首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Based on the digital waveforms of Xinjiang Seismic Network, the Hutubi MS6.2 earthquake sequence (ML ≥ 1.0) was relocated precisely by HypoDD.The best double-couple focal mechanisms of the main shock and aftershocks of ML ≥ 4.0 were determined by the CAP method. We analyzed the characteristics of spatial distribution, focal mechanisms and the seismogenic structure of earthquake sequence. The results show that the main shock is located at 43.775 9°N, 86.363 4°E; the depth of the initial rupture and centriod is about 15.388km and 17km. The earthquake sequence extends unilaterally along NWW direction with an extension length of about 15km and a depth ranging 5~15km. The characteristics of the depth profiles show that the seismogenic fault plane dips northward and the faulting is dominated by thrusting. The nodal planes parameters of the best double-couple focal mechanisms are:strike 292°, dip 62° and rake 80° for nodal plane I, and strike 132°, dip 30° and rake 108° for nodal plane Ⅱ, indicating that the main shock is of thrust faulting. The dip of nodal planeⅠis consistent with the dip of the depth profile, which is inferred to be the fault plane of seismogenic fault of this earthquake. According to the comprehensive analysis of the relocation results, the focal mechanism and geological structure in the source region, it is preliminarily inferred that the seismogenic structure of the Hutubi MS6.2 earthquake may be a backthrust on the deeper concealed thrust slope at the south of Qigu anticline. The earthquake is a "folding" earthquake taking place under the stress field of Tianshan expanding towards the Junggar Basin.  相似文献   

2.
Based on the phase report of Xinjiang Seismic Network, the Hutubi MS6.2 earthquake sequence ML ≥ 1.0 was relocated by the HypoDD method. The results show that the aftershocks were distributed along NE and NW direction. The aftershocks were in the depths of 5~15km. In addition, by using the digital waveforms of Xinjiang Seismic Network, the best double-couple focal mechanism of the main shock and some aftershocks of MS ≥ 3.8 were determined by the CAP method. Based on the above studies, the source depth, focal mechanism and aftershock distribution of the Hutubi MS6.2 earthquake were analyzed and the seismogenic structure was discussed. The nodal plane parameters of the best double-couple focal mechanism are strike 144°, dip 26°, rake 118°, and strike 293°, dip 67°, rake 77°, respectively. The moment magnitude MW is about 5.9, with centroid depth of 15.2km. These show that the main shock was a thrust type. Most focal mechanism solutions of the aftershocks were shown as a thrust type, which are similar to the main shock. It is speculated that the possible seismogenic fault of this earthquake is the Huorgosi-Manas-Tugulu Fault.  相似文献   

3.
Using the digital broadband seismic data recorded by Xinjiang network stations, we obtained focal mechanism of the July 3 Pishan, Xinjiang, MS6.5 earthquake with generalized Cut and Paste(gCAP)inversion method. The strike, dip and rake of first nodal plane are 97°, 27°, 51°, and the second nodal plane are 318°, 70°, 107°. The centroid depth and moment magnitude are calculated to be 12km and 6.4. Combining with the distribution of aftershocks, we conclude that the first nodal plane is the seismogenic fault, and the main shock presents a thrust earthquake at low angle. We relocated 1014 earthquakes using the double-difference algorithm, and finally obtained 937 relocated events. Our results show that the earthquake sequences clearly demonstrate a unilateral extension about 50km nearly in NWW direction, and are mainly located above 25km depth, especially the small earthquakes are predominately located at the shallow parts. Furthermore, the focal depth profile shows a southwestward dipping fault plane at the main shock position, suggesting listric thrust faulting, which is consistent with the dip of the mainshock rupture plane. The spatial distribution of aftershocks represents that the Tarim block was thrust under the West Kunlun orogenic belt. In addition, the dip angle of the fault plane gradually increases along the NWW direction, possibly suggesting a gradual increase of strike-slip component during the NWW rupturing process. From above, we conclude that the Pishan MS6.5 earthquake is the result of Tibet plateau pushing onto the Tarim block from south to north, which further confirms that the continuous collision of India plate and Eurasia plate has strong influence on the seismic activity in and around the Tibet plateau.  相似文献   

4.
The Wulong MS5.0 earthquake on 23 November 2017, located in the Wolong sap between Wenfu, Furong and Mawu faults, is the biggest instrumentally recorded earthquake in the southeastern Chongqing. It occurred unexpectedly in a weak earthquake background with no knowledge of dramatically active faults. The complete earthquake sequences offered a significant source information example for focal mechanism solution, seismotectonics and seismogenic mechanism, which is helpful for the estimation of potential seismic sources and level of the future seismic risk in the region. In this study, we firstly calculated the focal mechanism solutions of the main shock using CAP waveform inversion method and then relocated the main shock and aftershocks by the method of double-difference algorithm. Secondly, we determined the seismogenic fault responsible for the MS5.0 Wulong earthquake based on these calculated results. Finally, we explored the seismogenic mechanism of the Wulong earthquake and future potential seismic risk level of the region. The results show the parameters of the focal mechanism solution, which are:strike24°, dip 16°, and rake -108° for the nodal plane Ⅰ, and strike223°, dip 75°, and rake -85° for the nodal plane Ⅱ. The calculations are supported by the results of different agencies and other methods. Additionally, the relocated results show that the Wulong MS5.0 earthquake sequence is within a rectangular strip with 4.7km in length and 2.4km in width, which is approximately consistent with the scales by empirical relationship of Wells and Coppersmith(1994). Most of the relocated aftershocks are distributed in the southwest of the mainshock. The NW-SE cross sections show that the predominant focal depth is 5~8km. The earthquake sequences suggest the occurrence features of the fault that dips northwest with dip angle of 63° by the least square method, which is largely consistent with nodal planeⅡof the focal mechanism solution. Coincidentally, the field outcrop survey results show that the Wenfu Fault is a normal fault striking southwest and dipping 60°~73° by previous studies. According to the above data, we infer that the Wenfu Fault is the seismogenic structure responsible for Wulong MS5.0 earthquake. We also propose two preliminary genetic mechanisms of "local stress adjustment" and "fluid activation effect". The "local stress adjustment" model is that several strong earthquakes in Sichuan, such as M8.0 Wenchuan earthquake, M7.0 Luzhou earthquake and M7.0 Jiuzhaigou earthquake, have changed the stress regime of the eastern margin of the Sichuan Basin by stress transference. Within the changed stress regime, a minor local stress adjustment has the possibility of making a notable earthquake event. In contract, the "fluid activation effect" model is mainly supported by the three evidences as follows:1)the maximum principle stress axial azimuth is against the regional stress field, which reflects NWW-SEE direction thrusting type; 2)the Wujiang River crosscuts the pre-existing Wenfu normal fault and offers the fluid source; and 3)fractures along the Wenfu Fault formed by karst dissolution offer the important fluid flow channels.  相似文献   

5.
At 3:05, September 4, 2017, an ML4.4 earthquake occurred in Lincheng County, Xingtai City, Hebei Province, which was felt obviously by surrounding areas. Approximately 60km away from the hypocenter of Xingtai MS7.2 earthquake in 1966, this event is the most noticeable earthquake in this area in recent years. On the one hand, people are still shocked by the 1966 Xingtai earthquake that caused huge disaster, on the other hand, Lincheng County is lack of strong earthquakes. Therefore, this quake has aroused widespread concerns by the government, society and seismologists. It is necessary to clarify whether the seismogenic structure of this event is consistent with the previous seismicity and whether it has any new implications for the seismic activity and seismic hazard in this region. Therefore, it is of great significance to study its seismogenic mechanism for understanding the earthquake activity in Xingtai region where a MS7.2 earthquake had occurred in 1966. In this study, the Lincheng earthquake and its aftershocks are relocated using the multi-step locating method, and the focal mechanism and focal depth are determined by the "generalized Cut and Paste"(gCAP)method. The reliability of the results is analyzed based on the data of Hebei regional seismic network. In order to better constrain the focal depth, the depth phase sPL fitting method is applied to the relocation of focal depth. The inversion and constraint results show that aftershocks are mainly distributed along NE direction and dip to SE direction as revealed by depth profiles. Focal depths of aftershocks are concentrated in the depths of 6.5~8.2km with an average of about 7km. The best double-couple solution of the mainshock is 276°, 69° and -40° for strike, dip and slip angle for nodal plane I and 23°, 53° and -153° for nodal plane Ⅱ, respectively, revealing that it is a strike-slip event with a small amount of normal-fault component. The initial rupture depth of mainshock is about 7.5km obtained by the relocation while the centroid depth is 6km derived from gCAP method which was also verified by the seismic depth phase sPL observed by several stations, indicating the earthquake is ruptured from deep to shallow. Combined with the research results on regional geological structure and the seismic sequence relocation results, it is concluded that the nodal plane Ⅱ is the seismogenic fault plane of this earthquake. There are several active faults around the hypocenter of Lincheng earthquake sequence, however, none of the known faults on the current understanding is completely consistent with the seismogenic fault. To determine the seismogenic mechanism, the lucubrated research of the MS7.2 Xingtai earthquake in 1966 could provide a powerful reference. The seismic tectonic characteristics of the 1966 Xingtai earthquake sequence could be summarized as follows:There are tensional fault in the shallow crust and steep dip hidden fault in the middle and lower crust, however, the two faults are not connected but separated by the shear slip surfaces which are widely distributed in the middle crust; the seismic source is located between the hidden fault in the lower crust and the extensional fault in the upper crust; the earthquake began to rupture in the deep dip fault in the mid-lower crust and then ruptured upward to the extensional fault in the shallow crust, and the two fault systems were broken successively. From the earthquake rupture revealed by the seismic sequence location, the Lincheng earthquake also has the semblable feature of rupturing from deep to shallow. However, due to the much smaller magnitude of this event than that of the 1966 earthquake, the accumulated stress was not high enough to tear the fracture of the detachment surface whose existence in Lincheng region was confirmed clearly by the results of Lincheng-Julu deep reflection seismology and reach to the shallower fault. Therefore, by the revelation of the seismogenic mechanism of the 1966 Xingtai earthquake, the seismogenic fault of Lincheng earthquake is presumed to be a concealed fault possessing a potential of both strike-slip and small normal faulting component and located below the detachment surface in Lincheng area. The tectonic significance indicated by this earthquake is that the event was a stress adjustment of the deep fault and did not lead to the rupture of the shallow fault. Therefore, this area still has potential seismic hazard to a certain extent.  相似文献   

6.
利用南北地震带南段密集流动地震台阵的观测数据,采用波形互相关方法拾取Pn波走时,应用滑动时窗相关法识别sPn震相,通过sPn与Pn震相之间的走时差测定了芦山地震序列中28个ML4.0级以上余震的震源深度.结果表明,震源深度集中在10~20 km范围内,垂直余震带的北西-南东向震源深度剖面揭示,余震分布表现出西深东浅的特点,倾角大约为39°.这些余震在空间上具有较好的线性分布特征,推测可能发生在与主震有关的破裂面上或邻近位置,由此推测主震的破裂面倾角大约为39°.根据余震的空间分布特征,认为芦山地震的发震断层并非双石-大川断裂,可能是其东侧的一条隐伏断层.  相似文献   

7.
2012年6月30日新疆维吾尔自治区新源-和静县交界发生MS6.6地震,该地震是2010年青海玉树7.1级地震和2013年4月20日四川芦山7.0级地震之间中国大陆发生的最大的地震.本文基于新疆数字地震台网记录的此次地震序列震相资料,分别用绝对和相对定位方法联合对其进行重新定位,重新定位后余震展布为NW向,主震位置为43.429°N,84.755°E,深度为21.8 km.基于新疆地震台网记录6.6级地震波形数据,本文用CAP方法反演了震源机制解和震源深度.结果显示：MS6.6地震震源机制解：节面Ⅰ走向39°,倾角46°,滑动角12°,节面Ⅱ走向301°,倾角81°,滑动角135°;震源深度为21 km,与利用地震震相到时确定的主震震源深度基本一致.主震震源机制解的节面Ⅱ与伊犁盆地北缘断裂走向和倾角基本一致,综合精确定位余震展布和伊犁盆地北缘断裂性质分析认为,新源-和静MS6.6地震发震构造是伊犁盆地北缘断裂,震源深度为21 km左右,是一个高角的内陆倾滑地震.  相似文献   

8.
2015年7月3日皮山6.5级地震发震构造初步研究   总被引：11，自引：1，他引：10       下载免费PDF全文
李金  王琼  吴传勇  向元 《地球物理学报》2016,59(8):2859-2870
基于新疆区域数字地震台网记录,采用CAP（Cut and Paste）方法反演了2015年7月3日皮山6.5级主震和部分MS3.6以上余震的震源机制解和震源深度;采用HypoDD方法重新定位了序列中ML2.5以上地震序列的震源位置,并利用小震分布和区域应力场拟合了可能存在的发震断层面参数.基于上述研究,综合分析了皮山6.5级地震序列的震源深度、震源机制和震源破裂面特征,探讨可能的发震构造.结果显示,利用CAP方法得到的最佳双力偶机制解节面I：走向280°/倾角60°/滑动角90°;节面Ⅱ：走向100°/倾角30°/滑动角90°,矩心深度19 km,表明该地震为一次逆冲型地震事件.大部分MS3.6以上余震震源机制与主震具有一定的相似性.双差定位结果显示,ML2.5以上的余震序列主要分布在主震的西南方向,深度主要分布在0～15 km范围内,余震分布显示出与发震构造泽普隐伏断裂一致的倾向南西的特征.利用小震分布和区域应力场拟合得到发震断层参数为走向104°/倾角34°/滑动角94°,该结果与主震震源机制解中节面Ⅱ的滑动角较为接近,绝大多数余震发生在断层面附近10 km左右的区域.根据本研究得到的震源机制、精定位结果以及利用小震分布和区域应力场拟合得到的断层面的参数,结合震源区地质构造情况,初步给出了此次皮山6.5级地震的发震模式.  相似文献   

9.
陈晨  胥颐 《地球物理学报》2013,56(12):4028-4036
利用四川省地震台网的震相数据和双差定位方法对芦山MS7.0级地震及其余震序列进行了精确定位,根据余震分布确定了发震断层的位置和断层面的几何特征,并对余震活动进行了分析.结果显示,芦山MS7.0级地震的震中位于30.28°N、102.99°E,震源深度为16.33 km.余震沿发震断层向主震两侧延伸,主要分布在长约32 km、宽约15~20 km、深度为5~24 km的范围内.地震破裂带朝西南方向扩展范围较大,东北方向略小,余震震级随时间迅速衰减.震源深度剖面清晰地显示出发震断层的逆冲破裂特征,推测发震断层为大川—双石断裂东侧约10 km的隐伏断层.该断层走向217°、倾向北西,倾角约45°,产状与大川—双石断裂相比略缓,它们同属龙门山前山断裂带的叠瓦状逆冲断层系.受发震断裂影响,部分余震沿大川—双石断裂分布,西北方向的余震延伸至宝兴杂岩体的东南缘,与汶川地震的破裂带之间存在50 km左右的地震空区,有可能成为未来发生强震的潜在危险区.  相似文献   

10.
刘建明  李金  姚远  聂晓红  滕海涛 《地震》2020,40(1):52-61
基于新疆区域数字地震台网震相观测报告, 采用双差定位方法对2019年新疆疏附MS5.1地震序列ML≥1.0地震进行重定位, 采用CAP波形反演方法, 获得了主震的震源机制解和震源矩心深度, 进而综合分析了本次地震可能的发震构造。 结果表明, 疏附5.1级地震震源位置为39.59°N, 75.57°E, 初始破裂深度为18 km, 震源矩心深度为18 km。 重定位后的地震序列呈两个优势方向展布, 分别为NEE向和NE向分支, NEE向为主要的余震优势分布区域, 呈长约13 km窄带状分布在喀什断裂附近。 另一条优势分布为沿NE向长度约9 km, 这可能与喀什断裂阶区有关。 深度剖面显示, 地震震源深度主要集中分布在8~20 km。 沿NEE走向深度剖面显示, 疏附5.1级地震破裂于深部, 余震沿优势分布的震源深度自SWW向NEE呈现逐渐加深的变化特征。 垂直于震中优势分布的深度剖面显示, 本次地震发震断层面倾向为N倾。 震源机制解显示本次地震断错类型为逆冲型, 结合震源深度剖面特征推断节面Ⅰ为本次地震的发震断层面。 综合地震序列空间分布特征、 震源机制以及震源区地质资料, 推测此次地震的发震构造可能为喀什断裂, 余震向浅部扩展。  相似文献   

11.
2016年1月21日01时13分13.0秒（北京时间），青海省海北州门源县发生MS6.4地震.为了更好地认识这次地震的发震构造，本文利用青海省地震台网和甘肃省地震台网的省级固定地震台站及部分流动地震台站记录到的波形资料，通过重新拾取震相和联合HYPOINVERSE 2000与HypoDD定位方法，对2016年1月21日青海门源地震序列ML≥1.8的189个地震事件进行了重新定位，并采用gCAP方法分别反演了主震的双力偶机制解和全矩张量解. 定位结果显示，主震位置为37.67°N、101.61°E，震源深度为11.98 km；余震序列展布方向为SE和NW两个方向、长度约16 km，震源深度优势分布为4~14 km，断层面倾向为SW方向. 利用gCAP方法得到的矩心深度在8~9 km之间. 结合野外地质调查结果，认为该次地震事件为一次逆冲型事件，其发震断层可能为北西向冷龙岭断裂与北西向民乐—大马营断裂之间的一条盲断层，推测由于印度板块与欧亚板块的碰撞挤压使得青藏高原北缘与阿拉善地块之间的东西向挤压而造成的断层应力失稳，从而形成门源地震.  相似文献   

12.
On November 18, 2017, a MS6.9 earthquake struck Mainling County, Tibet, with a depth of 10km. The earthquake occurred at the eastern Himalaya syntaxis. The Namche Barwan moved northward relative to the Himalayan terrane and was subducted deeply beneath the Lhasa terrane, forming the eastern syntaxis after the collision of the Indian plate and Asian plates. Firstly, this paper uses the far and near field broadband seismic waveform for joint inversion (CAPJoint method)of the earthquake focal mechanism. Two groups of nodal planes are obtained after 1000 times Bootstrap test. The strike, dip and rake of the best solution are calculated to be 302°, 76° and 84° (the nodal plane Ⅰ)and 138°, 27° and 104° (the nodal plane Ⅱ), respectively. This event was captured by interferometric synthetic aperture radar (InSAR)measurements from the Sentinel-1A radar satellite, which provide the opportunity to determine the fault plane, as well as the co-seismic slip distribution, and assess the seismic hazards. The overall trend of the deformation field revealed by InSAR is consistent with the GPS displacement field released by the Gan Wei-Jun's team. Geodesy (InSAR and GPS)observation of the earthquake deformation field shows the northeastern side of the epicenter uplifting and the southwestern side sinking. According to geodetic measurements and the thrust characteristics of fault deformation field, we speculate that the nodal plane Ⅰ is the true rupture plane. Secondly, based on the focal mechanism, we use InSAR data as the constraint to invert for the fine slip distribution on the fault plane. Our best model suggests that the seismogenic fault is a NW-SE striking thrust fault with a high angle. Combined with the slip distribution and aftershocks, we suggest that the earthquake is a high-angle thrust event, which is caused by the NE-dipping thrust beneath the Namche Barwa syntaxis subducted deeply beneath the Lhasa terrane.  相似文献   

13.
A MS6.0 earthquake with shallow focal depth of 16km struck Changning County, Yibin City, Sichuan Province at 22:55: 43(Beijing Time)on 17 June 2019. Although the magnitude of the earthquake is moderate, it caused heavy casualties and property losses to Changning County and its surrounding areas. In the following week, a series of aftershocks with MS≥4.0 occurred in the epicentral area successively. In order to better understand and analyze the seismotectonic structure and generation mechanism of these earthquakes, in this paper, absolute earthquake location by HYPOINVERSE 2000 method is conducted to relocate the main shock of MS6.0 in Changning using the seismic phase observation data provided by Sichuan Earthquake Administration, and focal mechanism solutions for Changning MS6.0 main shock and MS≥4.0 aftershocks are inferred using the gCAP method with the local and regional broadband station waveforms recorded by the regional seismic networks of Sichuan Province, Yunnan Province, Chongqing Municipality, and Guizhou Province. The absolute relocation results show that the epicenter of the main shock is located at 28.35°N, 104.88°E, and it occurred at an unusual shallow depth about only 6.98km, which could be one of the most significant reasons for the heavier damage in the Changning and adjoining areas. The focal plane solution of the Changning MS6.0 earthquake indicates that the main shock occurred at a thrust fault with a left-lateral strike-slip component. The full moment tensor solution provided by gCAP shows that it contains a certain percentage of non-double couple components. After the occurrence of the main shock, a series of medium and strong aftershocks with MS≥4.0 occurred continuously along the northwestern direction, the fault plane solutions for those aftershocks show mostly strike-slip and thrust fault-type. It is found that the mode of focal mechanism has an obvious characteristic of segmentation in space, which reflects the complexity of the dislocation process of the seismogenic fault. It also shows that the Changning earthquake sequences occurred in the shallow part of the upper crust. Combining with the results from the seismic sounding profile in Changning anticline, which is the main structure in the focal area, this study finds that the existence of several steep secondary faults in the core of Changning anticline is an important reason for the diversity of focal mechanism of aftershock sequences. The characteristics of regional stress field is estimated using the STRESSINVERSE method by the information of focal mechanism solutions from our study, and the results show that the Changning area is subject to a NEE oriented maximum principal stress field with a very shallow dipping and near-vertical minimum principal stress, which is not associated with the results derived from other stress indicators. Compared with the direction of the maximum principal compressive stress axis in the whole region, the direction of the stress field in the focal area rotates from the NWW direction to the NEE direction. The Changning MS6.0 earthquake locates in the area with complex geological structure, where there are a large number of small staggered fault zones with unstable geological structure. Combining with the direction of aftershocks distribution in Changning area, we infer that the Changning MS6.0 earthquake is generated by rupturing of the pre-existing fault in the Changning anticline under the action of the overall large stress field, and the seismogenic fault is a high dip-angle thrust fault with left-lateral strike-slip component, trending NW.  相似文献   

14.
赵博  高原  黄志斌  赵旭  李大虎 《地球物理学报》2013,56(10):3385-3395
2013年4月20日发生了四川芦山MS7.0地震,主震中位于青藏地块与华南地块结合部的龙门山断裂带南端.本研究用双差定位法对芦山地震主震及余震序列进行重新定位,得到主震位置为(30.29°N,102.97°E,17.82 km)及4100多次余震重新定位结果.利用GSN/IRIS台网和国家台网及四川省区域台网的波形数据对主震及部分余震进行了震源机制解反演.结果表明,主震为一次逆冲地震,根据余震序列分布确定发震断层面走向为200°,震源机制解断层倾角为45°.基于震源断层面解和断层滑动方向,采用力轴张量计算法得到了研究区域的平均主压应力方向约为N112°E.  相似文献   

15.
On two velocity models, the HypoDD method is used to accurately locate the Tongliao M5.3 earthquake sequence, then the CAP method is used to invert the focal mechanism solutions. The parameters of the seismogenic fault plane are fitted quantitatively by the small earthquake distribution and the regional stress field. The geometry, rupture features and possible seismogenic structure of the Tongliao M5.3 earthquake are comprehensively determined. The HypoDD relocation results show that this earthquake is located at 42.95°N, 122.37°E, the whole sequence trends in NW and major aftershocks (ML ≥ 3.0) strike in NEE direction. With the time elapsed, the aftershocks extended to the shallow crust gradually. Comparing the focal mechanism solutions and relocation results, we determine that the fitted causative fault based on NNW-trending aftershock distribution is reliable, which has the top left corner (43.00°N, 122.35°E, depth 3.3km), lower left corner (43.00°N, 122.35°E, depth 8.9km), upper right corner (42.92°N, 122.37°E, depth 3.3km), lower right corner (42.92°N, 122.37°E, depth 8.9km), extending range 3km×7km, trending in 349° (NNW), dip angle 86° (nearly vertical), and slip angle 15°. It is inferred that whole process of main shock rupture is from the source to the NW and SE sides as a shear. The rupture degree is larger in southeast where the late rupture concentrated, and did not reach the surface.  相似文献   

16.
芦山7.0级地震序列的震源位置与震源机制解特征   总被引：7，自引：0，他引：7       下载免费PDF全文
基于中国国家和四川区域数字地震台网记录,采用HypoDD方法精确定位了四川芦山ML2.0级以上地震序列的震源位置,采用CAP方法反演了36次ML4.0级以上地震的最佳双力偶震源机制解,并利用小震分布和区域应力场拟合了可能存在的发震断层面参数,从而综合分析了芦山地震序列的震源深度、震源机制和震源破裂面特征,探讨可能的发震构造.结果显示,7.0级主震的震源位置为30.30°N、102.97°E,初始破裂深度为15 km左右,震源矩心深度为14 km左右,最佳双力偶震源机制解的两组节面分别为走向209°/倾角46°/滑动角94°和走向23°/倾角44°/滑动角86°,可视为纯逆冲型地震破裂,绝大多数ML4.0级以上余震的震源机制也表现出与主震类似的逆冲破裂特征.ML2.0级以上余震序列发生在主震两侧,集中分布的长轴为30 km左右,震源深度主要集中在5～27 km,ML3.5级以上较大余震则集中分布在9～25 km的深度上,并揭示出发震断层倾向北西的特征.利用小震分布和区域应力场拟合得到发震断层参数为走向207°/倾角50°/滑动角92°,绝大多数余震发生在断层面附近10 km左右的区域.综合地震序列分布特征、主震震源深度和已有破裂过程研究结果,可以推测主震破裂过程自初始点沿断层的两侧扩展破裂,南侧破裂比北侧稍长,滑动量主要集中在初始破裂点附近,可能没有破裂到地表.综合本文研究成果、地震烈度分布和现有的科学考察结果,初步推测发震构造为龙门山山前断裂,也不排除主震震中东侧还存在一条未知的基底断裂发震的可能性.  相似文献   

17.
本文采用双差定位方法对云南鲁甸MS6.5地震震后16天的地震序列进行重定位研究.重定位结果显示,主震位于27.11°N,103.35°E,震源深度约15 km;地震序列主要呈“L”形优势分布,分为SSE向和近EW向两支,并均呈现近垂直的震源分布特征,显示此次地震为走滑型,并存在两个不同方向的破裂面.虽然此次地震发生于NE向昭通断裂及其反冲断裂（龙树断裂、大岩洞断裂）附近,但这些断裂均为逆冲型断裂,被排除了作为发震断裂的可能性;鲁甸地震发生在呈放射性分布的多条断裂的交汇部位,SSE向破裂分支与包谷垴断裂的方向一致,近EW向破裂分支与小河断裂南端的走向一致. 鲁甸地震可能已将包谷垴断裂和小河断裂在深部贯通.  相似文献   

18.
On October 17, 2014, a MS6.6 earthquake occurred in Jinggu, Yunnan. The epicenter was located in the western branch of Wuliang Mountain, the northwest extension line of Puwen Fault. There are 2 faults in the surrounding area, one is a sinistral strike-slip and the other is the dextral. Two faults have mutual intersection with conjugate joints property to form a checkerboard faulting structure. The structure of the area of the focal region is complex. The present-day tectonic movement is strong, and the aftershock distribution indicates the faulting surface trending NNW. There is no obvious surface rupture related to the known fault in the epicenter, and there is a certain distance from the surface of the Puwen fault zone. Regional seismic activity is strong. In 1941, there were two over magnitude 7.0 earthquakes in the south of the epicenter of Jinggu County and Mengzhe Town. In 1988, two mainshock-aftershock type earthquakes occurred in Canglan-Gengma Counties, the principal stress axes of the whole seismic area is in the direction of NNE. Geological method can be adopted to clarify the distribution of surficial fracture caused by active faults, and high-precision seismic positioning and spatial distribution characteristics of seismic sequences can contribute to understand deep seismogenic faults and geometric features. Thus, we can better analyze the three-dimensional spatial distribution characteristics of seismotectonics and the deep and shallow tectonic relationship. The focal mechanism reveals the property and faulting process to a certain extent, which can help us understand not only the active property of faults, but also the important basis for deep tectonic stress and seismogenic mechanism. In order to study the fault characteristic of the Jinggu earthquake, the stress field characteristics of the source area and the geometric parameters of the fault plane, this paper firstly uses the 15 days aftershock data of the Jingsuo MS6.6 earthquake, to precisely locate the main shock and aftershock sequences using double-difference location method. The results show that the aftershock sequences have clustering characteristics along the NW direction, with a depth mainly of 5~15km. Based on the precise location, calculations are made to the focal mechanisms of a total of 46 earthquakes including the main shock and aftershocks with ML ≥ 3.0 of the Jinggu earthquake. The double-couple(DC)component of the focal mechanism of the main shock shows that nodal plane Ⅰ:The strike is 239°, the dip 81°, and the rake -22°; nodal plane Ⅱ, the strike is 333°, the dip 68°, and the rake -170.31°. According to focal mechanism solutions, there are 42 earthquakes with a focal mechanism of strike-slip type, accounting for 91.3%. According to the distribution of the aftershock sequence, it can be inferred that the nodal plane Ⅱ is the seismogenic fault. The obtained focal mechanism is used to invert the stress field in the source region. The distribution of horizontal maximum principal stress orienation is concentrated. The main features of the regional tectonic stress field are under the NNE-SSW compression(P axis)and the NW-SE extension(T axis)and are also affected by NNW direction stress fields in the central region of Yunnan, which indicates that Jinggu earthquake fault, like Gengma earthquake, is a new NW-trending fault which is under domination of large-scale tectonic stress and effected by local tectonic stress environment. In order to define more accurately the occurrence of the fault plane of the Jinggu earthquake, with the precise location results and the stress field in the source region, the global optimal solution of the fault plane parameters and its error are obtained by using both global searching simulated annealing algorithm and local searching Gauss-Newton method. Since the parameters of the fault plane fitting process use the stress parameters obtained by the focal mechanism inversion, the data obtained by the fault plane fitting is more representative of the rupture plane, that is, the strike 332.75°, the dip 89.53°, and the rake -167.12°. The buried depth of the rupture plane is 2.746km, indicating that the source fault has not cut through the surface. Based on the stress field characteristics and the inversion results of the fault plane, it is preliminarily believed that the seismogenic structure of the Jinggu earthquake is a newly generated nearly vertical right-lateral strike-slip fault with normal component. The rupture plane length is about 17.2km, which does not extend to the Puwen fault zone. Jinggu earthquake occurred in Simao-Puer seismic region in the south of Sichuan-Yunnan plate. Its focal mechanism solution is similar to that of the three sub-events of the Gengma earthquake in November 1988. The seismogenic structure of both of them is NW-trending and the principal stress is NE-SW. The rupture plane of the Jinggu main shock(NW direction)is significantly different from the known near NS direction Lancang Fault and the near NE direction Jinggu Fault in the study area. It is preliminarily inferred that the seismogenic structure of this earthquake has a neogenetic feature.  相似文献   

19.
基于首都圈数字地震台网的宽频带资料，首先采用CAP方法确定了永清MS4.3地震和廊坊MS3.0地震的震源机制解:永清地震节面Ⅰ的走向、倾角和滑动角分别为52°，62°和?140°，节面Ⅱ的走向、倾角和滑动角分别为300°，55°和?35°；廊坊地震节面I的走向、倾角和滑动角分别为48°，57°和?147°，节面Ⅱ的走向、倾角和滑动角分别为299°，63°和?38°。两次地震的震源机制解较为一致，推测它们可能具有相同的发震断层。利用近震转换波获得两次地震的震源深度，分别为19 km和13 km。利用双差法对两次地震的主余震进行重新定位，结果显示:两个地震序列的震中均呈NE向分布，余震震源深度均浅于主震震源深度，震源深度分别集中在17—20 km和12—13 km范围内，两个序列的短轴剖面揭示了震源分布均呈现倾向SE，倾角陡立的特点。将地震序列的分布与震源机制解的结果进行对比，认为两个序列的水平展布方向与其对应的主震震源机制解中节面Ⅰ的走向比较接近，深度分布的高倾角特征也与节面Ⅰ比较相似，因此认为发震断层面均为节面Ⅰ。通过将震源机制解中节面Ⅰ的参数和地震序列的分布与区域活动断层的产状性质进行比较，取得了一些关于发震构造和地震成因的重要认识:① 永清MS4.3地震和廊坊MS3.0地震的发震构造不是上地壳的先存正断裂?河西务断裂，不排除与中下地壳的新生构造或深大断裂有关；② 永清、廊坊地震发生在13—19 km深度上，结合地壳结构、断裂构造以及区域流变结构等资料，推测该深度范围可能是廊固凹陷的壳内脆性?韧性转换区域，是地震孕育和发生的有利构造部位。   相似文献   

20.
The Hutubi MS6.2 earthquake of December 8, 2016 is a pure thrust event in the northern Tianshan thrust fold belt. The earthquake occurred between the Qigu Fault and the Junggar southern margin fault, which are both thrust faults. Based on mobile gravity measurements from 2013 to 2018 in the northern Tianshan, the gravity net adjustment was accomplished using Urumqi absolute gravity observation point as the datum, and the absolute gravity value of surface observation points were obtained. In order to eliminate the seasonal effect on gravity variation, the paper uses the observation data in May per annual as studying objects and obtains the temporal-spatial dynamic evolution images of gravity field differences in the northern Tianshan at different time scales as well as the time series of gravity variation of some points in the adjacent area of the epicenter. The characteristics of regional gravity variation before and after the Hutubi MS6.2 earthquake on December 8, 2016 and their relations are analyzed systematically. The results show that: 1)The gravity variations in the study area are dramatic in generally, and the contours of gravity variation are consistent with the main faults basically. There was a four-quadrant distribution near the epicenter before the earthquake, and the Hutubi MS6.2 earthquake occurred near the center of the four-quadrant distribution and at the turn of the gravity variation contour. The three years' cumulative gravity variation before the earthquake and the gravity variation after the earthquake are inversed, and the variation amplitudes are equivalent, suggesting that the MS6.2 earthquake has released the stress and the energy accumulated before the earthquake. 2)This paper focuses on the analysis of gravity variation at the observation points on both sides of the Junggar southern margin fault near the epicenter. Regional gravity variation and gravity time series show that gravity variations at the same side of the Junggar southern margin fault are basically consistent, however, gravity variations at the different sides of the Junggar southern margin fault are different from each other obviously, indicating the difference of material migration laws in different structural regions. In addition, the strain energy accumulated in the epicenter is basically released after the earthquake, and the area nearby the epicenter tends to be stable. 3)The Hutubi MS6.2 earthquake occurred near the center of the four-quadrant and at the turn of the high-gradient zone of gravity variation, reflecting the location of strong earthquake is related to the distribution of four-quadrant of regional gravity variation, the high-gradient zone of regional gravity variation and its turn. It has a unique advantage in determining the location of strong earthquake using gravity variation results. The regional spatial-temporal gravity variation before the earthquake is manifested as a systematic evolution process of “steady state→regional gravity anomaly→four-quadrant distribution→earthquake occurring in the reverse process”. Studying the temporal-spatial evolution characteristics of gravity field before and after Hutubi MS6.2 earthquake has important practical significance for understanding the occurrence law of large earthquakes and capturing the precursory information of earthquakes.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号