共查询到19条相似文献，搜索用时 156 毫秒
1.
介绍了矿山地震与瓦斯突出等煤矿灾害及成因， 并通过若干煤矿瓦斯突出和矿山地震的同震现象，论述了这些灾害在动力过程中的内在关系.这些震例表明，在高瓦斯煤矿， 矿山地震与瓦斯突出存在密切的相关.认为较大矿震伴随瓦斯的低值延时响应可能是瓦斯突出的预警信号.从矿震定位、震源机制、矿震成因、瓦斯突出条件等分析了矿震与瓦斯突出相关的机理. 进一步介绍了瓦斯流体对矿震的触发作用，尤其超临界流体的特殊性质在矿震发生中的重要作用.依据矿震与构造地震在机制方面的相似性， 讨论了上述结果在震源物理研究中的意义. 相似文献
2.
3.
矿震识别及成因研究进展 总被引：2，自引：0，他引：2
矿震主要受开采活动、矿山所处构造环境及区域构造应力场的影响。本文首先回顾了矿震的识别研究进展,然后从矿震震源机制、矿震与构造关系、矿震与瓦斯溢出、矿震与开采进程关系、矿震成因力学机制理论与实验研究等角度对矿震的成因研究进行了阐述,最后给出矿震识别及成因研究的进一步建议。矿震成因研究深化了对天然地震的认识。在研究矿震发生机理时,必须针对具体条件进行深入讨论与分析,应更多采用有关数学和力学手段,结合具体的生产地质条件和科学实验研究,有针对性地开展研究工作。可利用层析成像技术详细了解矿震演变过程,深化对地壳介质在应力作用下发生破裂或位错过程的认识,进而对矿震发震成因进行深入研究。 相似文献
4.
在构造地震的成因研究中,流体的作用日益显现并受到越来越广泛的重视.最新的理论认为,根据矿山地震与构造地震的相似性,利用瓦斯和CO2等流体在矿震发生过程中的作用研究,有可能找出流体对矿震成因的作用证据,从而为大地震成因研究提供中尺度实验依据. 相似文献
5.
强矿震地球物理过程及短临阶段预测的研究 总被引：5，自引：0，他引：5
基于中尺度地震实验场高密度数字地震和前兆台网对抚顺老虎台矿两次强矿震进行连续的现场观测,用地震学方法和小波工具分析强矿震孕震过程采集到的数据,提取短临阶段的异常信息;用区域强震震源机制解、强矿震的震源机制解、极近场震源调查、震源高精度定位、现场绝对地应力测量、三维有限差分数值试验方法,分析强矿震的孕震应力场环境和震源机制;通过定量观察采矿与矿震活动的相关性,分析强矿震的直接诱发原因．提出地质构造环境、地应力场和采矿活动共同作用诱发强矿震的机理和局部应力场在孕育该震过程起主导作用、卸荷重力应力场抑或耦合了高压瓦斯的膨胀起主要诱发作用的观点;发现煤炭深部开采条件下,矿震和瓦斯存在密切的相关性,有可能存在一种开采卸荷和高压瓦斯气体膨胀耦合作用诱发的新型矿震——卸胀耦合型矿震;提取到震前短临阶段存在的b值、η值、频次、波速比等可信的地震学异常和定点潮汐形变前兆异常,对异常信息的提取方法和强矿震短临阶段的预测进行了探讨． 相似文献
6.
7.
利用鹤岗地震台及鹤岗矿震台网的观测资料,分析了矿务局点、救援队点、大陆矿、鸟山矿等4个测点的背景噪声,得到鹤岗区域矿震的典型背景噪声特征及观测环境对矿震台网的影响特点,以及矿震台网所受具体干扰源的特征,并对矿震台网的监测效能进行了评估. 相似文献
8.
矿区震动能诱发多种灾害,以瓦斯突出尤为严重。以鹤岗矿区为研究对象,统计了历年来鹤岗地区地震及矿震活动规模,分析了以往典型的矿震引起的瓦斯灾害事例,总结了矿震作用下瓦斯灾害的机理,基于统计数据,提出了矿震瓦斯灾害预警需要解决的关键问题。初步研究表明:震动事件与煤矿灾害之间具有很强的关联性,呈现震动在前、灾害在后、时间间隔数分钟至数日不等的“先震后灾”的特点,基于此,通过建立矿震监测台网,给出了震动诱发煤矿瓦斯灾害预警可行性,并提出了震动引起瓦斯灾害预警思路。 相似文献
9.
10.
11.
This paper presents an overview of mining seismicity, gas outburst and their origin. The internal relation of mining seismicity and gas outburst in the dynamic process is studied on the basis of the fact that these disasters sometimes occur simultaneously. The examples show a close relationship between mining seismicity and gas outburst in high gassy coal mines. It is proposed that strong mine shocks plus the response of low value and delay time are early warning signals. The mechanism of the relationship between mining seismicity and gas outburst is analyzed by using the location of mining shocks, focus mechanism, cause of mining shocks and conditions of gas outburst. The trigger action of gas fluid on mining shocks, especially the effect of the anomalous property of supercritical fluid on the preparation and occurrence of mining shocks is discussed. According to the similarity between min-ing-induced earthquakes and tectonic earthquakes in terms of mechanism, the significance of the above results in the study of physics of earthquake source is also discussed. 相似文献
12.
A two-dimensional walkaway vertical seismic profiling survey using distributed acoustic sensing was conducted at an onshore site in Japan. The maximum depth and the deviation of the observation well were more than 4,000 m and 81 degrees, respectively. Among the several methods for installing fibre optic cables, we adopted the inside coiled tubing method, in which coiled tubing containing a fibre optic cable is deployed. The signal-to-noise ratio of the raw shot gather was low, possibly due to poor coupling between the fibre optic cable and the subsurface formation resulting from the fibre optic cable deployment method and the existence of considerable tubewave noise. Nevertheless, direct P-wave arrivals, P–P reflections and P–S converted waves exhibited acceptable signal-to-noise ratios after careful optimization of gauge length for distributed acoustic sensing optical processing and the application of carefully parameterized tubewave noise suppression. One of the challenges in current distributed acoustic sensing vertical seismic profile data processing is the separation of P- and S-waves using only one-component measurements. Hence, we applied moveout correction using two-dimensional ray tracing. This process effectively highlights only reflected P-waves, which are used in subsequent subsurface imaging. Comparison with synthetic well seismograms and two-dimensional surface seismic data confirms that the final imaging result has a sufficiently high quality for subsurface monitoring. We acquired distributed acoustic sensing vertical seismic profile data under both flowing conditions and closed conditions, in which the well was shut off and no fluid flow was allowed. The two imaging results are comparable and suggest the possibility of subsurface imaging and time-lapse monitoring using data acquired under flowing conditions. The results of this study suggest that, by adopting the inside coiled tubing method without drilling a new observation well, more affordable distributed acoustic sensing vertical seismic profile monitoring can be achieved in fields such as CO2 capture and storage and unconventional shale projects, where monitoring costs have to be minimized. 相似文献
13.
N. Junno E. Koivisto I. Kukkonen A. Malehmir C. Wijns M. Montonen 《Geophysical Prospecting》2020,68(1):82-102
The Kevitsa mafic-ultramafic intrusion, located within the Central Lapland Greenstone Belt in northern Finland, hosts a large, disseminated Ni–Cu–PGE sulphide deposit. A three-dimensional seismic reflection survey was conducted over the Kevitsa intrusion in 2010 primarily for open-pit mine planning and for deep mineral exploration purposes. In the Kevitsa three-dimensional seismic data, laterally continuous reflections are observed within a constrained region within the intrusion. In earlier studies, it has been suggested that this internal reflectivity mainly originates from contacts between the tops and more sulphide-rich bottoms of smaller scale, internally differentiated magma layers that represent a spectrum of olivine pyroxenites. However, this interpretation is not unequivocally supported by the borehole data. In this study, data mining, namely the Self-Organizing Map analysis, of extensive Kevitsa borehole data is used to investigate the possible causes for the observed internal reflectivity within the Kevitsa intrusion. Modelling of the effect of mineralization and alteration on the reflectivity properties of Kevitsa rock types, based on average modal compositions of the rock types, is presented to support the results of the Self-Organizing Map analysis. Based on the results, we suggest that the seismic reflectivity observed within the Kevitsa intrusion can possibly be attributed to alteration, and may also be linked to the presence of sulphide minerals. 相似文献
14.
Xavier Comas Nicholas Kettridge Andrew Binley Lee Slater Andrew Parsekian Andy J. Baird Maria Strack James M. Waddington 《水文研究》2014,28(22):5483-5494
Northern peatlands are a large source of atmospheric methane (CH4) and both a source and a sink of atmospheric carbon dioxide (CO2). The rate and temporal variability in gas exchanges with peat soils is directly related to the spatial distribution of these free‐phase gases within the peat column. In this paper, we present results from surface and borehole ground‐penetrating radar surveys – constrained with direct soil and gas sampling – that compare the spatial distribution of gas accumulations in two raised bogs: one in Wales (UK), the other in Maine (USA). Although the two peatlands have similar average thickness, physical properties of the peat matrix differ, particularly in terms of peat type and degree of humification. We hypothesize that these variations in physical properties are responsible for the differences in gas distribution between the two peatlands characterized by (1) gas content up to 10.8% associated with woody peat and presence of wood layers in Caribou Bog (Maine) and (2) a more homogenous distribution with gas content up to 5.7% at the surface (i.e. <0.5 m deep) in Cors Fochno (Wales). Our results highlight the variability in biogenic gas accumulation and distribution across peatlands and suggest that the nature of the peat matrix has a key role in defining how biogenic gas accumulates within and is released to the atmosphere from peat soils. © 2015 The Authors. Hydrological Processes published by John Wiley & Sons Ltd. 相似文献
15.
Understanding fracture orientations is important for optimal field development of fractured reservoirs because fractures can act as conduits for fluid flow. This is especially true for unconventional reservoirs (e.g., tight gas sands and shale gas). Using walkaround Vertical Seismic Profiling (VSP) technology presents a unique opportunity to identify seismic azimuthal anisotropy for use in mapping potential fracture zones and their orientation around a borehole. Saudi Aramco recently completed the acquisition, processing and analysis of a walkaround VSP survey through an unconventional tight gas sand reservoir to help characterize fractures. In this paper, we present the results of the seismic azimuthal anisotropy analysis using seismic traveltime, shear‐wave splitting and amplitude attenuation. The azimuthal anisotropy results are compared to the fracture orientations derived from dipole sonic and image logs. The image log interpretation suggests that an orthorhombic fracture system is present. VSP data show that the P‐wave traveltime anisotropy direction is NE to SW. This is consistent with the cemented fractures from the image log interpretation. The seismic amplitude attenuation anisotropy direction is NW to SE. This is consistent with one of the two orientations obtained using transverse to radial amplitude ratio analysis, with the dipole sonic and with open fracture directions interpreted from image log data. 相似文献
16.
17.
殿沟泉气氡浓度在汶川地震后经常出现成簇高频震荡异常。应用数据挖掘方法，采用正规化、聚类、特征值计算等方法对氡观测数据和地震目录进行预处理，提取气氡异常、震级、震源深度和地震分区等参数，在此基础上采用贝叶斯网络模型开展殿沟泉氡异常与周边区域地震活动统计关系研究。利用聚类开展的地震分区结果显示与构造分区基本吻合，反映出不同构造单元地震活动的丛集性特征；贝叶斯网络模型结果表明泉点气氡异常与周边地震活动有关，特别是与汶川地震主震区龙门山断裂中段和临近区青川断裂区域的地震活动有关。研究结果有助于了解泉点气氡对周边地震响应的差异性特征，对未来该泉点气氡异常的判断与地震预测有参考意义。为地震前兆异常分析和地震活动分区提供了一种新的技术思路和方法。 相似文献
18.
19.
断层气氢浓度观测技术试验研究 总被引：1，自引：0，他引：1
In order to explore the new technology and methods for seismic underground fluid observation, a test study on measurement of hydrogen concentration in fault gas is carried out at the piedmont fault zone of Zhongtiao Mountain. Through the experiment on observation positions, gas collection devices and sampling depths, the paper presents the observation method for fault gas hydrogen concentration by using an online automatic trace hydrogen analyzer. Comparative tests are conducted on the stability and optimum conditions of this type of instrument in the field environment, and the hydrogen concentrations at different measuring points of the same fault are observed. The results show that it is technically feasible to carry out continuous hydrogen concentration on a fault zone. The method proposed in this study could be a useful tool for setting the observation points, choosing a reasonable observation depth and scientific analysis of the observed data. 相似文献