首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 51 毫秒
1.
The mode of channel‐bend transformation (i.e. expansion, translation, rotation or a combination thereof) has a direct bearing on the dimensions, shape, bedding architecture and connectivity of point‐bar sandstone bodies within a fluvial meander belt, but is generally difficult to recognize in vertical outcrops. This study demonstrates how the bend transformation mode and relative rate of channel‐floor aggradation can be deciphered from longitudinal outcrop sections aligned parallel to the meander‐belt axis, as a crucial methodological aid to the reconstruction of ancient fluvial systems and the development of outcrop analogue models for fluvial petroleum reservoirs. The study focuses on single‐storey and multi‐storey fluvial meander‐belt sandstone bodies in the Palaeogene piggyback Boyabat Basin of north‐central Turkey. The sandstone bodies are several hundred metres wide, 5 to 40 m thick and encased in muddy floodplain deposits. The individual channel‐belt storeys are 5 to 9 m thick and their transverse sections show lateral‐accretion bed packages representing point bars. Point bars in longitudinal sections are recognizable as broad mounds whose parts with downstream‐inclined, subhorizontal and upstream‐inclined bedding represent, respectively, the bar downstream, central and upstream parts. The inter‐bar channel thalweg is recognizable as the transition zone between adjacent point‐bar bedsets with opposing dip directions into or out of the outcrop section. The diverging or converging adjacent thalweg trajectories, or a trajectory migrating in up‐valley direction, indicate point‐bar broadening and hence channel‐bend expansion. A concurrent down‐valley migration of adjacent trajectories indicates channel‐bend translation. Bend rotation is recognizable from the replacement of a depositional riffle by an erosional pool zone or vice versa along the thalweg trajectory. The steepness of the thalweg trajectory reflects the relative rate of channel‐floor aggradation. This study discusses further how the late‐stage foreland tectonics, with its alternating pulses of uplift and subsidence and a progressive narrowing of the basin, has forced aggradation of fluvial channels and caused vertical stacking of meander belts.  相似文献   

2.
Many published interpretations of ancient fluvial systems have relied on observations of extensive outcrops of thick successions. This paper, in contrast, demonstrates that a regional understanding of palaeoriver kinematics, depositional setting and sedimentation rates can be interpreted from local sedimentological measurements of bedform and barform strata. Dune and bar strata, channel planform geometry and bed topography are measured within exhumed fluvial strata exposed as ridges in the Ruby Ranch Member of the Cretaceous Cedar Mountain Formation, Utah, USA. The ridges are composed of lithified stacked channel belts, representing at least five or six re-occupations of a single-strand channel. Lateral sections reveal well-preserved barforms constructed of subaqueous dune cross-sets. The topography of palaeobarforms is preserved along the top surface of the outcrops. Comparisons of the channel-belt centreline to local palaeotransport directions indicate that channel planform geometry was preserved through the re-occupations, rather than being obscured by lateral migration. Rapid avulsions preserved the state of the active channel bed and its individual bars at the time of abandonment. Inferred minimum sedimentation durations for the preserved elements, inferred from cross-set thickness distributions and assumed bedform migration rates, vary within a belt from one to ten days. Using only these local sedimentological measurements, the depositional setting is interpreted as a fluvial megafan, given the similarity in river kinematics. This paper provides a systematic methodology for the future synthesis of vertical and planview data, including the drone-equipped 2020 Mars Rover mission, to exhumed fluvial and deltaic strata.  相似文献   

3.
Although facies models of braided, meandering and anastomosing rivers have provided the cornerstones of fluvial sedimentology for several decades, the depositional processes and external controls on sheetflow fluvial systems remain poorly understood. Sheetflow fluvial systems represent a volumetrically significant part of the non‐marine sedimentary record and documented here are the lithofacies, depositional processes and possible roles of rapid subsidence and arid climate in generating a sheetflow‐dominated fluvial system in the Cenozoic hinterland of the central Andes. A 6500 m thick succession comprising the Late Eocene–Oligocene Potoco Formation is exposed continuously for >100 km along the eastern limb of the Corque syncline in the high Altiplano plateau of Bolivia. Fluvial sandstone and mudstone units were deposited over an extensive region (>10 000 km2) with remarkably few incised channels or stacked‐channel complexes. The Potoco succession provides an exceptional example of rapid production of accommodation sustained over a prolonged period of time in a non‐marine setting (>0·45 mm year−1 for 14 Myr). The lower ≈4000 m of the succession coarsens upward and consists of fine‐grained to medium‐grained sandstone, mudstone and gypsum deposits with palaeocurrent indicators demonstrating eastward transport. The upper 2500 m also coarsens upward, but contains mostly fine‐grained to medium‐grained sandstone that exhibits westward palaeoflow. Three facies associations were identified from the Potoco Formation and are interpreted to represent different depositional environments in a sheetflow‐dominated system. (i) Playa lake deposits confined to the lower 750 m are composed of interbedded gypsum, gypsiferous mudstone and sandstone. (ii) Floodplain deposits occur throughout the succession and include laterally extensive (>200 m) laminated to massive mudstone and horizontally stratified and ripple cross‐stratified sandstone. Pedogenic alteration and root casts are common. (iii) Poorly confined channel and unconfined sheet sandstone deposits include laterally continuous beds (50 to >200 m) that are defined primarily by horizontally stratified and ripple cross‐stratified sandstone encased in mudstone‐rich floodplain deposits. The ubiquitous thin‐sheet geometry and spatial distribution of individual facies within channel sandstone and floodplain deposits suggest that confined to unconfined, episodic (flash) flood events were the primary mode of deposition. The laterally extensive deposition and possible distributary nature of this sheetflow‐dominated system are attributed to fluvial fan conditions in an arid to semi‐arid, possibly seasonal, environment. High rates of sediment accumulation and tectonic subsidence during early Andean orogenesis may have favoured the development and long‐term maintenance of a sheetflow system rather than a braided, meandering or anastomosing fluvial style. It is suggested here that rapidly produced accommodation space and a relatively arid, seasonal climate are critical conditions promoting the generation of sheetflow‐dominated fluvial systems.  相似文献   

4.
This paper presents a model of facies distribution within a set of early Cretaceous, deep‐lacustrine, partially confined turbidite fans (Sea Lion Fan, Sea Lion North Fan and Otter Fan) in the North Falkland Basin, South Atlantic. As a whole, ancient deep‐lacustrine turbidite systems are under‐represented in the literature when compared with those documented in marine basins. Lacustrine turbidite systems can form extensive, good quality hydrocarbon reservoirs, making the understanding of such systems crucial to exploration within lacustrine basins. An integrated analysis of seismic cross‐sections, seismic amplitude extraction maps and 455 m of core has enabled the identification of a series of turbidite fans. The deposits of these fans have been separated into lobe axis, lobe fringe and lobe distal fringe settings. Seismic architectures, observed in the seismic amplitude extraction maps, are interpreted to represent geologically associated heterogeneities, including: feeder systems, terminal mouth lobes, flow deflection, sinuous lobe axis deposits, flow constriction and stranded lobe fringe areas. When found in combination, these architectures suggest ‘partial confinement’ of a system, something that appears to be a key feature in the lacustrine turbidite setting of the North Falkland Basin. Partial confinement of a system occurs when depositionally generated topography controls the flow‐pathway and deposition of subsequent turbidite fan deposits. The term ‘partial confinement’ provides an expression for categorising a system whose depositional boundaries are unconfined by the margins of the basin, yet exhibit evidence of internal confinement, primarily controlled by depositional topography. Understanding the controls that dictate partial confinement; and the resultant distribution of sand‐prone facies within deep‐lacustrine turbidite fans, is important, particularly considering their recent rise as hydrocarbon reservoirs in rift and failed‐rift settings.  相似文献   

5.
Basin‐scale models are required to interpret ancient continental sedimentary successions, and reduce uncertainty in assessing geological resources in basins. Recently, modern studies show distributive fluvial systems to comprise a substantial proportion of modern sedimentary basins, but their role in ancient basin fills has yet to be quantitatively documented at the basin scale. This study analysed key fluvial characteristics to construct a detailed basin‐wide model of the Palaeogene Fort Union and Willwood formations (Bighorn Basin, Wyoming), using observations from modern studies, and ancient system scale studies of distributive fluvial systems, to guide interpretations. Mapping showed these formations to be highly heterogeneous with channel‐body proportion (from 12 to 81%) and geometry types (large amalgamated bodies to isolated channels), grain size (silt to conglomerate), average channel‐body thickness (4 to 20 m) and average storey thickness (3 to 10 m) varying significantly across the basin. Distributive fluvial systems in the form of alluvial and fluvial fans in transverse configurations were recognized as well as a wide axial system, with heterogeneity in the formations being closely aligned to these interpretations. Furthermore, numerous individual depositional systems were identified within the formations (Beartooth Absaroka, Washakie, Owl Creek and axial). Predicted downstream distributive fluvial system trends (i.e. downstream decrease in channel proportion, size and grain size) were identified in the Beartooth, Absaroka and Owl Creek systems. However, predicted trends were not identified in the Washakie system where intrabasinal thrusting disturbed the sequence. Importantly, a wide axial fluvial system was identified, where reverse downstream distributive fluvial system trends were present, interpreted to be the result of the input of transverse systems of variable size. This study provides a new level of detail in the application of basin‐scale models, demonstrating their usefulness in trying to understand and predict alluvial architecture distribution and heterogeneity, with important implications for economic resources and palaeogeographic reconstructions.  相似文献   

6.
The Miocene Gorgoglione Flysch Formation records the stratigraphic product of protracted sediment transfer and deposition through a long‐lived submarine channel system developed in a narrow and elongate thrust‐top basin of the Southern Apennines (Italy). Channel‐fill deposits are exposed in an outcrop belt approximately 500 m thick and 15 km long, oriented oblique to the palaeoflow, which was roughly south‐eastward. These exceptional exposures of channel‐fill strata allow the stacking architectures and the evolution of the channel system to be analyzed at multiple scales, enabling the effects of syn‐sedimentary thrust tectonics and basin confinement on the depositional system development to be deciphered. Two end‐member types of elementary channel architecture have been identified: high‐aspect‐ratio, weakly‐confined channels, and low‐aspect‐ratio, incisional channels. Their systematic stacking results in a complex pattern of seismic‐scale depositional architectures that determines the stratigraphic framework of the deep‐water system. From the base of the succession, two prominent channel complex sets have been recognized, namely CS1 and CS2, consisting of amalgamated incisional channel elements and weakly‐confined channel elements. These channelized units are overlain by isolated incisional channels, erosional into mud‐prone slope deposits. The juxtaposition of different channel architectures is interpreted to have been governed by regional thrust‐tectonics, in combination with a high subsidence rate that promoted significant aggradation. In this scenario, the alternating ‘in sequence’ and ‘out of sequence’ tectonic pulses of the basin‐bounding thrusts controlled the activation of coarse‐clastic inputs in the basin and the resulting stacking architectures of channelized units. The tectonically‐driven confinement of the depositional system limited the lateral offset in channel stacking, preventing large‐scale avulsions. This study represents an excellent opportunity to analyze the stratigraphic evolution of a submarine channel system in tectonically‐active settings from an outcrop perspective. It should find wide applicability in analogous depositional systems, whose stratigraphic architecture has been influenced by tectonically‐controlled lateral confinement and associated lateral tilting.  相似文献   

7.
A three‐dimensional numerical model of sediment transport, erosion and deposition within a network of channel belts and associated floodplain is described. Sediment and water supply are defined at the upstream entry point, and base level is defined at the downstream edge of the model. Sediment and water are transported through a network of channels according to the diffusion equation, and each channel has a channel belt with a width that increases in time. The network of channels evolves as a result of channel bifurcation and abandonment (avulsion). The timing and location of channel bifurcation is controlled stochastically as a function of the cross‐valley slope of the floodplain adjacent to the channel belt relative to the down‐valley slope, and of annual flood discharge. A bifurcation develops into an avulsion when the discharge of one of the distributaries falls below a threshold value. The floodplain aggradation rate decreases with distance from the nearest active channel belt. Channel‐belt degradation results in floodplain incision. Extrinsic (extrabasinal, allogenic) and intrinsic (intrabasinal, autogenic) controls on floodplain dynamics and alluvial architecture were modelled, and sequence stratigraphy models were assessed. Input parameters were chosen based on data from the Rhine–Meuse delta. To examine how the model responds to extrinsic controls, the model was run under conditions of changing base level and increasing sediment supply. Rises and falls in base level and increases in sediment supply occurred over 10 000 years. Rising base level caused a wave of aggradation to move up‐valley, until aggradation occurred over the entire valley. Frequency of bifurcations and avulsions increased with rate of base‐level rise and aggradation rate. Channel‐belt width varied with water discharge and the lifespan of the channel belt. Wide, connected channel belts (and high channel‐deposit proportion) occurred around the upstream inflow point because of their high discharge and longevity. Less connected, smaller channel belts occurred further down‐valley. Such alluvial behaviour and architecture is also found in the Rhine–Meuse delta. During base‐level fall, valley erosion occurred, and the incised valley contained a single wide channel belt. During subsequent base‐level rise, a wave of aggradation moved up‐valley, filling the incised valley. Bifurcation and avulsion sites progressively moved upstream. Relatively thin, narrow channel belts bordered and cut into the valley fill. These results differ substantially from existing sequence stratigraphy models. The increase in sediment supply from upstream resulted in an alluvial fan. Most bifurcations and avulsions occurred at the fan apex (nodal avulsion), and channel belts were the widest and the thickest here (giving high channel‐deposit proportion) due to their high discharge and longevity. The width and thickness of channel belts decreased down‐valley due to decreased discharge, longevity and aggradation rate. This behaviour occurs in modern alluvial fans. Intrinsic controls also affect floodplain dynamics and alluvial architecture. Variation of aggradation rate, bifurcation frequency and number of coexisting channel belts occurred over periods of 500 to 2000 years, compared with 10 000 years for extrinsic controls. This variation is partly related to local aggradation and degradation of channel belts around bifurcation points. Channel belts were preferentially clustered near floodplain margins, because of low floodplain aggradation rate and topography there.  相似文献   

8.
《Sedimentology》2018,65(2):400-430
Integrated sedimentological and ichnological case studies of ancient meandering river systems have, for the most part, focused on the deposits of the fluvial–tidal transition zone; much less emphasis has been placed on the purely fluvial realm above the landward limit of tidal effects. This problem needs to be addressed so that in future the defining sedimentological and ichnological criteria assigned to ancient fluvial reaches are sufficiently well‐established to enable their separation from the down‐dip fluvial–tidal transition zone. Accordingly, a case study has been carried out on a well‐exposed meander belt deposit from the Late Jurassic Lourinhã Formation of the Lusitanian Basin, western Portugal (Praia Do Valmitão, Ribamar). Analysis indicates that the meander belt here comprised mixed‐load fluvial channels traversing a vegetated floodplain subject to a seasonal winter wet/summer dry palaeoclimate. This setting facilitated the development of both calcic palaeosols and shallow lakes on the adjacent floodplain. Critically, there is no evidence of the effects of tidal modulation on bedding structures, thereby establishing purely fluvial conditions. Heterolithic point‐bar deposits generated in this setting are bioturbated extensively by a trace fossil assemblage dominated by the meniscate trace Taenidium barretti , with Skolithos linearis , Planolites beverleyensis and Cylindricum isp. also recognized. A number of factors suggest that the Taenidium barretti producer in this case was a subaquatic organism living in an active fluvial channel setting (i.e. not colonizing subaerially exposed channel‐margin/floodplain deposits). Accordingly, there are some implications for current ichnofabric/ichnofacies models in the continental realm. Firstly, Taenidium ‐dominated ichnofabrics need not necessarily be confined to colonization beneath subaerially exposed surfaces; they might also be produced within submerged substrates. Secondly, there is scope to extend the range of the Scoyenia ichnofacies to include active fluvial channels and not simply those channels that were inactive or abandoned.  相似文献   

9.
Stratification in channel belts is the key to reconstructing formative channel dimensions and palaeoflow conditions; this requires an understanding of the relation between river morphodynamics and set thickness. So far, theories for reconstruction of the original morphology from preserved stratification have not been tested for meandering river channels due to the lack of detailed bathymetry. This paper reports the results of an experiment that reproduced a dynamic meandering gravel‐bed river with the objectives to: (i) test the prediction of set thickness as a function of the morphology formed by a meandering river channel; and (ii) explore and explain spatial and temporal set thickness variations in the resulting channel belt. High‐resolution measurements of time‐dependent surface elevation were used to quantitatively relate the preserved stratification to the meandering river morphology. Mean set thickness agrees well with the theoretical prediction from channel morphology. The mean preserved set thickness was 30% of the mean channel depth. Due to the absence of aggradation during the experiment, this provides a lower limit for the preserved mean set thickness which is also to be expected for aggrading systems, because reworking is some orders of magnitude faster than aggradation. Furthermore, the time required to mature a channel belt and its set thickness distribution was about the same as the time required to develop and propagate bends that fill the channel belt surface. Finally, there was much systematic spatial variation in set thickness related to repetitive point bar growth and chute cut‐off. Undisturbed and thick sets occurred close to channel belt margins and more irregular stratification with stacked thinner sets was observed in the centre of the channel belt.  相似文献   

10.
MARC J.P. GOUW 《Sedimentology》2008,55(5):1487-1516
Ancient fluvial successions often act as hydrocarbon reservoirs. Sub‐surface data on the alluvial architecture of fluvial successions are often incomplete and modelling is performed to reconstruct the stratigraphy. However, all alluvial architecture models suffer from the scarcity of field data to test and calibrate them. The purposes of this study were to quantify the alluvial architecture of the Holocene Rhine–Meuse delta (the Netherlands) and to determine spatio‐temporal trends in the architecture. Five north–south orientated cross‐sections, perpendicular to the general flow direction, were compiled for the fluvial‐dominated part of the delta. These sections were used to calculate the width/thickness ratios of fluvial sandbodies (SBW/SBT) and the proportions of channel‐belt deposits (CDP), clastic overbank deposits (ODP) and organic material (OP) in the succession. Furthermore, the connectedness ratio (CR) between channel belts was calculated for each cross‐section. Distinct spatial and temporal trends in the alluvial architecture were found. SBW/SBT ratios decrease by a factor of ca 4 in a downstream direction. CDP decreases from ca 0·7 (upstream) to ca 0·3 (downstream). OP increases from less than 0·05 in the upstream part of the delta to more than 0·25 in the downstream delta. ODP is approximately constant (0·4). CR is ca 0·25 upstream, which is approximately two times larger than in the downstream part of the delta. Furthermore, CDP in the downstream Rhine–Meuse delta increases after 3000 cal yr BP. These trends are attributed to variations in available accommodation space, floodplain geometry and channel‐belt size. For instance, channel belts tend to narrow in a downstream direction, which reduces SBW/SBT, CDP and CR. Tectonics cause local deviations in the general architectural trends. In addition, the positive correlation between avulsion frequency and the ratio of local to regional aggradation rate probably influenced alluvial architecture in the Rhine–Meuse delta. The Rhine–Meuse data set can be a great resource when developing more sophisticated models for alluvial architecture simulation, which eventually could lead to better characterizations of hydrocarbon reservoirs. To aid such usage of the Rhine–Meuse data set, constraints for relevant parameters are provided at the end of the paper.  相似文献   

11.
《Sedimentology》2018,65(6):1918-1946
In southern Patagonia, outcrops of the Upper Cretaceous Cerro Toro Formation preserve a >150 km long deep‐water axial channel belt in the Magallanes–Austral Basin, providing a unique opportunity to investigate longitudinal variations in the depositional characteristics of a deep‐water channel system. This study documents sedimentological, stratigraphical and geochronological data from the Cerro Toro Formation in the Argentine sector of the basin. New results are integrated with previous work from the Chilean basin sector to conduct a basin‐scale comparison of the timing of deposition, provenance and lithofacies proportions. The Cerro Toro channel belt includes a nearly 1000 m thick section characterized by high‐density turbidites and mass‐wasting deposits. Two ash beds from the base of the section yield U–Pb zircon ages of 90·4 ± 2 Ma and 88·0 ± 3 Ma, indicating similar initiation ages as documented in the Chilean sector. The U–Pb detrital zircon age spectra from samples in the study area reveal similar provenance trends to samples from the Chilean basin sector, with peak age populations at 310 to 260 Ma, 160 to 135 Ma and 110 to 82 Ma. The maximum depositional age of the channel belt in the Argentine sector is 87·8 ± 1·5 Ma and all new geochronology data corroborate an 86 to 80 Ma depositional age for the main Cerro Toro channel belt. Statistical analyses of 7370 beds from nearly 8000 m of new and previously published stratigraphic sections along the entire outcrop belt suggest progressive variations in the down‐system proportion of lithofacies. In the up‐slope region, lithofacies representing mass wasting processes (for example, debris‐flow and mass‐transport deposits) account for ca 29% of the stratigraphic thickness, as opposed to 5% in the down‐slope region of the channel belt, where turbidity current deposits are more prevalent. The proportion of beds >1 m thick also decreases systematically down slope, particularly for conglomeratic turbidite deposits. This work highlights that: (i) the proportion of thick beds and distribution of lithofacies are key down‐system changes in the stratigraphic fill of this deep‐water channel belt; (ii) detrital zircon trends suggest a relatively well‐mixed longitudinal depositional system; and (iii) geochronology of the main Cerro Toro outcrop belt supports but does not necessitate the model of a single, roughly age‐equivalent, channel system. This study has implications for understanding the downslope variability in depositional processes, stratigraphic architecture and reservoir quality of submarine channel systems.  相似文献   

12.
The Upper Cretaceous Bauru Group in south‐east Brazil consists of alluvial strata whose characteristics and distribution indicate a fluvial system developed in a semi‐arid to arid climate. Sections exposed within a 90 000 km2 study area in Minas Gerais State (in south‐eastern Brazil) were evaluated using facies and palaeosol analysis to formulate depositional and pedogenic models that may account for geomorphic and climate features. From east to west, the study succession records a gradual decrease in grain size, an increase in the width/thickness ratio in channels, a decrease in the lateral and vertical connectivity of channel deposits, and an increase in overbank deposits. The fluvial architecture indicates a braided channel belt, ephemeral ribbon–channels, and an unconfined fluvial facies from east to west in the study area. The lateral and vertical distribution of facies, stratigraphic architecture and palaeocurrent data suggest proximal, medial and distal portions of a progradational distributive fluvial system. The sedimentary dynamics were marked by the building and abandonment of channels related to processes of aggradation, vegetation growth and palaeosol generation. Macromorphological and micromorphological analyses have identified pedological and mineralogical features that indicate an arid to semi‐arid climate with a provenance from the north‐eastern part of the basin (Alto Paranaiba Uplift). From the proximal to the distal portions of the distributive fluvial system, the palaeosol development is different. In the proximal portion, the palaeosols are absent or poorly developed, allowing a possible general comparison with the present soil order: Inceptisols and Aridisols. In the medial portion of the fluvial system, the palaeosols are well‐developed and characterized by Bt, Btk, C and Ck horizons (Alfisols, Aridisols, Inceptisols and Entisols). Poorly drained to well‐drained palaeosols from the base to the top in the distal plain (Aridisols and Inceptisols) are associated with geomorphic and hydromorphic changes in the fluvial system due to progradational evolution. The genetic relationship between the fluvial architecture and the palaeosols enhances the understanding that the sedimentation and pedogenesis that occurs in different portions of the distributive fluvial system are related to the tectonic and climatic evolution of the basin.  相似文献   

13.
The sequence architecture and depositional systems of the Paleogene lacustrine rift succession in the Huanghekou Sag, Bohai Bay Basin, NE China were investigated based on seismic profiles, combined with well log and core data. Four second‐order or composite sequences and seven third‐order sequences were identified. The depositional systems identified in the basin include: fan delta, braid delta, meander fluvial delta, lacustrine and sublacustrine fan. Identification of the slope break was conducted combining the interpretation of faults of each sequence and the identification of syndepositional faults, based on the subdivision of sequence stratigraphy and analysis of depositional systems. Multiple geomorphologic units were recognized in the Paleogene of the Huanghekou Sag including faults, flexures, depositional slope break belts, ditch‐valleys and sub‐uplifts in the central sag. Using genetic division principles and taking into consideration tectonic features of the Paleogene of the Huanghekou Sag, the study area was divided into the Northern Steep Slope/Fault Slope Break System, the Southern Gentle Slope Break System and T10 Tectonic Slope Break System/T10 Tectonic Belt. Responses of slope break systems to deposition–erosion are shown as: (1) basin marginal slope break is the boundary of the eroded area and provenance area; (2) ditch‐valley formed by different kinds of slope break belts is a good transport bypass for source materials; (3) shape of the slope break belt of the slope break system controls sediments types; (4) the ditch‐valley and sub‐sag of a slope break system is an unloading area for sediments; and (5) due to their different origins, association characteristics and developing patterns, the Paleogene slope break belt systems in the Huanghekou Sag show different controls on depositional systems. The Northern Fault Slope Break system controls the deposition of a fan delta‐lacustrine‐subaqueous fan, the Southern Gentle Slope Break system controls the deposition of a fluvial–deltaic–shallow lacustrine and sublacustrine fan, and the T10 Tectonic Slope Break System controls the deposition of shallow lacustrine beach bar sandbodies. The existence of a slope break system is a necessary but not a sufficient condition for studying sandbody development. The formation of effective sandbodies along the slope break depends on the reasonable coupling of effective provenance, necessary association patterns of slope break belt, adequate unloading space and creation of definite accommodation space. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

14.
《Sedimentary Geology》2001,139(3-4):229-260
Early- to middle-Miocene fluvial sandstones of the Rio Vero Formation were studied, in an area around the town of Barbastro, south central Pyrenees Spain. The outstanding quality of outcrops in this area allows a three-dimensional study of architectural elements.Six architectural elements are recognised, described in detail, and interpreted from three key localities. Seven main lithofacies were identified and sub-divided into gravelly, sandy and fine-grained lithofacies. The architectural elements and lithofacies have been combined with a hierarchy of depositional bounding surfaces to fully interpret the evolution of the depositional system at the meso- and macro-scale. Not only the different architectural elements and lithofacies of the complete braided fluvial system, but also the lateral variation of the architectural elements were emphasised in this study. Differential tectonic movements, seasonal climate change, and their effect on vertical and lateral evolution of the area were the main control on basin sedimentation, channel interconnection, palaeocurrent patterns, and consequently the fluvial architecture.The presence of lateral ramp anticlines caused the fluvial system to be laterally restricted, with the main channel-belts being located in the areas of highest subsidence and lowest topography. Intervening topographic highs acted as both flood plains and lateral barriers between the main channel systems. The proposed depositional model comprises broad, low-sinuosity, perennial, but seasonal moderate-energy streams. The sandstone architecture is dominated by channel-fill and sheet sands, and associated simple and more complex bars. Adjacent to the main channel-belts fine-grained sandstones, siltstones and immature paleosols occur.The along-strike relationship between major fluvial systems and their outlets into a foreland basin has important implications for the infill of the basin and the modelling of fluvial systems along mountain belt fronts.  相似文献   

15.
通过对研究区露头、岩性、测井等特征的研究,将柴达木盆地新近纪上下油砂山组划分出5种重要的沉积相类型：冲积扇相、河流相、扇三角洲相、三角洲相、湖泊相,并进行详细描述。依据单因素分析多因素综合画图的方法论,做出上下油砂山组沉积相平面展布图。沉积相带是控制储层特征和分布的基本因素。结合沉积相带图,划出油砂山组储集相带,有利储集相主要是三角州前缘砂体,冲积扇-扇三角洲分流河道砂体,浅湖滩坝;主要分布在沙西、乌南、咸水泉、月牙山、红沟子、阿尔金斜坡带,而碱山地区的储集相带发育较差。  相似文献   

16.
The repetitive sedimentology of many Precambrian sheet‐dominated fluvial sandstones favoured their attribution to unconfined depositional processes. This article presents outcrop evidence for deep‐channelled drainage in the 1·9 Ga Burnside River Formation of Kilohigok Basin, Arctic Canada. On the ground, sheet‐like sandbodies with ubiquitous cross‐bedding are at first consistent with classic, unconfined depositional models. However, satellite and oblique‐aerial imagery of sections up to 15 km wide and 500 m thick reveals the occurrence of incised palaeovalleys hosting clustered, kilometre‐scale, channel bodies with attached large foreset bars pointing to downstream‐lateral accretion, sand sheets with aspect ratios (i.e. width to thickness) as high as 2500, and scattered aeolian intervals. The genetic association of these architectural elements points to aggradational fluvial piedmonts composed of low‐relief unit bars generated by braidplain channels several metres deep. Preservation of aeolianites was facilitated by fluctuating groundwater table and accommodation. Fluvial piedmonts were transected by weakly sinuous channel belts up to 25 m deep and characterized by through‐going or tributary planform. Aspect ratios comparable with those of late Palaeozoic to modern braided channels disprove the inference that all Precambrian streams readily widened in response to increased discharge. Previous facies models for large‐scale Precambrian sheet‐braided rivers failed to depict entire channel forms, possibly because they could not be resolved by ground‐based observations. Based on their limited geomorphic variability and abundance of architectural elements with very high aspect ratios, this study recommends that large sheet‐braided fluvial systems should still be considered separately from their post‐Silurian (i.e. vegetated) braided counterparts. Parallels between sheet‐braided and modern dryland rivers do not, however, reconcile with the deep, perennial, channelized processes described here. Yet, distal sand‐bed and perennial reaches of modern sandur plains remain the closest analogue to sheet‐braided rivers. This conjecture contradicts the assumption that all Precambrian rivers were prone to simulate seasonal behaviours independently from their actual climate regime.  相似文献   

17.
The Bashkirian Lower Brimham Grit of North Yorkshire, England, is a fluvio‐deltaic sandstone succession that crops out as a complex series of pinnacles, the three‐dimensional arrangement of which allows high‐resolution architectural analysis of genetically‐related lithofacies assemblages. Combined analysis of sedimentary graphic log profiles, architectural panels and palaeocurrent data have enabled three‐dimensional geometrical relationships to be established for a suite of architectural elements so as to develop a comprehensive depositional model. Small‐scale observations of facies have been related to larger‐scale architectural elements to facilitate interpretation of the palaeoenvironment of deposition to a level of detail that has rarely been attempted previously, thereby allowing interpretation of formative processes. Detailed architectural panels form the basis of a semi‐quantitative technique for recording the variety and complexity of the sedimentary lithofacies present, their association within recognizable architectural elements and, thus, the inferred spatio‐temporal relationship of neighbouring elements. Fluvial channel‐fill elements bounded by erosional surfaces are characterized internally by a hierarchy of sets and cosets with subtly varying compositions, textures and structures. Simple, cross‐bedded sets represent in‐channel migration of isolated mesoforms (dunes); cosets of both trough and planar‐tabular cross‐bedded facies represent lateral‐accreting and downstream‐accreting macroforms (bars) characterized by highly variable, yet predictable, patterns of palaeocurrent indicators. Relationships between sandstone‐dominated strata bounded by third‐order and fifth‐order surfaces, which represent in‐channel bar deposits and incised channel bases, respectively, chronicle the origin of the preserved succession in response to autocyclic barform development and abandonment, major episodes of incision probably influenced by episodic tectonic subsidence, differential tilting and fluvial incision associated with slip on the nearby North Craven Fault system. Overall, the succession represents the preserved product of an upper‐delta plain system that was traversed by a migratory fluvial braid‐belt system comprising a poorly‐confined network of fluvial channels developed between major sandy barforms that evolved via combined lateral‐accretion and downstream‐accretion.  相似文献   

18.
Stratigraphic patterns and sequence development in tectonically active extensional basins remain poorly documented in comparison with passive‐margin settings. Rift basin fills are generally characterized by coarsening‐upward trends in response to the rapid creation of accommodation by extensional faulting, and the progressive filling of graben during more quiescent periods. The Early Permian Irwin River Coal Measures in the Northern Perth Basin (Western Australia) record a complex stratigraphic arrangement of conglomerate, sandstone, mudstone and coal, and have been attributed to delta plain depositional environments that developed in a cool–temperate climatic setting during syn‐rift activity. Sedimentary analysis of outcrop and core data from the fault‐bounded Irwin Terrace is used to distinguish nine facies associations reflecting deposition in braided rivers, fixed‐anastomosed channel belts, tide‐influenced coastal environments and storm‐affected distal bays. The broader depositional system is interpreted as a morphologically asymmetrical tide‐dominated embayment with a fluvial and wave influence. The stratigraphic architecture of the Irwin River Coal Measures was strongly influenced by the evolving rift basin margin. Fault reactivation of the major basin‐bounding Darling Fault in the early syn‐rift phase caused footwall uplift and the inception of transverse palaeo‐valleys occupied by braided fluvial systems. Fault block subsidence during the subsequent balanced, backstepping and drowning phases resulted in a dominantly retrogradational stacking pattern indicating progressive flooding of marginal‐marine areas and culminating in deposition of distal marine elements. In the active rift basin, it is proposed that preservation of a shallow‐marine syn‐rift sequence was promoted by the geomorphological confinement of the embayed system increasing tidal current acceleration and hampering transgressive ravinement. The proposed sequence model demonstrates that transgressive successions can develop in the early syn‐rift phase in response to footwall uplift and tectonic subsidence. The syn‐rift sequence recording the filling of an embayment on a rift basin margin may be applied in similar tectonic and/or depositional contexts worldwide.  相似文献   

19.
依据地震、钻井、测井、地层对比以及地层厚度等资料,对松辽盆地古龙凹陷泉头组坡折带进行了深入研究,发现 该区发育三种类型坡折,即断裂坡折、挠曲坡折和沉积坡折,坡折带沿着凹陷西部英台鼻状构造呈南北向弧形分布,平均 坡降介于19‰~50‰之间。坡折带的发育对层序结构及沉积演化具有重要控制作用,断裂坡折带发育于层序的底部,控制 了SQ11河流相加积型层序的发育,其特点是坡折下部地层厚度是上部的2倍。挠曲坡折带发育于层序中部,呈现缓坡带 （α） 和陡坡带（β） 两段式特点,四级层序SQ21在坡折部位发育密集的上超点,形成了以湖相上超为特点的层序结构,同 时坡折带两侧地层具有上薄下厚的分布格局。沉积坡折带分布在层序顶部,控制了五级层序SQ22-1的发育,形成了湖泊 -三角洲相进积型层序,具有坡折下部薄、上部厚的分布特点。断裂坡折带控制的河流相加积型层序,有利于断层上倾遮 挡及点坝透镜体圈闭的发育;挠曲坡折带控制的湖相上超型层序,有利于岩性上倾尖灭圈闭的发育;沉积坡折带控制的湖 泊-三角洲进积型层序,有利于河口坝型岩性圈闭的发育,因此,坡折带的研究对于松辽盆地古龙凹陷油气勘探具有重要 的指导意义。  相似文献   

20.
Seafloor images of coarse‐grained submarine channel–levée systems commonly reveal complex braid‐plain patterns of low‐amplitude bedforms and zones of apparent bypass; however, mechanisms of channel evolution and the resultant channel‐fill architecture are poorly understood. At Playa Esqueleto the lateral relationships between various elements of a deep‐marine slope channel system are well‐exposed. Specifically, the transition from gravel‐dominated axial thalwegs to laterally persistent marginal sandstones and isolated gravel‐filled scours is revealed. Marginal sandstones pass into a monotonous thin‐bedded succession which built to form relatively low‐relief levées bounding the channel belt; in turn, the levées onlap the canyon walls. Three orders of confinement were important during the evolution of the channel system: (i) first‐order confinement was provided by the erosional canyon which confined the entire system; (ii) confined levées built of turbidite sandstones and mudstones formed the second‐order confinement, and it is demonstrated that these built from overspill at thalweg margins; and (iii) third‐order confinement describes the erosional confinement of coarse‐grained thalwegs and scours. Finer‐grained sediment was transported in suspension and largely was unaffected by topography at the scale of individual thalwegs. Facies and clast analyses of conglomerate overlying channel‐marginal scours reveal that they were deposited by composite gravity flows, which were non‐cohesive, grain‐dominant debris flows with more fluidal cores. These flows were capable of basal erosion but were strongly depositional; frictional freezing at flow margins built gravel levées, while the core maintained a more fluidal transport regime. The resultant architecture consists of matrix‐rich, poorly sorted levées bounding better‐sorted, traction‐dominated cores. The planform geometry is interpreted to have consisted of a low‐sinuosity gravel braid‐plain built by accretion around mid‐channel and bank‐attached bars. This part of the system may be analogous to fluvial systems; however, the finer‐grained sediment load formed thick suspension clouds, probably several orders of magnitude thicker than the relief of braid‐plain topography and therefore controlled by the levées and canyon wall confinement.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号