首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 375 毫秒
1.
Regional carbonate dispersal trains cross Melville Peninsula in the northeastern Canadian Arctic. These trains are 50-125 km across and 100-300 km long. The northern dispersal train crosses upland and lowland areas, while the Rae Isthmus train follows the lowlands. The distribution of carbonate in boulder, pebble and matrix till fractions indicates long-distance glacial transport of limestone, a low rate of dilution, and comminution from pebble to silt sizes. Dispersal patterns and geotechnical properties of the till suggest deforming bed and basal gliding mechanisms of ice flow associated with ice-streaming. Regional ice streams may have been 'normative' in carbonate terrain during the main Foxe (Wisconsin) Glaciation. Till plumes within regional dispersal trains, showing little dilution of carbonate down-ice from bedrock sources, are oriented towards lowlands. These features, sharp-edged and 300 mwide, mark zones of augmented flow. They are late-glacial features that formed after calving bays developed in Committee Bay. The dimensions of the dispersal trains, and ice-flow styles and mechanisms, are similar to those of modern Antarctic ice streams. The sharp edges of till plumes may delineate flow boundaries marked by lateral crevasse zones in the late-glacial ice sheet. Secondary streams-within-ice streams have not been reported previously in the literature.  相似文献   

2.
A subglacial till formed from a sandstone bedrock has a variable grain-size distribution which reflects its variable genesis. Glacial comminution processes were simulated by artificial mill experiments with fragments of the sandstone bedrock. Pure crushing caused disintegration along mineral boundaries into separate minerals, most mineral grains retaining their primary size during the crushing process. Abrasion produced cracks across the minerals and resulted in silt-sized rock flour. The experiments indicate that most of the sand-sized till material formed as a result of crushing, while the silt is mainly the result of abrasion. The sand and silt are both regarded as components resistant to further glacial comminution, but are formed by different comminution processes. By considering also the coarser till material, the general principles of glacial breakdown of resistant rocks from boulders to sand or silt can be illustrated. A matrix index and an abrasion index based on the mill experiments distinguish well between genetically different subglacial till types  相似文献   

3.
Traditional views of glacigenic processes focus on erosion of hard bedrock and deposition of unconsolidated till. In the 1960s and 1970s attention was directed towards the glacier debris cascade, which linked these two end members. A limited understanding of the relationship between bedrock character, the supposed processes of erosion, debris comminution and texture emerged. In the 1980s researchers began to appreciate the important role which glaciotectonism plays in the spectrum of glacigenic processes, although little attention has been paid to the interface between glacial erosion, glaciotectonism and the early stages of the debris cascade system. A coastal section at Fanore, County Clare, Ireland affords a unique opportunity to examine a range of glacial deposits which represent a series in the erosion, tectonism and comminution stages of till genesis. Major elements of the site are bedrock rafts, glaciotectonic breecias, immature till and mature till. In all cases > 98% of the elements comprise Carboniferous limestone. Research at Fanore has focused on textural properties. Analysis of bulk samples of the sediments demonstrates a continuum of textural development from the glaciotectonism of the bedrock (breecia production and bedrock raft comminution) to a homogenized but immature till and to a more mature matrix-dominated deposit.  相似文献   

4.
The net effect of ice‐flow shifts resulting in the dilution or reworking of clasts on a single preserved till sheet is often unknown yet has major implications for palaeoglaciology and mineral exploration. Herein, we analyse variations in till clast lithologies from a single till sheet, within palimpsest‐type Glacial Terrain Zones in NE Manitoba, Canada, to better understand sediment–landform relationships in this area of high landform inheritance. This near‐ice‐divide area is known to consist of a highly fragmented subglacial landscape, resulting from spatio‐temporal variations in intensity of reworking and inheritance throughout multiple glacial events (subglacial bed mosaic). We show that a seemingly homogenous ‘Keewatin’ till sheet is composed of local (>15 km) and continental‐scale (～100‐km‐long carbonate train and 350–600 km long Dubawnt red erratic train) fan, irregular (amoeboid) or lobate palimpsest dispersal patterns. Local dispersal is more complex than the preserved local landform flowset(s) record, but appears consistent with the overall glacial history reconstructed from regional flowset and striation analyses. The resultant surface till is a spatial mosaic interpreted to reflect variable intensities in modification (overprinting) and preservation (inheritance) of a predominately pre‐existing till sheet. A multi‐faceted approach integrating till composition, regional landforms, ice‐flow indicators, and stratigraphic knowledge is used to map relative spatio‐temporal erosion/reworking intensity.  相似文献   

5.
Dispersal patterns of indicator rocks in central Gaspésie reveal that glacial debris is entrained in a basal debris-rich zone of shearing where clast diffusion takes place. The Grand-Volume Till forms a thin till sheet over the high plateaus of Gaspésie Peninsula and resulted from a succession of two Wisconsinan ice flows of distinct orientations (SSE and NE). The lithological composition of this till determined by pebble counts and the three-dimensional dispersal patterns of indicator rocks in it suggest that debris transport occurred principally by simple shear deformation of glacial debris. In addition, the intermixing of clasts at the intersection of two lithologically distinct dispersal trains of SSE and NE orientations, respectively, suggests that extensive mixing takes place during shearing. Physical interactions among the clasts lead to both upward and downward movements which cause the clasts to diffuse across the zone of shearing. This process of shear-diffusion results in continuous incorporation and mixing of the newly encountered rock types during glacial transport.  相似文献   

6.
An extensive set of proxy-data was acquired from eastern and central Denmark in order to study the dynamic behaviour of the southwestern margin of the last Scandinavian Ice Sheet. We examine the last three glacier advances of the Late Weichselian: the Main advance from central Sweden, representing the maximum ice extent at this time ( c. 21–20 ka BP), and the two succeeding Baltic advances ( c. 18–15 ka BP). Directional properties from tills and glaciotectonic overprints are used to reveal large-scale flowline patterns. Together with the geomorphological outline of ice margins, flowlines were successively more fan-shaped, indicating that the dependence of the subglacial topography increases as ice advances become younger. It is suggested that while the ice thickness decreases, more lobate configurations of ice margins are created as a result. Clast-compositional data derived from the fine-gravel fraction in tills are used to reconstruct dispersal patterns of erratic material. The dispersal patterns during the three advances show a gradually diminishing influence of local Pre-Quaternary bedrocks and older glacial deposits, and progressively longer transport distances of far-travelled erratics. We speculate that the principal factor governing this development is a successively decreasing interaction between the ice and its bed, which influences the concentration of erratics, debris comminution processes and the basal ice velocity. We envisage the Main advance from central Sweden as a slow-flowing inter-stream ice body with high bed interaction compared to the succeeding Baltic advances, which we regard to have been rapid flowing ice streams with limited bed interaction.  相似文献   

7.
The distribution of basal drag zones (sticky spots) underneath palaeo‐ice streams or lobes is largely unknown. We investigated the centre of the large (300 km long and up to 400 km wide) deglacial Hayes Lobe in NE Manitoba, Canada, by focusing on surficial till and its composition to get insights into dispersal patterns and their potential relationships to areas of basal drag. Subglacial bed roughness is a good criterion to identify areas of basal drag, but till composition may provide important insights across smoother beds. The onset zone of the Hayes Lobe overlies Palaeozoic Carbonate Platform rocks, whereas the majority of the lobe overlies the low‐lying Canadian Shield. We show that, within a 3500‐km2 central area of this lobe, calcareous detritus within the till has been transported over 100 km within subglacial environments of reduced ice‐bed coupling and fast ice flow. Six per cent of samples (n = 782), however, outline 0.2 to 4 km wide spots with a dominantly local composition. The glacial history and composition indicate that the till within these spots contains high inheritance from a pre‐Late Wisconsinan ice‐flow phase, which we suggest was protected beneath sticky spots (low erosion, high strength) during transport of substantial calcareous detritus to the area. Furthermore, our findings show that local till spots are present within streamlined landforms, as well as till blankets or veneers over bedrock. This diverse geomorphology indicates that the process of drumlinization within the deglacial Hayes Lobe does not appear to have been responsible for significant sediment transport or deposition across the study area. The overall record thus indicates potentially complex spatiotemporal shifts between calcareous till deposition, sticky conditions, erosion and drumlinization – which supports the subglacial bed mosaic model.  相似文献   

8.
Debris transported by glacier is derived either supraglacially from nunataks and valley sides or from erosion of the subglacial bed. Debris produced above the glacier by fracturing of rock walls has a dominant coarse fraction with angular boulders. Subsequent englacial or supraglacial transport is relatively passive and little comminution occurs. Debris eroded from subglacial bedrock is initially transported in a basal zone of traction, where particles frequently come into contact with the glacier bed and are retarded by it so that large forces may be generated between particles and the bed and at interparticle contacts. The material introduced into this tractional zone may be subglacial bedrock which has undergone a crushing-plucking event and which has a dominant coarse fraction, or supraglacially derived material which finds its way to the glacier bed. These parent debris assemblages are further comminuted by failure in response to locally concentrated compressive stresses, and attrition at shearing interfaces. Boulders transported through the tractional zone will tend to be rounded and bear several directions of striation. Large boulders embedded in lodgement till will tend to be streamlined with striae parallel to glacier flow and with an abruptly truncated distal extremity, rather like a roche moutonnée. Textural and boulder shape characteristics can be used to help distinguish different types of till.  相似文献   

9.
It is standard practice to measure particle fabrics in glacial studies to infer palaeo‐ice flow directions and processes of till formation but few studies examine the relationships between particle fabrics at different (i.e. the macro‐ and micro‐) scales. This knowledge is critical to inform the utility of the methods and limitations of the associated interpretations. Micro‐ (sand grain) and macro‐ (pebble) fabrics of pebble‐rich, sandy subglacial till (Kamloops Lake till) deposited by the Cordilleran Ice Sheet, south‐central British Columbia, were compared to assess their similarities and differences, and therefore their utility for understanding subglacial processes. Before comparisons were made, the data were tested for robustness by assessing various controls (e.g. sampling face orientation, number of particles measured, statistical variation resulting from sampling effects, particle shape, size and concentration) on particle fabrics. A new method of microfabric analysis was applied that involves the identification and delineation of distinct clusters of similarly orientated sand grains in order to compare them with macrofabrics and inferred ice‐flow directions. The results show that microfabrics, on their own, are an unreliable indicator of ice‐flow direction in Kamloops Lake till in the study area and should not be used as a substitute for macrofabric data, as they probably record late‐stage microscale strain patterns and pore‐water flow in addition to till deposition and deformation by overriding ice. We suspect that this would also be the case for coarse‐grained till elsewhere. Our findings suggest that till microfabric interpretations should always be made after assessing corresponding macrofabric data alongside sedimentological and structural observations.  相似文献   

10.
Composition and fabric of different moraines in the glaciated areas of Central Caucasus were studied to elucidate sedimentary environments and geomorphological processes. Methods used included particle-size distribution, pebble and mineral counts, shape analysis of pebbles, and till fabric analysis. Samples were taken from superglacial and basal debris, marginal moraine ridges and till horizons, and quantitative parameters were established for different glacial environments and till accumulation processes. Considerable differences in composition and fabric of superglacial and basal debris were caused by their specific transport conditions. Most marginal moraines consist of material similar to basal debris and only the topmost parts of some ridges have a noticeable incorporation of superglacial debris. These results point to considerable erosion of mountain valleys by temperate glaciers. Previous geomorphological investigations have emphasized the importance of superglacial debris in the formation of marginal moraines by alpine glaciers, but this viewpoint is not supported by the studies performed.  相似文献   

11.
This study investigates the variations in erosional processes beneath Briksdalsbreen; a Norwegian valley glacier, with a thin coarse grained deforming bed. The subglacial zone was investigated in situ, close to the central glacial flow line (Site A) and close to the valley wall (Site B), via boreholes. The till was collected using two different sediment samplers and the bed was examined using a borehole video camera. In order to evaluate how representative borehole sampling was of the subglacial environment, the results from in situ subglacial samples were compared with random samples taken from an exposed subglacial surface in the glacier foreland, as well as a sample taken from the site after glacier retreat. The results indicated that the texture of the exposed subglacial surface was similar to in situ samples from subglacial Site B (close to the valley wall), and that the samples collected with the ‘small’ sediment sampler had the closest fit. SEM analysis revealed eroded quartz grains at both sites as a result of rotation (abrasion) and fracture. The samples from close to the valley wall were very poorly sorted, with evidence for rounding and preservation of pre-weathered surfaces, which suggest that a relatively simple pattern of erosion from crushing to rotation dominated. However, the till from the centre of the glacier was better sorted, more angular, and with few pre-weathered surfaces. We suggest that this results from a more complex glacial erosional history associated with greater strain and longer residence time within the deforming layer. When compared with other deformation tills, it was confirmed that there is a relationship between grain size and erosional style. Clay-rich tills show little comminution, fine sand-rich tills generate a significant silt component, whilst the coarse sand-rich tills at Briksdalsbreen showed complex deformational styles but no significant silt component.  相似文献   

12.
To improve comminution efficiency, the effects of several process parameters on the comminution capability of high pressure water jet mill were investigated. Fractal dimension of particle size distribution, as an index of water jet mill comminution capability, was used for describing the fineness of the comminution product. Nine process parameters including the pump pressure, the mixing tube length and diameter, the coal particle mass flow rate, the diameter of feed material particle, the standoff distance, loading times, hardness of the target and the impact angle were investigated individually. The results obtained from this study provide deeper insight into the high pressure water jet comminution technology and a basis for process parameters optimization. We also show that the fractal dimension of particle size distribution can be used to monitor the comminution capability and estimate the degree of particle comminution.  相似文献   

13.
Quartz silt is a widespread detrital sediment with large aeolian (loess) and alluvial silt deposits forming important components of many contemporary landscapes. Despite research findings which indicate that a range of opportunities exist for the comminution of quartz into silt particles within a wide variety of geomorphic environments (e.g. glacial grinding, fluvial comminution, aeolian abrasion, frost weathering, salt weathering, insolation weathering and deep weathering), the ‘glacial-aeolian’ hypothesis has traditionally been favoured as the most likely explanation for loess formation and loess is seen as primarily a Quaternary phenomenon. As a consequence there has been a tendency to underestimate sediment inputs into loess systems by geomorphological processes operating within pre-Quaternary environments. In particular, earth scientists may have considerably underestimated the role of weathering in global silt generation, as there are now many references to the existence of a patchy but widespread distribution of pre-Quaternary weathering profiles across the glacial and periglacial landscapes of the Northern Hemisphere (e.g. North America, British Isles, north and central Europe), landscapes within which many of the classical loess deposits are located. These observations suggest that weathering profiles may have covered large tracts of the Northern Hemisphere land surface prior to the Quaternary glaciations. This, in turn, may have important implications for quartz silt generation as: (1) experimental studies indicate that many weathering processes are capable of generating significant quantities of silt-sized debris, and (2) particle characteristics displayed by saprolitic material that has developed on quartz rich crystalline source rocks often include significant quantities of either silt-sized material, or quartz grains that are weakened by weathering derived microfractures. Thus, weathering profiles may represent ‘mines’ of actual and potential quartz silt, available for release into sedimentary systems when these profiles are subsequently reworked by geomorphological processes such as glacial, fluvial and aeolian erosion.  相似文献   

14.
Hilda Glacier, a small cirque glacier in the Canadian Rocky Mountains, yields two principal types of sediment: ablation till, deficient in fine material and produced by rockfalls and avalanches falling on to the glacier surface, and basal lodgement till, rich in fines and formed mainly by subglacial erosion. Recent recession from its Neoglacial maximum has exposed large areas of basal till with thin veneers of ablation till which, when combined with present subglacial and supraglacial debris, provide abundant material for erosion and transport by the mcltwatcr stream. Sediment transport measurements over two summers (1977–1978) showed that bed load and suspended load occur in approximately equal proportions and that dissolved loads are minor. Local source variations, especially bank slumps, are a major cause of scatter in sediment rating curves. Suspended-sediment concentrations are greater early in the melt season due to availability of loose sediment produced by freezing and thawing. Other contributors to scatter in suspended-sediment rating curves include rain showers and diurnal hysteretic effects. Although the distinction between bed load and suspended load is never sharp, available data suggest that the sand/ gravel grain-size boundary (-1ø) approximates the suspendcd-load/bed-load division for characteristic Hilda flows transporting gravel. This approximation, combined with till grain-size analyses, suspended-sediment measurements, and spatial distributions of till types, leads to the following computations of fluvial sediment sources: for suspended load - 6% supraglacial, 47% subglacial, 47% channel banks; for bed load - 46% supraglacial, 27% each subglacial and channel banks. Supraglacial debris provides only about one-fourth of all fluvial sediment, but nearly half of the bed load.  相似文献   

15.
电子自旋共振(ESR)技术是一种确定物质成分和结构的顺磁性质的分析方法,也能够用于沉积物定年。该方法的测量技术和测年的物理机制等还处于发展阶段。冰川作用过程十分复杂,形成各种类型的冰川沉积物,其顺磁信号的归零机制有显著差异,ESR测年的实验方案也有所差异。因此,识别冰碛物类型,采集合适的样品对于ESR测年的准确性十分重要。冰下融出碛和滞碛经过了冰下磨蚀过程,结构致密,细颗粒基质含量高,石英砂中的一些杂质芯的ESR信号能够衰退。许多冰上融出碛,结构疏松,但细颗粒基质含量高,不但经过了搬运过程中的冰下磨蚀过程使ESR信号衰退,又经历了沉积时的冰上阳光直射过程使信号衰退,一些样品的ESR信号能够完全晒退。冰水湖泊和冰水河流沉积的细砂和粉砂来源于冰下研磨的产物,信号会衰退;在搬运沉积过程中又可能被阳光直射,信号进一步衰退。其它类型的冰碛物的ESR信号衰退机制不明,或粒径不适合用ESR方法测年。采集冰碛物ESR年代样品时,最好同时采集信号衰退机制相同的现代冰碛物样品,以便对照,并用于扣除可能的残留信号。  相似文献   

16.
《Quaternary Science Reviews》2007,26(19-21):2354-2374
The glacial sediments of north Norfolk are a type site for subglacial deforming bed sediments. This investigation focussed on subglacial shear zone process at the field and thin section scale, in order to understand subglacial processes, as well as considering the implications for regional stratigraphies. The sandy and chalky tills from three sites (within 1 km) at Weybourne, Norfolk, showed evidence for subglacial deformation associated with simple shear, producing extension, compression and rotation. It was demonstrated how these processes interacted to cause chalk fragmentation and predictable fabric strengths (dependant on sorting and grain size). It is suggested that the ‘Marly Drift’ is a diachronous unit, and the resultant stratigraphy at Weybourne reflects one deformation till, resulting from a series of ice advances, but with a lithology derived from the local chalk bed rock (with some far travelled erratics), which have undergone different degrees of chalk fragmentation reflecting the nature and duration of the subglacial deformation.  相似文献   

17.
Paleozoic fossiliferous limestones from the Hudson Bay area were dispersed southeastward a total distance of 110 km in the Québec part of theJames Bay Lowlands during the surging Cochrane flow event of the Laurentide Ice Sheet. The dispersal by the surging ice appears comparable to non-surging ice dispersal events elsewhere in terms of the dispersal index and the half distance of transportation; however, the total distance of transportation of the limestone clasts and their relatively high abundance far away from their source suggest that part of the transport of the debris during the surge was englacial, with the load later deposited as a surface mantle, or that the flow of the surging ice was limited to rapid basal sliding, with little or no internal shear within the ice mass. The glacial transport characteristics of earlier non-surging flow events in the same area were determined using the Total Transport Distance (TTD) method of measurements. Based on an indirect measurement of the half distance of transportation, the Selbaie till is characterized by longer transport distance than the Matheson till, and the Nouveau-Québec till has the shortest transport distance of all the tills of the area.  相似文献   

18.
This paper summarizes advances since 1987 in the application of glacial sediment sampling to mineral exploration (drift prospecting) in areas affected by continental or alpine glaciation. In these exploration programs, clastic glacial sediments are tested by geochemical or mineralogical methods to detect dispersal trains of mineral deposit indicators that have been glacially transported from source by mechanical processes. In glaciated terrain the key sampling medium, till, is produced by abrasion, crushing and blending of rock debris and recycled sediment followed by down-ice dispersal ranging from a few metres to many kilometres. As a consequence of the mid-1980s boom in gold exploration, the majority of case studies and regional till geochemical surveys published in the past decade deal with this commodity. Approximately 30% of Canada and virtually all of Fennoscandia have been covered by regional till geochemical surveys that aid mineral exploration and provide baseline data for environmental, agricultural, and landuse planning. The most profound event in drift prospecting in the last decade, however, has been the early-1990s explosion in diamond exploration which has dramatically increased the profile of glacial geology and glacial sediment sampling and stimulated changes in sampling and analytical methods.  相似文献   

19.
This paper presents the first integrated macroscale and microscale examination of subglacial till associated with the last‐glacial (Fraser Glaciation) Cordilleran Ice Sheet (CIS). A new statistical approach to quantifying till micromorphology (multivariate hierarchical cluster analysis for compositional data) is also described and implemented. Till macrostructures, macrofabrics and microstructures support previous assertions that primary till in this region formed through a combination of lodgement and deformation processes in a temperate subglacial environment. Macroscale observations suggest that subglacial environments below the CIS were probably influenced by topography, whereby poor drainage of the substrate in topographically constricted areas, or on slopes adverse to the ice‐flow direction at glacial maximum, facilitated ductile deformation of the glacier bed. Microscale observations suggest that subglacial till below the CIS experienced both ductile and brittle deformation, including grain rotation and squeeze flow of sediment between grains under moist conditions, and microshearing, grain stacking and grain fracturing under well‐drained conditions. Macroscale observations suggest that ductile deformation events were probably followed by brittle deformation events as the substrate subsequently drained. The prevalence of ductile‐type microstructures in most till exposures investigated in this study suggests that ductile deformation signatures can be preserved at the microscale after brittle deformation events that result in larger‐scale fractures and shear structures. It is likely that microscale ductile deformation can also occur within distributed shear zones during lodgement processes. Cluster analysis of microstructure data and qualitative observations made from thin sections suggest that the relative frequency of countable microstructures in this till is influenced by topography in relation to ice‐flow direction (bed drainage conditions) as well as by the frequency and distribution of voids in the till matrix and skeletal grain shapes.  相似文献   

20.
Passchier, S., Laban, C., Mesdag, C.S. & Rijsdijk, K.F. 2010: Subglacial bed conditions during Late Pleistocene glaciations and their impact on ice dynamics in the southern North Sea. Boreas, Vol. 39, pp. 633–647. 10.1111/j.1502‐3885.2009.00138.x. ISSN 0300‐9483. Changes in subglacial bed conditions through multiple glaciations and their effect on ice dynamics are addressed through an analysis of glacigenic sequences in the Upper Pleistocene stratigraphy of the southern North Sea basin. During Elsterian (MIS 12) ice growth, till deposition was subdued when ice became stagnant over a permeable substrate of fluvial sediments, and meltwater infiltrated into the bed. Headward erosion during glacial retreat produced a dense network of glacial valleys up to several hundreds of metres deep. A Saalian (MIS 6) glacial advance phase resulted in the deposition of a sheet of stiff sandy tills and terminal moraines. Meltwater was at least partially evacuated through the till layer, resulting in the development of a rigid bed. During the later part of the Saalian glaciation, ice‐stream inception can be related to the development of a glacial lake to the north and west of the study area. The presence of meltwater channels incised into the floors of glacial troughs is indicative of high subglacial water pressures, which may have played a role in the onset of ice streaming. We speculate that streaming ice flow in the later part of the Saalian glaciation caused the relatively early deglaciation, as recorded in the Amsterdam Terminal borehole. These results suggest that changing subglacial bed conditions through glacial cycles could have a strong impact on ice dynamics and require consideration in ice‐sheet reconstructions.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号