共查询到20条相似文献，搜索用时 406 毫秒
1.
《Sedimentology》2018,65(1):62-95
Despite advances in estuarine facies models, ancient bayhead delta deposits are not widely recognized or utilized, and their facies characteristics are poorly documented. Sedimentology of three well‐exposed, bayhead delta deposits within the well‐known stratigraphic framework of the Book Cliffs, Utah, and comparison to modern bayhead deltas provide insight into their variability, and a model for reservoir prediction. Bayhead deltas develop at the innermost part of bays within wave‐dominated and mixed‐energy estuaries on transgressive coastlines. The deposits of these deltas are valuable because they record the high‐frequency turnaround from transgression to regression; in turn, this delineates the long‐term transgression trajectory and informs reservoir prediction. This study uses outcrop data and synthesis of modern bayhead delta characteristics to define criteria for bayhead delta recognition, develop a detailed facies model and highlight their utility in a regional context. The following criteria for bayhead delta identification are proposed herein: (i) overall coarsening‐up pattern; (ii) small‐scale clinoform (5 to 15 m height; 100 to 1000 m length) showing a down‐clinoform decrease in grain size and palaeocurrent energy; (iii) increasing abundance of mud interbeds towards the clinoform toe; (iv) basinward‐directed palaeocurrents generated mainly by fluvial input with strong tidal overprint; (v) greatest tidal influence in the intertidal zone of the inactive delta front and better preservation of turbidites at clinoform toes; (vi) brackish trace and body fossils; and (vii) position within an overall backstepping stratigraphic succession. Ancient bayhead deltas described in this study are situated within a moderately rising to flatly rising transgressive interval over a 300 km transect. Steeply rising transgressive trajectories sequester sandy, thicker, better connected transgressive deposits in the inner part of the estuary where bayhead deltas tend to stack vertically. Flatter transgressive trajectories sequester sand in disparate, disconnected estuarine sandstone bodies with partial preservation of bayhead deltas. Proposed criteria aid recognition of bayhead delta deposits in other basins to reconstruct transgressive shoreline trajectories that inform reservoir models and volumetrics. 相似文献
2.
《Boreas: An International Journal of Quaternary Research》2018,47(4):973-1002
This study presents a synthesis of the geomorphology, facies variability and depositional architecture of ice‐marginal deltas affected by rapid lake‐level change. The integration of digital elevation models, outcrop, borehole, ground‐penetrating radar and high‐resolution shear‐wave seismic data allows for a comprehensive analysis of these delta systems and provides information about the distinct types of deltaic facies and geometries generated under different lake‐level trends. The exposed delta sediments record mainly the phase of maximum lake level and subsequent lake drainage. The stair‐stepped profiles of the delta systems reflect the progressive basinward lobe deposition during forced regression when the lakes successively drained. Depending on the rate and magnitude of lake‐level fall, fan‐shaped, lobate or more digitate tongue‐like delta morphologies developed. Deposits of the stair‐stepped transgressive delta bodies are buried, downlapped and onlapped by the younger forced regressive deposits. The delta styles comprise both Gilbert‐type deltas and shoal‐water deltas. The sedimentary facies of the steep Gilbert‐type delta foresets include a wide range of gravity‐flow deposits. Delta deposits of the forced‐regressive phase are commonly dominated by coarse‐grained debrisflow deposits, indicating strong upslope erosion and cannibalization of older delta deposits. Deposits of supercritical turbidity currents are particularly common in sand‐rich Gilbert‐type deltas that formed during slow rises in lake level and during highstands. Foreset beds consist typically of laterally and vertically stacked deposits of antidunes and cyclic steps. The trigger mechanisms for these supercritical turbidity currents were both hyperpycnal meltwater flows and slope‐failure events. Shoal‐water deltas formed at low water depths during both low rates of lake‐level rise and forced regression. Deposition occurred from tractional flows. Transgressive mouthbars form laterally extensive sand‐rich delta bodies with a digitate, multi‐tongue morphology. In contrast, forced regressive gravelly shoal‐water deltas show a high dispersion of flow directions and form laterally overlapping delta lobes. Deformation structures in the forced‐regressive ice‐marginal deltas are mainly extensional features, including normal faults, small graben or half‐graben structures and shear‐deformation bands, which are related to gravitational delta tectonics, postglacial faulting during glacial‐isostatic adjustment, and crestal collapse above salt domes. A neotectonic component cannot be ruled out in some cases. 相似文献
3.
EDWIN ROBERT SCHOMACKER AUDUN VESTHEIM KJEMPERUD JOHAN PETTER NYSTUEN JENS SIGURD JAHREN 《Sedimentology》2010,57(4):1069-1087
Sandstone bodies in the Sunnyside Delta Interval of the Eocene Green River Formation, Uinta Basin, previously considered as point bars formed in meandering rivers and other types of fluvial bars, are herein interpreted as delta mouth‐bar deposits. The sandstone bodies have been examined in a 2300 m long cliff section along the Argyle and Nine Mile Canyons at the southern margin of the Uinta lake basin. The sandstone bodies occur in three stratigraphic intervals, separated by lacustrine mudstone and limestone. Together these stratigraphic intervals form a regressive‐transgressive sequence. Individual sandstone bodies are texturally sharp‐based towards mudstone substratum. In proximal parts, the mouth‐bar deposits only contain sandstone, whereas in frontal and lateral positions mudstone drapes separate mouth‐bar clinothems. The clinothems pass gradually into greenish‐grey lacustrine mudstone at their toes. Horizontally bedded or laminated lacustrine mudstone onlaps the convex‐upward sandstone bars. The mouth‐bar deposits are connected to terminal distributary channel deposits. Together, these mouth‐bar/channel sandstone bodies accumulated from unidirectional jet flow during three stages of delta advance, separated by lacustrine flooding intervals. Key criteria to distinguish the mouth‐bar deposits from fluvial point bar deposits are: (i) geometry; (ii) bounding contacts; (iii) internal structure; (iv) palaeocurrent orientations; and (v) the genetic association of the deposits with lacustrine mudstone and limestone. 相似文献
4.
Clinoform geometry,geomorphology, facies character and stratigraphic architecture of a sand‐rich subaqueous delta: Jurassic Sognefjord Formation,offshore Norway 
下载免费PDF全文
下载免费PDF全文 Stefano Patruno Gary J. Hampson Christopher A.‐L. Jackson Tom Dreyer 《Sedimentology》2015,62(1):350-388
The integration of core sedimentology, seismic stratigraphy and seismic geomorphology has enabled interpretation of delta‐scale (i.e. tens of metres high) subaqueous clinoforms in the upper Jurassic Sognefjord Formation of the Troll Field. Mud‐prone subaqueous deltas characterized by a compound clinoform morphology and sandy delta‐scale subaqueous clinoforms are common in recent tide‐influenced, wave‐influenced and current‐influenced settings, but ancient examples are virtually unknown. The data presented help to fully comprehend the criteria for the recognition of other ancient delta‐scale subaqueous clinoforms, as well as refining the depositional model of the reservoir in the super‐giant Troll hydrocarbon field. Two 10 to 60 m thick, overall coarsening‐upward packages are distinguished in the lower Sognefjord Formation. Progressively higher energy, wave‐dominated or current‐dominated facies occur from the base to the top of each package. Each package corresponds to a set of seismically resolved, westerly dipping clinoforms, the bounding surfaces of which form the seismic ‘envelope’ of a clinoform set and the major marine flooding surfaces recognized in cores. The packages thicken westwards, until they reach a maximum where the clinoform ‘envelope’ rolls over to define a topset–foreset–toeset geometry. All clinoforms are consistently oriented sub‐parallel to the edge of the Horda Platform (N005–N030). In the eastern half of the field, individual foresets are relatively gently dipping (1° to 6°) and bound thin (10 to 30 m) clinothems. Core data indicate that these proximal clinothems are dominated by fine‐grained, hummocky cross‐stratified sandstones. Towards the west, clinoforms gradually become steeper (5° to 14°) and bound thicker (15 to 60 m) clinothems that comprise medium‐grained, cross‐bedded sandstones. Topsets are consistently well‐developed, except in the westernmost area. No seismic or sedimentological evidence of subaerial exposure is observed. Deposition created fully subaqueous, near‐linear clinoforms that prograded westwards across the Horda Platform. Subaqueous clinoforms were probably fed by a river outlet in the north‐east and sculpted by the action of currents sub‐parallel to the clinoform strike. 相似文献
5.
6.
Abraham Zelilidis 《Geological Journal》2003,38(1):31-46
The sediment distribution in three narrow, linear basins, two modern and one ancient, in Greece and Italy, was studied and related to changes in basin configuration. The basins are the Plio‐Quaternary Patras–Corinth graben, the Pliocene–Quaternary Reggio–Scilla graben and the middle Tertiary Mesohellenic piggy‐back basin. These basins were formed at different times and under different geodynamic conditions, but in each case, the tectonic evolution produced a narrow area in the basin where the water depth decreased dramatically, forming a strait with a sill. This strait divided the basin into major and minor sub‐basins, and the strait has a similar impact on sedimentary environments in all three basins, even though different depositional environments were formed along the initial basin axis. Predictions for the development of depositional environments in the two modern basins, especially in their straits, are based on the studied ancient basin. In the straits, powerful tidal flows will transport finer sediments to sub‐basins and trapezoidal‐type fan‐deltas will gradually fill up and choke the strait through time. In sub‐basins, according to basin depth, either deltaic (in the shallow minor sub‐basin) or turbiditic (in the deep major sub‐basin) deposits may accumulate. Moreover, an extensive shelf is likely to develop between the strait and major sub‐basin. This shelf will be cross‐cut by canyons and characterized by thin fine‐ to coarse‐grained deposits. These sediment models could be applied to analogous basin geometries around the world. Copyright © 2003 John Wiley & Sons, Ltd. 相似文献
7.
8.
The Middle Devonian Gauja Formation in the Devonian Baltic Basin preserves tide‐influenced delta plain and delta front deposits associated with a large southward prograding delta complex. The outcrops extend over 250 km from southern Estonia to southern Lithuania. The succession can be divided into 10 facies associations recording distributary channel belts that became progressively more tide influenced when traced southwards towards the palaeo‐shoreline, separated by muddy intra‐channel areas where deposition was characterized by crevasse splays, delta plain lakes, abandoned channel deposits and tidal gullies. Tidal currents influenced deposition over the entire delta plain, extending up to 250 km from the contemporary shoreline. Tidal facies on the upper delta plain differ from those on the lower delta plain and delta front. In the former case, deposition from river currents was only occasionally interrupted by tidal currents, e.g. during spring tides, resulting in mica and mudstone drapes, and distinctive graded cross‐stratification. The lower delta plain was dominated by tidal facies and tidal currents regularly influenced deposition. There was a change from progradation to aggradation from the lower to the upper part of the Gauja Formation coupled with a vertical decrease in tidal influence and a decrease in coarse‐grained sediment input. The Gauja Formation contrasts with established models for tide‐influenced deltas as the active delta plain was not restricted by topography. The shape of the delta plain, the predominant southward (basinward)‐directed palaeocurrents, and the thick sandstone succession, show that although tidal currents strongly influenced deposition at bed scale, rivers still controlled the overall morphology of the delta and the larger‐scale bedforms. In addition, there are no signs of wave influence, indicating very low wave energy in the basin. The widespread tidal influence in the Devonian Baltic Basin is explained by changes in the wider basin geometry and by local bathymetrical differences in the basin during progradation and aggradation of the delta plain, with changes in tidal efficiency accompanying the change in basin geometry produced by shoreline progradation. 相似文献
9.
在对柴达木盆地一里坪地区区域地质背景分析的基础上,根据录井岩屑描述、测井相分析和岩心观察,确定该区新近系发育冲积扇、河流-泛滥平原、扇三角洲、三角洲、湖泊等沉积相。应用录井和测井资料,编制出了地层厚度、砂岩含量、暗色泥岩含量、红色泥岩含量等值线图等基础图件。在此基础上编制出了上干柴沟组-狮子沟组4幅沉积相平面图。沉积相总体特征以滨浅湖沉积为主,而在研究区周缘则多发育河流泛滥平原、三角洲和扇三角洲沉积。这些图件动态地反映出沉积、沉降中心由西向东逐步迁移的过程。鸭参3井和落参1井区长期发育三角洲沉积,是研究区储集层发育最好的区块,也是下步勘探的重点地区。该研究对沉积相的精细研究具有一定的指导意义,对研究区的油气勘探也具有一定的参考意义。 相似文献
10.
The Early Miocene Bílina Palaeodelta consists of fluvio‐deltaic and lacustrine clastics deposited along the south‐eastern margin of the extensional Most Basin, part of the Eger Graben in north Bohemia (Czech Republic). The Bílina succession shows evidence of repeated advances of an axial deltaic system across a thick accumulation of organic material and clay in the hangingwall of an active fault. Exposures up to ca 4·5 km long in the Bílina open‐cast mine help bridge the gap between seismic scale and typical outcrop scale of observation and thus allow the relationships between small‐scale and basin‐scale stratal geometries to be evaluated. The Bílina Palaeodelta deposits include sand‐dominated, fluvial channel fills and heterolithic sheets interpreted as delta plain strata, sand‐dominated mouth‐bar wedges and heterolithic sheets of prodeltaic deposits, passing distally into lacustrine clays. The depositional environment is interpreted as a fluvial‐dominated, mixed‐load, lacustrine delta with a high degree of grain‐size segregation at the feeder‐channel mouths. On the largest temporal and spatial scales, variable tectonic subsidence controlled the overall advance and retreat of the delta system. The medium‐term transgressive‐regressive history was probably driven by episodes of increased subsidence rate. However, at this temporal scale, the architecture of the deltaic sequences (deltaic lobes and correlative lacustrine deposits) was strongly affected by: (i) compaction of underlying peat and clay which drove lateral offset stacking of medium‐term sequences; and (ii) growth of a fault‐propagation fold close to the active Bílina Fault. At the smallest scale, the geometries of individual mouth bars and groups of mouth bars (short‐term sequences) reflect the interaction among sediment loading, compaction and growth faulting that produced high‐frequency relative lake‐level fluctuations and created local accommodation at the delta front. 相似文献
11.
中国东部箕状断陷湖盆扇三角洲与辫状河三角洲对比研究 总被引：1，自引：0，他引：1
中国东部箕状断陷湖盆短轴方向,常常发育扇三角洲和辫状河三角洲,二者均可形成良好的油气储集体,但在岩芯以及地球物理资料的识别上常常容易混淆。通过对它们沉积特征、地球物理资料特征、含油气性和控制因素的对比研究和分析认为:扇三角洲是陡坡带冲积扇直接入湖形成,地震反射特征为楔形前积,沉积物成分成熟度和结构成熟度均低于辫状河三角洲,沉积特征反映重力流和牵引流双重作用;辫状河三角洲是缓坡带辫状河入湖形成的三角洲,向湖盆方向推进较远,地震反射特征为叠瓦前积,沉积特征反映牵引流作用。扇三角洲易形成构造-岩性油气藏和岩性油气藏,有利相带为扇三角洲前缘水下分流河道、席状砂以及前扇三角洲容易发育的滑塌浊积扇;辫状河三角洲易形成地层-岩性油气藏和岩性油气藏,有利相带为辫状河三角洲平原辫状分流河道,辫状河三角洲前缘水下分流河道、河口坝、席状砂以及半深湖中的浊积岩体。古气候变化、构造-古地貌以及湖平面变化速率三者共同作用于扇三角洲和辫状河三角洲的沉积特征,其中构造-古地貌是主控因素。结合二者沉积特征差异,建立了中国东部箕状断陷湖盆扇三角洲和辫状河三角洲沉积模式图,以期能对相似构造背景下扇三角洲和辫状河三角洲的分析与研究提供一定的指导作用。 相似文献
12.
The role of tidal,wave and river currents in the evolution of mixed‐energy deltas: Example from the Lajas Formation (Argentina) 下载免费PDF全文
下载免费PDF全文 Many modern deltas show complex morphologies and architectures related to the interplay of river, wave and tidal currents. However, methods for extracting the signature of the individual processes from the stratigraphic architecture are poorly developed. Through an analysis of facies, palaeocurrents and stratigraphic stacking patterns in the Jurassic Lajas Formation, this paper: (i) separates the signals of wave, tide and river currents; (ii) illustrates the result of strong tidal reworking in the distal reaches of deltaic systems; and (iii) discusses the implications of this reworking for the evolution of mixed‐energy systems and their reservoir heterogeneities. The Lajas Formation, a sand‐rich, shallow‐marine, mixed‐energy deltaic system in the Neuquén Basin of Argentina, previously defined as a tide‐dominated system, presents an exceptional example of process variability at different scales. Tidal signals are predominantly located in the delta front, the subaqueous platform and the distributary channel deposits. Tidal currents vigorously reworked the delta front during transgressions, producing intensely cross‐stratified, sheet‐like, sandstone units. In the subaqueous platform, described for the first time in an ancient outcrop example, the tidal reworking was confined within subtidal channels. The intensive tidal reworking in the distal reaches of the regressive delta front could not have been predicted from knowledge of the coeval proximal reaches of the regressive delta front. The wave signals occur mainly in the shelf or shoreface deposits. The fluvial signals increase in abundance proximally but are always mixed with the other processes. The Lajas system is an unusual clean‐water (i.e. very little mud is present in the system), sand‐rich deltaic system, very different from the majority of mud‐rich, modern tide‐influenced examples. The sand‐rich character is a combination of source proximity, syndepositional tectonic activity and strong tidal‐current reworking, which produced amalgamated sandstone bodies in the delta‐front area, and a final stratigraphic record very different from the simple coarsening‐upward trends of river‐dominated and wave‐dominated delta fronts. 相似文献
13.
A common facies observed in deep‐water slope and especially basin‐floor rocks of the Neoproterozoic Windermere Supergroup (British Columbia, Canada) is structureless, coarse‐tail graded, medium‐grained to coarse‐grained sandstone with from 30% to >50% mud matrix content (i.e. matrix‐rich). Bed contacts are commonly sharp, flat and loaded. Matrix‐rich sandstone beds typically form laterally continuous units that are up to several metres thick and several tens to hundreds of metres wide, and commonly adjacent to units of comparatively matrix‐poor, scour‐based sandstone beds with large tabular mudstone and sandstone clasts. Matrix‐rich units are common in proximal basin‐floor (Upper Kaza Group) deposits, but occur also in more distal basin‐floor (Middle Kaza Group) and slope (Isaac Formation) deposits. Regardless of stratigraphic setting, matrix‐rich units typically are directly and abruptly overlain by architectural elements comprising matrix‐poor coarse sandstone (i.e. channels and splays). Despite a number of similarities with previously described matrix‐rich beds in the literature, for example slurry beds, linked debrites and co‐genetic turbidites, a number of important differences exist, including the stratal make‐up of individual beds (for example, the lack of a clean sandstone turbidite base) and their stratigraphic occurrence (present throughout base of slope and basin‐floor strata, but most common in proximal lobe deposits) and accordingly suggest a different mode of emplacement. The matrix‐rich, poorly sorted nature of the beds and the abundance and size of tabular clasts in laterally equivalent sandstones imply intense upstream scouring, most probably related to significant erosion by an energetic plane‐wall jet or within a submerged hydraulic jump. Rapid energy loss coupled with rapid charging of the flow with fine‐grained sediment probably changed the rheology of the flow and promoted deposition along the margins of the jet. Moreover, these distinctive matrix‐rich strata are interpreted to represent the energetic initiation of the local sedimentary system, most probably caused by a local upflow avulsion. 相似文献
14.
Coarse‐grained deep‐water strata of the Cerro Toro Formation in the Cordillera Manuel Señoret, southern Chile, represent the deposits of a major channel belt (4 to 8 km wide by >100 km long) that occupied the foredeep of the Magallanes basin during the Late Cretaceous. Channel belt deposits comprise a ca 400 m thick conglomeratic interval (informally named the ‘Lago Sofia Member’) encased in bathyal fine‐grained units. Facies of the Lago Sofia Member include sandy matrix conglomerate (that show evidence of traction‐dominated deposition and sedimentation from turbulent gravity flows), muddy matrix conglomerate (graded units interpreted as coarse‐grained slurry‐flow deposits) and massive sandstone beds (high‐density turbidity current deposits). Interbedded sandstone and mudstone intervals are present locally, interpreted as inner levée deposits. The channel belt was characterized by a low sinuousity planform architecture, as inferred from outcrop mapping and extensive palaeocurrent measurements. Laterally adjacent to the Lago Sofia Member are interbedded mudstone and sandstone facies derived from gravity flows that spilled over the channel belt margin. A levée interpretation for these fine‐grained units is based on several observations, which include: (i) palaeocurrent measurements that indicate flows diverged (50° to 100°) once they spilled over the confining channel margin; (ii) sandstone beds progressively thin, away from the channel belt margin; (iii) evidence that the eroded channel base was not very well indurated, including a stepped margin and injection of coarse‐grained channel material into surrounding fine‐grained units; and (iv) the presence of sedimentary features common to levées, including slumped units inferring depositional slopes dipping away from the channel margin, lenticular sandstone beds thinning distally from the channel margin, soft sediment deformation and climbing ripples. The tectonic setting and foredeep architecture influenced deposition in the axial channel belt. A significant downstream constriction of the channel belt is reflected by a transition from more tabular units to an internal architecture dominated by lenticular beds associated with a substantially increased degree of scour. Differential propagation of the fold‐thrust belt from the west is speculated to have had a major control on basin, and subsequently channel, width. The confining influence of the basin slopes that paralleled the channel belt, as well as the likelihood that numerous conduits fed into the basin along the length of the active fold‐thrust belt to the west, suggest that proximal–distal relationships observed from large channels in passive margin settings are not necessarily applicable to axial channels in elongate basins. 相似文献
15.
Alexis Nutz Jean‐François Ghienne Mathieu Schuster Raphaël Certain Nicolas Robin Claude Roquin Olivier Raynal Frédéric Bouchette Philippe Duringer Pierre A. Cousineau 《Boreas: An International Journal of Quaternary Research》2014,43(2):309-329
The stratigraphy of the last deglaciation sequence is investigated in Lake Saint‐Jean (Québec Province, Canada) based on 300 km of echo‐sounder two dimensional seismic profiles. The sedimentary archive of this basin is documented from the Late Pleistocene Laurentidian ice‐front recession to the present‐day situation. Ten seismic units have been identified that reflect spatio‐temporal variations in depositional processes characterizing different periods of the Saint‐Jean basin evolution. During the postglacial marine flooding, a high deposition rate of mud settling, from proglacial glacimarine and then prodeltaic plumes in the Laflamme Gulf, produced an extensive, up to 50 m thick mud sheet draping the isostatically depressed marine basin floor. Subsequently, a closing of the water body due to glacio‐isostatic rebound occurred at 8.5 cal. ka BP, drastically modifying the hydrodynamics. Hyperpycnal flows appeared because fresh lake water replaced dense marine water. River sediments were transferred towards the deeper part of the lake into river‐related sediment drifts and confined lobes. The closing of the water body is also marked by the onset of a wind‐driven internal circulation associating coastal hydrodynamics and bottom currents with sedimentary features including shoreface deposits, sediment drifts and a prograding shelf‐type body. The fingerprints of a forced regression are well expressed by mouth‐bar systems and by the shoreface–shelf system, the latter unexpected in such a lacustrine setting. In both cases, a regressive surface of lacustrine erosion (RSLE) has been identified, separating sandy mouth‐bar from glaciomarine to prodeltaic muds, and sandy shoreface wedges from the heterolithic shelf‐type body, respectively. The Lake Saint‐Jean record is an example of a regressive succession driven by a glacio‐isostatic rebound and showing the transition from late‐glacial to post‐glacial depositional systems. 相似文献
16.
17.
Ramp sedimentation across a middle Albian,Arctic embayment: Influence of subsidence,eustasy and sediment supply on stratal architecture and facies distribution,Lower Cretaceous,Western Canada Foreland Basin 下载免费PDF全文
下载免费PDF全文 Robin A. Buckley A. Guy Plint Olivia A. Henderson Kathleen M. Vannelli 《Sedimentology》2016,63(3):699-742
Regional mapping of Middle Albian, shallow‐marine clastic strata over ca 100 000 km2 of the Western Canada Foreland Basin was undertaken to investigate the relationship between large‐scale stratal architecture and lithology. Results suggest that, over ca 5 Myr, stratal geometry and facies were dynamically linked to tectonic activity in the adjacent Cordillera. Higher frequency modulation of accommodation is most reasonably ascribed to eustasy. The Harmon and Cadotte alloformations were deposited at the southern end of an embayment of the Arctic Ocean. The Harmon alloformation, forming the lower part of the succession, constitutes a wedge of marine mudstone that thickens westward over 400 km from <5 m near the forebulge to >150 m in the foredeep. Constituent allomembers are also wedge‐shaped but lack distinct clinothems, a rollover point or downlapping geometry. Ubiquitous wave ripples indicate that the sea floor lay above storm wave base. Deposition took place on an extremely low‐gradient ramp, where accommodation was limited by effective wave base. Lobate, river‐dominated deltas fringed the southern margin of the basin. The largest deltas are stacked in the same area, suggesting protracted stability of the feeder river. A buried palaeo‐valley on the underlying sub‐Cretaceous unconformity may have influenced compaction and controlled river location for ca 3 Myr. Adjacent to the western Cordillera, a predominantly mudstone succession is interbedded with abundant storm beds of very fine‐grained sandstone and siltstone that reflect supply from the adjacent orogen. Bioturbation indices in the Harmon alloformation range from zero to six which reflects the influence of stressors related to river‐mouth proximity. Harmon alloformation mudstone grades abruptly upward into marine sandstone and conglomerate of the overlying Cadotte alloformation. The Cadotte is composed of three allomembers ‘CA’ to ‘CC’, that represent the deposits of prograding strandplains 200 × 300 km in extent. Allomembers ‘CA’ and ‘CB’ are strongly sandstone‐dominated, whereas allomember ‘CC’ contains abundant conglomerate in the west. The dominantly aggradational wedge of Harmon alloformation mudstone records flexural subsidence driven by active thickening in the adjacent orogen: the high accommodation rate trapped coarser clastic detritus close to the basin margin. In contrast, the tabular, highly progradational sandstone and conglomerate bodies of the Cadotte alloformation record a low subsidence rate, implying tectonic quiescence in the adjacent orogen. Erosional unloading of the orogen through Cadotte time steepened rivers to the extent that they delivered gravel to the shore. These observations support an ‘anti‐tectonic’ model of gravel supply proposed previously for the United States portion of the Cretaceous foreland basin. Because Cadotte allomembers do not thicken appreciably into the foredeep, accommodation changes that controlled these transgressive–regressive successions were probably of eustatic origin. 相似文献
18.
19.
The Bridport Sand Formation is an intensely bioturbated sandstone that represents part of a mixed siliciclastic‐carbonate shallow‐marine depositional system. At outcrop and in subsurface cores, conventional facies analysis was combined with ichnofabric analysis to identify facies successions bounded by a hierarchy of key stratigraphic surfaces. The geometry of these surfaces and the lateral relationships between the facies successions that they bound have been constrained locally using 3D seismic data. Facies analysis suggests that the Bridport Sand Formation represents progradation of a low‐energy, siliciclastic shoreface dominated by storm‐event beds reworked by bioturbation. The shoreface sandstones form the upper part of a thick (up to 200 m), steep (2–3°), mud‐dominated slope that extends into the underlying Down Cliff Clay. Clinoform surfaces representing the shoreface‐slope system are grouped into progradational sets. Each set contains clinoform surfaces arranged in a downstepping, offlapping manner that indicates forced‐regressive progradation, which was punctuated by flooding surfaces that are expressed in core and well‐log data. In proximal locations, progradational shoreface sandstones (corresponding to a clinoform set) are truncated by conglomerate lags containing clasts of bored, reworked shoreface sandstones, which are interpreted as marking sequence boundaries. In medial locations, progradational clinoform sets are overlain across an erosion surface by thin (<5 m) bioclastic limestones that record siliciclastic‐sediment starvation during transgression. Near the basin margins, these limestones are locally thick (>10 m) and overlie conglomerate lags at sequence boundaries. Sequence boundaries are thus interpreted as being amalgamated with overlying transgressive surfaces, to form composite erosion surfaces. In distal locations, oolitic ironstones that formed under conditions of extended physical reworking overlie composite sequence boundaries and transgressive surfaces. Over most of the Wessex Basin, clinoform sets (corresponding to high‐frequency sequences) are laterally offset, thus defining a low‐frequency sequence architecture characterized by high net siliciclastic sediment input and low net accommodation. Aggradational stacking of high‐frequency sequences occurs in fault‐bounded depocentres which had higher rates of localized tectonic subsidence. 相似文献
20.
Progradational and backstepping shoreface deposits in the Ladinian to Early Norian Snadd Formation of the Barents Sea 下载免费PDF全文
下载免费PDF全文 Tore G. Klausen Alf Ryseth William Helland‐Hansen Helge K. Gjelberg 《Sedimentology》2016,63(4):893-916
Shoreface sandstone deposits within the Early Carnian part of the Snadd Formation of the Norwegian Barents Sea can be traced for hundreds of kilometres in the depositional strike direction and for tens of kilometres in the depositional‐dip direction. This study uses three‐dimensional seismic attribute mapping and two‐dimensional regional seismic profiles to visualize the seismic facies of these shoreface deposits and to map their internal stratigraphic architecture at a regional scale. The shoreface deposits are generally elongate but show variable width from north‐east to south‐west, which corresponds to a sediment source in the northern part of the basin and a southward decrease in longshore sediment transport. The Snadd Formation presents an example of how large‐scale progradational shoreface deposits develop. The linear nature of its shoreface deposits contrasts with more irregular, cuspate wave‐dominated deltaic shorelines that contain river outlets, and instead implies longshore drift as the main sediment source. In map view, discrete sets of linear features bounded by truncation surfaces scale directly to beach ridge sets in modern counterparts. The shoreface deposits studied here are characteristic in terms of scale and basin‐wide continuity, and offer insight into the contrast between shallow marine deposition under stable Triassic Greenhouse and fluctuating Holocene Icehouse climates. Findings presented herein are also important for hydrocarbon exploration in the Barents Sea, because they describe a hitherto poorly understood reservoir play in the Triassic interval, wherein the most prominent reservoir plays have so far been considered to be found in channelized deposits in net‐progradational delta‐plain strata that form the topsets to shelf‐edge clinoforms. The documented presence of widespread wave‐dominated shoreface deposits also has implications for how the relative importance of different sedimentary processes is considered within the basin during this period. 相似文献