首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 359 毫秒
1.
Long‐term average rates of channel erosion and sediment transport depend on the frequency–magnitude characteristics of ?ood ?ows that exceed an erosion threshold. Using a Poisson model for rainfall and runoff, analytical solutions are developed for average rates of stream incision and sediment transport in the presence of such a threshold. Solutions are derived and numerically tested for three erosion/transport formulas: the Howard–Kerby shear‐stress incision model, the Bridge–Dominic sediment transport model, and a generic shear‐stress sediment transport model. Results imply that non‐linearity resulting from threshold effects can have a ?rst‐order impact on topography and patterns of dynamic response to tectonic and climate forcing. This non‐linearity becomes signi?cant when fewer than about half of ?ood events are capable of detaching rock or sediment. Predicted morphology and uplift‐gradient scaling is more closely consistent with observations and laboratory experiments than conventional slope‐linear or shear‐linear erosion laws. These results imply that particle detachment thresholds are not details that can be conveniently ignored in long‐term landscape evolution models. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

2.
Estimating recent patterns of erosion and rock uplift within Cenozoic orogens has proven difficult as signals of these processes have been obfuscated by Plio‐Pleistocene glaciation. The topography of many mountain ranges integrates the effects of long‐lived rock uplift, Late‐Cenozoic climate variation, and post‐glacial landscape adjustment. In this study, we employ a suite of topographic analyses to study the relief of an active mountain range on a sub‐catchment scale in an effort to the separate the long‐term signal of rock uplift from perturbations due to shorter‐lived climate signals. We focus on the Olympic Mountains, USA, where patterns of exhumation and glaciation have been previously estimated; however, our methods and results are broadly applicable to other orogens. Our analysis shows that Plio‐Pleistocene alpine glaciers and the Cordilleran Ice Sheet have reduced the elevations of channel profiles and created anomalously low channel relief in the Olympic Mountains. Large low‐gradient areas formed at lower elevations where ice sheets were present and alpine glaciers widened and deepened valleys. In the more rugged core of the range, near‐threshold hillslopes along the margins of the oversteepened glacially‐carved valleys, dominate the range. This implies a strong Plio‐Pleistocene glacial climate control on the topography over the more recent evolution of the Olympic Mountains. However, the broad relief structure of the range appears to still record the regional rock uplift pattern and is suggestive of an east‐plunging antiform, consistent with folding of the subducting plate or underplating of accreted rocks. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

3.
Natural bedrock rivers flow in self‐formed channels and form diverse erosional morphologies. The parameters that collectively define channel morphology (e.g. width, slope, bed roughness, bedrock exposure, sediment size distribution) all influence river incision rates and dynamically adjust in poorly understood ways to imposed fluid and sediment fluxes. To explore the mechanics of river incision, we conducted laboratory experiments in which the complexities of natural bedrock channels were reduced to a homogenous brittle substrate (sand and cement), a single sediment size primarily transported as bedload, a single erosion mechanism (abrasion) and sediment‐starved transport conditions. We find that patterns of erosion both create and are sensitive functions of the evolving bed topography because of feedbacks between the turbulent flow field, sediment transport and bottom roughness. Abrasion only occurs where sediment impacts the bed, and so positive feedback occurs between the sediment preferentially drawn to topographic lows by gravity and the further erosion of these lows. However, the spatial focusing of erosion results in tortuous flow paths and erosional forms (inner channels, scoops, potholes), which dissipate flow energy. This energy dissipation is a negative feedback that reduces sediment transport capacity, inhibiting further incision and ultimately leading to channel morphologies adjusted to just transport the imposed sediment load. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

4.
Identifying the influence of neotectonics on the morphology of elevated passive margins is complicated in that major morpho‐structural patterns might plausibly be explained by processes related to late Mesozoic to early Cenozoic rifting and/or differential erosion induced by Cenozoic epeirogenic uplift. The proportional contribution of each process can vary from continent to continent, and potentially even within the same passive margin. In the passive margin setting of the southeast Australian highlands the documented occurrence of neotectonic deformation is rare, and accordingly its role in landscape evolution is difficult to establish. The results of investigations within the Lapstone Structural Complex, which forms the eastern range front of the Blue Mountains Plateau, provide evidence for two periods of Cenozoic neotectonic uplift in this part of the highlands. The first, demonstrated by seismic and structural evidence, is suggested to have occurred in the Paleogene, and is thus unrelated to Cretaceous rifting. The second period, demonstrated by evidence from the Kurrajong Fault (presented herein) suggests that uplift occurred in both the Mio‐Pliocene and the Middle Pleistocene. The cumulative Neogene and younger uplift of ~15 m determined for the Kurrajong Fault is less than 10% of the 130 m of total measured throw across the fault. The apparently minor contribution of neotectonism to the current elevation of the Blue Mountains Plateau supports a predominantly erosional exhumation origin for the topographic relief at the plateau's eastern edge. This finding contrasts with evidence from fault complexes associated with similar topographic relief elsewhere in the south‐eastern highlands, indicating that present‐day topography cannot be directly related to relief generated by Neogene and younger uplift, even from relatively closely‐spaced (< 150 km) structures within the same passive margin. These findings have implications for understanding the spatio‐temporal variability of post‐rift faulting in continental passive margin settings and the evolution of landscapes therein. © Commonwealth of Australia. Earth Surface Processes and Landforms © 2014 John Wiley & Sons, Ltd.  相似文献   

5.
This study explores paleoflood deposits of the Siang River, known as the Tsangpo in Tibet. The river that often experiences large floods brings down huge amount of sediment and water that adversely affect the downstream regions with large human populations in the states of northeast Himalaya and its foreland. Along it's ~300 km mountainous stretch we collected samples for sedimentological, petrographic and Sr–Nd isotopic study to explore sediment provenance and dated the paleofloods (via optically stimulated luminescence, OSL). Geomorphic indices including precipitation and a geomorphic swath profile across the Brahmaputra catchment were studied to understand the interplay of mountain relief and rainfall that determine potential zones of high erosion and sediment supply. The OSL technique indicated the Siang River experienced at least eight large floods between 7 and 1 ka, possibly under the influence of warm and wet climatic conditions. The petrographic and isotopic data suggests that the eastern Himalayan syntaxis, which has the highest uplift and exhumation rate in the area, is not always the highest sediment producing zone. In some instances, the Tibetan plateau produces higher fluxes of sediments via glacial and landslide lake outburst floods (GLOFs and LLOFs). © 2020 John Wiley & Sons, Ltd.  相似文献   

6.
Landslides and runoff are dominant erosional agents in the tectonically active alpine South Westland area of New Zealand, characterized by high uplift rates and extreme orographic precipitation. Despite a high density of shallow debris slides and flows, the geomorphic imprints of deep‐seated bedrock failures are dominant and persistent. Over 50 large (>1 km2) landslides comprising rock slide[sol ]avalanches, complex rotational and rock‐block slides, wedge failures, and deep‐seated gravitational slope deformation were detected on air photos and shaded‐relief images. Major long‐term impacts on alpine rivers include (1) forced alluviation upstream of landslide dams, (2) occlusion of gorges and triggering of secondary riparian landslides, and (3) diversion of channels around deposits to form incised meandering gorges. Remnants of large prehistoric (i.e. pre‐1840) landslide deposits possibly represent the low‐frequency (in terms of total area affected yet dominant) end of the spectrum of mass wasting in the western Southern Alps. This is at odds with high erosion rates in an active erosional landscape. Large landslides appear to have dual roles of supplying and retaining sediment. The implications of these roles are that (1) previous models of (shallow) landslide‐derived sediment flux need to be recalibrated, and (2) geomorphic effects of earthquake‐induced landsliding may persist for at least 102 years. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

7.
To reveal river channel steepness patterns and variance in settings with significant variation in rock uplift rate, rock erodibility and moving water divides, we present a series of graphical methods to interpret channel profiles. To complement Cartesian χ plots, longitudinal profiles and mapping methods, we introduce a new method based on a radial coordinate system. We map each basin onto polar coordinates in which the radial dimension is χ and the azimuthal coordinate, ?, is calculated with an increment (Δ?) scaled to the distance to neighboring channel heads. The elevation is contoured on this mapping. Average channel steepness is estimated by fitting a conical surface to the elevation. The graph simplifies the comparison of χ and elevation between channels that share a divide, and helps identify spatial changes in drainage area and patterns of erodibility. We apply this approach to derive the uplift pattern in the eastern and southern Central Range of Taiwan, where the high tectonic convergence and uplift rates combined with sub‐tropical climate and frequent typhoons results in high exhumation rate, and well‐developed, detachment‐limited river networks. Additionally, the tectonic activity leads to drainage basin reorganization. We identify examples of divide migration, discrete river capture as well as anomalous steepness that we attribute to local variability in rock erodibility. Estimated basin‐average steepness values show the highest and a near constant value from Hsinwulu basin to Liwu basin in the center of the Island. To the north and south of this region, the values gradually decrease. These estimates show good correlation with the topography of the Central Range and erosion rates derived from in situ 10Be concentrations in river‐borne quartz. We conclude that the basin steepness reflects systematic differences in rock uplift rate and erosion rate. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

8.
In order to extend our knowledge of glacial relief production in mountainous areas new methods are required for landscape reconstructions on a temporal resolution of a glacial cycle and a spatial resolution that includes the most important terrain components. A generic data set and a 50 m resolution digital elevation model over a study area in northern Sweden and Norway (the present day landscape data set) were employed to portray spatial patterns of erosion by reconstructing the landscape over successive cycles of glacial erosion. A maximum‐value geographic information system (GIS) filtering technique using variable neighbourhoods was applied such that existing highpoints in the landscape were used as erosional anchor points for the reconstruction of past landscape topography. An inherent assumption, therefore, is that the highest surfaces have experienced insignificant down‐wearing over the Quaternary. Over multiple reconstruction cycles, proceeding backwards in time, the highest summits increase in area, valleys become shallower, and the valley pattern becomes increasingly simplified as large valleys become in‐filled from the sides. The sum of these changes reduces relief. The pattern of glacial erosion, which is to 60% correlated to slope angle and to 70% correlated to relative relief, is characterized by (i) an abrupt erosional boundary below preserved summit areas, (ii) enhanced erosion in narrow valleys, (iii) restricted erosion of smooth areas, independently of elevation, (iv) eradication of small‐scale irregularities, (v) restricted erosion on isolated hills in low‐relief terrain, and (vi) a valley widening independent of valley directions. The method outlined in this paper shows how basic GIS filtering techniques can mimic some of the observed patterns of glacial erosion and thereby help deduce the key controls on the processes that govern large‐scale landscape evolution beneath ice sheets. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

9.
Past variations in climate and tectonics have led to spatially and temporally varying erosion rates across many landscapes. In this contribution I examine methods for detecting and quantifying the nature and timing of transience in eroding landscapes. At a single location, cosmogenic nuclides can detect the instantaneous removal of material or acceleration of erosion rates over millennial timescales using paired nuclides. Detection is possible only if one of the nuclides has a significantly shorter half‐life than the other. Currently, the only practical way of doing this is to use cosmogenic in situ carbon‐14 (14C) alongside a longer lived nuclide, such as beryllium‐10 (10Be). Hillslope information can complement or be used in lieu of cosmogenic information: in soil mantled landscapes, increased erosion rates can be detected for millennia after the increase by comparing relief and ridgetop curvature. This technique will work as long as the final erosion rate is greater than twice the initial rate. On a landscape scale, transience may be detected based upon disequilibria in channel profiles or ridgetops, but transience can be sensitive to the nature of transient forcing. Where forcing is periodic, landscapes display differing behavior if forcing is driven by changes in base level lowering rates versus changes in the efficiency of either channel or hillslope erosion (e.g. driven by climate change). Oscillations in base level lowering lead to basin averaged erosion rates that reflect a long term average erosion rate despite strong spatial heterogeneity in local erosion rates. This averaging is reflected in 10Be concentrations in stream sediments. Changes in hillslope sediment transport coefficients can lead to large fluctuations in basin averaged erosion rates, which again are reflected in 10Be concentrations. The variability of erosion rates in landscapes where both the sediment transport and channel erodibility coefficients vary is dominated by changes to the hillslope transport coefficient. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

10.
The saltation–abrasion model predicts rates of river incision into bedrock as an explicit function of sediment supply, grain size, boundary shear stress and rock strength. Here we use this experimentally calibrated model to explore the controls on river longitudinal profile concavity and relief for the simple but illustrative case of steady‐state topography. Over a wide range of rock uplift rates we find a characteristic downstream trend, in which upstream reaches are close to the threshold of sediment motion with large extents of bedrock exposure in the channel bed, while downstream reaches have higher excess shear stresses and lesser extents of bedrock exposure. Profile concavity is most sensitive to spatial gradients in runoff and the rate of downstream sediment fining. Concavity is also sensitive to the supply rate of coarse sediment, which varies with rock uplift rate and with the fraction of the total sediment load in the bedload size class. Variations in rock strength have little influence on profile concavity. Profile relief is most sensitive to grain size and amount of runoff. Rock uplift rate and rock strength influence relief most strongly for high rates of rock uplift. Analysis of potential covariation of grain size with rock uplift rate and rock strength suggests that the influence of these variables on profile form could occur in large part through their influence on grain size. Similarly, covariation between grain size and the fraction of sediment load in the bedload size class provides another indirect avenue for rock uplift and strength to influence profile form. Copyright © 2008 John Wiley & Sons, Ltd.  相似文献   

11.
We have shown in a previous paper that many of the main features of braided streams can be captured in a relatively simple cellular computer model. Here we examine some of the detailed characteristics of this model. We show the qualitative form of the braiding produced by the model is generally insensitive to changes in most of the numerical parameters used in the model. The most crucial parameter choice is the use of a non-linear exponent (>1) to describe the relation between sediment flux and local stream power. Use of water discharge instead of stream power to parameterize sediment flux produces braiding, but also unrealistically high-amplitude topography variations in the long term. Introduction of a threshold transport condition causes no noticeable change in the model's behaviour. Inclusion of lateral sediment transport due to gravitational effects on lateral slopes is not crucial to produce braiding, but is needed to provide reasonable lateral channel shifting, and to maintain a continuing dynamic behaviour. As long as lateral sediment transport is included, altering the initial topography for a run has no effect, other than a transient period of regrading. In addition, we show that there is a simple and apparently fundamental connection between braided-stream channel networks and erosional (dendritic) networks that has not been previously recognized. All that is needed to switch the model from braided to dendritic patterns is either to remove redeposition from the rules, simulating entrainment of cohesive sediment, or to add a cliff to the initial topography, making local redeposition unimportant. This result suggests that the presence or absence of significant local redeposition, which causes bar formation, channel division, and avulsion, determines whether a braided or dendritic pattern will form. © 1997 John Wiley & Sons, Ltd.  相似文献   

12.
It has been long hypothesized that topography, as well as climate and rock strength, exert first order controls on erosion rates. Here we use detrital cosmogenic 10Be from 50 basins, ranging in size from 1 to 150 km2, to measure millennial erosion rates across the San Gabriel Mountains in southern California, where a strong E–W gradient in relief compared to weak variation in precipitation and lithology allow us to isolate the relationship between topographic form and erosion rate. Our erosion rates range from 35 to 1100 m/Ma, and generally agree with both decadal sediment fluxes and long term exhumation rates inferred from low temperature thermochronometry. Catchment-mean hillslope angle increases with erosion rate until ～ 300 m/Ma, at which point slopes become invariant with erosion rate. Although this sort of relation has been offered as support for non-linear models of soil transport, we use 1-D analytical hillslope profiles derived from existing soil transport laws to show that a model with soil flux linear in slope, but including a slope stability threshold, is indistinguishable from a non-linear law within the scatter of our data. Catchment-mean normalized channel steepness index increases monotonically, though non-linearly, with erosion rate throughout the San Gabriel Mountains, even where catchment-mean hillslope angles have reached a threshold. This non-linearity can be mostly accounted for by a stochastic threshold incision model, though additional factors likely contribute to the observed relationship between channel steepness and erosion rate. These findings substantiate the claim that the normalized channel steepness index is an important topographic metric in active ranges.  相似文献   

13.
We present new data about the morphological and stratigraphic evolution and the rates of fluvial denudation of the Tavoliere di Puglia plain, a low‐relief landscape representing the northernmost sector of the Pliocene‐Pleistocene foredeep of the southern Apennines. The study area is located between the easternmost part of the southern Apennine chain and the Gargano promontory and it is characterized by several orders of terraced fluvial deposits, disconformably overlying lower Pleistocene marine clay and organized in a staircase geometry, which recorded the emersion and the long‐term incision history of this sector since mid‐Pleistocene times. We used the spatial and altimetric distribution of several orders of middle to late Pleistocene fluvial terraces in order to perform paleotopographic reconstruction and GIS‐aided eroded volumes estimates. Then, we estimated denudation rates on the basis of the terraces chronostratigraphy, supported by published OSL and AAR dating. Middle to upper Pleistocene denudation rates estimated by means of such an approach are slightly lower than 0.1 mm yr‐1, in good agreement with short‐term data from direct and indirect evaluation of suspended sediment yield. The analysis of longitudinal river profiles using the stream power erosion model provided additional information on the incision rates of the studied area. Middle to late Quaternary uplift rates (about 0.15 mm yr‐1), calculated on the basis of the elevation above sea level of marine deposits outcropping in the easternmost sector of the study area, are quite similar to the erosion rates average value, thus suggesting a steady‐state fluvial incision. The approach adopted in this work has demonstrated that erosion rates traditionally obtained by quantitative geomorphic analysis and ksn estimations can be successfully integrated to quantify rates of tectonic or geomorphological processes of a landscape approaching steady‐state equilibrium. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

14.
Results from a new model of river basin evolution   总被引：1，自引：0，他引：1  
This paper briefly describes a model of the erosional development of catchments and their channel networks. The model differentiates between the dominant transport processes in hillslope and channels. The development of channels and hillslopes occurs in an integrated manner as a function of physically observable mechanisms. The growth of a river basin is qualitatively described. The model concepts are used to study the basin during periods of growth (transient periods), as well as during dynamic equilibrium. This leads to hypotheses about the relationship between slopes, relief, tectonic uplift, erodability, runoff, and catchment area. It is shown that the model leads to very reasonable and desirable behaviour of hillslopes during retreat and degradation.  相似文献   

15.
In Mediterranean semi‐arid conditions, the availability of studies monitoring channel adjustments as a response to reforestation and check dams over representative observation periods, could help develop new management strategies. This investigation is an integrated approach assessing the adjustments of channel morphology in a typical torrent of southern Italy after land‐use changes and check dam construction across a period of about 60 years. A statistical analysis of historical rainfall records, an analysis of land‐use changes in the catchment area and a geomorphological mapping of channel adjustments were carried out and combined with field surveys of bed surface grain‐size over a 5‐km reach including 14 check dams. The analysis of the historical rainfall records showed a slight decrease in the amount and erosivity of precipitation. Mapping of land‐use changes highlighted a general increase of vegetal coverage on the slopes adjacent to the monitored reaches. Together with the check dam network installation, this increase could have induced a reduction in water and sediment supply. The different erosional and depositional forms and adjustments showed a general narrowing between consecutive check dams together with local modifications detected upstream (bed aggradation and cross‐section expansion together with low‐flow realignments) and downstream (local incision) of the installed check dams. Changes in the torrent bends were also detected as a response to erosional and depositional processes with different intensities. The study highlighted: the efficiency of check dams against the disrupting power of intense floods by stabilizing the active channel and the influence of reforestation in increasing hillslope protection from erosion and disconnectivity of water and sediment flows towards the active channel. Only slight management interventions (for instance, the conversion of the existing check dams into open structures) are suggested, in order to mobilize the residual sediment avoiding further generalized incision of the active channel and coast line erosion. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

16.
The distribution of trace metals in alluvial sediments depends on their natural background concentrations, and on the dynamics of contemporary depositional and erosional (mainly flood‐induced) processes. Geological and geochemical investigations were carried out in the valley of Vistula River near Magnuszew (central Poland). Sediment samples were collected from a depth of 35 cm and comprise sediments of all defined geomorphological features. Identification and geological interpretation of the morphodynamic sediment features was supported by aerial photographs and high‐resolution satellite images. These studies revealed that the distribution of trace metals is closely linked to the morphogenesis of the alluvial floodplain. The highest concentrations of Cu, Co, Zn, V, Cr and Ni were observed in crevasse‐splays deposits. By contrast, Sr, Pb and As were concentrated in deposits which fill oxbow lakes (partly infilled with organic deposits). The lowest concentrations of trace metals were detected in flood sediments deposited within erosional troughs. The geomorphological and sedimentological history of the fluvial features explains the pattern of heavy metal distribution on the current floodplain surface. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

17.
This paper focuses on surface–subsurface water exchange in a steep coarse‐bedded stream with a step‐pool morphology. We use both flume experiments and numerical modelling to investigate the influence of stream discharge, channel slope and sediment hydraulic conductivity on hyporheic exchange. The model step‐pool reach, whose topography is scaled from a natural river, consists of three step‐pool units with 0.1‐m step heights, discharges ranging between base and over‐bankfull flows (scaled values of 0.3–4.5 l/s) and slopes of 4% and 8%. Results indicate that the deepest hyporheic flow occurs with the steeper slope and at moderate discharges and that downwelling fluxes at the base of steps are highest at the largest stream discharges. In contrast to findings in a pool‐riffle morphology, those in this study show that steep slopes cause deeper surface–subsurface exchanges than gentle slopes. Numerical simulation results show that the portion of the hyporheic zone influenced by surface water temperature increases with sediment hydraulic conductivity. These experiments and numerical simulations emphasize the importance of topography, sediment permeability and roughness elements along the channel surface in governing the locations and magnitude of downwelling fluxes and hyporheic exchange. Our results show that hyporheic zones in these steep streams are thicker than previously expected by extending the results from streams with pool‐riffle bed forms. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

18.
Floods are an important geomorphic agent that accelerate sediment supply from bank failures. The quantitative proportions supplied by lateral inputs and the transport conditions of the channel can create local or extended accumulation zones within the channel reaches. These accumulation zones play an important role in the geomorphic regime of the stream. Knowledge of long‐term history of sediment supply is necessary to determine how these input and deposition forms developed. This study introduces a new approach for the quantification of past sediment supply via lateral erosion (incised banks and individual bank failures), using a case study of the confluence of three partial tributaries in the accumulation zone in the Outer Western Carpathians. For each tributary, as well as the channel reach downstream of the confluence zone, we calculated the mean of the largest bed particles and the unit stream power as indicators of transport capacity. We found that two of the tributaries supply significant amounts of sediment to the accumulation zone because of their higher unit stream power related to their higher transport potential, and observed coarser bed sediment. Seventy‐three bank failures with a total volume 395.5 m3 were mapped, and the sediment supply volume was dated using dendrogeomorphic analysis of 114 scarred tree roots (246 samples). The total volume of the dated sediment supply in the individual tributaries was 193.9 m3, whereas the volume of erosion in the accumulation zone was only 4.9 m3 for a period of approximately 30 years. The period represented by the dated tree roots included 12 years in which erosion events occurred and impacted the total sediment budget in the study area. Although sediment supply was greater than erosion in the accumulation zone, there are no present‐day signs of accretion. The rupture of a dam in an old pond (which is situated approximately 50 m below the accumulation zone) probably increased the transport conditions in the accumulation zone so that it balanced the high sediment supply from individual tributaries. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

19.
A bank and floodplain sediment budget was created for three Piedmont streams tributary to the Chesapeake Bay. The watersheds of each stream varied in land use from urban (Difficult Run) to urbanizing (Little Conestoga Creek) to agricultural (Linganore Creek). The purpose of the study was to determine the relation between geomorphic parameters and sediment dynamics and to develop a floodplain trapping metric for comparing streams with variable characteristics. Net site sediment budgets were best explained by gradient at Difficult Run, floodplain width at Little Conestoga Creek, and the relation of channel cross‐sectional area to floodplain width at Linganore Creek. A correlation for all streams indicated that net site sediment budget was best explained by relative floodplain width (ratio of channel width to floodplain width). A new geomorphic metric, the floodplain trapping factor, was used to compare sediment budgets between streams with differing suspended sediment yields. Site sediment budgets were normalized by floodplain area and divided by the stream's sediment yield to provide a unitless measure of floodplain sediment trapping. A floodplain trapping factor represents the amount of upland sediment that a particular floodplain site can trap (e.g. a factor of 5 would indicate that a particular floodplain site traps the equivalent of 5 times that area in upland erosional source area). Using this factor we determined that Linganore Creek had the highest gross and net (floodplain deposition minus bank erosion) floodplain trapping factor (107 and 46, respectively) that Difficult Run the lowest gross floodplain trapping factor (29) and Little Conestoga Creek had the lowest net floodplain trapping factor (–14, indicating that study sites were net contributors to the suspended sediment load). The trapping factor is a robust metric for comparing three streams of varied watershed and geomorphic character, it promises to be a useful tool for future stream assessments. Published 2012. This article is a U.S. Government work and is in the public domain in the USA.  相似文献   

20.
Knickpoints in bedrock streams are often interpreted as transient features generated by a change in boundary conditions. It is typically assumed that knickpoints propagate upstream with constant vertical velocities, though this relies on a stream being in erosional steady state (erosion rate equals rock uplift rate) prior to the knickpoint's formation. Recent modeling and field studies suggest that along-stream contrasts in rock erodibility perturb streams from erosional steady state. To evaluate how contrasts in rock erodibility might impact knickpoint interpretations, we test parameter space (rock erodibility, rock contact dip angle, change in rock uplift rate) in a one-dimensional (1D) bedrock stream model that has variable rock erodibility and produces a knickpoint with a sudden change in rock uplift rate. Upstream of a rock contact, the vertical velocity of a knickpoint generated by a change in rock uplift rate is strongly correlated with how the rock contact has previously perturbed erosion rates. These knickpoints increase vertical velocity upon propagating upstream of a hard over soft contact and decrease vertical velocity upon propagating upstream of a soft over hard contact. However, interactions with other transient perturbations produced by rock contacts make for nuances in knickpoint behavior. Rock contacts also influence the geometry of knickpoints, which can become particularly difficult to identify upstream of soft over hard rock contacts. Using our simulations, we demonstrate how a contact's along-stream horizontal migration rate and cross-contact change in rock strength control how much an upstream reach is perturbed from erosional steady state. When simulations include multiple contacts, the knickpoint is particularly prone to colliding with other transient perturbations and can even disappear altogether if rock contact dips are sufficiently shallow. Caution should be taken when analyzing stream profiles in areas with significant changes in rock strength, especially when rock contact dip angles are near the stream's slope.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号