首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 140 毫秒
1.
This paper describes a commonly used pseudo-static method in seismic resistant design of the cross section of underground structures. Based on dynamic theory and the vibration characteristics of underground structures, the sources of errors when using this method are analyzed. The traditional seismic motion loading approach is replaced by a method in which a one-dimensional soil layer response stress is differentiated and then converted into seismic live loads. To validate the improved method, a comparison of analytical results is conducted for internal forces under earthquake shaking of a typical shallow embedded box-shaped subway station structure using four methods: the response displacement method, finite element response acceleration method, the finite element dynamic analysis method and the improved pseudo-static calculation method. It is shown that the improved finite element pseudo-static method proposed in this paper provides an effective tool for the seismic design of underground structures. The evaluation yields results close to those obtained by the finite element dynamic analysis method, and shows that the improved finite element pseudo-static method provides a higher degree of precision.  相似文献   

2.
Study on the severest real ground motion for seismic design and analysis   总被引:1,自引:0,他引:1  
How to select the adequate real strong earthquake ground motion for seismic analysis and design of trucures is an essential problem in earthquake engineering research and practice.In the paper the concept of the severest design ground motion is proposed and a method is developed for comparing the severity of the recorded strong ground motions.By using this method the severest earthquake ground motions are selected out as seismic inputs to the structures to be designed from a database that consists of more than five thousand significant strong ground moton records collected over the world.The selected severest ground motions are very likely to be able to drive the structures to their critical response and thereby result in the highest damage potential.It is noted that for different structures with diffferent predominant natural periods and at different sites where structures are located the severest design ground motions are usually different.Finally.two examples are illustrated to demonstrate the rationality of the concept and the reliability of the selected design motion.  相似文献   

3.
This paper analyzes the seismicity in Bohai Sea,introducing a shape factor K to characterize the seismic risk distribution in sub-regions of the sea. Based on the seismic design ground motions for 46 platforms located in the Bohai Sea,a statistical analysis was performed for different peak ground acceleration (PGA) ratios at two different probability levels. In accordance with the two-stage design method,a scheme of two seismic design levels is proposed,and two seismic design objectives are established respectively for the strength level earthquake and the ductility level earthquake. By analogy with and comparison to the Chinese seismic design code for buildings,it is proposed that the probability level for the strength level earthquake and ductility level earthquake have a return period of 200 and 1000 - 2500 years,respectively. The validity of these proposed values is discussed. Finally,the PGAs corresponding to these two probability levels are calculated for different sub-regions of the Bohai Sea.  相似文献   

4.
Using the records of 3,069 regional earthquake events from the Fujian Digital Seismic Network from October 2008 to December 2015,in which the magnitude of each of the events was measured by at least six stations,statistics are taken on the deviation between the magnitude of a single station and the average magnitude of the network. It is found that the magnitudes average deviation of each station is-0. 31-0. 68. Statistics are also taken for the period corresponding to the maximum amplitude of the record measured in each station for calculating the magnitude,and the dominant period gained is 0. 06s-0. 38s; site response of each seismic station is inverted using the Moya method,and it is found that the site response of 98 stations is in the bands of 1-20 Hz,suggesting that the site has an amplifying or suppressing effect on the signals in certain frequency bands;Considering the site response corresponding to the inherent 0. 8s period of the WoodAnderson pendulum seismograph,and comparing the magnitude deviation caused by the site response corresponding to the dominant period time of each station with the average magnitude deviation, we obtain that there is a good linear relationship between the magnitude deviation from the dominant period site response and the average deviation of the magnitude of each station,indicating that the magnitude deviation of a single station has a close relationship with the site response of the period corresponding to the maximum amplitude measured for calculating the magnitude.  相似文献   

5.
Collapse assessment of steel moment frames using endurance time method   总被引:1,自引:1,他引:0  
In endurance time(ET) method structures are subjected to a set of predesigned intensifying excitations. These excitations are produced in a way that their response spectrum, while complying with a specifi ed spectrum, intensifi es with time so they can be used approximately to simulate the average effects of several ground motions scaled to different intensities. In this paper applicability of the ET method for evaluating collapse potential of buildings is investigated. A set of four steel moment frames is used for collapse assessment. The process of using ET method in collapse evaluation is explained and the results are compared with incremental dynamic analysis(IDA) results. It is shown that although the computational effort using the ET method is much less than the IDA analysis, the results of both methods are consistent. Finally collapse fragility curves using ET and IDA methods are produced and it is shown that the probabilities of collapse in different hazard levels are also consistent.  相似文献   

6.
The joint probability density fimction (PDF) of different structural responses is a very important topic in the stochastic response analysis of nonlinear structures. In this paper, the probability density evolution method, which is successfully developed to capture the instantaneous PDF of an arbitrary single response of interest, is extended to evaluate the joint PDF of any two responses. A two-dimensional partial differential equation in terms of the joint PDF is established. The strategy of selecting representative points via the number theoretical method and sieved by a hyper-ellipsoid is outlined. A two-dimensional difference scheme is developed. The free vibration of an SDOF system is examined to verify the proposed method, and a flame structure exhibiting hysteresis subjected to stochastic ground motion is investigated. It is pointed out that the correlation of different responses results from the fact that randomness of different responses comes from the same set of basic random parameters involved. In other words, the essence of the probabilistic correlation is a physical correlation.  相似文献   

7.
A simplified multisupport response spectrum method is presented.The structural response is a sum of two components of a structure with a first natural period less than 2 s.The first component is the pseudostatic response caused by the inconsistent motions of the structural supports,and the second is the structural dynamic response to ground motion accelerations.This method is formally consistent with the classical response spectrum method,and the effects of multisupport excitation are considered for any modal response spectrum or modal superposition.If the seismic inputs at each support are the same,the support displacements caused by the pseudostatic response become rigid body displacements.The response spectrum in the case of multisupport excitations then reduces to that for uniform excitations.In other words,this multisupport response spectrum method is a modification and extension of the existing response spectrum method under uniform excitation.Moreover,most of the coherency coefficients in this formulation are simplified by approximating the ground motion excitation as white noise.The results indicate that this simplification can reduce the calculation time while maintaining accuracy.Furthermore,the internal forces obtained by the multisupport response spectrum method are compared with those produced by the traditional response spectrum method in two case studies of existing long-span structures.Because the effects of inconsistent support displacements are not considered in the traditional response spectrum method,the values of internal forces near the supports are underestimated.These regions are important potential failure points and deserve special attention in the seismic design of reticulated structures.  相似文献   

8.
The dynamic shear modulus for three types of undisturbed soil under different consolidation ratios is presented by using the resonant column test method. Its effects on surface ground motion is illustrated by calculation. The test results indicate that the power function is a suitable form for describing the relationship between the ratio of the maximum dynamic shear modulus due to anisotropic and isotropic consolidations and the increment of the consolidation ratio. When compared to sand, the increment of the maximum dynamic shear modulus for undisturbed soil due to anisotropic consolidation is much larger. Using a one-dimensional equivalent linearization method, the earthquake influence factor and the characteristic period of the surface acceleration are calculated for two soil layers subjected to several typical earthquake waves. The calculated results show that the difference in nonlinear properties due to different consolidation ratios is generally not very notable, but the degree of its influence on the surface acceleration spectrum is remarkable for the occurrence of strong earthquakes. When compared to isotropic consolidation, the consideration of actual anisotropic consolidation causes the characteristic period to decrease and the earthquake influence factor to increase.  相似文献   

9.
Pseudo-offset migration (POM) is a new method for prestack time migration of converted waves that improves on equivalent-offset migration (EOM). The mapping of POM is different than EOM but the purpose of the two methods is to map the input samples to the common conversion scatter point (CCSP) gathers. This paper introduces the principles of the two migration methods and model parameter sensitivity tests for both POM and EOM. At large offset-to-depth ratios the hyperbolic approximation, the three-term approximation and the double square root (DSR) equation are used to NMO-correct the mapped POM gathers to obtain more accurate migration velocities. These equations were derived and calculated by small pseudo offset. POM is then used to image complex structure and prestack time migration.  相似文献   

10.
The increasing strength of new structural materials and the span of new structures,accompanied by aesthetic requirements for greater slenderness,are resulting in more applications of long-span structures.In this paper,serviceability control technology and its design theory are studied.First,a novel tuned mass damper(TMD)with controllable stiffness is developed.Second,methods for modeling human-induced loads are proposed,including standing up,walking,jumping and running,and an analysis method for long-span floor response is proposed based on a finite element model.Third,a design method for long-span floors installed with a multiple TMD(MTMD)system considering human comfort is introduced, largely based on a study of existing literature.Finally,a design,analysis and field test is conducted using several large scale buildings in China including the Beijing Olympic Park National Conference Center,Changsha New Railway Station and the Xi’an Northern Railway Station.The analytical and field test results show that the MTMD system designed using the proposed method is capable of effectively mitigating the vertical vibration of long-span floor structures.The study presented in this paper provides an important reference for the analysis of vibration serviceability of similar long-span floors and design of control system for these structures.  相似文献   

11.
现有的设定地震方法主要有两种:加权平均法和最大概率法。本文首先简要介绍了这两种方法,然后以烟台地区一高层建筑为研究对象,分别采用加权平均法和最大概率法进行地震危险性分析,确定出设定地震震级、震中距以及具体空间位置,给出了两种方法的设定地震反应谱,最后对这两种方法所得结果的差异进行了对比和分析。结果表明:加权平均法所得反应谱将长周期处的安全性考虑在内,适用于中长周期建(构)筑物;最大概率法由于其长周期处谱值偏低,会增加长周期工程的危险性,不宜用于长周期工程,但对短周期建(构)筑物应用合理;对于自振周期不同的建筑工程应选用不同的地震危险性分析方法进行设计反应谱的确定。  相似文献   

12.
随着地下空间大规模开发利用,地震灾害对其造成的潜在威胁不容忽视。基于《城市轨道交通结构抗震设计规范(GB50909-2014)》和《地下铁道建筑结构抗震设计规范(DG/TJ08-2064-2009)》建议的分析方法,选取惯性力法、反应位移法(国家规范法、上海规范法)、动力时程方法(线弹性方法、等效线性化方法)三类共5种计算方法,以典型两层双柱三跨地铁车站结构为分析对象进行地震反应的对比验算,对上述计算方法的适应性进行评价。分析结果表明,与动力时程方法相比较,惯性力法计算得到的侧墙剪力值偏大,中柱结果较为接近;对于反应位移法,国家规范方法和上海规范方法的计算模型略有不同,但两者计算结果基本相近,其中土体强制位移、集中地基弹簧、土体动剪切模量等参数取值对计算结果影响显著;对于动力时程方法,线弹性方法和等效线性化方法的结果较为接近,且变化趋势相同。  相似文献   

13.
为了准确评价小城镇灾害易损性所处的状态,进而为制定小城镇防灾减灾规划提供科学依据,提出了基于贝叶斯公式的小城镇灾害易损性随机评价方法。该方法通过计算小城镇灾害易损性单个指标属于某个评价级别的概率,由最大似然分类原则确定单个易损性指标的评价级别,进而采用最大加权概率原则推求其综合评价级别。通过实例计算分析,并与模糊评估方法、可拓物元评价方法进行比较验证,说明了该方法的可行性及其简单、实用的特点。  相似文献   

14.
超高层结构地震剪力响应由振型分解反应谱法得到的结果经常不能满足规定的最小剪力系数要求。为此,文章简述剪力系数的概念和调整方法,以具有不同剪力系数的两个模型对比分析结构弹性、弹塑性地震响应差异,探讨剪力系数对超高层结构地震响应的影响。以通过强度和刚度调整使最小剪力系数满足规范要求的两个模型,分析不同调整方法引起的结构响应的合理性。结果表明:满足最小剪力系数的结构的弹性基底剪力大、层间位移角较小,结构的弹塑性位移响应也较小,受力状态优于不满足最小剪力系数的结构,安全性得到了提高。结构弹性倾覆力矩需求和弹塑性基底剪力按刚度调整大于按强度调整;结构弹塑性最大顶点位移和层间位移角响应相差不大,但出现刚度大\,层间位移角也大的与抗震理论相悖的情况;在满足抗震要求的情况下,构件的受力状态则是按强度调整更优,构件截面更加经济合理。  相似文献   

15.
针对钢筋混凝土高层建筑抗震时程分析输入地震波选择问题,以《建筑抗震设计规范》(GB 50011-2016)设计谱为目标谱,将满足谱匹配原则的加权调幅选波方法与国内学者建议的其它输入地震波选择方法进行了对比研究。以3栋钢筋混凝土高层建筑(15层、30层和44层)为实例,针对8度罕遇地震作用和Ⅱ类场地条件,将上述方法建议的各7条地震波输入结构进行弹塑性时程分析。以结构最大层间位移角均值沿楼层分布为比较参数。结果表明:加权调幅法可用于钢筋混凝土高层建筑抗震时程分析,可以较好地降低结构地震反应均值的离散性。在8度罕遇地震作用条件下,以不同学者建议选择的地震波为输入,高层建筑时程分析结果仍呈现出较大的不同。  相似文献   

16.
高阳  潘华  汪素云 《地震学报》2014,36(4):698-710
介绍了模拟地震动时程的随机有限断层法及近年来对该方法的改进,改进后的随机有限断层法适合模拟中强地震;比较了不同场地方位角的中强地震近场地震动时程与平均伪加速度反应谱(PSA);定量分析了中强地震近场地震动模拟结果的参数敏感性. 结果表明:不同场地方位角的中强地震近场PSA在短周期部分差别较大;应力降是模型中最重要的参数,其对反应谱短周期部分影响最大;几何扩散系数对PSA的整体影响也较为明显. 将随机有限断层法应用到工程安全性评价工作中时,应当重点关注对反应谱短周期部分影响较大的应力降和该区域的几何扩散系数,同时要调查该区域优势场地方位角的分布,更加合理地控制中强地震近场强震动的模拟.   相似文献   

17.
The rocking response of large flexible structures to earthquakes   总被引:1,自引:0,他引:1  
The rocking response of structures subjected to strong ground motions is a problem of ‘several scales’. While small structures are sensitive to acceleration pulses acting successively, large structures are more significantly affected by coherent low frequency components of ground motion. As a result, the rocking response of large structures is more stable and orderly, allowing effective isolation from the ground without imminent danger of overturning. This paper aims to characterize and predict the maximum rocking response of large and flexible structures to earthquakes using an idealized structural model. To achieve this, the maximum rocking demand caused by different earthquake records was evaluated using several ground motion intensity measures. Pulse-type records which typically have high peak ground velocity and lower frequency content caused large rocking amplitudes, whereas non-pulse type records caused random rocking motion confined to small rocking amplitudes. Coherent velocity pulses were therefore identified as the primary cause of significant rocking motion. Using a suite of pulse-type ground motions, it was observed that idealized wavelets fitted to velocity pulses can adequately describe the rocking response of large structures. Further, a parametric analysis demonstrates that pulse shape parameters affect the maximum rocking response significantly. Based on these two findings, a probabilistic analysis method is proposed for estimating the maximum rocking demand to pulse-type earthquakes. The dimensionless demand maps, produced using these methods, have predictive power in the near-field provided that pulse period and amplitude can be estimated a priori. Use of this method within a probabilistic seismic demand analysis framework is briefly discussed.  相似文献   

18.
本文通过对地震反应谱的数值计算,以各种不同频率的最大反应到时为样本进行概率统计,给出了近场地震波不同频率的最大反应到时谱。为采用时程分析法进行结构抗震计算时持续时间的选取提供了依据。  相似文献   

19.
为对比分析5·12汶川地震和3·11东日本大地震的加速度反应谱和结构地震反应特征,挑选132条汶川地震和404条东日本大地震中Ⅱ类场地上的水平向加速度记录,进行统计分析。根据这两次大地震的标准加速度反应谱,给出了拟合谱曲线。将所得拟合谱作为需求谱,分别对6层框架结构和20层框架结构进行了Pushover分析,比较在上述两次大地震下不同框架结构地震反应的差异。结果表明:东日本大地震记录比汶川地震记录具有较明显的长周期地震动特征;两次地震记录的区别在高层框架结构的地震反应上表现得更加明显,东日本大地震记录对具有较长自振周期的结构的地震反应影响更为显著。  相似文献   

20.
陈波  温增平 《地震工程学报》2018,40(6):1295-1305
确定地震动输入样本容量是开展结构动力地震反应分析的重要环节,目前国内外关于地震动输入样本容量的讨论往往忽略或尚难以定量考虑结构地震反应估计的可靠度水平。以一实际钢筋混凝土框架结构为例,首先分析在大样本地震动作用下结构非线性地震反应的统计特征,研究估计结构地震反应时取样本最大值和平均值的差异,然后借助于假设检验分析结构地震反应的概率分布模型,给出基于一致可靠度的地震动样本容量确定方法,并对比分析单周期点、多周期点、谱值匹配调整地震动及人工合成地震动对样本容量需求的影响,为保证在小样本地震动输入下结构地震反应估计值满足给定可靠度和容许误差提供分析方法和判断依据。本文方法适应于定量确定不同结构类型和不同地震强度水平下的地震动样本容量需求,对建筑结构抗震性能评估及设计规范研究有一定意义。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号