首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 27 毫秒
1.
In this study, the decolorization, dearomatization, and mineralization efficiencies of different advanced oxidation processes (AOPs; namely O3, O3/Fe(II), O3/Fe(II)/UVA, and O3/TiO2/UVA) were investigated for the azo dye C.I. Reactive Red 194 (RR194). The effects of pH (3–11), amount of TiO2 (0.05–1 g/L), and concentration of Fe(II) (0.1–1.6 mM) were investigated for the applied methods. The decolorization and mineralization efficiencies of the photocatalytic ozonation system (O3/TiO2/UVA) were increased by decreasing the pH of the dye solution in contrast to the ozonation system (O3). Decolorization of RR194 was increased in the photocatalytic ozonation system with an increasing amount of catalyst however, a decreasing was occurred for the homogeneous catalytic system (O3/Fe(II)) when increasing the concentration of catalyst. The decolorization efficiency of the homogeneous catalytic system (O3/Fe(II)) was enhanced when combined with UVA light. In our study, the most efficient method for dearomatization and mineralization was the O3/TiO2/UVA among the applied AOPs.  相似文献   

2.
Solar photocatalytic decolorization and detoxification of batik dye wastewater using titanium dioxide (TiO2) immobilized on poly‐3‐hydroxybutyrate (P(3HB)) film was studied. The effects of initial dye concentration, catalyst concentration, P(3HB) film thickness, and fabrication methods of the nanocomposite films were evaluated against methylene blue, a standard organic dye. It was observed that 0.4 g of P(3HB)‐40 wt% TiO2 removed 96% of the color under solar irradiation. P(3HB) and TiO2, mixed concurrently in chloroform followed by stirring for 24 h showed a more even distribution of the photocatalyst on the polymer surface and yielded almost 100% color removal. The photocatalytic films were able to completely decolorize real industrial batik dye wastewater in 3 h and induced a chemical oxygen demand (COD) reduction of 80%. Reusability of the 0.4 g P(3HB)‐40 wt% TiO2 film in decolorizing the batik dye wastewater was also possible as it gave a high consistent value of decolorization percentage (>80%) even after the sixth repeated usage. Recovery step of the photocatalysts was also not required in this simple treatment system. The decolorized batik dye wastewater had less/no toxic effects on mosquito larvae, Aedes aegypti, and microalgae, Scenedesmus quadricauda indicating simultaneous detoxification process along with the decolorization process.  相似文献   

3.
In this study, the adsorption of reactive red 120 (RR 120) on pistachio husk, and the modeling of the adsorption was investigated. Characterization of the pistachio husk was confirmed by Fourier transform infrared spectroscopy. The pHzpc of pistachio husk was found to be pH 8.5. Increasing the initial pH value decreased (p < 0.01) the amount of dye adsorbed. However, increasing the initial dye concentration from 50 to 900 mg/L at pH 1 increased (p < 0.01) the equilibrium dye uptake from 20.83 to 182.10 mg/g. Results indicated that this adsorbent had great potential for the removal of RR 120 dye. The logistic model was found to be the most suitable of the kinetic and equilibrium models tested to describe the adsorption of the dye. The parameters determined from the logistic model were well correlated with the initial dye concentration, and were seen to increase with the increasing initial dye concentration, but this was not observed from pseudo‐second order kinetics.  相似文献   

4.
Adsorption of reactive black 5 (RB5) from aqueous solution onto chitosan was investigated in a batch system. The effects of solution pH, initial dye concentration, and temperature were studied. Adsorption data obtained from different batch experiments were modeled using both pseudo first‐ and second‐order kinetic equations. The equilibrium adsorption data were fitted to the Freundlich, Tempkin, and Langmuir isotherms over a dye concentration range of 45–100 µmol/L. The best results were achieved with the pseudo second‐order kinetic and Langmuir isotherm equilibrium models, respectively. The equilibrium adsorption capacity (qe) was increased with increasing the initial dye concentration and solution temperature, and decreasing solution pH. The chitosan flakes for the adsorption of the dye was regenerated efficiently through the alkaline solution and was then reused for dye removal. The activation energy (Ea) of sorption kinetics was estimated to be 13.88 kJ/mol. Thermodynamic parameters such as changes in free energy (ΔG), enthalpy (ΔH), and entropy (ΔS) were evaluated by applying the van't Hoff equation. The thermodynamics of reactive dye adsorption by chitosan indicates its spontaneous and endothermic nature.  相似文献   

5.
Response surface methodology (RSM) was employed to investigate the effects of different operational parameters on the biological decolorization of a dye solution containing malachite green (MG) in the presence of macroalgae Chara sp. The investigated variables were the initial pH, initial dye concentration, algae amount, and reaction time. Central composite design (CCD) was used for the optimization of biological decolorization process. Predicted values were found to be in good agreement with experimental values (R2 = 0.982 and Adj‐R2 = 0.966), which indicated suitability of the employed model and the success of RSM. The results of optimization predicted by the model showed that maximum decolorization efficiency was achieved at the optimum condition of the initial pH 6.8, initial dye concentration 9.7 mg/L, algae amount 3.9 g, and reaction time 75 min. UV–VIS spectra and FT‐IR analysis showed degradation of MG.  相似文献   

6.
Activated carbons prepared from sunflower seed hull have been used as adsorbents for the removal of acid blue 15 (AB‐15) from aqueous solution. Batch adsorption techniques were performed to evaluate the influences of various experimental parameters, e. g., temperature, adsorbent dosage, pH, initial dye concentration and contact time on the adsorption process. The optimum conditions for AB‐15 removal were found to be pH = 3, adsorbent dosage = 3 g/L and equilibrium time = 4 h at 30°C. The adsorption of AB‐15 onto the adsorbent was found to increase with increasing dosage. It was found from experimental results that the Langmuir isotherm fits the data better than the Freundlich and Temkin isotherms. The maximum adsorption capacity, Qm (at 30°C) was calculated for SF1, SF2, and SF3 as 75, 125 and 110 mg g–1 of adsorbent, respectively. It was found that the adsorption follows pseudo‐second order kinetics. The thermodynamic parameters such as ΔG°, ΔH°, and ΔS° were also evaluated. The activated carbons prepared were characterized by FT‐IR, SEM and BET analysis.  相似文献   

7.
The effect of varying parameters such as dye concentration, adsorbent dose, pH and temperature on the adsorption capacity of Pleurotus ostreatus is investigated. The commonly available white rot fungus Pleurotus ostreatus is investigated as a viable biomaterial for the biological treatment of synthetic basic methylene blue effluents. The results obtained from the batch experiments reveal the ability of the fungus to remove methylene blue. The performance is dependent on the dye concentration, pH, and fungal biomass. The equilibrium and kinetics of adsorption are investigated and the Langmuir equation is used to fit the equilibrium isotherm. The adsorption isotherm of methylene blue follows only the Langmuir model with a correlation coefficient of ca. 0.96–0.99. The maximum adsorption capacity is ca. 70 mg of dye per g of dry fungus at pH 11, 70 mg L–1 dye, and 0.1 g L–1 fungus concentration, respectively. This study demonstrates that the fungus could be used as an effective biosorbent for the treatment of dye‐containing wastewater streams.  相似文献   

8.
  相似文献   

9.
Laccase from the white‐rot fungus Pleurotus florida, produced under solid‐state fermentation conditions, was used for the decolorization of reactive dye Remazol Brilliant Blue R (RBBR). RBBR was decolorized up to 46% by P. florida laccase alone in 10 min. In the presence of N‐hydroxybenzotriazole (HBT), the rate of decolorization was enhanced 1.56‐fold. Central composite design of response surface methodology with four variables namely, dye, enzyme, redox mediator concentrations, and time at five levels was applied to optimize the RBBR decolorization. The predicted optimum level of variables for maximum RBBR decolorization (87%) was found to be 52.90 mg L?1 (RBBR), 1.87 U mL?1 (laccase), 0.85 mM (HBT), and 7.17 min (time), respectively. The validation results showed that the experimental value of RBBR decolorization (82%) was close to the predicted one. The disappearance of C–N and C–X groups, and a small shift in N–H groups in Fourier‐transform infra red (FTIR) spectroscopy confirms the degradation of RBBR chromophore by laccase enzyme. The phytotoxicity of RBBR was considerably reduced after the treatment with laccase. RBBR decolorization kinetics; Km and Vmax were calculated to be 145.82 mg L?1 and 24.86 mg L?1 min, respectively.  相似文献   

10.
This study examined the UV/H2O2 decolorization efficiency under high UV photon flux (intensity normalized by photon energy) irradiation; the incident UV was ranging from 3.13 × 10?8 to 3.13 × 10?6 einstein cm?2 s?1. The experimental results showed that complete decolorization of 20 mg L?1 methylene blue (MB) can be achieved within 5 s and 99% decolorization of 1000 mg L?1 MB can be achieved in 180 s under the best condition of high UV intensity UV/H2O2 process. To the best of our knowledge, UV/H2O2 decolorization process in such a short time has not been reported. The electrical energy per order of the process was 16.21 kWh m?3 order?1 and it is relatively economical compared with other advanced oxidation processes. The kinetics of decolorization follows pseudo‐first order. There is a linear relationship between rate constant and UV intensity, which indicates that increasing UV intensity does not cause decline in light utilization efficiency. The experiment related to initial substrate concentration shows decolorization rate of different substrate concentration (20–1000 mg L?1) are closed to each other. Besides, optimal H2O2 concentration, comparative study with low photon flux light, decolorization of other types of dyes and TOC removal were also studied.  相似文献   

11.
Commercial ZnO, MnO2, and their acid‐treated forms were used as catalysts for oxidative degradation of Orange II dye in water. ZnO and MnO2 were treated with 0.5, 0.75, or 1.0 N aqueous H2SO4. The acid treated oxides were found to be highly effective in bringing about degradation of Orange II in water. As much as 68.7% of the dye in an aqueous solution of 1 mg/L concentration could be degraded with untreated ZnO as the catalyst. The degradation increased to 79.5% with 1.0 N acid treated ZnO as the catalyst when the reaction was carried out at room temperature for 240 min. The catalytic activity was slightly affected by the solution pH in the range of 2.0–8.0. With MnO2 as the catalyst, there was only 12.7% degradation of the dye, but this increased up to 100% when 0.5 N acid treated MnO2 was used as the catalyst. It was found that a catalyst loading of 5.0 g/L of raw and acid‐treated ZnO and a loading of 0.5 g/L of raw and acid‐treated MnO2 could bring about almost 100% degradation of Orange II in water in an interaction time of 240 min at room temperature.  相似文献   

12.
Batch sorption experiments were carried out for the adsorption of the basic dye Rhodamine B from aqueous solution using baryte as the adsorbent. The effect of adsorbent dosage, temperature, initial dye concentration and pH were studied. Adsorption data were modeled using first and second order kinetic equations and the intra particle diffusion model. Kinetic studies showed that the adsorption process followed second order rate kinetics with an average rate constant of 0.05458 g mg–1 min–1. Dye adsorption equilibrium was attained rapidly after 30 min of contact time. The equilibrium data was fitted to the Langmuir, Freundlich and Tempkin isotherms over a dye concentration range of 50–250 mg/L. The adsorption thermodynamic parameters showed that adsorption was an exothermic, spontaneous and less ordered arrangement process. The adsorbent, baryte, was characterized by Fourier transform infrared spectroscopy and scanning electron microscopy. The results showed that baryte has good potential for the removal of Rhodamine B from dilute aqueous solution.  相似文献   

13.
In this study, the oxidative decolorization of C.I. reactive yellow 145 (RY 145) from synthetic textile wastewater including RY 145 and polyvinyl alcohol by Fenton and sono‐Fenton processes which are the combination of Fenton process with ultrasound has been carried out. The effects of some operating parameters which are the initial pH of the solution, the initial concentration of Fe2+, H2O2, and the dye, temperature, and agitation speed on the color and chemical oxygen demand (COD) removals have been investigated. The optimum conditions have been found as [Fe2+] = 20 mg/L, [H2O2] = 20 mg/L, pH 3 for Fenton process and [Fe2+] = 20 mg/L, [H2O2] = 15 mg/L, pH 3 for sono‐Fenton process by indirectly sonication at 35 kHz ultrasonic frequency and 80 W ultrasonic power. The color and COD removal efficiencies have been obtained as 91 and 47% by Fenton process, and 95 and 51% by sono‐Fenton processes, respectively. Kinetic studies have been performed for the decolorization of RY 145 under optimum conditions at room temperature. It has been determined that the decolorization has occurred rapidly by sono‐Fenton process, compared to Fenton process.  相似文献   

14.
Granular activated carbon (GAC) adsorption of two representative taste and odor (T & O) compounds, 2‐isopropyl‐3‐methoxy pyrazine (IPMP), and 2‐isobutyl‐3‐methoxy pyrazine (IBMP), in drinking water was investigated. Results show that the modified Freundlich equation best fit the experimental data during the adsorption isotherm tests, and the pseudo first‐order kinetics and intra‐particle diffusion kinetics well described the adsorption kinetics pattern. The calculated thermodynamic parameters (ΔH0, ΔS0, and ΔG0) indicated a spontaneous and endothermic adsorption process. Factors affecting the treatment efficiency were carefully evaluated. Acidic and alkaline conditions both favored GAC adsorption of IPMP and IBMP, especially the former. With the GAC dosage increasing, the first order adsorption rates increased, while the intra‐particle adsorption rates decreased. Within 12 h, 200 mg/L GAC could remove >90% of 150 µg/L IPMP and IBMP via adsorption at pH 3–11. Therefore, GAC is a promising treatment technology to control the T & O compounds associated water pollution.  相似文献   

15.
The relative ability of Coriolus versicolor to grow on coir fiber as a ligninocellulosic material was examined. Addition of yeast extract to the culture increased laccase activity, which was further enhanced to the level of 1976 U/L by addition of 1 mM copper sulfate. Laccase thus produced was used without further purification for the decolorization of various dye solutions. Decolorization efficiency was compared with the conventional environment friendly oxidation technique using hydrogen peroxide in the presence of UV radiations. Laccase showed good decolorization in most of the cases. Excellent results were achieved when the dye solution was treated successively with laccase and UV/H2O2 wherein more than 80% decolorization was achieved. This value is remarkably higher than that attained either by the enzyme or UV/H2O2 photolysis alone.  相似文献   

16.
The present work involves the study of Se(IV) adsorption onto granular activated carbon (GAC) and powdered activated carbon (PAC). The adsorbents are coated with ferric chloride solution for the effective removal of selenium. The physico-chemical characterization of the adsorbents is carried out using standard methods, e. g., proximate analysis, scanning electron microscopy (SEM), fourier transform infrared spectroscopy (FTIR), thermo-gravimetric (TGA) and differential thermal analysis (DTA), etc. The FTIR spectra of the GAC and PAC indicate the presence of various types of functional groups, e. g., free and hydrogen bonded OH groups, silanol groups (Si-OH), alkenes, and CO group stretching from aldehydes and ketones on the surface of adsorbents. Batch experiments are carried out to determine the effect of various factors such as adsorbent dose (w), initial pH, contact time (t), and temperature (T) on the adsorption process. The optimum GAC and PAC dosage is found to be 10 g/L and 8 g/L, respectively, for Se(IV) removal with C0 = 100 mg/L. The percent removal of Se(IV) increases with increasing adsorbent concentration, while removal per unit weight of adsorbent increases with decreasing adsorbent concentration. Se(IV) adsorption onto both the GAC and PAC adsorbents is high at low pH values, and decreases with increased initial pH. The results obtained are analyzed by various kinetic models. The parameters of pseudo-first order, pseudo-second order kinetics, and Weber-Morris intra particle kinetics are determined. It is seen that the sorption kinetics of Se(IV) onto GAC and PAC can be best represented by the pseudo-second order kinetic model.  相似文献   

17.
In the present study, effects of operational parameters on the electrical energy consumption for photooxidative process (UV/H2O2) for the decolorization of C. I. Acid Red 88 (AR88) have been investigated. In a series of experiments, 20 mg L?1 of AR88 solution were irradiated in the presence of different concentrations of H2O2 (to find out optimum amount of H2O2) by UV light intensity of 30 W m?2 for certain irradiation times. The decolorization of the dye followed pseudo first‐order kinetics, and hence, the figure‐of‐merit electrical energy per order (EEO) is appropriate for estimating the electrical energy efficiency. The electrical energy consumption was determined during the variation of some parameters such as initial H2O2 concentration, initial dye concentration, UV light intensity, pH, and the gap size of solution. Results showed that electrical energy could be reduced by optimizing operational parameters.  相似文献   

18.
This paper discusses the possibility of immobilization of TiO2 nanoparticles onto recycled wool‐based nonwoven material, which can be utilized for removal of dyes from wastewater. The photocatalytic activity of TiO2 nanoparticles deposited on the nonwoven material was evaluated in the aqueous solution of direct dye C.I. Direct Blue 78 under the UV illumination. Nonwoven material modified with TiO2 nanoparticles provides complete removal of dye from the solution already after 4–6 h of UV illumination. However, photodegradation of the dye adsorbed on the nonwoven material was obtained within 24 h of UV illumination. The rate of dye adsorption and photodegradation depends on the amount of deposited TiO2 nanoparticles. The increase of initial dye concentration induced decrease in photocatalytic efficiency of immobilized TiO2 nanoparticles. The highest photodegradation rate was achieved in acidic conditions. Elevated temperatures positively affected the removal of dye from solution. Photocatalytic activity of TiO2 nanoparticles deposited on nonwoven material was preserved after three photodegradation cycles.  相似文献   

19.
Acid violet 19 (AV) belongs to the triphenylmethane (TPM) class of dyes which are potentially mutagenic or carcinogenic. However, very little studies on biodegradation of AV were reported as compared to other TPM dyes such as malachite green and crystal violet. In this study, AV was decolorized up to 98% within 30 min by Pseudomonas aeruginosa BCH. The decolorization depends on the initial dye concentration, pH, and temperature. However, the dye was decolorized under wide pH and temperature ranges with an optimum of pH 7 and 30°C. Up to 250 mg L?1 of dye was found to be tolerated and decolorized by this strain. It showed decolorization ability for seven repeated dye addition cycles. The effect of additional carbon sources on dye decolorization was studied in which mannitol containing medium showed decolorization in 15 min. Induction in the enzyme activities of laccase, NADH‐DCIP reductase, and veratryl alcohol oxidase (VAO) indicates their involvement in AV degradation. Various analytical studies viz. UV–VIS, HPTLC, HPLC, and FTIR confirmed the biodegradation of AV by the bacterium. Based on GC‐MS analysis, a possible degradation pathway for AV was proposed. The phytotoxicity studies using Phaseolus mungo and Sorghum vulgare revealed the less toxic nature of metabolites formed after AV degradation.  相似文献   

20.
The photocatalytic activity of combustion synthesized nanocrystalline CeAlO3 was determined for the degradation of four anionic and four cationic dyes. The perovskite oxide showed high‐photocatalytic activity and a complete degradation of all the dyes was possible within 2 h. The photocatalytic activity of the compound was comparable with the activity of the commercial Degussa P‐25 TiO2 catalyst. The degradation of dyes was found to follow first order kinetics and the first order degradation rate constants were determined.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号