首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 375 毫秒
1.
Recently released seismic reflection data, together with previous seismic and well data, are used to describe the development of the Dannemarie basin, in the SW end of the Upper Rhine Graben. The Dannemarie Basin was formed during the main rifting phase of the Upper Rhine Graben as an asymmetrical graben trending NE–SW. Post-rift tectonism shifted the depocenter southward and changed the overall shape of the basin. Miocene Jura compression did not result in the formation of folds, as in the adjacent Mulhouse Horst. Strike slip faulting was dominant in the post-rift period and new faults were created, most notably the north trending and transpressional Belfort Fault. The boundary of the Dannemarie Basin with the Vosges Mountains is part of a restraining bend, which may account for the uplift of the southernmost part of the Vosges Mountains.  相似文献   

2.
  相似文献   

3.
  相似文献   

4.
The changing palaeogeographical pattern of Alpine deposits across the European forelands can be traced by identifying mineral assemblages and establishing the chronology of Pliocene-Pleistocene deposits in Alpine foreland. In the late Miocene, the upper courses of the Rhine and the Aar flowed east from the Swiss molasse plain towards the Danube. In the early Pliocene (Brunssumian, 5-3.2 Ma), these same rivers headed north wards towards the Rhine Graben of Alsace. In the early Reuverian, these streams were captured south of the Rhine Graben by the Doubs. They ceased their northward flow and headed west to feed the Bresse Graben. This phase is dated to the Lower and Middle Reuverian (3.2-2.6 Ma). From the Upper Reuverian (2.6 Ma) to the present day, the Rhine has adapted approximately its present course towards the North Sea, south to north along the Rhine Graben and across the Rhine Schist Massif to feed the Dutch Grabens. This changing pattern of capture and alteration of the hydrographic system of the upper reaches of the Rhine and the Aar can be explained by local tectonic movements.  相似文献   

5.
The development of the Alpine mountain belt has been governed by the convergence of the African and European plates since the Late Cretaceous. During the Cenozoic, this orogeny was accompanied with two major kinds of intraplate deformation in the NW-European foreland: (1) the European Cenozoic Rift System (ECRIS), a left-lateral transtensional wrench zone striking NNE-SSW between the western Mediterranean Sea and the Bohemian Massif; (2) long-wavelength lithospheric folds striking NE and located between the Alpine front and the North Sea. The present-day geometry of the European crust comprises the signatures of these two events superimposed on all preceding ones. In order to better define the processes and causes of each event, we identify and separate their respective geometrical signatures on depth maps of the pre-Mesozoic basement and of the Moho. We derive the respective timing of rifting and folding from sedimentary accumulation curves computed for selected locations of the Upper Rhine Graben. From this geometrical and chronological separation, we infer that the ECRIS developed mostly from 37 to 17 Ma, in response to north-directed impingement of Adria into the European plate. Lithospheric folds developed between 17 and 0 Ma, after the azimuth of relative displacement between Adria and Europe turned counter-clockwise to NW–SE. The geometry of these folds (wavelength = 270 km; amplitude = 1,500 m) is consistent with the geometry, as predicted by analogue and numerical models, of buckle folds produced by horizontal shortening of the whole lithosphere. The development of the folds resulted in ca. 1,000 m of rock uplift along the hinge lines of the anticlines (Burgundy–Swabian Jura and Normandy–Vogelsberg) and ca. 500 m of rock subsidence along the hinge line of the intervening syncline (Sologne–Franconian Basin). The grabens of the ECRIS were tilted by the development of the folds, and their rift-related sedimentary infill was reduced on anticlines, while sedimentary accumulation was enhanced in synclines. We interpret the occurrence of Miocene volcanic activity and of topographic highs, and the basement and Moho configurations in the Vosges–Black Forest area and in the Rhenish Massif as interference patterns between linear lithospheric anticlines and linear grabens, rather than as signatures of asthenospheric plumes.
O. BourgeoisEmail:
  相似文献   

6.
Processing of gravity and magnetic maps shows that the basement of the Upper Rhine Graben area is characterized by a series of NE–SW trending discontinuities and elongated structures, identified in outcrops in the Vosges, Black Forest, and the Odenwald Mountains. They form a 40 km wide, N30–40° striking, sinistral wrench-zone that, in the Visean, shifted the Variscan and pre-Variscan structures by at least 43 km to the NE. Wrenching was associated with emplacement of several generations of plutonic bodies emplaced in the time range 340–325 Ma. The sub-vertical, NE–SW trending discontinuities in the basement acted as zones of weakness, susceptible to reactivation by subsequent tectonism. The first reactivation, marked by mineralizations and palaeomagnetic overprinting along NE–SW faults of the Vosges Mountains, results from the Liassic NW–SE extension contemporaneous with the break-up of Pangea. The major reactivation occurred during the Late Eocene N–S compression and the Early-Middle Oligocene E–W extension. The NE–SW striking basement discontinuities were successively reactivated as sinistral strike-slip faults, and as oblique normal faults. Elongated depocenters appear to form in association with reactivated Variscan wrench faults. Some of the recent earthquakes are located on NE–SW striking Variscan fault zones, and show sinistral strike-slip focal mechanisms with the same direction, suggesting also present reactivation.  相似文献   

7.
The Upper Rhine Graben (URG) is the most perceptible part of the European Cenozoic Rift System. Uplifted Variscan basement of the Black Forest and the Vosges forms the flanks of the southern part of the graben. Apatite and zircon fission-track (FT) analyses indicate a complex low-temperature thermal history of the basement that was deciphered by inverse modelling of FT parameters. The models were tested against the observed data and independent geological constraints. The zircon FT ages of 28 outcrop samples taken along an E–W trending transect across the Black Forest and the Vosges range from 136 to 312 Ma, the apatite FT ages from 20 to 83 Ma. The frequency distributions of confined track lengths are broad and often bimodal in shape indicating a complex thermal history. Cooling below 120°C in the Early Cretaceous to Palaeogene was followed by a discrete heating episode during the late Eocene and subsequent cooling to surface temperature. The modelled time–temperature (t–T) paths point to a total denudation of the flanks of URG in the range of 1.0–1.7 km for a paleogeothermal gradient of 60°C/km, and 1.3–2.2 km for a paleogeothermal gradient of 45°C/km since the late Eocene.  相似文献   

8.
  相似文献   

9.
The Rwenzori Mountains (Mtns) in west Uganda are the highest rift mountains on Earth and rise to more than 5,000 m. We apply low-temperature thermochronology (apatite fission-track (AFT) and apatite (U–Th–Sm)/He (AHe) analysis) for tracking the cooling history of the Rwenzori Mtns. Samples from the central and northern Rwenzoris reveal AFT ages between 195.0 (±8.4) Ma and 85.3 (±5.3) Ma, and AHe ages between 210.0 (±6.0) Ma to 24.9 (±0.5) Ma. Modelled time–temperature paths reflect a protracted cooling history with accelerated cooling in Permo-Triassic and Jurassic times, followed by a long period of constant and slow cooling, than succeeded by a renewed accelerated cooling in the Neogene. During the last 10 Ma, differentiated erosion and surface uplift affected the Rwenzori Mtns, with more pronounced uplift along the western flank. The final rock uplift of the Rwenzori Mtns that partly led to the formation of the recent topography must have been fast and in the near past (Pliocene to Pleistocene). Erosion could not compensate for the latest rock uplift, resulting in Oligocene to Miocene AHe ages.  相似文献   

10.
In order to add new data to the knowledge of the paleogeography of Southern Tuscany and the Tuscan shelf, a multidisciplinary study on the petrology and distribution of magmatic clasts of the widely exposed Messinian, Pliocene, and Quaternary sediments in Southern Tuscany was carried out. The magmatic clasts consist of porphyric aplites and subordinate granite porphyries, which derive from eroded subvolcanic acidic bodies. The porphyric aplite clasts were analyzed in detail to define their textural, petrographic, and chemical (major and trace elements, Sr and Nd isotopic composition) features. The porphyric aplite clasts show strong affinities with the 8.4–7.9 Ma old Capo Bianco aplite, whereas the granite porphyry clasts have affinities with the Portoferraio porphyry (ca. 8 Ma) which intruded the Cretaceous and Paleogene Flysch Units and the Ophiolitic Unit in central-western Elba Island (Northern Tyrrhenian Sea). The present outcrops of the Capo Bianco aplite in central Elba Island cannot be considered as the source rock for the Late Messinian gravels, because at that time such Capo Bianco aplite (located at the lower portion of the laccolitic stack) was there buried at several kilometers depth. However, other Capo Bianco-like aplitic bodies outcropped during the latest Miocene in the host rocks above and also around the 6.8 Ma M. Capanne Pluton in the western Elba areas. The exposure of such bodies was made possible by the activation of the central Elba detachment fault (=CEF), due to the uplift of the M. Capanne pluton. This uplift displaced a significant portion of the cover (including the upper portion of the laccolithic stack) of the granitoid body at about 6, 7 Ma, thus allowing the erosion of the lower part of the laccolith complex made up of the Capo Bianco aplite and of the Portoferraio porphyry and leaving still buried the M. Capanne pluton. The paleogeographic picture of Southern Tuscany arising from the collected evidences is the following: during Late Messinian, the clasts were dispersed by a SSW/NNE-trending complex fluvial system in the Colline Metallifere area. The Early Pliocene extensional tectonics cut off the detrital inputs from the Messinian source areas, because of the onset of the Piombino Channel and of the Campiglia–Gavorrano Ridge. During the Pliocene, the clasts were cannibalized from the previous sedimentary units and reached the easternmost areas due the eastward progressive uplift of the Colline Metallifere, likely connected with the coeval magmatic intrusions. Finally, the Quaternary regional uplift allowed a drainage reversal and a backward displacement of the aplitic clasts toward the Tyrrhenian coast. These data point to a rapidly evolving drainage pattern in Southern Tuscany during the considered time interval, which was mostly driven by the intrusion and uplift of the Messinian to Quaternary plutons. The morpho-tectonic evolution is well framed also within the models since long accepted for the Northern Apennine geodynamics, characterized by an overall eastward shift of the orogenic front.  相似文献   

11.
During the Pleistocene, the Rhine glacier system acted as a major south–north erosion and transport medium from the Swiss Alps into the Upper Rhine Graben, which has been the main sediment sink forming low angle debris fans. Only some aggradation resulted in the formation of terraces. Optically stimulated luminescence (OSL) and radiocarbon dating have been applied to set up a more reliable chronological frame of Late Pleistocene and Holocene fluvial activity in the western Hochrhein Valley and in the southern part of the Upper Rhine Graben. The stratigraphically oldest deposits exposed, a braided-river facies, yielded OSL age estimates ranging from 59.6 ± 6.2 to 33.1 ± 3.0 ka. The data set does not enable to distinguish between a linear age increase triggered by a continuous autocyclical aggradation or two (or more) age clusters, for example around 35 ka and around 55 ka, triggered by climate change, including stadial and interstadial periods (sensu Dansgaard–Oeschger cycles). The braided river facies is discontinuously (hiatus) covered by coarse-grained gravel-rich sediments deposited most likely during a single event or short-time period of major melt water discharge postdating the Last Glacial Maximum. OSL age estimates of fluvial and aeolian sediments from the above coarse-grained sediment layer are between 16.4 ± 0.8 and 10.6 ± 0.5 ka, and make a correlation with the Late Glacial period very likely. The youngest fluvial aggradation period correlates to the beginning of the Little Ice Age, as confirmed by OSL and radiocarbon ages.  相似文献   

12.
Major and trace element and isotopic ratios (Sr, Nd and Pb) are presented for mafic lavas (MgO > 4 wt%) from the southwestern Yabello region (southern Ethiopia) in the vicinity of the East African Rift System (EARS). New K/Ar dating results confirm three magmatic periods of activity in the region: (1) Miocene (12.3–10.5 Ma) alkali basalts and hawaiites, (2) Pliocene (4.7–3.6 Ma) tholeiitic basalts, and (3) Recent (1.9–0.3 Ma) basanite-dominant alkaline lavas. Trace element and isotopic characteristics of the Miocene and Quaternary lavas bear a close similarity to ocean island basalts that derived from HIMU-type sublithospheric source. The Pliocene basalts have higher Ba/Nb, La/Nb, Zr/Nb and 87Sr/86Sr (0.70395–0.70417) and less radiogenic Pb isotopic ratios (206Pb/204Pb = 18.12–18.27) relative to the Miocene and Quaternary lavas, indicative of significant contribution from enriched subcontinental lithospheric mantle in their sources. Intermittent upwelling of hot mantle plume in at least two cycles can explain the magmatic evolution in the southern Ethiopian region. Although plumes have been originated from a common and deeper superplume extending from the core–mantle boundary, the diversity of plume components during the Miocene and Quaternary reflects heterogeneity of secondary plumes at shallower levels connected to the African superplume, which have evolved to more homogeneous source.  相似文献   

13.
The thermal history of the south-westernmost Black Forest (Germany) and the adjacent Upper Rhine Graben were constrained by a combination of apatite and zircon fission-track (FT) and microstructural analyses. After intrusion of Palaeozoic granitic plutons in the Black Forest, the thermal regime of the studied area re-equilibrated during the Late Permian and the Mesozoic, interrupted by enhanced hydrothermal activity during the Jurassic. At the eastern flank of the Upper Rhine Graben along the Main Border Fault the analysed samples show microstructural characteristics related to repeated tectonic and hydrothermal activities. The integration of microstructural observations of the cataclastic fault gouge with the FT data identifies the existence of repeated tectonic-related fluid flow events characterised by different thermal conditions. The older took place during the Variscan and/or Mesozoic time at temperatures lower than 280°C, whereas the younger was probably contemporary with the Cenozoic rifting of the Upper Rhine Graben at temperatures not higher than 150°C.  相似文献   

14.
A 3D geological model of the area east of Basel on the southeastern border of the Upper Rhine Graben, consisting of 47 faults and six stratigraphic horizons relevant for groundwater flow, was developed using borehole data, geological maps, geological cross sections, and outcrop data. This model provides new insight into the discussions about the kinematics of the area between the southeastern border of the Upper Rhine Graben and the Tabular Jura east of Basel. A 3D analysis showed that both thin-skinned and thick-skinned tectonic elements occur in the modeled area and that the Anticline and a series of narrow graben structures developed simultaneously during an extensional stress-field varying from E–W to SSE–NNW, which lasted from the Middle Eocene to Late Oligocene. In a new approach the faults and horizons of the 3D geological model were transferred into discrete elements with distributed hydrogeological properties in order to simulate the 3D groundwater flow regime within the modeled aquifers. A three-layer approach with a horizontal regularly spaced grid combined with an irregular property distribution of transmissivity in depth permitted the piezometric head of the steady-state model to be automatically calibrated to corresponding measurements using more than 200 piezometers. Groundwater modeling results demonstrated that large-scale industrial pumping affected the groundwater flow field in the Upper Muschelkalk aquifer at distances of up to 2 km to the south. The results of this research will act as the basis for further model developments, including salt dissolution and solute transport in the area, and may ultimately help to provide predictions for widespread land subsidence risks.  相似文献   

15.
The Katanga province, Democratic Republic of Congo, hosts world-class cobalt deposits accounting for ~50% of the world reserves. They originated from sediment-hosted stratiform copper and cobalt sulfide deposits within Neoproterozoic metasedimentary rocks. Heterogenite, the main oxidized cobalt mineral, is concentrated as “cobalt caps” along the top of silicified dolomite inselbergs. The supergene cobalt enrichment process is part of a regional process of residual ore formation that also forms world-class “manganese cap” deposits in western Katanga, i.e., the “black earths” that are exploited by both industrial and artisanal mining. Here, we provide constraints on the genesis and the timing of these deposits. Ar–Ar analyses of oxidized Mn ore and in situ U–Pb SIMS measurements of heterogenite yield Mio–Pliocene ages. The Ar–Ar ages suggest a multi-phase process, starting in the Late Miocene (10–5 Ma), when the metal-rich substratum was exposed to the action of meteoric fluids, due to major regional uplift. Further oxidation took place in the Pliocene (3.7–2.3 Ma) and formed most of the observed deposits under humid conditions: Co- and Mn-caps on metal-rich substrata, and coeval Fe laterites on barren areas. These deposits formed prior to the regional shift toward more arid conditions in Central Africa. Arid conditions still prevailed during the Quaternary and resulted in erosion and valley incision, which dismantled the metal-bearing caps and led to ore accumulation in valleys and along foot slopes.  相似文献   

16.
Re-evaluation of the river history, palaeosurface levels and exhumation history in northern Switzerland for the last 10 million years reveals that distinct morphotectonic events about 4.2 and 2.8 million years ago (Ma) caused major reorganisation of river networks and morphosculpture. As a result of the earlier formation of the Swiss Jura, potential relief energy in the piggy-back North Alpine Foreland Basin (NAFB) of northern central Switzerland south of the Jura fold belt was built up after 11–10 Ma. It was suddenly released by river capture at about 4.2 Ma when the Aare-Danube was captured by a tributary of the Rhône-Doubs river system which rooted southeast of the Black forest. This event triggered rapid denudation of weakly consolidated Molasse sediments, in the order of about 1 km, as constrained by apatite fission track data from drillholes in the NAFB. Likely mechanisms of river capture are (a) headward erosion of Rhône-Doubs tributaries, (b) uplift and rapidly increasing erosion of the Swiss Alps after about 5.3 Ma, and (c) gravel aggradation at the eastern termination of the Jura fold belt in the course of eastward and northward tilt of the piggy-back NAFB. A morphotectonic event between 4.2 and 2.5 Ma, probably at about 2.8 Ma, caused a phase of planation, accompanied by local gravel aggradation and temporary storage of Alpine debris. Between 2.8 and 2.5 Ma, the Aare-Rhône river system is cannibalised by the modern Rhine River, the latter later connecting with the Alpine Rhine River.  相似文献   

17.
An isotope-geochronological study has been performed to examine the products of Late Cenozoic collision volcanism on the northern coast of Van Lake, Turkey. We obtained 45 new K-Ar dates, based on which the principal time characteristics of volcanic activity in the region have been determined. The total duration of magmatic activity in the area of the northern coast of Van Lake has lasted ∼15 myr; it has had an expressed discrete nature, when periods of intense volcanic activity alternated with lasting breaks in eruptions. Four stages of Neogene-Quaternary volcanism have been identified: Middle Miocene (15.0–13.5 myr), Late Miocene (10–9 myr), Pliocene (5.8–3.7 myr), and Quaternary (1.0–0.4 Ma). The average duration of the stages has been 1–2 myr; the stages were separated from each other with periods of inactivity of approximately equal lengths (∼3 myr). For each of the Pliocene and Quaternary stages, three additional phases of volcanism have been identified, which were separated from each other with short time intervals (a few hundred thousand years). The last burst of volcanic activity in the area in question took place ∼400 ka; similar to Quaternary volcanism in general, it was not characterized by a high intensity. An important result of the studies performed was to confirm the existence of a separate Middle Miocene stage of collision volcanism for the Caucasian-Anatolian Segment of the Alpine Fold Belt. The data generated allow concluding that Neogene-Quaternary volcanism in this portion of the belt started much earlier (∼15 Ma) than assumed by the majority of the previous researchers.  相似文献   

18.
 The combined information about the stratigraphies from the foreland basins surrounding the Swiss Alps, exhumation mechanisms and the structural evolution of the Alpine orogenic wedge allow an evaluation of the controls of erosion rates on large-scale Alpine tectonic evolution. Volumetric data from the Molasse Basin and fining-upward trends in the Gonfolite Lombarda indicate that at ∼20 Ma, average erosion rates in the Alps decreased by >50%. It appears that at that time, erosion rates decreased more rapidly than crustal uplift rates. As a result, surface uplift occurred. Because of surface uplift, the drainage pattern of the Alpine hinterland evolved from an across-strike to the present-day along-strike orientation. Furthermore, the decrease of average erosion rates at ∼20 Ma coincides with initiation of a phase of thrusting in the Jura Mountains and the Southern Alpine nappes at ∼50 km distance from the pre-20-Ma thrust front. Coupled erosion-mechanical models of orogens suggest that although rates of crustal convergence decreased between the Oligocene and the present, the reduction of average erosion rates at ∼20 Ma was high enough to have significantly influenced initiation of the state of growth of the Swiss Alps at that time. Received: 8 June 1998 / Accepted: 30 October 1998  相似文献   

19.
The southern end of the Upper Rhine Graben is one of the zones in Switzerland where recent crustal movements can be expected because of ongoing seismotectonic processes as witnessed by seismicity clusters occurring in this region. Therefore, in 1973 a control network with levelling profiles across the eastern Rhine Graben fault was installed and measured in the vicinity of the city of Basel in order to measure relative vertical movements and investigate their relationship with seismic events. As a contribution to EUCOR-URGENT, the profiles were observed a third time in the years 2002 and 2003 and connected to the Swiss national levelling network. The results of these local measurements are discussed in terms of accuracy and significance. Furthermore, they are combined and interpreted together with the extensive data set of recent vertical movements in Switzerland (Jura Mountains, Central Plateau and the Alps). In order to be able to prove height changes with precise levelling, their values should amount to at least 3–4 mm (1). The present investigations, however, have not shown any significant vertical movements over the past 30 years.  相似文献   

20.
In the northern part of the Upper Rhine Graben (URG), a high-resolution seismic reflection survey was carried out on the Rhine River over a length of 80 km, and on its tributary Neckar over a length of 25 km. The seismic investigation provides new results to redefine the base of Quaternary fluvial sediments from Oppenheim upstream to the south of Mannheim. The standard Quaternary thickness map of Bartz (1974) was partially revised and completed. Maximum Pleistocene sediment thickness is documented in the area of Mannheim with approximately 225 m. The top of the Pliocene in this area is sub-horizontal and not faulted, and rises downstream continuously towards the fault block of Worms. Intercalated lacustrine pelitic layers play a main role in defining the litho-stratigraphy in this part of the URG. In the north of Worms, Pleistocene sediments are mainly coarse-grained. In the area of Worms, a Pleistocene tectonic phase along N–S striking normal faults with variable displacement along the strike is obvious.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号