted from single-polarization WSM data using SVM was only 35.4%. Then, texture features were extracted by the grey level co-occurrence matrix (GLCM), with extracted glacier coverage area based on WSM data and texture feature information. Compared with the result extracted from WSM data, the precision improved 13.2%. However, the glacier was still seriously confused with shadow and water. Finally, DEM data was introduced to extract the glacier coverage area. Water and glacier can be differentiated because their distribution area has different elevations; shadow can be removed from the classification result based on simulated shadow imagery created by DEM data and SAR imaging parameters; finally, the glacier coverage area was extracted and the precision reached to 90.2%. Thus, it can be demonstrated that the glacier can be accurately semi-automatically extracted from SAR with this method. The method is suitable not only for ENVISAT ASAR WSM imagery, but also for other satellite SAR imagery, especially for SAR imagery covering mountainous areas. 相似文献
19.
为了在保持对目标检测和分类分析所需信息的同时,降低高光谱影像的维度,提出了一种混合优化策略的特征选择方法。该方法将遗传算法和二进制粒子群优化算法融合成一种新的混合优化策略（GANBPSO）,自动选择最优波段组合,同时优化分类器支持向量机（RBF-SVM）的参数,以提高分类器的分类性能。为了说明所提出方法的有效性,采用了在高光谱分类中广泛使用的Indian Pines（AVIRIS 92AV3C）数据集进行测试。结果表明所提出方法（GANBPSO-SVM）能够自动选择包含最多信息的特征子集以保证分类精度,而不需要预先设置所需要的特征子集数量,本方法与传统方法相比具有更好的分类效果。 相似文献
20.
Sediments are typically analyzed for C, N, and P for characterization, sediment quality assessment, and in nutrient and contaminant studies. Cost and time required for analysis of these constituents by conventional chemical techniques can be limiting factors in these studies. Determination of these constituents by near-infrared reflectance spectroscopy (NIRS) may be a rapid, cost-effective method provided the technology can be applied generally across aquatic ecosystems. In this study, we explored the feasibility of using NIRS to predict total C, CO 3
–2 organic C, N, and P in deep-water sediment cores from four Canadian lakes varying over 19 degrees of latitude. Concentration ranges of constituents in the samples (dry weight basis) were total C, 12-55; CO 3
–2, 6-26; organic C, 7-31; N, 0.6-3.1; and P, 0.22-2.1 mg g –1. Coefficients of determination, r2, between results from conventional chemical analysis and NIR-predicted concentrations, based on calibrations across all the four lakes, were 0.97-0.99 for total C, organic C, and N. Prediction for CO 3
–2 was good for the hard water lake from a calibration across all four lakes, but this constituent in the three soft water lakes was better predicted by a calibration across the soft water lakes. The NIR calibration for P fell below acceptable levels for the technique, but proved useful in the identification of outliers from the chemical method that were later removed with the re-analysis of several samples. This study demonstrated that NIRS is useful for rapid, simultaneous, cost-effective analysis of total C, CO 3
–2, organic C, N, and P in dried sediments from lakes at widely varying latitudes. Also, this study showed that NIRS is an independent analytical tool useful for the identification of outliers that may be due to error during the analysis or to distinctive composition of the samples. 相似文献
|
