共查询到20条相似文献，搜索用时 125 毫秒
1.
为了研究铅阻尼器在超高层结构中的耗能减震效果,采用非线性分析软件PERFORM-3D对超高层结构进行了罕遇地震作用下的有限元分析,对比了不同地震波作用下的结构弹塑性分析结果。分析结果表明:设置铅阻尼器的超高层建筑结构的抗震性能有了很大的提高,在罕遇地震作用下能够满足"大震不倒"的性能要求。研究为铅阻尼器在超高层结构中的应用提供了成功的工程案例,其设计思路可以为超高层结构的减震控制提供有益的借鉴和参考。 相似文献
2.
3.
粘弹性阻尼器对建筑结构非线性地震反应的控制 总被引：12，自引：1，他引：11
粘弹性阻尼器是抗震被动控制中一十分有效的耗能减震装置,本文４推导了粘弹性阻尼器和斜支撑的组合间单元刚度矩阵,并建立了在罕遇地震作用下,设置粘弹性阻尼器斜支撑的钢筋混凝土框架结构非线性地震反应时程分析的方法。 相似文献
4.
5.
6.
薄弱层设置耗能阻尼器支撑的钢框架模型振动台试验 总被引：2，自引：0，他引：2
设计制作了一个五层钢框架模型,在其第一层、第三层和第五层薄弱层分别设置摩擦阻尼器、粘弹性阻尼器和粘弹性-摩擦阻尼器等三种耗能阻尼器支撑,进行了罕遇地震和多遇地震下的振动台试验。试验结果表明,耗能阻尼器支撑能够有效地控制结构的地震反应。 相似文献
7.
某超高层钢管混凝土框架-混凝土核心筒结构因指标超限在设计中采用了耗能减震技术,为了检验该减震结构的抗震性能,制作了1/35的缩尺模型,通过在钢管混凝土框架设置阻尼器或不设置阻尼器,进行模拟地震振动台对比试验,研究了模型结构的动力特性和不同烈度地震作用下的加速度、位移和应变响应。研究结果表明:地震作用下,该钢管混凝土框架-混凝土核心筒减震结构与钢管混凝土框架-混凝土核心筒结构相比,位移、加速度和应变响应均有一定程度的降低;罕遇地震作用下,通过设置耗能减震构件,层间位移角最大值从超过规范要求的1/84减低至满足规范要求的1/130,表明该减震结构具有更优良的抗震性能。 相似文献
8.
《地震工程与工程振动》2016,(5)
预制装配式结构是未来建筑结构发展趋势,但是其整体抗震性能是装配式结构的薄弱环节。因此,将作者提出的剪切型软钢阻尼器设置于实际预制装配式钢筋混凝土高层剪力墙结构的连梁中部,以此提高整体结构抗震性能。该文基于ABAQUS有限元软件平台,提出一种可以有效模拟该软钢阻尼器剪切性能的连接单元,将其应用于该装配整体式剪力墙结构中,进行有限元建模和弹塑性时程分析,通过对比减震前后结构的相关地震反应,分析结构在罕遇地震作用下的减震效果。分析结果表明,设置阻尼器的减震结构,损伤连梁的数量明显减少,连梁阻尼器具有良好的耗能性能,层间位移角、结构损伤、基底反力均有所有减小。因此,采用这种软钢阻尼器可以提高装配整体式剪力墙结构的整体抗震性能。 相似文献
9.
由于受制于计算机软件中的消能减震单元,目前尚无较适用的静力分析方法应用于消能减震结构在多遇地震和罕遇地震下的结构分析。有关含消能减震部件的结构分析,主要以动力时程分析和动力弹塑性时程分析方法为主,因此具有较大的难度和需要很长的分析时间。为了推进结构消能减震于工程项目上的应用,缩短分析上的繁杂程序,依据《建筑抗震设计规范》,配合美国FEMA 356规范,提出一套消能减震结构在多遇地震下的等值线性分析方法和在罕遇地震下的静力非线性推覆分析方法（pushover analysis）。此方法适用于位移型阻尼器和防屈曲支撑,不但可使消能减震结构的结构分析简化,并可避免计算机软件的限制,且在不含阻尼器元素的计算机软件上,依然可做消能减震结构在多遇地震和罕遇地震下的结构分析。并介绍了此分析方法在消能减震结构的结构分析中的应用,以证明其可行性。 相似文献
10.
本文以某公共建筑改造工程为背景,针对改造过程中存在的大量梁、柱承载力不足,且主控参数超限等问题,提出了在框架结构中适当位置增设黏滞阻尼器的加固方案,使改造后的结构形成消能减震体系,减小地震作用。采用有限元软件分析了加固方案下结构在多遇和罕遇地震作用下的时程反应,研究了消能减震效果。结果表明,经加固改造后,各主控参数均可满足现行规范要求,大幅度提高了罕遇地震作用下结构抗震性能;通过合理设置黏滞阻尼器,减小了地震作用,大幅度缩小了梁、柱加固范围。 相似文献
11.
带耗能腋撑竖向不规则短肢剪力墙结构减震性能分析 总被引：2，自引：0，他引：2
在不影响建筑使用空间前提下,提出在抗侧构件不连续处设置耗能腋撑以改善竖向不规则结构抗震性能。以底部大空间短肢剪力墙结构为研究对象,利用大型通用有限元程序ETABS研究耗能器类型与场地土对耗能腋撑工作性能和竖向不规则结构受力性能的影响。研究表明,黏滞型耗能腋撑对文中分析模型各楼层地震反应有较好的控制效果,对转换层处层间位移角与层剪力最大值减幅最大,分别为40.14%和15.66%,对顶层加速度与基底剪力峰值的最大减幅分别为16.06%和23.57%,黏滞型耗能腋撑最大能耗散输入结构能量的42%,而黏弹型耗能腋撑对结构的控制效果不理想;当地震震级较大、震中距较小时,耗能腋撑对坚硬与软弱场地土的模型结构控制作用相差不大,减震位移比在转换层处达到最小值0.76;随着震级减小或震中距增大,耗能腋撑对该模型结构的控制作用随场地土变硬而逐渐增强,其减震位移比介于0.68～0.74之间。 相似文献
12.
The primary purpose of this research is to improve the seismic response of a complex asymmetric tall structure using viscoelastic(VE) dampers. Asymmetric structures have detrimental effects on the seismic performance because such structures create abrupt changes in the stiffness or strength that may lead to undesirable stress concentrations at weak locations. Structural control devices are one of the effective ways to reduce seismic impacts, particularly in asymmetric structures. For passive vibration control of structures, VE dampers are considered among the most preferred devices for energy dissipation. Therefore, in this research, VE dampers are implemented at strategic locations in a realistic case study structure to increase the level of distributed damping without occupying significant architectural space and reducing earthquake vibrations in terms of story displacements(drifts) and other design forces. It has been concluded that the seismic response of the considered structure retrofitted with supplemental VE dampers corresponded well in controlling the displacement demands. Moreover, it has been demonstrated that seismic response in terms of interstory drifts was effectively mitigated with supplemental damping when added up to a certain level. Exceeding the supplemental damping from this level did not contribute to additional mitigation of the seismic response of the considered structure. In addition, it was found that the supplemental damping increased the total acceleration of the considered structure at all floor levels, which indicates that for irregular tall structures of this type, VE dampers were only a good retrofitting measure for earthquake induced interstory deformations and their use may not be suitable for acceleration sensitive structures. Overall, the research findings demonstrate how seismic hazards to these types of structures can be reduced by introducing additional damping into the structure. 相似文献
13.
相对传统结构,自复位墙结构在地震作用下具有更大的变形能力且几乎无残余位移,但其耗能能力较弱,需采用附加阻尼来增加整体耗能.目前,金属阻尼器已广泛用于自复位墙结构,其可显著减小结构大震下的地震响应,但小震下的位移和加速度减震效果不佳.因此,将小变形下即可耗能的黏弹性阻尼器应用于自复位墙结构中.设计一幢10层自复位墙结构,分别采用黏弹性阻尼器和 U 型金属阻尼器作为附加耗能构件,通过弹塑性时程分析对比采用两种耗能机制的结构地震响应.结果表明,黏弹性阻尼器可显著减小自复位墙结构在小震下的位移和加速度响应;U 型金属阻尼器在中震下开始耗能,在大震和巨震下,其减震效果会超越黏弹性阻尼器.因此,为进一步优化自复位墙结构在不同水准地震作用下的抗震性能,建议结合阻尼器的特点进行合理设计. 相似文献
14.
针对某型钢混凝土框支剪力墙高层建筑结构高宽比过大、竖向刚度不规则等问题,采用耗能减震技术,在转换层与避难层处设置黏滞阻尼器,采用ETABS进行非线性动力时程分析,研究黏滞阻尼器对型钢混凝土框支剪力墙结构的地震和风荷载控制作用,提高型钢混凝土转换构件的抗震性能。研究结果表明,在不同地震动作用下黏滞阻尼器均能有效地降低型钢混凝土框支剪力墙结构的地震响应,结构峰值位移和最大层间位移角的减幅分别介于3%～45%和2%～43%,而黏滞阻尼器耗散总输入能量比例最高达73.65%;在风荷载时程作用下,结构各控制楼层的峰值位移减幅介于1%～11%之间。 相似文献
15.
近年来,民用航空制造业的快速发展给大柱距空间网架结构带来新的契机。本文针对某大柱距厂房设计了无柱间支撑、柱间钢支撑和柱间消能支撑3种抗侧力结构体系。在此基础上,分别建立了3种结构体系的三维整体有限元模型,通过优化设计确立了钢支撑和消能支撑的具体设计参数,并进行了多遇地震作用下的弹性时程对比分析。最后,建立了结构弹塑性分析的纤维模型,对3种结构体系进行了罕遇地震作用下的弹塑性时程分析,对比研究了3种结构体系在大震作用下的倒塌机制。结果表明：采用纤维模型能够较为精确地进行结构的弹塑性时程分析;相较于不加柱间支撑结构体系,柱间钢支撑和柱间消能支撑结构体系在多遇地震作用下的结构层间位移分别衰减约32%和64%,在罕遇地震作用下的结构层间位移分别衰减约12%和46%,且均具有更好的倒塌机制。本文可供大柱距空间结构的设计与分析参考和借鉴。 相似文献
16.
17.
Seismic retrofitting of reinforced concrete frame structures using GFRP-tube-confined-concrete composite braces 总被引：1，自引：1，他引：0
Nasim S.Moghaddasi B 《地震工程与工程振动(英文版)》2012,11(1):91-105
This paper presents a new type of structural bracing intended for seismic retrofitting use in framed structures. This special composite brace,termed glass-fiber-reinforced-polymer(GFRP)-tube-confined-concrete composite brace,is comprised of concrete confined by a GFRP tube and an inner steel core for energy dissipation.Together with a contribution from the GFRP-tube confined concrete,the composite brace shows a substantially increased stiffness to control story drift, which is often a preferred feature in seismic retrofitting.An analysis model is established and implemented in a general finite element analysis program-OpenSees,for simulating the load-displacement behavior of the composite brace.Using this model,a parametric study of the hysteretic behavior(energy dissipation,stiffness,ductility and strength)of the composite brace was conducted under static cyclic loading and it was found that the area ratio of steel core to concrete has the greatest influence among all the parameters considered.To demonstrate the application of the composite brace in seismic retrofitting, a three-story nonductile reinforced concrete(RC)frame structure was retrofitted with the composite braces.Pushover analysis and nonlinear time-history analyses of the retrofitted RC frame structure was performed by employing a suite of 20 strong ground motion earthquake records.The analysis results show that the composite braces can effectively reduce the peak seismic responses of the RC frame structure without significantly increasing the base shear demand. 相似文献
18.
某周期比超限偏心结构地震反应控制分析 总被引：1，自引：0，他引：1
本文以周期比超限的某偏心结构工程为研究背景,基于SAP2000建立三维有限元模型,采用黏滞阻尼器、黏弹性阻尼器、软钢阻尼器、复合铅黏弹性阻尼器和钢支撑五种减震方案对其进行扭转控制,针对不同扭转控制方案分别进行了模态分析、反应谱分析和动力时程分析,对比研究了多遇地震作用下各控制方案的周期比、层间位移、支撑内力及阻尼器的耗能能力。研究表明:五种控制方案均具有有效抑制结构扭转振动响应的能力,降低结构的最大层间位移角,并使之满足规范要求;后四种控制方案能明显减小结构的周期比,将结构第一扭转反应控制在第三振型;对于此类偏心结构体系的扭转振动控制,本文建议阻尼器设置应尽量远离刚度中心,以达到最佳扭转控制效果。 相似文献
19.
Buckling is usually conceived as an unstable structural behavior leading to lateral instability of axially loaded members, if not properly supported. However, a pre‐bent strip would become an excellent seismic energy‐dissipative device if it is deformed in a guided direction and range. Geometrically large lateral deformation of the steel strips in buckling leads to inelastic behavior of the material and dissipates energy as a consequence. The purpose of this study is to propose a new type of seismic damper in the form of braces based on pre‐bent steel strips. The nonlinear elastic stiffness of monotonously loaded pre‐bent strips in both compression and tension is derived. The energy‐dissipative characteristics of the proposed damping device are investigated via component tests under cyclic loads. Experimental results indicate that the force–displacement relationship of pre‐bent strips in cyclic loads exhibits mechanical characteristics of displacement‐dependent dampers. A series of seismic performance tests has been conducted further to verify the feasibility and effectiveness of using the proposed device as seismic dampers. Encouraging test results have been obtained, suggesting feasibility of the proposed device for earthquake‐resistant design. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
20.
The effectiveness of hysteretic passive devices to protect and mitigate the response of a structure under seismic loading is well established by both analytical and experimental research. Nevertheless, a systematic and well‐established methodology for the topological distribution and size of these devices in order to achieve a desired structural response performance does not exist. In this paper, a computational framework is proposed for the optimal distribution and design of yielding metallic buckling restrained braces (BRB) and/or friction dampers within steel moment‐resisting frames (MRF) for a given seismic environment. A Genetic Algorithm (GA) is used to solve the resulting discrete optimization problem. Specific examples involving two three‐story, four‐bay steel MRFs and a six‐story, three‐bay steel MRF retrofitted with yielding and/or friction braces are considered. The seismic environment consists of four synthetic ground motions representative of the west coast of the United States with 5% probability of exceedance in 50 years. Non‐linear time‐history analyses are employed to evaluate the potential designs. As a result of the evolutionary process, the optimal placement, strength and size of the dampers are obtained throughout the height of the steel MRF. Furthermore, the developed computational approach for seismic design based upon GAs provides an attractive procedure for design of MRFs with hysteretic passive dampers. Copyright © 2009 John Wiley & Sons, Ltd. 相似文献