共查询到20条相似文献，搜索用时 171 毫秒
1.
WANG Xiaoqiong XU Jianguo ZHAO Chenxu LIU Tongyuan GE Hongkui SHEN Yinghao WU Shan YU Jiayao HUANG Rongyan 《中国地震研究》2020,34(2):167-186
The premise of hydraulic fracturing is to have an accurate and detailed understanding of the rock mechanical properties and fracture propagation law of shale reservoirs. In this paper, a comprehensive evaluation of the mechanical properties of the shale oil reservoir in the south of Songliao Basin is carried out. Based on the experiments and the in-situ stress analysis, the fracture propagation law of three types of shale reservoirs is obtained, and the suggestions for fracturing are put forward. The results have shown that the fracture propagation of pure shale and low mature reservoir is easy to open along the bedding plane under compression loading, which is greatly influenced by the bedding. Sand-bearing shale is slightly better, the fractures of which are not easy to open along the bedding plane. The mechanical experimental results show that all the samples have the characteristics of low compressive strength, low Young''s modulus and strong anisotropy, indicating that the shale oil reservoir is certain plastic, which is related to its high clay mineral content and controlled by the bedding development. Compared with pure shale and low mature shale, the sand-bearing shale has less clay content and less developed bedding, which maybe the main reason for its slightly better brittleness. Overall, the expansion of hydraulic fracture is controlled by in-situ stress and bedding. Because of the development of bedding, it is easy to form horizontal fractures. Thus it is not suitable for horizontal well fracturing. Because of the high content of clay minerals, the applicability of conventional slick hydraulic fracturing fluid is poor. It is suggested to use vertical well or directional well to carry out volume fracturing. In this way, the effect of bedding can be effectively used to open and connect the bedding and form a larger fracture network. 相似文献
2.
Shale is observed to have strong anisotropy due to its unique mineralogy and microstructure, and this anisotropy property has significant impact on seismic and well-log data. The organic-rich marine shale in the southern and eastern Sichuan Basin is one of the most important shale-gas reservoir formations in China. To investigate the elastic anisotropy of this shale and its influencing factors, we performed ultrasonic velocity measurements, X-ray diffraction analysis, rock-eval pyrolysis and vitrinite reflectance measurement on the samples from the Upper Ordovician Wufeng Formation and the Lower Silurian Longmaxi Formation. The experimental results show the that:(1) the velocity anisotropy of the Wufeng-Longmaxi(WL) shale varies from 10% to 50%, and most samples have strong anisotropy;(2) the P-and S-wave anisotropy parameters(Thomsen's εand γ) increase with clay contents, but this relationship can be greatly affected by the clay orientation index;(3) organic matter content(OMC) is found to have little influence in seismic anisotropy for the over mature WL shale, whereas the OMC determines the magnitude of anisotropy of immature/mature shales(e.g. the Bakken shale or the Bazhenov shale) according to the published literatures, because organic matters in shales of different maturity have different morphologies and distributions;(4) the OMC of WL shale has positive correlation with quartz content, and this weakens the correlation between OMC and the magnitude of anisotropy to a certain extent. The results of this study provide an important rock-physics basis and data support for seismic anisotropy exploration, quantitative interpretation and resource evaluation of the organic-rich marine shales in southern China. 相似文献
3.
Quanyou LIU Peng LI Zhijun JIN Yuewu SUN Guang HU Dongya ZHU Zhenkai HUANG Xinping LIANG Rui ZHANG Jiayi LIU 《中国科学:地球科学(英文版)》2022,65(1):118-138
Lacustrine shale is an important target for the exploration of unconventional oil and gas in China beyond marine shale gas.However,the formation environment of lacustrine shale differs from that of marine shale,resulting in a different reservoir composition,organic matter,oil and gas content,and hydrocarbon mobility.In this study,the Chang 7 shale of the Yanchang Formation in the Ordos Basin was used to analyze the effect of volcanic activity on the paleoproductivity and preservation conditions during the formation of lacustrine shale.The results show that algae and bacteria were developed before the eruption.After the eruption,the number of bacteria declined,but the increased prosperity of algae reflects that the volcanic activity enhanced ancient productivity.The sulfate generated by volcanic activity promotes bacterial sulfate reduction,and the produced H2S leads to a strong reducing environment in the waterbody,which is conducive to the preservation of organic matter.Organic geochemical analysis shows that the black shale in the shale strata has a high total organic carbon(TOC)content and strong hydrocarbon generation potential,whereas the tuff has a low TOC content and can scarcely generate hydrocarbons,indicating that the tuff deposited by volcanic activity cannot be considered as effective source rock.In terms of storage space,shale is mainly laminar and dispersed,and it includes organic and inorganic pores.The development of organic pores is affected by thermal maturity,whereas inorganic pores mainly occur between detrital particles and crystals.Tuff is mainly supported by heterogeneous matrix and associated with alteration.Its pores include inter-and intragranular mineral pores.The development of tight sandstone pores is affected by compaction,cementation,and dissolution,which mainly consist of intra-and intergranular pores.The Chang 7 lacustrine shale generally contains oil,but different lithologies have different oil drainage efficiencies.Sandstone and shale exhibit the best and worst oil drainage efficiency,respectively.It is mainly affected by the pore size distribution,fluid properties,and rock wettability.Therefore,the development of shale oil should mainly focus on lacustrine shale formations with interbeds.The mutual dissolution of organic matter and hydrocarbons in the shale section leads to the poor mobility and difficult development of hydrocarbons. 相似文献
4.
《中国科学D辑(英文版)》2008,(Z2)
The studies on fluvial reservoir architecture are mainly aimed at outcrop and modern deposition,but rarely at the subsurface reservoir,so there are few effective methods to predict the distribution of subsurface reservoir architectures. In this paper,taking the meandering river reservoir of Guantao formation Gudao Oilfield,Jiyang depression,Baohai Gulf Basin,East China as an example,the archi-tectural modeling method of complex meandering belt reservoir is proposed,that is hierarchy con-straint,pattern fitting and multi-dimensional interaction. Architectures of meandering river reservoir can be divided into three hierarchies: meandering channel sandbody,point bar and lateral accretion body. Different hierarchies of the quantitative architecture pattern are fitted to subsurface well data (including dynamic monitoring data) in different hierarchies through one-dimensional hole,2D profiles and plane and 3D space,which are verified by each other. And then 3D model in different hierarchies is established. At the same time,the quantificational relationship between width of active river and the scale of point bar is set up,and the scale of lateral accretion sand body and shale beddings is con-firmed with horizontal well data. The study not only has significant meaning on the development of geology,but also can improve the oilfield exploitation greatly. 相似文献
5.
《中国科学D辑(英文版)》2008,(4)
An igneous intrusion of 94m thick was discovered intruding into the Silurian sandstone from Tazhong 18 Well. The petroleum previously preserved in the Silurian sandstone reservoir was altered into black carbonaceous bitumen by abnormally high heat stress induced by the igneous intrusion. The reflec-tance of the carbonaceous bitumen reaches as high as 3.54%, indicating that the bitumen had evolved into a high thermal evolution level. Similar to the Silurian samples from the neighboring Tazhong 11, Tazhong 12, Tazhong 45 and Tazhong 47 wells, the distribution of C27, C28 and C29 steranes of the car-bonaceous bitumen is still "V" -shaped and can still be employed as an efficient parameter in oil source correlation. The "V" -shaped distribution indicates that the hydrocarbons from the Tazhong 18 and the neighboring wells were all generated from the Middle-Upper Ordovician hydrocarbon source rocks. However, the oil source correlation parameters associated with and terpanes had been changed greatly by the high heat stress and can no longer be used in oil source correlation. The δ 13C values of the pe-troleum from the neighboring wells are between -32.53‰ and -33.37‰, coincident with those of the Paleozoic marine petroleum in the Tarim Basin. However, the δ 13C values of the carbonaceous bitumen from the Tazhong 18 Well are between -27.18‰ and -29.26‰, isotopically much heavier than the pe-troleum from the neighboring wells. The content of light hydrocarbons (nC14-nC20) of the saturated hydrocarbon fraction in the carbonaceous bitumen is extremely higher than the content of heavy hy-drocarbons. The light/heavy hydrocarbon ratios (ΣnC21-/ΣnC22 ) are between 4.56 and 39.17. In the saturated fraction, the even numbered hydrocarbons are predominant to the odd numbered, and the OEP (Odd to Even Predominance) values are between 0.22 and 0.49. However, the content of light hy-drocarbons in the petroleum from the neighboring wells is relatively low and the content of the even numbered hydrocarbons is almost equal to that of the odd numbered. Compared with the samples from the neighboring wells, the abundance of non-alkylated aromatic hydrocarbons, such as phenanthrenes, and polycyclic aromatic hydrocarbons (PAHs), such as fluoranthane, pyrene, benzo[a]anthracene and benzofluoranthene, are relatively high. 相似文献
6.
Cement content of carbonate in tight sandstone near section is much higher than that of the normal sandstones far away from the fault of well Xia503,in the Huimin sag in Linnan sub-depression.In order to understand the origin and its impact on fault sealing,analyses of the whole-rock minerals,casting thin sections,cathodoluminescence,isotope and physical properties are conducted on cores from well Xia503.It is found that 13C varies from 0.1‰to 0.6‰with the average value of 0.42‰,18O varies from 13.5‰to 12.3‰with the average of 13.1‰,and C–O isotope plotting points are distributed in the low to moderate temperature area of the hydrothermal dolomite.According to the occupied relationship,cathodoluminescence,and C–O isotope feature,the carbonate cementation could be divided into four stages:calcites,dolomite,ankerite,and ferrocalcite.It is discovered that the carbonate cementation is negatively related to reservoir physical property,with the porosity of 4.8%,permeability of 0.37 mD,and displacement pressure of 1.97 MPa in the tight sandstone,which have increased by almost one order of magnitude compared to the porosity of 14.3%,permeability of 3.73 mD,and displacement pressure of 0.27 MPa in the normal sandstone,which is far away from the fault.Regardless of the lithology of the counterpart wall of the fault,only the displacement pressure difference caused by carbonate cementation between the tight sandstone and the normal sandstone could seal 41 m high oil column. 相似文献
7.
《中国科学D辑(英文版)》2008,(Z1)
The components and carbon isotope of gases in inclusions are one of the most important geochemical indexes for gas pools.The analysis results of the components and carbon isotope of gases from inclusions in reservoir layers of Upper Palaeozoic gas pools in the Ordos Basin show that most inclusions grown in reservoir sandstone are primary inclusions.There is only a little difference about the components and carbon isotope between the well gases and the secondary inclusions gases.This indicated that the epigenetic change of gas pools is little.This difference between the well gases and the secondary inclusions gases is caused by two reasons:(i)The well gases come from several disconnected sand bodies buried in a segment of depth,while the inclusion gases come from a point of depth.(ii)The secondary inclusions trapped the gases generated in the former stage of source rock gas generation,and the well gases are the mixed gases generated in all the stages.It is irresponsible to reconstruct the palaeo-temperature and palaeo-pressure under which the gas pool formed using carbon dioxide inclusions. 相似文献
8.
Introduction The study of acoustic emission evidenced by rock fracture experiments is the most important field of seismology. By means of the rock fracture technique system, many researchers tried to prove the possible relationship between some parameters such as b value and the stress variation prior to rock fracture using the acoustic emission results from different types of rock fracture ex-periments (MA et al, 2004a, b; Lockner, 1993; JIANG and ZHANG, 1998). In order to investigate th… 相似文献
9.
Seismic Signatures of Rock Pore Structure 总被引：1，自引：0，他引：1
Yue-FengSun 《应用地球物理》2004,1(1):42-49
Rock pore structure is one of the important parameters in controlling both seismic wave velocity and permeability in sandstones and carbonate rocks. For a given porosity of two similar rocks with different pore structures, their acoustic wave speeds can differ 2 km/s, and permeability can span nearly six orders of magnitude from 0.01 mD to 20 D in both sandstone and limestone. In this paper, we summarize a two-parameter elastic velocity model reduced from a general poroelastic theory, to characterize the effect of pore structures on seismic wave propagation. For a given mineralogy and fluid type of a reservoir, this velocity model is defined by porosity and a frame flexibility factor, which can be used in seismic inversion and reservoir characterization to improve estimation of porosity and reserves. The frame flexibility factor can be used for quantitative classification of rock pore structure types (PST) and may be related to pore connectivity and permeability, using both poststack and prestack seismic data. This study also helps explain why amplitude versus offset analysis (AVO) in some cases fails for the purpose of fluid detection: pore structure effect on seismic waves can mask all the fluid effects, especially in carbonate rocks. 相似文献
10.
Quantitative characterization of reservoir space in the Lower Silurian Longmaxi Shale,southern Sichuan,China 总被引：1，自引：0，他引：1
WANG YuMan DONG DaZhong YANG Hua HE Ling WANG ShiQian HUANG JinLiang PU BoLing WANG ShuFang 《中国科学:地球科学(英文版)》2014,57(2):313-322
Based on the drilling data of the Upper Ordovician Wufeng Shale and the Lower Silurian Longmaxi Shale in southern Sichuan Basin,the construction of matrix pores and the development condition of fractures in a marine organic-rich shale are quantitatively evaluated through the establishment of the reservoir petrophysical models and porosity mathematical models.Our studies show that there are four major characteristics of the Longmaxi Shale confirmed by the quantitative characterization:(1)the pore volume of per unit mass is the highest in organic matter,followed in clay minerals,finally in brittle minerals;(2)the porosity of the effective shale reservoir is moderate and equal to that of the Barnett Shale,and the main parts of the shale reservoir spaces are interlayer pores of clay minerals and organic pores;(3)the porosity of the organic-rich shale is closely related to TOC and brittle mineral/clay mineral ratio,and mainly increases with TOC and clay mineral content;(4)fractures are developed in this black shale,and are mainly micro ones and medium-large ones.In the Longmaxi Shale,the fracture density increases from top to bottom,reflecting the characteristics with high brittle mineral content,high Young’s modulus,low Poisson's ratio and high brittleness at its bottom. 相似文献
11.
龙马溪组页岩是目前国内页岩气勘探的主要层位之一.由于岩石物理实验结果具有区域性,龙马溪组页岩的岩石特征与其地震弹性性质的响应规律需要开展相关的实验和理论研究工作予以明确.本研究基于系统的微观结构观察(扫描电镜和CT成像技术)和岩石物理实验来分析龙马溪组页岩样品地震弹性性质的变化规律,并依据微观结构特征建立相应的地震岩石物理表征模型.研究结果表明,石英含量对龙马溪组页岩的孔隙度以及有机碳(TOC)含量具有一定的控制作用,TOC和黄铁矿主要赋存于孔隙中;岩石骨架组成亦受控于石英或粘土含量,在石英含量大于40%(对应粘土含量小于30%)时,以石英、粘土共同作为岩石骨架,而粘土含量大于30%时,则以粘土作为岩石的骨架.因此,岩石骨架组成矿物、TOC含量、孔隙度共同制约龙马溪组页岩的地震弹性性质,富有机质储层岩石通常表现出低泊松比、低阻抗和低杨氏模量的特征,但由于支撑矿物的转换,某些富有机质页岩亦可表现为高阻抗特征.粘土矿物的定向排列仍然是造成页岩样品表现出各向异性的主要原因,各向异性参数与粘土含量具有指数关系.基于龙马溪组页岩的岩性特征及微观结构特征,可以利用自洽模型(SCA)、微分等效模量模型(DEM)和Backus平均模型的有效组合较为准确地建立龙马溪组页岩的地震岩石物理模型,实验结果和测井数据验证了模型的准确性.研究结果可为龙马溪组页岩气储层的测井解释和地震"甜点"预测提供依据. 相似文献
12.
常规声波波阻抗由于缺乏横波的信息，使得它对于流体的变化很不敏感，而弹性波阻抗反演，除了与纵波速度，密度有关之外，还与横波速度、入射角度有关，由于考虑了AVO(Amplitude Variation with Offset)效应，使得对流体和岩性的预测能力增强.本文将弹性波阻抗反演应用于时移地震中，采用AVA(Amplitude Variation with Angle)约束稀疏脉冲反演来进行弹性波阻抗反演，得到纵横波阻抗等弹性参数，通过交会图分析，将弹性参数转换为油藏参数，如预测含水饱和度的变化，通过本方法可增强对储层流体的预测，提高储层管理能力. 相似文献
13.
Tuning is the effect of interference between the reflections from the top and bottom of a thin layer on the amplitude of the composite reflection. For a homogeneous sandstone reservoir containing an oil column overlying brine, interference between the reflection from the top reservoir and the oil/water contact is a function of the height of the oil column. If the properties of the sandstone do not vary across the oil/water contact, the SS, PS and SP reflection coefficients from the oil/water contact are small in comparison to the PP reflection coefficient. This allows analytic expressions for the effective PP and PS reflection coefficients from the reservoir to be derived that include all P‐wave multiples within the oil column. For a given source/receiver offset, the component of the wavevector inside the oil column normal to the interface is larger for the PPPP reflection than for the PPPS reflection, due to the asymmetry in the raypath for the PPPS reflection. The PPPS reflection is therefore useful for determining oil‐column heights larger than that discriminated by the PPPP reflection, especially when used at wider offsets. A convenient classification of the AVO response of hydrocarbon‐bearing sandstone reservoirs overlain by shale is the scheme of Rutherford and Williams. Class 1 sands have higher acoustic impedance for normal incidence than the overlying shale, Class 2 sands have nearly the same acoustic impedance as the shale and Class 3 sands have lower acoustic impedance. Synthetic shot gathers calculated for these three classes as a function of oil‐column height show that a combination of the PPPP and the PPPS amplitudes can be plotted as a tuning trajectory, which can be used to determine the oil‐column height. This method is most sensitive for reservoirs that belong to AVO classes 1 and 2, and therefore may be useful in AVO analysis of Class 1 and 2 reservoirs where the traditional AVO indicators (developed for Class 3 reservoirs) do not work very well. These results demonstrate the usefulness of shear waves recorded in the marine environment at wide offsets. 相似文献
14.
密度参数是页岩储层评价的重要敏感参数,但通常认为准确获得密度信息难度较大.本文探索提出了一种稳定的基于弹性阻抗的叠前密度反演方法,以提高优质页岩的识别精度.首先,基于不同的参数化弹性阻抗方程开展密度敏感性分析,优选了敏感性最高的Aki-Richards近似弹性阻抗方程作为反演方程.然后,在弹性阻抗方程线性化的基础上,假设反演方程系数矩阵的逆存在,将密度(取对数)表示为多个角度弹性阻抗(取对数)的加权和,通过井旁道弹性阻抗反演结果与测井数据的回归求取加权系数,避免了常规反演方法对大型系数矩阵的求逆计算,从而提高了密度反演的稳定性,同时由于利用测井资料作为匹配目标,密度反演的精度也得到了提高.模型试算和涪陵页岩气田的实际资料应用实践均表明了该方法能够有效地提高密度反演的精度与稳定性. 相似文献
15.
弹性阻抗是波阻抗的扩展,可以更好的反映储层和流体性质.常规弹性阻抗方程忽略了各向异性的影响,不能正确地描述各向异性介质中弹性阻抗的性质.本文基于Ruger给出的VTI介质反射系数近似公式,结合Connolly推导弹性阻抗的思想,推导出了一种VTI介质中的弹性阻抗方程.通过引入归一化常数,对方程进行了标准化,消除了方程量纲随角度变化而变化的不足.结合常规弹性阻抗反演的流程,得出了VTI介质中弹性阻抗反演的流程.最后,开展了从VTI介质弹性阻抗数据体中提取岩石物性参数的方法研究.数值测试表明,所讨论的参数提取方法具有一定的理论和应用价值. 相似文献
16.
R. N. Vasin A. N. Nikitin T. Lokajicek V. Rudaev 《Izvestiya Physics of the Solid Earth》2006,42(10):815-823
The influence of temperature gradients and heating rate on crack formation in quasi-isotropic samples of marble and sandstone is studied using acoustic emission records. The behavior of velocities and attenuation of elastic waves in the samples is also examined. The crystallographic textures of marble and sandstone are measured by the neutron diffraction method, and it is shown that temperature gradients of up to 52°C/cm do not lead to a change in the textures. It is established that the temperature dependence of acoustic activity in the sandstone samples strongly depends on the internal heating rate. The maximum acoustic activity of the sandstone samples was observed at maximum temperature gradients in the samples. The temperature dependence of acoustic activity in marble differs significantly from that in sandstone. Maximums of acoustic activity in the marble samples are observed at temperatures of 30–60 and higher than 200°C. A decrease in acoustic activity was recorded in the interval between these temperatures. Such behavior suggests a predominant role of the surface structure and the concentration of surface defects in the process of crack formation in marble. During cooling, all samples demonstrate similar behavior: maximum acoustic activity is observed at the switching-off of the heating element and the emission activities of different samples are comparable in intensity. 相似文献
17.
储层物性参数是储层描述的重要参数,常规的基于贝叶斯理论的储层物性参数反演方法大多是通过反演获得的弹性参数进一步转换而获得物性参数,本文提出一种基于弹性阻抗数据预测储层物性参数的反演方法.该方法主要通过建立可以表征弹性阻抗与储层物性参数之间关系的统计岩石物理模型,联合蒙特卡罗仿真模拟技术,在贝叶斯理论框架的指导下,应用期望最大化算法估计物性参数的后验概率分布,最终实现储层物性参数反演.经过模型测试和实际资料的处理,其结果表明本文提出的方法具有预测精度高,稳定性强,横向连续性好等优点. 相似文献
18.
相对于常规砂岩,致密砂岩在岩石物理性质、力学性质等方面具有明显差异,并呈现出很强的非均质性.岩石物理模型能将储层参数与地震特性信息联系起来,因此可以作为致密砂岩储层参数与地震特性信息转换的桥梁.常规的岩石物理模型通常只考虑单一因素(例如非均匀性,单一孔隙,单一尺度等),建立的岩石物理模板并不适用于致密砂岩.本文针对高饱和气、微裂隙发育、非均质性强的致密砂岩储层,利用Voigt-Reuss-Hill模型计算混合矿物的弹性模量,采用微分等效介质(DEM)模型描述含裂隙、孔隙岩石的骨架弹性模量,基于Biot-Rayleigh波动方程构建了岩石物理弹性模板,给出了致密砂岩储层弹性参数与物性的关系.基于测井数据和实验数据对岩石物理弹性模板进行校正,并将校正后的岩石物理弹性模板结合叠前地震资料应用于川西地区储层孔隙度与裂隙含量预测.结果显示,反演裂隙含量、孔隙度与储层试气报告、测井孔隙度基本吻合,表明该模板能够较合理地应用于致密砂岩储层孔隙度及裂隙含量解释中. 相似文献
19.
洪泽地区由于沉积的特点，储层横向变化快，油藏受构造、岩性、油源多因素控制。在对该区三维AVO属性体解释中，利用多元回归方法求取了横波曲线，分岩性和含油气性统计了纵、横波、泊松比参数分布规律，建立了本区的含油砂岩的正演模型，从而降低了AVO解释的多解性。通过井-震结合对四种AVO属性数据体进行了标定，并确定了各属性体应用范围，进而进行了储层和含油气检测。实践表明，该方法能有效地利用AVO属性数据体进行储层预测及油气检测，具有一定的推广价值。 相似文献