首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 421 毫秒
1.
Global dust trajectories indicate that signi?cant quantities of aeolian‐transported iron oxides originate in contemporary dryland areas. One potential source is the iron‐rich clay coatings that characterize many sand‐sized particles in desert dune?elds. This paper uses laboratory experiments to determine the rate at which these coatings can be removed from dune sands by aeolian abrasion. The coatings impart a red colour to the grains to which previous researchers have assigned variable geomorphological signi?cance. The quantities of iron removed during a 120 hour abrasion experiment are small (99 mg kg?1) and dif?cult to detect by eye; however, high resolution spectroscopy clearly indicates that ferric oxides are released during abrasion and the re?ectance of the particles alters. One of the products of aeolian abrasion is ?ne particles (<10 µm diameter) with the potential for long distance transport. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

2.
Estimates of the wind shear stress exerted on Earth's surface using the fully rough form of the law‐of‐the‐wall are a function of the aerodynamic roughness length, z0. Accurate prediction of aeolian sediment transport rates, therefore, often requires accurate estimates of z0. The value of z0 is determined by the surface roughness and the saltation intensity, both of which can be highly dynamic. Here we report field measurements of z0 values derived from velocity profiles measured over an evolving topography (i.e. sand ripples). The topography was measured by terrestrial laser scanning and the saltation intensity was measured using a disdrometer. By measuring the topographic evolution and saltation intensity simultaneously and using available formulae to estimate the topographic contribution to z0, we isolated the contribution of saltation intensity to z0 and document that this component dominates over the topographic component for all but the lowest shear velocities. Our measurements indicate that the increase in z0 during periods of saltation is approximately one to two orders of magnitude greater than the increase attributed to microtopography (i.e. evolving sand ripples). Our results also reveal differences in transport as a function of grain size. Each grain‐size fraction exhibited a different dependence on shear velocity, with the saltation intensity of fine particles (diameters ranging from 0.125 to 0.25 mm) saturating and eventually decreasing at high shear velocities, which we interpret to be the result of a limitation in the supply of fine particles from the bed at high shear velocities due to bed armoring. Our findings improve knowledge of the controls on the aerodynamic roughness length and the grain‐size dependence of aeolian sediment transport. The results should contribute to the development of improved sediment transport and dust emission models. © 2018 John Wiley & Sons, Ltd.  相似文献   

3.
This article presents a simple physical concept of aeolian dust accumulation, based on the behaviour of the subprocesses of dust deposition and dust erosion. The concept is tested in an aeolian dust wind tunnel. The agreement between the accumulation curve predicted by the model and the accumulation curve obtained in the experiments is close to perfect and shows that it is necessary to discriminate between the processes of aeolian dust deposition and aeolian dust accumulation. Two important thresholds determine the accumulation process. For wind speeds below the deflation threshold, the aeolian accumulation of dust increases linearly with the wind speed. For wind velocities between the deflation threshold and the accumulation limit, the sedimentation balance is above unity and there is still accumulation, though it rapidly drops once the deflation threshold has been exceeded. At wind speeds beyond the accumulation limit, the sedimentation balance is below unity and there will no longer be an accumulation of dust. The thresholds have been determined in a wind tunnel test at friction velocity u* = 0·34 m s?1 (deflation threshold) and u* = 0·43 m s?1 (accumulation limit), but these values are only indicative since they depend heavily on the characteristics of the accumulation surface and of the airborne grains. Copyright © 2001 John Wiley & Sons, Ltd.  相似文献   

4.
With both sides of the Taklimakan Desert highway line as the study area, three typical aeolian sand landforms, i.e. complex dune ridge, barchan dune and flat sand land, were selected as sand beds for the observation, analysis and research of the characteristics of aeolian sand movement such as aeolian sand stream structure, sand transport intensity, etc. in the Taklimakan Desert. The results show that there is a linear relation between the height and the log of sand transport rate over transverse dune chain, longitudinal dune ridge and flat sand land, i.e. the sand transport percentage decreases exponentially with increasing height. Sand transport rate within the 10 cm height above the bed surface accounts for 80%-95% of the total sand transport rate of the observed height (40 cm), while the sand transport rate in 20 cm occupies 98% of the total amount. Sand transport rate (g·cm-1·min-1) differs greatly with respect to different landform types and different topographic positions. Based on the investig  相似文献   

5.
In arid zones, many active aeolian dunes terminate at ephemeral and perennial desert rivers. The desert rivers show very high rates of sediment transport that cause deleterious downstream effects on the river system and ecology. High sediment loading has been attributed to severe water erosion of sparsely covered watersheds during infrequent but heavy rainfall. Although aeolian erosion is known to lead to high rates of wind‐blown sand transport, direct confirmation of whether the aeolian processes accelerate or inhibit fluvial sediment loss is lacking. Here, we show that an aeolian‐fluvial cycling process is responsible for the high rate of suspended sediment transport in a Sudalaer ephemeral desert channel in the Ordos Plateau of China. Frequent aeolian processes, but low frequency (once every 3 years on average) flooding, occur in this region. Wind‐blown saltating grains appeared to be unable to cross the desert channel because of interruption of channel‐induced recirculating air flow, and therefore tended to settle in the channel during the windy seasons, leading to channel narrowing. During flooding, this narrowed channel was found to yield a threefold increase in suspended sediment loading and a 3.4‐fold increase in the weight percentage of the 0.08–0.2 mm sediment fraction on 18 July 2012. Loss of stored aeolian sand due to channel erosion accounted for about half of the total sediment yield in this watershed. These findings show that aeolian processes play an essential role in accelerating the sediment yield from a watershed characterized by aeolian‐fluvial interplay and also suggest that the drier the region and the greater the aeolian process, the more the aeolian process contributes to fluvial sediment yield. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

6.
Blowouts are the most regionally pervasive active aeolian landform on the northern Great Plains of North America. This study reports a long‐term investigation into the morphological development of two adjacent blowouts in a continental dune field. The blowouts were monitored for a decade in the Bigstick Sand Hills of southwestern Saskatchewan, Canada. Topographic changes were determined from dense arrays of erosion pins in each blowout (1 per 4 m2, n = 171; and 1 per 16 m2, n = 150). Pin measurements were made 16 times between May 1994 and May 2004. Over the decade both blowouts expanded and more than doubled in volume. Differences in form–flow interactions have caused the larger of the two blowouts to deposit more than a metre of sediment within the deflation basin, and the smaller blowout to erode by more than a metre. A negative feedback effect was triggered when the larger blowout reached a critical size around 1994 (60 m × 36 m × 8·1 m, length × width × height) when sediment was no longer eroded from the deflation basin. A positive feedback in the smaller blowout continues to facilitate erosion from the deflation basin. Monthly observations since 2002 indicate that aspect plays an important role in the development of these blowouts by creating a spatial asymmetry in sediment availability. Sediment is more readily available throughout the year on south‐facing slopes, which receive greater insolation than north‐facing slopes and are often drier and more frequently thawed in this cold‐climate environment. Comparisons between climate data from a remote meteorological station 45 km to the southwest and sediment transport indices developed from the erosion pin data produced very few correlations significant at the 95 per cent confidence level. Nevertheless, the signs of the correlation coefficients indicate that sediment erosion and deposition in both blowouts respond similarly to the following climate variables recorded at the remote station: (i) the amount of precipitation, (ii) the transport capacity of the wind and (iii) transporting winds from a directional wedge between 180 and 330°. Taken altogether, the results from this study highlight the importance of climate and feedback effects in blowout development that may be extended to other blowouts in continental and coastal settings. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

7.
In aeolian sand sheets the interaction between aeolian and subaqueous processes is considered one of the principal factors that controls this depositional environment. To examine the role played by the subaqueous processes on the construction and accumulation of sand sheets, surface deposits and subsurface sedimentary sections of a currently active aeolian sand sheet, located in the Upper Tulum Valley (Argentina), have been examined. On the sand sheet surface, airflows enable the construction of nabkhas, wind‐rippled mantles (flattened accumulations of sand forming wind ripples), megaripples, and small transverse dunes. Subaqueous deposits consist of sandy current ripples covered by muddy laminae. The latter are generated by annual widespread but low‐energy floods that emanate from the nearby mountains in the aftermath of episodes of heavy precipitations. Deposits of subaqueous origin constitute 5% of the accumulated sand sheet thickness. The construction of the sand sheet is controlled by meteorological seasonal changes: the source area, the San Juan river alluvial fan, receives sediment by thaw‐waters in spring–summer; in fall–winter, when the water table lowers in the alluvial fan, the sediment is available for aeolian transport and construction of the sand sheet area. The flood events play an important role in enabling sand sheet accumulation: the muddy laminae serve to protect the underlying deposits from aeolian winnowing. Incipient cement of gypsum on the sand and vegetation cover acts as an additional stabilizing agent that promotes accumulation. Episodic and alternating events of erosion and sedimentation are considered the main reason for the absence of soils and palaeosols. Results from this study have enabled the development of a generic model with which to account for: (i) the influence of contemporaneous subaqueous processes on the construction and accumulation in recent and ancient sand sheets; and (ii) the absence of developed soils in this unstable topographic surface. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

8.
Changes in wind speed and sediment transport are evaluated at a gap and adjacent crest of a 2 to 3 m high, 40 m wide foredune built by sand fences and vegetation plantings on a wide, nourished fine sand beach at Ocean City, New Jersey. Anemometer masts, cylindrical sand traps and erosion pins were placed on the beach and dune during two obliquely onshore wind events in February and March 2003. Results reveal that: (1) changes in the alongshore continuity of the beach and dune system can act as boundaries to aeolian transport when winds blow at an angle to the shoreline; (2) oblique winds blowing across poorly vegetated patches in the dune increase the potential for creating an irregular crest elevation; (3) transport rates and deflation rates can be greater within the foredune than on the beach, if the dune surface is poorly vegetated and the beach has not had time to dry following tidal inundation; (4) frozen ground does not prevent surface deflation; and (5) remnant sand fences and fresh storm wrack have great local but temporary effect on transport rates. Temporal and spatial differences due to sand fences and wrack, changes in sediment availability due to time‐dependent differences in surface moisture and frozen ground, combined with complex topography and patchy vegetation make it difficult to specify cause–effect relationships. Effects of individual roughness elements on the beach and dune on wind flow and sediment transport can be quantified at specific locations at the event scale, but extrapolation of each event to longer temporal and spatial scales remains qualitative. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

9.
Among the perennially frozen lakes of the Dry Valleys of South Victoria Land (Antarctica), some are dry‐based, i.e. frozen to the bottom. One of these is studied here by a multiparametric investigation (isotopic composition in δD and δ18O, ions, gas and ice texture analyses). A sediment layer about 10 cm thick appearing at a depth of 3·5 m is also studied by grain size, X‐ray diffraction and scanning electron microscope analyses. The information retrieved indicates that this ice‐block lake results from a build‐up in two steps and explains how aeolian sediments were included as a layer into the ice. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

10.
Experimental study of aeolian sand ripples in a wind tunnel   总被引：1，自引：0，他引：1       下载免费PDF全文
The topographic parameters and propagation velocity of aeolian sand ripples reflect complex erosion, transport, and deposition processes of sand on the land surface. In this study, three Nikon cameras located in the windward (0–1 m), middle (4.5–5.5 m), and downwind (9–10 m) zones of a 10 m long sand bed are used to continuously record changes in sand ripples. Based on the data extracted from these images, this study reaches the following conclusions. (1) The initial formation and full development times of sand ripples over a flatbed decrease with wind velocity. (2) The wavelengths of full development sand ripples are approximately twice the wavelengths of initially formed sand ripples. Both wavelengths increase linearly with friction velocity. During the developing stage of sand ripples, the wavelength increases linearly with time. (3) The propagation velocity of full development sand ripples is approximately 0.6 times that of the initially formed sand ripples. The propagation velocity of both initial and full development of sand ripples increase as power functions with respect to friction velocity. During the developing stage of sand ripples, the propagation velocity decreases with time following a power law. These results provide new information for understanding the formation and evolution of aeolian sand ripples and help improve numerical simulations. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

11.
Unsuccessful attempts to use process‐scale models to predict long‐term aeolian sediment transport patterns have long been a feature of aeolian research. It has been proposed that one approach to overcome these problems is to identify micro‐scale variables that are important at longer timescales. This paper assesses the contribution of two system variables (secondary airflow patterns and fetch distance) to medium‐term (months to years) dune development. The micro‐scale importance of these variables had been established during previous work at the site (Magilligan Strand, Northern Ireland). Three methods were employed. First, sand drift potentials were calculated using 2 years of regional wind data and a sediment transport model. Second, wind data and large trench traps (2 m length × 1 m width × 1·5 m depth) were used to assess the actual sediment transport patterns over a 2‐month period. Third, a remote‐sensing technique for the identification of fetch distance, a saltation impact sensor (Safire) and wind data were utilized to gauge, qualitatively, sediment transport patterns over a 1‐month period. Secondary airflow effects were found to play a major role in the sediment flux patterns at these timescales, with measured and predicted rates matching closely during the trench trap study. The results suggest that fetch distance is an unimportant variable at this site. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

12.
Sunset Crater in north‐central Arizona (USA) is a 900‐year‐old scoria‐cone volcano. Wind action has redistributed its widespread tephra deposit into a variety of aeolian dune forms that serve as a terrestrial analog for similar landforms and aeolian processes on Mars. Fieldwork was conducted to collect essential geomorphological and sedimentological data, and to establish a baseline for the type and morphometry of dunes, physical properties, interactions with topography, and saltation pathways. Our analyses focused primarily on coppice dunes, falling dunes, wind ripples, and sand streaks. For all collected volcaniclastic aeolian sediment samples, the sand‐size fraction dominated, ranging from almost 100% sand to 74.6% sand. No sample contained more than 1.6% silt. The composition is overwhelmingly basaltic with non‐basaltic particles composing 2 to 6% of the total. Coppice (nebkha) dunes form where clumps of vegetation trap saltating particles and create small mounds or hummocks. Mean grain size for coppice dune samples is coarse sand. Measured dune height for 15 coppice dunes ranged from 0.3 to 3.3 m with a mean of 1 m. Mean length was 6.7 m and mean width was 4.8 m. Falling dunes identified in this study are poorly developed and thin, lacking a prominent ramp‐like structure. Mean wavelength for three sets of measured ripples ranged from 22 to 36 cm. Sand streaks extend downwind for more than a kilometer and are up to 200 m in width. They commonly occur on the lee side of mesas and similar landforms and are typically the downwind continuation of falling dunes. Falling dunes, wind ripples, and sand streaks have been identified on Mars, while coppice dunes are similar to Martian shadow or lee dunes in which sand accumulates in the lee of obstacles. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

13.
A remote sensing technique for assessing beach surface moisture was used to provide insight into beach‐surface evolution during an aeolian event. An experiment was carried out on 21 October 2007 at Greenwich Dunes, Prince Edward Island National Park, Canada, during which cameras were mounted on a mast on the foredune crest at a height of about 14 m above the beach. Maps of beach surface moisture were created based on a calibrated relationship between surface brightness from the photographs and surface moisture content measured in situ at points spaced every 2.5 m along a transect using a Delta‐T moisture probe. A time sequence of maps of surface moisture content captured beach surface evolution through the transport event at a spatial and temporal resolution that would be difficult to achieve with other sampling techniques such as impedance probes. Erosion of the foreshore and berm crest resulted in an increase in surface moisture content in these areas as the wetter underlying sediments were exposed. Flow expansion downwind of the berm crest led to sand deposition and a consequent decrease in surface moisture content. Remote sensing systems such as the one presented here allow observations of the combined evolution of beach surface moisture, shoreline position, and fetch distances during short‐term experiments and hence provide a comprehensive rendering of sediment erosion and transport processes. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

14.
Experiments were conducted on Magilligan Strand, Northern Ireland, to assess the influence of the fetch effect on aeolian sediment transport. During each experiment surface sediments were uniformly dry and unhindered by vegetation or debris. The leading edge of erodible material was well defined, with the limit of wave up‐rush demarcating the wet–dry boundary; the work was conducted during low tides. A number of electronic and integrating traps were utilised, with two ultrasonic anemometers used to measure wind direction and velocity at 1 Hz. The combination of 1o direction data and trap locations resulted in a range of fetch distances, from 2 to 26 m. Data integrated over 15‐minute intervals (corresponding to the integrating trap data) revealed a distinct trend for all the experiments. An initial rapid increase in the transport rate occurred over a short distance (4–9 m). This maximum transport rate was maintained for a further 5–6 m before a steady decay in the flux followed, as fetch distance increased. A measured reduction in wind speed (6–8%) across the beach suggests a negative feedback mechanism may be responsible for the diminishing transport rate: the saltating grains induce energy dissipation, thus reducing the capability of the wind to maintain transport. For one experiment, the presence of compact sediment patches may also have contributed to the reduction of the transport rate. The decay trend calls into question the utility of the fetch effect as an important parameter in aeolian studies that seek to understand sediment budgets of the foredune‐beach zone. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

15.
Aeolian abrasional, depositional and deflational features indicate exceptionally strong southwesterly winds in a giant sandstone weathering pit in Grand Staircase Escalante Monument, about 22 km southeast of Escalante, Utah. The 60 m wide, 5–20 m deep pit has developed near the summit of a broad, barren 160‐m‐high dome on the Lower Jurassic Navajo Sandstone. Unlike other giant weathering pits (10–30 m diameter) in the region, the bedrock floor of this pit is undulatory, and there is a cylindrical, 10‐m‐high rock pedestal in the centre of the pit. An active dune surrounds the central pedestal and at times has as much as 8 m of local relief. The dune shifts considerably over brief (<1 year) periods of time. Fine‐grained (<250 µm) dunal sand on the pit floor is periodically removed by deflation, leaving coarser sand (>250 µm) trapped in the pit. Dunal sand is typically derived from external sources (other than the pit walls and floor). Centimetre to metre‐scale abrasional features such as grooves, flutes and dedos occur on the bedrock walls and floor of the pit. These dedos and other streamlined aeolian sculpted host‐rock features occur in clusters and typically form in the lee of iron concretions. The dedos are similar to the controversial stalked blueberries on Mars. Above the western rim of the pit there is a 29‐m‐long, 5‐m‐wide aeolian groove with a fluted bedrock floor. A 1·2‐km‐long bedrock valley descends to the southwest from the pit and groove, amplifying southwesterly winds. Data from hand‐held anemometers suggest that southwesterly winds can be accelerated 200–300 per cent or more by local topography. Copyright © 2008 John Wiley and Sons, Ltd.  相似文献   

16.
This paper deals with the effects of wind on rockwall dynamics. On 5 and 6 January, 1988 very strong northwest winds (blizzard) were blowing onto the rockwall of Mount Saint-Pierre (alt.: 424 m), Gaspésie, Québec (Canada). The most violent recorded squall reached 99·4 km h?1. During this event, the summit plateau received a large amount of aeolian sediments originating from the shale rockwall that forms the mountain's northwest side. In the 15 to 20 m wide by 75 m long belt located along the top of the rockwall, over a 1200 m2 area, a continuous layer of debris completely covered the snow. This layer of debris had a mean thickness of 11·4 mm, which represents an accumulated volume in the order of 13 m3. Largely dominated by sand and granules (2–4 mm), the 28 samples collected for grain-size analysis also contained numerous thin shale flakes, many of which were longer than 10 mm. The largest flake measured had a width of 134 mm and a weight of 164·3 g. Six available 14C dates provide information concerning mean cliff-top aeolian sedimentation rate for the last thousand years (c. 1·8 mmyr?1).  相似文献   

17.
The measurement of aeolian sand transport rates at high temporal and spatial resolution is crucial for further progress in testing and developing numerical models of sand movement by wind and in the modelling of sand dunes, ripples and so on. This paper reports the development and field testing of two sand transport sensors. The first one, a webcam commonly used with personal computers, is a new device in aeolian research. The webcam frame transfer is triggered by a sonic anemometer every 0·1 second. Consecutive frames are compared and analysed in real‐time by a computer program. Changes in pixel light intensity exceeding a threshold level are recorded and interpreted as grain movements. The second sensor is a small‐sized ‘Saltiphone’‐type device made of simple loudspeakers with a diameter of 15 mm as used in MP3 players. It can be deployed as a 2 × 3 array of six such devices distributed to enable horizontal and vertical spatial sampling of the sand flux. The devices are tested under field conditions. Both signals and the sum of microphone impacts over 15 minutes are compared to data gathered using a Guelph sand trap, and very good agreement is found. Measurements in a wind tunnel using sieved natural sand indicate that the webcam can be used to infer additional information about the grain size. As an application, the fluid and impact thresholds for aeolian sand transport are investigated in field measurements by analysing the onset and breakdown of saltation in gust and lull intervals of rising and falling wind speeds, respectively. In this way, constitutive equations for sand transport in terms of the wind speed can be tested. If viable, they can be employed to infer estimates for the thresholds by minimizing the root‐mean‐square error between measured and calculated transport data. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

18.
Aeolian processes – the erosion, transport, and deposition of sediment by wind – play important geomorphological and ecological roles in drylands. These processes are known to impact the spatial patterns of soil, nutrients, plant-available water, and vegetation in many dryland ecosystems. Tracers, such as rare earth elements and stable isotopes have been successfully used to quantify the transport and redistribution of sediment by aeolian processes in these ecosystems. However, many of the existing tracer techniques are labor-intensive and cost-prohibitive, and hence simpler alternative approaches are needed to track aeolian redistribution of sediments. To address this methodological gap, we test the applicability of a novel metal tracer-based methodology for estimating post-fire aeolian sediment redistribution, using spatio-temporal measurements of low-field magnetic susceptibility (MS). We applied magnetic metal tracers on soil microsites beneath shrub vegetation in recently burned and in control treatments in a heterogeneous landscape in the Chihuahuan desert (New Mexico, USA). Our results indicate a spatially homogeneous distribution of the magnetic tracers on the landscape after post-burn wind erosion events. MS decreased after wind erosion events on the burned shrub microsites, indicating that these areas functioned as sediment sources following the wildfire, whereas they are known to be sediment sinks in the undisturbed (e.g. not recently burned) ecosystem. This experiment represents the first step toward the development of a cost-effective and non-destructive tracer-based approach to estimate the transport and redistribution of sediment by aeolian processes. © 2018 John Wiley & Sons, Ltd.  相似文献   

19.
This short communication describes the development and application of analytical reasoning to quantify instability of an aeolian environment using scale‐dependent information coupled with conceptual knowledge of process and feedback mechanisms. Specifically, a simple Fuzzy Cognitive Map (FCM) for aeolian landscape instability was developed that represents conceptual knowledge of key biophysical processes and feedbacks. Model inputs include satellite‐derived surface biophysical and geomorphometric parameters. FCMs are a knowledge‐based artificial intelligence (AI) technique that merges fuzzy logic and neural computing in which knowledge or concepts are structured as a web of relationships that is similar to both human reasoning and the human decision‐making process. Given simple process–form relationships, the analytical reasoning model is able to map the influence of land management practices and the geomorphology of the inherited surface on aeolian instability within the South Texas Sand Sheet. Results suggest that FCMs can be used to formalize process–form relationships and information integration analogous to human cognition with future iterations accounting for the spatial interactions and temporal lags across the sand sheets. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

20.
The behaviour of offshore‐directed winds over coastal dune and beach morphology was examined using a combination of modelling (3‐D computational fluid dynamics (CFD)) and field measurement. Both model simulations and field measurements showed reversal of offshore flows at the back beach and creation of an onshore sediment transport potential. The influence of flow reversals on the beach‐dune transport system and foredune growth patterns has previously received little attention. Detailed wind flow measurements were made using an extensive array of mast‐mounted, 3‐D ultrasonic anemometers (50 Hz), arranged parallel to the dominant incident wind direction. Large eddy simulation (LES) of the offshore wind flow over the dune was conducted using the open‐source CFD tool openFOAM. The computational domain included a terrain model obtained by airborne LiDAR and detailed ground DGPS measurements. The computational grid (~22 million cells) included localized mesh refinement near the complex foredune terrain to capture finer details of the dune morphology that might affect wind flows on the adjacent beach. Measured and simulated wind flow are presented and discussed. The CFD simulations offer new insights into the flow mechanics associated with offshore winds and how the terrain steering of wind flow impacts on the geomorphological behaviour of the dune system. Simulation of 3‐D wind flows over complex terrain such as dune systems, presents a valuable new tool for geomorphological research, as it enables new insights into the relationship between the wind field and the underlying topography. The results show that offshore and obliquely offshore winds result in flow reversal and onshore directed winds at distances of up to 20 m from the embryo dune toe. The potential geomorphological significance of the findings are discussed and simple calculations show that incoming offshore and obliquely offshore winds with mean velocities over 13 m s?1 and 7 m s?1, respectively, have the potential to create onshore‐directed winds at the back beach with mean velocities above 3.3 m s?1. These are above the threshold of movement for dry sand and support previous conclusions about the significance of offshore winds in dune and beach budget calculations. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号