共查询到20条相似文献，搜索用时 192 毫秒
1.
2.
为了提高装配式剪力墙的抗震性能,提出并设计了一片暗柱内置H型钢装配式内藏钢桁架混凝土剪力墙及一片暗柱内置圆钢管装配式内藏钢桁架混凝土剪力墙,其中H型钢竖向连接采用顶底角钢复合连接,圆钢管竖向连接采用端板焊接.通过对试件进行低周反复加载试验,得到剪力墙试件的破坏模式、滞回曲线、承载力、延性、残余变形、刚度退化和耗能能力等... 相似文献
3.
为研究加固后锈蚀箍筋约束混凝土柱的抗震性能,设计16个钢筋混凝土矩形柱,对加速锈蚀后的试件采用外包钢及CFRP、GFRP材料进行加固处理,随后开展低周往复荷载试验,以研究不同加固材料、不同加固包裹方式、不同黏结材料等因素对锈蚀箍筋约束混凝土柱滞回曲线、骨架曲线、刚度衰减、延性性能及耗能能力等抗震性能指标的影响。研究结果表明:(1)与未锈蚀柱相比,加固后的箍筋锈蚀柱以弯剪破坏为主,CFRP加固试件较GFRP加固试件具有更高的承载力,但破坏时延性不如GFRP加固试件;(2)外包钢加固试件、CFRP加固试件、GFRP加固试件的耗能能力较未锈蚀试件分别增大222.3%、123.9%、98.5%,延性系数也相应增大45.3%、22.3%、25.6%。总之,外包钢加固对箍筋锈蚀柱抗震性能的提升最大,CFRP加固次之,但优于GFRP加固;整包加固优于环包加固;环氧树脂胶黏结略优于水泥基灌浆料黏结。 相似文献
4.
钢筋混凝土带暗支撑核心简体抗震性能试验研究 总被引：13，自引：3，他引：10
本文在带暗支撑剪力墙研究的基础上,进一步提出了带暗支撑核心筒体,通1/6缩尺的1个带暗支撑筒体结构和1个普通筒体结构的低周反复荷载试验,比较分析了它们的承载力、刚度、延性、滞回特性、耗能能力及破坏机制。试验表明,带暗支撑筒体比普通筒体的抗震性能明显提高。 相似文献
5.
6.
为研究非对称配钢钢骨混凝土柱的抗震性能,基于12根T形配钢钢骨混凝土柱的拟静力试验研究进行非线性数值模拟,了解其破坏机制、承载力、延性及耗能能力,探讨轴压比、配钢率、剪跨比对抗震性能的影响。结果表明,低周反复荷载作用下T形配钢钢骨混凝土柱滞回曲线饱满,具有良好的延性和耗能能力。在峰值荷载前,数值模拟结果与试验结果吻合较好。轴压力在一定范围内提高了试件承载力,但降低了延性;增大配钢率能提高试件的承载力、刚度和延性,使得峰值荷载后试件的性能退化趋于平缓;剪跨比对试件破坏形态有显著影响,随剪跨比的增大试件延性性能提高。 相似文献
7.
The seismic behavior of steel reinforced high strength and high performance concrete(SRHC)frame columns was investigated through pseudo-static experiments of 16 frame columns with various shear span ratios,axial compression ratios,concrete strengths,steel ratios and stirrup ratios.Three kinds of failure mechanisms are presented and the characteristics of experimental hysteretic curves and skeleton curves with different design parameters are discussed.The columns’ductility and energy dissipation were quantitatively evaluated based on seismic resistance.The research results indicate that SRHC frame columns can withstand extreme bearing capacity,but the abilities of ductility and energy dissipation are inferior because of SRHC’s natural brittleness.As a result,the axial load ratio should be restricted and some construction measures adopted,such as increasing the stirrup ratio.This research established effect factors on the bearing capacity of SPHC columns.Finally,an algorithm for obtaining ultimate bearing capacity using the flexural failure mode is established based on a modified planesection assumption.The authors also established equations to determine shearing baroclinic failure and shear bond failure based on the accumulation of the axial load force distribution ratio.The calculated results of shear bearing capacity for different failure modes were in good agreement with the experimental results. 相似文献
8.
为探究局部锈蚀矩形截面钢筋混凝土（RC）桥墩重度震损加固后的抗震性能,本文对拟静力破坏后的6个矩形截面RC桥墩试件进行扩大截面加固。通过加载试验,对加固桥墩试件从破坏形态、滞回特性、水平承载力、位移延性、侧向刚度以及耗能等方面进行了系统分析。结果表明:相比于普通箍筋,横向施加预应力的改进扩大截面加固方式对破坏后桥墩试件的抗震性能修复成效更佳;在同等位移幅值下,锈蚀率不断增大,桥墩试件抗震性能呈现逐渐降低的趋势;钢筋锈蚀位置上移,加固后桥墩试件的抗震性能提升;轴压比加大,加固后桥墩试件承载力和侧向刚度增大,但延性降低。 相似文献
9.
钢筋混凝土分体柱的抗震机理 总被引：4，自引：0，他引：4
为揭示钢筋混凝土分体柱的抗震机理,在以前模型试验基础上,考虑隔板与单元柱之间的非线性接触及钢筋与混凝土之间的黏结滑移,数值模拟了钢筋混凝土分体柱的抗震性能。结果表明:分体柱可实现变短柱为“长”柱的设想;分体柱具有理想的变形能力和延性,延性系数达到4.0;分体柱的刚度随变形增加呈指数衰减,后期刚度退化较为缓和;分体柱具有较高的耗能能力,其耗能系数达1.44;隔板与单元柱的切向接触应力较小,可忽略隔板对单元柱的变形协调作用。进一步验证了钢筋混凝土分体柱具有理想的抗震性能,完善和发展了钢筋混凝土分体柱的设计理论和应用技术。 相似文献
10.
采用有限元软件ABAQUS,以锈蚀率（0%、5%、10%、15%和20%）为变量,对5根钢筋混凝土柱的力学性能进行了数值模拟,研究各试件的滞回性能、骨架曲线、延性及耗能能力,分析钢筋锈蚀率对承载力、延性、耗能和塑性铰转动能力的影响。研究结果表明:模拟分析得到的锈蚀钢筋混凝土柱的强度和变形与试验结果吻合较好,建立的有限元模型可用于锈蚀钢筋混凝土柱的力学性能分析;混凝土开裂前,锈蚀构件的力学性能基本与未锈蚀构件相同,混凝土开裂后,构件的承载力、屈服荷载、极限位移、延性等均随钢筋锈蚀率的增大而降低;轻度锈蚀构件的滞回性能和破坏形式与未锈蚀构件类似,随着钢筋锈蚀率逐渐增大,滞回环的饱满程度降低,“捏拢”现象严重,滞回曲线由“弓形”逐渐发展成“反S形”,耗能能力降低,破坏形式趋于脆性破坏,位移延性系数、平均耗能系数等指标逐渐下降。 相似文献
11.
不同连梁跨高比带暗支撑双肢剪力墙抗震性能试验研究 总被引：2，自引：0，他引：2
为探讨不同连梁跨高比带暗支撑双肢剪力墙的抗震性能,进行了2组连梁跨高比分别为1．0和1．5的4个4层双肢剪力墙1／4缩尺模型的抗震性能试验研究。较系统地分析了结构的刚度及其退化过程以及承载力、延性、耗能、破坏机制和破坏特征等。结果表明,连梁跨高比相对小的带暗支撑双肢剪力墙抗震性能较好。承载力计算结果与实测值符合较好。 相似文献
12.
纤维增强混凝土异形柱框架抗震性能的试验研究 总被引：6，自引：1，他引：5
通过薄弱部位应用纤维增强的混凝土异形柱框架和同条件下无纤维异形柱框架的拟静力试验研究,对比了两榀框架的破坏特征、出铰顺序、承载能力和延性、滞回特性、耗能能力及刚度退化等抗震性能指标。研究表明：应用纤维增强的异形柱框架承载能力和整体刚度显著提高,薄弱部位破坏程度减轻,耗能能力有所增强,纤维可以改善异形柱框架薄弱部位的抗震性能,提高异形柱框架结构的整体抗震能力。 相似文献
13.
14.
地震时砌体结构窗间墙易发生破坏,为了提高其抗震性能,对高宽比为1的2组共4片墙体,其中:2片为双层打包带加固墙体,2片为原墙,进行了拟静力试验,研究墙体的破坏形态、水平承载力、滞回曲线和耗能等抗震性能。试验发现原墙发生剪切破坏,加固后墙体发生摇摆破坏,加固改变了墙体破坏模式,加固后墙体滞回曲线饱满但有捏笼,破坏荷载、延性和耗能能力都有提高,破坏时未发生剥离,表明双层打包带加固法有效地提高了窗间墙体抗震性能,对承受较大竖向应力墙体效果更好,建议加固时要加强加固层与窗下和窗上墙体的连接。 相似文献
15.
Reinforced concrete (RC) frame structures are one of the mostly common used structural systems, and their seismic performance is largely determined by the performance of columns and beams. This paper describes horizontal cyclic loading tests often column and three beam specimens, some of which were designed according to the current seismic design code and others were designed according to the early non-seismic Chinese design code, aiming at reporting the behavior of the damaged or collapsed RC frame strctures observed during the Wenchuan earthquake. The effects of axial load ratio,shear span ratio, and transverse and longitudinal reinforcement ratio on hysteresis behavior, ductility and damage progress were incorporated in the experimental study. Test results indicate that the non-seismically designed columns show premature shear failure, and yield larger maximum residual crack widths and more concrete spalling than the seismically designed columns. In addition, longitudinal steel reinforcement rebars were severely buckled. The axial load ratio and shear span ratio proved to be the most important factors affecting the ductility, crack opening width and closing ability, while the longitudinal reinforcement ratio had only a minor effect on column ductility, but exhibited more influence on beam ductility. Finally, the transverse reinforcement ratio did not influence the maximum residual crack width and closing ability of the seismically designed columns. 相似文献
16.
为研究FRP加固对装配式梁柱节点及整体框架结构抗震性能的影响,本文基于OpenSEES有限元程序,建立了某装配式梁柱节点的有限元计算模型,以相关试验为基础,比较验证了所建有限元模型的可靠性。同时选用合适的FRP约束混凝土本构关系来表征FRP对混凝土性能的提升作用,设计3种装配式梁柱节点FRP加固方案,并通过有限元数值模拟,分析比较了节点承载力、滞回曲线和位移延性的差异,考察了FRP包裹层数等因素对节点承载力的影响。随后对装配式框架结构设计了3种FRP加固方式,并选取3条地震波进行结构动力时程分析以考察结构抗震性能。结果表明：FRP环向包裹加固及纵向加固能分别有效提高节点的延性能力和承载能力;FRP加固的装配式框架结构具有更好的延性及耗能能力,能有效增强结构的整体抗震性能,为装配式结构FRP加固设计提供参考。 相似文献
17.
Guo Lanhui Ma Xinbo Li Ran§ Zhang Sumei* School of Civil Engineering Harbin Institute of Technology Harbin China 《地震工程与工程振动(英文版)》2011,10(1):65-73
The seismic performance of composite steel plate shear walls (CSPSWs) that consist of a steel plate shear wall (SPSW) with
reinforced concrete (RC) panels attached to one or both sides by means of bolts or connectors is experimentally studied. The
shear wall is connected to the frame beams but not to the columns. This arrangement restrains the possible out-of-plane buckling
of the thin-walled steel plate, thus significantly increasing the bearing capacity and ductility of the overall wall, and
prevents the premature overall or local buckling failure of the frame columns. From a practical viewpoint, these solutions
can provide open space in a floor as this type of composite shear walls with a relatively small aspect ratio can be placed
parallel along a bay. In this study, four CSPSWs and one SPSW were tested and the results showed that both CSPSWs and SPSW
possessed good ductility. For SPSW alone, the buckling appeared and resulted in a decrease of bearing capacity and energy
dissipation capacity. In addition, welding stiffeners at corners were shown to be an effective way to increase the energy
dissipation capacity of CSPSWs. 相似文献
18.
轴压比是影响剪力墙抗震性能的一个主要因素,直接决定其延性性能。本文对两组共六个高剪力墙1/3缩尺的试件模型进行了不同轴压比下的低周反复荷载试验,研究了轴压比对内藏钢桁架混凝土组合剪力墙抗震性能的影响,对比了各试件的承载力、刚度及其退化过程、延性、滞回特性及破坏特征。试验表明:随着轴压比的提高其试件的承载力提高但延性下降;不同轴压比下内藏钢桁架混凝土组合剪力墙均能明显提高钢筋混凝土剪力墙的抗震性能。 相似文献
19.
Seismic behavior and strength capacity of steel tube‐reinforced concrete composite columns 
下载免费PDF全文
下载免费PDF全文 The steel tube‐reinforced concrete (ST‐RC) composite column is a novel type of composite column, which consists of a steel tube embedded in RC. In this paper, the seismic behavior of ST‐RC columns is examined through a series of experiments in which 10 one‐third scale column specimens were subjected to axial forces and lateral cyclic loading. The test variables include the axial force ratio applied to the columns and the amount of transverse reinforcement. All specimens failed in a flexural mode, showing stable hysteresis loops. Thanks to the steel tube and the high‐strength concrete it is filled with, the ST‐RC column specimens had approximately 30% lower axial force ratios and 22% higher maximum bending moments relative to the comparable RC columns when subjected to identical axial compressive loads. The amount of transverse reinforcement made only a small difference to the lateral load‐carrying capacity but significantly affected the deformation and energy dissipation capacity of the ST‐RC columns. The specimens that satisfied the requirements for transverse reinforcement adopted for medium ductile RC columns as specified by the Chinese Code for Seismic Design of Buildings (GB 50011‐2010) and EuroCode 8 achieved an ultimate drift ratio of around 0.03 and a displacement ductility ratio of approximately 5. The design formulas used to evaluate the strength capacity of the ST‐RC columns were developed on the basis of the superposition method. The predictions from the formulas showed good agreement with the test results, with errors no greater than 10%. Copyright © 2013 John Wiley & Sons, Ltd. 相似文献
20.
高轴压比下钢管混凝土边框组合剪力墙抗震性能试验研究 总被引：8，自引：1，他引：7
钢管混凝土边框组合剪力墙是一种适用于高层及超高层建筑的新型组合剪力墙。轴压比是影响剪力墙抗震性能的一个主要因素,高层建筑底部轴压比较大。本文进行了1/4缩尺的1个普通钢筋混凝土剪力墙模型和1个钢管混凝土边框组合剪力墙模型在高轴压比下的低周反复荷载试验。在试验研究基础上,对比分析了剪力墙的承载力、延性、刚度及其衰减过程、滞回特性、耗能能力及破坏特征,建立了钢管混凝土边框组合剪力墙的承载力计算模型,计算结果与实测结果符合较好。研究表明:在高轴压比下钢管混凝土边框组合剪力墙与普通剪力墙相比抗震性能显著提高。 相似文献