首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Qilian Shan and Hexi Corridor, located in the north of Tibetan plateau, are the margin of Tibetan plateau's tectonic deformation and pushing. Its internal deformations and activities can greatly conserve the extension process and characteristics of the Plateau. The research of Qilian Shan and Hexi Corridor consequentially plays a significant role in understanding tectonic deformation mechanism of Tibetan plateau. The northern Yumushan Fault, located in the middle of the northern Qilian Shan thrust belt, is a significant component of Qilian Shan thrust belt which divides Yumushan and intramontane basins in Hexi Corridor. Carrying out the research of Yumushan Fault will help explain the kinematics characteristics of the northern Yumushan active fault and its response to the northeastward growth of the Tibetan plateau.Because of limited technology conditions of the time, different research emphases and some other reasons, previous research results differ dramatically. This paper summarizes the last 20 years researches from the perspectives of fault slip rates, paleao-earthquake characteristics and tectonic deformation. Using aerial-photo morphological analysis, field investigation, optical simulated luminescence(OSL)dating of alluvial surfaces and topographic profiles, we calculate the vertical slip rate and strike-slip rate at the typical site in the northern Yumushan Fault, which is(0.55±0.15)mm/a and(0.95±0.11), respectively. On the controversial problems, namely "the Luotuo(Camel)city scarp" and the 180 A.D. Biaoshi earthquake, we use aerial-photo analysis, particular field investigation and typical profile dating. We concluded that "Luotuo city scarp" is the ruin of ancient diversion works rather than the fault scarp of the 180 A.D. Biaoshi earthquake. Combining the topographic profiles of the mountain range with fault characteristics, we believe Yumu Shan is a part of Qilian Shan. The uplift of Yumu Shan is the result of Qilian Shan and Yumu Shan itself pushing northwards. Topographic profile along the crest of the Yumu Shan illustrates the decrease from its center to the tips, which is similar to the vertical slip rates and the height of fault scarp. These show that Yumu Shan is controlled by fault extension and grows laterally and vertically. At present, fault activities are still concentrated near the north foot of Yumu Shan, and the mountain ranges continue to rise since late Cenozoic.  相似文献   

2.
On 31 July 1954, an MS7.0 earthquake occurred southeast of Minqin, Gansu Province, northwestern China. Its epicenter was located at the edge of the Alxa block, subject to northeastward compression of the Tibetan plateau, resulting in active tectonics there. Because of few records and field investigations, the seismogenic fault and tectonic setting of this event remain unclear. To probe the deep structure of this region, magnetotelluric (MT) measurements have been carried out near the epicenter, and new data of 28 sites were collected. Using the methods including the remote reference, "robust" and phase tensor decomposition, these MT data were processed, followed by NLCG two-dimensional inversion of the data to reveal the deep electrical structure of the study area. Combining with previous studies, geologic interpretation of the MT survey suggests that the Minqin earthquake of 1954 may be related to the Hongyashan-Sidaoshan Fault, which is a high-angle thrust with left-slip component. It lies between the Tibetan plateau and the Alxa block, where substantial elastic strain has accumulated due to the northeastward extrusion of the plateau, leading to occurrences of several earthquakes greater than MS5.0 in the history. Our electrical structure derived from the MT survey supports the following tectonic interpretations:The Tibetan plateau expands to the northeast in a flower-like style while the Alxa block subducts to southwest in a listric-shaped manner, which forms the northeastward growth pattern of the Tibetan plateau. The forefront of the plateau expansion is around the Hongyashan-Sidaoshan Fault, indicating that the extension of the plateau has surpassed the Hexi Corridor to the southern margin of the Alxa block. The deformation nearby the Hongyashan-Sidaoshan Fault could be linked to the northeastward propagating extrusion of the Tibetan plateau as a far-field dynamic effect of the India-Eurasia collision. The Tibetan plateau is continuing to grow northeastward, resulting in folds and thrusts in the Hexi Corridor, and even farther to the southern margin of the Alxa block.  相似文献   

3.
With the continuous collision of the India and Eurasia plate in Cenozoic, the Qilian Shan began to uplift strongly from 12Ma to 10Ma. Nowadays, Qilian Shan is still uplifting and expanding. In the northern part of Qilian Shan, tectonic activity extends to Hexi Corridor Basin, and has affected Alashan area. In the southern part of Qilian Shan, tectonic activity extends to Qaidam Basin, forming a series of thrust faults in the northern margin of Qaidam Basin and a series of fold deformations in the basin. The southern Zongwulong Shan Fault is located in the northeastern margin of Qaidam Basin, it is the boundary thrust fault between the southern margin of Qilian Shan and Qaidam Basin. GPS studies show that the total crustal shortening rate across the Qilian Shan is 5~8mm/a, which absorbs 20% of the convergence rate of the Indian-Eurasian plate. Concerning how the strain is distributed on individual fault in the Qilian Shan, previous studies mainly focused on the northern margin of the Qilian Shan and the Hexi Corridor Basin, while the study on the southern margin of the Qilian Shan was relatively weak. Therefore, the study of late Quaternary activity of southern Zongwulong Shan Fault in southern margin of Qilian Shan is of great significance to understand the strain distribution pattern in Qilian Shan and the propagation of the fault to the interior of Qaidam Basin. At the same time, because of the strong tectonic activity, the northern margin of Qaidam Basin is also a seismic-prone area. Determining the fault slip rate is also helpful to better understand the movement behaviors of faults and seismic risk assessment.Through remote sensing image interpretation and field geological survey, combined with GPS topographic profiling, cosmogenic nuclides and optically stimulated luminescence dating, we carried out a detailed study at Baijingtu site and Xujixiang site on the southern Zongwulong Shan Fault. The results show that the southern Zongwulong Shan Fault is a Holocene reverse fault, which faulted a series of piedmont alluvial fans and formed a series of fault scarps.The 43ka, 20ka and 11ka ages of the alluvial fan surfaces in this area can be well compared with the ages of terraces and alluvial fan surfaces in the northeastern margin of Tibetan Plateau, and its formation is mainly controlled by climatic factors. Based on the vertical dislocations of the alluvial fans in different periods in Baijingtu and Xujixiang areas, the average vertical slip rate of the southern Zongwulong Shan Fault since late Quaternary is(0.41±0.05)mm/a, and the average horizontal shortening rate is 0.47~0.80mm/a, accounting for about 10% of the crustal shortening in Qilian Shan. These results are helpful to further understand the strain distribution model in Qilian Shan and the tectonic deformation mechanism in the northern margin of Qaidam Basin. The deformation mechanism of the northern Qaidam Basin fault zone, which is composed of the southern Zongwulong Shan Fault, is rather complicated, and it is not a simple piggy-back thrusting style. These faults jointly control the tectonic activity characteristics of the northern Qaidam Basin.  相似文献   

4.

Late Cenozoic sediments in the Hexi Corridor, foreland depression of the Qilian Mountain preserved reliable records on the evolution of the Northern Tibetan Plateau. Detailed magnetic polarity dating on a 1150 m section at Wenshushan anticline in the Jiudong Basin, west of Hexi Corridor finds that the ages of the Getanggou Formation, Niugetao Formation and Yumen Conglomerate are >11-8.6 Ma, 8.6-4.5 Ma and 4.5-0.9 Ma respectively. Accompanying sedimentary analysis on the same section suggests that the northern Tibetan Plateau might begin gradual uplift since 8.6-7.6 Ma, earlier than the northeastern Tibetan Plateau but does not suppose that the plateau has reached its maximum elevation at that time. The commencement of the Yumen Conglomerate indicates the intensive tectonic uplift since about 4.5 Ma.

  相似文献   

5.
青藏高原东北缘合作-大井剖面地壳电性结构研究   总被引：14，自引：8，他引：6  
青藏高原东北缘合作-大井剖面的大地电磁探测结果表明,该区域的电性结构呈明显的纵向分层、横向分块的特点,中下地壳普遍存在高导层.青藏高原东北缘西秦岭北缘断裂带、北祁连南缘断裂带、北祁连北缘断裂带(海原断裂带)及龙首山南缘断裂带等区域性断裂带在电性结构模型中均表现为电性梯度带或低阻异常带.电性结构的横向分区与构造上的地块划分有明显的一致性,各个地块的电性结构存在明显差异.西秦岭北缘断裂带作是一个大型的板块边界,但板块结合带附近没有明显逆冲或俯冲痕迹,可能主要以左旋走滑为主.北祁连地块向北仰冲与阿拉善地块向南俯冲边界可能不是海原断裂带,而是龙首山南缘断裂带.西秦岭造山带内的壳内高导层与青藏高原内部存在的高导层具有可对比性,可能是由于部分熔融与含盐水流体共同作用的结果.中祁连地块内的高导层可能是含盐水流体引起的.而北祁连与河西走廊过渡带内的高导层则可能是板块俯冲或仰冲的构造运动痕迹,也可能是由含盐水流体引起的.  相似文献   

6.
Sanwei Shan Fault is located in the north of Tibet, which is a branch of eastern segment of Altyn Tagn fault zone. This fault is distributed along the boundary of fault facet and the Quaternary, with the total length of almost 150km. The fault is a straight-line structure read from the satellite image. Based on the spatial distribution of the fault, three segments are divided, namely, Xishuigou-Dongshuigou segment, Dongshuigou-West Shigongkouzi segment and West Shigongkouzi-Suangta segment, these three segments are distributed by left or right step.Though field microgeomorphology investigation along Sanwei Shan Fault, it has been found that two periods of alluvial-pluvial fans are distributed in front of Sanwei Shan Mountain, most of which are overstepped. Comparing the distribution of alluvial-pluvial fans with their formation age in the surrounding regions, and meanwhile, taking the results of optical stimulated luminescence(OSL) dating, it's considered that the formation age of the older alluvial-pluvial fans, which are distributed in northern Qilian Shan, inside of Hexi Corridor and western Hexi Corridor(including the Sanwei Shan piedmont fans), is between later period of late Quaternary and earlier period of Holocene. The gullies on the older fan and ridges have been cut synchronously. The maximum and minimum sinistral displacement is 5.5m and 1.7m, but majority of the values is between 3.0~4.5m. Taking the results from the OSL dating, we conclude that the minimum sinistral strike-slip rate is(0.33±0.04) mm/a since 14 ka BP and(0.28±0.03) mm/a since 20 ka BP.  相似文献   

7.
The Xigaze fore-arc basin is adjacent to the Indian plate and Eurasia collision zone. Understanding the erosion history of the Xigaze fore-arc basin is significant for realizing the impact of the orogenic belt due to the collision between the Indian plate and the Eurasian plate. The different uplift patterns of the plateau will form different denudation characteristics. If all part of Tibet Plateau uplifted at the same time, the erosion rate of exterior Tibet Plateau will be much larger than the interior plateau due to the active tectonic action, relief, and outflow system at the edge. If the plateau grows from the inside to the outside or from the north to south sides, the strong erosion zone will gradually change along the tectonic active zone that expands to the outward, north, or south sides. Therefore, the different uplift patterns are likely to retain corresponding evidence on the erosion information. The Xigaze fore-arc basin is adjacent to the Yarlung Zangbo suture zone. Its burial, deformation and erosion history during or after the collision between the Indian plate and Eurasia are very important to understand the influence of plateau uplift on erosion. In this study, we use the apatite fission track(AFT)ages and zircon and apatite(U-Th)/He(ZHe and AHe)ages, combined with the published low-temperature thermochronological age to explore the thermal evolution process of the Xigaze fore-arc basin. The samples' elevation is in the range of 3 860~4 070m. All zircon and apatite samples were dated by the external detector method, using low~U mica sheets as external detectors for fission track ages. A Zeiss Axioskop microscope(1 250×, dry)and FT Stage 4.04 system at the Fission Track Laboratory of the University of Waikato in New Zealand were used to carry out fission track counting. We crushed our samples finely, and then used standard heavy liquid and magnetic separation with additional handpicking methods to select zircon and apatite grains. The new results show that the ZHe age of the sample M7-01 is(27.06±2.55)Ma(Table 2), and the corresponding AHe age is(9.25±0.76)Ma. The ZHe and AHe ages are significantly smaller than the stratigraphic age, indicating suffering from annealing reset(Table 3). The fission apatite fission track ages are between(74.1±7.8)Ma and(18.7±2.9)Ma, which are less than the corresponding stratigraphic age. The maximum AFT age is(74.1±7.8)Ma, and the minimum AFT age is(18.7±2.9)Ma. There is a significant north~south difference in the apatite fission track ages of the Xigaze fore-arc basin. The apatite fission track ages of the south part are 74~44Ma, the corresponding exhumation rate is 0.03~0.1km/Ma, and the denudation is less than 2km; the apatite fission track ages of the north part range from 27 to 15Ma and the ablation rate is 0.09~0.29km/Ma, but it lacks the exhumation information of the early Cenozoic. The apatite(U-Th)/He age indicates that the north~south Xigaze fore-arc basin has a consistent exhumation history after 15Ma. The results of low temperature thermochronology show that exhumation histories are different between the northern and southern Xigaze fore-arc basin. From 70 to 60Ma, the southern Xigaze fore-arc basin has been maintained in the depth of 0~6km in the near surface, and has not been eroded or buried beyond this depth. The denudation is less than the north. The low-temperature thermochronological data of the northern part only record the exhumation history after 30Ma because of the young low-temperature thermochronological data. During early Early Miocene, the rapid erosion in the northern part of Xigaze fore-arc basin may be related to the river incision of the paleo-Yarlungzangbo River. The impact of Great Count Thrust on regional erosion is limited. The AHe data shows that the exhumation history of the north-south Xigaze fore-arc basin are consistent after 15Ma. In addition, the low-temperature thermochronological data of the northern Xigaze fore-arc basin constrains geographic range of the Kailas conglomerate during the late Oligocene~Miocene along the Yarlung Zangbo suture zone. The Kailas Basin only develops in the narrow, elongated zone between the fore-arc basin and the Gangdese orogenic belt. The southern part of the Xigaze fore-arc basin has been uplifted from the sea level to the plateau at an altitude of 4.2km, despite the collision of the Indian plate with the Eurasian continent and the late fault activity, but the plateau has been slowly denuded since the early Cenozoic. The rise did not directly contribute to the accelerated erosion in the area, which is inconsistent with the assumption that rapid erosion means that the orogenic belt begins to rise.  相似文献   

8.
史克旭  张瑞青  肖勇 《地球物理学报》1954,63(12):4369-4381
青藏高原东北缘作为高原向外扩张的最前缘地区,代表了高原最新的变形状态,是研究青藏高原变形加厚的关键地区.本文利用"中国地震科学台阵探测"项目在南北地震带北段布设的密集宽频带流动台阵资料,采用虚拟地震测深方法（VDSS）,对青藏高原东北缘及周边地区的地壳厚度进行了研究,以期为研究青藏高原东北向扩展的前缘位置,以及扩展的动力学模式等提供地球物理学依据.波形模拟的结果显示,研究区地壳厚度变化剧烈.其中,祁连和西秦岭地块内地壳厚度存在明显的东西向横向变化,以103°E为界,东部地区为45~50 km,而西部地区地壳已明显增厚,约达到55 km以上.与祁连造山带相邻的阿拉善块体南缘地壳也明显加厚,接近55 km,而阿拉善块体内部地壳厚度约为45~50 km.与其他研究地区相比,鄂尔多斯地块地壳相对要薄,但整体而言,鄂尔多斯地块地壳呈现南北薄（约45 km）、中央厚（约50 km）的形态特征.此外,在六盘山断裂带台站下方观测到复杂的SsPmp震相,推测为双Moho界面结构.结合其他地球物理学证据,我们认为青藏高原东北缘地区地壳增厚方式以均匀缩短增厚为主,且高原向北东扩展的前缘已越过祁连山北缘断裂,进入阿拉善块体南缘地区.  相似文献   

9.
肖卓  高原 《地球物理学报》2017,60(6):2213-2225
利用区域尺度双差层析成像方法,使用2009年1月至2017年2月的近震资料,对青藏高原东北缘及其邻区内记录到的地震事件进行震源位置和三维速度结构的联合反演.重新定位后震源空间位置得到明显改善,浅层的地震波速与地形和沉积层厚度对应较好,研究区地震主要发生在河西走廊过渡带的低泊松比区域.本文将研究区分为五个区域并分别对其层析成像结果进行了讨论,结果显示研究区不同地块之间地壳结构变化明显,地壳物质整体呈酸性,青藏高原东北缘地壳增厚可能主要发生在中下地壳.  相似文献   

10.
Landscape evolution models(LEMs) are essential tools for analyzing tectonic-climate interactions and reproducing landform-shaping processes. In this study we used a LEM to simulate the evolution of the mountains from the central Hexi Corridor in the northeastern Tibetan Plateau, where the climate is arid and the surface processes are relatively uniform. However,there are pronounced differences in the topography between the mountains around the central Hexi Corridor. The East Jintanan Shan, West Jintanan Shan and Heli Shan are located in the northern part of the corridor; and the Yumu Shan in the southern part.Firstly, several representative areas were selected from these mountains to analyze the topographic characteristics, including the uniform valley spacing, local relief, and the outlet number. Secondly, a LEM for these areas was constructed using the Landlab platform, and the landscape evolution was simulated. With uniform valley spacing and other topographic characteristics as the criteria, we compared the realistic and simulated terrain for different model ages. Finally, based on the similarity of the simulated and realistic terrain, we estimated the timing of the initial uplift and the uplift rate of the four mountain ranges. The results are consistent with previous geological and geomorphological records from these youthful stage mountains that have not yet reached a steady state. Our findings demonstrate that LEMs combined with topographic characteristics are a reliable means of constraining the timing of the initial uplift and the uplift rate of the youthful stage mountain. Our approach can potentially be applied to other youthful stage mountains and it may become a valuable tool in tectonic geomorphology research.  相似文献   

11.
The Lenglongling Fault(LLLF) is a major active left-lateral strike-slip fault along the northeastern margin of the Tibetan plateau. Fault slip rate is of great significance for researching the dynamics of tectonic deformation in NE Tibetan plateau and understanding the activity and seismic risk of the fault. However, slip rate of the LLLF, which remains controversial, is limited within~3~24mm/a, a relatively broad range. Taking Niutougou site(37.440 2°N, 102.094 0°E)and Chailong site(37.447 3°N, 102.063 0°E) in the upstream of Talihua gully in Menyuan County, Qinghai Province as the research objects, where faulted landform is typical, we analyzed the displacement evolution model and measured the slip amounts by back-slip of the faulted landform using high-resolution DEM from Terrestrial LiDAR and high-precision satellite images of Google Earth, and by collecting and testing samples from stratigraphic pit excavated in the faulted landform surface and stripping fresh stratigraphic section, we determined the abandonment age of the surface. Holocene slip rate obtained from Niutougou site and Chailong site is(6.4±0.7)mm/a and(6.6±0.3)mm/a, respectively, which have a good consistency. Taking into account the error range of the slip rate, the left-lateral slip rate of the LLLF is(6.6±0.8)mm/a since Holocene, which is between the previons results from geological method, also within the slip rate range of 4.2~8mm/a from InSAR, but slightly larger than that from GPS((4.0±1.0)mm/a). Late Quaternary slip rate of Qilian-Haiyuan fault zone, which displays an arc-shape distribution, turns to be the largest in LLLF region. The most intensive uplift in the LLLF region of the NE Tibetan plateau confirms the important role of the LLLF in accommodating the eastward component of movement of Tibetan plateau relative to the Gobi-Ala Shan block from one side.  相似文献   

12.
长波长、低起伏度大凉山构造带新生代隆升剥露与建造过程是解译青藏高原东向扩展过程的关键核心地区之一.本文基于大凉山构造带喜德剖面和沐川剖面9件样品的多封闭系统低温热年代学年龄(即磷灰石(U-Th)/He(AHe)、磷灰石裂变径迹(AFT)和锆石(U-Th)/He(ZHe))定年,揭示出多封闭系统热年代学年龄与古岩性柱深度具有明显的正相关性,即伴随古岩性柱深度增大,多封闭系统热年代学年龄明显减小.喜徳剖面多封闭系统低温热年代学AHe、AFT和ZHe年龄值分别为7—9Ma、14—22Ma和25—38Ma;沐川剖面多封闭系统低温热年代学AHe和AFT年龄值分别为10—26Ma、23—85Ma,ZHe年龄值为未完全退火年龄.多封闭系统热年代学和QTQt热史模拟揭示,大凉山构造带喜徳和沐川剖面岩性柱所有样品都经历大致相似的三阶段热演化过程,尤其是晚新生代快速隆升剥露阶段(30—20 Ma以来),其平均剥露速率分别为~0.15mm·a-1和~0.20mm·a-1,抬升剥露量分别为~3.0km和~1.5km.结合区域低温热年代学特征的大凉山构造带地表隆升动力学模型,揭示出重力均衡作用下地壳缩短与剥露作用(即构造隆升剥露机制)控制形成了现今大凉山造山带长波长、低起伏和高海拔地貌建造过程.  相似文献   

13.
本文通过背斜褶皱变形与低温热年代学年龄(磷灰石和锆石(U-Th)/He、磷灰石裂变径迹)端元模型研究,约束低起伏度、低斜率地貌特征的四川盆地南部地区新生代隆升剥露过程.四川盆地南部沐川和桑木场背斜地区新生代渐新世-中新世发生了相似的快速隆升剥露过程(速率为~0.1 mm/a、现今地表剥蚀厚度1.0~2.0 km),反映出盆地克拉通基底对区域均一性快速抬升冷却过程的控制作用.川南沐川地区磷灰石(U-Th)/He年龄值为~10-28.6 Ma, 样品年龄与古深度具有明显的线性关系,揭示新生代~10-30 Ma以速率为0.12±0.02 mm/a的稳态隆升剥露过程.桑木场背斜地区磷灰石裂变径迹年龄为~36-52 Ma,古深度空间上样品AFT年龄变化不明显(~50 Ma)、且具有相似的径迹长度(~12.0 μm).磷灰石裂变径迹热演化史模拟表明桑木场地区经历三个阶段热演化过程:埋深增温阶段(~80 Ma以前)、缓慢抬升冷却阶段(80-20 Ma)和快速隆升剥露阶段(~20 Ma-现今),新生代隆升剥露速率大致分别为~0.025 mm/a和~0.1 mm/a.新生代青藏高原大规模地壳物质东向运动与四川盆地克拉通基底挤压,受板缘边界主断裂带差异性构造特征控制造就了青藏高原东缘不同的边界地貌特征.  相似文献   

14.
地震活动反映的青藏高原东北地区现代构造运动特征   总被引：16，自引：1，他引：15       下载免费PDF全文
用地震活动资料研究了青藏高原东北地区的现代构造运动特征．地震活动证据表明,青藏高原东北地区活动块体之间是以复杂的变形带接触的．甘-青地块与阿拉善地块之间有一个宽阔的挤压变形带,该挤压带东南端转变为以网络状水平剪切变形为主．甘-青地块与鄂尔多斯地块接触的六盘山地区处于NE-SW向的挤压变形之中．鄂尔多斯地块与阿拉善地块间有一个具有拐折结构的剪切变形带,鄂尔多斯地块的西北角和东南缘处于NNW-SSE方向的受拉伸状态．该区现代构造变形特征可能与青藏高原向东北的挤压作用、鄂尔多斯地块的阻挡作用以及高原物质向东南方向挤出运动有关．   相似文献   

15.
The northeastern margin of Tibetan plateau is an active block controlled by the eastern Kunlun fault zone, the Qilian Shan-Haiyuan fault zone, and the Altyn Tagh fault zone. It is the frontier and the sensitive area of neotectonic activity since the Cenozoic. There are widespread folds, thrust faults and stike-slip faults in the northeastern Tibetan plateau produced by the intensive tectonic deformation, indicating that this area is suffering the crustal shortening, left-lateral shear and vertical uplift. The Riyueshan Fault is one of the major faults in the dextral strike-slip faults systems, which lies between the two major large-scale left-lateral strike-slip faults, the Qilian-Haiyuan Fault and the eastern Kunlun Fault. In the process of growing and expanding of the entire Tibetan plateau, the dextral strike-slip faults play an important role in regulating the deformation and transformation between the secondary blocks. In the early Quaternary, because of the northeastward expansion of the northeastern Tibetan plateau, tectonic deformations such as NE-direction extrusion shortening, clockwise rotation, and SEE-direction extrusion occurred in the northeastern margin of the Tibetan plateau, which lead to the left-lateral slip movement of the NWW-trending major regional boundary faults. As the result, the NNW-trending faults which lie between these NWW direction faults are developed. The main geomorphic units developed within the research area are controlled by the Riyueshan Fault, formed due to the northeastward motion of the Tibet block. These geomorphic units could be classified as:Qinghai Lake Basin, Haiyan Basin, Datonghe Basin, Dezhou Basin, and the mountains developed between the basins such as the Datongshan and the Riyueshan. Paleo basins, alluvial fans, multiple levels of terraces are developed at mountain fronts. The climate variation caused the formation of the geomorphic units during the expansion period of the lakes within the northeastern Tibetan plateau. There are two levels of alluvial fans and three levels of fluvial terrace developed in the study area, the sediments of the alluvial fans and fluvial terraces formed by different sources are developed in the same period. The Riyueshan Fault connects with the NNW-trending left-lateral strike-slip north marginal Tuoleshan fault in the north, and obliquely connects with the Lajishan thrust fault in the south. The fault extends for about 180km from north to south, passing through Datonghe, Reshui coal mine, Chaka River, Tuole, Ketu and Xicha, and connecting with the Lajishan thrusts near the Kesuer Basin. The Riyueshan Fault consists of five discontinuous right-step en-echelon sub-fault segments, with a spacing of 2~3km, and pull-apart basins are formed in the stepovers. The Riyueshan Fault is a secondary fault located in the Qaidam-Qilian active block which is controlled by the major boundary faults, such as the East Kunlun Fault and the Qilian-Haiyuan Fault. Its activity characteristics provide information of the outward expansion of the northeastern margin of Tibet. Tectonic landforms are developed along the Riyueshan Fault. Focusing on the distinct geomorphic deformation since late Pleistocene, the paper obtains the vertical displacement along the fault strike by RTK measurement method. Based on the fault growth-linkage theory, the evolution of the Riyueshan Fault and the related kinetic background are discussed. The following three conclusions are obtained:1)According to the characteristics of development of the three-stage 200km-long steep fault scarp developed in the landforms of the late Pleistocene alluvial fans and terraces, the Riyueshan Fault is divided into five segments, with the most important segment located in the third stepover(CD-3); 2)The three-stage displacement distribution pattern of the Riyueshan Fault reveals that the fault was formed by the growths and connections of multiple secondary faults and is in the second stage of fault growth and connection. With CD-3 as the boundary, the faults on the NW side continue to grow and connect; the fault activity time on the SE side is shorter, and the activity intensity is weaker; 3)The extreme value of the fault displacement distribution curve indicates the location of strain concentration and stress accumulation. With the stepover CD-3 as the boundary, the stress and strain on NW side are mainly concentrated in the middle and fault stepovers. The long-term accumulation range of stress on the SE side is relatively dispersed. The stress state may be related to the counterclockwise rotation inside the block under the compression of regional tectonic stress.  相似文献   

16.
鲜水河断裂是青藏高原东南缘的一条北西向大型左旋走滑断裂,其南东段逐渐向南偏转,并与近南北向的安宁河断裂相接,在两个断裂相接处西侧耸立着海拔7556 m高的贡嘎山.磷灰石裂变径迹(AFT)测试可知,贡嘎山及其邻区12个样品的年龄分布在0.2±0.1 Ma~2.7±0.7 Ma之间,平均径迹长度在13.64~15.19 μm之间,表明贡嘎山及其邻区第四纪时期一直处于快速剥蚀状态.结合前人在此地区的低温热年代研究成果,揭示出两个现象:(1)贡嘎山岩体及鲜水河断裂与龙门山断裂所夹的三角区域为快速隆升区域,而其西侧、北侧的高原腹地的隆升速率远低于这两个区域;(2)贡嘎山岩体从北向南隆升速率逐渐变大,其最南端1 Ma以来的隆升速率超过3.3±0.8 mm/a.这些现象表明青藏高原在整体横向挤出、缓慢隆升的基础上,还存在着一些特殊的局部快速隆升区域.通过对川滇地块水平运动的矢量分解,我们认为贡嘎山花岗岩体是鲜水河断裂至安宁河断裂间挤压弯曲段吸收、转换川滇地块南东向水平运动导致局部快速隆升的产物,在这一过程中,由于垂直于断裂的挤压分量从北到南逐渐增大,导致了岩体从北往南的隆升速率逐渐增大.  相似文献   

17.

Sediments shed from the northern margin of the Tibetan Plateau, the Qilian Mountains, are widely deposited in the foreland basin, the Jiuxi Basin, archiving plenty of information about the mountain surface uplift and erosion history. The Laojunmiao section, 1960 m thick, representing the upper sequence of the Cenozoic basin sediments, is paleomagnetically dated to about 13-0 Ma BP. Detailed sedimentary study of this sequence has revealed five sedimentary facies associations which determine four stages of sedimentary environment evolution. They are: (I) the half-deep lake system before 12.18 Ma BP, (II) the shallow lake system between 12.18 and 8.26 Ma BP, (III) the fan delta dominated sedimentary system in dry climate between 8.26 and 6.57 Ma BP, and (IV) alluvial fan system since 6.57 Ma BP. The associated mountain erosion and uplift are suggested to have experienced three phases, that is, tectonic stable (13-8.26 Ma BP), gradual uplift (8.26-<4.96 Ma BP), and rapid intermittent uplift (>3.66-0 Ma BP). The uplift at ∼3.66 Ma BP is of great importance in tectonics and geomorphology. Since then, tectonic uplift and mountain building have been accelerated and become strong intermittent. At least three significant tectonic events took place with ages at <1.80-1.23, 0.93-0.84 and 0.14 Ma BP, respectively. Thus, the uplift of the northern Tibetan Plateau is a complex process of multiple phases, unequal speed and irregular movements.

  相似文献   

18.
The geomorphologic structure in the southeastern Tibetan Plateau is one of the important indexes for the expansion and deep dynamic process of Tibet. There are two different understandings for the geomorphologic structure in the southeastern Tibetan Plateau, i.e. gradual change and abrupt change. The gradient model suggests a gradual topographic reduction towards southeast which is an important evidence for the lower crust channel flow. The abrupt model considers that the southeast boundary of the plateau shows an abrupt change of topography in a zone of 50~200km wide which is controlled by the Yarlung-Yulong fault system. Here, we describe the morphotectonic feature in detail of the Sichuan-Yunnan block on the southeast edge of the plateau through the digital elevation model(DEM)analysis, further review the structural controls on the geomorphologic structure by combining the tectono-thermochronology analysis, and evaluate the southeastward spreading mode of the plateau. The topographic arithmetic progression ranking by using the DEM of the Sichuan-Yunnan block reveals three geomorphologic steps gradually lowering from the northwest to southeast. The switching of hypsometric integral(HI)value and the anomaly of SL/K value(where SL is stream length-gradient index and K is altitude of the profile)of river systems all occur on the edge of terraces. The high terrace is located on the north of Muli-Yulong with average elevation~4 200m; the secondary level of terrace extends to the Yanyuan-Lijiang area with average elevation~3 000m; and the third level is the region between the Jinhe-Qinghe and Anninghe with average elevation~1 800m. Structure investigation reveals that all the topographic boundaries between different terraces are consistent with regional major faults. The Muli thrust fault and Yulong thrust fault control the southeast edge of the high terrace, the Jinhe-Qinghe thrust fault separates the second and third level of terrace. The coincidence between topography boundaries and faults suggests that the formation of the stepped geomorphology on the southeast edge of the plateau were induced by the fault activities, reflecting the fault-controlled southeastward stepped-expanding mode of the plateau. The fission-track(FT)dating of the granites at the hanging wall of the Yuling-Muli Fault reveals fast uplift during~27~22Ma BP, reflecting the major thrusting along the Yulong-Muli Fault, which is consistent with the early-stage activity (~30~25Ma BP) of the Longmenshan Fault. Therefore, the high terrace was formed during the Oligocene to early Miocene with the thrusting of the Yulong-Muli Fault. Tectono-thermochronology analysis also reveals the major thrusting of the Jinhe-Qinghe Fault occurred during~18~11Ma BP, indicating the middle terrace was formed in the middle Miocene, which also could correspond to the middle Miocene(~15~10Ma BP) activity of the Longmenshan Fault. Therefore, the thrusting faults controlled stepped terrace geomorphologic structure and the stepwise expanding mode under combined movements of large-scale thrusts and strike-slip faults at the southeast edge of Tibetan Plateau during the late Cenozoic do not support the lower crust channel flow model.  相似文献   

19.
库木库里盆地位于青藏高原北缘,与柴达木盆地一山之隔,是二者的过渡地带,也是高原主体部分向NE扩展的前缘地区;现今构造表现为被3条大型活动构造带(走滑的阿尔金断裂带、东昆仑断裂带和逆冲的祁漫塔格褶皱逆冲系)所夹持。因此,该盆地对于研究青藏高原北缘的构造活动性、活动历史,探讨高原的扩展模式具有十分重要的意义。虽然库木库里盆地南、北两侧均发育活动性很强的大型走滑断裂,但是在盆地中央发育1条大型背斜,走向NWW-SEE,与祁漫塔格褶皱逆冲系和柴达木盆地内的褶皱构造走向一致,说明盆地目前遭受NNE向的挤压。通过对盆地地形横、纵剖面和阶地展布形态的分析,得出背斜有自西向东扩展变形的特征;野外调查和测年结果显示,背斜东段冰川融水形成了大型冰水扇,形成年龄为(87.09±2.31)~(102.4±3.7)ka,进而获得背斜东段自晚更新世以来平均隆升速率的最大值为(2.78±0.28)~(3.28±0.28)mm/a。库木库里盆地整体的活动性很强,在构造上与其北边的柴达木盆地类似,都受控于阿尔金断裂南侧的NNE向的区域挤压作用。  相似文献   

20.
青藏高原东北缘由于受到多个构造块体的共同约束,表现出复杂的地球物理特性和地质特性,本文利用甘肃数字地震台网(2001-2008年)的观测资料,采用系统分析方法(SAM),进行地壳剪切波分裂分析,获得研究区内18个台站共1005条记录的剪切波分裂参数.研究结果表明,青藏高原东北缘介质各向异性在空间上存在差异,慢剪切波延迟时间表明了地壳介质各向异性的强弱变化特征,快剪切波平均偏振方向则反映了本区区域构造应力的空间变化特征.分析认为,祁连山-河西走廊活动构造区直接受青藏地块与阿拉善地块间相互作用,与青藏地块构造应力一致;甘东南活动构造区的应力环境主要受到内部活动断裂的共同作用,具有局部构造应力的特征.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号