首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 906 毫秒
1.
    
The earthquake size distribution is generally considered to obey the Gutenberg-Richter (GR) law. We have introduced the concept of the b value spectrum based on the moment method to investigate the deviation of the actual magnitude distribution of earthquakes from this law. This enables us to describe characteristic features of the magnitude frequency distribution of earthquakes. We found also a simple relation between the η value and the b value spectrum. Analysis using this scheme showed that the actual size distributions of earthquakes have large variations from case to case and sometimes deviate considerably from the widely assumed the GR formula.  相似文献   

2.
We performed a tectonophysical analysis of earthquake frequency–size relationship types for large Central Asian earthquakes in the regions of dynamical influence due to major earthquake-generating faults based on data for the last 100 years. We identified four types of frequency–size curves, depending on the presence/absence of characteristic earthquakes and the presence or absence of a downward bend in the tail of the curve. This classification by the shape of the tail in frequency–size relationships correlates well with the values of the maximum observed magnitude. Thus, faults of the first type (there are characteristic earthquakes, but no downward bend) with Mmax ≥ 8.0 are classified as posing the highest seismic hazard; faults with characteristic earthquakes and a bend, and with Mmax = 7.5–7.9, are treated as rather hazardous; faults of the third type with Mmax = 7.1–7.5 are treated as posing potential hazard; and lastly, faults with a bend, without characteristic earthquakes, and with a typical magnitude Mmax ≤ 7.0, are classified as involving little hazard. The tail types in frequency–size curves are interpreted using the model of a nonlinear multiplicative cascade. The model can be used to treat different tail types as corresponding to the occurrence/nonoccurrence of nonlinear positive and negative feedback in earthquake rupture zones, with this feedback being responsible for the occurrence of earthquakes with different magnitudes. This interpretation and clustering of earthquake-generating faults by the behavior the tail of the relevant frequency–size plot shows raises the question about the physical mechanisms that underlie this behavior. We think that the occurrence of great earthquakes is related to a decrease in effective strength (viscosity) in the interblock space of faults at a scale appropriate to the rupture zone size.  相似文献   

3.
A great earthquake of M S=8.1 took place in the west of Kunlun Pass on November 14, 2001. The epicenter is located at 36.2°N and 90.9°E. The analysis shows that some main precursory seismic patterns appear before the great earthquake, e.g., seismic gap, seismic band, increased activity, seismicity quiet and swarm activity. The evolution of the seismic patterns before the earthquake of M S=8.1 exhibits a course very similar to that found for earthquake cases with M S≥7. The difference is that anomalous seismicity before the earthquake of M S=8.1 involves in the larger area coverage and higher seismic magnitude. This provides an evidence for recognizing precursor and forecasting of very large earthquake. Finally, we review the rough prediction of the great earthquake and discuss some problems related to the prediction of great earthquakes.  相似文献   

4.
The Reviewed Event Bulletin (REB) of the International Data Center (IDC) has been used in order to investigate the seismicity of the Northwest Himalaya and its neighboring region for the time period June 1999 to March 2015 within the geographical coordinates 25–40° N latitude and 65–85° E longitude. We have used a very precisely located earthquake dataset recorded by the International Monitoring System (IMS) Network containing 7,583 events with body wave magnitudes from 2.5 to 6.3. The study area has been subdivided into six regions based on the Flinn-Engdahl (F-E) seismic and geographical regionalization scheme, which was used as the region classifications of the International Data Center catalog. The examined region includes NW India, Pakistan, Nepal, Xizang, Kashmir, and Hindukush. For each region, Magnitudes of completeness (Mc) and Gutenberg-Richter (GR) recurrence parameters (a and b values) have been estimated. The Gutenberg-Richter analysis is preceded by an overview of the seismotectonics of the study area. The obtained Mc values vary from 3.5 to 3.9. The lower value of Mc was found mainly in Xizang region whereas the higher Mc threshold is evident in Pakistan region. However, the b values vary from 1.19 to 1.48. The lowest b value is recorded in Xizang region, which is mostly related to the Main Karakoram Thrust (MKT) fault, whereas the highest b values are recorded in NW India and Kashmir regions, which are mostly related to the Main Frontal Thrust (MFT) fault. The REB for the selected period has been compared to the most renowned bulletin of global seismicity, namely that issued by the National Earthquake Information Center (NEIC) of the United States Geological Survey (USGS). A study of 4,821 events recorded by USGS in the study region indicates that about 36 % of seismic events were missed and the catalog is considered as complete for events with magnitudes ≥4.0. However, both a and b values are obviously higher than those of IMS catalog. The a and b parameters in the Gutenberg-Richter magnitude–frequency relationship have been utilized to forecast the probability of future earthquakes of different magnitudes and returned periods (recurrence intervals).  相似文献   

5.
Spatial and temporal evolution of the stress field in the seismically active and well-monitored area of the western Gulf of Corinth, Greece, is investigated. The highly accurate and vast regional catalogues were used for inverting seismicity rate changes into stress variation using a rate/state-dependent friction model. After explicitly determining the physical quantities incorporated in the model (characteristic relaxation time, fault constitutive parameters, and reference seismicity rates), we looked for stress changes across space and over time and their possible association with earthquake clustering and fault interactions. We focused our attention on the Efpalio doublet of January 2010 (M = 5.5 and M = 5.4), with a high aftershock productivity, and attempted to reproduce and interpret stress changes prior to and after the initiation of this seismicity burst. The spatial distribution of stress changes was evaluated after smoothing the seismological data by means of a probability density function (PDF). The inverted stress calculations were compared with the calculations derived from an independent approach (elastic dislocation model) and this comparison was quantified. The results of the two methods are in good agreement (up to 80 %) in the far field, with the inversion technique providing more robust results in the near field, where they are more sensitive to the uncertainties of coseismic slip distribution. It is worth mentioning that the stress inversion model proved to be a very sensitive stress meter, able to detect even small stress changes correlated with spatio–temporal earthquake clustering. Data analysis was attempted from 1975 onwards to simulate the stress changes associated with stronger earthquakes over a longer time span. This approach revealed that only M > 5.5 events induce considerable stress variations, although in some cases there was no evidence for such stress changes even after an M > 5.5 earthquake.  相似文献   

6.
To study the prospective areas of upcoming strong-to-major earthquakes, i.e., M w  ≥ 6.0, a catalog of seismicity in the vicinity of the Thailand-Laos-Myanmar border region was generated and then investigated statistically. Based on the successful investigations of previous works, the seismicity rate change (Z value) technique was applied in this study. According to the completeness earthquake dataset, eight available case studies of strong-to-major earthquakes were investigated retrospectively. After iterative tests of the characteristic parameters concerning the number of earthquakes (N) and time window (T w ), the values of 50 and 1.2 years, respectively, were found to reveal an anomalous high Z-value peak (seismic quiescence) prior to the occurrence of six out of the eight major earthquake events studied. In addition, the location of the Z-value anomalies conformed fairly well to the epicenters of those earthquakes. Based on the investigation of correlation coefficient and the stochastic test of the Z values, the parameters used here (N = 50 events and T w  = 1.2 years) were suitable to determine the precursory Z value and not random phenomena. The Z values of this study and the frequency-magnitude distribution b values of a previous work both highlighted the same prospective areas that might generate an upcoming major earthquake: (i) some areas in the northern part of Laos and (ii) the eastern part of Myanmar.  相似文献   

7.
--It has been argued that power-law time-to-failure fits for cumulative Benioff strain and an evolution in size-frequency statistics in the lead-up to large earthquakes are evidence that the crust behaves as a Critical Point (CP) system. If so, intermediate-term earthquake prediction is possible. However, this hypothesis has not been proven. If the crust does behave as a CP system, stress correlation lengths should grow in the lead-up to large events through the action of small to moderate ruptures and drop sharply once a large event occurs. However this evolution in stress correlation lengths cannot be observed directly. Here we show, using the lattice solid model to describe discontinuous elasto-dynamic systems subjected to shear and compression, that it is for possible correlation lengths to exhibit CP-type evolution. In the case of a granular system subjected to shear, this evolution occurs in the lead-up to the largest event and is accompanied by an increasing rate of moderate-sized events and power-law acceleration of Benioff strain release. In the case of an intact sample system subjected to compression, the evolution occurs only after a mature fracture system has developed. The results support the existence of a physical mechanism for intermediate-term earthquake forecasting and suggest this mechanism is fault-system dependent. This offers an explanation of why accelerating Benioff strain release is not observed prior to all large earthquakes. The results prove the existence of an underlying evolution in discontinuous elasto-dynamic systems which is capable of providing a basis for forecasting catastrophic failure and earthquakes.  相似文献   

8.
The regularities in the radiation and propagation of seismic waves in the regions of the North Caucasus are analyzed for estimating the ground motion parameters during the probable future strong earthquakes. Based on the records of the regional earthquakes with magnitudes MW ~ 3.9–5.6 within epicentral distances up to ~300 km obtained during the period of digital measurements at the Sochi and Anapa seismic stations, the Q-factors in the vicinities of these sites are estimated at ~55 f0.9 and ~90f0.7, respectively. The estimates were obtained by the coda normalization method developed by Aki, Rautian, and other authors. This method is based on the phenomenon of suppression of the earthquake (source) effects and local (site) responses by coda waves in the S-wave spectra. The obtained Q-factor estimates can be used for forecasting the ground shaking parameters for the future probable strong earthquakes in the North Caucasus in the vicinities of Sochi and Anapa.  相似文献   

9.
The purpose of this work is to define a seismic regionalization of Mexico for seismic hazard and risk analyses. This seismic regionalization is based on seismic, geologic, and tectonic characteristics. To this end, a seismic catalog was compiled using the more reliable sources available. The catalog was made homogeneous in magnitude in order to avoid the differences in the way this parameter is reported by various agencies. Instead of using a linear regression to converts from m b and M d to M s or M w , using only events for which estimates of both magnitudes are available (i.e., paired data), we used the frequency-magnitude relations relying on the a and b values of the Gutenberg-Richter relation. The seismic regions are divided into three main categories: seismicity associated with the subduction process along the Pacific coast of Mexico, in-slab events within the down-going COC and RIV plates, and crustal seismicity associated to various geologic and tectonic regions. In total, 18 seismic regions were identified and delimited. For each, the a and b values of the Gutenberg-Richter relation were determined using a maximum likelihood estimation. The a and b parameters were repeatedly estimated as a function of time for each region, in order to confirm their reliability and stability. The recurrence times predicted by the resulting Gutenberg-Richter relations obtained are compared with the observed recurrence times of the larger events in each region of both historical and instrumental earthquakes.  相似文献   

10.
— It has been shown in CA simulations and data analysis of earthquakes that declustered or characteristic large earthquakes may occur with long-range stress redistribution. In order to understand long-range stress redistribution, we propose a linear-elastic but heterogeneous-brittle model. The stress redistribution in the heterogeneous-brittle medium implies a longer-range interaction than that in an elastic medium. Therefore, it is surmised that the longer-range stress redistribution resulting from damage in heterogeneous media may be a plausible mechanism governing main shocks.  相似文献   

11.
人工地震目录模拟是改进现有地震目录不完备性、弥补大地震记录稀缺,以及完善地震学相关研究的有效途径之一。本文基于地震活动的泊松分布模型、古登堡-里克特震级-频度关系,利用能较逼真描述具有随机性质事物特点及物理实验过程的蒙特卡洛方法,模拟汾渭地震带未来30、50、100年等不同时长的地震目录,并对其进行统计检验。分析表明,模拟地震目录符合设定的地震活动性参数和泊松分布假设特征。依据模拟地震目录,对未来该区域地震趋势进行了分析,以期为地震危险性分析提供参考。  相似文献   

12.
The study of the Gutenberg-Richter (GR) parameters a and b has been very important to describe and characterize the seismicity over the different seismic provinces around the world. As far as we know, the possible correlation between the GR parameters a and b has not received enough attention. Bayrak et al. reported the a and b values for 27 active seismic regions around the boundaries of the main tectonic plates of the world. From these data, we found that there exists a positive correlation between the a and b parameters (R =?0.85, R2 =?0.72). On the other hand, we made around 150 computer runs of a spring-block model proposed by Olami et al. (Phys Rev Lett 68(8):1244–1247, 1992). This model roughly emulates the interaction between two fault planes and it reaches a self-organized critical state. With these simulations, we also found that the a and b parameters are positively correlated. Motivated by these results, we propose an analytical demonstration that indeed a and b are positively correlated. In addition, we discuss on other possible applications of the spring-block model to actual seismicity and to frictional experiments made with sandpapers.  相似文献   

13.
Long-term seismic activity prior to the December 26, 2004, off the west coast of northern Sumatra, Indonesia, M W=9.0 earthquake was investigated using the Harvard CMT catalogue. It is observed that before this great earthquake, there exists an accelerating moment release (AMR) process with the temporal scale of a quarter century and the spatial scale of 1 500 km. Within this spatial range, the M W=9.0 event falls into the piece-wise power-law-like frequency-magnitude distribution. Therefore, in the perspective of the critical-point-like model of earthquake preparation, the failure to forecast/predict the approaching and/or the size of this earthquake is not due to the physically intrinsic unpredictability of earthquakes.  相似文献   

14.
This work presents at attempt to model brittle ruptures and slips in a continental plate and its spontaneous organization by repeated earthquakes in terms of coarse-grained properties of the mechanical plate. A statistical physics model, which simulates anti-plane shear deformation of a thin plate with inhomogeneous elastic properties, is thus analyzed theoretically and numerically in order to study the spatio-temporal evolution of rupture patterns in response to a constant applied strain rate at its borders, mimicking the effect of neighboring plates. Rupture occurs when the local stress reaches a threshold value. Broken elements are instantaneously healed and retain the original material properties, enabling the occurrence of recurrent earthquakes. Extending previous works (Cowie et al., 1993;Miltenberger et al., 1993), we present a study of the most startling feature of this model which is that ruptures become strongly correlated in space and time leading to the spontaneous development of multifractal structures and gradually accumulate large displacements. The formation of the structures and the temporal variation of rupture activity is due to a complex interplay between the random structure, long-range elastic interactions and the threshold nature of rupture physics. The spontaneous formation of fractal fault structures by repeated earthquakes is mirrored at short times by the spatio-temporal chaotic dynamics of earthquakes, well-described by a Gutenberg-Richter power law. We also show that the fault structures can be understood as pure geometrical objects, namely minimal manifolds, which in two dimensions correspond to the random directed polymer (RDP) problem. This mapping allows us to use the results of many studies on the RDP in the field of statistical physics, where it is an exact result that the minimal random manifolds in 2D systems are self-affine with a roughness exponent 2/3. We also present results pertaining to the influence of the degree of stress release per earthquake on the competition between faults. Our results provide a rigorous framework from which to initiate rationalization of many, reported fractal fault studies.  相似文献   

15.
It is a common opinion that only crustal earthquakes can occur in the Crimea–Black Sea region. Since the existence of deep earthquakes in the Crimea–Black Sea region is extremely important for the construction of a geodynamic model for this region, an attempt is made to verify the validity of this widespread view. To do this, the coordinates of all earthquakes recorded by the stations of the Crimean seismological network are reinterpreted with an algorithm developed by one of the authors. The data published in the seismological catalogs and bulletins of the Crimea–Black Sea region for 1970–2012 are used for the analysis. To refine the coordinates of hypocenters of earthquakes in the Crimea–Black Sea region, in addition to the data from stations of the Crimean seismological network, information from seismic stations located around the Black Sea coast are used. In total, the data from 61 seismic stations were used to determine the hypocenter coordinates. The used earthquake catalogs for 1970–2012 contain information on ~2140 events with magnitudes from–1.5 to 5.5. The bulletins provide information on the arrival times of P- and S-waves at seismic stations for 1988 events recorded by three or more stations. The principal innovation of this study is the use of the original author’s hypocenter determination algorithm, which minimizes the functional of distances between the points (X, Y, H) and (x, y, h) corresponding to the theoretical and observed seismic wave travel times from the earthquake source to the recording stations. The determination of the coordinates of earthquake hypocenters is much more stable in this case than the usual minimization of the residual functional for the arrival time of an earthquake wave at a station (the difference between the theoretical and observed values). Since determination of the hypocenter coordinates can be influenced by the chosen velocity column beneath each station, special attention is focused on collecting information on velocity profiles. To evaluate the influence of the upper mantle on the results of calculating the velocity model, two different low-velocity and high-velocity models are used; the results are compared with each other. Both velocity models are set to a depth of 640 km, which is fundamentally important in determining hypocenters for deep earthquakes. Studies of the Crimea–Black Sea region have revealed more than 70 earthquakes with a source depth of more than 60 km. The adequacy of the obtained depth values is confirmed by the results of comparing the initial experimental data from the bulletins with the theoretical travel-time curves for earthquake sources with depths of 50 and 200 km. The sources of deep earthquakes found in the Crimea–Black Sea region significantly change our understanding of the structure and geotectonics of this region.  相似文献   

16.
The data from seismic stations of the Arkhangelsk network and the networks in the neighboring territories are analyzed for refining the focal parameters of the tectonic earthquakes recorded in the north of the Russian plate on October 22, 2005 (M = 2.9) and March 28, 2013 (M = 3.4). The epicenters of the earthquakes are confined to the large NW–SE striking faults which border the Arkhangelsk bulge starting from the Kara–Pinega rift in the northeast and Onega–Kandalaksha paleorift in the southwest. The calculated focal mechanism of the earthquake of March 28, 2013 agrees with the distribution of neotectonic stresses characteristic of the north of the Russian plate, and specifically, with the submeridional compression and sublatitudinal extension.  相似文献   

17.
On August 8, 2017, a M7.0 earthquake occurred in Jiuzhaigou County, Sichuan Province, China, resulting in significant casualties and property damage. Therefore, it is critical to identify the areas of potential aftershocks before reconstruction and re-settling people to avoid future disasters. Based on the elastic dislocation theory and a multi-layered lithospheric model, we calculate the Coulomb failure stress changes caused by the Wenchuan and Jiuzhaigou earthquakes, discuss the relationship between the Mw7.9 Wenchuan and M7.0 Jiuzhaigou earthquakes, and analyze the influence of the aftershock distribution and stress changes on the major faults in this region caused by the Jiuzhaigou earthquake. The co- and post-seismic stress changes caused by the Wenchuan earthquake significantly increased the stress accumulation at the hypocenter of the Jiuzhaigou earthquake. Therefore, the occurrence of the Jiuzhaigou earthquake was probably stimulated by the Wenchuan earthquake. The aftershock distribution is well explained by the co-seismic stress changes of the Jiuzhaigou earthquake. The stress accumulation and corresponding seismic hazard on the Maqu-Heye segment of the East Kunlun fault and the northern extremity of the Huya fault has been further increased by the Jiuzhaigou earthquake.  相似文献   

18.
We continue applying the general concept of seismic risk analysis in a number of seismic regions worldwide by constructing regional seismic hazard maps based on morphostructural analysis, pattern recognition, and the Unified Scaling Law for Earthquakes (USLE), which generalizes the Gutenberg-Richter relationship making use of naturally fractal distribution of earthquake sources of different size in a seismic region. The USLE stands for an empirical relationship log10N(M, L)?=?A?+?B·(5 – M)?+?C·log10L, where N(M, L) is the expected annual number of earthquakes of a certain magnitude M within a seismically prone area of linear dimension L. We use parameters A, B, and C of USLE to estimate, first, the expected maximum magnitude in a time interval at seismically prone nodes of the morphostructural scheme of the region under study, then map the corresponding expected ground shaking parameters (e.g., peak ground acceleration, PGA, or macro-seismic intensity). After a rigorous verification against the available seismic evidences in the past (usually, the observed instrumental PGA or the historically reported macro-seismic intensity), such a seismic hazard map is used to generate maps of specific earthquake risks for population, cities, and infrastructures (e.g., those based on census of population, buildings inventory). The methodology of seismic hazard and risk assessment is illustrated by application to the territory of Greater Caucasus and Crimea.  相似文献   

19.
One of the crucial components in seismic hazard analysis is the estimation of the maximum earthquake magnitude and associated uncertainty. In the present study, the uncertainty related to the maximum expected magnitude μ is determined in terms of confidence intervals for an imposed level of confidence. Previous work by Salamat et al. (Pure Appl Geophys 174:763-777, 2017) shows the divergence of the confidence interval of the maximum possible magnitude mmax for high levels of confidence in six seismotectonic zones of Iran. In this work, the maximum expected earthquake magnitude μ is calculated in a predefined finite time interval and imposed level of confidence. For this, we use a conceptual model based on a doubly truncated Gutenberg-Richter law for magnitudes with constant b-value and calculate the posterior distribution of μ for the time interval Tf in future. We assume a stationary Poisson process in time and a Gutenberg-Richter relation for magnitudes. The upper bound of the magnitude confidence interval is calculated for different time intervals of 30, 50, and 100 years and imposed levels of confidence α?=?0.5, 0.1, 0.05, and 0.01. The posterior distribution of waiting times Tf to the next earthquake with a given magnitude equal to 6.5, 7.0, and 7.5 are calculated in each zone. In order to find the influence of declustering, we use the original and declustered version of the catalog. The earthquake catalog of the territory of Iran and surroundings are subdivided into six seismotectonic zones Alborz, Azerbaijan, Central Iran, Zagros, Kopet Dagh, and Makran. We assume the maximum possible magnitude mmax?=?8.5 and calculate the upper bound of the confidence interval of μ in each zone. The results indicate that for short time intervals equal to 30 and 50 years and imposed levels of confidence 1???α?=?0.95 and 0.90, the probability distribution of μ is around μ?=?7.16???8.23 in all seismic zones.  相似文献   

20.
We established a three-dimensional finite element model of the Anninghe-Zemuhe-Xiaojiang faults region using contact surfaces of different sizes to describe the spatial segmentation characteristics of the faults. Our model is based on constraints from GPS observations, models of the crust and upper mantle, precise earthquake locations, the tectonic stress field, the slip rate of the faults, and the rheology of the lithosphere in the Sichuan-Yunnan area. Considering the influence of strong earthquakes since A.D. 1327, we analyzed the main controlling factors of the characteristics of the strong earthquakes and also studied by numerical simulation the possible areas of future earthquake risk and their relationship with tectonic stress. The numerical results showed that the gravitational potential energy of the Qinghai-Tibet Plateau and the interaction of adjacent blocks are the main kinetic factors affecting the characteristics of the tectonic stress distribution. There appears to be some correspondence between the distribution of tectonic stress and the b value; however, we also found that some low b value locations correspond to regions of lower stress. This contradiction may be the result of some comprehensive factors, such as the release of strain energy caused by strong earthquakes.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号