共查询到20条相似文献，搜索用时 390 毫秒
1.
在使用电偶极发射源的可控源电磁法(CSEM)勘探中,发射源的方位、长度、形状等对观测数据有重要的影响,然而现有的大部分三维数值模拟方法没有全面地将这些因素考虑进来,很多都只能应对非常简单的场源形态,例如单一方位的点电偶极子,这有可能显著降低模拟结果的准确性.本文实现了基于交错网格有限体积(FV)离散的海洋CSEM三维正演算法,能够模拟形态相对复杂的场源,包括任意方位的有限长直导线和弯曲导线发射源.该算法使用一次场/二次场方法,只需对二次场使用FV法求解,避免了场源的奇异性问题;一次场的计算为一维正演问题,使用准解析法求解,并且只要在计算一次场时考虑复杂的场源形态便可以实现同样场源的三维正演.通过与一维理论模型的解析解对比验证了三维程序的准确性,并针对三维理论模型进行了一系列正演测试,初步考察了场源形态对三维正演结果的影响. 相似文献
2.
The electromagnetic response of a horizontal electric dipole buried in a multi‐layered earth 
下载免费PDF全文
下载免费PDF全文 The electromagnetic response of a horizontal electric dipole transmitter in the presence of a conductive, layered earth is important in a number of geophysical applications, ranging from controlled‐source audio‐frequency magnetotellurics to borehole geophysics to marine electromagnetics. The problem has been thoroughly studied for more than a century, starting from a dipole resting on the surface of a half‐space and subsequently advancing all the way to a transmitter buried within a stack of anisotropic layers. The solution is still relevant today. For example, it is useful for one‐dimensional modelling and interpretation, as well as to provide background fields for two‐ and three‐dimensional modelling methods such as integral equation or primary–secondary field formulations. This tutorial borrows elements from the many texts and papers on the topic and combines them into what we believe is a helpful guide to performing layered earth electromagnetic field calculations. It is not intended to replace any of the existing work on the subject. However, we have found that this combination of elements is particularly effective in teaching electromagnetic theory and providing a basis for algorithmic development. Readers will be able to calculate electric and magnetic fields at any point in or above the earth, produced by a transmitter at any location. As an illustrative example, we calculate the fields of a dipole buried in a multi‐layered anisotropic earth to demonstrate how the theory that developed in this tutorial can be implemented in practice; we then use the example to examine the diffusion of volume charge density within anisotropic media—a rarely visualised process. The algorithm is internally validated by comparing the response of many thin layers with alternating high and low conductivity values to the theoretically equivalent (yet algorithmically simpler) anisotropic solution, as well as externally validated against an independent algorithm. 相似文献
3.
4.
In present‐day land and marine controlled‐source electromagnetic (CSEM) surveys, electromagnetic fields are commonly generated using wires that are hundreds of metres long. Nevertheless, simulations of CSEM data often approximate these sources as point dipoles. Although this is justified for sufficiently large source‐receiver distances, many real surveys include frequencies and distances at which the dipole approximation is inaccurate. For 1D layered media, electromagnetic (EM) fields for point dipole sources can be computed using well‐known quasi‐analytical solutions and fields for sources of finite length can be synthesized by superposing point dipole fields. However, the calculation of numerous point dipole fields is computationally expensive, requiring a large number of numerical integral evaluations. We combine a more efficient representation of finite‐length sources in terms of components related to the wire and its end points with very general expressions for EM fields in 1D layered media. We thus obtain a formulation that requires fewer numerical integrations than the superposition of dipole fields, permits source and receiver placement at any depth within the layer stack and can also easily be integrated into 3D modelling algorithms. Complex source geometries, such as wires bent due to surface obstructions, can be simulated by segmenting the wire and computing the responses for each segment separately. We first describe our finite‐length wire expressions and then present 1D and 3D examples of EM fields due to finite‐length sources for typical land and marine survey geometries and discuss differences to point dipole fields. 相似文献
5.
本文基于非结构网格实现了海洋可控源电磁法三维有限元正演模拟.该算法采用完全非结构网格剖分,可以模拟任意起伏地形和复杂地电模型.为了避免场源的奇异性,采用一次场/二次场分解算法,一次场由基于Schelkunoff势函数的一维解析公式得到.为了提高算法的精度和效率,采用对测点附近单元和异常体区域进行体积约束加密的方法,实现了非结构网格的局部加密.一、二维模型计算和分析表明,本文采用的局部加密方法能够明显地改善算法的精度,最大相对误差基本在1%以内.对三维模型计算及对比分析,说明了该算法对三维可控源电磁正演的实用性.复杂海底地形模型的正演模拟表明,海底地形对电磁场的影响很大,在进行海洋可控源电磁资料解释时,地形的影响有必要考虑在内. 相似文献
6.
讨论了地面可控源电磁勘探三维非线性共轭梯度反演的可行性以及反演过程中考虑场源的必要性.反演采用非线性共轭梯度反演方法.反演过程中,模型响应利用交错网格有限差分技术计算.反演数据采用与发射源平行的电场x分量Ex.利用层状导电模型作为背景,设计了两个理论模型进行数值试验:第一个模型中包含两个电阻率异常,以检验反演的有效性;第二个模型中,在测区外设置了一个低阻异常,以考察源的信息在反演中的作用.两个模型的反演分别从层状背景模型开始,迭代120次后终止.数值试验结果表明,(1)非线性共轭梯度反演所获得的电阻率分布和理论模型吻合较好;(2)非线性共轭梯度算法收敛速度较慢,需要较多的迭代次数完成反演;(3)对于可控源频率电磁勘探,必须考虑源位置信息.因此,本文采用考虑场源信息的地面可控源非线性共轭梯度反演方法能完成真正意义上的可控源频率电磁测深数据的反演. 相似文献
7.
Electromagnetic fields in a steel-cased borehole 总被引：1，自引：0，他引：1
The development of an electromagnetic numerical modelling scheme for a magnetic dipole in an arbitrary casing segment in an inhomogeneous conductivity background has been difficult, due to the very high electrical conductivity and magnetic permeability contrasts between the steel casing and the background medium. To investigate the effect of steel casing efficiently, we have developed an accurate but simple finite‐element modelling scheme to simulate electromagnetic fields in a medium of cylindrically symmetric conductivity structures. In order to preserve the cylindrical symmetry in the resulting electromagnetic fields, a horizontal loop current source is used throughout. One of the main advantages of the approach is that the problem is scalar when formulated using the azimuthal electric field, even if the casing is both electrically conductive and magnetically permeable. Field calculations have been made inside the cased borehole as well as in another borehole which is not cased. Careful analyses of the numerical modelling results indicate that the anomaly observed in a cross‐borehole configuration is sensitive enough to be used for tomographic imaging. 相似文献
8.
电磁场数值模拟的背景场/异常场算法是三维正演的有效策略之一,优点为采用解析法计算电磁场背景场代替场源项、克服了场源奇异性,缺点为不适用于发射源布置于起伏地表或背景模型复杂的情形.总场算法是直接对电磁场总场开展数值模拟,其难点是有效加载场源、保证近区与过渡区数值解精度.本文以水平电偶源形式分段加载接地长导线源,并以电场总场Helmholtz方程为矢量有限元法控制方程,实现了基于非结构化四面体网格剖分的接地长导线源频率域电磁法三维正演.通过与均匀全空间中水平电偶源产生的电场解析解对比,验证了本文算法的正确性,并分析了四面体外接圆半径与其最短棱边的最大比值和四面体二面角最小值对数值解精度的影响规律.通过与块状高导体地电模型的积分方程法、有限体积法和基于磁矢量势Helmholtz方程的有限元法数值解对比,进一步验证了本文算法正确性,同时说明了非结构化四面体网格能够更加精细地剖分电性异常体,利于获得精确数值解. 相似文献
9.
Patrick S. Debroux 《Geophysical Prospecting》1996,44(3):457-468
A publicly available and maintained electromagnetic finite-difference time domain (FDTD) code has been applied to the forward modelling of the response of 1D, 2D and 3D geophysical targets to a vertical magnetic dipole excitation. The FDTD method is used to analyse target responses in the 1 MHz to 100MHz range, where either conduction or displacement currents may have the controlling role. The response of the geophysical target to the excitation is presented as changes in the magnetic field ellipticity. The results of the FDTD code compare favourably with previously published integral equation solutions of the response of 1D targets, and FDTD models calculated with different finite-difference cell sizes are compared to find the effect of model discretization on the solution. The discretization errors, calculated as absolute error in ellipticity, are presented for the different ground geometry models considered, and are, for the most part, below 10% of the integral equation solutions. Finally, the FDTD code is used to calculate the magnetic ellipticity response of a 2D survey and a 3D sounding of complicated geophysical targets. The response of these 2D and 3D targets are too complicated to be verified with integral equation solutions, but show the proper low- and high-frequency responses. 相似文献
10.
在海洋可控源电磁法勘探中,接收站常置于海底.在进行海洋电磁场模拟时,由于海水和海底介质存在显著电性差异,这给海底接收点处场值的求取带来困难.本文提出一种新的接收点插值算法,该算法考虑到海底电场法向分量不连续性问题,用法向电流分量进行插值以准确求取海底任意接收点处电磁场值.本文利用交错网格有限差分法实现了二维介质中频率域海洋可控源法(CSEM)正演.对构造走向做傅里叶变换,将三维电磁模拟问题转换为波数域2.5维问题,即三维场源激励下针对二维地电模型的电磁模拟问题.使用交错网格有限差分法,基于一次场/二次场分离方法导出波数域二次电场离散形式,并进一步求得波数域电磁场.采用本文提出的改进的插值算法可求得海底任意接收点处波数域电磁场,采用傅里叶逆变换对波数域电磁场进行积分可得到接收点处空间域电磁场.模型算例表明,与常规的线性插值和严格插值算法相比,本文提出的改进的插值算法具有更高的精度. 相似文献
11.
为快速有效地研究、考察各向异性地层条件下多分量感应测井的响应特征,本文利用电场标势与矢势的有限体积法研制出三维频率域电磁场响应的数值模拟算法,克服由低频发射或高阻地层产生的低感应数问题,有效提高了三维电磁数值模拟算法的应用范围和计算效率.首先利用电场的标势与矢势将Maxwell方程转化为满足库仑规范条件的耦合势Helmholtz方程,以Yee氏交错非均匀网格中不同位置上的节点为中心建立四种控制体积单元,通过对控制体积单元中电磁场与电导率的积分平均实现耦合势方程和磁偶极子旋度的离散,并得到一个对角占优的大型稀疏复线性代数方程组,然后,通过不完全LU分解预处理和稳定双共轭梯度法快速求解离散方程.数值结果证明了该算法的有效性,并进一步考查了仪器偏心、倾斜井、垂直裂缝等复杂条件下多分量感应的响应特征. 相似文献
12.
本文给出一种用积分方程法配合有限差分法计算位于导电介质中三维导体的电磁响应的新途径,在二层大地条件下给出了具体计算方法和结果。详细讨论了围岩介质的导电性对导体异常的影响。这对于开展低阻覆盖层地区的电磁法工作具有一定的指导意义。 相似文献
13.
频率域地空电磁探测方法是指在地面布设人工场源,在空中测量电磁场的一种高效的地球物理勘探技术.该方法具有大范围、高通过性、快速测量的优势,尤其适合崎岖山地、沙漠、沼泽、海陆交互带等复杂地貌区域的资源勘查.但是这些地区的地形起伏通常较大,因此分析地形对地空电磁响应的影响具有重要意义.本文利用有限元法对频率域地空电磁响应进行了正演计算,分析了起伏地表条件下的频率域地空电磁响应特征.首先利用傅里叶变换将2.5维问题转化成二维问题,利用伽辽金加权余量法推导了相应的离散有限元方程组.采用任意四边形单元对区域进行不均匀网格剖分,源和异常体附近网格加密处理,保证计算精度,远离目标区域网格逐渐稀疏,模拟无穷远边界,降低对计算资源的要求.在单元内进行插值,将有限元方程组变换为线性方程组,采用总场算法,利用具有一定面积的伪δ函数表达源电流分布,源项近似为分布在以电偶极源为中心的25个节点上.通过求解线性方程组得到波数域电磁响应,再对波数域电磁场响应进行反傅里叶变换从而获得空间域2.5维频率域电磁场值.通过对比2.5维正演结果与均匀半空间解析解,验证了本文算法的精度,同时本文还对地空电磁场与地面电磁场的响应特性进行了对比. 相似文献
14.
15.
16.
17.
从可控源电磁法的基本原理出发,推导了基于电场矢量波动方程的三维边值问题,利用广义变分原理,把边值问题转换为变分问题,并引入散度条件,避免了伪解的出现,使有限元计算在理论上更加完备.在准静态近似条件下,把水平电偶极子在空中和大地的远区电场闭合表达式作为有限元计算中的区域外边界条件,解决了边界条件加载的困难;把应用于地震模拟中的伪delta函数引入到可控源电磁法中的三维有限元模拟中,消除了源点的奇异性,提高了方程组的稳定性.通过对均匀大地和层状介质模型的模拟,检验了程序的正确性,并对典型的地质体模型进行了数值模拟,分析了其变化规律. 相似文献
18.
为进一步了解井间地下介质结构及其电性特征,本文用时域有限差分方法(FDTD),实现了井间电磁场响应的数值模拟.激发源是探测深度相对磁偶极子更大一些的电偶极子,首先选择一个位于井轴上的垂直电偶极子作为场源,并假设参与计算的介质相对于发射井井轴是轴向对称的,这样可将研究区域作为二维问题处理.推导了二维井间电磁波传播时域差分公式.该方法适用于任何方向入射的电偶极子源,尤其善于解决频域差分方法所难以描述的宽频脉冲.给出了井间金属圆柱和矿体圆柱数值模拟2个例子,结果表明,时域有限差分方法能有效的模拟井间地下介质中电磁波的传播,揭示电磁波传播规律.该方法速度快、精度高、结果稳定,适合用于井间电磁场反演成像的正演响应计算. 相似文献
19.
Comparison of the time-domain electromagnetic field from an infinitesimal point charge and dipole source 总被引：2，自引：0，他引：2
An electromagnetic field is generated through the accelerating movement of two equal but opposite charges of a single dipole. An electromagnetic field can also be generated by a time-varying infinitesimal point charge. In this study, a comparison between the electromagnetic fields of an infinitesimal point charge and a dipole has been presented. First, the time-domain potential function of a point source in a 3D conductive medium is derived. Then the electric and magnetic fields in a 3D homogeneous lossless space are derived via the relation between the potential and field. The field differences between the infinitesimal point charge and the dipole in the step-off time, far-source, and near-source zones are analyzed, and the accuracy of the solutions from these sources is investigated. It is also shown that the field of the infinitesimal point charge in the near-source zone is different from that of the dipole, whereas the far-source zone fields of these two sources are identical. The comparison of real and simulated data shows that the infinitesimal point charge represents the real source better than the dipole source. 相似文献