共查询到20条相似文献，搜索用时 15 毫秒
1.
Nirmala Kumari Amares Chattopadhyay Abhishek K. Singh Sanjeev A. Sahu 《Acta Geophysica》2017,65(1):189-205
The present study investigates the propagation of shear wave (horizontally polarized) in two initially stressed heterogeneous anisotropic (magnetoelastic transversely isotropic) layers in the crust overlying a transversely isotropic gravitating semi-infinite medium. Heterogeneities in both the anisotropic layers are caused due to exponential variation (case-I) and linear variation (case-II) in the elastic constants with respect to the space variable pointing positively downwards. The dispersion relations have been established in closed form using Whittaker’s asymptotic expansion and were found to be in the well-agreement to the classical Love wave equations. The substantial effects of magnetoelastic coupling parameters, heterogeneity parameters, horizontal compressive initial stresses, Biot’s gravity parameter, and wave number on the phase velocity of shear waves have been computed and depicted by means of a graph. As a special case, dispersion equations have been deduced when the two layers and half-space are isotropic and homogeneous. The comparative study for both cases of heterogeneity of the layers has been performed and also depicted by means of graphical illustrations. 相似文献
2.
The present paper investigates the effect of voids on the propagation of surface waves in a homogeneous micropolar elastic
solid medium which contains a distribution of vacuous pores (voids). The general theory for surface wave propagation in micropolar
elastic media containing voids has been presented. Particular cases of surface waves (Rayleigh’s, Love’s and Stoneley’s) in
micropolar media which contain vacuous pores have been deduced from the above general theory. Discussions have been made in
each case to highlight the effect of voids and micropolar character of the material medium separately. Their joint effect
has also been studied in details. Modulation of Rayleigh wave velocity has been studied numerically. It is observed that Love
waves are not affected by the presence of voids. 相似文献
3.
含裂隙双相各向异性介质中的地震波传播 总被引：5，自引：0，他引：5
基于各向异性介质和含裂隙双相介质中的地震波传播理论,导出了具有四阶对称轴的含裂隙双相各向异性介质的本构关系与波传播的运动方程．指出在含裂隙双相各向异性介质中可能传播６种类型的准纵横波,即快纵波ＱＰ１,慢纵波ＱＰ２,两个分裂的快横波ＱＳＶ１,ＱＳＨ１和两个分裂的慢横波ＱＳＶ２,ＱＳＨ２．并以平面波传播为例作了进一步分析 相似文献
4.
We study the propagation of elastic waves that are generated in a fluid‐filled borehole surrounded by a cracked transversely isotropic medium. In the model studied the anisotropy and borehole axes coincide. To obtain the effective elastic moduli of a cracked medium we have applied Hudson's theory that enables the determination of the overall properties as a function of the crack orientation in relation to the symmetry axis of the anisotropic medium. This theory takes into account the hydrodynamic mechanism of the elastic‐wave attenuation caused by fluid filtration from the cracks into a porous matrix. We have simulated the full waveforms generated by an impulse source of finite length placed on the borehole axis. The kinematic and dynamic parameters of the compressional, shear and Stoneley waves as functions of the matrix permeability, crack orientation and porosity were studied. The modelling results demonstrated the influence of the crack‐system parameters (orientation and porosity) on the velocities and amplitudes of all wave types. The horizontally orientated cracks result in maximal decrease of the elastic‐wave parameters (velocities and amplitudes). Based on the fact that the shear‐ and Stoneley‐wave velocities in a transversely isotropic medium are determined by different shear moduli, we demonstrate the feasibility of the acoustic log to identify formations with close to horizontal crack orientations. 相似文献
5.
实验室可以产生两种振动模式的横波，一种是剪切振动，另一种是扭转振动.本文利用扭转换能器观测了扭转横波在各向异性样品中的传播特性.实验表明，无偏振方向的扭转波在各向异性介质中会以两种不同速度传播，并出现波的分裂现象，其快慢波的速度值与剪切横波的快慢横波速度一致.用扭转波换能器接收时，快慢扭转波的波形振幅不受各向异性方位影响，表现为无方向性.通过两块不同来源的均匀各向异性样品，用实验观测方式初步揭示了各向异性介质中扭转波的一些传播特征. 相似文献
6.
The dependence of shear‐wave splitting in fractured reservoirs on the properties of the filling fluid may provide a useful attribute for identifying reservoir fluids. If the direction of wave propagation is not perpendicular or parallel to the plane of fracturing, the wave polarized in the plane perpendicular to the fractures is a quasi‐shear mode, and therefore the shear‐wave splitting will be sensitive to the fluid bulk modulus. The magnitude of this sensitivity depends upon the extent to which fluid pressure can equilibrate between pores and fractures during the period of the deformation. In this paper, we use the anisotropic Gassmann equations and existing formulations for the excess compliance due to fracturing to estimate the splitting of vertically propagating shear waves as a function of the fluid modulus for a porous medium with a single set of dipping fractures and with two conjugate fracture sets, dipping with opposite dips to the vertical. This is achieved using two alternative approaches. In the first approach, it is assumed that the deformation taking place is quasi‐static: that is, the frequency of the elastic disturbance is low enough to allow enough time for fluid to flow between both the fractures and the pore space throughout the medium. In the second approach, we assume that the frequency is low enough to allow fluid flow between a fracture set and the surrounding pore space, but high enough so that there is not enough time during the period of the elastic disturbance for fluid flow between different fracture sets to occur. It is found that the second approach yields a much stronger dependence of shear‐wave splitting on the fluid modulus than the first approach. This is a consequence of the fact that at higher wave frequencies there is not enough time for fluid pressure to equilibrate and therefore the elastic properties of the fluid have a greater effect on the magnitude of the shear‐wave splitting. 相似文献
7.
Anisotropic elastic full‐waveform inversion of walkaway vertical seismic profiling data from the Arabian Gulf 
下载免费PDF全文
下载免费PDF全文 John C Owusu Marwan Charara Scott Leaney Allan Campbell Shujaat Ali Igor Borodin Les Nutt Henry Menkiti 《Geophysical Prospecting》2016,64(1):38-53
Borehole seismic addresses the need for high‐resolution images and elastic parameters of the subsurface. Full‐waveform inversion of vertical seismic profile data is a promising technology with the potential to recover quantitative information about elastic properties of the medium. Full‐waveform inversion has the capability to process the entire wavefield and to address the wave propagation effects contained in the borehole data—multi‐component measurements; anisotropic effects; compressional and shear waves; and transmitted, converted, and reflected waves and multiples. Full‐waveform inversion, therefore, has the potential to provide a more accurate result compared with conventional processing methods. We present a feasibility study with results of the application of high‐frequency (up to 60 Hz) anisotropic elastic full‐waveform inversion to a walkaway vertical seismic profile data from the Arabian Gulf. Full‐waveform inversion has reproduced the majority of the wave events and recovered a geologically plausible layered model with physically meaningful values of the medium. 相似文献
8.
This study investigates the reflection and transmission of plane SH-waves in two semi-infinite anisotropic magnetoelastic media. The lower half-space is considered as initially stressed and inhomogeneous. The density of lower half-space is taken exponentially varying with depth. The solutions for half-spaces are obtained analytically. The expressions for reflection and transmission coefficient are obtained in the closed form subject to continuity conditions at the interfaces of anisotropic magnetoelastic half-spaces and the Snell’s law. It is found that these coefficients depend on the initial stress, inhomogeneity parameter, the magnetoelastic coupling parameter, and the angle at which wave crosses the magnetic field of the half-spaces. Numerical computations are performed for these coefficients for a specific model of two different anisotropic magnetoelastic half-spaces. The numerical results are illustrated by the graph of reflection and transmission coefficient versus the angle of incidence. In general, as the initial stress increases the reflection and transmission coefficient increases, the affect is more prominent for more than 10 GPa. Inhomogeneity in the density of the material also increases the reflection and transmission coefficient. The anisotropic magnetoelastic parameter and the angle at which the wave crosses the magnetic field for both the half-spaces have a quite significant effect on the reflection and transmission coefficient. 相似文献
9.
10.
This paper deals with the investigation of the effect of surface stress and conductivity on the propagation of surface wave
in isotropic, homogeneous, elastic media under the action of a primary magnetic field. Formulation of the general surface
wave propagation problem has been made, and the corresponding frequency equation has been derived. Frequency equations for
Rayleigh wave, surface shear wave and Stoneley wave have been deduced from that of general surface wave as special cases.
The effects of surface stress and magnetic field on the wave velocities and attenuation factors of Rayleigh wave and surface
shear wave are shown by numerical calculations and graphs. Some important wave velocity equations, as obtained by other authors,
have been deduced as special cases from the wave velocity equation for Stoneley wave. It is found that the combined effect
of surface stress and magnetic field modulates the wave velocity ratios and attenuation factors of Rayleigh wave and surface
shear wave to a considerable extent. 相似文献
11.
Pure-mode wave propagation is important for applications ranging from imaging to avoiding parameter tradeoff in waveform inversion. Although seismic anisotropy is an elastic phenomenon, pseudo-acoustic approximations are routinely used to avoid the high computational cost and difficulty in decoupling wave modes to obtain interpretable seismic images. However, such approximations may result in inaccuracies in characterizing anisotropic wave propagation. We propose new pure-mode equations for P- and S-waves resulting in an artefact-free solution in transversely isotropic medium with a vertical symmetry axis. Our approximations are more accurate than other known approximations as they are not based on weak anisotropy assumptions. Therefore, the S-wave approximation can reproduce the group velocity triplications in strongly anisotropic media. The proposed approximations can be used for accurate modelling and imaging of pure P- and S-waves in transversely isotropic media. 相似文献
12.
Abhishek Kumar Singh Anil Negi Ram Prasad Yadav Amit Kumar Verma 《Journal of Seismology》2018,22(5):1263-1274
During the occurrence of earthquake, the shear wave propagates in the rocks present inside/at the Earth’s crust. The propagation of shear wave may lead to the progression of punch present inside the rock medium. As a result of this, substantial stress accumulated at the vicinity of propagating punch inside rock medium which significantly affects the stability of various geological and human-made structure and, hence, may cause failure of structure. Therefore, the analysis of stress concentration at the vicinity of punch moving due to shear wave propagation has become prominent in the area of seismology. In the present paper, an analytical perspective has been employed to discuss the influence of velocity of moving punch associated with the propagation of shear wave on developed dynamic stress concentration (DSC) in three types of pre-stressed vertical transversely isotropic (VTI) poroelastic media viz. granite (an igneous rock); sandstone (a sedimentary rock); and marble (a metamorphic rock). The closed form expression of DSC for the force of constant intensity has been derived with the aid of Weiner-Hopf technique along with Galilean and two-sided Fourier integral transformations. The noticeable influence of different affecting parameters (viz. velocity of moving punch associated with the shear wave propagation, horizontal compressive/tensile initial stresses, vertical compressive/tensile initial stress, porosity, and anisotropy parameter) on dynamic stress concentration has also been reported. Numerical computation and graphical illustrations have been carried out for the aforementioned three different types of porous rocks to investigate the profound impact of affecting parameters on DSC. Moreover, some noteworthy peculiarities have also been derived from the obtained expression of dynamic stress concentration. 相似文献
13.
Propagation of magneto-elastic waves in a perfectly conducting plate extending to infinity in vacuum
C. M. Purushothama 《Pure and Applied Geophysics》1965,61(1):60-68
Summary The effects of a uniform external magnetic field on the propagation of waves in a homogeneous, infinitely conducting flat plate with free boundaries have been studied. It has been found that in general all the three types of waves —P, SV andSH waves—are coupled and the influence may be more pronounced in coupling the symmetric and antisymmetric types of motions in every mode.When the magnetic field is parallel to the plane faces and transverse to the direction of wave propagation, the shear wave polarized parallel to the field is purely elastic whereas the coupledP andS V waves are magnetoelastic and exhibit dispersion strikingly similar to the non-magnetic case, provided the electro-magnetic radiation into the surrounding free space is neglected.The results reported in an earlier communication [1]2) are also confirmed. 相似文献
14.
The phase and group velocity surfaces are essential for wave propagation in anisotropic media. These surfaces have certain features that, especially, for shear waves result in complications for modelling and inversion of recorded wavefields. To analyse wave propagation in an anisotropic model, it is important to identify these features in both the phase and group domains. We propose few characteristics for this analysis: the energy flux angle, decomposed in the polar and azimuth angle correction angles and enhancement factor, which is able to characterize both singularity points and triplication zones. The very simple equation that controls the triplications is derived in the phase domain. The proposed characteristics are illustrated for elastic and acoustic anisotropic models of different symmetry classes. 相似文献
15.
弹性介质各向异性研究沿革、现状与问题 总被引：17，自引：8，他引：17
各向异性介质中地震波的传播研究是当今地震学研究领域中的前沿课题之一,同时也是地震学中难题之一.由于地下岩石的各向异性主要表现在:地震波速度随传播方向发生变化;不同类型体波间相互耦合;横渡发生分裂:面波速度频散依赖于传播方向等.薄互层与裂隙定向分布等产生视各向异性,放在石油地震勘探、地震预测和岩石层物理与动力学研究中有极大潜力和应用前景,并受到广泛重视.为此,本文较为详尽地讨论了弹性介质中地震波各向异性研究的沿革,简述了国内外现今取得的主要研究成果以及目前尚存在的和有待解决的一些主要问题.最后对我国在各向异性介质中地震波动、检测和应用等研究提出了一些看法. 相似文献
16.
17.
IntroductionBasedontheresearchresultSofmanyintemalandextemalseismologiSts,mediuminseis-mogeniczonemaybethecrackedinordermediumsaturatedwithfluid(airorwater),namely,two-phaseanisotropicmedium.Inseismicprospecting,oilorgasreservoirrockmayaPproachtothecrackedtwo-phaseanisotropicmediumtoo.Therefore,thefiJrtherstudyonpropagaiontheoryofseismicwavesintWo-phaseanisotropicmediumpossessestheoreticalsignificanceandaPPlicationprospects-Inthispaper,onthebasisofthetheoryofseismicwavesinanuid-sbedporousso… 相似文献
18.
Summary Elastic wave propagation problem has been studied in the composite medium — a gravitating liquid layer overlying an elastic half-space. Assuming moving normal pressure load on the free surface, an attempt has been made to study the order of disturbance on the earth's surface. In the discussion asymptotic values of the displacement, components have been considered for small values of the parameter. 相似文献
19.
20.
The effect of orthorhombic anisotropy and its implication for oil recovery and reservoir exploitation 总被引：1，自引：0，他引：1
Jamal M. Assad 《Geophysical Prospecting》2005,53(1):121-129
Results of an experimental study of shear‐ and compressional‐wave propagation in an orthorhombically anisotropic medium are presented. The experiments were performed on a physical model consisting of two sets of fractures. The first set consisted of orientated rubber inclusions simulating weak material‐filled cracks. The second set consisted of a system of closely spaced parallel fractures simulated by thin plates of epoxy resin, superimposed orthogonally on the first set. Three cases of fracture orientations within the model were identified and studied. Case 1 is analogous to a jointed fracture reservoir with one vertical set of fluid‐filled cracks or fractures and one non‐filled horizontal set. This case is referred to as JFV. Case 2 is analogous to a double fracture reservoir with one horizontal set of fluid‐filled fractures or cracks and one non‐filled vertical set. This is referred to as DFH. Case 3 is analogous to a double fracture reservoir with two vertical sets of fractures or cracks, with only one fluid‐filled. Case 3 is referred to as DFV. A pulse transmission method was performed on all three modelled cases along the three principal axes. A directional variation in the compressional‐ and shear‐wave velocities, as well as distinct shear‐wave splitting, was observed. The elastic constants for each case were determined and differences between them were noted and compared with the controlled results of both layered (transverse isotropy, TI) and vertically fractured (azimuthally anisotropic models, VF) media. The differences in elastic moduli and velocities indicate the potential of recognizing the different fracture orientations and suggest an approach to designing a method of drilling to further enhance oil recovery and reservoir exploitation. 相似文献