首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
There are many melt and fluid inclusions (mainly CO2-rich) in olivine and pyroxene phenocrysts in basalts from the Ross Island area. The melt inclusions can be classified as follows: (1) crystalline melt inclusions (type I), (2) fluid-melt inclusions (type II) and (3) glass inclusions (type III). The daughter minerals in type I include olivine, plagioclase, ilmenite, etc. Fluid-melt inclusions are a new type which represent the immiscibility of magma and fluid at a particular stage of evolution. Three types of fluid-melt inclusions were examined in this study: a) crystal + liquid + gas, b) inclusions coexisting with glass inclusions and fluid inclusions, and c) crystal + daughter mineral (dissolved salt) + gas. Both primary and secondary melt inclusions are recognizable in the samples. The secondary melt inclusions were formed during healing of fractures in the host minerals in the process of magma rise. The homogenization temperatures (both Leitz 1350 stage and quench method were used) of melt inclusions in basalts range from 1190 to 135°C at high pressure (about 7 kbars), indicating that the basalts may have come from the upper mantle. Melt-fluid immiscibility in basaltic magma shows that the CO2-rich fluids may be the main fluid phase in the upper mantle, which are of significance in understanding the evolution of magma and various processes in the deep levels of the earth. The homogenization temperatures of melt and aqueous fluid inclusions in granites and metamorphic rocks in this area vary from 980 to 1100°C and 279 to 350°C, respectively.  相似文献   

2.
Carbon dioxide-rich fluid and carbonate-rich aluminosilicate melt inclusions in tantalite-(Mn) from the Alto do Giz pegmatite in the Borborema Pegmatite Province, northeastern Brazil were investigated to constrain the formation of the host crystals. The results demonstrate that in the Alto do Giz pegmatite, water- and alkaline carbonate-rich fluids and melts are responsible for the transport and deposition of tantalite-(Mn) at temperatures around 600°C and about 4 kbar. Moreover, evidence is presented to show that during crystallization of the tantalite-(Mn), three different components coexisted, which are now trapped as separate inclusions: two immiscible silicate melts (types A and B melt inclusions) and a CO2-rich aqueous fluid. We hypothesize that immiscible fluid separation may have been a critical factor in producing the water- and alkaline carbonate-rich fluids and melts necessary for Ta and Nb transport. Since the tantalite-(Mn) crystallized during pegmatite formation, this mechanism must also have implications for pegmatite genesis in general.  相似文献   

3.
Summary The low-pressure emplacement of a quartz diorite body in the metapelitic rocks of the Gennargentu Igneous Complex (Sardinia, Italy) produced a contact metamorphic aureole and resulted in migmatisation of part of the aureole through partial melting. The leucosome, formed by dehydration melting involving biotite, is characterised by granophyric intergrowth and abundant magnetite crystals. A large portion of the high temperature contact aureole shows petrographic features that are intermediate between quartz diorite and migmatite s.s. (i.e. hybrid rocks). A fluid inclusion study has been performed on quartz crystals from the quartz diorite and related contact aureole rocks, i.e. migmatite sensu stricto (s.s.) and hybrid rocks. Three types of fluid inclusions have been identified: I) monophase V inclusions, II) L + V, either L-rich or V-rich aqueous saline inclusions and III) multiphase V + L + S inclusions. Microthermometric data characterised the trapped fluid as a complex aqueous system varying from H2O–NaCl–CaCl2 in the quartz diorite to H2O–NaCl–CaCl2–FeCl2 in the migmatite and hybrid rocks. Fluid salinities range from high saline fluids (50 wt% NaCl eq.) to almost pure aqueous fluid. Liquid-vapour homogenisation temperatures range from 100 to over 400 °C with an average peak around 300 °C. Temperatures of melting of daughter minerals are between 300 and 500 °C. Highly saline liquid- and vapour-rich inclusions coexist with melt inclusions and have been interpreted as brine exsolved from the crystallising magma. Fluid inclusion data indicate the formation of fluid of high iron activity during the low-pressure partial melting and a fluid mixing process in the hybrid rocks.  相似文献   

4.
Rare-metal granites of Nuweibi and Abu Dabbab, central Eastern Desert of Egypt, have mineralogical and geochemical specialization. These granites are acidic, slightly peraluminous to metaaluminous, Li–F–Na-rich, and Sn–Nb–Ta-mineralized. Snowball textures, homogenous distribution of rock-forming accessory minerals, disseminated mineralization, and melt inclusions in quartz phenocrysts are typical features indicative of their petrographic specialization. Geochemical characterizations are consistent with low-P-rare metal granite derived from highly evolved I-type magma in the late stage of crystallization. Melt and fluid inclusions were studied in granites, mineralized veins, and greisen. The study revealed that at least two stages of liquid immiscibility played an important role in the evolution of magma–hydrothermal transition as well as mineral deposition. The early stage is melt/fluid case. This stage is represented by the coexistence of type-B melt and aqueous-CO2 inclusions in association with topaz, columbite–tantalite, as well as cassiterite mineral inclusions. This stage seems to have taken place at the late magmatic stage at temperatures between 450 °C and 550 °C. The late magmatic to early hydrothermal stage is represented by vapor-rich H2O and CO2 inclusions, sometimes with small crystallized silicic melt in greisen and the outer margins of the mineralized veins. These inclusions are associated with beryl, topaz, and cassiterite mineralization and probably trapped at 400 °C. The last stage of immiscibility is fluid–fluid and represented by the coexisting H2O-rich and CO2-rich inclusions. Cassiterite, wolframite ± chalcopyrite, and fluorite are the main mineral assemblage in this stage. The trapping temperature was estimated between 200 °C and 350 °C. The latest phase of fluid is low-saline, low-temperature (100–180 °C), and liquid-rich aqueous fluid.  相似文献   

5.
The Gyeongsang Basin of southeastern Korea contains numerous Cretaceous-early Tertiary (120–40 Ma) granitoid intrusions formed at a convergent plate boundary. The geotectonic setting is similar to that associated with porphyry-type mineralization elsewhere in the Circumpacific region. However, erosion has removed higher-level economic mineralization and exposed deeper levels of the granitoids, representing the poorly mineralized “bottoms” of porphyry copper systems. The intrusions of the Gyeongsang Basin thus provide a unique opportunity to advance our understanding of magmatic-hydrothermal evolution in the roots of porphyry-type systems, below the level of economic mineralization.

The physical and chemical environment during crystallization of the magmas has been characterized through studies of silicate melt and aqueous fluid inclusions in the granitoids. Two different types of silicate melt inclusions were recognized based on occurrence and room-temperature appearance. Type-I inclusions contain one or more crystalline phases and vapor; type-II inclusions consist of a cluster of small crystals, partially devitrified glass, and vapor. Petrographic and Raman analyses indicate that most silicate melt inclusions contain muscovite daughter crystals. Some also contain feldspar. Solidus temperatures of type-I inclusions in quartz phenocrysts range from ≈630to 650°C, whereas solidus temperatures of type-I and type-II inclusions in vug quartz are slightly higher (640–670°C). Liquidus temperatures span a much wider range compared to solidus temperatures, with maximum liquidus temperatures of melts in phenocrysts being slightly higher (≤930°C) than those in vug quartz (≤910°C).

Three types of aqueous inclusions were observed based on occurrence and room temperature phase proportions. Type-A inclusions are liquid rich and low to moderate in salinity; type-B inclusions are vapor rich and low in salinity; type-C inclusions are liquid rich and contain a halite daughter mineral. Some type- A inclusions with a salinity of approximately 25 wt% NaCl equivalent are spatially associated with silicate melt inclusions in phenocrysts, where they occur as three-dimensional clusters of tiny inclusions surrounding the silicate melt inclusion. Type-A inclusions also occur along fractures in quartz phenocrysts. Non-fracture-controlled type-C inclusions are rare in phenocryst quartz, but are common in vug quartz, where they are associated with silicate melt inclusions. Type-C inclusions that coexist with silicate melt inclusions generally homogenize by halite dissolution after the vapor bubble and show a wide range in salinity, from about 30 to >60 wt% NaCl equivalent. Coexisting halite-bearing (Type-C) and vapor-rich (Type-B) inclusions in phenocryst quartz suggest local immiscibility in the late-or post-magmatic fluid.

Pressure-temperature conditions during the final stages of magmatic-hydrothermal activity associated with the granitoid intrusions of the Gyeongsang Basin were approximately 630° to 670° C and 1.9 to 2.5 kbars. These results suggest that the granitoids do not contain economic porphyry coppertype mineralization because the magmas crystallized at high pressures (relative to typical porphyry copper magmas) and did not become saturated in water until a relatively late stage in the crystallization history. Failure to reach water saturation resulted in most of the copper in the original melt being sequestered as a trace component in earlier-crystallizing silicate and sulfide phases to produce anomalous but subeconomic copper grades. Furthermore, owing to the depth of emplacement, less energy was available to fracture the rocks when water did exsolve from the magma, and the pressure remained too high for aqueous fluid immiscibility to be an important metal-concentrating or depositing mechanism. Geological, petrographic, and geochemical characteristics suggest that the granitoid rocks of the Gyeongsang Basin represent ethroot zones of porphyry-type systems, and any higher-grade mineralization that may have been present higher in the system has since been removed by erosion.  相似文献   

6.
In this paper, we discuss the formation conditions of rhyolites and results of their interaction with later portions of basic magmas on the basis of the investigation of melt and fluid inclusions in minerals from a rhyolite xenolith and host neovolcanic basalts of the Cleft segment of the Juan de Fuca Ridge. In terms of bulk chemistry and the compositions of melt inclusions in pyroxene and olivine phenocrysts, the basic rocks of the southern part of this segment are typical MOR basalts. Their olivine, clinopyroxene, and plagioclase crystallized at temperatures of 1160–1280°C and a pressure range between 20 and 100 MPa. The xenolith is a leucocratic rock with negligible amounts of mafic minerals, which clearly distinguishes it from the known occurrences of silicic rocks in the rift valleys of MOR. The rhyolite melt crystallized at temperatures of 900–880°C. The final stages of rhyolite melt crystallization at temperatures of 780–800°C were accompanied by the release of a saline aqueous fluid with high chloride contents. Based on the geochemical characteristics of melt inclusions and melting products, it can be suggested that the magmatic melt was produced by melting of metamorphosed oceanic crust within the Cleft segment under the influence sof saline aqueous fluid trapped in the pores and interstices of the rock. The rock represented by the xenolith is a late differentiation product of such melts. The ultimate products of silicic melt fractionation show high volatile contents: H2O > 3.0 wt %, Cl ～ 2.0 wt %, and F ～ 0.1 wt %. The interaction of the xenolith with the host basaltic melt occurred at temperatures equal or slightly higher than those of ferrobasalt melts (1190–1180°C). During ascent the xenolith occurred for a few tens of hours in high-temperature basic magma, and diffusion exchange between the basaltic and silicic melts was very minor.  相似文献   

7.
Abstract, Results of a study of fluid inclusions in anhydrite from drill hole Y-6 in the Chicxulub crater, of northwestern Yucatan, Mexico, are reported in this work. The Chicxulub crater was formed at the Cretaceous-Tertiary boundary by a meteorite impact. The resulting ejection breccias are composed mostly of hydrothermally altered crystalline basement material. The mineral assemblage pyroxene + anhydrite + quartz is associated with the hydrothermal alteration. The analyzed fluid inclusions in the anhydrite show highly heterogeneous phase assemblages within the same crystal plane. Fluid inclusion types include liquid plus vapor inclusions (L+V), vapor-rich inclusions (V), and inclusions containing daughter crystals (L+V+S). The eutectic temperatures indicate a brine composition dominated by CaCl2-NaCl. Both the salinity and the homogenization temperatures show a wide range (from 3.6 to 23 wt% NaCl equivalent for the L+V inclusions, and 36 to 42 wt% NaCl equivalent for the L+V+S inclusions). The homogenization temperatures range from 100° to 500°C. These data represent cooling and boiling trends. We assume that the impact breccias were ejected at high temperature in an aqueous environment (above 500°C). This caused boiling of sea water and precipitation of anhydrite with its inclusions.  相似文献   

8.
Baerzhe Be–Nb–Zr–REE deposit is hosted in alkaline granite (125 Ma) which intrudes in the late Jurassic Baiyingaolao Formation in the middle of the Great Hinggan Metallogenic Belt in China. The ore‐forming granite consists of three lithological facies: arfvedsonite‐bearing alkaline granite at the bottom, aegirine‐bearing albite aplite in the middle and pegmatite crust on the top. The albite aplite is the main orebody. We recognized three magmatic‐hydrothermal stages: orthomagmatic stage, late‐magmatic stage and hydrothermal stage, with the late‐magmatic stage being divided into two substages, the pegmatite substage and the aplite substage. Petrographic study on the granite, the microthermometric study on fluid inclusions and in situ laser‐ablation inductively coupled plasma mass spectrometry analysis for quartz‐hosted melt inclusions reveal the process of magmatic‐hydrothermal evolution. The finding indicates that primary magma evolved to more peralkaline by fractional crystallization, with synchronously increasing high field strength elements. An extremely high content of Zr and Nb are in the melt inclusions from last stage albite aplite (Zr, min 52 548 ppm, and Nb, min 4104 ppm). This implies that the residual magma directly formed the orebody of rare metal elements. Meanwhile, volatility was increasing during the magma evolution process and F‐bearing aqueous fluid was oversaturated at temperatures higher than 800°C. The separation of fluid from magma caused Li‐REE enrichment in F‐bearing fluid and depletion in residual melt, and led to the difference of the Y/Ho ratio between whole rock compositions and melt inclusion data. Fluid separated into a high‐salinity liquid and a low density vapor phase above 697°C, and enriched REE in the high‐salinity liquid. The oxygen isotope data shows mixing between primary magmatic‐hydrothermal fluid and meteoric water. The ubiquitous pseudo‐secondary fluid inclusions have a wide range of salinity below 462°C, which is similar to the melting temperatures of REE‐bearing daughter minerals. A model involving the mixing by meteoric water could be a mechanism for precipitation of REE minerals.  相似文献   

9.
Melt inclusions were investigated in olivine phenocrysts from the New Caledonia boninites depleted in CaO and TiO2 and enriched in SiO2 and MgO. The rocks are composed of olivine and pyroxene phenocrysts in a glassy groundmass. The olivine phenocrysts contain melt inclusions consisting of glass, a fluid vesicle, and daughter olivine and orthopyroxene crystals. The daughter minerals are completely resorbed in the melt at 1200?C1300°C, whereas the complete dissolution of the fluid phase was not attained in our heating experiments. The compositions of reheated and naturally quenched melt inclusions, as well as groundmass glasses were determined by electron microprobe analysis and secondary ion mass spectrometry. Partly homogenized melts (with gas) contain 12?C16 wt % MgO. The glasses of inclusions and groundmass are significantly different in H2O content: up to 2 wt % in the glasses of reheated inclusions, up to 4 wt % in naturally quenched inclusions, and 6?C8 wt % in groundmass glasses. A detailed investigation revealed a peculiar zoning in olivine: its Mg/(Mg + Fe) ratio increased in a zone directly adjacent to the glass of inclusions. This effect is probably related to partial water (hydrogen) loss and Fe oxidation after inclusion entrapment. The numerical modeling of such a process showed that the water loss was no higher than a few tenths of percent and could not be responsible for the considerable difference between the compositions of inclusions and groundmass glasses. It is suggested that the latter were enriched in H2O after the complete solidification of the rock owing to interaction with seawater. Based on the obtained data, the compositions of primary boninite magmas were estimated, and it was supposed that variations in melt composition were related not only to olivine and pyroxene fractionation from a single primary melt but also to different degrees and (or) depths of magma derivation.  相似文献   

10.
The Dayingezhuang gold deposit, hosted mainly by Late Jurassic granitoids on Jiaodong Peninsula in eastern China, contains an estimated 170 t of gold and is one of the largest deposits within the Zhaoping fracture zone. The orebodies consist of auriferous altered pyrite–sericite–quartz granites that show Jiaojia-type (i.e., disseminated and veinlet) mineralization. Mineralization and alteration are structurally controlled by the NE- to NNE-striking Linglong detachment fault. The mineralization can be divided into four stages: (K-feldspar)–pyrite–sericite–quartz, quartz–gold–pyrite, quartz–gold–polymetallic sulfide, and quartz–carbonate, with the majority of the gold being produced in the second and third stages. Based on a combination of petrography, microthermometry, and laser Raman spectroscopy, three types of fluid inclusion were identified in the vein minerals: NaCl–H2O (A-type), CO2–H2O–NaCl (AC-type), and pure CO2 (PC-type). Quartz crystals in veinlets that formed during the first stage contain mainly AC-type fluid inclusions, with rare PC-type inclusions. These fluid inclusions homogenize at temperatures of 251°C–403°C and have low salinities of 2.2–9.4 wt% NaCl equivalent. Quartz crystals that formed in the second and third stages contain all three types of fluid inclusions, with total homogenization temperatures of 216°C–339°C and salinities of 1.8–13.8 wt% NaCl equivalent for the second stage and homogenization temperatures of 195°C–321°C and salinities of 1.4–13.3 wt% NaCl equivalent for the third stage. In contrast, quartz crystals that formed in the fourth stage contains mainly A-type fluid inclusions, with minor occurrences of AC-type inclusions; these inclusions have homogenization temperatures of 106°C–287°C and salinities of 0.5–7.7 wt% NaCl equivalent. Gold in the ore-forming fluids may have changed from Au(HS)0 as the dominant species under acidic conditions and at relatively high temperatures and fO2 in the early stages, to Au(HS)2– under neutral-pH conditions at lower temperatures and fO2 in the later stages. The precipitation of gold and other metals is inferred to be caused by a combination of fluid immiscibility and water–rock interaction.  相似文献   

11.
Mo-Bi mineralization occurs in subvertical and subhorizontal quartz-muscovite-± K-feldspar veins surrounded by early albitic and later K-feldspathic alteration halos in monzogranite of the Archean Preissac pluton, Abitibi region, Québec, Canada. Molybdenite is intergrown with muscovite in the veins or associated with K-feldspar in the alteration halos. Mineralized veins contain five main types of fluid inclusions: aqueous liquid and liquid-vapor inclusions, aqueous carbonic liquid-liquid-vapor inclusions, carbonic liquid and vapor inclusions, halite-bearing aqueous liquid and liquid-vapor inclusions, trapped mineral-bearing aqueous liquid and liquid-vapor inclusions. The carbonic solid in frozen carbonic and aqueous-carbonic inclusions melts in most cases at −56.7 ± 0.1 °C indicating that the carbonic fluid consists largely of CO2. All aqueous inclusion types and the aqueous phase in carbonic inclusions have low initial melting temperatures (≥70 °C), requiring the presence of salts other than NaCl. Leachate analyses show that the bulk fluid contains variable proportions of Na, K, Ca, Cl, and traces of Mg and Li. The following solids were identified in the fluid inclusions by SEM-EDS analysis: halite, calcite, muscovite, millerite (NiS), barite and antarcticite (CaCl2 · 6H2O). All are interpreted to be trapped phases except halite which is a daughter mineral, and antarcticite which formed during sample preparation (freezing). Aqueous inclusions homogenize to liquid at temperatures between 75 °C and 400 °C; the mode is 375 °C. Aqueous-carbonic inclusions homogenize to liquid or vapor between 210 °C and 400 °C. Halite-bearing aqueous inclusions homogenize by halite dissolution at approximately 170 °C. Aqueous inclusions containing trapped solids exhibit liquid-vapor homogenization at temperatures similar to those of halite-bearing aqueous inclusions. Temperatures of vein formation, based on oxygen isotopic fractionation between quartz and muscovite, range from 342 °C to 584 °C. The corresponding oxygen isotope composition of the aqueous fluid in equilibrium with these minerals ranges from 1.2 to 5.5 per mil with a mean of 3.9 per mil, suggesting that the liquid had a significant meteoric component. Isochores for aqueous fluid inclusions intersect the modal isotopic isotherm of 425 °C at pressures between 590 and 1900 bar. A model is proposed in which molybdenite was deposited owing to decreasing temperature and/or pressure from CO2-bearing, moderate to high salinity fluids of mixed magmatic-meteoric origin that were in equilibrium with K-feldspar and muscovite. These fluids resulted from the degassing of a monzogranitic magma and evolved through interaction with volcanic (komatiitic) and sedimentary country rocks. Received: 6 February 1997 / Accepted: 28 January 1998  相似文献   

12.
Melt inclusions in olivine and pyroxene phenocrysts in kersantite and camptonite at Chhaktalao in Madhya Pradesh, India are mainly of the evolved type forming daughter minerals of olivine, pyroxene, plagioclase, spinel, mica, titanomagnetite and sulphides. Heating studies exhibit a temperature range from 1215° to 1245°C for the melt inclusions in olivine in camptonite and 1220–1245°C for olivine in kersantite. The temperature for melt inclusions in pyroxene ranged from 1000° to 1150°C in camptonite and 850–1100°C for pyroxene in kersantite. The bubble inside these melt inclusions is mainly CO2. The Th°C of CO2 into liquid phase occurred between 26° and 31°C in olivine and 25–30°C in pyroxene from kersantite and camptonite. The maximum density estimated is 0.72 g/cm3 and the minimum is 0.45 g/cm3. The depth of entrapment of the melt inclusion is estimated between 10–15 km. The pressure of entrapment of melt inclusion in olvine is 4.6 kbar where as that in pyroxene is 3.7 kbar. The lamprophyres in the Chhaktalao area are considered to be derived from low depth and low pressure region, possibly within spinel lherzolite zone.  相似文献   

13.
Gold-bearing quartz veins of the Taihua Group consisting of Archean metavolcanic rocks are a main gold deposit type in the Xiao Qinling area,one of the three biggest gold production areas in China.The quartz veins experienced strong alteration characterized by a typical mesothermal hydrothermal altered mineral assemblage.The grade of gold is affected by the contents of sulphides,e.g.galena,pyrite and chalcopyrite.Results of minor elements analysis for the of gold-bearing quartz veins indicate higher contents of Au and high contents of Ag,Pb,Cu,Cd,W,and Mo.Abundant fluid inclusions were found in the gold-bearing quartz veins.Three types of fluid inclusions were identified:(1) aqueous inclusions;(2) CO 2-bearing inclusions;and(3) daughter crystal-bearing fluid inclusions.Homogenization temperatures ranged from 110 to 670℃ with low and high peaks appearing at 160 180℃ and 280 300℃,respectively.The salinity of aqueous inclusions varies between 1.8 wt% and 38.2 wt% NaCl.The homogenization temperature and salinity show a positive correlation.The H and O isotopes of fluid inclusions in the gold-bearing quartz veins indicate that magmatic solution and metamorphic hydrothermal solution,together with meteoric water,were involved in the formation of gold-bearing fluid.Mesozoic magma activities related to granite intrusions should be the main source of CO 2 fluid with higher temperature and salinity.  相似文献   

14.
The study of re-homogenized melt inclusions in the same growth planes of quartz of pegmatites genetically linked to the Variscan granite of the Ehrenfriedersdorf complex, Erzgebirge, Germany, by ion microprobe analyses has determined high concentrations of Be, up to 10,000 ppm, in one type of melt inclusion, as well as moderate concentrations in the 100 ppm range in a second type of melt inclusion. Generally, the high Be concentrations are associated with the H2O- and other volatile-rich type-B melt inclusions, and the lower Be concentration levels are connected to H2O-poor type-A melt inclusions. Both inclusion types, representing conjugate melt pairs, are formed by a liquid–liquid immiscibility separation process. This extremely strong and very systematic scattering in Be provides insights into the origin of Be concentration and transport mechanisms in pegmatite-forming melts. In this contribution, we present more than 250 new analytical data and show with ion microprobe and fs-LA-ICPMS studies on quenched glasses, as well as with confocal Raman spectroscopy of daughter minerals in unheated melt inclusions, that the concentrations of Be may achieve such extreme levels during melt–melt immiscibility of H2O-, B-, F-, P-, ± Li-enriched pegmatite-forming magmas. Starting from host granite with about 10 ppm Be, melt inclusions with 10,000 ppm Be correspond to enrichment by a factor of over 1,000. This strong enrichment of Be is the result of processes of fractional crystallization and further enrichment in melt patches of pegmatite bodies due to melt–melt immiscibility at fluid saturation. We also draw additional conclusions regarding the speciation of Be in pegmatite-forming melt systems from investigation of the Be-bearing daughter mineral phases in the most H2O-rich melt inclusions. In the case of evolved volatile and H2O-rich pegmatite systems, B, P, and carbonates are important for the enrichment and formation of stable Be complexes.  相似文献   

15.
The Alnö alkaline-carbonatite complex consists in its northernmost part at Laångarsholmen of a ring-type intrusion composed of pyroxenite, sövite and ijolite, emplaced in that order. The intrusion is surrounded by a breccia zone. The petrography, mineral chemistry and fluid/solid inclusion studies suggest that the ring complex and the main intrusion at Alnö have had a somewhat different magmatic evolution, implying different evolution of fluid phases also. At Laångarsholmen, a mafic silicate magma started to crystallize Al-diopside of 0.11 CaTs (Tschermak’s) content during a mid-crustal stage of evolution (ca. 5–6?kbar and 1175°?C). At that stage, the mafic magma was coexisting with a Mg-bearing calcitic melt, recorded in the abundant inclusions, trapped by the crystallizing Al-diopside. The two immiscible melts appear to have separated at ca. 5?kbar and 1150°?C, in good agreement with recent experimental studies. The silicate magma crystallized di+ap+magnetite during its ascent, and was in contact with a saline hydro-carbonic fluid trapped as inclusions in diopside (di) and apatite (ap) (type B2 inclusions reluctant to dissolution up to 550°?C). As PH2O started to increase, Fe-pargasite began to replace the pyroxene. It appears that the fluid present at that stage was aqueous and contained ca. 40%?NaCl. With decreasing PT, the fluid separated into two immiscible phases of high- and low-salinity (type B1 of 65%?NaCl and Cl of 7%?NaCl), respectively. At the shallow depths of the final emplacement, the composition of the fluid phase was most probably controlled by supply of meteoric water as indicated by the dilution trend of some B1 type inclusions. After separation, the carbonatite magma fractionated calcite+ap+dol (as shown by dolomite inclusions in early crystallizing apatite). Around 4?kbar, a CO2-bearing aqueous fluid of low salinity (d=0.85) was coexisting with the melt, and became trapped in the apatite formed during the mid-crustal stage (type A1 fluid inclusions). The residual melt was emplaced into the shallow crust and gave rise to phlogopite-bearing sövite. Fluid inclusions (type A2) trapped in calcite and in recrystallized apatite indicate that the fluid phase evolved towards a late (Na+K) hydro-carbonic fluid during cooling at the shallow depths of the final emplacement. The ijolite does not show signs of liquid immiscibility with the sövite at Laångarsholmen, and exhibits mostly post-magmatic activity of fluid phases.  相似文献   

16.
A set of Palaeozoic diopside–titanite veins are present in Mesoproterozoic metagranites and metasediments that constitute the basement (Mt Painter Inlier) of the Adelaide Fold Belt (South Australia). These massive veins (up to 1 m) of pegmatitic nature contain large crystals of diopside, LREE–Y-enriched titanite (up to 40 cm in length) and minor amounts of quartz. They can be used to trace the system’s development from a high-temperature magmatic stage through to a massive hydrothermal event. The pegmatitic origin of these veins is evident from a complex fluid-melt inclusion assemblage, consisting of a highly saline inhomogeneous fluid and relicts of melt. Immiscibility of melt and heterogeneous highly saline fluids (exceeding 61 eq. mass% NaCl) is preserved in primary inclusions in diopside and secondary inclusions in titanite, indicating relatively shallow conditions of formation (510 ± 20°C and 130 ± 10 MPa). Graphic intergrowth of diopside and albite occurs at the contact with granitic pegmatites. The system evolved into hydrothermal conditions, which can be deduced from a later population of only fluid inclusions (homogeneous and less saline, ≈ 40 eq. mass% NaCl), trapped around 350 ± 20°C and 80 ± 10 MPa. During quartz crystallization, the conditions moved across the halite liquidus resulting in a heterogeneous mixture of brine and halite crystals, which were trapped at 200 ± 20°C and 50 ± 10 MPa. Brecciation and a palaeo-geothermal system overprinted the pegmatitic veins with an epithermal hematite–quartz assemblage and lesser amounts of bladed calcite and fluorite, in an intermittently boiling hydrothermal system of fairly pure H2O at 100–140°C and 1–5 MPa. Remobilization of LREEs and Y from titanite and/or the granitic host rock is evidenced by precipitation of apatite, allanite and wakefieldite in an intermediate stage. Occasional incorporation of radioactive elements or minerals, presumably U-rich, in the fluorite is responsible for radiolysis of H2O to H2.  相似文献   

17.
Fluorine-, boron- and phosphorus-rich pegmatites of the Variscan Ehrenfriedersdorf complex crystallized over a temperature range from about 700 to 500 °C at a pressure of about 1 kbar. Pegmatite quartz crystals continuously trapped two different types of melt inclusions during cooling and growth: a silicate-rich H2O-poor melt and a silicate-poor H2O-rich melt. Both melts were simultaneously trapped on the solvus boundaries of the silicate (+ fluorine + boron + phosphorus) − water system. The partially crystallized melt inclusions were rehomogenized at 1 kbar between 500 and 712 °C in steps of 50 °C by conventional rapid-quench hydrothermal experiments. Glasses of completely rehomogenized inclusions were analyzed for H2O by Raman spectroscopy, and for major and some trace elements by EMP (electron microprobe). Both types of melt inclusions define a solvus boundary in an XH2O–T pseudobinary system. At 500 °C, the silicate-rich melt contains about 2.5 wt% H2O, and the conjugate water-rich melt about 47 wt% H2O. The solvus closes rapidly with increasing temperature. At 650 °C, the water contents are about 10 and 32 wt%, respectively. Complete miscibility is attained at the critical point: 712 °C and 21.5 wt% H2O. Many pegmatites show high concentrations of F, B, and P, this is particularly true for those pegmatites associated with highly evolved peraluminous granites. The presence of these elements dramatically reduces the critical pressure for fluid–melt systems. At shallow intrusion levels, at T ≥ 720 °C, water is infinitely soluble in a F-, B-, and P-rich melt. Simple cooling induces a separation into two coexisting melts, accompanied with strong element fractionation. On the water-rich side of the solvus, very volatile-rich melts are produced that have vastly different physical properties as compared to “normal” silicate melts. The density, viscosity, diffusivity, and mobility of such hyper-aqueous melts under these conditions are more comparable to an aqueous fluid. Received: 15 September 1999 / Accepted: 10 December 1999  相似文献   

18.
The Dongpo tungsten ore deposit, the largest scheelite skarn deposit in China, is located at the contact of a 172-m. y. biotite granite with a Devonian marble. The mineralization associated with the granite includes W, Bi-Mo, Cu-Sn and Pb-Zn ores. Several W mineralization stages are shown by the occurrence of ore in massive skarn deposits and in later cross-cutting veins. The high garnet/pyroxene ratio, the hedenbergite and diopside-rich pyroxene and the andradite-rich garnet show the deposit belongs to the oxidized skarn type. Detailed fluid inclusion studies of granite, greisen, skarn and vein samples reveal three types of fluid inclusion: (1) liquid-rich, (2) gas-rich and (3) inclusions with several daughter minerals. Type (3) is by far the most common in both skarn and vein samples. The dominant daughter mineral in fluid inclusions is rhembic, highly birefringent, and does not dissolve on heating even at 530°C. We assume that this mineral is calcite. The liquid phase in most of the fluid inclusions has low to moderate salinities: 0–15 wt. %; in a few has higher salinities (30–40 wt. % NaCl equivalent). The homogenization temperatures of inclusions in the skarn stage range from 350°C to 530°C, later tungsten mineralization-stage inclusions homogenize between 200°C and 300°C, as do inclusions in veins. Fluid inclusions in granite and greisen resemble those of the late tungsten mineralization stage, with low salinity and homogenization temperatures of 200°–360°C. The tungsten-forming fluids are probably a mixture that came from biotite granite and the surrounding country rocks.  相似文献   

19.
Idiomorphic quartz crystals in topaz-bearing granite from the Salmi batholith contain primary inclusions of silicate melt and abundant mostly secondary aqueous fluid inclusions. Microthermometric measurements on melt inclusions give estimates for the granite solidus and liquidus of 640–680°C and 770–830°C, respectively. Using published solubility models for H2O in granitic melts and the obtained solidus/liquidus temperatures from melt inclusions, the initial water concentration of the magma is deduced to have been approximately 3 wt.% and the minimum pressure about 2 kbar. At this initial stage, volatile-undersaturation conditions of magma were assumed. These results indicate that the idiomorphic quartz crystals are magmatic in origin and thus real phenocrysts. During subsolidus cooling and fracturing of the granite, several generations of aqueous fluid inclusions were trapped into the quartz phenocrysts. The H2O inclusions have salinities and densities of 1–41 wt.% NaCl eq. and 0.53–1.18 g/cm3, respectively.  相似文献   

20.
Hydrothermal alteration and mineralization at the Wunugetu porphyry Cu–Mo deposit, China, include four stages, i.e., the early stage characterized by quartz, K-feldspar and minor mineralization, followed by a molybdenum mineralization stage associated with potassic alteration, copper mineralization associated with sericitization, and the last Pb–Zn mineralization stage associated with carbonation. Hydrothermal quartz contains three types of fluid inclusions, namely aqueous (W-type), daughter mineral-bearing (S-type) and CO2-rich (C-type) inclusion, with the latter two types absent in the late stage. Fluid inclusions in the early stage display homogenization temperatures above 510°C, with salinities up to 75.8 wt.% NaCl equivalent. The presence of S-type inclusions containing anhydrite and hematite daughter minerals and C-type inclusions indicates an oxidizing, CO2-bearing environment. Fluid inclusions in the Mo- and Cu-mineralization stages yield homogenization temperatures of 342–508°C and 241–336°C, and salinities of 8.6–49.4 and 6.3–35.7 wt.% NaCl equivalent, respectively. The presence of chalcopyrite instead of hematite and anhydrite daughter minerals in S-type inclusions indicates a decreasing of oxygen fugacity. In the late stage, fluid inclusions yield homogenization temperatures of 115–234°C and salinities lower than 12.4 wt.% NaCl equivalent. It is concluded that the early stage fluids were CO2 bearing, magmatic in origin, and characterized by high temperature, high salinity, and high oxygen fugacity. Phase separation occurred during the Mo- and Cu-mineralization stages, resulting in CO2 release, oxygen fugacity decrease and rapid precipitation of sulfides. The late-stage fluids were meteoric in origin and characterized by low temperature, low salinity, and CO2 poor.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号