共查询到19条相似文献，搜索用时 171 毫秒
1.
基于振动的水下环肋圆柱壳临界载荷的预报具有结构无损的优势。以Flügge壳体理论和基于正交各向异性理论的环肋圆柱壳自由振动方程为基础,运用波传播法得出耦合系统的频率方程,并求出对应外压下的固有频率,通过最小二乘法线性拟合获得临界载荷、外压及固有频率的关系表达式。绘图得知任意边界的同一模态下,水下环肋圆柱壳的固有频率平方与静水压力成正比。结构失稳时,刚度丧失,固有频率降为零,据此求出水下环肋圆柱壳的最小弹性临界载荷。分析了不同边界条件对环肋圆柱壳临界载荷的影响,得知边界约束越强,环肋圆柱壳的临界载荷越大。结果对比表明了本方法的正确性,为水下环肋圆柱壳的固有频率及临界载荷的理论计算提供了一种新的方法。 相似文献
2.
3.
4.
5.
6.
环肋圆柱壳是深海无人系统广泛采用的一种耐压结构形式,保障其结构安全是系统研制过程中非常重要的一环。针对环肋圆柱壳的结构特征推导了组合结构重量关系式和结构参数简化估算方法,并以一种超长型深海无人系统耐压结构为例,围绕大长径比环肋圆柱壳的结构形式、设计计算、仿真分析、模型验证等开展研究。研究表明提出的大长径比环肋圆柱壳结构设计参数简化估算方法具有较好的适应性。相关计算和分析结果可以为该型深海无人系统结构设计提供技术支撑,也可以为其他类似耐压结构设计提供参考。 相似文献
7.
8.
周向变刚度环肋圆柱壳应力分析研究 总被引：1，自引：0，他引：1
采用大曲率梁理论和弹性基础梁带理论,建立潜艇特殊舱段结构的力学模型。利用能量法求出肋位处耐压船体壳板中面周向应力。建立环肋圆柱壳微分方程并根据边界条件求解,得到周向变刚度环肋圆柱壳应力计算方法。通过理论分析和模型试验验证了本计算方法。 相似文献
9.
为了从整个可行解空间研究圆柱壳结构特性,采用全因子试验设计获得变量范围内的可行解空间,通过相关理论推导计算得到不同结构形式圆柱壳的强度、稳定性以及振动频率等指标。采用相关性分析、主成分分析以及变量聚类分析方法根据可行解空间的数据对环肋圆柱壳强度、稳定性、振动频率之间以及这些属性与设计变量之间的关系进行研究。采用相关系数矩阵图、主成分分布图以及谱系聚类图将多变量分析的结果可视化。对可视化结果进行分析发现了圆柱壳结构属性之间的矛盾性,变量、属性之间的相似性和关系的复杂性。通过多变量分析得到的相关结论能够作为实际工程设计的参考。 相似文献
10.
均匀外压圆柱壳设计与实验 总被引：1，自引：0，他引：1
一个容器从外部受到均匀压力和从内部受到均匀压力,容器的受力状态和破坏形式都不一样。在日常生活和生产活动中,人们遇到的容器受内压现象较多,有些容器受外压,其压力都不太大.在海洋中受外压的容器,众所周知的有潜艇,但是潜艇所受到的外压仍不算大,而且壳体的强度设计是建立在薄壳理论基础上。介于或接近厚壳理论,承受更大外部均匀压力,如10~7Pa乃至10~8Pa的外压容器,在探测海洋的研究中是必不可少的。然 相似文献
11.
The paper presents a non-linear buckling analysis of ring stiffened cylindrical shells subject to external pressure. The collapse pressure is calculated by assuming failure to occur when the material reaches a plastic stress state defined by the Ilyushin criterion. It is shown in the paper that use of the non-linear theory can reduce the estimated first yield by up to 25% in comparison to the linear buckling analysis used up to now. Comparison of predicted failure loads are in good agreement with the lower bound of test results. 相似文献
12.
环肋圆柱壳体在水下冲击波作用下的动力弹塑性屈曲 总被引：1，自引：0，他引：1
本文以加肋圆柱壳体为对象建立力学模型，在水下爆炸产生的冲击波作用下，考虑流体与结构的耦合效应，研究加肋圆柱壳体的弹塑性失稳变形量及动力响应特性。数值分析显示出的最终变形形状和压力变化过程与实验资料一致的 相似文献
13.
Shen Huishen
Professor 《中国海洋工程》1996,(4)
- posthuckling analysis is presented for the stilTened cylindrical shell of finite length subjected to combined loading of external liquid pressure and axial compression. The formulations are based on a boundary layer theory of shell buckling, which includes the effects of nonlinear prebuckling deformations, nonlinear large deflections in the postbuckling range and initial geometrical imperfections of the shell. The "smeared stifl'cner" approach is adopted for the stiffencrs. In the analysis a singular perturbation technique is used (o determine the interactive buckling loads and the postbuckling paths. Numerical examples cover the performance of perfect and imperfect, stringer and ring stiffened cylindrical shells. Typical results arc presented in the dimcnsionless graphical form. 相似文献
14.
This paper presents analytical and numerical researches on the buckling or collapse of offshore pipelines under external hydrostatic pressure. Firstly the case of homogeneous ring model is investigated followed by a detailed study on corroded rings. The elastic-plastic collapse pressure could be treated as the least root of an elementary function. We prove that collapse pressure is a strictly increasing function of mode number in this paper and present some interesting structures of the roots. Partially corroded ring is parametrized by corrosion depth and angle extent. A comprehensive comparison shows that plasticity should not be neglected when the ring is thick-walled. Moreover, a study on large deflection deformation of 3D cylindrical shells quasi-statically dented under constant external pressure is carried out theoretically and numerically. The buckle propagation pressure is shown to be a meaningful value to normalize external pressure. This paper serves to enhance the understanding of destabilizing effect of external pressure mainly applicable and relevant to subsea offshore industry. 相似文献
15.
A postbuckling analysis is presented for a shear deformable anisotropic laminated cylindrical shell with stiffener of finite length subjected to axial compression. The material of each layer of the shell is assumed to be linearly elastic, anisotropic and fiber-reinforced. The governing equations are based on a higher order shear deformation shell theory with von Kármán-Donnell-type of kinematic nonlinearity and including the extension/twist, extension/flexural and flexural/twist couplings. The ‘smeared stiffener’ approach is adopted for the beam stiffeners. This arrangement allows the beam stiffeners to be assembled directly into the global stiffness matrix. The nonlinear prebuckling deformations and initial geometric imperfections of the shell are both taken into account. A singular perturbation technique is employed to determine the buckling loads and postbuckling equilibrium paths. The numerical illustrations concern the postbuckling response of perfect and imperfect, grid, axial, ring stiffened, and unstiffened shells. The results confirm that there exists a compressive stress along with an associate shear stress and twisting when the anisotropic shell is subjected to axial compression. The postbuckling equilibrium path is unstable for the moderately thick cylindrical shell under axial compression and the stiffened shell structure is imperfection-sensitive. 相似文献
16.
17.
为提高耐压柱壳设计效率,设计了耐压柱壳参数化分析流程。研究了有限元分析所涉及的材料属性、载荷施加、边界条件设置等内容,确定了采用弧长法分析耐压柱壳稳定性。利用Python语言对于ABAQUS软件进行了二次开发,利用Isight软件实现了ABAQUS的集成,实现了耐压柱壳有限元分析模型的网格自动划分、自动分析计算等。选择样本点进行参数化分析,利用响应面模型对于样本点进行了拟合,得到了具有较高拟合精度、满足工程需要的近似模型,进行了设计变量的灵敏度分析。研究结果表明:参数化分析流程可实现耐压柱壳的自动分析、近似模型及灵敏度分析,可降低耐压柱壳分析难度,均可提高耐压柱壳设计效率。 相似文献
18.
This study investigated the linear and nonlinear dynamic responses of three cylindrical shell structures subjected to underwater small charge explosions in a 4 m×4 m×4 m water tank. The dimensions of the cylindrical shell structures were 90 cm×30 cm×1 mm (length×diameter×thickness). Both ends of the cylindrical shell were mounted with thick plates to provide support and create an enclosed space. The three cylindrical shell structures were un-stiffened, internally stiffened and externally stiffened, respectively. The experiments involving the dynamic response of cylinders subjected to underwater explosion (UNDEX) were performed under different standoff distances, varying from 210 to 35 cm. A small quantity of explosives was used to generate the shock loading. The plastic deformation of the cylindrical shell was observed at a standoff distance of less than 50 cm. Other conditions were tested to examine cylinder linear response. Dynamic analyses were performed for the experimental model using FEM and compared with the test results. The accelerations and dynamic strains of cylindrical shells obtained from the experiment were compared with those obtained by FE analysis. Finally, problems related to small-scale UNDEX experiments performed in small water tanks were analyzed. 相似文献