首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
A MS8.0 earthquake occurred in Wenchuan County, Sichuan Province, China, on May 12, 2008, and subsequently, numerous aftershocks followed. We obtained the moment tensor solutions and source time functions (STFs) for the Wenchuan earthquake and its seven larger aftershocks (MS5.0~6.0) by a new technique of moment tensor inversion using the broadband and long-period seismic waveform data from the Global Seismic Network (GSN). Firstly, the theoretical background and technical flow of the new technique was briefly introduced, and an aftershock of the Wenchuan earthquake sequence was employed to illustrate the real procedure for inverting the moment tensor; secondly, the moment tensor solutions and STFs of the eight events, including the main shock, were presented, and finally, the interpretation of the results was made. The agreement of our results with the GCMT results indicates the new approach is efficient and feasible. By using this approach, not only the moment tensor solution can be obtained but also the STF can be retrieved; the inverted STFs indicate that the source rupture process may be com-plicated even for the moderate earthquakes. The inverted focal mechanisms of the Wenchuan earthquake sequence show that the most of the aftershocks occurred in the main faults of the Longmenshan fault zone with predomi-nantly thrustingwith minor right-lateral strike-slip component, but some of them may have occurred in the sub-faults with strike-slip faulting in the vicinity of the main faults.  相似文献   

2.
We conducted moment tensor inversion and studied source rupture process for M S=7.9 earthquake occurred in the border area of China, Russia and Mongolia on September 27 2003, by using digital teleseismic P-wave seismograms recorded by long-period seismograph stations of the global seismic network. Considering the aftershock distribution and the tectonic settings around the epicentral area, we propose that the M S=7.9 earthquake occurred on a fault plane with the strike of 127°, the dip of 79° and the rake of 171°. The rupture process inversion result of M S=7.9 earthquake shows that the total rupture duration is about 37 s, the scalar moment tensor is M 0=0.97×1020 N·m. Rupture mainly occurred on the shallow area with 110 km long and 30 km wide, the location in which the rupture initiated is not where the main rupture took place, and the area with slip greater than 0.5 m basically lies within 35 km deep middle-crust under the earth surface. The maximum static slip is 3.6 m. There are two distinct areas with slip larger than 2.0 m. We noticed that when the rupture propagated towards northwest and closed to the area around the M S=7.3 hypocenter, the slip decreased rapidly, which may indicate that the rupture process was stopped by barriers. The consistence of spatial distribution of slip on the fault plane with the distribution of aftershocks also supports that the rupture is a heterogeneous process owing to the presence of barriers.  相似文献   

3.
The 2014 Kefalonia earthquake sequence started on 26 January with the first main shock (MW6.1) and aftershock activity extending over 35 km, much longer than expected from the causative fault segment. The second main shock (MW6.0) occurred on 3 February on an adjacent fault segment, where the aftershock distribution was remarkably sparse, evidently encouraged by stress transfer of the first main shock. The aftershocks from the regional catalog were relocated using a 7-layer velocity model and station residuals, and their distribution evidenced two adjacent fault segments striking almost N-S and dipping to the east, in full agreement with the centroid moment tensor solutions, constituting segments of the Kefalonia Transform Fault (KTF). The KTF is bounded to the north by oblique parallel smaller fault segments, linking KTF with its northward continuation, the Lefkada Fault.  相似文献   

4.
We propose a method that employs the squared displacement integral (ID2) to estimate earthquake magnitudes in real time for use in earthquake early warning (EEW) systems. Moreover, using τ c and P d for comparison, we establish formulas for estimating the moment magnitudes of these three parameters based on the selected aftershocks (4.0 ≤ M s  ≤ 6.5) of the 2008 Wenchuan earthquake. In this comparison, the proposed ID2 method displays the highest accuracy. Furthermore, we investigate the applicability of the initial parameters to large earthquakes by estimating the magnitude of the Wenchuan M s 8.0 mainshock using a 3-s time window. Although these three parameters all display problems with saturation, the proposed ID2 parameter is relatively accurate. The evolutionary estimation of ID2 as a function of the time window shows that the estimation equation established with ID2 Ref determined from the first 8-s of P wave data can be directly applicable to predicate the magnitudes of 8.0. Therefore, the proposed ID2 parameter provides a robust estimator of earthquake moment magnitudes and can be used for EEW purposes.  相似文献   

5.
The relation between the gravity variation features and M S=8.1 earthquake in Qinghai-Xizang monitoring area is analyzed preliminarily, by using spatial dynamic variation results of regional gravity field from absolute gravity and relative gravity observation in 1998 and 2000. The results show that: 1) M S=8.1 earthquake in Kulun mountain pass western occurred in the gravity variation high gradient near gravity’s high negative variation; 2) The main tectonic deformation and energy accumulation before M S=8.1 earthquake are distributed at south side of the epicenter; 3) The range of gravity’s high negative variation at east of the M S=8.1 earthquake epicenter relatively coincides with that rupture region according to field geology investigation; 4) Gravity variation distribution in high negative value region is just consistent with the second shear strain’s high value region of strain field obtained from GPS observation.  相似文献   

6.
A MS8.0 earthquake occurred in Wenchuan County, Sichuan Province, China, on May 12, 2008, and subsequently, numerous aftershocks followed. We obtained the moment tensor solutions and source time functions (STFs) for the Wenchuan earthquake and its seven larger aftershocks (MS5.0~6.0) by a new technique of moment tensor inversion using the broadband and long-period seismic waveform data from the Global Seismic Network (GSN). Firstly, the theoretical background and technical flow of the new technique was brie...  相似文献   

7.
In this paper changes in focal mechanisms, parameters of wave spectra, and stress drops for the M S=5.0 foreshock and M S=6.0 mainshock in February 2001 in Yajiang County, Sichuan, and seismicity in epicentral region are studied. Comparison of focal mechanisms for the Yajiang earthquakes with distribution patterns of aftershocks, the nodal plane I, striking in the direction of NEN, of the Yajiang M=5.0 event is chosen as the faulting plane; the nodal plane II, striking in the direction of WNW, of the M=6.0 event as the faulting plane. The strikes of the two faulting planes are nearly perpendicular to each other. The level of stress drops in the epicentral region before the occurrence of the M=6.0 earthquake increases, which is consistent with increase of seismicity in the epicentral region. The rate decay of the Yajiang earthquake sequence, changes in wave spectra for foreshocks and aftershocks, and focal mechanisms are complex.  相似文献   

8.
On August 8, 2017, a M7.0 earthquake occurred in Jiuzhaigou County, Sichuan Province, China, resulting in significant casualties and property damage. Therefore, it is critical to identify the areas of potential aftershocks before reconstruction and re-settling people to avoid future disasters. Based on the elastic dislocation theory and a multi-layered lithospheric model, we calculate the Coulomb failure stress changes caused by the Wenchuan and Jiuzhaigou earthquakes, discuss the relationship between the Mw7.9 Wenchuan and M7.0 Jiuzhaigou earthquakes, and analyze the influence of the aftershock distribution and stress changes on the major faults in this region caused by the Jiuzhaigou earthquake. The co- and post-seismic stress changes caused by the Wenchuan earthquake significantly increased the stress accumulation at the hypocenter of the Jiuzhaigou earthquake. Therefore, the occurrence of the Jiuzhaigou earthquake was probably stimulated by the Wenchuan earthquake. The aftershock distribution is well explained by the co-seismic stress changes of the Jiuzhaigou earthquake. The stress accumulation and corresponding seismic hazard on the Maqu-Heye segment of the East Kunlun fault and the northern extremity of the Huya fault has been further increased by the Jiuzhaigou earthquake.  相似文献   

9.
To study the seismogeny process or the precursory behavior of the 1976 M S=7.0 Lijiang earthquake, we analyze the repeat gravity data with high precision from the Western Yunnan Earthquake Prediction Experiment Area (WYEPEA) and the related results of geology and geophysics survey in this paper. Considering the gross errors caused by observation data and model difference, we have firstly inverted the slip distribution of the main active faults with time based on the robust Bayesian least squares estimation and multi-fault dislocation model. The results show that the slip changes of the faults with time from 1990 to 1997 obviously reflect the preparation process of the Lijiang earthquake. The images of main precursor mode have the characteristic of main shock-after shock type, which is agreement to the model of coupling movement between crust density and crust deformation (DD mode of coupling movement).  相似文献   

10.
The seismogenic fault and the dynamic mechanism of the Ning’er, Yunnan Province MS6.4 earthquake of June 3, 2007 are studied on the basis of the observation data of the surface fissures, sand blow and water eruption, landslide and collapse associated with the earthquake, incorporating with the data of geologic structures, focal mechanism solutions and aftershock distribution for the earthquake area. The observation of the surface fissures reveals that the Banhai segment of the NW-trending Ning’er fault is dominated by right-lateral strike-slip, while the NNE-trending fault is dominated by left-lateral strike-slip. The seismo-geologic hazards are concentrated mainly within a 330°-extending zone of 13.5 km in length and 4 km in width. The major axis of the isoseismal is also oriented in 330° direction, and the major axis of the seismic intensity VIII area is 13.5 km long. The focal mechanism solutions indicate that the NW-trending nodal plane of the Ning’er MS6.4 earthquake is dominated by right-lateral slip, while the NE-trending nodal plane is dominated by left-lateral slip. The preferred distribution orientation of the aftershocks of MS≥2 is 330°, and the focal depths are within the range of 3～12 km, predominantly within 3～10 km. The distribution of the aftershocks is consistent with the distribution zone of the seismo-geologic hazards. All the above-mentioned data indicate that the Banhai segment of the Ning’er fault is the seismogenic fault of this earthquake. Moreover, the driving force of the Ning’er earthquake is discussed in the light of the active block theory. It is believed that the northward pushing of the Indian plate has caused the eastward slipping of the Qinghai-Tibetan Plateau, which has been transformed into the southeastern-southernward squeezing of the southwest Yunnan region. As a result, the NW-trending faults in the vicinity of the Ning’er area are dominated by right-lateral strike-slip, while the NE-trending faults are dominated by left-lateral strike-slip. This tectonic framework might be the main cause of the frequent occurrence of MS6.0～6.9 earthquakes in the area.  相似文献   

11.
The spatio-temporal slip distribution of the earthquake that occurred on 8 August 2017 in Jiuzhaigou, China, was estimated from the teleseismic body wave and near-field Global Navigation Satellite System (GNSS) data (coseismic displacements and high-rate GPS data) based on a finite fault model. Compared with the inversion results from the teleseismic body waves, the near-field GNSS data can better restrain the rupture area, the maximum slip, the source time function, and the surface rupture. The results show that the maximum slip of the earthquake approaches 1.4 m, the scalar seismic moment is ~ 8.0 × 1018 N·m (Mw?≈?6.5), and the centroid depth is ~ 15 km. The slip is mainly driven by the left-lateral strike-slip and it is initially inferred that the seismogenic fault occurs in the south branch of the Tazang fault or an undetectable fault, a NW-trending left-lateral strike-slip fault, and belongs to one of the tail structures at the easternmost end of the eastern Kunlun fault zone. The earthquake rupture is mainly concentrated at depths of 5–15 km, which results in the complete rupture of the seismic gap left by the previous four earthquakes with magnitudes >?6.0 in 1973 and 1976. Therefore, the possibility of a strong aftershock on the Huya fault is low. The source duration is ~ 30 s and there are two major ruptures. The main rupture occurs in the first 10 s, 4 s after the earthquake; the second rupture peak arrives in ~ 17 s. In addition, the Coulomb stress study shows that the epicenter of the earthquake is located in the area where the static Coulomb stress change increased because of the 12 May 2017 Mw7.9 Wenchuan, China, earthquake. Therefore, the Wenchuan earthquake promoted the occurrence of the 8 August 2017 Jiuzhaigou earthquake.  相似文献   

12.
More than 1000 aftershocks were recorded within a month after the occurrence of the ML 5.5, 5 August 2014 Orkney earthquake. The events were relocated using the double difference method as part of an effort to identify the fault which might be the source of the events. A north–south trend of seismicity was revealed by the relocated events, with a diffuse cluster to the north of the main event. A depth profile shows these two clusters: one at a depth of about 2 km to the north of the main event and the other at depth between 3 and 6 km south of the main event. Focal mechanism solutions of 18 aftershocks were determined using first motion polarities from seismic stations of the Council for Geoscience cluster networks. Stress inversion analysis results from the focal mechanism solutions show a dominant extensional stress field in the region; the main event had a strike-slip fault plane solution. This is consistent with the regional stress field which is predominantly related to the East African rift system. It is possible that the occurrence of the main event triggered seismicity on shallower faults within the mining horizons oriented in a different direction to the fault on which the main event occurred. The area has a complex heterogeneous faulting structure as indicated by the observed low p values and complex focal mechanism solutions.  相似文献   

13.
A new 3D velocity model of the crust and upper mantle in the southeastern (SE) margin of the Tibetan plateau was obtained by joint inversion of body- and surface-wave data. For the body-wave data, we used 7190 events recorded by 102 stations in the SE margin of the Tibetan plateau. The surface-wave data consist of Rayleigh wave phase velocity dispersion curves obtained from ambient noise cross-correlation analysis recorded by a dense array in the SE margin of the Tibetan plateau. The joint inversion clearly improves the v S model because it is constrained by both data types. The results show that at around 10 km depth there are two low-velocity anomalies embedded within three high-velocity bodies along the Longmenshan fault system. These high-velocity bodies correspond well with the Precambrian massifs, and the two located to the northeast of 2013 M S 7.0 Lushan earthquake are associated with high fault slip areas during the 2008 Wenchuan earthquake. The aftershock gap between 2013 Lushan earthquake and 2008 Wenchuan earthquake is associated with low-velocity anomalies, which also acts as a barrier zone for ruptures of two earthquakes. Generally large earthquakes (M ≥ 5) in the region occurring from 2008 to 2015 are located around the high-velocity zones, indicating that they may act as asperities for these large earthquakes. Joint inversion results also clearly show that there exist low-velocity or weak zones in the mid-lower crust, which are not evenly distributed beneath the SE margin of Tibetan plateau.  相似文献   

14.
In this paper, observation data in 25 GPS reference stations of China have been analyzed by calculating GPS position coordinate time-series with GIPSY. Result shows there is an obvious trend variation in such time-series. The trend variations of time series along the longitude and latitude coordinate reflect the motion of each position in the global-plate, in which the trend variation in the vertical direction reveals some large-scale construction information or reflects the local movement around the positions. The analysis also shows that such time-series have a variation cycle of nearly 1.02 a, but the reason still remains to be further studied. At the end of this paper, response of the time-series of M S=8.1 Kunlunshan earthquake was analyzed, and the seismogenic process of M S=8.1 Kunlunshan earthquake, according to the time proceeding and the feature of anomaly, was divided into 3 phases—changes in blocks with forces, strain accumulation, quick accumulation and slow release of energy. At the initial stage of seismogenic process of M S=8.1 earthquake and at the imminent earthquake, coseismic process as well as during the post earthquake recovery, anomaly in vertical direction is always in a majority. The anomalous movement in vertical direction at the initial stage resulted in a blocking between faults, while at the middle stage of seismogenic process, the differential movement between blocks are in a majority, which is the major reason causing energy accumulating at the blocking stage of faults.  相似文献   

15.
A great earthquake of M S=8.1 took place in the west of Kunlun Pass on November 14, 2001. The epicenter is located at 36.2°N and 90.9°E. The analysis shows that some main precursory seismic patterns appear before the great earthquake, e.g., seismic gap, seismic band, increased activity, seismicity quiet and swarm activity. The evolution of the seismic patterns before the earthquake of M S=8.1 exhibits a course very similar to that found for earthquake cases with M S≥7. The difference is that anomalous seismicity before the earthquake of M S=8.1 involves in the larger area coverage and higher seismic magnitude. This provides an evidence for recognizing precursor and forecasting of very large earthquake. Finally, we review the rough prediction of the great earthquake and discuss some problems related to the prediction of great earthquakes.  相似文献   

16.
The paper considers the Argun earthquake of July 22, 2011 (M w = 4.5), which occurred in the Argun River valley in a low-seismicity territory in China. The focal parameters of the earthquake (depth of the hypocenter, moment magnitude, scalar seismic moment, and focal mechanism) were determined by calculating the seismic moment tensor from the amplitude spectra of surface waves and the data on the signs of the first arrivals of body waves at regional stations. The solution of the focal mechanism makes it possible to assume a relationship between the earthquake focus and a fault with a northeastern strike bordering the southeastern side of the Argun Basin (in Chinese territory). The Argun earthquake was felt in Russia with an intensity of II–III to V at the epicentral distances up to 255 km. The intensity of shaking did not exceed values suggested by new GSZ-2012 and GSZ-2014 seismic zoning maps of Russian territory. Nevertheless, the question on the possible occurrence of stronger earthquakes in the studied region remains open.  相似文献   

17.
Field investigations and analyses of satellite images and aerial photographs reveal that the 2016 M w 7.1 (Mj 7.3) Kumamoto earthquake produced a ～40-km surface rupture zone striking NE-SW on central Kyushu Island, Japan. Coseismic surface ruptures were characterized by shear faults, extensional cracks, and mole tracks, which mostly occurred along the pre-existing NE-SW-striking Hinagu–Futagawa fault zone in the southwest and central segments, and newly identified faults in the northeast segment. This study shows that (i) the Hinagu–Futagawa fault zone triggered the 2016 Kumamoto earthquake and controlled the spatial distribution of coseismic surface ruptures; (ii) the southwest and central segments were dominated by right-lateral strike-slip movement with a maximum in-site measured displacement of up to 2.5 m, accompanied by a minor vertical component. In contrast, the northeast segment was dominated by normal faulting with a maximum vertical offset of up to 1.75 m with a minor horizontal component that formed graben structures inside Aso caldera; (iii) coseismic rupturing initiated at the jog area between the Hinagu and Futagawa faults, then propagated northeastward into Aso caldera, where it terminated. The 2016 M w 7.1 Kumamoto earthquake therefore offers a rare opportunity to study the relationships between coseismic rupture processes and pre-existing active faults, as well as the seismotectonics of Aso volcano.  相似文献   

18.
A disastrous earthquake with a magnitude M S = 8.0 (M W = 7.9), in China called “the 5.12 Wenchuan earthquake,” occurred on May 12, 2008, in Sichuan province on the border between the Sino-Tibetan Mountains and the Sichuan depression. The instrumental epicenter was registered in the southeastern part of Wenchuan county, and the hypocenter depth was 14 km. As the strongest and most destructive earthquake within mainland China, it caused numerous human losses and destruction of buildings and infrastructure. The seismic effect from the main shock and aftershocks was felt in many counties, towns, and villages, though Sichuan province suffered the most. The maximum intensity of the shocks was estimated at 11 degrees, according to the Chinese macroseismic scale. In the process of source opening, from the southern part of Wenchuan county to the vicinities of Quingchuan, a seismic fault system with a total length up to 240 km out-cropped on the earth’s surface, confined to the Longmenshan fault belt. The seismic fault system disturbed the original ground, resulting in the collapse or damage to various constructions, such as buildings, homes, bridges, roads, etc. Fault offsets had a dextral strike-slip and thrust kinematic combination. The earthquake generated several tens of thousands of landslides, rockfalls, and debris flows. Many dammed ponds appeared in the epicentral zone due to the activation of landslides. Thus, the geological effects turned out to be the most destructive factor in this case. At the same time, the seismic intensity of surface shaking was abnormally low even in direct proximity to the seismic fault system. Usually it was no more than 7–8 degrees. This macroseismic phenomenon may turn out to be rather typical for many major earthquakes.  相似文献   

19.
At GMT time 13:19, August 8, 2017, an Ms7.0 earthquake struck the Jiuzhaigou region in Sichuan Province, China, causing severe damages and casualties. To investigate the source properties, seismogenic structures, and seismic hazards, we systematically analyzed the tectonic environment, crustal velocity structure in the source region, source parameters and rupture process, Coulomb failure stress changes, and 3-D features of the rupture plane of the Jiuzhaigou earthquake. Our results indicate the following: (1) The Jiuzhaigou earthquake occurred on an unmarked fault belonging to the transition zone of the east Kunlun fault system and is located northwest of the Huya fault. (2) Both the mainshock and aftershock rupture zones are located in a region where crustal seismic velocity changes dramatically. Southeast to the source region, shear wave velocity at the middle to lower crust is significantly low, but it rapidly increases northeastward and lies close to the background velocity across the rupture fault. (3) The aftershock zone is narrow and distributes along the northwest-southeast trend, and most aftershocks occur within a depth range of 5–20 km. (4) The focal mechanism of the Jiuzhaigou earthquake indicates a left-lateral strike-slip fault, with strike, dip, and rake angles of 152°, 74° and 8°, respectively. The hypocenter depth measures 20 km, whereas the centroid depth is about 6 km. The co-seismic rupture mainly concentrates at depths of 3–13 km, with a moment magnitude (Mw) of 6.5. (5) The co-seismic rupture also strengthens the Coulomb failure stress at the two ends of the rupture fault and the east segment of the Tazang fault. Aftershocks relocation results together with geological surveys indicate that the causative fault is a near vertical fault with notable spatial variations: dip angle varies within 66°–89° from northwest to southeast and the average dip angle measures ~84°. The results of this work are of fundamental importance for further studies on the source characteristics, tectonic environment, and seismic hazard evaluation of the Jiuzhaigou earthquake.  相似文献   

20.
Sliding-window cross-correlation method is firstly adopted to identify sPn phase, and to constrain focal depth from regional seismograms, by measuring the time separation between sPn and Pn phases. We present the focal depths of the 17 moderate-sized aftershocks (M S⩾5.0) of the Wenchuan M S8.0 earthquake, using the data recorded by the regional seismic broadband networks of Shaanxi, Qinghai, Gansu, Yunnan and Sichuan. Our results show focal depths of aftershocks range from 8 to 20 km, and tend to cluster at two average depths, separate at 32.5°N, i.e., 11 km to the south and 17 km to the north, indicating that these aftershocks are origin of upper-to-middle crust. Combined with other results, we suggest that the Longmenshan fault is not a through-going crustal fault and the Pingwu-Qingchuan fault may be not the northward extension of the Longmenshan thrust fault. Supported by the National Natural Science Foundation of China (Grant Nos. 40604009 and 40574040) and Special Project for the Fundamental R & D of Institute of Geophysics, China Earthquake Administration (Grant No.DQJB08B20)  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号