共查询到20条相似文献，搜索用时 125 毫秒
1.
2.
利用区域尺度双差层析成像方法,使用2009年1月至2017年2月的近震资料,对青藏高原东北缘及其邻区内记录到的地震事件进行震源位置和三维速度结构的联合反演.重新定位后震源空间位置得到明显改善,浅层的地震波速与地形和沉积层厚度对应较好,研究区地震主要发生在河西走廊过渡带的低泊松比区域.本文将研究区分为五个区域并分别对其层析成像结果进行了讨论,结果显示研究区不同地块之间地壳结构变化明显,地壳物质整体呈酸性,青藏高原东北缘地壳增厚可能主要发生在中下地壳. 相似文献
3.
传统地震定位方法利用震源轨迹确定震源位置，但基于均匀或横向均匀介质模型必然导致定位误差。为此对传统方法进行改进，发展适用于三维复杂地壳速度模型的地震定位交切法。利用最小走时树射线追踪技术，以离散方式准确计算三维复杂地壳速度模型中的震源轨迹，将震源定位于震源轨迹交汇的密集点。将该方法应用于云南地区地震重定位，得到较高定位精度。 相似文献
4.
利用2002年1月至2008年12月天津地震台网产出的初至P波走时资料,通过震源与速度结构联合反演算法,计算出天津及邻近地区三维P波速度结构的优化模型,同时获得1 738次中小地震的重新定位结果.结果表明,天津及邻近地区中小地震分布具有与强震相同的地壳深部介质背景,主要分布在高低速度过渡带;天津及邻近地区中小地震震源深度重新定位后更集中分布在10-15 km深度范围内. 相似文献
5.
6.
利用山东区域地震数字台网提供的数据,通过三维层析成像方法结合山东地质构造实际情况,对山东区域进行联合走时反演地壳速度结构,获得该区分辨率较高的三维速度结构图像。结果表明：不同深度上的速度分布反映出山东地区深部构造的某些重要信息,为进一步研究该区的活动构造及地震参数计算提供科学依据。在地壳速度结构与中强地震活动的关系上,再次显示出中强震多发生在速度结构高速单元与低速单元的过渡带附近,说明中强震的孕育与震源区周围介质的不均匀性有关。 相似文献
7.
8.
本文结合1992年01月至2012年10月国家地震台网、四川地震台网、云南地震台网及重庆地震台网的65个台站记录到的2,107个地震的17,945条P波绝对到时数据及227,701条P波相对到时数据,利用双差地震层析成像方法联合反演了昭通地区地震震源参数及地壳三维速度结构.反演结果表明,地震重定位精度有了显著改进,地震在水平方向的重定位精度要高于垂直方向.在深度方向,消除了重定位前地震在5~10km间的层状分布假象,昭通地区震源深度总体大于彝良地区,且彝良地区地震随深度增加向西展布,根据余震分布特征推测地震发生在走向NNE,倾向NW的石门断裂上.反演得到的三维速度结构表明,地表速度异常与地形起伏及地质特征有着密切关系:在浅层,昭通坳陷盆地表现为较大范围的低速异常,且低速异常区在盆地东北缘范围加深.彝良附近表现为高速异常带,大关附近表现为低速异常.随着深度的增加,反演得到的P波三维速度结构清晰地显示出彝良地区中下地壳介质受到北东向挤压而向上隆起,与浅部的高、低速异常区相互交错,形成介质速度构造复杂区域.重定位后的彝良ML5.7级和ML5.6级地震的震源位于隆起的高速异常区两侧的速度过渡区,其走滑兼逆冲的破裂机制与该处反演结果揭示的彝良地区下方的速度异常形成机制较为一致. 相似文献
9.
10.
水力压裂是页岩气开发过程中的核心增产技术,微地震则广泛用于压裂分析、水驱前缘监测和储层描述.微地震反演过程中,用于反演的速度模型往往基于测井、地震或标定炮资料构建,忽略了压裂过程中裂缝及孔隙流体压力变化对地层速度的影响.本文首先基于物质守恒、渗流理论和断裂力学模拟三维水力压裂过程,得到地下裂缝发育特征和孔隙压力分布.继而根据Coates-Schoenberg方法和裂缝柔量参数计算裂缝和孔隙压力对速度场的影响,得到压裂过程中的实时速度模型.最后利用三维射线追踪方法正演微地震走时和方位信息,并采用常规微地震定位方法反演震源位置及进行误差分析.数值模拟结果表明,检波器空间分布影响定位精度,常规方法的定位误差随射线路径在压裂带中传播距离增加而变大,且不同压裂阶段的多点反演法与单点极化法精度相当. 相似文献
11.
本文使用甘肃、青海数字地震台网及中国地震科学探测台阵记录到的门源地区地震的P波和S波到时资料，应用双差层析成像方法联合反演了该地区的地壳三维速度结构和震源位置参数.结合地质构造背景，研究了门源MS6.4地震孕育发生的深部介质环境及该地区速度结构与地震活动性之间的关系.结果表明：反演之后地震的走时残差均方根显著降低，重定位后的地震在垂直方向上呈现出与断层位置有关的条带状分布.门源地区地壳速度结构存在明显的不均匀性，浅层P波和S波速度结构与地表地质构造及地形特征密切相关.研究区内地震活动性与地壳速度结构具有很强的对应关系，地震主要分布在高速异常区域及其边缘.门源MS6.4地震震中附近的P波和S波速度结构表现出明显的高速异常，且在震源区下方存在P波低速层，这种特殊的构造条件可能是导致此次地震发生的重要原因. 相似文献
12.
Lupei Zhu Ying Tan Donald V. Helmberger Chandan K. Saikia 《Pure and Applied Geophysics》2006,163(7):1193-1213
We use the recordings from 51 earthquakes produced by a PASSCAL deployment in Tibet to develop a two-layer crustal model for
the region. Starting with their ISC locations, we iteratively fit the P-arrival times to relocate the earthquakes and estimate mantle and crustal seismic parameters. An average crustal P velocity of 6.2–6.3 km/s is obtained for a crustal thickness of 65 km while the P velocity of the uppermost mantle is 8.1 km/s. The upper layer of the model is further fine-tuned by obtaining the best synthetic
SH waveform match to an observed waveform for a well-located event. Green's functions from this model are then used to estimate
the source parameters for those events using a grid search procedure. Average event relocation relative to the ISC locations,
excluding two poorly located earthquakes, is 16 km. All but one earthquake are determined by the waveform inversion to be
at depths between 5 and 15 km. This is 15 km shallower, on average, than depths reported by the ISC. The shallow seismicity
cut-off depth and low crustal velocities suggest high temperatures in the lower crust. Thrust faulting source mechanisms dominate
at the margins of the plateau. Within the plateau, at locations with surface elevations less than 5 km, source mechanisms
are a mixture of strike-slip and thrust. Most events occurring in the high plateau where elevations are above 5 km show normal
faulting. This indicates that a large portion of the plateau is under EW extension. 相似文献
13.
使用阻尼最小二乘法进行震源参数和地壳三维速度结构的走时联合反演．所用资料为Ｓ波和Ｐ波到时差,并用人工地震资料的二维解释结果作为三维速度模型的特定约束条件．为建立初始模型,又利用天然地震构成了准二维剖面．在走时反演基础上,利用遗传算法进行了几个地震事件的波形反演尝试,并对走时反演获得的地壳速度结构模型的局部进行了修正．以３４°～４２°Ｎ,９４°～１１２°Ｅ作为研究区域,在该区域中收集了１９８６年以来大量地震的Ｓ波和Ｐ波到时差资料,７条人工地震二维速度剖面资料和２个数字化地震台的几个地震的三分向记录资料．对这些资料进行了处理,最后得出了０～２５ｋｍ深度不同截面的速度分布,并对所得结果进行了分析． 相似文献
14.
For faster and more robust ray tracing in 1-D velocity models and also due to the lack of reliable 3-D models, most seismological centers use 1-D models for routine earthquake locations. In this study, as solution to the coupled hypocenter-velocity problem, we compute a regional P-wave velocity model for southern Iran that can be used for routine earthquake location and also a reference initial model for 3-D seismic tomography. The inversion process was based on travel time data from local earthquakes paired reports obtained by merging the catalogues of Iranian Seismic Center (IRSC, 6422 events) and by the Broadband Iranian National Seismic Network (BIN, 4333 events) for southern Iran in the period 2006 through July 2017. After cleaning the data set from large individual reading errors and by identifying event reports from both networks belonging to same earthquake (a process called event pairing), we obtained a data set of 1115 well-locatable events with a total number of 24,606 P-wave observations. This data set was used to calculate a regional minimum 1-D model for southern Iran as result of an extensive model search by trial-and-error process including several dozens of inversions. Significantly different from previous models, we find a smoothly increasing P-velocity by depth with velocities of 5.8 km/s at shallow and velocities of 6.4 km/s at deepest crustal levels. For well-locatable events, location uncertainties are estimated in the order of ±?3 km for epicenter and double this uncertainty for hypocentral depth. The use of the minimum 1-D model with appropriate station delays in routine hypocenter location processing will yield a high-quality seismic catalogue with consistent uncertainty estimates across the region and it will also allow detection of outlier observations. Based on the two catalogues by IRSC and BIN and using the minimum 1-D model and station delays for all stations in the region, we established a new combined earthquake catalogue for southern Iran. While the general distribution of the seismicity corresponds well with that of the two individual catalogues by IRSC and BIN, the new catalogue significantly enhances the correlation of seismicity with the regional fault systems within and between the major crustal blocks that as an assembly build this continental region. Furthermore, the unified seismic catalogue and the minimum 1-D model resulting from this study provide important ingredients for seismic hazard studies. 相似文献
15.
根据大震速报和快速预警实际需要,首先对Inglada线性单事件定位方法进行了适当的改进, 使其在仅有P波到时数据的情况下也能快速定位,且求解过程仅需简单迭代而不用奇异值分解; 其次, 尝试将改进后的方法从单层均匀模型引入到分层均匀模型中的近源台网定位情形,并通过单层均匀和分层均匀两种不同模型的理论实验讨论了该方法的可行性和适用范围; 最后整合了质量高且分布较好的距离2008年汶川MS8.0地震震中最近的强震、微震, 以及川西流动台阵等观测记录资料,对汶川MS8.0主震初始破裂点的时空参数进行了多种模型的定位实验. 结果表明, 改进后的线性单事件定位方法简单、快捷、易用,可广泛应用于近源地震定位,尤其是用于无法得到S波到时的中强以上直至巨大地震的速报、地震现场流动台网的快速定位以及地震的快速预警等. 相似文献
16.
重庆荣昌诱发地震区精细速度结构及2010年M_L5.1地震序列精确定位 总被引：1，自引：0，他引：1
根据重庆市地震台网和流动地震台网记录到的天然地震资料,利用接收函数反演得到荣昌地区的精细一维速度结构。在此基础上用双差定位法对2010年9月10日重庆荣昌M_L5.1地震序列进行了精定位。结果表明,地震定位精度得到极大提高,震中分布与区域地质构造的关系更加清晰。多数地震集中在主要断层附近并呈条带状分布,震源深度集中在2km附近,与主要储藏层及注水井深度吻合,初步认为该地震序列为注水活动所诱发的构造地震活动。文中获得的精准的速度结构及地震空间分布对于进一步深入研究震区深部地质构造特征、注水诱发地震的机理等具有重要意义。 相似文献
17.
利用三维不分块地震层析成像技术对北京东北部地区的三维人工地震莫霍反射波走时数据进行反演,得到了该区上地壳的三维P波、S波慢度及波速比结构图像,三种结构不同深度的切片图像揭示出慢度和波速比分布有呈北东向和北西向展布的特征.断裂活动引起沉积不均匀造成现今的速度分布,地震大多分布在波速比较低的块体内,说明地震不仅与断裂活动有关,有可能还与物质结构和性质相关;北京地区上地壳速度结构、断裂活动和物质性质三者之间存在密切关系. 相似文献
18.
Ｉｎｔｒｏｄｕｃｔｉｏｎ３－Ｄｓｅｉｓｍｉｃｔｏｍｏｇｒａｐｈｙｈａｓｂｅｅｎａｐｐｌｉｅｄｔｏｖａｒｉｏｕｓｇｅｏｐｈｙｓｉｃａｌｐｒｏｂｌｅｍｓ．ＡｋｉａｎｄＬｅｅ（１９７６）ａｎｄＨａｗｌｅｙｅｔａｌ．（１９８１）ｉｎｖｅｒｔｅｄ３－Ｄｍｏｄｅ... 相似文献
19.
-- The seismic records from significant earthquakes are profoundly affected by 3-D variations in crustal structure both in the source zone itself and in propagation to some distance. Even in structurally complex zones such as Japan and Mexico relatively coherent arrivals are found associated with different classes of propagation paths. The presence of strong lateral variations can disrupt the arrivals, and impose significant variations in propagation characteristics for different directions from the source as illustrated by observations for the 1995 Kobe and 2000 Tottori-ken Seibu earthquakes in western Japan. Such effects can be modelled in 3 dimensions using a hybrid scheme with a pseudospectral representation for horizontal coordinates and finite differences in depth. This arrangement improves parallel implementation by minimising communication costs. For a realistic 3-D model for the structure in western Japan the 3-D simulations to frequencies close to 1 Hz provide a good representation of the observations from subduction zones events such as the 1946 Nankai earthquake and the 2000 Tottori-ken Seibu earthquake. The model can therefore be used to investigate the pattern of ground motion expected for future events e.g., in current seismic gaps. 相似文献
20.
Seismic tomography is one of the main tools to explore the interior of the earth.In this study,the quasi-waveform seismic tomographic method is used for the first time to reveal the crustal structures in the capital region of China.3-D highresolution V_P,V_S and the Poisson’s ratio models are generated by inverting 29839 direct P-and 29972 direct S-wave traveltimes selected from 3231 local earthquakes.The results reveal strong crustal heterogeneities.The velocity anomalies at shallow depths are well consistent with surface geologic structures.The relatively low-velocity anomaly layer in the middle crust may be the result of multiple phases of tectonic activity.Earthquakes generally occurred on the boundaries of high-and low-velocity and Poisson’s ratio anomalies.There are obvious low-velocity anomalies below the hypocenters of the Tangshan earthquake and the historical Sanhe-Pinggu earthquake,implying the existence of fluids.The similar velocity structures around the hypocenters of the two earthquakes indicate that the occurrences of the two earthquakes may be related to the same mechanism.The highresolution velocity models provide important observational constraints on the small-scale heterogeneities and dynamic mechanism of the crust in the capital region of China. 相似文献