首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 125 毫秒
1.
The thermochemical study of a natural basic copper phosphate, pseudomalachite Cu5(PO4)2(OH)4 (Virneberg deposit, Germany), was carried out using high-temperature melt solution calorimetry method with a Tian–Calvet microcalorimeter. The enthalpy of formation of the mineral from elements was obtained to be Δ f Hel(298.15 K) =–3214 ± 13 kJ/mol. The value of the Gibbs energy of pseudomalachite formation calculated using literature data on its standard entropy is Δ f Hel°(298.15 K) =–2812 ± 13 kJ/mol.  相似文献   

2.
The paper reports pioneering data on the calorimetrically determined enthalpy of formation from elements of cuspidine, Ca fluordiorthosilicate Ca4Si2O7F2, from the Tyrny-Auz Mo–W deposit in Kabardino- Balkaria, Russia. The data were obtained by high-temperature melt solution calorimetry. The determined value is ΔfHel° (298.15 K) =–5190 ± 13 kJ/mol. The paper reports estimated S°(298.15 K) and ΔfGel° (298.15 K) of cuspidine.  相似文献   

3.
The paper presents the results of a thermochemical and thermal study of cancrinite, (Na6.93Ca0.545K0.01)Σ7.485[(Si6.47Al5.48Fe0.05)Σ12O24](CO3)1.25 · 2.30 H2O, and cancrisilite, (Na7.17 Ca0.01)Σ7.18[(Si7.26Al4.70Fe0.04)Σ12O24][(CO3)1.05(OH)0.21(PO4)0.04(SO4)0.01] · 2.635 H2O, from the Khibina-Lovozero Complex, Kola Peninsula, Russia. Stages of the thermal decomposition of these minerals were studied using IR spectroscopy. The enthalpies of formation of the minerals from elements were determined by melt drop solution calorimetry: Δ f H el 0 (298.15 K) = ?14 490 ± 16 kJ/mol for cancrinite and ?14302 ± 17 kJ/mol for cancrisilite. The values of Δ f H el 0 (298.15 K), S o(298.15 K), and Δ f H el 0 (298.15 K) are determined for cancrinite and cancrisilite of theoretical composition.  相似文献   

4.
Using the method of direct synthesis calorimetry, we determined the standard enthalpy of formation of PtSb (stumpflite), Δ f 298.15 (PtSb, cr) =–105.16 ± 0.84 kJ/mol and PdSb2 (geversite), Δ f 298.15 (PtSb2,cr) =–160.92 ± 0.84 kJ/mol. Isothermal (298.15 K, p = 1 bar) phase diagrams were computed for the Pt–Sb–S and Pt–Sb–O ternary systems in the coordinates composition of the Pt–Sb binary system versus fugacity of a gaseous volatile component (O2, S2).  相似文献   

5.
Based on the expert review of literature data on the thermodynamic properties of species in the Cl-Pd system, stepwise and overall stability constants are recommended for species of the composition [PdCl n ]2 ? n , and the standard electrode potential of the half-cell PdCl 4 2? /Pd(c) is evaluated at E 298,15° = 0.646 ± 0.007 V, which corresponds to Δ f G 298.15° = ?400.4 ± 1.4 kJ/mol for the ion PdCl 4 2? (aq). Derived from calorimetric data, Δ f H 298.15° PdCl 4 2? (aq) = ?524.6 ± 1.6 kJ/mol and Δ f H 298.15° Pd2+(aq) = 189.7 ± 2.6 kJ/mol. The assumed values of the overall stability constant of the PdCl 4 2? ion and the standard electrode potential of the PdCl 4 2? /Pd(c) half-cell correspond to Δ f G 298.15° = 190.1 ± 1.4 kJ/mol and S 298.15° = ?94.2 ± 10 J/(mol K) for the Pd2+(aq) ion.  相似文献   

6.
The paper reports data obtained in the course of a comprehensive physicochemical study of Li-tosudite, a mixed-layer mineral from hydrothermally altered rocks in western Chukotka, Russia, whose formula was reliably established. The enthalpy of formation of Li-tosudite from Chukotka, Ca0.15(Li0.9Mg0.2Al6.0)[Si6.4Al1.6O20](OH)10 · 3.3H2O, from elements was experimentally determined by melt solution calorimetry in a high-temperature Calvet microcalorimeter: ΔfH el o (298.15 К) =–15087 ± 26 kJ/mol. The standard entropy and Gibbs free energy of formation of this mineral were evaluated.  相似文献   

7.
The solubility of Gd2Ti2O7 ceramic in acidic solutions (HCl and HClO4) was studied at 250°C and saturation vapor pressure within pH 2.5–5.2. The dissolution process occurs mainly via two reactions: 0.5 Gd2Ti2O7(cr) + 3H+ = Gd3+ + TiO2(cr) + 1.5 H2O at pH < 3 and 0.5Gd2Ti2O7(cr) + H+ + 0.5H2O = Gd(OH) 2 + TiO2(cr) at pH 3–5. The thermodynamic equilibrium constants were calculated at the 0.95 confidence level as log K (1) o = 4.12 ± 0.47; = ?0.97 ± 0.16 at 250°C. It was shown that Gd3+ undergoes hydrolysis in solutions with pH > 3, and the species Gd(OH) 2 + dominates up to at least pH 5. At pH < 3, Gd occurs in solutions as Gd3+. The second constant of Gd3+ hydrolysis was determined at 250°C as K o = ?5.09 ± 0.5, and the thermodynamic characteristics of the initial Gd2Ti2O7 solid phase were determined: S 298.15 o = 251.4 J/(mol K) and ΔfG 298.15 o = ?3630 ± 10 kJ/mol.  相似文献   

8.
AIA/SDO data in the 193 Å channel preceding a coronal mass ejection observed at the solar limb on June 13, 2010 are used to simultaneously identify and examine two different shock fronts. The angular size of each front relative to the CME center was about 20°, and their propagation directions differed by ≈25° (≈4° in position angle). The faster front, called the blast shock, advanced the other front, called the piston shock, by R ≈ (0.02-0.03)R⊙ (R⊙ is the solar radius) and had a maximum initial speed of VB ≈ 850 km/s (with VP ≈ 700 km/s for the piston shock). The appearance and motion of these shocks were accompanied by a Type II radio burst observed at the fundamental frequency F and second harmonic H. Each frequency was split into two close frequencies f1 and f2 separated by Δf = f2 - f1 ? F, H. It is concluded that the observed frequency splitting Δf of the F and H components of the Type II burst could result from the simultaneous propagation of piston and blast shocks moving with different speeds in somewhat different directions displaying different coronal-plasma densities.  相似文献   

9.
We have performed experiments to determine the effects of pressure, temperature and oxygen fugacity on the CO2 contents in nominally anhydrous andesitic melts at graphite saturation. The andesite composition was specifically chosen to match a low-degree partial melt composition that is generated from MORB-like eclogite in the convective, oceanic upper mantle. Experiments were performed at 1–3 GPa, 1375–1550?°C, and fO2 of FMQ ?3.2 to FMQ ?2.3 and the resulting experimental glasses were analyzed for CO2 and H2O contents using FTIR and SIMS. Experimental results were used to develop a thermodynamic model to predict CO2 content of nominally anhydrous andesitic melts at graphite saturation. Fitting of experimental data returned thermodynamic parameters for dissolution of CO2 as molecular CO2: ln(K 0) = ?21.79?±?0.04, ΔV 0?=?32.91?±?0.65 cm3mol?1, ΔH 0?=?107?±?21 kJ mol?1, and dissolution of CO2 as CO3 2?: ln(K 0 ) = ?21.38?±?0.08, ΔV 0?=?30.66?±?1.33 cm3 mol?1, ΔH 0?=?42?±?37 kJ mol?1, where K 0 is the equilibrium constant at some reference pressure and temperature, ΔV 0 is the volume change of reaction, and ΔH 0 is the enthalpy change of reaction. The thermodynamic model was used along with trace element partition coefficients to calculate the CO2 contents and CO2/Nb ratios resulting from the mixing of a depleted MORB and the partial melt of a graphite-saturated eclogite. Comparison with natural MORB and OIB data suggests that the CO2 contents and CO2/Nb ratios of CO2-enriched oceanic basalts cannot be produced by mixing with partial melts of graphite-saturated eclogite. Instead, they must be produced by melting of a source containing carbonate. This result places a lower bound on the oxygen fugacity for the source region of these CO2-enriched basalts, and suggests that fO2 measurements made on cratonic xenoliths may not be applicable to the convecting upper mantle. CO2-depleted basalts, on the other hand, are consistent with mixing between depleted MORB and partial melts of a graphite-saturated eclogite. Furthermore, calculations suggest that eclogite can remain saturated in graphite in the convecting upper mantle, acting as a reservoir for C.  相似文献   

10.
The heat capacity of praseodymium orthophosphate PrPO4 was measured by adiabatic and relaxation calorimetric techniques at 5.12–345.54 K, and these data were utilized to calculate thermodynamic functions of PrPO4 at 6–350 K. The Gibbs free energy of PrPO4 formation ΔfG0(298.15 K) is evaluated at 1851.8 ± 4.7 kJ mol–1.  相似文献   

11.
The influence of oxygen fugacity (fO2) and temperature on the valence and structural state of iron was experimentally studied in glasses quenched from natural aluminosilicate melts of granite and pantellerite compositions exposed to various T-fO2 conditions (1100–1420°C and 10?12–10?0.68 bar) at a total pressure of 1 atm. The quenched glasses were investigated by Mössbauer spectroscopy. It was shown that the effect of oxygen fugacity on the redox state of iron at 1320–1420°C can be described by the equation log(Fe3+/Fe2+) = k log(fO2) + q, where k and q are constants depending on melt composition and temperature. The Fe3+/Fe2+ ratio decreases with decreasing fO2 (T = const) and increasing temperature (fO2 = const). The structural state of Fe3+ depends on the degree of iron oxidation. With increasing Fe3+/Fe2+ ≥ 1, the dominant coordination of Fe3+ changes from octahedral to tetrahedral. Ferrous iron ions occur in octahedral (and/or five-coordinated) sites independent of Fe3+/Fe2+.  相似文献   

12.
A new mineral, yegorovite, has been identified in the late hydrothermal, low-temperature assemblage of the Palitra hyperalkaline pegmatite at Mt. Kedykverpakhk, Lovozero alkaline pluton, Kola Peninsula, Russia. The mineral is intimately associated with revdite and megacyclite, earlier natrosilite, microcline, and villiaumite. Yegorovite occurs as coarse, usually split prismatic (up to 0.05 × 0.15 × 1 mm) or lamellar (up to 0.05 × 0.7 × 0.8 mm) crystals. Polysynthetic twins and parallel intergrowths are typical. Mineral individuals are combined in bunches or chaotic groups (up to 2 mm); radial-lamellar clusters are less frequent. Yegorovite is colorless, transparent with vitreous luster. Cleavage is perfect parallel to (010) and (001). Fracture is splintery; crystals are readily split into acicular fragments. The Mohs hardness is ~2. Density is 1.90(2) g/cm3 (meas) and 1.92 g/cm3 (calc). Yegorovite is biaxial (?), with α = 1.474(2), β = 1.479(2), and γ = 1.482(2), 2V meas > 70°, 2V calc = 75°. The optical orientation is Xa ~ 15°, Y = c, Z = b. The IR spectrum is given. The chemical composition determined using an electron microprobe (H2O determined from total deficiency) is (wt %): 23.28 Na2O, 45.45 SiO2, 31.27 H2Ocalc; the total is 100.00. The empirical formula is Na3.98Si4.01O8.02(OH)3.98 · 7.205H2O. The idealized formula is Na4[Si4O8(OH)4] · 7H2O. Yegorovite is monoclinic, space group P21/c. The unit-cell dimensions are a = 9.874, b= 12.398, c = 14.897 Å, β = 104.68°, V = 1764.3 Å3, Z = 4. The strongest reflections in the X-ray powder pattern (d, Å (I, %)([hkl]) are 7.21(70)[002], 6.21(72)[012, 020], 4.696(44)[022], 4.003(49)[211], 3.734(46)[\(\bar 2\) 13], 3.116(100)[024, 040], 2.463(38)[\(\bar 4\)02, \(\bar 2\)43]. The crystal structure was studied by single-crystal method, R hkl = 0.0745. Yegorovite is a representative of a new structural type. Its structure consists of single chains of Si tetrahedrons [Si4O8(OH)4]∞ and sixfold polyhedrons of two types: [NaO(OH)2(H2O)3] and [NaO(OH)(H2O)4] centered by Na. The mineral was named in memory of Yu. K. Yegorov-Tismenko (1938–2007), outstanding Russian crystallographer and crystallochemist. The type material of yegorovite has been deposited at the Fersman Mineralogical Museum of Russian Academy of Sciences, Moscow.  相似文献   

13.
The standard thermodynamic properties (Δf G°, S°, Δf H°) of the following synthetic minerals and compounds in the Ag-Au-Se and Ag-Au-Te systems were determined by the EMF method: β-Ag2Se (low-temperature naumannite), α-Ag2Se (high-temperature naumannite), Ag3AuSe2 (fischesserite), AuSe, Ag5Te3 (stützite), Ag2 Te (hessite), and Ag3AuTe2 (petzite). All minerals and compounds were produced by solid-phase synthesis from elements or electrum of the given composition in evacuated ampoules made of quartz glass. The phases were verified by X-ray diffraction analysis, microscopically in reflected light, and with an electron microprobe. The absence of the ternary compound AgAuSe in the Ag-Au-Se system was confirmed by solid-phase annealing. On the basis of experimental data on the electromotive force E versus temperature, the equations E(T) were calculated, from which the temperature-dependent relationships of the Gibbs energy in the relevant reactions and the standard thermodynamic functions of compounds within the range 300–502 K were obtained.  相似文献   

14.
The behavior of the 0.1 mNaCl + 0.002 mHCl + 1.9 × 10?5 mUO2(NO3)2 solution was studied at pH from 2.7 to 11.0, 25°C, and 1 bar in an argon atmosphere. The curve of variations in U concentration exhibits two minima at pH = 6.6 ± 0.7 and 10.0 ± 0.5. These minima are related to the precipitation of schoepite and clarkeite, respectively. The experimental data were used to refine the stability constants of U(VI) (hydroxo) complexes. For the polymer species of U(VI) with charges from +2 to ?1, the method of additivity of thermochemical increments was used, and increments of the linear relation were determined for the calculation of the Gibbs free energies of formation (ΔfG 298.15 0 ) of respective homologue series. The proposed method was applied to calculate the ΔfG 298.15 0 of formation of U(VI) (hydroxo)complexes containing from one to five uranium atoms.  相似文献   

15.
A new potassium uranyl selenate compound K(UO2)(SeO4)(OH)(H2O) has been synthesized for the first time using the technique of evaporation from water solution. Its crystal structure has been solved by direct methods (monoclinic, P21/c,a = 8.0413(9) Å, b = 8.0362(9) Å, c = 11.6032(14) Å, β = 106.925(2)°, V = 717.34(14) Å3) and refined to R 1 = 0.0319 (wR 2 = 0.0824) for 1285 reflections with |F 0| > 4σ F . The structure consists of [(UO2(SeO4)(OH)(H2O)]? chains extending along axis b. In the chains, the uranyl pentagonal bipyramids are linked via bridged hydroxyl anions and tetrahedral oxoanions [SeO4]2?. Potassium ions are situated between these chains. No chains of that type have been observed in uranyl compounds earlier, but they had been detected in the structures of butlerite, parabutlerite, uklonskovite, fibroferrite, and a number of synthetic compounds.  相似文献   

16.
Single-crystal study of the structure (R = 0.0268) was performed for garyansellite from Rapid Creek, Yukon, Canada. The mineral is orthorhombic, Pbna, a = 9.44738(18), b = 9.85976(19), c = 8.14154(18) Å, V = 758.38(3) Å3, Z = 4. An idealized formula of garyansellite is Mg2Fe3+(PO4)2(OH) · 2H2O. Structurally the mineral is close to other members of the phosphoferrite–reddingite group. The structure contains layers of chains of M(2)O4(OH)(H2O) octahedra which share edges to form dimers and connected by common edges with isolated from each other M(1)O4(H2O)2 octahedra. The neighboring chains are connected to the layer through the common vertices of M(2) octahedra and octaahedral layers are linked through PO4 tetrahedra.  相似文献   

17.
As part of our study of the components of the hierarchic quadruple system ADS 11061, we acquired spectroscopic observations of the binary 40 Dra. Echelle spectra showing the separation of the components’ lines were obtained in the spectral range 3700–9200 Å. Effective temperatures and surface gravities were derived for the components from BV photometry and the hydrogen-line profiles. The components of the 40 Dra system have parameters close to T eff a = 6420 K, log g a = 4.17, T eff b = 6300 K, and log g b = 4.20. We find the microturbulence velocity in the component atmospheres to be V t = 2.6 km/s. The abundances of iron, carbon, nitrogen, and oxygen in the atmospheres of both components are estimated to be log N(Fe)a = 7.50, log N(Fe)b = 7.46, log N(C)a = 8.39, log N(C)b = 8.45, log N(N)a = 8.12, log(N)b = 8.15, log N(O)a = 8.77, log N(O)b = 8.74.  相似文献   

18.
We obtained speckle interferometric and spectroscopic observations of the system 41 Dra during its periastron passage in 2001. The components’ lines are resolved in the spectral interval 3700–9200 Å. The observed wavelength dependence of the brightness difference between the components is used to estimate the B-V indices separately for each of the components: B-V = 0.511 for component a and B-V = 0.502 for component b. We derived improved effective temperatures of the components from their B-V values and hydrogen-line profiles. The observations can be described with the parameters for the components T eff a = 6370 K, log ga = 4.05 and T eff b = 6410 K, log gb = 4.20. The iron, carbon, nitrogen, and oxygen abundances in the atmospheres of the components are log N(Fe)a = 7.55, log N(Fe)b = 7.60, log N(C)a = 8.52, log N(C)b = 8.58, log N(N)a = 8.05, log N(N)b = 7.99, log N(O)a = 8.73, log N(O)b = 8.76.  相似文献   

19.
Thermodynamic simulation of the system living matter (algae, zooplankton, or green plants) + mineral matter (25% carbonates + 75% clay minerals) + standard seawater at temperatures and pressure corresponding to diagenesis indicates that kerogen can be synthesized, together with hydrocarbons and carbon dioxide, in the reaction mix. The removal of CO2(g) and N2(g) from the system is favorable for the reaction Δ1C292H288O12 (s; H/C = 0.99, O/C = 0.041) → Δ2C128H68O7 (s; H/C = 0.53, O/C = 0.055) + xСH4(aq) + yCO2(aq) + zH2O, whose constant and stoichiometric coefficients were calculated based on the simulation results. It is demonstrated that a pressure increase is favorable, while a temperature increase is not, for the procedure of this reaction at P-T parameters of diagenesis: log K =–567 (20°C, 35 bar), 1170 (20°C, 200 bar),–1530 (20°C, 60 bar), and +1030 (20°C, 600 bar).  相似文献   

20.
Thaumasite, Ca3Si(OH)6(CO3)(SO4)12H2O, occurs as a low-temperature secondary alteration phase in mafic igneous and metamorphic rocks, and is recognized as a product and indicator of sulfate attack in Portland cement. It is also the only mineral known to contain silicon in six-coordination with hydroxyl (OH)? that is stable at ambient PT conditions. Thermal expansion of the various components of this unusual structure has been determined from single-crystal X-ray structure refinements of natural thaumasite at 130 and 298 K. No phase transitions were observed over this temperature range. Cell parameters at room temperature are: a= 11.0538(6) Å, c=10.4111(8) Å and V=1101.67(10) Å3, and were measured at intervals of about 50 K between 130 and 298 K, resulting in mean axial and volumetric coefficients of thermal expansion (×10?5K?1); α a =1.7(1), α c =2.1(2), and α V =5.6(2). Although the unit cell and VIIICaO8 polyhedra show significant positive thermal expansion over this temperature range, the silicate octahedron, sulfate tetrahedron, and carbonate group show zero or negative thermal expansion, with α V (VISiO6) = ?0.6 ± 1.1, α V (IVSO4)=?5.8 ± 1.4, and α R (C–O)= 0.0 ± 1.8 (×10?5 K?1). Most of the thermal expansion is accommodated by lengthening of the R(O...O) hydrogen bond distances by on average 5σ, although the hydrogen bonds involving hydroxyl sites on VISi expand twice as much as those on molecular water, causing the [Ca3Si(OH)6(H2O)12]4+ columns to expand in diameter more than they move apart over this temperature range. The average Si–OH bond length of the six-coordinated Si atom 〈R(VISi–OH)〉 in thaumasite is 1.783(1) Å, being about 0.02 Å (?20σ) shorter than VISi–OH in the dense hydrous magnesium silicate, phase D, MgSi2H2O6.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号