共查询到20条相似文献，搜索用时 15 毫秒
1.
西南太平洋板块与澳大利亚板块之间的汤加—克马德克俯冲带,是研究地球动力学最重要的区域之一.本文研究根据MIT-P08地震数据,结合板块构造边界、地震活动分布、海岸地形数据等,基于GOCAD软件平台建立三维地震层析成像,对西南太平洋板块的汤加—克马德克俯冲板片进行三维解释.地震层析成像显示汤加—斐济地区地幔至少存在三个"高速"异常体.早期汤加—克马德克俯冲板片穿过地幔转换带,并进入下地幔,最大深度达1600 km.三维构造模型揭示了汤加—克马德克板片在深度600~800 km处存在断折形变,该俯冲板片去褶皱恢复后,测量其俯冲的最大位移达2600 km.汤加—克马德克板片开始快速俯冲的时间至少在30 Ma之前,平均移动速率约为68~104 mm /a.俯冲板片三维构造重建和恢复,可以有效揭示俯冲板片几何学、运动学,为研究深源地震成因、地球深部变化过程和动力学机制提供约束. 相似文献
2.
Summary
Wright andLyons (1981) used a least-squares matching technique (LMM) and an adaptive processing method (ADP) to study the behaviour of slowness and azimuth measurements made on two synthetic interfering wavelets having different arrival vectors and onset times. We have applied these results to the analysis of real array seismograms. Some of the effects generated synthetically are frequently observed on real seismograms of earthquakes recorded at Yellowknife at distances close to 50° and 90°. We have also processed sufficient data to illustrate how the interference phenomenon can be used to confirm the presence of radial velocity anomalies in the lower mantle. NumerousP arrivals from South American earthquakes at distances between 78° and 98° suggest the presence of two radial velocity anomalies at depths close to 2400 and 2730 km below the Caribbean region; these anomalies also appear to vary laterally.Contribution No. 864 from the Earth Physics Branch. 相似文献
3.
Summary Teleseismic arrivals for large earthquakes occurring in the Circum-Pacific seismic source regions have been analysed forP-velocity variations prior to the February 24, 1972, Bear Valley earthquake at several stations in the vicinity of Bear Valley, California. The teleseismic arrivals have been analysed by the method of two-station residuals and corrected for observed azimuthal variations. The data covers the time period of July, 1971, through April, 1972, and suggests that during part of January, 1972, aP-velocity anomaly occurred beneath station BVL 2 km from the epicenter of the magnitude 5.1 Bear Valley event. A maximum vertical travel time delay of 0.15 seconds is observed. No other anomalous behavior associated with this event is suggested by the data for the other stations ranging from 7 to 19 km from the event's epicenter. These results support an anomalous zone of limited size with a maximum horizontal extent of less than 5 km perpendicular and about 10 km parallel to the San Andreas fault relative to the epicenter and confined within a 5 to 10 km portion of the uppermost crust. Also aP-velocity delay for waves travelling essentially along the intermediate stress axis would imply in this case that theP-velocity anomaly is caused by a bulk modulus mechanism such as that proposed by the dilatancy-fluid flow theory. 相似文献
4.
Detailed regional body wave tomographic inversion of the Western Pacific region has been performed using P and S travel times from common sources and receivers, with a joint inversion in terms of bulk-sound and shear wave-speed variations in the mantle. This technique allows the separation of the influence of bulk and shear moduli, and hence a more direct comparison with mineral physics information. The study region is parameterized with cells of side 0.5° to 2° and 19 layers to a depth of 1500 km, while the rest of the mantle was parameterized with 5×5° cells with 16 layers between the surface and the core–mantle boundary. A simultaneous inversion is made for regional and global structures to minimize the influence of surrounding structures on the regional image. A nested iterative inversion scheme is employed with local linearization and three-dimensional ray tracing through the successive model updates. The results of the regional tomographic inversion reveal the penetration of a subducted slab below the 660 km discontinuity at the Kurile–Kamchatka trench, while flattening of slabs above this depth is observed in the Japan and Izu–Bonin subduction zones on both the bulk-sound and shear wave-speed images. The penetration of a subducted slab down to a depth of at least 1200 km is seen below the southern part of the Bonin trench, Mariana, Philippine, and Java subduction zones. Fast shear wave-speed perturbations associated with the subducted slabs, down to the 410 km transition zone, are larger than the comparable bulk-sound perturbations for all these subduction zones except the Philippines. The bulk-sound signature for the subducted slab is more pronounced than for shear in the Philippines, Talaud, New Guinea, Solomon, and Tonga subduction zones, where penetration of the slab into the middle mantle is observed. Variation in the amplitude ratio between bulk-sound and shear wave-speed anomalies correlates well with the subduction parameters of the descending slab. Slabs younger than 90 Ma at the trench show bulk-sound dominance in the upper mantle, while older slabs have a stronger shear wave-speed signature. Spreading of the fast shear wave-speed zone between 800 and 1000 km is observed in the areas of deep subducted slab penetration, but has no comparable expression in the bulk-sound images. This high-velocity feature may reflect physical or chemical disequilibria introduced to the lower mantle by subducted slabs. 相似文献
5.
A two-dimensional numerical convection model in cartesian geometry is used to study the influence of trench migration on the ability of subducted slabs to penetrate an endothermic phase boundary at 660 km depth. The transient subduction history of an oceanic plate is modelled by imposing plate and trench motion at the surface. The viscosity depends on temperature and depth. A variety of styles of slab behaviour is found, depending predominantly on the trench velocity. When trench retreat is faster than 2–4 cm/a, the descending slab flattens above the phase boundary. At slower rates it penetrates straight into the lower mantle, although flattening in the transition zone may occur later, leading to a complex slab morphology. The slab can buckle, independent of whether it penetrates or not, especially when there is a localised increase in viscosity at the phase boundary. Flattened slabs are only temporarily arrested in the transition zone and sink ultimately into the lower mantle. The results offer a framework for understanding the variety in slab geometry revealed by seismic tomography. 相似文献
6.
The time evolution of negative buoyancy of a subducting slab is modelled from the beginning of subduction under various kinematic conditions (dip angle and subduction velocity). The calculations take into account the thermal and density effects of the variations of the thermophysical parameters with temperature and pressure, and of phase transitions. The magnitude of the negative buoyancy increases during subduction of oceanic lithosphere, up to values in the (2–4) × 1013 N m−1 range when the tip of the slab reaches a depth of 600–700 km. If continental material arrives at the trench and is subducted, the downward buoyancy decreases by an amount proportional to the volume of the subducted continental crust. Assuming that subduction stops when the buoyancy becomes zero, and that delamination of the continental crust or slab breakoff do not occur, the maximum downdip length of the subductable continental crust is estimated as a function of the dip angle, subduction velocity and geometry of the margin. In most cases, subduction of continental material down to depths of 100–250 km is possible, and continental subduction can continue for times up to 10–15 Ma if the velocity is low. These estimates are not significantly affected by the hypothetical occurrence of a metastable olivine wedge within the slab, and could be lower bounds if the lower continental crust is mafic and transforms to eclogite. 相似文献
7.
Using P-wave travel time data from local seismicity, the crustal structure ofthe central and southern part of Colombia was determined. A very stableand narrow range of possible velocity models for the region was obtainedusing travel time inversion. This range of models was tested with earthquakelocations to select the best velocity model. The 1D velocity modelproposed has five layers over a halfspace, with interfaces at depths of 4,25, 32, 40 and 100 km and P-wave velocities of 4.8, 6.6, 7.0, 8.0, 8.1and 8.2 km/sec, respectively. According to this model the Moho lies at32 km depth on average. For P-waves, the station corrections range from–0.62 to 0.44 sec and for S-wave they range from –1.17 to 0.62 sec.These low variations in station residuals indicate small lateral velocitychanges and therefore the velocity model found should be well suited forearthquake locations and future starting model for 3D tomography studies.Using this new velocity model, the local earthquakes were relocated. Theshallow seismicity, < 30 km, clearly shows the borders betweentectonic plates and also the main fault systems in the region. The deepseismicity, > 80 km, shows two subduction zones in the country: theCauca subduction zone with a strike of N120°E, dip of 35°and thickness of 35 km, and the Bucaramanga subduction zone which has,for the northern part, a strike of N103°E, dip of 27° andthickness undetermined and, for the southern part, a strike ofN115°E, dip of 40° and thickness of 20 km. Based ondifferences of thickness of brittle crust in the subducted slab and spatialdistribution of the seismicity, the Cauca and Bucaramanga subduction zonesseem to represent independent processes. The Cauca subduction seems tobe connected to the process of the Nazca plate being subducted under theNorth Andes Block. In the Bucaramanga subduction zone, the transitionbetween southern and northern parts and changes in geometry of the slabseem to be gradual and there is no evidence of a tear in the slab, howeverthe local seismicity does not allow us to determine which plate or plates arebeing subducted. The Bucaramanga nest appears to be included into thesubducted slab. 相似文献
8.
J.Arthur Snoke I.Selwyn Sacks Hiromu Okada 《Physics of the Earth and Planetary Interiors》1974,9(3):199-206
Various workers have constructed models to explain a class of anomalous arrivals at Peruvian and Chilean stations from deep-focus South American earthquakes. These arrivals are shear waves with a later arrival time, a higher frequency content, a longer duration and a lower apparent velocity than direct S. Our models assume that there is a sufficiently sharp discontinuity at the upper interface of the descending lithospheric slab between depths of 80 and 250 km to provide efficient reflection (≈0.1) for S-waves incident from below. The observed travel times require a single S-to-S reflection at this interface if the J-B velocity-depth model is modified to allow for 7% higher velocities down to a depth of 300 km (excluding the crust). The locus of required reflection points correlates well with the upper boundary of the observed seismicity (strike and dip angles within 5°) and Q for the proposed path is consistent with the frequency content of the anomalous arrivals. Thus the existence of these arrivals requires a dipping interface down to about 250 km, but, contrary to the wave-guide model of Isacks and Barazangi, cannot be used to infer a continuous lithospheric slab down to the deep-focus earthquakes (h #62; 500 km). 相似文献
9.
Subduction zone seismicity and the thermo-mechanical evolution of downgoing lithosphere 总被引：1，自引：0，他引：1
In this paper we discuss characteristic features of subduction zone seismicity at depths between about 100 km and 700 km, with emphasis on the role of temperature and rheology in controlling the deformation of, and the seismic energy release in downgoing lithosphere. This is done in two steps. After a brief review of earlier developments, we first show that the depth distribution of hypocentres at depths between 100 km and 700 km in subducted lithosphere can be explained by a model in which seismic activity is confined to those parts of the slab which have temperatures below a depth-dependent critical valueT
cr.Second, the variation of seismic energy release (frequency of events, magnitude) with depth is addressed by inferring a rheological evolution from the slab's thermal evolution and by combining this with models for the system of forces acting on the subducting lithosphere. It is found that considerable stress concentration occurs in a reheating slab in the depth range of 400 to 650–700 km: the slab weakens, but the stress level strongly increases. On the basis of this stress concentration a model is formulated for earthquake generation within subducting slabs. The model predicts a maximum depth of seismic activity in the depth range of 635 to 760 km and, for deep earthquake zones, a relative maximum in seismic energy release near the maximum depth of earthquakes. From our modelling it follows that, whereas such a maximum is indeed likely to develop in deep earthquake zones, zones with a maximum depth around 300 km (such as the Aleutians) are expected to exhibit a smooth decay in seismic energy release with depth. This is in excellent agreement with observational data. In conclusion, the incoroporation of both depth-dependent forces and depth-dependent rheology provides new insight into the generation of intermediate and deep earthquakes and into the variation of seismic activity with depth.Our results imply that no barrier to slab penetration at a depth of 650–700 km is required to explain the maximum depth of seismic activity and the pattern of seismic energy release in deep earthquake zones. 相似文献
10.
基于国际地震中心的P波走时数据和层析成像反演方法,获得了具有较高分辨率的马尼拉俯冲带的深部速度模型.结果表明,（1）高速的南海俯冲板片沿马尼拉俯冲带的俯冲形态随纬度发生变化,在14°N和16°N之间,板片俯冲角度较大,俯冲深度可达400~500 km,在17°N附近,俯冲板片角度和深度较南部变小,而在18°N附近,俯冲板片以近垂直角度俯冲到地幔转换带;（2）17°N和18°N之间俯冲角度的变化意味着南海板片发生了撕裂;（3）在14°N附近,南海板片由300 km以上的近垂直俯冲转为200~300 km深度的近水平展布,与震源分布存在较大的差异,表明南海板片发生了撕裂,并且导致410 km间断面抬升.根据成像结果计算的不同位置南海板片的俯冲长度和时间表明,南海板片俯冲之前的面积为现今面积的两倍,14°N最先开始发生俯冲,并由南向北扩展. 相似文献
11.
《Physics of the Earth and Planetary Interiors》2004,141(4):303-326
The results of detailed investigation into the geometry of distribution of earthquakes around and below the volcanoes Korovin, Cleveland, Makushin, Yake-Dake, Oshima, Lewotobi, Fuego, Sangay, Nisyros and Montagne Pelée at convergent plate margins are presented. The ISC hypocentral determinations for the period 1964-1999, based on data of global seismic network and relocated by Engdahl, van der Hilst and Buland, have been used.The aim of this study has been to contribute to the solution of the problem of location of source regions of primary magma for calc-alkaline volcanoes spatially and genetically related to the process of subduction. Several specific features of seismicity pattern were revealed in this context. (i) A clear occurrence of the intermediate-depth aseismic gap (IDAG) in the Wadati-Benioff zone (WBZ) below all investigated active volcanoes. We interpret this part of the subducted slab, which does not contain any teleseismically recorded earthquake with magnitude greater than 4.0, as a partially melted domain of oceanic lithosphere and as a possible source of primary magma for calc-alkaline volcanoes. (ii) A set of earthquakes in the shape of a seismically active column (SAC) seems to exists in the continental wedge below volcanoes Korovin, Makushin and Sangay. The seismically active columns probably reach from the Earth surface down to the aseismic gap in the Wadati-Benioff zone. This points to the possibility that the upper mantle overlying the subducted slab does not contain large melted domains, displays an intense fracturing and is not likely to represent the site of magma generation. (iii) In the continental wedge below the volcanoes Cleveland, Fuego, Nisyros, Yake-Dake, Oshima and Lewotobi, shallow seismicity occurs down to the depth of 50 km. The domain without any earthquakes between the shallow seismically active column and the aseismic gap in the Wadati-Benioff zone in the depth range of 50-100 km does not exclude the melting of the mantle also above the slab. (iv) Any earthquake does not exist in the lithospheric wedge below the volcano Montagne Pelée. The source of primary magma could be located in the subducted slab as well as in the overlying mantle wedge. (v) Frequent aftershock sequences accompanying stronger earthquakes in the seismically active columns indicate high fracturing of the wedge below active volcanoes. (vi) The elongated shape of clusters of epicentres of earthquakes of seismically active columns, as well as stable parameters of the available fault plane solutions, seem to reflect the existence of dominant deeply rooted fracture zones below volcanoes. These facts also favour the location of primary magma in the subducting slab rather than in the overlying wedge.We suppose that melts advancing from the slab toward the Earth surface may trigger the observed earthquakes in the continental wedge that is critically pre-stressed by the process of subduction. However, for definitive conclusions it will be necessary to explain the occurrence of earthquake clusters below some volcanoes and the lack of seismicity below others, taking into account the uncertainty of focal depth determination from global seismological data in some regions. 相似文献
12.
The compression wavefield is efficiently converted to shear-wave energy at post-critical angles in areas of high impedance contrast at the sea floor. We have analysed mode-converted shear waves in a data set acquired with a hybrid marine/land geometry in Isfjorden, Svalbard. Through a kinematic 2D ray-tracing modellingV
p/Vs ratios for part of the uppermost 5km of the crust are obtained. Low values (V
p
/V
s
=1.65) are tentatively associated with the section of Devonian sandstones which appears to attain a minimum thickness of 1.5km below 3 km depth about 10km west of Kapp Thorden. 相似文献
13.
Seismic provinces in Peru and northern Chile may be defined in direct relation to the geometry of parts of Nazca plate that are being subducted under the Americas plate. Recent tectonism and calc-alkaline volcanism appear also to have a clear relationship to that same geometry of the subducted slab. Under northern and central Peru, the slab plunges at 10–15° to the northeast, and becomes almost horizontal farther east; at surface in the same region, recent calc-alkaline volcanism is absent and recent tectonics are mostly compressional. Under southern Peru and northern Chile, the slab plunges regularly at about 30° to the east; at the surface, calc-alkaline volcanism is still active and recent tectonism appears to be mostly extensional. 相似文献
14.
Sean C. Solomon 《Physics of the Earth and Planetary Interiors》1975,11(2):97-108
The top of the olivine-spinel phase change in subducted oceanic lithosphere can be located by the travel times of seismic waves which have propagated through the slab. P-wave travel-time residuals from deep earthquakes in the Tonga island are observed at Australian seismic stations are grouped according to the depth of the earthquake. The change in mean residual with a change in earthquake depth is related to the velocity contrast between slab and normal mantle at that depth. The curve mean residual versus earthquake depth displays a region of markedly increased slope between earthquake depths of about 250 and 350 km. The most probable explanation of this observation is an elevation by 100 km of the olivine-spinel phase change within the relatively cooler slab. No evidence was found for vertical displacements within the slab of any deeper phase changes.A temperature contrast between slab and normal mantle of about 1,000°C at 250 km depth is implied. This finding confirms current thermal models for subducted lithosphere but is inconsistent with the global intraplate stress field unless only a few percent of the negative buoyancy force at subduction zones is transmitted to the surface plates. 相似文献
15.
In this paper, regionalP-wave upper mantle structure is investigated using slant-stack velocity analysis of short-period earthquake data recorded at station MAJO (Matsushiro, Japan). Shallow earthquakes from 1980–1986 within 35° of MAJO are used to construct a common receiver gather. Processing of the wavefield data includes focal depth and static time corrections, as well as deterministic deconvolution, in order to equalize pulse shapes and align wavelets on the first arrivals. The processed wavefield data are slant stacked and interatively downward continued to obtain a regional upper mantle velocity model. The model includes a low velocity zone between 107 and 220 km. Beneath the LVZ, the velocity increases smoothly down to the discontinuity at 401 km. In the transition zone, the velocity model again increases linearly, although there is some suggestion of further complexity in the downward continued wavefield data. At the base of the transition zone, a second velocity discontinuity occurs at 660 km, with a linear velocity gradient below. In addition to slant-stack analysis, travel times and synthetic seismograms are computed and compared with the processed and unprocessed wavefield data. 相似文献
16.
Western Yunnan is a region with intensive tectonic activity and serious earthquake risk. It is of significant importance to study three dimensional crustal structure of this region to understand the tectonic setting and disaster mechanism. Densification and digitalization of seismic networks in this region provides an opportunity to study the velocity structure with bulletin data. In this study, we collect P-wave data of 10 403 regional earthquakes recorded by 79 seismic stations from January 2008 to December 2010. In addition to first arrivals data (Pg with epicentral distance less than 200 km and Pn), the Pg (or P) data with epicentral distance more than 200 km are also considered as later direct arrivals in the tomographic inversion. We also compare the quantity and the quality of the seismic data before 2010 and after 2010. The test results show that adding the follow-up Pg phase can effectively improve the inversion ability of crustal imaging, and quantity and the data quality are significantly improved since 2010. The tomographic results show that: (1) The Honghe fault zone, which is the major fault systems in this region, may cut through the entire crust, and the velocity contrasts between two sides at lower crust beneath the Honghe fault are estimated at higher than 10%, while the velocity difference below Nujiang fault zone extends only in the upper crust; (2) Most of the earthquakes in the region occurred at the interface of high-velocity media and low-velocity media, i.e., the areas with high velocity gradient, which has been validated in other areas. 相似文献
17.
Receiver functions of teleseismic waveforms recorded at four Hungarian permanent broadband stations have been analyzed using
semilinearized and stochastic inversion methods to estimate the crustal thickness and S wave velocity structure in the Pannonian
Basin. The results of both inversion methods agree well with the crustal thicknesses obtained by previous seismic refraction
and reflection studies in the regions which are densely covered with seismic lines (28 and 27 km in westernmost and southern
Hungary, respectively) and suggest a thicker crust compared to what was known before beneath the Transdanubian and Northern
Ranges (34 and 33 km, respectively). The comparison of the one-dimensional shear wave velocity models derived by the different
inversion methods shows that, in case of simple, smoothly varying structures, the results do not differ significantly and
can be regarded as absolute velocities. Otherwise, the recovered velocity gradients agree, but there are differences in the
absolute velocity values. The back-azimuthal variations of both radial and tangential receiver functions are interpreted as
dipping structure and as waves sampling different geological areas. The signature of the deep structure on low-frequency receiver
functions suggests a strong velocity contrast at the 670-km discontinuity. The vanishing 410-km boundary may be attributed
to the remnant of a subducted oceanic slab with increased Poisson’s ratio in the transition zone. 相似文献
18.
Anastasia A. Kiratzi 《Pure and Applied Geophysics》1993,140(3):391-402
Recent and historical seismicity as well as reliable fault plane solutions are used to study the active deformation caused by the occurrence of intermediate depth (60–170 km) earthquakes of the Vrancea region, Rumania. In this area, located in the southeastern part of the Carpathian arc, the westward subduction of the Carpathian trench has terminated, leaving continental lithosphere, at present, at the arc. The principalT axis of the intermediate depth events trends N159°E and has a plunge of 74°, which is the same as the dip of the subducted plate. TheP axis has a trend of 314° and a shallow plunge of 15°. The analysis of the moment tensor of six focal mechanisms showed that the dominant mode of deformation of the subducted lithosphere is a down-dip extension at a rate of about 2 cm/yr, based on seismicity data. 相似文献
19.
Abstract Focal mechanisms of intermediate-depth earthquakes within the subducted Ryukyu slab indicate a systematic pattern of down-dip extension in the northern part under Kyushu. These mechanisms switch rapidly around the Tokara channel to down-dip compression in the southern part toward Taiwan. This intriguing pattern of strain segmentation, together with the differences between the slab geometry of the northern and southern parts, has raised the question of whether stress segmentation, as defined possibly by a tear fault, might exist in the slab. However the Ryukyu trench has a concave oceanward shape in the northern segment while it is convex in the southern oceanward part toward Taiwan. The inflection zone is located around the Tokara channel. The concept of Gaussian curvature of a curved surface suggests that the along-arc variation of the geometric configuration of a subducted slab is related to the shape of the trench. This is in order to accommodate the lateral membrane deformation of the slab as the oceanic lithosphere subducts from a spherical shell to the geometry delineated by the Wadati-Benioff zone. The membrane deformation regime of the subducted Ryukyu slab and its relation with the trench geometry was examined by assuming that the subduction be modelled by the flow field of a thin viscous sheet. A projection operator was utilized to compute the membrane strain-rate tensor of an arbitrary non-Euclidean surface. Numerical experiments indicated that the northern segment of the slab was dominated by lateral compression and down-dip extension and the southern part by lateral extension and down-dip compression. This transition is sharply located near the Tokara channel. These patterns were compatible with what had been observed from studies of focal mechanisms, suggesting that the strain segmentation might be controlled, at least in part, by the lateral membrane deformation within the slab due to the trench shape in this subduction zone. The slab geometry was predicted by minimizing the integrated total dissipation power; this revealed distinct features that were consistent with observations. This implies that the slab geometry may also be affected by the membrane deformation in a systematic fashion. 相似文献
20.
Using teleseismic data recorded along a transect, which we call VEOX (for Veracruz-Oaxaca seismic line), of 46 broadband stations installed across the Isthmus of Tehuantepec in southern Mexico, we obtained receiver functions and stacked them to study the Moho topography and back projected them to visualize the subducted slab geometry beneath the isthmus. We observed a back-azimuth dependent Moho thickness across the transect, particularly beneath the Los Tuxtlas Volcanic Field. Also, we observed the Cocos plate which subducts with an angle of 26° between 140 and 310?km from the trench. Comparison with regional seismicity indicates that it occurs below the oceanic crust. 相似文献