首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 125 毫秒
1.
王安简  陈运泰 《地球物理学报》2021,64(10):3442-3451
应用国内外24个具有"X"形或"L"形(不完整的"X"形)共轭破裂特征的地震资料,以及云南鲁甸、盈江两次共轭破裂地震的详细重定位数据,运用库仑破坏准则揭示的脆性破裂的共轭破裂角与介质的内摩擦系数之间的关系,测定与计算了地震共轭角与地壳的内摩擦系数,探讨了库仑破坏准则与安德逊破裂理论应用于宏观尺度破裂即天然地震问题.结果 表明,在国际、国内不同地区不同年代的多次共轭破裂地震中,共轭角与内摩擦系数的优势分布分别为65°~75°与0.27~0.47.在同一地区或相近地区发生的地震,其共轭角与内摩擦系数在数值上也相近.库仑破坏准则与破裂的安德逊理论,不但适用于实验室的小样本岩石破裂实验结果,而且适用于宏观尺度破裂即天然地震.通过共轭角的测定,可以确定地壳的内摩擦系数,是一种增进对地壳的内摩擦特性的认识的简易、直接的方法.  相似文献   

2.
雅江地震序列时空分布特征   总被引:2,自引:0,他引:2  
2001年2月14日和2月23日在四川省雅江县发生Ms5.0地震,对这两次地震和余震进行了时,空,强特征的初步分析研究,从能量分布的角度看雅江地震是前-主-余震型地震,两次地震破裂面构成共轭破裂。  相似文献   

3.
本研究采用双差定位法对2014年 8月3日至7日期间鲁甸MS6.5级主震及647个余震序列进行重新定位,得到471个重定位结果.结果显示,主震的震源深度为13.3 km,与破裂过程显示的初始破裂深度较为接近,余震序列呈现出近东西向-北西向的不对称共轭状分布,近东西向长约17 km,而北西向长约22 km,小震优势分布深度为10 km以上,且由主震处沿共轭断层分别向东南向和近东西向逐渐往10 km深度以上的浅部迁移.小震分布还展示出发震断层高倾角分布,且与昭通-鲁甸断裂分支断裂包谷垴-小河断裂活动相关.由于主震破裂的质心深度可为深入认识本次地震灾害严重提供重要证据,为此我们采用gCAP(generalized Cut And Paste)方法反演了包括主震在内共5个4.0级以上地震的震源机制解,结果显示主震质心深度仅约5.0 km,与已有破裂过程显示的较大滑移量处于2~8 km之间的深度一致.本次主震错断了互为共轭的两条断裂,这种共轭破裂模式与矩心深度较浅,可能为本次地震致灾严重的重要原因.  相似文献   

4.
华北地区的共轭地震构造带   总被引:10,自引:3,他引:10  
本文采用小地震活动图象和4.0级(Ms)以上地震震源机制资料的构造分析方法,得到一幅华北地区震源构造在地面的投影分布图,它显示4条NNE-NE向和1条NWW-NW向地震构造带交切成的共轭剪切构造格架。每条地震构造带又由一系列共轭剪切构造组成。由发生在带内的5个大震序列共轭破裂特征发现,共轭地震构造的孕震与控震作用是地震构造带形成的机制。  相似文献   

5.
冯希杰  苏刚 《内陆地震》1993,7(3):225-233
依据地震破裂、地震形变带、前震和余震分布,对中国大陆共轭破裂强震进行了初步研究。结果表明,强震共轭破裂现象较普遍,据资料至少有12个单强震、7个双主震和2个主震——强余震为共轭破裂强震。其共轭破裂特征在地震形变带展布、烈度等震线形态、前震和余震分布等方面表现明显。另外,共轭破裂强震具有共轭破裂面方位之一多为北北西向、双主震之间和主——强余震之间相隔时间为“7”和“9”的节律这2个主要的共同点。  相似文献   

6.
王安简  陈运泰 《地震学报》2022,44(6):980-997
安德逊理论表明地震的共轭破裂现象可以用库仑准则解释,断层面夹角与地下岩石内摩擦系数之间存在简单的定量关系。基于本文提出的通过共轭地震计算介质内摩擦系数的方法,对国内外19个具有X形或不完整的X形(L形)共轭破裂特征的地震进行系统性分析,与震源机制、区域应力轴方向等资料进行对比,确定共轭断层面,进而确定共轭面夹角并计算岩石的内摩擦系数。研究结果进一步证实了天然地震的共轭破裂与实验室岩石破裂具有较好的一致性,给出了库仑准则与安德逊理论在大尺度下也成立的证据,表明通过共轭角确定地下介质的内摩擦系数是对地下介质特性认知的有益补充。   相似文献   

7.
1976年盐源—宁蒗地震序列的破裂特征   总被引:1,自引:0,他引:1  
张四昌  王绍晋 《地震》1995,(3):275-279
使用地震活动图象和震源机制资料的构造分析方法,研究盐源-宁蒗地震序列的破裂特征。结果认为:6.7级地震破裂面是北北东向左旋走滑断层,5.6级6.4级地震破裂面是两条北西西向右旋走滑断层,构成以北北东向断为主干的共轭破裂组合,该序列受弥渡-木里地壳深部活动断裂带控制。  相似文献   

8.
本文根据地震和地震构造等资料,研究华北地区公元1300年以来MS≥6.5级地震的发震断裂的基本参数.利用1966年以来隆尧、海城、渤海和唐山等有仪器记录的地震的相关参数进行回归分析得出了地震烈度Ⅷ度区长轴长度与余震区长轴长度的回归关系式及震级与震源体破裂长度的回归关系式.用余震区长轴长度代替震源体的破裂长度,从而给出各次地震的震源断层破裂长度.利用地震测深的地壳结构构造剖面、地震序列的震源分布、壳内低速层和地壳上部的构造、盆地构造与居里面分布和已知地震震源分布等资料推断了震源破裂的上下界.基于一定的合理假定推导出了断层滑动角的估计方法,并应用于本研究区,得出了各次事件的断层滑动角.  相似文献   

9.
关于1937年菏泽7级地震成因的探讨   总被引:1,自引:0,他引:1  
本文以三维空间角度,从菏泽地震的地震构造环境、构造应力场、震源闭锁形式和地震玻裂机制等方面探讨了菏泽地震的成因。提出了断裂空间交汇闭锁模式和共轭破裂发震机制,分析了菏泽地震发生在聊考断裂的东侧、濮阳——开封上地幔隆起东翼的原因。  相似文献   

10.
从IRIS全球数字地震台网长周期记录中, 选取震中距位于30deg;~90deg;的垂直向远震P波资料, 反演了2003年9月27日中、 俄、 蒙边界MS7.9地震及10月1日MS7.3强余震的地震矩张量解, 研究了MS7.9地震的时空破裂过程. 参考余震的空间分布及周围断层走向, 确定MS7.9地震发震断层走向127deg;、倾角为79deg;、滑动角为171deg;. MS7.9地震震源破裂过程反演结果表明,整个破裂过程持续了37 s,释放标量地震矩0.97times;1020 Nmiddot;m. 破裂主要发生在长110 km, 宽30 km的中地壳以上,最大位错3.6 m. 起始破裂处不是滑动量最大的地方. 断层面上显示出两个显著的、滑动量超过2.0 m的破裂区. 破裂传播至MS7.3震源区附近时, 滑动量迅速减小,显示出破裂传播过程的受阻停止, 反映了障碍体引起的破裂过程的不均匀性.   相似文献   

11.
The rupture dimensions of earthquake faults are important parameters for characterizing earthquake ruptures and ground motions. Two key parameters to be determined are the rupture depth and dip angle of earthquake faults. Dislocation theory in an elastic half space indicates that if a seismic rupture directly runs up to the ground surface, there exist zero points of horizontal strain in the surface deformation, which correspond to the rupture depths, except for pure strike-slip faults. In this study, we use numerical simulations to investigate the possibility of inferring rupture depths from zero-strain points for cases of buried faults and heterogeneous media. The results show that the correspondence of zero-strain points to the rupture depths can be influenced by the heterogeneity of the underground media and the stress field. For buried faults, the correspondence relationship is approximately valid when the fault depth is <1 km. In addition, the range of earthquake fault dip angles can be estimated by horizontal displacements on the ground. We also study how to determine the rupture depths of faults from InSAR data after large earthquakes, and successfully apply the method to the 2008 Wenchuan earthquake. The method proposed here, which determines the parameters of fault geometry according to surface deformation, is simple and easy to perform. With independent of aftershocks, it can provide valuable constraints to kinematic inversions.  相似文献   

12.
Few building codes contains provisions fault surface ruptures and accompanying soil deformations which constitutes a great risk to human lives, buildings and infrastructure. A numerical and experimental comparison show a fair agreement of result. Analysis of “real” scale show the how water increases the incompressibility of wet soil causing shear deformations to become larger and conjugate ruptures to appear for reverse faults. Field observations and numerical analysis indicates that horizontal compression of soil surrounding underground structures should be taken into account in design.  相似文献   

13.
大地震与共轭性构造活动   总被引:2,自引:2,他引:2  
本文讨论的是大陆型浅源大地震的一种构造活动方式。通过对六个大震的分析表明,大震序列具有共轭的双向破裂面。两个方向的破裂面发育程度一般不同。这主要取决于震区介质的不均一性。联系一些大震前的类似现象,指出大震前后共轭性构造活动现象的研究,对主震和强余震的预测有一定的意义  相似文献   

14.
江淮地区地震精定位及b值随深度的变化研究   总被引:1,自引:0,他引:1  
使用双差地震定位法,利用安徽及邻省50个地震台站记录的1976年到2008年的551次M_L≥2.3地震,其中初始定位有205个无深度数据,包括数字化资料和传统的模拟资料,共5464条P波走时资料。经重新定位后得到其中468次地震的基本参数。重新定位结果显示了本地区较精细的震中分布图像和震源深度剖面图像,震源深度优势分布在6—10km,平均深度为10km,部分震中位置与震源深度变化较大的地震向断裂带靠近。基于地震精确定位结果,系统地计算了不同深度段的b值,发现研究区b值随震源深度的增加具有系统减小的趋势,且在地壳10km左右的减小趋势最为突出。表明江淮地区的地壳分层结构相对明显,在地壳浅部(0—10km)以小震为主,大地震较少,故b值高;而在深处(10—25km),大地震相对较多,b值减小。这一现象的背后物理机制可以从地壳介质复杂程度与应力状态的变化得以解释,破裂易于在地壳介质相对均匀、岩石静压力较高的地壳深处成核形成大地震。推测江淮地区未来强震多发生在10km以下的地壳深部。  相似文献   

15.
董森  张海明 《地球物理学报》2019,62(11):4156-4169
断层的几何形态是地震破裂传播过程的控制因素之一,从而影响着地震的危险性.Y型分叉断层是断层的多种复杂几何形态当中常见的一种,研究断层的分叉特征对震源破裂传播的影响,对于深入认识复杂几何形态断层的动力学特征具有重要意义.本文利用边界积分方程方法,模拟了612个分叉面,通过改变分叉断层面的分叉角度来分析断层分叉对传播的影响,并定量分析了分叉面之间以及主断层对分叉面的应力作用机制.模拟结果表明:分叉断层的一个断层分叉的破裂,既受到主断层作用的影响,也受到该断层另一分叉的作用的影响,是两者共同作用的结果.其中,主断层的作用基本上只与该断层分叉与主断层延长面的夹角有关,而与该断层另一分叉关系不大;该断层另一分叉的作用主要与两个断层分叉的夹角有关,但同时也要考虑其破裂状况.对于破裂以超剪切速度到达断层分叉处的情况,主断层对于大角度和小角度分叉的破裂促进作用较强,而对中等角度分叉的破裂促进作用较弱;该断层另一分叉对破裂的作用随着两个断层分叉之间夹角的增加,由强烈的抑制转为促进.  相似文献   

16.
本文利用二维有限元方法计算了由一条、二条和三条不连续的羽列断层组成的多组剪切破裂带模型。研究表明,不连续剪切破裂带在运动学性质上与单一剪切断层相类似,存在着作为剪切破裂带整体尾端的张、压性四象限分布的现象,它们是强相互作用的岩桥区物质发生变形弱化,剪切破裂带两侧块体作相对运动在尾端的调整产物;岩桥区的构造力学性质和物质的材料力学参数是影响剪切破裂带尾端张、压性区应力集中程度和范围大小的两个重要因素。最后结合实例讨论了张、压性区的构造特征和破裂方式  相似文献   

17.
断层的破裂速度是描述地震震源过程的重要物理量.如果震源破裂的传播速度超过剪切波速,将会对地震波场产生影响,造成更大的破坏性.超剪切破裂的产生受多种因素影响,断层的几何形状是因素之一.本文针对弯折断层的情况,采用三维空间非结构化网格的边界积分方法计算参数空间中的破裂相图,从中分析超剪切破裂的产生条件.以15°、25°和40°为例,得到了不同断层弯折角度的破裂相图.在本文的初始应力设置下,通过对不同的无量纲化临界滑动弱化位移Dc和初始剪应力Te参数组合的结果进行交叉对比发现,对于弯折面处于压缩区的断层模型,不可持续传播的自发停止破裂的发生条件与弯折角无关.而对于可持续传播破裂,其在平面断层的传播速度也不受弯折角影响;在弯折部分,随弯折角度增大,破裂传播速度越小,正应力越大,破裂强度越大,破裂越难以越过弯折交界线继续传播(如40°).对比三个不同弯折角的相图,弯折角越小,越容易发生超剪切破裂,即发生超剪切的参数空间越大.同时,随着初始剪应力的增大,超剪切不仅可以发生在弯折面上,甚至在平面部分就可以发生.总体而言,Dc较小、Te较大时,破裂传播速度更大,更容易形成超剪切破裂.另外,因克服弯折交界处的正应力而产生的错位延迟效应也与弯折角度正相关.  相似文献   

18.
Whether or not ruptures nucleate in fluid-overpressured crust (λ v = P f/σ v > 0.4) is important because pore-fluids overpressured above hydrostatic lower fault frictional strength and may also vary through the earthquake cycle, acting as an independent variable affecting fault failure. Containment of fluid overpressure is precarious because pressure-dependent activation of faults and fractures allows drainage from overpressured portions of the crust. Discharge of fluids through activated fault-fracture permeability (fault-valve action) decreases overpressure so that subsequent failure depends on the cycling of both overpressure and frictional strength as well as tectonic stress. Geometric and mechanical considerations suggest that fluid overpressures are more likely to develop and be sustained in compressional/transpressional regimes as opposed to extensional/transtensional tectonic settings. On the basis of geophysical observations and force-balance analyses, subduction interface shear zones appear to be strongly but variably overpressured to near-lithostatic levels (λ v > 0.9) over the full depth range of seismogenic megathrusts. Strong overpressuring at seismogenic depths is also documented in active fold-thrust belts and in areas of ongoing compressional inversion (e.g., northern Honshu) where inherited normal faults are reactivated as steep reverse faults, requiring near-lithostatic overpressures (λ v → 1.0) at depths of rupture initiation. Evidence for overpressuring around strike-slip faults is less clear but tends to be strongest in areas of transpression. In areas of extensional tectonics coincident with particularly high fluid discharge, there is some evidence of overpressuring concentrated towards the base of the seismogenic zone. In general, because of the limited resolution of geophysical techniques, it is easier to make the case for rupture propagation through overpressured crust than to make a definitive case for the direct involvement of overpressured fluids in rupture nucleation, though in some instances the circumstantial evidence is compelling. An unresolved related issue is the heterogeneity of overpressuring. Do the active fault zones themselves serve as fluid conduits that are locally overpressured with respect to the surrounding crust?  相似文献   

19.
The seismogenic zone of subduction thrust faults   总被引:13,自引:0,他引:13  
Abstract Subduction thrust faults generate earthquakes over a limited depth range. They are aseismic in their seaward updip portions and landward downdip of a critical point. The seaward shallow aseismic zone, commonly beneath accreted sediments, may be a consequence of unconsolidated sediments, especially stable-sliding smectite clays. Such clays are dehydrated and the fault may become seismogenic where the temperature reaches 100--150°C, that is, at a 5--15 km depth. Two factors may determine the downdip seismogenic limit. For subduction of young hot oceanic lithosphere beneath large accretionary sedimentary prisms and beneath continental crust, the transition to aseismic stable sliding is temperature controlled. The maximum temperature for seismic behavior in crustal rocks is ~ 350°C, regardless of the presence of water. In addition, great earthquake ruptures initiated at less than this temperature may propagate with decreasing slip to where the temperature is ~ 450°C. For subduction beneath thin island arc crust and beneath continental crust in some areas, the forearc mantle is reached by the thrust shallower than the 350°C temperature. The forearc upper mantle probably is aseismic because of stable-sliding serpentinite hydrated by water from the underthrusting oceanic crust and sediments. For many subduction zones the downdip seismogenic width defined by these limits is much less than previously assumed. Within the narrowly defined seismic zone, most of the convergence may occur in earthquakes. Numerical thermal models have been employed to estimate temperatures on the subduction thrust planes of four continental subduction zones. For Cascadia and Southwest Japan where very young and hot plates are subducting, the downdip seismogenic limit on the subduction thrust is thermally controlled and is shallow. For Alaska and most of Chile, the forearc mantle is reached before the critical temperature, and mantle serpentinite provides the limit. In all four regions, the seismogenic zones so defined agree with estimates of the extent of great earthquake rupture, and with the downdip extent of the interseismic locked zone.  相似文献   

20.
板内逆断层地震破裂的基本特征及分段标志研究   总被引:1,自引:0,他引:1  
通过对16 个板内逆断层地震的基本类型、构造环境、地震地表破裂尺度、几何形态、运动学特征及余震分布图像的研究分析,较系统地归纳了板内逆断层地震破裂的基本特征及分段标志.研究表明:(1) 逆断层破裂往往沿走向延伸较短,常表现为二维面状分布形态;(2) 地震断层未出露地表或仅有部分出露地表;(3) 逆断层地震破裂较走滑断层和正断层产生的地震破裂更为复杂,不仅表现在构成整体破裂带的各个单条破裂的力学性质差异方面,而且表现在几何结构方面.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号