首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Riparian vegetation is known to exert a number of mechanical and hydrologic controls on bank stability. In particular, plant roots provide mechanical reinforcement to a soil matrix due to the different responses of soils and roots to stress. Root reinforcement is largely a function of the strength of the roots crossing potential shear planes, and the number and diameter of such roots. However, previous bank stability models have been constrained by limited field data pertaining to the spatial and temporal variability of root networks within stream banks. In this paper, a method is developed to use root‐architecture data to derive parameters required for modeling temporal and spatial changes in root reinforcement. Changes in root numbers over time were assumed to follow a sigmoidal curve, which commonly represents the growth rates of organisms. Regressions for numbers of roots crossing potential shear planes over time showed small variations between species during the juvenile growth phase, but extrapolation led to large variations in root numbers by the time the senescent phase of the sigmoidal growth curve had been reached. In light of potential variability in the field data, the mean number of roots crossing a potential shear plane at each year of tree growth was also calculated using data from all species and an additional sigmoidal regression was run. After 30 years the mean number of roots predicted to cross a 1 m shear plane was 484, compared with species‐specific curves whose values ranged from 240 roots for black willow trees to 890 roots for western cottonwood trees. In addition, the effect of spatial variations in rooting density with depth on stream‐bank stability was modeled using the bank stability and toe erosion model (BSTEM). Three root distributions, all approximating the same average root reinforcement (5 kPa) over the top 1 m of the bank profile, were modeled, but with differing vertical distributions (concentrated near surface, non‐linear decline with depth, uniform over top meter). It was found that stream‐bank FS varied the most when the proportion of the failure plane length to the depth of the rooting zone was greatest. Copyright © 2008 John Wiley & Sons, Ltd.  相似文献   

2.
Long‐term effects of different forest management practices on landslide initiation and volume were analysed using a physically based slope stability model. The watershed‐based model calculates the effects of multiple harvesting entries on slope stability by accounting for the cumulative impacts of a prior vegetation removal on a more recent removal related to vegetation root strength and tree surcharge. Four sequential clearcuts and partial cuts with variable rotation lengths were simulated with or without leave areas and with or without understorey vegetation in a subwatershed of Carnation Creek, Vancouver Island, British Columbia. The combined in?nite slope and distributed hydrologic models used to calculate safety factor revealed that most of the simulated landslides were clustered within a 5 to 17 year period after initial harvesting in cases where suf?cient time (c. 50 years) lapsed prior to the next harvesting cycle. Partial cutting produced fewer landslides and reduced landslide volume by 1·4‐ to 1·6‐fold compared to clearcutting. Approximately the same total landslide volume was produced when 100 per cent of the site was initially clearcut compared to harvesting 20 per cent of the area in successive 10 year intervals; a similar ?nding was obtained for partial cutting. Vegetation leave areas were effective in reducing landsliding by 2‐ to 3‐fold. Retaining vigorous understorey vegetation also reduced landslide volume by 3·8‐ to 4·8‐fold. The combined management strategies of partial cutting, increasing rotation length, provision of leave areas, and retention of viable understorey vegetation offer the best alternative for minimizing landslide occurrence in managed forests. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

3.
The important role of vegetation in adding cohesion and stabilizing streambanks has been widely recognized in several aspects of fluvial geomorphology, including stream restoration and studies of long‐term channel change. Changes in planform between braided, meandering, and anabranching forms have been attributed to the impacts of vegetation on hydraulic roughness and bank stability. However, these studies focus either on flume studies where analog vegetation is used, or case studies featuring one species, which is commonly invasive. We present functional differences of bank‐stabilizing root characteristics and added cohesion, with vegetation categorized as woody and non‐woody and by the vegetation groups of trees, shrubs, graminoids, and forbs. We analyzed root morphology and tensile strength of 14 species common to riparian areas in the southern Rocky Mountains, in field sites along streambanks in the montane and subalpine zones of the Colorado Front Range. Using the vegetation root component (RipRoot) of a physically‐based bank stability model (BSTEM), we estimated the added cohesion for various sediment textures with the addition of each of the 14 species. Significant differences exist between woody and non‐woody vegetation and between the four vegetation categories with respect to the coefficient of the root tensile strength curve, lateral root extent, and maximum root diameter. Woody vegetation (trees and shrubs) have higher values of all three parameters than non‐woody species. Tree roots add significantly more cohesion to streambanks than forb roots. Additionally, rhizomes may play an important role in determining the reach‐scale effects of roots on bank stabilization. Differences in root characteristics and added cohesion among vegetation categories have several important implications, including determining the likelihood of planform change, developing guidelines for the use of bank‐stabilizing vegetation, and linking the effect of vegetation to geomorphic structure that can benefit ecosystem functioning. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

4.
We present a geotechnical stability analysis for the planar failure of riverbanks, which incorporates the effects of root reinforcement and surcharge for mature stands of woody riparian vegetation. The analysis relies on a new method of representing the root distribution in the soil, which evaluates the effects of the vegetation's position on the bank. The model is used in a series of sensitivity analyses performed for a wide range of bank morphological (bank slope and height) and sedimentological (bank cohesion and friction angle) conditions, enabling discrimination of the types of bank environment for which vegetation has an effect on bank stability. The results indicate that woody vegetation elements have a maximal impact on bank stability when they are located at the ends of the incipient failure plane (i.e. at the bank toe or at the intersection of the failure plane with the floodplain) and that vegetation has a greater effect on net bank stability when it is growing on low, shallow, banks comprised of weakly cohesive sediments. However, the magnitude of these effects is limited, with vegetation typically inducing changes (relative to non‐vegetated banks) in simulated factors of safety of less than 5%. If correct, this suggests that the well documented effects of vegetation on channel morphology must be related to alternative process mechanisms (such as the interaction of vegetation with river flows) rather than the mechanical effects of vegetation on bank failure, except in special cases where the equivalent non‐vegetated bank has a highly marginal stability status. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

5.
Rapid changes in the composition of hillslope vegetation due to a combination of changing climate and land use make estimating slope stability a significant challenge. The dynamics of root growth on any individual hillslope result in a wide range of root distributions and strengths that are reflected as up to an order of magnitude variability in root cohesion. Hence the challenge of predicting the magnitude of root reinforcement for hillslopes requires both an understanding of the magnitude and variability of root distributions and material properties (e.g. tensile strength, elasticity). Here I develop a model for estimating the reinforcement provided by plant roots based on the distribution of biomass measured at the biome level and a compilation of root tensile strength measurements measured across a range of vegetation types. The model modifies the Wu/Waldron method of calculating root cohesion to calculate the average lateral root cohesion and its variability with depth using the Monte Carlo method. The model was validated in two ways, the first against the predicted depth‐reinforcement characteristics of Appalachian soils and the second using a global dataset of landslides. Model results suggest that the order of magnitude difference in root cohesions measured on individual hillslopes can be captured by the Monte Carlo approach and provide a simple tool to estimate root reinforcement for data‐poor areas. The model also suggests that future hotspots of slope instability will occur in areas where land use and climate convert forest to grassland, rather than changes between different forest structures or forest and shrubland. Copyright © 2018 John Wiley & Sons, Ltd.  相似文献   

6.
Predicted climate change and the associated sea level rise poses an increased threat of flooding due to wave overtopping events at sea and river dikes. To safeguard the land from flooding it is important to keep the soil erosion resistance at the dikes high. As plant roots can be very effective in reducing soil erosion rates by concentrated flow, the main goal of this study is to explore the variability in root system characteristics of five dike vegetation communities along the Scheldt River (Belgium) and to assess their effectiveness in controlling soil erosion rates during concentrated flow. This study is the first one to investigate systematically the erosion‐reducing potential of the root properties of representative dike vegetation communities in a temperate humid climate. Results show that the presence of Urtica dioica resulted in large differences in root length density (RLD) among dike vegetation communities. Observed RLD values in the topsoil ranged from 129 to 235 km m‐3 for dike vegetation communities without U. dioica, while smaller values ranging from 22 to 58 km m?3 were found for vegetation communities with U. dioica. The erosion‐reducing effect of the dike vegetation communities was estimated based on a global Hill curve model, linking the RLD to the soil detachment ratio (SDR; i.e. the ratio of the soil detachment rate for root‐permeated topsoils to the soil detachment rate for root‐free topsoils). Concentrated flow erosion rates are likely to be reduced to 13–16% of the erosion rates for root‐free topsoils if U. dioica is absent compared to 22–30% for vegetation communities with U. dioica. Hence, to maintain a high resistance of the soil against concentrated flow erosion it is important to avoid the overgrowth of grassland by U. dioica through an effective vegetation management. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

7.
This paper describes an extension to the Combined Hydrology And Stability Model (CHASM) to fully include the effects of vegetation and slope plan topography on slope stability. The resultant physically based numerical model is designed to be applied to site‐specific slopes in which a detailed assessment of unsaturated and saturated hydrology is required in relation to vegetation, topography and slope stability. Applications are made to the Hawke's Bay region in New Zealand where shallow‐seated instability is strongly associated with spatial and temporal trends in vegetation cover types, and the Mid‐Levels region in Hong Kong, an area subject to a variety of landslide mechanisms, some of which may be subject to strong topographic control. An improved understanding of process mechanism, afforded by the model, is critical for reliable and appropriate design of slope stabilization and remedial measures. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

8.
The water‐holding capacity (WHC) of the understory in the headwater regions of major rivers plays an important role in both the capacity of the forest water reservoir and water quality and quantity in the butted rivers. Although forest gaps could regulate water‐holding patterns in the understory by redistributing coarse woody debris (CWD), fine woody debris (FWD), non‐woody debris (NWD) and understory vegetation, little information is available on the effects of forest gaps on understory WHC. Therefore, we investigated the WHCs of CWD, FWD, NWD, herbaceous vegetation, mosses, epiphytes (including fern and lichen growing on the surface of logs) and soils from the gap centre to the adjacent closed canopy in an alpine forest at the upper reaches of the Yangtze River. The total WHC of the alpine forest understory components was approximately 300 mm. Soil layer had the largest contribution to the total understory WHC (90%), and among the aboveground components, CWD and mosses contributed 5% and 4% to the aboveground WHC, respectively. With the exception of that of the herbaceous layer, the WHC of the forest floor increased from the gap centre to the closed canopy. Although mosses had the lowest biomass allocation on the alpine forest floor, the water‐holding ratio (k) of mosses reached 485%. In conclusion, biomass is the parameter that most strongly and positively correlated with the WHC of the alpine forest understory, and forest gap formation decreases the understory WHC of alpine forest resulting from a decrease in organic soils, CWDs and mosses. Copyright © 2015 John Wiley & Sons, Ltd. Highlights
  • The effects of gaps on the understory WHC were examined in an alpine forest.
  • Gaps decreased the understory WHC by decreasing the amounts of the larger WHC components.
  • The contribution of CWD and mosses to the aboveground WHC was large.
  • The WHC of dead debris was higher than that of the vegetation.
  相似文献   

9.
Several mechanisms contribute to streambank failure including fluvial toe undercutting, reduced soil shear strength by increased soil pore‐water pressure, and seepage erosion. Recent research has suggested that seepage erosion of noncohesive soil layers undercutting the banks may play an equivalent role in streambank failure to increased soil pore‐water pressure. However, this past research has primarily been limited to laboratory studies of non‐vegetated banks. The objective of this research was to utilize the Bank Stability and Toe Erosion Model (BSTEM) in order to determine the importance of seepage undercutting relative to bank shear strength, bank angle, soil pore‐water pressure, and root reinforcement. The BSTEM simulated two streambanks: Little Topashaw Creek and Goodwin Creek in northern Mississippi. Simulations included three bank angles (70° to 90°), four pore‐water pressure distributions (unsaturated, two partially saturated cases, and fully saturated), six distances of undercutting (0 to 40 cm), and 13 different vegetation conditions (root cohesions from 0·0 to 15·0 kPa). A relative sensitivity analysis suggested that BSTEM was approximately three to four times more sensitive to water table position than root cohesion or depth of seepage undercutting. Seepage undercutting becomes a prominent bank failure mechanism on unsaturated to partially saturated streambanks with root reinforcement, even with undercutting distances as small as 20 cm. Consideration of seepage undercutting is less important under conditions of partially to fully saturated soil pore‐water conditions. The distance at which instability by undercutting became equivalent to instability by increased soil pore‐water pressure decreased as root reinforcement increased, with values typically ranging between 20 and 40 cm at Little Topashaw Creek and between 20 and 55 cm at Goodwin Creek. This research depicts the baseline conditions at which seepage undercutting of vegetated streambanks needs to be considered for bank stability analyses. Copyright © 2008 John Wiley & Sons, Ltd.  相似文献   

10.
Glacier forefields are landscapes in transition from glacial to non‐glacial conditions; this implies intense geomorphic, hydrological and ecological dynamics with important on‐ and off‐site effects. This special issue collects 13 papers covering recent research in both (sub‐)polar and alpine pro‐glacial environments that focus on (i) pro‐glacial sediment sources, (ii) pro‐glacial rivers, (iii) pro‐glacial lakes, (iv) ground water and ice, and (v) the development of soil and vegetation in its interplay with morphodynamics. Advances in mapping, surveying and geophysical techniques form the basis for research perspectives related to the historical evolution of pro‐glacial areas, the understanding of complex interactions of multiple processes, and the effects of continued glacier recession. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

11.
Soil erosion plays an important role in plant colonization of semi‐arid degraded areas. In this study, we aimed at deepening our knowledge of the mechanisms that control plant colonization on semi‐arid eroded slopes in east Spain by (i) determining topographic thresholds for plant colonization, (ii) identifying the soil properties limiting plant establishment and (iii) assessing whether colonizing species have specific plant traits to cope with these limitations. Slope angle and aspect were surrogates of erosion rate and water availability, respectively. Since soil erosion and water availability can limit plant establishment and both can interact in the landscape, we analysed variations in colonization success (vegetation cover and species number) with slope angle on 156 slopes, as a function of slope aspect. After determining slope angle thresholds for plant colonization, soil was sampled near the threshold values for soil analysis [nitrogen, phosphorous, calcium carbonate (CaCO3), water holding capacity]. Plant traits expressing the plant colonizing capacity were analysed both in the pool of species colonizing the steep slopes just below the threshold and in the pool of species inhabiting gentler slopes and absent from the slopes just below the threshold. Results show that the slope angle threshold for plant colonization decreased from north to south. For the vegetation cover, threshold values were 63°, 50°, 46°, 41° for the north, east, west and south slope aspect classes, respectively, and 65°, 53°, 49° and 45° for the species richness and the same aspect classes. No differences existed in soil properties at slope angle threshold values among slope aspects and between slope positions (just below and above the threshold) within slope aspect classes. This suggests that variations between slope aspect classes in the slope angle threshold result from differences in the colonizing capacity of plants which is controlled by water availability. Long‐distance dispersal and mucilage production were preferably associated with the pool of colonizing species. These results are discussed in the perspective of a more efficient ecological restoration of degraded semi‐arid ecosystems where soil erosion acts as an ecological filter for plant establishment. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

12.
The present analysis derives a stability criterion for long‐term equilibrium channel heads. The concept of finite perturbation analysis is presented, during which the surface is subjected to perturbations of a finite amplitude and resulting changes in flow path structure and slope are computed. Based on these quantities the analysis predicts whether the perturbed location is going to erode, be filled in or remain steady. The channel head is defined geometrically as the focus point of converging flow lines at the bottom of hollows. It is demonstrated that stability at the channel head grows out of the competition between the rate of flow path convergence and the degree of profile concavity. Analytical functions are derived to compute channel head‐contributing area and ‐slope, flow path convergence and profile concavity as a function of perturbation depth, distance from the crest and the initial slope. In a numerical model these quantities point to the long‐term equilibrium channel head position, which is shown to depend also on the width to length ratio of hollows. It is also demonstrated that the equilibrium channel head position is sensitive to the base‐level lowering/non‐dimensional slope length ratio and to the slope of the initial topography. Morphometrical measurements both in the field and on simulated topographies were used to test the theoretical predictions.  相似文献   

13.
Hillslopes have complex three‐dimensional shapes that are characterized by their plan shape, profile curvature of surface and bedrock, and soil depth. To investigate the stability of complex hillslopes (with different slope curvatures and plan shapes), we combine the hillslope‐storage Boussinesq (HSB) model with the infinite slope stability method. The HSB model is based on the continuity and Darcy equations expressed in terms of storage along the hillslope. Solutions of the HSB equation account explicitly for plan shape by introducing the hillslope width function and for profile curvature through the bedrock slope angle and the hillslope soil depth function. The presented model is composed of three parts: a topography model conceptualizing three‐dimensional soil mantled landscapes, a dynamic hydrology model for shallow subsurface flow and water table depth (HSB model) and an infinite slope stability method based on the Mohr–Coulomb failure law. The resulting hillslope‐storage Boussinesq stability model (HSB‐SM) is able to simulate rain‐induced shallow landsliding on hillslopes with non‐constant bedrock slope and non‐parallel plan shape. We apply the model to nine characteristic hillslope types with three different profile curvatures (concave, straight, convex) and three different plan shapes (convergent, parallel, divergent). In the presented model, the unsaturated storage has been calculated based on the unit head gradient assumption. To relax this assumption and to investigate the effect of neglecting the variations of unsaturated storage on the assessment of slope stability in the transient case, we also combine a coupled model of saturated and unsaturated storage and the infinite slope stability method. The results show that the variations of the unsaturated zone storage do not play a critical role in hillslope stability. Therefore, it can be concluded that the presented dynamic slope stability model (HSB‐SM) can be used safely for slope stability analysis on complex hillslopes. Our results show that after a certain period of rainfall the convergent hillslopes with concave and straight profiles become unstable more quickly than others, whilst divergent convex hillslopes remain stable (even after intense rainfall). In addition, the relation between subsurface flow and hillslope stability has been investigated. Our analyses show that the minimum safety factor (FS) occurs when the rate of subsurface flow is a maximum. In fact, by increasing the subsurface flow, stability decreases for all hillslope shapes. Copyright © 2008 John Wiley & Sons, Ltd.  相似文献   

14.
This paper reports on a study analysing the spatial distribution functions, the correlation structures, and the power spectral densities of high‐resolution LIDAR snow depths (～1 m) in two adjacent 500 m × 500 m areas in the Colorado Rocky Mountains, one a sub‐alpine forest the other an alpine tundra. It is shown how and why differences in the controlling physical processes induced by variations in vegetation cover and wind patterns lead to the observed differences in spatial organization between the snow depth fields of these environments. In the sub‐alpine forest area, the mean of snow depth increases with elevation, while its standard deviation remains uniform. In the tundra subarea, the mean of snow depth decreases with elevation, while its standard deviation varies over a wide range. The two‐dimensional correlations of snow depth in the forested area indicate little spatial memory and isotropic conditions, while in the tundra they indicate a marked directional bias that is consistent with the predominant wind directions and the location of topographic ridges and depressions. The power spectral densities exhibit a power law behaviour in two frequency intervals separated by a break located at a scale of around 12 m in the forested subarea, and 65 m in the tundra subarea. The spectral exponents obtained indicate that the snow depth fields are highly variable over scales larger than the scale break, while highly correlated below. Based on the observations and on synthetic snow depth fields generated with one‐ and two‐dimensional spectral techniques, it is shown that the scale at which the break occurs increases with the separation distance between snow depth maxima. In addition, the breaks in the forested area coincide with those of the corresponding vegetation height field, while in the tundra subarea they are displaced towards larger scales than those observed in the corresponding vegetation height field. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

15.
Parabolic dunes are widely distributed on coasts and margins of deserts and steppes where ecosystems are vulnerable and sensitive to environmental changes and human disturbances. Some studies have indicated that vegetated parabolic dunes can be activated into highly mobile barchan dunes and the catastrophic shift of eco‐geomorphic systems is detrimental to land management and social‐economic development; however, no detailed study has clarified the physical processes and eco‐geomorphic interactions that control the stability of a parabolic dune and its resistance to unfavorable environmental changes. This study utilizes the Extended‐DECAL (Discrete Eco‐geomorphic Aeolian Landscapes) model, parameterized by field measurements of dune topography and vegetation characteristics combined with remote sensing, to explore how increases in drought stress, wind strength, and grazing stress may lead to the activation of stabilizing parabolic dunes into highly mobile barchans. The modeling results suggest that the mobility of an initial parabolic dune at the onset of a perturbation determines the capacity of a system to absorb environmental change, and a slight increase in vegetation cover of an initial parabolic dune can increase the activation threshold significantly. The characteristics of four eco‐geomorphic interaction zones control the processes and resulting morphologies of the transformations. A higher deposition tolerance of vegetation increases the activation threshold of the dune transformation under both a negative climatic impact and an increased sand transport rate, whereas the erosion tolerance of vegetation influences the patterns of resulting barchans (a single barchan versus multiple barchans). The change in the characteristics of eco‐geomorphic interaction zones may indirectly reflect the dune stability and predict an ongoing transformation, whilst the activation angle may be potentially used as a proxy of environmental stresses. In contrast to the natural environmental changes that tend to affect relatively weak and young plants, grazing stress can exert a broader impact on any plant indistinctively. A small increase in grazing stress just above the activation threshold can accelerate dune activation significantly. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

16.
Regional analysis of slope stability is often constrained by availability of data. Model requirements for input data cannot be met at the desired spatial resolution because data are either site‐speci?c or non‐existent. Faced with these dif?culties it has often been the practice to assume that certain parameters are uniform throughout the area of interest. An alternative approach proposed here allows a more detailed discrimination of slope stability conditions. Based on the principles of hillslope hydrology, hydrologic information can be generated at suf?cient resolution to allow higher resolution slope stability analysis. Measurements from an instrumented network in a small area have been used to establish index‐based models for topographic and climate‐related controls of piezometric response. The ability to relate groundwater levels to rainfall and topographic parameters provides a means of up‐scaling to larger catchments and ultimately the opportunity to generate a catchment‐wide prediction of the distribution, magnitude and frequency of rainstorm‐generated groundwater levels. The example provided in this study uses the topography index of TOPMODEL in GIS to predict the spatial patterns of groundwater elevation for seasonal soil moisture conditions and given rainfall inputs. This allows modelling of catchment‐wide response of soil water to rainstorms with different return periods (representing different magnitudes), and is an essential prerequisite for a probabilistic regional slope stability analysis. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

17.
Submerged aquatic vegetation affects flow, sediment and ecological processes within rivers. Quantifying these effects is key to effective river management. Despite a wealth of research into vegetated flows, the detailed flow characteristics around real plants in natural channels are still poorly understood. Here we present a new methodology for representing vegetation patches within computational fluid dynamics (CFD) models of vegetated channels. Vegetation is represented using a Mass Flux Scaling Algorithm (MFSA) and drag term within the Reynolds‐averaged Navier–Stokes Equations, which account for the mass and momentum effects of the vegetation, respectively. The model is applied using three different grid resolutions (0.2, 0.1 and 0.05 m) using time‐averaged solution methods and compared to field data. The results show that the model reproduces the complex spatial flow heterogeneity within the channel and that increasing the resolution leads to enhanced model accuracy. Future applications of the model to the prediction of channel roughness, sedimentation and key eco‐hydraulic variables are presented, likely to be valuable for informing effective river management. © 2016 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd.  相似文献   

18.
Long‐range terrestrial laser scanning (TLS) is an emerging method for the monitoring of alpine slopes in the vicinity of infrastructure. Nevertheless, deformation monitoring of alpine natural terrain is difficult and becomes even more challenging with larger scan distances. In this study we present approaches for the handling of spatially variable measurement uncertainties in the context of geomorphological change detection using multi‐temporal data sets. A robust distance measurement is developed, which deals with surface roughness and areas of lower point densities. The level of detection (LOD), i.e. the threshold distinguishing between real surface change and data noise, is based on a confidence interval considering the spatial variability of TLS errors caused by large laser footprints, low incidence angles and surface roughness. Spatially variable positional uncertainties are modelled for each point according to its range and the object geometry hit. The local point cloud roughness is estimated in the distance calculation process from the variance of least‐squares fitted planes. Distance calculation and LOD assessment are applied in two study areas in the Eastern Alps (Austria) using multi‐temporal laser scanning data sets of slopes surrounding reservoir lakes. At Finstertal, two TLS point clouds of high alpine terrain and scanned from ranges between 300 and 1800 m are compared. At Gepatsch, the comparison is done between an airborne laser scanning (ALS) and a TLS point cloud of a vegetated mountain slope scanned from ranges between 600 and 3600 m. Although these data sets feature different conditions regarding the scan setup and the surface conditions, the presented approach makes it possible to reliably analyse the geomorphological activity. This includes the automatic detection of rock glacier movement, rockfall and debris slides, even in areas where a difference in vegetation cover could be observed. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

19.
Increased bank stability by riparian vegetation can have profound impacts on channel morphology and dynamics in low‐energy systems, but the effects are less clear in high‐energy environments. Here we investigate the role of vegetation in active, aggrading braided systems at Mount Pinatubo, Philippines, and compare results with numerical modeling results. Gradual reductions in post‐eruption sediment loads have reduced bed reworking rates, allowing vegetation to finally persist year‐round on the Pasig‐Potrero and Sacobia Rivers. From 2009–2011 we collected data detailing vegetation extent, type, density, and root strength. Incorporating these data into the RipRoot model and BSTEM (Bank Stability and Toe Erosion Model) shows cohesion due to roots increases from zero in unvegetated conditions to > 10·2 kPa in densely‐growing grasses. Field‐based parameters were incorporated into a cellular model comparing vegetation strength and sediment mobility effects on braided channel dynamics. The model shows both low sediment mobility and high vegetation strength lead to less active systems, reflecting trends observed in the field. The competing influence of vegetation strength versus channel dynamics is a concept encapsulated in a dimensionless ratio between timescales for vegetation growth and channel reworking known as T*. An estimated T* between 1·5 and 2·3 for the Pasig‐Potrero River suggests channels are still very mobile and likely to remain braided until aggradation rates decline further. Vegetation does have an important effect on channel dynamics, however, by focusing flow and thus aggradation into the unvegetated fraction of braidplain, leading to an aggradational imbalance and transition to a more avulsive state. The future trajectory of channel–vegetation interactions as sedimentation rates decline is complicated by strong seasonal variability in precipitation and sediment loads, driving incision and armoring in the dry season. By 2011, incision during the dry season was substantial enough to lower the water‐table, weaken existing vegetation, and allow for vegetation removal in future avulsions. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

20.
Cellular automaton modelling for the simulation of dune field formation and evolution has developed progressively in aeolian geomorphology in the last decade or so. A model that incorporates the effects of vegetation and its interactions with geomorphic landscape development – the Discrete Ecogeomorphic Aeolian Landscapes (DECAL) model – can replicate a number of important visual and qualitative aspects of the complex evolution of aeolian dune landscapes under the influence of vegetation dynamics in coastal environments. A key challenge in this research area is the analysis and comparison of both simulated and real‐world vegetated dune landscapes using objective and quantifiable principles. This study presents a methodological framework or protocol for numerically quantifying various ecogeomorphic attributes, using a suite of mathematically defined landscape metrics, to provide a rigorous and statistical evaluation of vegetated dune field evolution. Within this framework the model parameter space can be systematically explored and simulation outcomes can be methodically compared against real‐world landscapes. Based on a simplified scenario of parabolic dunes developing out of blow‐outs the resulting dune field realizations are investigated as a function of variable growth vigour of two simulated vegetation types (pioneer grass and successional woody shrub) by establishing a typological phase‐diagram of different landscape classes. The set of simulation outcomes furthermore defines a higher‐dimensional phase‐space, whose axes or dimensions can be interpreted by analysing how individual ecogeomorphic landscape metrics, or state variables, contribute to the data distribution. Principal component analysis can reduce this to a visual three‐dimensional (3D) phase‐space where landscape evolution can be plotted as time‐trajectories and where we can investigate the effects of changing environmental conditions partway through a simulation scenario. The use of landscape state variables and the construction of a 3D phase‐space presented here may provide a general template for quantifying many other eco‐geomorphic systems on the Earth's surface. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号