共查询到18条相似文献，搜索用时 687 毫秒
1.
剪切型结构的抗震强度折减系数研究 总被引：1，自引：0，他引：1
为了研究剪切型结构抗震强度需求的变化规律,本文基于单自由度体系的非线性时程分析,研究了不同场地条件下延性折减系数与位移延性系数和结构自振周期的关系;采用修正等效单自由度体系位移延性折减系数的方法,研究了剪切型多自由度体系的延性折减系数;以基于中国建筑抗震规范设计的代表不同抗震能力要求的RC框架结构为分析对象,通过静力弹塑性分析,研究了RC框架结构的体系超强能力。分析结果表明场地类别、位移延性水准和结构振动周期对单自由度体系的延性折减系数有显著的影响;多自由度体系的抗震延性折减系数明显比其相应的等效单自由度体系的抗震延性折减系数小;RC框架结构的超强系数一般随结构楼层数的增加而减小,随抗震设防烈度的增大而减小,内框架的超强系数比边框架的超强系数大。 相似文献
2.
考虑场地类别与设计分组的延性需求谱和弹塑性位移反应谱 总被引：46，自引：13，他引：33
非线性反应谱是基于性能的抗震设计理论中亟待解决的基础性课题之一。本文将四种场地类别上的641条地震记录,按我国现行抗震规范设计分组的要求分为12组,对大量具有不同屈服强度系数的单自由度体系作了弹塑性时程分析。研究了结构强度水平、周期、场地类别以及设计分组等因素对延性需求的影响。结果表明,在给定屈服强度水平下结构的延性需求强烈地依赖于场地条件、设计分组等因素。对于短周期结构,延性需求随场地土变软而增大,同类场地随设计分组特征周期增大而增大。通过非线性回归分析,建立了与场地类别、设计分组相对应的延性需求谱μ-ξy-T的计算公式。在此公式的基础上,结合现阶段抗震设计规范构建了弹塑性位移反应谱,可用于结构弹塑性位移需求的简化计算,同时讨论了弹塑性位移反应谱的基本特点。 相似文献
3.
建筑结构基于性能的抗震评估的等ζy延性谱法 总被引：1，自引：0，他引：1
利用水平地震作用下单自由度体系的运动方程,以屈服承载力系数ζy为参量,推导出适时延性系数动力方程,从而建立了基于屈服承载力系数的延性需求谱。结合结构的非线性静力pushover分析,提出了基于性能的抗震评估方法——等ζy延性谱法。用等yζ延性谱法对一个6层钢筋混凝土框架结构进行了抗震评估,并与非线性时程分析进行了比较。结果表明,用等yζ延性谱法对结构进行抗震性能评估是可行的,并且具有较高的精度。 相似文献
4.
带加强层高层、超高层建筑结构目益增多,针对此类结构提出合理的抗震设计方法十分必要.根据模态理论考虑高阶振型对结构反应的贡献,基于较成熟的多层结构直接基于位移的抗震设计理论,提出了带加强层高层建筑结构直接基于位移的抗震设计方法.方法根据模态理论将结构各个振型分别等效为单自由度体系,计算各单自由度体系的地震响应,进而以振型... 相似文献
5.
弹塑性地震反应谱的长周期特性研究 总被引：3，自引：1，他引：3
在基于性能抗震设计中弹塑性反应谱在计算结构地震位移反应方面越来越受到重视。利用统计分析方法研究了等强度的延性需求谱和等延性的强度折减系数谱的长周期(至5 s)区段的特性,关注的重点是等位移准则和场地条件影响。给出了若干具有工程价值的结论:一是周期介于1.5Tg(地震动特征周期)和2.5 s之间的结构可近似认为等位移准则成立且与场地条件关系不大,这样确定的强度折减系数当位移延性系数小于等于4时结果将是偏于安全的;二是结构周期大于2.5 s后以硬土场地等延性强度折减系数谱或等强度延性需求谱代替软土场地谱求解系统强度需求或延性需求,将会得到偏于安全的结果。 相似文献
6.
钢框架结构直接基于位移抗震性能设计的非迭代法 总被引：1，自引：1，他引：0
为使直接基于位移的抗震性能设计方法更加简便准确,本文采用一种直接基于位移的非迭代抗震设计方法对钢框架结构进行设计。该方法首先考虑结构的非弹性反应确定等效弹性反应谱和弹塑性反应谱,并建立了使用Newmark-Hall变形折减系数的能力谱的明确表达式。采用能力-需求图方法,确定了结构需要的目标位移与延性、谱位移和谱加速度之间关系的明确表示式,得到结构的刚度和设计基底剪力,进而确定构件截面,完成结构设计。对五层两跨平面钢框架结构进行了直接基于位移的抗震性能设计,设计过程简便,无需迭代程序,不需画出反应谱,通过时程分析验证了设计结果的精确性。本文研究表明:直接基于位移的非迭代抗震设计方法是一种简便、高效、精确的抗震性能设计方法。 相似文献
7.
能力谱方法在桥梁抗震性能评估中的应用研究 总被引：1，自引：0，他引：1
位移延性是桥梁抗震性能的重要指标之一,以Pushover分析为基础的能力谱方法能够考察结构在地震下的弹塑性位移响应,是抗震性能评估的一种有效手段.文中阐述了能力谱法的基本原理,说明了基于弹塑性反应谱的能力谱方法在求解性能点时不需要进行迭代计算;基于弹性设计反应谱建立了相对应的弹塑性反应谱,结合某实桥,将能力谱方法和增量动力分析方法进行了对比,并根据不同的地震基本烈度和场地土类型进行了抗震性能评估.分析认为,能力谱方法计算简便,对结构1阶振型的地震响应占主导时,具有较好的精度,并能够基于设计反应谱来考察结构的弹塑性抗震性能,可用于桥梁抗震性能的评估. 相似文献
8.
《地震工程与工程振动》2021,41(4)
结构震后残余位移是抗震性能评估和地震损失评估的重要参数。文中针对理想弹塑性单自由度体系,采用与残余位移相关性最好的归一化参数定义残余位移比,通过动力时程分析建立统计平均的等延性残余位移比谱和等强度残余位移比谱,研究场地条件、延性系数及强度折减系数对等延性残余位移比谱和等强度残余位移比谱的影响,通过回归分析构建了等延性残余位移比谱和等强度残余位移比谱的预测方程。结果表明:残余位移与弹塑性谱位移的相关性较大,与弹性谱位移的相关性较小;软土场地下结构残余位移的评估需考虑场地条件的影响;残余位移比离散性受延性系数和强度折减系数影响显著。 相似文献
9.
《地震工程与工程振动》2016,(4)
基于性态的结构抗震设计中的强度折减系数是确定结构非弹性反应谱的重要依据。本文研究主余震序列型地震作用下单自由度体系考虑损伤的强度折减系数谱。首先收集主余震实测记录并按中国抗震规范要求进行场地类别划分,对余震峰值进行调幅后进行单自由度结构弹塑性动力时程分析,研究了结构周期、延性系数、损伤指数、余震作用等因素对强度折减系数需求的影响。结果表明余震对强度折减系数的影响显著,考虑累积损伤的强度折减系数(R_D)是基于位移延性的强度折减系数(R_μ)的0.6至0.9倍。最后,经过统计平均和回归分析,建立了平均强度折减系数谱的简化公式。 相似文献
10.
工程结构等延性地震抗力谱研究 总被引：28，自引：7，他引：21
研究结构的非弹性反应谱对改进现有的结构抗震设计、发展基于性态的抗震设计以及了解复杂地面运动特性与结构动力特性之间的关系具有重要的意义。利用大量的单自由度在强震记录作用下的弹塑性动力时程分析,对等延性地震抗力谱这一重要的非弹性反应谱进行了较为详尽的研究,给出了四类场地条件(基岩、硬土、一般土和软土)下的平均等延性地震抗力谱,总结了对工程结构的抗震设计和研究具有实际意义的规律和特征,并分析了场地条件、结构的延性系数以及周期等对等延性地震抗力谱的影响,提出了新的拟合公式,其成果可供抗震研究和设计直接应用。 相似文献
11.
Non-linear seismic behavior of structures with limited hysteretic energy dissipation capacity 总被引：1，自引：0，他引：1
Pierino Lestuzzi Youssef Belmouden Martin Trueb 《Bulletin of Earthquake Engineering》2007,5(4):549-569
This paper investigates the non-linear seismic behavior of structures such as slender unreinforced masonry shear walls or
precast post-tensioned reinforced concrete elements, which have little hysteretic energy dissipation capacity. Even if this
type of seismic response may be associated with significant deformation capacity, it is usually not considered as an efficient
mechanism to withstand strong earthquakes. The objective of the investigations is to propose values of strength reduction
factors for seismic analysis of such structures. The first part of the study is focused on non-linear single-degree-of-freedom
(SDOF) systems. A parametric study is performed by computing the displacement ductility demand of non-linear SDOF systems
for a set of 164 recorded ground motions selected from the European Strong Motion Database. The parameters investigated are
the natural frequency, the strength reduction factor, the post-yield stiffness ratio, the hysteretic energy dissipation capacity
and the hysteretic behavior model (four different hysteretic models: bilinear self-centring, with limited or without energy
dissipation capacity, modified Takeda and Elastoplastic). Results confirm that the natural frequency has little influence
on the displacement ductility demand if it is below a frequency limit and vice versa. The frequency limit is found to be around
2 Hz for all hysteretic models. Moreover, they show that the other parameters, especially the hysteretic behavior model, have
little influence on the displacement ductility demand. New relationships between the displacement ductility demand and the
strength reduction factor for structures having little hysteretic energy dissipation capacity are proposed. These relationships
are an improvement of the equal displacement rule for the considered hysteretic models. In the second part of the investigation,
the parametric study is extended to multi-degree-of-freedom (MDOF) systems. The investigation shows that the results obtained
for SDOF systems are also valid for MDOF systems. However, the SDOF system overestimates the displacement ductility demand
in comparison to the corresponding MDOF system by approximately 15%. 相似文献
12.
Ground-Motion Prediction Equations (GMPEs) for inelastic displacement and ductility demands of constant-strength SDOF systems 总被引：1，自引：1，他引：0
The objective of this paper is to present ground-motion prediction equations for ductility demand and inelastic spectral displacement
of constant-strength perfectly elasto-plastic single-degree-of-freedom (SDOF) oscillators. Empirical equations have been developed
to compute the ductility demand as a function of two earthquake parameters; moment magnitude, and source-to-site distance;
one site parameter, the ground type; and three oscillator parameters, an undamped natural period, critical damping ratio,
and the mass-normalized yield strength. In addition, a comparative study of the proposed model with selected previous studies
and recommendations of Eurocode 8 is presented. Proposed equations can easily be incorporated in existing probabilistic seismic
hazard analysis (PSHA) software packages with the introduction of an additional parameter. This leads to hazard curves for
inelastic spectral displacement, which can provide better estimates of target displacement for nonlinear static procedures
and an efficient intensity measure for probabilistic seismic demand analysis (PSDA). Proposed equations will be useful in
performance evaluation of existing structures. 相似文献
13.
Phaiboon Panyakapo 《地震工程与结构动力学》2004,33(12):1211-1231
An investigation on the validity of the conventional design approach known as constant displacement ductility is carried out. The hysteretic behaviour described by the Modified Takeda model is taken to represent the characteristics of reinforced concrete structural systems. The results presented in the form of seismic damage spectra indicate that the conventional design approach may not be valid because cumulative damage is excessively high. The inelastic design spectra based on the constant‐damage concept are proposed in terms of simplified expressions. The expressions are derived from constant‐damage design spectra computed by non‐linear response analysis for SDOF systems subjected to ground motions recorded on rock sites, alluvium deposits, and soft‐soil sites. The proposed expressions, which are dependent on the local soil conditions, are functions of target seismic damage, displacement ductility ratio and period of vibration. The seismic damage of structures that have been designed based on this new design approach is also checked by a design‐and‐evaluation approach. The results are found to be satisfactory. Copyright © 2004 John Wiley & Sons, Ltd. 相似文献
14.
The determination of displacement demands for masonry buildings subjected to seismic action is a key issue in the performance-based assessment and design of such structures. A technique for the definition of single-degree-of-freedom (SDOF) nonlinear systems that approximates the global behaviour of multi-degree-of-freedom (MDOF) 3D structural models has been developed in order to provide useful information on the dependency of displacement demand on different seismic intensity measures. The definition of SDOF system properties is based on the dynamic equivalence of the elastic properties (vibration period and viscous damping) and on the comparability with nonlinear hysteretic behaviour obtained by cyclic pushover analysis on MDOF models. The MDOF systems are based on a nonlinear macroelement model that is able to reproduce the in-plane shear and flexural cyclic behaviour of pier and spandrel elements. For the complete MDOF models an equivalent frame modelling technique was used. The equivalent SDOF system was modelled using a suitable nonlinear spring comprised of two macroelements in parallel. This allows for a simple calibration of the hysteretic response of the SDOF by suitably proportioning the contributions of flexure-dominated and shear-dominated responses. The comparison of results in terms of maximum displacements obtained for the SDOF and MDOF systems demonstrates the feasibility and reliability of the proposed approach. The comparisons between MDOF and equivalent SDOF systems, carried out for several building prototypes, were based on the results of time-history analyses performed with a large database of natural records covering a wide range of magnitude, distance and local soil conditions. The use of unscaled natural accelerograms allowed the displacement demand to be expressed as a function of different ground motion parameters allowing for the study of their relative influence on the displacement demand for masonry structures. 相似文献
15.
Hysteretic energy dissipation in a structure during an earthquake is the key factor, besides maximum displacement, related to the amount of damage in it. This energy demand can be accurately computed only through a nonlinear time‐history analysis of the structure subjected to a specific earthquake ground acceleration. However, for multi‐story structures, which are usually modeled as multi‐degree of freedom (MDOF) systems, this analysis becomes computation intensive and time consuming and is not suitable for adopting in seismic design guidelines. An alternative method of estimating hysteretic energy demand on MDOF systems is presented here. The proposed method uses multiple ‘generalized’ or ‘equivalent’ single degree of freedom (ESDOF) systems to estimate hysteretic energy demand on an MDOF system within the context of a ‘modal pushover analysis’. This is a modified version of a previous procedure using a single ESDOF system. Efficiency of the proposed procedure is tested by comparing energy demands based on this method with results from nonlinear dynamic analyses of MDOF systems, as well as estimates based on the previous method, for several ground motion scenarios. Three steel moment frame structures, of 3‐, 9‐, and 20‐story configurations, are selected for this comparison. Bias statistics that show the effectiveness of the proposed method are presented. In addition to being less demanding on the computation time and complexity, the proposed method is also suitable for adopting in design guidelines, as it can use response spectra for hysteretic energy demand estimation. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
16.
In displacement-based seismic design, constant-ductility strength demand spectra （CDSDS） are very useful for preliminary design of new structures where the global displacement ductility capacity is known. The CDSDS can provide the required inelastic lateral strength of new structures from the required elastic lateral strength. Based on a statistical study of nonlinear time-history for an SDOF system, the mean CDSDS corresponding to four site conditions are presented and approximate expressions of the inelastic spectra are proposed, which are functions of the structural period and ductility level. The effects of site conditions, structural period, level of ductility, damping and post-yield stiffness of structures on CDSDS are also investigated. It is concluded that site conditions, ductility level and structural period have important effects on the CDSDS and damping, post-yield stiffness effects are rather complex and of minor importance. The damping, post-yield stiffness effects depend on both the level of ductility and the natural period of structures. 相似文献
17.
The paper investigates the degree of accuracy achievable when some non‐linear static procedures based on a pushover analysis are used to evaluate the seismic performance. In order to assess the significance of different sources of errors, three types of structural systems are analysed: (i) single‐degree‐of‐freedom (SDOF) systems with different hysteretic behaviour; (ii) shear‐type multi‐degree‐of‐freedom (MDOF) systems with elastic–perfect plastic (EPP) shear force–interstorey drift relationships; (iii) a steel moment‐resisting frame with rigid joints and EPP moment–curvature relationship. In SDOF systems, the source of approximation comes only from the calibration of the demand spectrum, while in MDOF systems some further errors are introduced by the schematization with an equivalent SDOF system. The non‐linear static procedures are compared with rigorous time‐history analyses carried out by considering ten generated earthquake ground motions compatible with the Eurocode 8 elastic spectra. It was found that SDOF systems with longer periods satisfy the equal displacement approximation regardless of the hysteretic model, while hysteresis loops with smaller energy dissipated indicate lower response for shorter periods. This is the opposite of what predicted by the ATC‐40 capacity spectrum method, which underestimates and overestimates, respectively, the actual response of low‐ and high‐ductility systems. Conversely, the inelastic spectrum method proposed by Vidic, Fajfar and Fischinger leads to the most accurate results for all types of structural systems. The analyses carried out on EPP shear‐type frames point out a large concentration of the ductility demand on some storeys. However, such a concentration markedly reduces when some hardening is accounted for. Copyright © 2006 John Wiley & Sons, Ltd. 相似文献
18.
A simple analytical procedure is developed for calculating the seismic energy dissipated by a linear SDOF system under an earthquake ground excitation. The ground excitation is specified by its pseudo-velocity spectra and effective duration whereas the SDOF system is defined by its natural period of vibration and viscous damping ratio. However, the derived relationship for the energy dissipation demand under an earthquake excitation is sensitive neither to the viscous damping ratio nor the ductility ratio when the SDOF system undergoes inelastic response. Accordingly, the proposed relationship can be employed in an energy-based seismic design procedure for determining the required energy dissipation capacity of a structural system. 相似文献