共查询到20条相似文献，搜索用时 62 毫秒
1.
2.
基于建筑性能的非结构构件抗震设计研究 总被引：2，自引：0，他引：2
针对非结构构件在地震中破坏的现象、震害情况,分析破坏原因,给出了非结构构件的抗震设防目标。基于建筑物性能的基本思想,给出了非结构构件的性能设计要求;讨论了非结构构件和附属设备的抗震设计计算原则。对建筑的非结构构件提出了相应的抗震设防技术措施,以提高其抗震能力。 相似文献
3.
单层柱面网壳弹塑性地震反应特征 总被引：12，自引：0，他引：12
本文对网壳结构的弹塑性抗震性能进行了探讨。根据结构弹性有限元理论，结合网壳结构受力特点，推导出网壳结构单元的弹塑性矩阵表达式。然后对单层柱面网壳结构的弹塑性地震反应进行了具体分析，给出了节点位移和杆件应力变化规律，并讨论了矢跨比变化对网壳弹塑性性能的影响，从而揭示出这类网壳的弹塑性地震反应特点。 相似文献
4.
抗震设计中结构的性能等级与设计性能安全指数 总被引：1，自引：0，他引：1
通常根据结构的破坏程度可以将结构的破坏划分为：基本完好、轻微破坏、中等破坏、严重破坏、倒塌等5个阶段。根据这5个阶段,本文将结构在地震过程中的性能极限状态划分为：功能连续极限状态、破坏控制极限状态、控制损失极限状态和防止倒塌极限状态,并以此作为划分结构性能等级的标准。定义结构失效概率的自然对数的负值为设计性能安全指数,通过计算结构失效概率对各构件可靠指标的一阶偏导数的方法,求出结构的设计性能安全等级。这种方法可以考虑建筑结构构件、建筑非结构构件以及其它非结构构件的性能,而且同时可以考虑结构系统总体效应的影响,因而能够比较全面地反映结构的抗震性能等级。 相似文献
5.
高层建筑结构抗震选型的智能评价方法 总被引：3，自引：0，他引：3
指出了结构整体性能实现的阶段性特征，明确了选型阶段是对结构整体性能进行规划，控制与优化等的关键环节，初步给出了从不同角度表征结构及其相关全系统。全寿命，全性能等客观需求与约束的结构选型性能模型。接着分析介绍了四种智能评价方法（即ES、FIS、ANN、ANNFIS法），给出了集成智能评价支持系统的功能结构框图，在介绍了七种Mamdani模糊推理算法的基础上，将模糊综合评价与模糊推理方法结合。给出了一种兼有两者共同优点的多输入加权模糊推理与去模糊化算法及该算法用于性能评价的过程，最后，通过基于该算法的性能评价实例，给出了结构受力合理性性能评价的七条模糊规则及输入输出参数的评价等级标准，隶属函数及其加权模糊推理的过程与结果，结果表明该方法能较好地表征与利用专家知识，经验与策略，能更好地满足结构选型多性能，多层次的性能评价需要，且评价过程与结果直观，有效。上述工作为表征，量化，控制与优化结构性能，恰当利用与改进各类结构。提高选型质量等奠定了基础。 相似文献
6.
本文针对云南洱源县振戎中学食堂钢钢筋混凝土耗能减振体系，首先建立了耗能减振结构构件的恢复力模型，其次，结合文献[10]提出的“三水准”地震损伤性能目标和文献[11]中的简化设计方法以及ＡＴＣ－４０报告中的能力谱法，对此结构在大震下的地震损伤性能进行了分析和设计验算，最后考察了耗能关振装置对结构损伤性能的控制效果。 相似文献
7.
8.
中国古建筑抗震性能分析 总被引：8，自引：4，他引：4
本文根据我国古建筑在历次地震作用下的结构破坏状况,总结了古建筑结构的震害特点,介绍了古建筑抗震性能分析方法,结合泰安市古建筑实例进行了抗震性能分析并给出了抗震性能分析结果。 相似文献
9.
10.
基于性能的碳纤维抗震加固设计 总被引：2，自引：1，他引：1
本文探讨了基于性能的加固设计的基本思路和设计过程,并给出了一个基于性能的碳纤维加固设计的工程实例,采用pushover静力推覆分析的方法分析对比了结构加固前后的性能,表明原结构的抗震性能不足,经碳纤维加固后的结构抗震性能明显提高,满足8度抗震设防烈度要求。 相似文献
11.
预制钢筋混凝土剪力墙结构抗震性能研究进展（Ⅱ）：结构性能研究 总被引：2，自引：0，他引：2
阐述了预制钢筋混凝土剪力墙结构抗震性能研究的重要性和预制钢筋混凝土剪力墙结构抗震性能研究的最新进展。综述了国内外预制钢筋混凝土剪力墙结构设计规范以及设计方法的研究进展。指出常规预制装配式钢筋混凝土剪力墙结构的抗震性能较差,在地震作用下,主要靠结构构件连接处的损伤和结构构件损坏来消耗能量;无粘结后张拉预应力预制混凝土剪力墙结构,在地震作用下具有自恢复中心能力和良好的抗震能力,但该结构体系的耗能能力不足。认为在预制钢筋混凝土剪力墙结构中设置耗能减震元件,或将预制钢筋混凝土剪力墙结构设计成隔震结构,将有效提高预制钢筋混凝土剪力墙结构的抗震性能。该类预制装配式剪力墙结构的抗震性能有待于进一步研究。 相似文献
12.
Earthquake-induced soft-sediment deformation structures in the Mesoproterozoic Wumishan Formation,North China,and their geologic implications 总被引：2，自引：0，他引：2
Soft-sediment structures are key to defining seismites. Two soft-sediment deformation horizons, bounded by undeformed carbonate strata, have been found in the Wumishan Formation in the Jumahe region, 175 km southwest of Beijing. One is in the lowest part of Wumishan Formation; and the other is in the uppermost part of Litho-member I. The soft-sediment structures in these two horizons fall into three categories: mould-and-sag structures, hydraulic shatterings and liquefaction dikes. The mould-and-sag structures are divided into two types: one developed in tidal-flat sediments, accompa-nied by many liquefaction-related structures and characterized by autochthonous post-earthquake sediments in sags, and the other type developed in deep-water environments, is not associated with liquefaction structures, and is overlain immediately by seismogenic tsunamites. The hydraulic shat-terings are composed of pockets of fluidization conglomerate, sand intrusions, and syndepositional faults. The liquefaction dikes fall into two categories: hydraulic-fracturing dikes and lateral-spreading dikes. The former are steep, planar, and pinch out upwards. The latter are snake-like and characterized by no diapir-related drag structures in surrounding rocks. Examination of the attitudes and strati-graphic positions of these structures suggests that these soft-sediment structures are seismogenic, and consequently, are seismites. Most seismites in the Wumishan Formation are developed near the former western, margin fault of Yanliao rift. This occurrence suggests that they could be related to movements on this fault. Other geological implications are discussed. 相似文献
13.
Stochastic hydrochemical structures are used to analyze the heterogeneity in the distribution of concentrations of different forms of nutrients in stratified silts. The properties of these structures are assessed. The layers with forming and decaying structures are found to alternate. The structural relationships are analyzed and their basic functions are established. 相似文献
14.
China is a country where 100% of the territory is located in a seismic zone. Most of the strong earthquakes are over prediction. Most fatalities are caused by structural collapse. Earthquakes not only cause severe damage to structures, but can also damage non-structural elements on and inside of facilities. This can halt city life, and disrupt hospitals, airports, bridges, power plants, and other infrastructure. Designers need to use new techniques to protect structures and facilities inside. Isolation, energy dissipation and, control systems are more and more widely used in recent years in China. Currently, there are nearly 6,500 structures with isolation and about 3,000 structures with passive energy dissipation or hybrid control in China. The mitigation techniques are applied to structures like residential buildings, large or complex structures, bridges, underwater tunnels, historical or cultural relic sites, and industrial facilities, and are used for retrofitting of existed structures. This paper introduces design rules and some new and innovative devices for seismic isolation, energy dissipation and hybrid control for civil and industrial structures. This paper also discusses the development trends for seismic resistance, seismic isolation, passive and active control techniques for the future in China and in the world. 相似文献
15.
二次结构常常在大震甚至中小地震中发生损坏或中断工作，急需寻找安全有效的设计方法。对一幢典型结构，考虑不同场地条件、主体结构隔震以及二次结构不同阻尼比的影响，计算各层的楼面绝对加速度与相对位移反应谱。分析表明，主体结构隔震或同时增大二次结构阻尼是取得二次结构较好减振效果的有效途径，主体结构的隔震阻尼不宜太大，主体结构隔震后二次结构对所在楼层位置的敏感性大大降低。 相似文献
16.
17.
During severe seismic events, structures designed according to current standards yield and develop inelastic deformations. While the acceleration responses are limited by the yielding strength, these structures develop permanent deformations (and possible damage) due to such yielding. Spectra developed for inelastic structures can help in determining the desired yield levels and the associated inelastic deformations. Some structures made of special materials or equipped with innovative structural systems may yield, but can recover the deformation upon unloading and, thus, may avoid permanent deformations. These structures are known as nonlinear elastic. Often the post yielding excursions are very large and may exceed their toughness (or deformability). By introducing damping in form of supplemental devices, it is possible to control such deformations and keep them within acceptable limits. Spectra for such nonlinear elastic structures and inelastic structures are developed herein, by considering both inherent and supplemental damping. The difference between the two types of damping is addressed both theoretically and numerically. Design examples of several simple structures using the newly developed spectra are presented, which illustrate the importance of lower strength and damping in these nonlinear elastic or inelastic systems. Copyright © 2013 John Wiley & Sons, Ltd. 相似文献
18.
考虑耦联影响的二次结构体系减震分析 总被引：1，自引：2，他引：1
建立了基础隔震的主次结构体系耦联运动方程，开发了动力分析程序PS—BASE．FOR，对一典型结构的二次结构绝对加速度反应谱与相对位移反应谱计算分析表明，主体结构隔震或同时增大二次结构阻尼，是取得二次结构较好抗震性能的有效途径，增大主体结构的隔震阻尼对二次结构略有不利影响。 相似文献
19.
20.
层间隔震结构作为一种新型的隔震形式,不仅可以降低上部结构的动力响应,还可以弥补基础隔震结构的不足.现有研究多集中在远场地震作用下的规则层间隔震结构.本文利用通用结构分析与设计软件SAP2000分别模拟了一幢8层带裙房钢筋混凝土框架层间隔震结构、基础隔震结构和抗震结构,分析并对比了三种结构在近场地震作用下动力响应特征.结果表明在近场条件下三种结构顶层均出现不同程度的鞭梢效应;相比抗震结构两种隔震结构具有很好的减震效果,而且基础隔震结构的减震效果好于层间隔震结构;由于结构刚度突变的部位剪力较大,所以应对其裙楼顶部予以加强. 相似文献